Database Info

[Q] [X8] Baseband update problem.

Hi there!
Well, here is the deal, im with an Xperia X8, running android 2.1 and i wanted to root the phone so then i could change the rom and other sort of things.
So well, i was reading the guide and it said that it was the best to have the latest version, which was baseband 015 and the kernel kernel 2.1.1.A.0.6
So i downloaded the .ftf file with that baseband, downloaded the flashtool, sent the .ftf file into the "firmware" folder inside the flashtool folder. Run the program, select the firmware, and follow the instructions of turning off the phone, press the back button while connecting the Mini USB, and it started installing the new firmware.
Apparently, it was okay, it succed, and the program said that i had to turn on my phone and tick a couple of options, i did that and i wanted to check if everything was okay.
The baseband was okay, it showed the 015 part instead of 006, but the kernel part was 2.0.2.A.0.47
And the thing is that now the wifi of the phone is not working, the android market doesnt work, the navigator either, sms, calls, etc.
So, is there a way to fix it or going back to the previous firmware to get it working fine again? and if i have to go to the previous firmware (baseband 006 kernel 2.0.2.A.0.24) can i root the phone and install roms without problem.
Sorry for my bad english, im from argentina.
Goodbye!

[RESOLVED] Cannot re-flash radio firmware on 9020a no matter what.

I've tried just about everything to flash a new version of the radio firmware on my 9020a. I've used the Radio Flashing Guide and tried every version available for the 9020a. Each time, the flash reports that it was successful, but no matter which one I choose, baseband still shows I'm running i9020aucke1 when I boot it back up.
I've also flashed the stock ICS OTA update 4.04 for the 9020a, thinking "well, THAT has to do it." but still I'm stuck on cke1.
Are there permissions that may be wrong? Is there anything else I can do? I want to flash a new radio because e1 is terrible for me. It won't switch between "3g" to "H" and just spins it's wheels and I get no data. Sometimes I get ZERO signal. If I reboot or switch Airplane Mode on & off, data comes back and works for a while, but then reverts back to working like crap.
Thanks a lot.
Update
I was trying to flash via Clockworkmod. I used ADB FASTBOOT and the radio is now on J1.
So, if Clockworkmod isn't working, use ADB FASTBOOT.

metalgeek said:
I've tried just about everything to flash a new version of the radio firmware on my 9020a. I've used the Radio Flashing Guide and tried every version available for the 9020a. Each time, the flash reports that it was successful, but no matter which one I choose, baseband still shows I'm running i9020aucke1 when I boot it back up.
I've also flashed the stock ICS OTA update 4.04 for the 9020a, thinking "well, THAT has to do it." but still I'm stuck on cke1.
Are there permissions that may be wrong? Is there anything else I can do? I want to flash a new radio because e1 is terrible for me. It won't switch between "3g" to "H" and just spins it's wheels and I get no data. Sometimes I get ZERO signal. If I reboot or switch Airplane Mode on & off, data comes back and works for a while, but then reverts back to working like crap.
Thanks a lot.
Click to expand...
Click to collapse
What recovery and what version are you using?

[Q] Xperia J Emergency Calls Only

Hello
I own an Xperia J with an unlocked bl and have flashed many roms on it. Yesterday, the phone started to not want to connect to the internet (mobile data not WiFi) so I found this curious and rebooted the phone and tried re-downloading internet settings but nothing fixed it. I factory reset the ROM (not the phone) but now I couldn't even make calls/texts as the phone was stating 'Emergency Calls Only' and after going through the phones first boot setup, a window popped up saying the phone could not connect to the SIM. In the end, I changed roms (running Doomsday ROM at the time of the error's start) but still the same issue. Tried CM, same issue. Now on stock JB and the problem still consists. I can't really afford a new phone at the current time and my Z1 is being borrowed by my dad. Any help would be much appreciated.

ifti786 said:
Hello
I own an Xperia J with an unlocked bl and have flashed many roms on it. Yesterday, the phone started to not want to connect to the internet (mobile data not WiFi) so I found this curious and rebooted the phone and tried re-downloading internet settings but nothing fixed it. I factory reset the ROM (not the phone) but now I couldn't even make calls/texts as the phone was stating 'Emergency Calls Only' and after going through the phones first boot setup, a window popped up saying the phone could not connect to the SIM. In the end, I changed roms (running Doomsday ROM at the time of the error's start) but still the same issue. Tried CM, same issue. Now on stock JB and the problem still consists. I can't really afford a new phone at the current time and my Z1 is being borrowed by my dad. Any help would be much appreciated.
Click to expand...
Click to collapse
Try to flash first the ICS stock rom. Then flash custom rom.

zephy09 said:
Try to flash first the ICS stock rom. Then flash custom rom.
Click to expand...
Click to collapse
I already tried that

[Q] Wifi not working on stock 4.4.2

Hi!
I have Razr HD from germany.
I was on Stock 4.1.2, that update from OTA to 4.4.2 and now can't connect to any networks.
Short history:
I was on 4.1.2, unlock bootloader, root, flash some CM10 then broke display and buy new phone(Moto X). Several weeks ago i completly broke my Moto X, by new glass(from XT926) and power up my Razr. I want Lolipop, so i start googling about how to install on Razr HD CM12.1 and notice, that i need upgrade to stock 4.4.2, and than install CM12.1.
I have done mistake and flash using RSD stock 4.4.2 from XT926(VZW_XT926_4.4.2-KDA20.62-15.1_CFC_1FF.xml). Don't clearly remeber what i do after that. as i know, i try install CM11.1, but it rebooting in start screen. After that i notice, that i flash wrong rom.
I flash using RSD 4.1.2(9.8.2Q-8-XT925_VQUL-1601_USERSIGNED_S7_USAVANQUO2DE02C.0R_LSAVNQJBO2DE _P014_A004_CFC.xml). All was working fine(wifi, bluetooth, gps, no rebooting). I upgrade from OTA to 4.4.2. Bluetooth is working, but wifi cant connect to networks. I see in settings all available networks, but can't connect to them. And if i flash using TWRP CM12.1(or CM11) in welcome page it rebooting. if i disable wlan module(i try to rename it to wlan.ko.back) all work fine, but wifi and bluetooth not working,
Can anybody help me? I stuck on this and don't know what i need to do to solve this problem...
I attache logcat, dmesg and kmsg....

Guys! I solve problem!
I sppose, that after flashing ROM from XT926 file WCNSS_qcom_wlan_nv.bin changed in persist.
I download other version (i cant post url) change them in persist dir , and now my wifi work!

WI-FI and Bluetooth is not working!

Hello! People please help. I'm not working WI FI and Bluetooth. He rarely worked after a successful restart on cyclic sink firmware 4.2.2. I'm sick of this, I decided to reboot and flash it on a stable firmware version 2.17. But why is the drain is not working 2.17 NFC WI fi Bluetooth. Then again I pierced it at 1.12, 1.14, 1.17. But there again repeated cyclic restart, but it is not working WI FI Bluetooth, NFC for work. I can not understand the smartphone fully working, why stop vayfay and bluetooth does not work? Read all forums and many of the same problem with not working Wifi and Bluetooth. Prompt, whether there is a solution?:смущенный: Smart SONY XPERIA L

Same Problem.... it worked for me after flashing cm 12 for some weeks then it stopped again.... need help... can't live without wifi......

RocketboyKing said:
Same Problem.... it worked for me after flashing cm 12 for some weeks then it stopped again.... need help... can't live without wifi......
Click to expand...
Click to collapse
got any solution?????

RocketboyKing said:
Same Problem.... it worked for me after flashing cm 12 for some weeks then it stopped again.... need help... can't live without wifi......
Click to expand...
Click to collapse
I couldn't understand the question clearly .
Could explain it to me??!
If the WiFi didn't work after flashing the latest firmware I think you should Check the ftf file maybe it's not for c2105 (or you mobile model) COZ I read that the different between these two devices is just networking, So get the suitable one for your device model(if this was the question)

n78 shadow said:
I couldn't understand the question clearly .
Could explain it to me??!
If the WiFi didn't work after flashing the latest firmware I think you should Check the ftf file maybe it's not for c2105 (or you mobile model) COZ I read that the different between these two devices is just networking, So get the suitable one for your device model(if this was the question)
Click to expand...
Click to collapse
Model- C2104
At first everything was working fine in original firmware ,
Even after flashing cm12.1 everything was fine,
once updated to cm13 later there is a problem of wifi and bluetooth sometimes it works fine and at some point mobile will reboot by itself later on both wifi and bluetooth doesn't work (They cant be turned on)
I re flashed original firmware,
re flashed cm12.1,Even tried many roms (Thunderzap,Resurrection_Remix,Temasek) but still problem remains same.

sidbi said:
Model- C2104
At first everything was working fine in original firmware .
Click to expand...
Click to collapse
Try this it may work:
First of all try to change the ftf file (download other one)
If didn't work flash this boot.IMG via fastboot on stock ROM just on stock ROM.
After flashing it flash the kernal and Fota kernal from the same ftf via flashtool .
As I told you flash it on stock ROM then flash the kernal and the fora kernal

n78 shadow said:
Try this it may work:
First of all try to change the ftf file (download other one)
If didn't work flash this boot.IMG via fastboot on stock ROM just on stock ROM.
After flashing it flash the kernal and Fota kernal from the same ftf via flashtool .
As I told you flash it on stock ROM then flash the kernal and the fora kernal
Click to expand...
Click to collapse
Can you please provide link of all three please. (which kernels should i flash)

sidbi said:
Can you please provide link of all three please. (which kernels should i flash)
Click to expand...
Click to collapse
For boot.IMG click on this word with yellow color.
For the ftf
Http://www.mediafire.com/?yiak3ktb3m58iwd
Thanks to @Joel16 for the link
I mean by kernal the kernal in the ftf exclude everything while flashing in flashtool except the kernal and the fota kernal

I'm having the same issue. But it started out of nowhere, so I'm guessing its a hardware problem.
After it happened, I flashed almost every kind of ROM and Kernel around here. Nothing worked.
Also I flashed the official Sony's firmware for my country and it still not working.
Tried the PC Companion's repair function, didn't work too.
When I try to turn WIFI on, I get a "fail to load wifi driver" message at logcat.
I'm not new into flashing ROMs, so I'm almost sure it is not a system issue despite the error message I get.