Hello. I have a problem. At first I unlocked bootloader, rooted, put custom recovery, all the things, than I installed faux's hybrid first from fastboot ,but wifi would automaticaly turn off if i try to turn it on, so i flashed it with cwm as was one of the replies with the same problem. After that wifi was working properly. Than i installed xposed framework and uninstalled it uncorrectly and whatnot tried to change to art which turned to be a mistake. Basicaly my phone was really messed up, cuz i played a little too much with it. So i completely wiped it and went by the guide on how to restore stock firmware. I now have us retail version, but from the startup (with the original kernel) the wifi wasn't working. So i tried to install the kernel via cwm, but that didn't fix it. I don't know what's the problem. I also tried to copy /system/lib/modules files for hybrid kernel but nothing changes.. Maybe i could try with stock us retail 4.3 xt1032 files if anyone has them? I don't know im still a noob so if anyone of you has a solution or someething it would be kindly appreciated.
Thanks
Related
Hey guys,
I recently rooted and installed CM7 on my HTC Incredible S. After the mod worked fine, I did not have any phone service. I attempted to flash a new radio, but couldn't figure out how to do it (I think it wouldn't work because my phone is S-ON). Now when I tried to restore my phone from the nandroid back up in Clockworkmod, when the phone restarts, it gets stuck at the splash screen.
On my memory card, the only extra additions are the CM7 mod, the google apps update and a file called PG32IMG.zip. I am able to access the bootloader screen fine.
If anyone could provide any assistance, that would be awesome. I really need to use my phone! Thanks guys. I searched to find any fixes, but couldn't find any.
EDIT: Okay, I solved this problem by manually flashing the recovery image using fastboot. However, I still have no service. Has anyone had this problem before?
So I have a little bit of a strange issue.
I had flashed the AOKP Milestone 5 on my TF, and although I managed to fix the CWM bootloop, it doesn't appear I'm able to install any other ROM.
Since I've flashed it, any other ROM I attempt to flash either fails to complete it's first boot (watched a few different ones try for hours yesterday) or wifi will not turn on. The wifi issue is also present in my backup from stock.
Perhaps for the ROMs that are booting for me there is a different kernel I may have better luck with? Thoughts, anyone?
frankxanders said:
So I have a little bit of a strange issue.
I had flashed the AOKP Milestone 5 on my TF, and although I managed to fix the CWM bootloop, it doesn't appear I'm able to install any other ROM.
Since I've flashed it, any other ROM I attempt to flash either fails to complete it's first boot (watched a few different ones try for hours yesterday) or wifi will not turn on. The wifi issue is also present in my backup from stock.
Perhaps for the ROMs that are booting for me there is a different kernel I may have better luck with? Thoughts, anyone?
Click to expand...
Click to collapse
What recovery are you using? might pay to try another (Recommended: http://forum.xda-developers.com/showthread.php?t=1759452)
You may want to obtain a kernel compatible with the ROM you want to try and flash both the ROM and kernel at the same time. The wrong kernel could definitely cause both the booting problems and the wifi not turning on.
I think about a kernel problem too, go to your ROM thread and you'll see the best kernel to flash with it...
So i was using elixir for a while and it was getting buggy and slow and i haven't seen that much support from the developer so i decided to switch to xTraSmooth
Upon loading the rom up i decided i wanted a fresh slate and none off the apps or app data from previous roms
So i (Dont put the rom.zip back onto the phone) and wipe everything. After that i had no usb access. So i fiddled around with uninstalling and reinstalling the drivers until sideload would work
i sideloaded the rom and booted into it. First red flag was that i had no sim card. After i went through the welcome screen i noticed i had no soft keys, no top bar, no simcard, no wifi, no nothing.
I looked into the settings>about phone and noticed i have no baseband version so i think there is no radio?
EDIT: I had usb access after so i loaded the rom normally and flashed the zip. Same result.
If anyone could tell me whats wrong and help me get a clean xTraSmooth version on my phone that would be very much appreciated
Thank you for the help!
No? No one knows anything?
Try to flash again and also flash the radio. ZIP is with the folders of the developer of this rom.. That might help.
Delux20 said:
So i was using elixir for a while and it was getting buggy and slow and i haven't seen that much support from the developer so i decided to switch to xTraSmooth
Upon loading the rom up i decided i wanted a fresh slate and none off the apps or app data from previous roms
So i (Dont put the rom.zip back onto the phone) and wipe everything. After that i had no usb access. So i fiddled around with uninstalling and reinstalling the drivers until sideload would work
i sideloaded the rom and booted into it. First red flag was that i had no sim card. After i went through the welcome screen i noticed i had no soft keys, no top bar, no simcard, no wifi, no nothing.
I looked into the settings>about phone and noticed i have no baseband version so i think there is no radio?
EDIT: I had usb access after so i loaded the rom normally and flashed the zip. Same result.
If anyone could tell me whats wrong and help me get a clean xTraSmooth version on my phone that would be very much appreciated
Thank you for the help!
Click to expand...
Click to collapse
Did u ever get it fixed I just got the same problem
So ever since yesterday I've been able to use WiFi. I was chromecasting something and while it was casting my phone went through a reboot, thought nothing of it since its happened lately. Well i think it did it a few times. Well I check my phone after my show is over and my WiFi is off., and I can't turn it on. I rooted my phone last night since it was unlocked already from when I had it rooted before. It's on Android 6.0 right now. I was just wondering if anyone had any ideas of how to fix it. I was getting a logcat error in reference to the wifistatemachine.
Did you try flashing an older stock rom?
I have a phone with the same problem and it believe it is a hardware problem because stock and custom kk, lp, and M ROMs do not solve the problem. After swapping out the motherboard, everything was fine.
I have not yet. I was trying to create a nandroid backup first, but NRT doesn't seem to want to let me do that because i don't have a modified boot image.
Hi experts
I tried to help someone out with his Galaxy S6 925i, today. He told me the following:
-The phone at been modified (don't know what) by his cousin
-After "a while" the TOUCHscreen stopped working
-Don't know based on what, but he suspected the problem to be in the kernel
-Factory reset no effect
So I said I tried my best and downloaded the appropriate 6.0.1 stock ROM from Sammobile and flashed it via Odin. No effect. Question here: These ROMs do come with a kernel, do they? So that should have fixed any kernel issue??
So because that didn't work and as you can see I'm not 100% sure about the kernel issue, I tried to follow this procedure to get a new kernel installed:
http://forum.xda-developers.com/gal...g920i-marshmallow-6-0-1-t3339394/post65906864
So I flashed the recovery and started it. No TOUCHscreen functionality.
Am I right to assume that I have proven that the touch (un)functionality is NOT a software but a hardware issue? Because the recovery should work no matter how screwed the ROM is?! Cause that person is going to get a screen replacement tomorrow, and if that new screen then doesn't work I'm kinda like screwed...
Another question: Is flashing with 'AP' via Odin the same as flashing via recovery? So could I flash any file that I usually would use the recovery for also flash via Odin? Because if I wanted to flash a new kernel without a working recovery, I would have to use adb (right?). But I can't use adb, because I can't enable USB-debugging, cause the screen's not working...
Thanks heaps for helping out!