i bought razr hd xt 925 yesterday and it was 4.0.4 and i update it to 4.1.1 after that i use of motochopper to root and unlock bootloader and install cwm recovery and next install cm11
after many bootloop i download and install 4.1.2 sbf official with razr hd toolkit and now wifi never turn on and toggle is gray
i install many modem and many cyanogen rom but still wifi dont work!!!
i install sbf rom with rsd but stiil wifi is dead
in wifi menu mac address is unavailable
please help me
emadtava said:
i bought razr hd xt 925 yesterday and it was 4.0.4 and i update it to 4.1.1 after that i use of motochopper to root and unlock bootloader and install cwm recovery and next install cm11
after many bootloop i download and install 4.1.2 sbf official with razr hd toolkit and now wifi never turn on and toggle is gray
i install many modem and many cyanogen rom but still wifi dont work!!!
i install sbf rom with rsd but stiil wifi is dead
in wifi menu mac address is unavailable
please help me
Click to expand...
Click to collapse
Wifi can on rare occasions get borked if you do not wipe data from recovery first & then go directly the fastboot, rsd flash.
Some Problem, any ideas?
Patrick89bvb said:
Some Problem, any ideas?
Click to expand...
Click to collapse
Wipe data & then restore again
How mean you restore? Backup or flash the zip?
Patrick89bvb said:
How mean you restore? Backup or flash the zip?
Click to expand...
Click to collapse
Rsd lite restore!
No effect. By RSD Lite Restore, Flash CM10 & CM11. Format Data.
Patrick89bvb said:
No effect. By RSD Lite Restore, Flash CM10 & CM11. Format Data.
Click to expand...
Click to collapse
Is your bootloader unlocked?
What steps did you perform?
Yes, my bootloader is unlook.
What are you mean ? (sorry my english is not soo good. )
Patrick89bvb said:
Yes, my bootloader is unlook.
What are you mean ? (sorry my english is not soo good. )
Click to expand...
Click to collapse
Steps
Wipe data , no boot.
Go to fastboot from recovery
Rsd restore the xml needed.
No fix. :I
Patrick89bvb said:
No fix. :I
Click to expand...
Click to collapse
No :l even for stock rom?
No Chance, i think the wifi Modul is broken. :/
Gesendet von meinem Nexus 7 mit Tapatalk
Related
I broke my phone.
I had a Spanish 2.1 defy rooted, and I wanted 2.2 so I installed System recovery and downloaded the UK Blur froyo rom. I installed and everything in the process went well, but I ended up stuck in the Motorola logo. What can I do or flash to the phone? please help me.
I knew stuff about android with my XT720 and Milestone but this phone is really different.
Update: I can't use any firmware either! When I try to flash it says ''failed, unable to charge ini files'' but this was happening even before I restored a backup
Please help me!
if you flashed a 2.2 ROM via RSD Lite, you cant get back to 2.1
go into the RecoveryMode volumedown+power and do a fullwipe (data+cache).
Restart. if that didn't work, than flash another 2.2 ROM with RSD Lite, which must be no older than that one, which you flashed first.
if no, than you'll get back to 2.1, when you go into the bootloader-mode with volumeup+power and flash via RSD Lite a 2.1 ROM ( http://forum.xda-developers.com/showthread.php?t=966537 )
Dodge93 said:
if no, than you'll get back to 2.1, when you go into the bootloader-mode with volumeup+power and flash via RSD Lite a 2.1 ROM ( http://forum.xda-developers.com/showthread.php?t=966537 )
Click to expand...
Click to collapse
I'll try. but everytime I press start on rsd lite it says ''fail''
mtvdeo said:
I'll try. but everytime I press start on rsd lite it says ''fail''
Click to expand...
Click to collapse
I tried but nothing:
''Failed flashing process. Unable to retrive initialization values from INI file (0x729)...Phone connected''
what can I do!??
I tried with this:
JRDNEM_U3_2.59.0_BLUR_P3_SIGN_SIGNED_UCAJRDNEMARAB1B80AA035.0R_USAJORDANOPTUS_P025_A022_M002_HWp3_Service1FF
please, what can i do?
try renaming the file to make it shorter
Peglezn said:
try renaming the file to make it shorter
Click to expand...
Click to collapse
what would that change?
it didn't still the same
so this is the end for my defy?
I'm desperate, please help me
Rsd Lite will give me that error with every firmware I try.
Recovery mode turns on but what can I do?
Which version of RSDLite are you using? Did you tried to download the sbf again?
Did you flashed 2.2 directly or that "downgradable" stuff?
edition- said:
Which version of RSDLite are you using? Did you tried to download the sbf again?
Did you flashed 2.2 directly or that "downgradable" stuff?
Click to expand...
Click to collapse
I did not flash anything. Even before when the phone was working, RSD gave me that error. I got rsd 4.6.
I restored the UK Blur froyo backup with the Recovery menu, and I had made a backup of my 2.1, but I can't access to it. Just to the standard recovery mode.
mtvdeo said:
I did not flash anything. Even before when the phone was working, RSD gave me that error. I got rsd 4.6.
I restored the UK Blur froyo backup with the Recovery menu, and I had made a backup of my 2.1, but I can't access to it. Just to the standard recovery mode.
Click to expand...
Click to collapse
Ok then, it is easy now to do it, you need to get a 2.1 SBF, then use THIS version of RSDLite
Flash, and reboot, if you stuck in bootloop just wipe and then you will be fine
do u have the defy drivers installed?
zencoran said:
do u have the defy drivers installed?
Click to expand...
Click to collapse
The problem is that he was using RSDLite version 4.6, he needs to use 4.9 to work.
edition- said:
Ok then, it is easy now to do it, you need to get a 2.1 SBF, then use THIS version of RSDLite
Flash, and reboot, if you stuck in bootloop just wipe and then you will be fine
Click to expand...
Click to collapse
I downloaded it and installed that, but instead of shwoing 4.9, it says 4.3 and does not recognize any phone (defy, rokr e8)
mtvdeo said:
I downloaded it and installed that, but instead of shwoing 4.9, it says 4.3 and does not recognize any phone (defy, rokr e8)
Click to expand...
Click to collapse
Uninstall all versions of RSDLite that you have, this is 4.9, i'm using it.
Then reinstall again, make sure you have the latest drivers : http://developer.motorola.com/docstools/USB_Drivers/Handset_USB_Driver/?pubid=987654
It's working now, but something wird happened. instead of opening flash image, it just started saying ''flashing phone''.
I guess it's just a mistake.
question, after this 2.1 I flashed and if it works, can I flsh a 2.2 firmware?
which one (with blur)?
thanks again.
update:
I flashed this froyo:
JRDNEM_U3_3.4.2_155-002_DEBLUR_SIGN
it works ok, but 3G and wifi don't work :/
mtvdeo said:
update:
I flashed this froyo:
JRDNEM_U3_3.4.2_155-002_DEBLUR_SIGN
it works ok, but 3G and wifi don't work :/
Click to expand...
Click to collapse
That one doesn't have BLUR as you can see in the name, and i think there are problems flashing directly after 2.21, many people had to go thru 2.51, did you wiped after flash?
mtvdeo said:
update:
I flashed this froyo:
JRDNEM_U3_3.4.2_155-002_DEBLUR_SIGN
it works ok, but 3G and wifi don't work :/
Click to expand...
Click to collapse
Didn't noticed you were from Uruguay, since that is a EU ROM you will have to flash one of this fixes : http://forum.xda-developers.com/showthread.php?t=944258
The "Argentina" one should be fine.
Hi, i've tried to install hydro rom (http://forum.xda-developers.com/showthread.php?t=1750861) on my tf300tg, but when the installation is complete, the device goes into boot loop.
I've used twrp.
Can anyone help me pls?
Thanks a lot!
Jackpot369 said:
Hi, i've tried to install hydro rom (http://forum.xda-developers.com/showthread.php?t=1750861) on my tf300tg, but when the installation is complete, the device goes into boot loop.
I've used twrp.
Can anyone help me pls?
Thanks a lot!
Click to expand...
Click to collapse
wipe, install the rom, let it boot and wait for everything to stabilize, install the "a" pack -without- wiping.
but as it is now 3g wont work with version 4.4
NixZero said:
wipe, install the rom, let it boot and wait for everything to stabilize, install the "a" pack -without- wiping.
but as it is now 3g wont work with version 4.4
Click to expand...
Click to collapse
Thanks for the answer, but I tried several times to install it. The problem is that it was half an hour in boot loop
Jackpot369 said:
Thanks for the answer, but I tried several times to install it. The problem is that it was half an hour in boot loop
Click to expand...
Click to collapse
check the thread... problems with TF300TG(!) not with TF300T...
Blubberor said:
check the thread... problems with TF300TG(!) not with TF300T...
Click to expand...
Click to collapse
so I can not install the Hydro ROM on my TF300tg?
Jackpot369 said:
so I can not install the Hydro ROM on my TF300tg?
Click to expand...
Click to collapse
Anyone can help me? :crying:
Jackpot369 said:
Anyone can help me? :crying:
Click to expand...
Click to collapse
Any news? Please help me :crying:
hello
do wipe etc with CWM
try to install in first the rom for ft300t, reboot => less boot the pad (wait the login page) => then reboot in recovery mode => then install rom for ft330tg with no wipe etc
tadaaa you will boot, but you dont have the 3g activated ....
for having back the 3g, you must back to the original ROM from Asus ...
hakkukakt said:
hello
do wipe etc with CWM
try to install in first the rom for ft300t, reboot => less boot the pad (wait the login page) => then reboot in recovery mode => then install rom for ft330tg with no wipe etc
tadaaa you will boot, but you dont have the 3g activated ....
for having back the 3g, you must back to the original ROM from Asus ...
Click to expand...
Click to collapse
Thanks a lot!! But a way to make e recive call from my tf300tg using the SIM?
Jackpot369 said:
Thanks a lot!! But a way to make e recive call from my tf300tg using the SIM?
Click to expand...
Click to collapse
I already wrote that 3g wont work in my answer, you chose to ignore me, so now you wasted -months- to find that 3g dont works with hydro...
Do you still have the zip file? I can't seem to get it to flash.. just gives me a fail.
NixZero said:
I already wrote that 3g wont work in my answer, you chose to ignore me, so now you wasted -months- to find that 3g dont works with hydro...
Click to expand...
Click to collapse
Emh...no ... I asked if there is any way to make and receive calls using SIM...with OR without hydro rom...
Hello guys,
Need help!
Flashed my Xperia J with CM10, FXP212.
Problem: I don't get network service.
Bluetooth and WiFi seem to work fine.
Thanks for any help
Edit: (If this helps in anyway) I dont see the FreeXP logo on startup, instead I get a green colored battery logo with the LED glowing red and then the CyanogenMod logo.
Edit 2:
I tried restoring the stock ROM from my backup.
The CWM recovery screen says restore complete. So I say" reboot now". It vibrates and then there is nothing on the screen except for the LED glowing red.
So I remove & re-insert the battery. Switch it on, but I can only enter recovery on purple LED glow. It always enters recovery.
So all I am able to do now is enter recovery and nowhere from there
What am I doing wrong?? Help guys!
Try to fastboot the kernel from the previous release.
your device the network locked
same problm with me :screwy:
---------------------------------
Sent from my GT-S5570L using Tapatalk 2
gavster26 said:
Try to fastboot the kernel from the previous release.
Click to expand...
Click to collapse
Hi,
Thanks for the reply.
I tried the boot.img kernel from FXP211 but no help.
saitri said:
your device the network locked
same problm with me :screwy:
---------------------------------
Sent from my GT-S5570L using Tapatalk 2
Click to expand...
Click to collapse
Hi saitri,
Thanks for the reply.
There was no network lock on the stock ROM.
Maybe I miss something here. What exactly is network lock?
JL.93 said:
Maybe I have the solution! Try this:
1) Flash stock rom ICS
2) Flash CM10's kernel with Flashtool
3) Various wipe
4) Flash CM10 with CWM
Fixed?
--- I'm sorry for my English, I translate with Google translator ---
Click to expand...
Click to collapse
Thanks for the reply.
I tried doing that earlier but landed into a bigger problem.
I can't boot in. It always enters recovery. Tried restoring the stock ROM from my backup but didnt work, It doesnt boot. So I press the 'Vol Up' key and it enters recovery.
What might have gone wrong here??
Myuvin said:
Hi saitri,
Thanks for the reply.
There was no network lock on the stock ROM.
Maybe I miss something here. What exactly is network lock?
Click to expand...
Click to collapse
I also do not understand, after I install cm10 210 and there was such a
saitri said:
I also do not understand, after I install cm10 210 and there was such a
Click to expand...
Click to collapse
Hi saitri,
U can flash a stock ROM, either ICS or JB using flashtool. Your phone will be unrooted. Bootloader remains unlocked.
You can then root it and install any other custom ROM. Though I havent installed a custom ROM yet after flashing the stock ROM.
Will let you know when I do it. Meanwhile you can flash a stock ROM. Let me knw if u need any assistance.
All those who replied: Thanks for your support and time.
Hi,today I received a message telling me update saying that the update 4.4.4 update was available.So I download and I install. The phone turns off, turn back on CWM(ClockworkMod),it marks me ''Intall untrusted Package ?''so I made ''Yes , Install untrusted zip".After he told me "Root access possibly lost.Fix?" So I did "Yes , fix root (/system/xbin/su).Then the phone restarts when I get on the menu welcomes 30 sec after it starts,he reboot and it started on the CWM and rest the same question as above and it started on the CWM and rest the same question as above ( ''Intall untrusted Package ?'')i do and again for 20 min. I decided to stop the phone and reset my phone because its breaking my head.
Is what aurrait a kind soul to help me?
thank you
PS:I have root my moto g before the updates and when I unroot (I unroot with SuperSu) I always those problem
Sorry for my bad english :angel:
You're lucky that you got update. That's odd error.
What's your location? None else has received update yet. Try factory resetting or flash stock ROM.
VAMGDroidFan said:
You're lucky that you got update. That's odd error.
What's your location? None else has received update yet. Try factory resetting or flash stock ROM.
Click to expand...
Click to collapse
My location is in France, I did 2 reset (power +vol down) and i have the same problem.What is flash stock ROM and how do you are ?
newman71200 said:
My location is in France, I did 2 reset (power +vol down) and i have the same problem.What is flash stock ROM and how do you are ?
Click to expand...
Click to collapse
That's nice. Read this link.
VAMGDroidFan said:
That's nice. Read this link.
Click to expand...
Click to collapse
But if I install the stock rom, CWM will you it replaced by stock recovery? (because I think the problem comes from CWM for update)
newman71200 said:
But if I install the stock rom, CWM will you it replaced by stock recovery? (because I think the problem comes from CWM for update)
Click to expand...
Click to collapse
yeah, cwm will be replaced with stock recovery as you are restoring stock firmware
bublz654 said:
yeah, cwm will be replaced with stock recovery as you are restoring stock firmware
Click to expand...
Click to collapse
Can I installs the recovery only via fastboot ?
Yes you can flash CWM via fastboot, but you need to do steps again to be able to flash it.
VAMGDroidFan said:
Yes you can flash CWM via fastboot, but you need to do steps again to be able to flash it.
Click to expand...
Click to collapse
How?
Please read FAQ.
VAMGDroidFan said:
Please read FAQ.
Click to expand...
Click to collapse
I managed to install the stock rom and install the update (4.4.4)
thank you very much
Hello, I have a xt925 with KK stock, and before I do s##it my recovery with CWM 6.0.4.4 worked normally
But as I am idiot I tryed to install philz advanced recovery... Ok installed sucessfull... After I tryed to back to my CWM 6.0.4.4 and now I can't open recovery and install any recovery because on promt show me (Variable not supported)...
Can anyone help me ? How will I get my recovery back ?
I have root, I have bootloader unlocked I have everything or almost everything .... please help me
Have you installed the correct version accordingly to your device/BL?
Sent from my Razr HD, Unlocked KKBL, latest CyanogenMod CM11 KK 4.4.4 ROM, ART runtime.
RMarques said:
Have you installed the correct version accordingly to your device/BL?
Sent from my Razr HD, Unlocked KKBL, latest CyanogenMod CM11 KK 4.4.4 ROM, ART runtime.
Click to expand...
Click to collapse
Yes... I know how to do it, the same CWM I installed before I install the philz didn't work
@edit : I did the download of the last version of minimal adb and fastboot, but it didn't work... and my boot loader is already unlocked when I run "fastboot oem unlock" blablabla....
I dont know why I'm not getting to install cwm if I already had it installed
I tryed with mfastboot and erase recovery and flash recovery...
Ican't erase with sucesfull, but I got to flash a new CWM but... When I tryed to acess her my boot logo stay freezed
RaR System said:
I tryed with mfastboot and erase recovery and flash recovery...
Ican't erase with sucesfull, but I got to flash a new CWM but... When I tryed to acess her my boot logo stay freezed
Click to expand...
Click to collapse
Go to this link
http://www.droidrzr.com/index.php/topic/28162-house-of-moto-32/
...and download this fastboot version "SNAPDRAGON FXZ SUPPORT". It has solved all my fastboot problems!
RMarques said:
Go to this link
http://www.droidrzr.com/index.php/topic/28162-house-of-moto-32/
...and download this fastboot version "SNAPDRAGON FXZ SUPPORT". It has solved all my fastboot problems!
Click to expand...
Click to collapse
I need to register in this forum, but this work ? I wont reset my phone right? and work with xt925?
RaR System said:
I need to register in this forum, but this work ? I wont reset my phone right? and work with xt925?
Click to expand...
Click to collapse
Yes, you will.
No, it cant do nothing by itself, its just the correct ADB module for a XT925 device...and it pretty much answer your next question.
RMarques said:
Yes, you will.
No, it cant do nothing by itself, its just the correct ADB module for a XT925 device...and it pretty much answer your next question.
Click to expand...
Click to collapse
"yes, you will" it is the answer if I need reset my phone ?
Before everything was working perfectly and now...
RaR System said:
"yes, you will" it is the answer if I need reset my phone ?
Before everything was working perfectly and now...
Click to expand...
Click to collapse
Just use this fastboot to install any custom recovery you prefer. Dont let your cell phone reboot into the OS or the custom recovery you installed will be replaced by the stock one!
RMarques said:
Just use this fastboot to install any custom recovery you prefer. Dont let your cell phone reboot into the OS or the custom recovery you installed will be replaced by the stock one!
Click to expand...
Click to collapse
Alright. I tryed this now, but my battery is low and ocurred an error because this... I have much luck...
Did you said about don't let my cell phone reboot, but ... How will I use him then?
I can do it ? fastboot erase recovery .... fastboot flash recovery cwm......img
Finally I got and installed TWRP. Thank you so much !
Fomaççy
RaR System said:
Alright. I tryed this now, but my battery is low and ocurred an error because this... I have much luck...
Did you said about don't let my cell phone reboot, but ... How will I use him then?
I can do it ? fastboot erase recovery .... fastboot flash recovery cwm......img
Finally I got and installed TWRP. Thank you so much !
Fomaççy
Click to expand...
Click to collapse
Gr8 stuff man...itd be nice if you click that "Thanks" button at the bottom right corner though!