[Q] AOSP unfortunately not stopped working error - Motorola Atrix 2

I flashed my atrix 2 with Pacman JB 4.3 (official, august 2013 RC1). But I'm getting an error "AOSP unfortunately stopped working" for every few seconds. I tried removing the cache for AOSP under Settings->App. Still no use. I tried flashing the rom again, still the error persists.
And the settings menu is very small ( the list will be on the left and when i click an option, the relevant settings appears on the right ) ( Its more like two frames in one page ). How to change this too ?
gapps installed : gapps-jb-20130813
rom : pac_edison-milestone.1.RC1
Thanks..

Sounds like wrong gapps. But is correct tho. Try again. From start. Format system in bmm. And different gapps. To disable dual pane in setting, open hybrid engine and select 1.6 layout (if I'm not mistaken).
Edit:
You flashed 4.2 jb of pacman. That was why you got such error. Use 4.2 gapps.

Thank you so much. Works Great.. One more query, My atrix 2 is Indian Version. And when I flash with latest JB 4.3 based pacman nightly version, I'm not able to add APN (gprs) settings. When i click add and save the settings, its not getting saved. Its just blank.
I tried re flashing, erasing the cache, etc.
Even when i contacted the customer service ( carrier ), to send me the APN configuration SMS. My phone couldnt receive it. But as soon as i put my sim in another phone, all the config sms got received.
Thanks..

Idk. Mine was working great. Perhap you wanna give APN backup & restore a shot. Available on playstore. Be sure to read instructions there. It works for me major time.

Related

Flashed the newest Slimbean ROM on a NS4G and I can't seem to get MMS to work

So I fully wiped; Data, & Cache. Formatted System and wiped Dalvik Cache. Flashed the ROM and the appropriate gapps everything is running smoothly so far, but I'm having issues receiving MMS messages and I've tried sending from two different devices but still no luck. It brings up the message with the file info and saying downloading in a gray box on the right, but there is no way to view or access it conventionally from what I can see. Anybody out there going through the same thing? SOS
Thanks in advance
might try a bigmem kernal
works with air voodoo bigmem...
even w my krap signal at the house
fwiw
ILLIPINO said:
So I fully wiped; Data, & Cache. Formatted System and wiped Dalvik Cache. Flashed the ROM and the appropriate gapps everything is running smoothly so far, but I'm having issues receiving MMS messages and I've tried sending from two different devices but still no luck. It brings up the message with the file info and saying downloading in a gray box on the right, but there is no way to view or access it conventionally from what I can see. Anybody out there going through the same thing? SOS
Thanks in advance
Click to expand...
Click to collapse
First try a different kernel like the previous person mentioned or try Handcent SMS / MMS application from the market. It always saves me when a new ROM has MMS issues.
Good luck
Vs Nexus S4G using tapatalk2
Any suggestions for a particular kernel?
GNex BlackBean AOKP
Uncheck Auto retrieve from message settings. Then turn your data on and go to that mms you want to see. Then click download. That works for me.
Sent from my Nexus S using Tapatalk 2
one thing people always over looked: some telecom has a separate MMS APN, so if you are using their service, you have to set it up separately from the data one. hope this helps.

Woes of my Infuse

I start with a fresh wipe of my phone and then install BeanStalk with gapps (I'm currently using BS version 4.4.275 with gapps 20140105. Everything is fine for months. Then a couple of apps will start to crash a few times (the camera, dialer, browser and google apps). I've stopped using titanium backup and clockwork mod to restore my data because they were causing issues. Then the force closes become more and more frequent. I ran fix permissions and i have know clue if it helped or not. Then finally all hell breaks loose and everything begins to force close and give errors of no space left on phone. No launcher will stay open everything just bugs out. This seems to be an on going matter. It doesn't seem to resolve no matter what rom I run. I've gone through every folder sizing it and my phone is not out of space. I am getting very frustrated with my Infuse. I don't understand what some of the stuff means in my catlog file. If someone could help I'd greatly appreciate it.
i found out that Google+ and Google Drive might be the cause (such as when you upload or backup your photos to those clouds)
if you have time, go read those last 10 pages of BeanStalks, you will see what others have offered to resolve this issues
as for me, I'd do full wipe, specially format the sdcard0 (keep the Rom and Gapps to your SDcard1), and stop using the two Google services mentioned above. and use another Gapps (I am using the minimal one) Good luck!
Same problem with Unofficial CM 11.2 also
Exactly the same issue I am having with Unofficial CM 11.2 from scott.
I have been using Scott Harts Unofficial CM from 10.1 to 11.2 on my Samsung infuse and each time i notice a pattern.
Each of the above ROMs start out pretty smooth, and the phone works without any issues for 6 months or so. Then occasionally and app or two start crashing. Then in a weeks time all hell breaks loose and almost all apps start crashing such that the phone becomes unusable. Especially trebuchet starts crashing and that is the end of story.
In the past i have noticed this happens a month or so after an updated rom has been released and I used to upgrade to the new one and the cycle continues.
I am currently on the latest Unoffical CM 11_2 (Kitkat) and the appropriate Gapps installed and the same issue has happened twice.
I have tried the following to fix the issue and nothing helps
1. Clear data for trebuchet and a bunch of other apps.
2. Reinstall Gapps
3. Wipe Cache >> Wipe Dalvik Cache
4. Wipe Cache >> Wipe Dalvik Cache > install Gapps
5. Wipe Cache >> Wipe Dalvik Cache > install custom Rom >> install gapps >> wipe cache and dalvik again
The only way I have been able to get it working in the past is
1. Wipe data/factory reset > Clear Cache > clear Dalvik cache and possibly reinstall ROM and gapps (not sure, but I guess factory reset also does the trick)
So my phone is stuck in this mode and I would like to help debug the situation. Can someone help with the next steps? So that I can capture all required information before I do a factory reset .
Unable to get RSA prompt
Well I went ahead with a factory reset, installed Unofficial CM11_2 from Scott. Got the latest gapps from goo.im and phone seems normal again. But that is the expected behavior untill it starts acting up again.
I tried a lot to connect the phone through ADB and each time it remains unauthorized.
I tried on 2 different laptops, Windows 7, Windows Vista as well as Ubuntu - it always remained unauthorized and no matter what i tried ... changing USB ports , OS machines...nothing helped.
I never got the RSA signature prompt on my phone so could not do anything with ADB.
Any body has any ideas ?
hemen_kap said:
Well I went ahead with a factory reset, installed Unofficial CM11_2 from Scott. Got the latest gapps from goo.im and phone seems normal again. But that is the expected behavior untill it starts acting up again.
I tried a lot to connect the phone through ADB and each time it remains unauthorized.
I tried on 2 different laptops, Windows 7, Windows Vista as well as Ubuntu - it always remained unauthorized and no matter what i tried ... changing USB ports , OS machines...nothing helped.
I never got the RSA signature prompt on my phone so could not do anything with ADB.
Any body has any ideas ?
Click to expand...
Click to collapse
This has been an issue for a while, if the problem is showing up like this:
http://forum.xda-developers.com/showthread.php?t=2175261
Honestly haven't tried ADB with the newer stuff (namely Beanstalk), I just know that ADB as been a problem in the past for Scott's ROM's.
joel.maxuel said:
This has been an issue for a while, if the problem is showing up like this:
http://forum.xda-developers.com/showthread.php?t=2175261
Honestly haven't tried ADB with the newer stuff (namely Beanstalk), I just know that ADB as been a problem in the past for Scott's ROM's.
Click to expand...
Click to collapse
Yes, it is the same problem. Any suggestions ? How is the AOSP based Carbon ROM, any idea if it has the same issue too ?
hemen_kap said:
Yes, it is the same problem. Any suggestions ? How is the AOSP based Carbon ROM, any idea if it has the same issue too ?
Click to expand...
Click to collapse
Not sure about the other ROM's. I could go on a flashing journey, but I have two new devices I'm getting adjusted to right now. If you are not tied down to CM (don't know if it's your DD), I would suggest trying Carbon or CyanFox.
Me, I didn't need ADB that much at the time so I stuck with what I have. Not a solution, but I hope you find a ROM that works (partnered with a minimal gapps).
joel.maxuel said:
Not sure about the other ROM's. I could go on a flashing journey, but I have two new devices I'm getting adjusted to right now. If you are not tied down to CM (don't know if it's your DD), I would suggest trying Carbon or CyanFox.
Me, I didn't need ADB that much at the time so I stuck with what I have. Not a solution, but I hope you find a ROM that works (partnered with a minimal gapps).
Click to expand...
Click to collapse
Unfortunately the infuse is the only phone I have (so my DD)...but the lure to test the ADB on carbon is also compelling for me. Let me try moving to a non smart phone and try this out.
OK. So i installed the Carbon KK nightly, and encountered the same issue. adb devices always lists the phone as
0123456789ABCDEF unauthorized.
Also i never received the rsa prompt...
Moreover the device key seems to suggest it is some default value as compared to an actual device key.
Got it Working !!!
Ok so finally got it working.
I moved away from Scott's Unofficial CM11_2 on my daily driver and moved to Carbon ROM. Loving the new rom so far.
Once i moved to this ROM, I started adb on my desktop (adb kill-server, adb start-server) and was waiting
then on phone enabled Developer options and Android debugging over USB and connected the phone to desktop, and zingggg I get the RSA prompt.
One important thing it read is that you phone should be unlocked when you connect it to your desktop, so in case you have things like PIN or gestures that lock your screen....ensure that your screen is not locked when the phone is being connected.
Not sure if this was the issue or if it was the CM rom,,,but issue is resolved, I am loving Carbon...so not going back to CM to check the lockscreen theory....but worth a try for someone who is pulling his/her hair out like i was.
Ciao !!!
---------- Post added at 05:00 PM ---------- Previous post was at 04:41 PM ----------
missed mentioning that do not worry about the device id of 0123456789ABCDEF....i noticed it does not change for me even when adb connects properly.
It is the unauthorised state that needs to change to device.
What's the default launcher on Carbon, or does it give you a choice like Beanstalk?
Will be retiring the Infuse soon, so am thinking on what ROM to put on when I go to sell it (or give away). The requirement is that is not overwhelming to a new user. Cyanogenmod has a lot of customization, but it doesn't necessarily get in the way. I'd call it borderline overwhelming. Beanstalk is quite overwhelming, because you are forced to pick a launcher right from the beginning (even though I like it for the Jellybean qualities).
Because of these, I just may return it to stock, but have it rooted and with CWM.
joel.maxuel said:
What's the default launcher on Carbon, or does it give you a choice like Beanstalk?
Will be retiring the Infuse soon, so am thinking on what ROM to put on when I go to sell it (or give away). The requirement is that is not overwhelming to a new user. Cyanogenmod has a lot of customization, but it doesn't necessarily get in the way. I'd call it borderline overwhelming. Beanstalk is quite overwhelming, because you are forced to pick a launcher right from the beginning (even though I like it for the Jellybean qualities).
Because of these, I just may return it to stock, but have it rooted and with CWM.
Click to expand...
Click to collapse
I do not see any option to select a launcher like Scotts CM had. So i guess there is no direct option to select it.
Quick search in the running apps shows Launcher 3 running, and apk also available in the priv-app folder in rom, so can conclude launcher is Launcher3.
I did not find it overwhelming in any way.
-Hemen
hemen_kap said:
I do not see any option to select a launcher like Scotts CM had. So i guess there is no direct option to select it.
Quick search in the running apps shows Launcher 3 running, and apk also available in the priv-app folder in rom, so can conclude launcher is Launcher3.
I did not find it overwhelming in any way.
-Hemen
Click to expand...
Click to collapse
I flashed it last night (latest nightly), and it gave me the option of either Launcher3 or Google Now Launcher. I think if someone who was new to the device would be stumped a little by this, but would probably select the Google Now one (the question would be would they press once or always) and be done with it.
Having something recognizable runs at an advantage here compared to Beanstalk, where, unless you know CyanogenMod (or have played with a lot of launchers) you wouldn't know what to select. That would be overwhelming.
Anyway, I wiped the data again, breezed through setup (skipped everything but language and time zone), so it's all ready to go. If need be I can get them set up with a network and Google account before I throw them to the wind.
EDIT:
I see why I got the prompt ... I used the Paranoid Android micro apps package, which includes ... the Google Now Launcher.
hemen_kap said:
Exactly the same issue I am having with Unofficial CM 11.2 from scott.
I have been using Scott Harts Unofficial CM from 10.1 to 11.2 on my Samsung infuse and each time i notice a pattern.
Each of the above ROMs start out pretty smooth, and the phone works without any issues for 6 months or so. Then occasionally and app or two start crashing. Then in a weeks time all hell breaks loose and almost all apps start crashing such that the phone becomes unusable. Especially trebuchet starts crashing and that is the end of story.
In the past i have noticed this happens a month or so after an updated rom has been released and I used to upgrade to the new one and the cycle continues.
I am currently on the latest Unoffical CM 11_2 (Kitkat) and the appropriate Gapps installed and the same issue has happened twice.
I have tried the following to fix the issue and nothing helps
1. Clear data for trebuchet and a bunch of other apps.
2. Reinstall Gapps
3. Wipe Cache >> Wipe Dalvik Cache
4. Wipe Cache >> Wipe Dalvik Cache > install Gapps
5. Wipe Cache >> Wipe Dalvik Cache > install custom Rom >> install gapps >> wipe cache and dalvik again
The only way I have been able to get it working in the past is
1. Wipe data/factory reset > Clear Cache > clear Dalvik cache and possibly reinstall ROM and gapps (not sure, but I guess factory reset also does the trick)
So my phone is stuck in this mode and I would like to help debug the situation. Can someone help with the next steps? So that I can capture all required information before I do a factory reset .
Click to expand...
Click to collapse
Hi,
I was using CM 10.1 from Scott for like a year and didn't have any trouble at all, really the best ROM. Only had two small problems: wouldn't film on 720p without bugging, and MHL to HDMI was not working.
Now I installed CM 11, with latest gapps ( didn't know there was a CM11.2 ), and camera issue on filming is the same. But now it's worse, battery life is lasting half the time it was before, and gallery is crap, bugging every time. Did you have the same issues? Tell me the post of CM11.2 please..
Sent from my SGH-I997 using XDA Free mobile app
jloibman said:
Now I installed CM 11, with latest gapps ( didn't know there was a CM11.2 ), and camera issue on filming is the same. But now it's worse, battery life is lasting half the time it was before, and gallery is crap, bugging every time. Did you have the same issues? Tell me the post of CM11.2 please..
Click to expand...
Click to collapse
Not sure about this, but I think CM 11.2 is referred to as KitKat 4.4.4, which would be latest in the CM thread. So you are probably already running it.
Sent from my Asus MeMO Pad 8"
jloibman said:
Hi,
I was using CM 10.1 from Scott for like a year and didn't have any trouble at all, really the best ROM. Only had two small problems: wouldn't film on 720p without bugging, and MHL to HDMI was not working.
Now I installed CM 11, with latest gapps ( didn't know there was a CM11.2 ), and camera issue on filming is the same. But now it's worse, battery life is lasting half the time it was before, and gallery is crap, bugging every time. Did you have the same issues? Tell me the post of CM11.2 please..
Sent from my SGH-I997 using XDA Free mobile app
Click to expand...
Click to collapse
apart from the issues that i mentioned - my experience with CM 11.2 has been great. There are some obvious things like MHL etc that do not work, but those are known issues.
joel.maxuel said:
I flashed it last night (latest nightly), and it gave me the option of either Launcher3 or Google Now Launcher. I think if someone who was new to the device would be stumped a little by this, but would probably select the Google Now one (the question would be would they press once or always) and be done with it.
Having something recognizable runs at an advantage here compared to Beanstalk, where, unless you know CyanogenMod (or have played with a lot of launchers) you wouldn't know what to select. That would be overwhelming.
Anyway, I wiped the data again, breezed through setup (skipped everything but language and time zone), so it's all ready to go. If need be I can get them set up with a network and Google account before I throw them to the wind.
EDIT:
I see why I got the prompt ... I used the Paranoid Android micro apps package, which includes ... the Google Now Launcher.
Click to expand...
Click to collapse
You can download the Nova Launcher from the google play store if you want to have the same experience as with Scotts Beanstalk. I love the carbon ROM but I am so accustomed to the Nova launcher that I cant live without it.
hemen_kap said:
Exactly the same issue I am having with Unofficial CM 11.2 from scott.
I have been using Scott Harts Unofficial CM from 10.1 to 11.2 on my Samsung infuse and each time i notice a pattern.
Each of the above ROMs start out pretty smooth, and the phone works without any issues for 6 months or so. Then occasionally and app or two start crashing. Then in a weeks time all hell breaks loose and almost all apps start crashing such that the phone becomes unusable. Especially trebuchet starts crashing and that is the end of story.
In the past i have noticed this happens a month or so after an updated rom has been released and I used to upgrade to the new one and the cycle continues.
I am currently on the latest Unoffical CM 11_2 (Kitkat) and the appropriate Gapps installed and the same issue has happened twice.
I have tried the following to fix the issue and nothing helps
1. Clear data for trebuchet and a bunch of other apps.
2. Reinstall Gapps
3. Wipe Cache >> Wipe Dalvik Cache
4. Wipe Cache >> Wipe Dalvik Cache > install Gapps
5. Wipe Cache >> Wipe Dalvik Cache > install custom Rom >> install gapps >> wipe cache and dalvik again
The only way I have been able to get it working in the past is
1. Wipe data/factory reset > Clear Cache > clear Dalvik cache and possibly reinstall ROM and gapps (not sure, but I guess factory reset also does the trick)
So my phone is stuck in this mode and I would like to help debug the situation. Can someone help with the next steps? So that I can capture all required information before I do a factory reset .
Click to expand...
Click to collapse
OK the exact same problem has started again today on Carbon ROM. Wonder if this is a Cyanogen thing, as that seems to be common between the two.
Anyone else facing this ?
-Hemen
hemen_kap said:
OK the exact same problem has started again today on Carbon ROM. Wonder if this is a Cyanogen thing, as that seems to be common between the two.
Anyone else facing this ?
Click to expand...
Click to collapse
Hmm, don't think I kept a ROM on my Infuse long enough to encounter this problem (except for my several months with CM 10.1, no issues). As for other phones, I use Jellybean on my semi-retired HTC and did not have this problem (closest I came was when I tried out Fly-On mod - lag closures often). But I don't think It's a Jellybean problem.
I think (and this may have been covered already) this has to do with the piddly datadata partition filling up. One way to check is open a terminal emulator (app on the phone of adb shell) and type:
Code:
df
Look for datadata in that listing. If it is in the 90% range, that spells trouble. If that is the case, you could try one of two solutions.
I don't know what possessed the developers to separate the data partitions in KitKat (I know, for "performance reasons") but leave 1/2 a GB for it. Lower end phones these days give you twice that.
Over the past few years or so I've installed ROMs going back to ICS. 99% of the time there was absolutely no issue. I habitually do a (1) factory wipe, (2) dalvik wipe, (3) system format, (4) sdcard0 format, (5) install ROM zip, (6) install gapps, (7) wipe cache and (8) wipe dalvik.
In the hundreds of ROMs I've installed and tested, 1 or 2 were bad compiles, and everyone soon knew it. They were immediately removed from any host site. So, if you're having issues, (1) install you ROM as above, (2) perhaps install a smaller gapps, and/or (3) check that you're not overloading your phone from the PlayStore.
The last and rarest issue could be your phone, but rule of thumb that works 99% of the time is: (1) assume it's always your fault first, and (2) read, read, read, read, read.

[Q] Question for [ROM][4.4.4][09/28] SlimSaber - i9100 [SlimKat Unofficial Builds]

Hi... I don't have 10 posts, so cannot post directly into the dev thread... and the warning on the page told me to post in Q & A, so I hope I got the right one here... please forum mods, re-allocate if necessary...
I recently updated to fusionjack's latest 4.4.4 release (20141108), from (20140928).
I did a full clean via TWRP (Advanced Wipe - ticked Dalvik Cache, Cache, System, Data and Android Secure) and then an install. The only thing I did post-install, as I do always... is install Titanium Backup, and import phone numbers from SIM card.
However, I am unable to do something I was allowed to do prior in previous builds... adding a custom app entry into the global menu (direct dial). I thought maybe I had too many options so the screen blocked it, so I removed all but 2, and removed the option for bug report and screen recorder to be displayed on the screen. However, that did not make any difference.
If possible, can you see if anyone else is having this issue? I click on other custom apps and they are committed to the global menu, but direct dial is not.
Possible Solution
So... I tried another advanced wipe and clean install.
This time, I did not install Titanium Backup, and did not flash SuperSU (went with the new one that fusionjack injected into his ROM).
I went straight into importing contacts and then to the global menu to add a custom app (direct dial)
Woo hoo, friggin' works! So not sure if there is a clash between two rooting apps here or not... might be worth passing this onto the dev so he or she can check it out...
crap crap crap...
It's doing it again, blocking the addition of a direct dial into the global menu... I might just go back to the release I had earlier... thanks anyways...
You can delete this thread, seems to have been a waste of time... apparently a setting change blocks the addition of a custom app to global menu. It worked with fj's latest build, nothing else touched... soon as I set my phone up completely I tried again and it failed.
Buggered if I know what setting blocks it, but I don't want 10 posts because of this false thread... delete!

general overall color and rom questions

Hay all,
I have several questions/issues that i am hoping someone can help with and or point me to the location for the proper help.
First,
original boost mobile galaxy s5, running 4.4 Rom
Flashed OA6 using ODIN to put 5.0 on
flashed CF/root using ODIN to gain root
flashed Philz recovery
At this stage i have a completely stock rom with root access.
Second i dl several custom roms to try including cryogen, metal rom, and unadulterated. I had the same issues with all of them as follows,
*no data when leaving an area where phone is on wifi
*cannot move apps to sd card
*no voice mail notifications
*gps not working
*phone reads lte but no lte speeds
I did a full wipe of cashe/divlsk cashe (however is spelled) and format for new rom. this did not allow the above to work. Had this issue on 2 s5's.
I have tried the 'fixes' that others have suggested to no avail. I have also tried to send the developers some of these questions with no response (i get they are busy).
After repeating this procedure (back to Stock ODIN/CF Root/Philz/new room) over and over with the same results i decided to STOP after flashing Philz
Then I DL-ed 'root app delete' from the play store. Took off all the crap i didn't want.
Flashed volume boost
installed adw launcher
This 'stock' room is the only one i could use where everything was working correctly.
That being said, i would like to have a dark theme for contacts, system ui, settings, etc. Without having to worry about screwing up everything i have set up for the 15th time.
Additionally, i had quick pic installed and a gallery hidden. Now, quick pic not installed and cannot get that gallery to show back up to use the new 'protection mode'. I have check the permissions using root explorer. They are set to rrw for all. I have cleaned cashe and still can get that gallery to show up.
Any help would be much appreciated. Thanks in advance,
Steve
*I am the same user from above just recovered my prefered email and user name association.
Its been almost a week. Does no one have any ideas? Thanks in advance.

Cannot get Mobile Data to work after installing LineageOS Custom Rom

Hi, I installed the Custom ROM LineageOS on my Samsung S5 phone. I have also added the GAPPS. The Wifi works but cannot get the data to work. I created a new APN and entered the settings carefully but didn’t work. I have tried restarting, removing the battery, removing and re-installing the simm card, deleting the cache from TWRP recovery, but nothing works.
There is a preferred network type and its set to LDE/WCDMA by default so not sure if this needs changing. Someone in a video also suggested changing Bearer inside the APN to include LTE and keep unspecified ticked too. But no luck.
I don’t want to have to go back to the Stock ROM as its slow and sluggish and full of bloatware. The phone runs like lightning using the custom ROM.
There was another thread that suggested downloading the GiffGaff App and let the App download and configure the APN settings automatically. I downloaded the app but can’t see any option for this.
Any ideas?
I had this problem before on other ROMs, usually removing and putting the SIM back in worked for me
edit: sorry- I didn't read the part where you said you removed and put back the SIM

Categories

Resources