chainfire 3d for jellybean - Android General

chainfire 3d for jellybean - Android General

*********ROOT NEEDED********
the days gone when u install the chainfire 3d in jellybean u stuck in bootloop. but in world of android developers their is every thing is possible...
here another mind blowing contibution by xda dev: n0n3m4... is GLTools which is better alternative for chainfire3d for all 2.3+ users.
basically this app for gamer if u know about chainfire3d u also know about this app.
please hit the thank to n0n3m4 : http://forum.xda-developers.com/showthread.php?t=2604723
please take full nandroid backup before install dont blame on me
FEATURES:
1. 16-bit rendering.
2. Lower rendering resolution.
3. Optimize Shadering.
4. Texture resizing.
5. FPS counter.
6. Fake GPU name.
please hit the thanks for my afford to share the app for....
:good::good::good::good::good: Hit the like :good: :good: :good::good::good:

Related

[Patches]Mircromax A110 Baseband/GPU/CPU Patches By Destiny Creation

Hello Friends,
I am Just Student Of Computer Science Engineering. I Experimented On MMX A110 and Performance Should Up Now.
Here Is My Destiny Creation Patch Is Available For MMX A110 User
(1)Feature :
Sony Bravia Engine
Dual GPU Library Now With Adreno200
Smooth UI Response Tweak
Sony X-Loud By Default Enabled
CPU Performance Tweak
Full Flash LED Light with Better Picture Quality Tweak
How To Flash :
Download Destinyv1.0A110.zip File
Put into External/Internal SD Card
Go To CMW Recovery
Wipe Catch/Delvik Data
Select Intall From SD and Select File And Click YES
Reboot Your System
Done
Undo Patch Is Also Available Now. Do Same Steps For Undo Patch.
(2)
Upgrade To Baseband Version P2
How To Flash :
Download Modem Baseband Zip File
Put into External/Internal SD Card
Go To CMW Recovery
Wipe Catch/Delvik Data
Select Intall From SD and Select File And Click YES
Go To Advance Click On fix Permission
Reboot Your System
Done
May Be Helpful Note :
You can also 60 FPS , after reboot your phone go to camera and record 720p video with 60hz around 60 sec and play repeat few times, FPS will increase. But you must have Youtube application. I tested many times and finally this may be solution, Not got proper solution due to Kernel source is not available.But at every Restart FPS will set to 30 so Do this again when You do Restart.
Declaimer :
I have Tried On My Phone and other 2 Phone But I Will Not Responsible For Any Brick or Any Problem So Flash At Your Own Risk.

will try soon....

Will be testing in a while and post the results. :good:

Except the Bravia Engine, Sony XLoud and GPU Library are they build.prop tweaks?

No,there have some change in lib files and framework files. And also built.prop change for bravia engine and fps setting.
Sent from my Micromax A110 using xda premium

Half the Test Results
I am seeing considerable change in the UI. It is smoother indeed. Though after booting its 30fps but the response is smoother than the time I had 30fps before.
CPU performance may have increased too because I opened up apps in background and there is negligible lag. And AnTuTu gave a score of 3696 on CPU and memory.
The picture is really hard to test and I didn't find much difference in the Flash. I don't think we can change that. It is poor.
The Rest I need time to check since I'm low on battery now. Been flashing since morning
But with most of them working, its a win for me. Great going. :good:

BabuMoshaaye said:
I am seeing considerable change in the UI. It is smoother indeed. Though after booting its 30fps but the response is smoother than the time I had 30fps before.
CPU performance may have increased too because I opened up apps in background and there is negligible lag. And AnTuTu gave a score of 3696 on CPU and memory.
The picture is really hard to test and I didn't find much difference in the Flash. I don't think we can change that. It is poor.
The Rest I need time to check since I'm low on battery now. Been flashing since morning
But with most of them working, its a win for me. Great going. :good:
Click to expand...
Click to collapse
Thanks a lot actually i tried with normal flash light and when you will click for photo it will take more power and more flash than before but as this is my just experiment i am happy that you felt something better in rom.
Thank you.

Just checked. The fps isn't 60. While bench marking it does jump sometimes to about 34-35. The library has indeed helped. I'll do the 60fps again and then benchmark and get back to you!

does this patch needs a Micromax ROM? or will it work with other ROMS?
also, can you upload any UNDO patch also for this....
tia
after reboot your phone go to camera and record 720p video with 60hz around 60 sec and play repeat few times
Click to expand...
Click to collapse
just wanted to clear things..
should we just repeat playing the video, or repeat the whole step of recording and playing?!
--------------------------------------------
well, after installing, i did feel something happened with my screen, the way i flick thru it... i cant say it smooth, its just more responsive.
and my 720p videos have less stutters (compared previously). other call it lag due to 30hz lock.
will test more..
good job!

bluviper said:
does this patch needs a Micromax ROM? or will it work with other ROMS?
also, can you upload any UNDO patch also for this....
tia
just wanted to clear things..
should we just repeat playing the video, or repeat the whole step of recording and playing?!
--------------------------------------------
well, after installing, i did feel something happened with my screen, the way i flick thru it... i cant say it smooth, its just more responsive.
and my 720p videos have less stutters (compared previously). other call it lag due to 30hz lock.
will test more..
good job!
Click to expand...
Click to collapse
First of all Thanks for appreciate and this is Not ROM , this is only patch. And no need to undo but if you will request then i will upload.
And till we can work on kernel its hard to get 60hz rate.
Thank you.

Impressive
@OP please add a Undo patch will behelpful
Helpful Note :
You can also 60 FPS , after reboot your phone go to camera and record 720p video with 60hz around 60 sec and play repeat few times, FPS will increase. But you must have Youtube application. I tested many times and finally this may be solution, Not got proper solution due to Kernel source is not available.But at every Restart FPS will set to 30 so Do this again when You do Restart
Click to expand...
Click to collapse
That makes no sense to me^
We need to merge this in the kernel and not build.prop and stuff
And lack of sources makes this impossible to do :/

Qwerty123 \m/ said:
Impressive
@OP please add a Undo patch will behelpful
That makes no sense to me^
We need to merge this in the kernel and not build.prop and stuff
And lack of sources makes this impossible to do :/
Click to expand...
Click to collapse
I have looked into the 60 FPS thing. We need to add scripts to the kernel through init.d tweaks. Only if the kernel sources were out!

Ok i will undo patch as soon as possible. Thank you and yes only kernel tweak can make refresh rate 60hz lock .. i am continues working and finding to solve this ... hope i will do.
Thank you.

just installed this patch on my mtk 6577 based gionee gn700w and got bootloop
Tent from Sappatalk Via Noir A8

shantam said:
just installed this patch on my mtk 6577 based gionee gn700w and got bootloop
Tent from Sappatalk Via Noir A8
Click to expand...
Click to collapse
This Strictly ONLY for Micromax A110 India User Only

Just flashed the patch, whenever i recieve a call, get a error message "music fx has stopped", plzz solve this problem or get me rid of this
Sent from my Micromax A110 using XDA Premium HD app

rohit297 said:
Just flashed the patch, whenever i recieve a call, get a error message "music fx has stopped", plzz solve this problem or get me rid of this
Sent from my Micromax A110 using XDA Premium HD app
Click to expand...
Click to collapse
Which baseband version you are using? Flash modem patch if you are using p1
Sent from my Micromax A110 using xda premium

jigarpattani said:
Which baseband version you are using? Flash modem patch if you are using p1
Sent from my Micromax A110 using xda premium
Click to expand...
Click to collapse
I am already using p2
Sent from my Micromax A110 using XDA Premium HD app

rohit297 said:
I am already using p2
Sent from my Micromax A110 using XDA Premium HD app
Click to expand...
Click to collapse
Actually this patch is not doing anything with your apps even many person have tested this den after i will check it. Please open music player and check that is music effect working or not??? And have applied any other beat audio or anything else???

Appreciate... any help in custom boot logo...
Hi Jigar,
appreciate your work....
I am desperate to change my boot logo(micromax superfone canvas2 to custom boot logo..)...
I searched rigorously.. but no luck.. could you help me out if you have any solution...?
Thanks..
Sri.

thread priority boost script[beta test]

my new performance tuning script, check it out!!
What's the concept?
-it boosts thread priority per process to gain extra performance.(hopefully)
How do i install?
-download the attachment
-find a way to launch it on any interactive terminal(you're on your own)
-type install
recommended applications:
download busybox from stericsonhere
download smanager here.
How to check if it works?
-type in whatever it says in the installer after you've installed.
-if it responds with error, then you've got problem.
it failed to run, what do i do now?(deeeebuuuuuugiiiiiiing)
-type in 'skeleton(or whatever you renamed it as) --verbose'
this will debug the program and show the result of what is going on.
if necessary, you can also try 'skeleton --bbpass --supass --verbose --renice 19'.
-paste the outcome here. i will help you.
How to run?
-run the program
-read the description.
hidden feature:
-'fork mediaserv 900 0.1 19'
will stop the stutters on audio.
-'randtest'
will cause havok to your device.
details will be updated in a distant future.
feel free to contribute to my code.
sourcecode: https://github.com/lenarox/avcore

pew pew pew

Subscribed (Again)
Inviato dal mio GT-I9000 con CyanAOSP

Me too. So the earlier thread is laid to rest, or will you use both the threads?
Sent from my GT-I9000 using xda app-developers app

ts1506 said:
me too. So the earlier thread is laid to rest, or will you use both the threads?
Sent from my gt-i9000 using xda app-developers app
Click to expand...
Click to collapse
both threads for now...

LENAROX said:
both threads for now...
Click to expand...
Click to collapse
Little Tip: Update your OP.
"Find the flashable zips in thread" > well as this is a new Thread, nobody will ever find + Attachments are flashable lol
Make a Clear Structure, use your reserved second post
Write down the Features, Advantages, and How-to modify it with own values (even if u already did, you can still make clearer )
Make a clear Title:
[SCRIPT][TWEAKS](12/31/2012)
-=Lazerdroid & MP8Engine=- Gaming & UI Boost or whatever
Write down an easy How-To Use and Test for Not-so-Advanced (I won't call them n00bs ^*>) (Update your old tutorial)
Instead "Yo No Press Thanks" (which is actually pretty true) just "Please Press Thanks and rate 5* if you downloaded anything". Be thankfull... Thank You too!"
Don't just write CAPITAL LETTERS & USE ONLY 1-2 "!"
Only Recomnendations, I don't force you to anything.
Great Tweak btw
Thank You,
Jan

For not so Advanced users ( ) just flash the 2 zip files or anything else needs to be done?
Edit
Using i9000 with C-Rom Bean 4.2.1 v2

jader13254 said:
Little Tip: Update your OP.
"Find the flashable zips in thread" > well as this is a new Thread, nobody will ever find + Attachments are flashable lol
Make a Clear Structure, use your reserved second post
Write down the Features, Advantages, and How-to modify it with own values (even if u already did, you can still make clearer )
Make a clear Title:
[SCRIPT][TWEAKS](12/31/2012)
-=Lazerdroid & MP8Engine=- Gaming & UI Boost or whatever
Write down an easy How-To Use and Test for Not-so-Advanced (I won't call them n00bs ^*>) (Update your old tutorial)
Instead "Yo No Press Thanks" (which is actually pretty true) just "Please Press Thanks and rate 5* if you downloaded anything". Be thankfull... Thank You too!"
Don't just write CAPITAL LETTERS & USE ONLY 1-2 "!"
Only Recomnendations, I don't force you to anything.
Nice Tweak btw
You can take a look at my threads too :silly:
Thank You,
Jan
Click to expand...
Click to collapse
Lol thanx for the recommendations XD
Please, just call me 'Lag Doctor'.

Indian Devil said:
For not so Advanced users ( ) just flash the 2 zip files or anything else needs to be done?
Edit
Using i9000 with C-Rom Bean 4.2.1 v2
Click to expand...
Click to collapse
You need to flash only the first file (LazerDroid + MPEngine), the second file is only the MPEngine
Inviato dal mio GT-I9000 con CyanAOSP

Subscribed!!!
Hope to see more of your LazerDroid!!!
Btw, HAPPY NEW YEAR to all XDA members!!!!
Sent from my GT-I9001 using xda premium

Sound great!
Please make the instruction more clearly if you have time
EDIT: I'm stuck on boot logo after installing Lazerdroid&Engine package. Doesnt matter if via CWM or manually. I'm on CM9.1

cnkhanh said:
Sound great!
Please make the instruction more clearly if you have time
EDIT: I'm stuck on boot logo after installing Lazerdroid&Engine package. Doesnt matter if via CWM or manually. I'm on CM9.1
Click to expand...
Click to collapse
You can extract and copy and paste manually

Famzz said:
You can extract and copy and paste manually
Click to expand...
Click to collapse
I tried it that way, still not boot
Sent from my Xperia Sola using xda app-developers app

cnkhanh said:
I tried it that way, still not boot
Sent from my Xperia Sola using xda app-developers app
Click to expand...
Click to collapse
I will upload a fix soon
Please, just call me 'Lag Doctor'.

Flashed the zip. All is well.
antutu score (engine8 only): 3303
antutu score (lazeroid 2.7 + engine8): 4480 (sd card write is slow as hell due to my movinand) database IO = 360 (has been better on other versions off lazeroid/vm lagtuner.
my setup: SGS 1 with slow nand, liveoc 120, ondemand, deep idle on, no big mem, 512 mb sd card read ahead, SAI on, BLN on
Still a GREAT tweak/script for my SGS.
Thnx LENAROX !
PS: [Question] What's your opinion on "SD card read ahead in semaphore" ? Mine is 512kb because i read that that more causes more lag...

pbecks1963 said:
Flashed the zip. All is well.
antutu score (engine8 only): 3303
antutu score (lazeroid 2.7 + engine8): 4480 (sd card write is slow as hell due to my movinand) database IO = 360 (has been better on other versions off lazeroid/vm lagtuner.
my setup: SGS 1 with slow nand, liveoc 120, ondemand, deep idle on, no big mem, 512 mb sd card read ahead, SAI on, BLN on
Still a GREAT tweak/script for my SGS.
Thnx LENAROX !
PS: [Question] What's your opinion on "SD card read ahead in semaphore" ? Mine is 512kb because i read that that more causes more lag...
Click to expand...
Click to collapse
Hmm.. Ill take a look about the sdcard read ahead tweaks.
If you want to disable that read ahead tweak(lazerdroid script)
you should erase all the 'tune your settings here' lines. It will permanently disable every sdcard tweak the script has.
btw, my antutu score is much worse than yours
but who cares, the games are smoooooth
Please, just call me 'Lag Doctor'.

I was wondering - do these tweaks work and have any effect on other phones? For example sgs2.

archzz said:
I was wondering - do these tweaks work and have any effect on other phones? For example sgs2.
Click to expand...
Click to collapse
For all Android phones\tablets\PCs with Linux

MPEngine9 development has been finished. The current changes from the previous version are:
-removed minfree calculator(they dont work in some roms) replaced with MFKx2 multiplier.
-changed all the tweaks to non specified applet directory(includes lazerdroid)(a new fix for everything)
-alot stronger, best cache cleaner.
-theres more but i cant remember...
It still doesnt change the fact that i will release them in sunday.(if lucky i might be able to upload sooner than that)
thank you
Please, just call me 'Lag Doctor'.

Need help. When i install CWM_LazerDroid_2_7_MPEngine8_package.zip in recovery mode and i go then to system/etc/init.d/____ i dont have any new file.
There it must be system/etc/init.d/2LazerDroid2_7. Why i dont have this file?

(GUIDE)MAKE YOUR Phone Faster

HELLO EVERYONE I THINK U WILL LOVE AFTER WATCHING THIS...
I KNOW THAT EVERYBODY USING ANDROID SMARTFONE ARE SUFFERING FROM lagging WHILE PLAYING...
1.TEMPLE RUN
2.TEMPLE RUN 2
3.SUBWAY SURFER
4.NSF MOST WANTED
5.FL COMMANDER
6.HOMERUN BATTLE 2
7. VIDEOS 720P
8. AND ALSO WITH SYSTEM MULTI TASKING
IN THIS POST I WILL SHOW HOW TO MAKE ANDROID LAG FREE WITH THE HELP OF SOME APPS
PLZ NOTE THAT ALL APPS CREDITS GO TO THEIR DEELOPERS....
I AM JUST SHARING THAT AND MAKE SOME TEAKS THAT I MADE
ALL U NEED
1. ANY ANDROID PHONE (ACE PLUS MOST)
2. FREE TIME ABT 30 MIN
3. SOME INTERNET
4. KNOWLEDGE
5. AND MOST IMP BRAIN THAT I KNOW U ALL HAVE..
SO LETS START....

1. INSTALL SEEDER
SEEDER IS A APP THROUGH WHICH U CAN GENERATE YOUR ANDROID ENTROPY...
PLZ REFER ORIGINAL POST
http://forum.xda-developers.com/showthread.php?t=1987032
BUT IN THIS AFTER FOLLOW THIS STEPS...
1. ENABLE SEEDER LEG REDUCTION
2. ENABLE I/O QUEQE
3. START AUTOMATICALLY ON BOOT
4. AND SET RNG SERVICE PERFORMANCE PROFILE TO AGGRESSIVE...
OHHHH...
YOU HAVE DONE IT..
2. INSTALL ENTROPY FIXER
PLAY STORE LINK...https://play.google.com/store/apps/details?id=com.zdvdev.sef&hl=en
THEN SET CURRENT THRESHOLD TO 1024
AND THEN IT IS OK...
3. INSTALL CACHE BOOSTER
PLAY STORE LINK https://play.google.com/store/apps/details?id=com.Super.sdbooster.pro
AND SET THE CACHE TO 8196 FOR 16 GB MEMORY CARD.. IT IS VARIOUS FOR ALL SIZE THAT U WILL FIND IN HELP..
4. INSTALL BLADE BUDDY
PLAY STORE LINK https://play.google.com/store/apps/details?id=com.droidgram.bladebuddy&hl=en
1. INSTALL IT & OPEN IT
2. DEVICE SETTING < ADVANCE SETTING < DEBUG.SF.HW ENABLE IT
+ USE ROOT CLEANER ONCE IN WEEK ITS A PAID APP THAT YOU WILL PERCHASE FROM PLAY STORE..
+ SET CPU TO PERFORMANCE IT WILL USE MORE BATTERY THEN GO TO ON DEMAND
AND U HAV DONE IT...
JUST DONT USE ANY MEMORY CLEANER OT BATTERY USERS... JUST FOLLOW THIS AND U WILL HAV LAG FREE SPEEDY I PHONE LIKE ACE PLUS...
HIT THANKS IF I HELP YOU...:good:
IT WILL WORK ON ANY DEVICE BUT FOR GB ITS GREAT...
HOPE YOU LIKE THIS...
CREDITS
masterserajr

its really working or not? any 1 cnfrm plz

well, i think installing these apps will low the ram resulting in lagging of the games

saadtariq73 said:
well, i think installing these apps will low the ram resulting in lagging of the games
Click to expand...
Click to collapse
Oh really have you tried it.
Sent from my GT-S5360 using Tapatalk 2

san122 said:
Oh really have you tried it.
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
havent tried
i was just wondering
will try on JB 4.2.2

san122 said:
HELLO EVERYONE I THINK U WILL LOVE AFTER WATCHING THIS...
I KNOW THAT EVERYBODY USING ANDROID SMARTFONE ARE SUFFERING FROM lagging WHILE PLAYING...
1.TEMPLE RUN
2.TEMPLE RUN 2
3.SUBWAY SURFER
4.NSF MOST WANTED
5.FL COMMANDER
6.HOMERUN BATTLE 2
7. VIDEOS 720P
8. AND ALSO WITH SYSTEM MULTI TASKING
IN THIS POST I WILL SHOW HOW TO MAKE ANDROID LAG FREE WITH THE HELP OF SOME APPS
PLZ NOTE THAT ALL APPS CREDITS GO TO THEIR DEELOPERS....
I AM JUST SHARING THAT AND MAKE SOME TEAKS THAT I MADE
ALL U NEED
1. ANY ANDROID PHONE (ACE PLUS MOST)
2. FREE TIME ABT 30 MIN
3. SOME INTERNET
4. KNOWLEDGE
5. AND MOST IMP BRAIN THAT I KNOW U ALL HAVE..
SO LETS START....

[UPDATE] Universal MTK performance package

ALL MTK USERS...
You Must be suffering from-
Laggy UI,
Not much free RAM,
Slow net speed... and...Blah.. Blah..Blah.
Here's the solution...
I have a flashable performance upgrade package to boost your beloved android's overall performance:laugh:
What it will do?
Featuring...
BRAVIA engine 3 for superb screen quality... :laugh:
Lots of init.d tweaks to boost performance at every boot...
Some useful build.prop tweaks
Net speed increment tweaks.
How to install ? 
1.Boot into recovery
2.Just flash the zip
3.Do 'Fix Permissions' in advanced > fix permissions (If it takes too much time for your device, please don't do)
4.Reboot
Now comes real part, :fingers-crossed:
After reboot, open 'Terminal Emulator' and type 'su' and press enter to run scrips as root...
Type 'mtkmod'and press enter to run the script...
Wait untill the script does it work and phone reboots..
I've fixed the issue. Download the update please
Now you're done!
If you don't have init.d support on your kernel, visit here
Downloads:
Zip is attached to the post
Tested on ICS and JB. May not work on Gingerbread.
Credits:Me 
My thanks to-
Androite
TheBlackwolf
YOU ARE FREE TO ADD THIS IN YOUR ROM...BUT WITH PROPER CREDITS
Please hit thanks if I helped you...
I'm not responsible for anything that happens to your device. Its always better to have a nandroid backup in case.

:good: nyc work! hoping to try it

Keep it up man... will try it...
Sent from my GT-I9500 using XDA Premium 4 mobile app

im on stock rooted rom, my phone doesnt have init.d support, what do i do?? my phone is canvas 4

does it affect much the battery consumption? any removal patch just in case it doesn't work properly? thank you very much

shashanksetty said:
:good: nyc work! hoping to try it
Click to expand...
Click to collapse
Thank you bro.
Update will release soon

yesiamfrozen said:
im on stock rooted rom, my phone doesnt have init.d support, what do i do?? my phone is canvas 4
Click to expand...
Click to collapse
Yup I got you
Do following:
1. Go on /system/etc folder.
2. Find 'install-recovery.sh'. (if it's not there, make it) :silly:
3. Open it with a good text editor.
4. Type following lines at the end of the all stuff present in it (if any).
HTML:
#!/system/bin/sh
#init.d support
busybox run-parts /system/etc/init.d
5. You'done . If you have any problem, pm me

sombritagl said:
does it affect much the battery consumption? any removal patch just in case it doesn't work properly? thank you very much
Click to expand...
Click to collapse
I don't think init.d scripts and other stuff will consume battery In fact there are scripts added to enhance battery life. And yes I'm working on an update and uninstaller. Will come soon. After all, we also have life too

@noobpremium
Whoa Bro! Scripts are cool
Tried it enhanced my device.
Waiting for your update
Keep it up!
Sent from my XOLO A700 KK Edition using Tapatalk Premium

Thanks for the reply ANDY
Thanks for support. :angel:

noobpremium said:
I don't think init.d scripts and other stuff will consume battery In fact there are scripts added to enhance battery life. And yes I'm working on an update and uninstaller. Will come soon. After all, we also have life too
Click to expand...
Click to collapse
Don't worry, there's no hurry. Thanks for your time and for sharing. Keep up the good work!
Enviado desde mi UMI X1

noobpremium said:
ALL MTK USERS...
You Must be suffering from-
Laggy UI,
Not much free RAM,
Slow net speed... and...Blah.. Blah..Blah.
Here's the solution...
I have a flashable performance upgrade package to bosst your beloved android's overall performance :laugh:
What it will do?
Featuring...
BRAVIA engine 3 for superb screen quality... :laugh:
Lots of init.d tweaks to boost performance at every boot...
Some useful build.prop tweaks
Net speed increment tweaks.
How to install ? 
1.Boot into recovery
2.Just flash the zip
3.Do 'Fix Permissions' in advanced > fix permissions (If it takes too much time for your device, please don't do)
4.Reboot
Now comes real part, :fingers-crossed:
After reboot, open 'Terminal Emulator' and type 'su' and press enter to run scrips as root...
Type 'mtkmod'and press enter to run the script...
Wait untill the script does it work and phone reboots..
I've fixed the issue. Download the update please
Now you're done!

Downloads:
Zip is attached to the post
Tested on ICS and JB. May not work on Gingerbread.
Credits: Me 
My thanks to-
Androite
TheBlackwolf
YOU ARE FREE TO ADD THIS IN YOUR ROM...BUT WITH PROPER CREDITS
Please hit thanks if I helped you...
I'm not responsible for anything that happens to your device. Its always better to have a nandroid backup in case.
Click to expand...
Click to collapse
nice work dude...

Nice work matekeep rocking on
Hit Thanks Button IF I Helped.
Sent from heaven

lavadepa said:
Nice work matekeep rocking on
Hit Thanks Button IF I Helped.
Sent from heaven
Click to expand...
Click to collapse
Thanks bro...:highfive::fingers-crossed:
I'll contact you if help is needed.

look like a failure in my phone
What should i do? I'm using lenovo a850.

The content inside the zip seems to be good.
it contains all cpugputuner, ram booster, zram,loopy smoothness etc etc..........wow
but dont you think that these will conflict with each other or any other scripts that are there in custom roms?
BUT STILL I WILL TRY IT FOR SURE. for now i am testing a new ROM, will try it out after that.

Arexero said:
What should i do? I'm using lenovo a850.
Click to expand...
Click to collapse
That ss says ''reboot not permitted'', which means you didn't get superuser(root) permissions typing 'SU'.
Type su before doing anything.

[email protected] said:
The content inside the zip seems to be good.
it contains all cpugputuner, ram booster, zram,loopy smoothness etc etc..........wow
but dont you think that these will conflict with each other or any other scripts that are there in custom roms?
BUT STILL I WILL TRY IT FOR SURE. for now i am testing a new ROM, will try it out after that.
Click to expand...
Click to collapse
Actually I agree with you. But I've collected those init scripts from xda and they are the real deal. I didn't find anything more than those. I think this is the universal collection of init scripts available on xda...

Sorry,How I Uninstall this mod?

Since you decided to steal other peoples hard work and try to pass it off as your own...
I am closing this thread

[GUIDE]Tricks & tweaks to improve looks and speed of your Android

Hi guys, today I'm posting some great tips tweaks and tricks for ROOTED Android phone which I've tested on Karbonn A1 plus. These should work in almost any phone as they are mostly not device specific. And I've tried them all on my device which means there are next to no chances of damaging your device.
This guide includes the following :-
1.Change the look and feel of your device (Includes CWM method and the new Lucky Patcher method)
2.Run temple run and such games on Karbonn A1+ (and other low-end Chinese phones) and increase overall performance by increasing the RAM.
3.Change the boot animation of your device.
4.Change the fonts of your device.
5.Supercharge the phone with some great tweaks (credits =zeppelinrox=)
6.Some handy tweaks using xposed modules to further customise your phone and improve performance suit your needs.
BEFORE I POST THE TRICKS I'LL HAVE TO WARN YOU, AS A FORMALITY THAT ANY DAMAGE CAUSED TO YOUR DEVICE IN ANY WAY DIRECT OR INDIRECT DUE TO THIS POST SHALL BE SOLELY YOUR RESPONSIBILITY.
READ ANY FURTHER ONLY IF YOU AGREE TO THIS.
Okay, so let's start !!!
1.Changing the status bar of your phone Go here
2. Improve performance
Use Roehsoft Ram Expander (download from attachments) to create a swapfile and use it to increase your phone's RAM.This will provide you with some extra RAM and you will be able to run games like
Temple Run Oz,Temple Run Brave,Temple Run 2,NFS Shift and several others.
I have tested and found all these games running on my phone although sometimes there was a bit of a lag in temple run , but I guess that's acceptable
You'll see 2 empty fields after u launch the app and select the language. The Size field determines the size of the file that Ram Expander will create to provide you with extra RAM. Simply put this means
that the number u type in here will be the no. of extra MBs of RAM you'll get. Remember though that I won't recommend a value bigger than 1024 as almost all apps will do fine with this much RAM.
Also the better your SD Card is the better your performance will be. A class 4 Sd card is the bare minimum and class 6 or higher is highly recommended.
Experiment with ur own values in the swap file size and Swappiness fields.
However these are a few settings that work best for me.
Swap file size = 820 (which gives a total of 204 820 = 1024 MB RAM)
Swappiness = 85
Auto run enabled.
I'd also recommend that you used the CPU control option in rom toolbox pro to underclock the processor to save battery.
Another recommended app is Titanium backup which helps you efficiently and automatically backup the data and the apk of your apps along with allowing you to uninstall bloatware.
3.Changing the boot animation of your phone.
First understand what a boot animation is - It is the animation which is displayed after the company logo in our case after the Karbonn smart logo.
To change it first download ROM Toolbox Pro from the play store. I would recommend that you bought the app as the developer well deserves it.
Now go to the interface tab and click on boot animations . Press the menu key and click install location.
Change it to /system/etc/oem/ and put the filename as bootanimation.zip.
Now download any of the several boot animations from within rom toolbox pro.After download they'll be saved to /mnt/sdcard/romtoolbox/bootanimations/here.
To install one of them just go to the local tab in boot animations, browse to the above folder touch the desired boot animation and click install.
On the next reboot you'll see that boot animation after the karbonn smart logo.
4. Changing the fonts
Bored with the default fonts huh ???
Give this a spin ...
Launch rom toolbox pro and go to the fonts installer option in the interface tab. Click on this option and after a while you'll see a list of fonts which u can preview and install at choice.
You can also search and download different fonts from the internet and browse to them in the local tab and select the install option.
After you do this you'll be asked to reboot and voila !! you have changed your device's fonts.
5.Supercharge your phone and squeeze every bit of performance out of it
I want to make it clear that this is not my creation and all the credit goes to =zeppelinrox=.
Download SManager from the attachments.
Go to this thread : v6 supercharger and download the Supercharger Starter kit (you'll need it) also download the latest v6 Supercharger BlackDog update (NOT V8 supercharger).
Extract the Supercharger Starter kit zip and run Startmeup.sh with SU permissions (touch the script file click on the second (pirate like) icon and click run).
This will install all the necessary components needed to run the V6 supercharger. This will also install zipalign and sqlite binaries which are great help too.
Follow the instructions given on the forum and you'll do just fine.
You can also try this 3G turbocharger script again by =zeppelinrox= although I didn't notice much of a difference but the results may vary from place to place and from carrier to carrier so give it a try too.
6.Some handy tweaks using xposed modules
1.Download the xposed framework installer for Gingerbread from the attachments.
2.Go to the Framework section and click Install/Update.The phone will reboot.
3.After reboot go to the Downloads section and download the modules you want (decide by reading the give description). Install the modules and then go to the Modules section and check mark all the modules.Reboot.
4.Now u can launch these modules from the app drawer and tweak the way they behave and work by changing the settings.
Here I'm posting some links to pages with great kernel tweaks and a page which contains a really nice booster engine. Enjoy .....
Info on kernel and the CPU (includes tweaks as well)
Spl engine (to boost performance)
Congratulations !!!! you've just tweaked your phone to give you all the performance and beauty the hardware below that screen can afford to.
If you have a problem, post it here and I'll come back to you as soon as I can.
Also if you want to post the information in this thread anywhere else you are free to do it. Just make sure that you give me due credit and provide a link directing to this thread.
Downloads :-
Rom Toolbox Pro :
Download link
Titanium Backup Pro :
Download link
DON'T FORGET TO HIT THANKS.

Here are some mods and scripts that I found working well and which serve some commonly needed purposes (speeding the phone) . None of these have been created by me but by the people on xda itself. My sole aim here is to let more and more people know about these works.
1 . The Pure Performances Mod by Jeeko and team.
Find it here .
2. Universal init.d installer by Ryuinferno to get init.d support on phones where its not present (proves really useful)
Get it here
3. The Great Dash-M by Mya SeR - people running ics and above, keep in mind that this mod REPLACES the build.prop by Dash.prop so your build.prop customizations won't work.
Get it
More to come .....

Reserved

Atishay Jain said:
Hi guys, today I'm posting some great tips tweaks and tricks for ROOTED Android phone which I've tested on Karbonn A1 plus. These should work in almost any phone as they are mostly not device specific. And I've tried them all on my device which means there are next to no chances of damaging your device.
This guide includes the following :-
1.Change the look and feel of your device (Includes CWM method and the new Lucky Patcher method)
2.Run temple run and such games on Karbonn A1+ (and other low-end Chinese phones) and increase overall performance by increasing the RAM.
3.Change the boot animation of your device.
4.Change the fonts of your device.
5.Supercharge the phone with some great tweaks (credits =zeppelinrox=)
6.Some handy tweaks using xposed modules to further customise your phone and improve performance suit your needs.
BEFORE I POST THE TRICKS I'LL HAVE TO WARN YOU, AS A FORMALITY THAT ANY DAMAGE CAUSED TO YOUR DEVICE IN ANY WAY DIRECT OR INDIRECT DUE TO THIS POST SHALL BE SOLELY YOUR RESPONSIBILITY.
READ ANY FURTHER ONLY IF YOU AGREE TO THIS.
Okay, so let's start !!!
1.Changing the status bar of your phone Go here
2. Improve performance
Use Roehsoft Ram Expander (download from attachments) to create a swapfile and use it to increase your phone's RAM.This will provide you with some extra RAM and you will be able to run games like
Temple Run Oz,Temple Run Brave,Temple Run 2,NFS Shift and several others.
I have tested and found all these games running on my phone although sometimes there was a bit of a lag in temple run , but I guess that's acceptable
You'll see 2 empty fields after u launch the app and select the language. The Size field determines the size of the file that Ram Expander will create to provide you with extra RAM. Simply put this means
that the number u type in here will be the no. of extra MBs of RAM you'll get. Remember though that I won't recommend a value bigger than 1024 as almost all apps will do fine with this much RAM.
Also the better your SD Card is the better your performance will be. A class 4 Sd card is the bare minimum and class 6 or higher is highly recommended.
Experiment with ur own values in the swap file size and Swappiness fields.
However these are a few settings that work best for me.
Swap file size = 820 (which gives a total of 204 820 = 1024 MB RAM)
Swappiness = 85
Auto run enabled.
I'd also recommend that you used the CPU control option in rom toolbox pro to underclock the processor to save battery.
Another recommended app is Titanium backup which helps you efficiently and automatically backup the data and the apk of your apps along with allowing you to uninstall bloatware.
3.Changing the boot animation of your phone.
First understand what a boot animation is - It is the animation which is displayed after the company logo in our case after the Karbonn smart logo.
To change it first download ROM Toolbox Pro from the play store. I would recommend that you bought the app as the developer well deserves it.
Now go to the interface tab and click on boot animations . Press the menu key and click install location.
Change it to /system/etc/oem/ and put the filename as bootanimation.zip.
Now download any of the several boot animations from within rom toolbox pro.After download they'll be saved to /mnt/sdcard/romtoolbox/bootanimations/here.
To install one of them just go to the local tab in boot animations, browse to the above folder touch the desired boot animation and click install.
On the next reboot you'll see that boot animation after the karbonn smart logo.
4. Changing the fonts
Bored with the default fonts huh ???
Give this a spin ...
Launch rom toolbox pro and go to the fonts installer option in the interface tab. Click on this option and after a while you'll see a list of fonts which u can preview and install at choice.
You can also search and download different fonts from the internet and browse to them in the local tab and select the install option.
After you do this you'll be asked to reboot and voila !! you have changed your device's fonts.
5.Supercharge your phone and squeeze every bit of performance out of it
I want to make it clear that this is not my creation and all the credit goes to =zeppelinrox=.
Download SManager from the attachments.
Go to this thread : v6 supercharger and download the Supercharger Starter kit (you'll need it) also download the latest v6 Supercharger BlackDog update (NOT V8 supercharger).
Extract the Supercharger Starter kit zip and run Startmeup.sh with SU permissions (touch the script file click on the second (pirate like) icon and click run).
This will install all the necessary components needed to run the V6 supercharger. This will also install zipalign and sqlite binaries which are great help too.
Follow the instructions given on the forum and you'll do just fine.
You can also try this 3G turbocharger script again by =zeppelinrox= although I didn't notice much of a difference but the results may vary from place to place and from carrier to carrier so give it a try too.
6.Some handy tweaks using xposed modules
1.Download the xposed framework installer for Gingerbread from the attachments.
2.Go to the Framework section and click Install/Update.The phone will reboot.
3.After reboot go to the Downloads section and download the modules you want (decide by reading the give description). Install the modules and then go to the Modules section and check mark all the modules.Reboot.
4.Now u can launch these modules from the app drawer and tweak the way they behave and work by changing the settings.
Here I'm posting some links to pages with great kernel tweaks and a page which contains a really nice booster engine. Enjoy .....
Info on kernel and the CPU (includes tweaks as well)
Spl engine (to boost performance)
Congratulations !!!! you've just tweaked your phone to give you all the performance and beauty the hardware below that screen can afford to.
If you have a problem, post it here and I'll come back to you as soon as I can.
Also if you want to post the information in this thread anywhere else you are free to do it. Just make sure that you give me due credit and provide a link directing to this thread.
Downloads :-
Rom Toolbox Pro :
Download link
Titanium Backup Pro :
Download link
DON'T FORGET TO HIT THANKS.
Click to expand...
Click to collapse
Great

Aleemk9 said:
Great
Click to expand...
Click to collapse
Thanks for the comment. Just to let u know, I tried ur status bar and it worked for me when I used this method.

Hi everybody,
Here is a link to the thread http://forum.xda-developers.com/showthread.php?t=2629167 which has all the different status bars, ROMS and other handy and useful mods for Karbonn A1 . Be sure that all the status bars mentioned in this thread are safe as I've tried them all.
Enjoy .....

Atishay Jain said:
Thanks for the comment. Just to let u know, I tried ur status bar and it worked for me when I used this method.
Click to expand...
Click to collapse
ya.. I too used your method to install moded apk
---------- Post added at 01:15 PM ---------- Previous post was at 01:12 PM ----------
Atishay Jain said:
Thanks for the comment. Just to let u know, I tried ur status bar and it worked for me when I used this method.
Click to expand...
Click to collapse
bro I need your help please give me ur fb I'd or join Karbonn A1+ fb group..

Can be applied THL T11 octa core Android mobile phone?

Aleemk9 said:
ya.. I too used your method to install moded apk
---------- Post added at 01:15 PM ---------- Previous post was at 01:12 PM ----------
bro I need your help please give me ur fb I'd or join Karbonn A1+ fb group..
Click to expand...
Click to collapse
I don't have a Facebook id. Tell me what happened here as it may help several others. Also I check this thread at least twice daily so this would be a much better option.

Krystyna said:
Can be applied THL T11 octa core Android mobile phone?
Click to expand...
Click to collapse
These tweaks can be used on any phone as they are not related to a particular kernel or os version. You will be able to safely try these with the least chances of damaging your phone. Enjoy ........

Good work, but there is 1 thing amiss here. The kernel. These tweaks may bring out some performance but not as much as a custom kernel. Tweaking/flashing a custom kernel is like tweaking a car engine, its where you can mostly decide how your phone will act. Just pointing that out, so people don't ignore the facts.

pitastrudl said:
Good work, but there is 1 thing amiss here. The kernel. These tweaks may bring out some performance but not as much as a custom kernel. Tweaking/flashing a custom kernel is like tweaking a car engine, its where you can mostly decide how your phone will act. Just pointing that out, so people don't ignore the facts.
Click to expand...
Click to collapse
Thanks for the suggestion. I too thought about including some kernel tweaks and even some relating to the CPU but I felt that there already are several guides that are far better than what I could write (I've learnt all I know about kernel tweaks from them) already present on xda so it'd be just repitition writing them again. Also I didn't find a very large difference being made by the tweaks (except a few). I originally created this thread to introduce a new method (the lucky patcher method) to change status bars but included some basis tweaks to make it a bit more helpful for newcomers. Anyways thanks for the suggestion. Maybe if some more people mention that they'd like to see some io scheduler and kernel tweaks in this thread I'll include some.

Atishay Jain said:
I don't have a Facebook id. Tell me what happened here as it may help several others. Also I check this thread at least twice daily so this would be a much better option.
Click to expand...
Click to collapse
wich custom rom you using in sw/v 2.1.3 ??

Aleemk9 said:
wich custom rom you using in sw/v 2.1.3 ??
Click to expand...
Click to collapse
I'm running stock. I tried xperia rom, green wrapper, vaibhavs rom, deadspace, destro A1, bluebean, revnart smoke. , ultra v1, (u see I've tried all the roms available for karbonn A1 but NONE worked) I even tried backing up and restoring but that didn't help either. I also tried restoring chetans backup which didn't help me either. I think that the version of recovery is not for s/w 2.1.3. Whenever flashing failed o had to take the phone to the service center. Any help or suggestion ?
By the way I remember u said you're in a problem ? What's that and how can I help you?

Since this is a general thread for tricks and tweaks. Please talk about kernels and cpu or you can attach the links. So we can get all in one..
--Thanks for these useful information....
Sent from Galaxy SL i9003 running Ehndroix V 14.4.30 based on CyanogenMod 11

abmhr99 said:
Since this is a general thread for tricks and tweaks. Please talk about kernels and cpu or you can attach the links. So we can get all in one..
--Thanks for these useful information....
Sent from Galaxy SL i9003 running Ehndroix V 14.4.30 based on CyanogenMod 11
Click to expand...
Click to collapse
I don't know why but I'm unable to type more than 3 new characters in the first post. I'll try to find a reason for this but if I don't get one I'll post the new tricks and extra info (regarding kernel tweaks) in a new post. Thanks for the suggestions.

Hi everybody. I have posted 2 new links as many people suggested that I include some kernel and CPU tweaks too. I couldn't type what I wanted in the first post due to some restrictions by xda so I've just added the links. Hope that helps. Check them out in the first post and Enjoy ...

Atishay Jain said:
I'm running stock. I tried xperia rom, green wrapper, vaibhavs rom, deadspace, destro A1, bluebean, revnart smoke. , ultra v1, (u see I've tried all the roms available for karbonn A1 but NONE worked) I even tried backing up and restoring but that didn't help either. I also tried restoring chetans backup which didn't help me either. I think that the version of recovery is not for s/w 2.1.3. Whenever flashing failed o had to take the phone to the service center. Any help or suggestion ?
By the way I remember u said you're in a problem ? What's that and how can I help you?
Click to expand...
Click to collapse
thanks my problem fixed by mistake .....
and your problem its not a recovery problem
its problem in boot image
for fixing this problem you need flash stock sw/v 2.0.2 rom using pc
sorry for late replay and my bad English

Aleemk9 said:
thanks my problem fixed by mistake .....
and your problem its not a recovery problem
its problem in boot image
for fixing this problem you need flash stock sw/v 2.0.2 rom using pc
sorry for late replay and my bad English
Click to expand...
Click to collapse
Glad that you're out of trouble. I've sent you anothet pm to clarify a few things. Hope you'll answer. Thanks.

Atishay Jain said:
Glad that you're out of trouble. I've sent you anothet pm to clarify a few things. Hope you'll answer. Thanks.
Click to expand...
Click to collapse
Check your PM

Database Info

welcome