So i was using elixir for a while and it was getting buggy and slow and i haven't seen that much support from the developer so i decided to switch to xTraSmooth
Upon loading the rom up i decided i wanted a fresh slate and none off the apps or app data from previous roms
So i (Dont put the rom.zip back onto the phone) and wipe everything. After that i had no usb access. So i fiddled around with uninstalling and reinstalling the drivers until sideload would work
i sideloaded the rom and booted into it. First red flag was that i had no sim card. After i went through the welcome screen i noticed i had no soft keys, no top bar, no simcard, no wifi, no nothing.
I looked into the settings>about phone and noticed i have no baseband version so i think there is no radio?
EDIT: I had usb access after so i loaded the rom normally and flashed the zip. Same result.
If anyone could tell me whats wrong and help me get a clean xTraSmooth version on my phone that would be very much appreciated
Thank you for the help!
No? No one knows anything?
Try to flash again and also flash the radio. ZIP is with the folders of the developer of this rom.. That might help.
Delux20 said:
So i was using elixir for a while and it was getting buggy and slow and i haven't seen that much support from the developer so i decided to switch to xTraSmooth
Upon loading the rom up i decided i wanted a fresh slate and none off the apps or app data from previous roms
So i (Dont put the rom.zip back onto the phone) and wipe everything. After that i had no usb access. So i fiddled around with uninstalling and reinstalling the drivers until sideload would work
i sideloaded the rom and booted into it. First red flag was that i had no sim card. After i went through the welcome screen i noticed i had no soft keys, no top bar, no simcard, no wifi, no nothing.
I looked into the settings>about phone and noticed i have no baseband version so i think there is no radio?
EDIT: I had usb access after so i loaded the rom normally and flashed the zip. Same result.
If anyone could tell me whats wrong and help me get a clean xTraSmooth version on my phone that would be very much appreciated
Thank you for the help!
Click to expand...
Click to collapse
Did u ever get it fixed I just got the same problem
Related
Hi everyone,
I'm sorry I'm quite new to this, and I'm afraid I've gotten myself somewhat stuck with my Nexus S. Yesterday I managed to root it, install superuser, as well as clockwork mod. Today I wanted to try a new rom and after some attempts, it seems I no longer have any working roms on my phone. After much searching with no luck, I turn to you guys for your expertise.
So I am able to see fast boot upon pressing the volume up and power buttons, and am certainly able to choose recovery and get into clockwork mod. Within clockwork mod I can mount USB storage, so I can transfer roms to the internal SD card. I've tried 3 or 4 roms, some say they install correctly, others not, and after trying to boot after any installation I simply get stuck at the google screen with the lock image at the bottom. The only things I have "deleted" is wiped the data and cache. I have no idea, but I think I may have erased the bootloader image or something else that I should not have that is required.
I have a i9020a model (non-4g model I believe), can you pleeeeeeeeeeeeeaaaassee help me!! I just want to get back to gingerbread 2.3.6, and my phone back up and running the way it was. I've become quite nervous after some searching with some saying a resistor mod is needed on the hardware!!
Your okay cause you can get into fastboot and recovery so don't worry. Maybe the rom you downloaded is not for your phone. Did you make a nandroid backup before flashing the rom? If yes then go into backup and restore from clockwork recovery to go back to stock.
Sent from my A500 using Tapatalk
If you can get to recovery, just flash the stock image FOR YOUR PHONE. Then you can go through and reroot..don't worry, you'll get the hang of it.
Sent from my Nexus S using Tapatalk
So my phone is not "bricked" as they say?? I'm not in big trouble?
I did not make a nandroid backup What kind of image am I looking for and how do I install it on the phone? I know my phone is of the variant i9020a, but how am unsure of how much more specific I should be looking for.
Looking at the following post: http://forum.xda-developers.com/showthread.php?t=1063664.
Should I try installing the Android 2.3.6/GRK39F/UCKF1 Radio/KA3 Bootloader option?
Choose the latest 9020a version of the FULL ROM, which is what you have already have eyes on.
I've tried installing the file I mentioned above, but I get a status 7 error when trying to install, and the install is aborted.
Could I get some more assistance please? Can anyone point me to a correct, full rom? Or perhaps I'm installing it incorrectly, could someone be so kind to outline the correct steps to a proper install?
Edit: I think the above mentioned file is for a GSM model, I'm sure I have the CDMA version.
Also, somewhat good news. I managed to install the oxygen rom, but for the 4g version and installed fine with no errors, but I have no service. What does this indicate, as I still want to restore back to a factory version (non-4g) of gingerbread 2.3.6.
What CWM version do you have? Is it 3.0.0.0?
Also, if you have no service, it's likely that you downloaded a ROM with an incorrect radio.
Edit:
If you have CWM 3.0.0.0, make sure to download the latest version, found in this thread: http://forum.xda-developers.com/showthread.php?t=988686 (use 5023-cyan.img). You flash this the same way you did CWM previously, though in the terminal make sure you type out the 5023-cyan.img file name.
Next, download the stock ROM from this thread: http://forum.xda-developers.com/showthread.php?t=1063664. Simply look for your phone version, and you'll find the correct software variant.
Maybe you've fixed your phone already; if not, I hope this helps!
I wish you the best of luck. Oh, and through problems like these, you come to learn a lot more about your phone. That's what I've found, at least.
At the thread you mentioned above there is a version with a different radio, you might want to give that one a try.
You also said that you only wiped data and cache, so maybe you should do a full wipe before. Not doing that can sometimes lead to problems.
Sent from my Nexus S using XDA App
To be brief, the phone is up and running as brand new! Thank you so very much everyone. It seems the error was with CWM, as I was able to install and boot a 4g oxygen rom on my phone, I went into rom manager, and at the bottom of the list was an option to upgrade to 5.x. Installed the CWM update, wiped everything and was able to install the factory rom, no issues, and everything works just as I remember
I have most certainly learned more about my phone, and I am going to look at it as a rather stressful learning experience rather than a mistake on my part.
But a sincere thanks to everyone once again, I posted this at like 4am here and had a response within a few minutes, I was pulling my hair out haha!
Flashing to stock rom will help you out. You can get stock roms from Internet simply by searching in Google...
Sent from my Nexus S using XDA App
Hey everyone,
I used to have a Sidekick 4G that was rooted and ROM'd so Im not neccessarily a noob to this, but still a bit. I bought an LG Optimus T (T-Mobile) as a replacement for my broken Sidekick. I'd had the phone before so I knew it was a decent phone, and for $40 on eBay, a deal I couldn't pass up.
Here's the story: I rooted my phone and got a ROM loaded on New Years Day. ROM was fine, but I decided I wanted to change to a newer version of CyanogenMod this past Saturday(1/5). So after testing out a few ROM's, I came across one that unfortunately didn't flash properly. When I tried to go to use the phone, the main Android OS crashed. I had a black screen with the nav bar displaying no SIM card(which was accurate), the time, battery life, and no signal. Once my boyfriend got home and was able to get the phone to finally boot into CWM and flash into the new ROM, even with my SIM card in, I had no signal. I thought maybe it was an issue with the APN so I went in to try to fix it and none were listed. When trying to add one it, it never saved.
My recovery in CWM goes back to the broken ROM, unfortunately. When trying to unroot, Superuser begins to not respond when its trying to uninstall either busybox or Superuser. The phone works fine, I can connect to WiFi and use it and everything.
My question for you today is does anyone have a recovery of the stock ROM that they can post that I can flash into, or any tips on how to fix this? I thought maybe my SIM card is fried for Android, so I thought of calling into T-Mobile to have them activate a spare I have laying around, but would that fix the issue?
I really appreciate any help that you guys can provide. Thanks in advance!
kaitthedork said:
Hey everyone,
I used to have a Sidekick 4G that was rooted and ROM'd so Im not neccessarily a noob to this, but still a bit. I bought an LG Optimus T (T-Mobile) as a replacement for my broken Sidekick. I'd had the phone before so I knew it was a decent phone, and for $40 on eBay, a deal I couldn't pass up.
Here's the story: I rooted my phone and got a ROM loaded on New Years Day. ROM was fine, but I decided I wanted to change to a newer version of CyanogenMod this past Saturday(1/5). So after testing out a few ROM's, I came across one that unfortunately didn't flash properly. When I tried to go to use the phone, the main Android OS crashed. I had a black screen with the nav bar displaying no SIM card(which was accurate), the time, battery life, and no signal. Once my boyfriend got home and was able to get the phone to finally boot into CWM and flash into the new ROM, even with my SIM card in, I had no signal. I thought maybe it was an issue with the APN so I went in to try to fix it and none were listed. When trying to add one it, it never saved.
My recovery in CWM goes back to the broken ROM, unfortunately. When trying to unroot, Superuser begins to not respond when its trying to uninstall either busybox or Superuser. The phone works fine, I can connect to WiFi and use it and everything.
My question for you today is does anyone have a recovery of the stock ROM that they can post that I can flash into, or any tips on how to fix this? I thought maybe my SIM card is fried for Android, so I thought of calling into T-Mobile to have them activate a spare I have laying around, but would that fix the issue?
I really appreciate any help that you guys can provide. Thanks in advance!
Click to expand...
Click to collapse
u are not getting a signal because u are on the old baseband
flash gingersnap by neko95 it has support for both baseband
and press thanks
androidisfuture said:
u are not getting a signal because u are on the old baseband
flash gingersnap by neko95 it has support for both baseband
and press thanks
Click to expand...
Click to collapse
I just flashed Gingersnap and still have the same issue. No signal, no APN.
kaitthedork said:
I just flashed Gingersnap and still have the same issue. No signal, no APN.
Click to expand...
Click to collapse
please read the gimgersnap page
it has terminal command
open terminal emulator
first type su
then press enter
then type fixbb
Lolz!!
Upgrade to new baseband or flash baseband fix 'after' flashing a rom!!
Download the fix from my signature below. (1st link)
Flash this fix same like flashing a rom from CWM!!
Motorola XOOM Z604 32GB IHDT56MT1
Sorry if there was another thread about this, but i looked and didn't find any
Anyway friend of mine flashed some kinda rom he says official 4.1.1 JRO03H, but i'm not sure
anyway as he said after OTA tab is freezing randomly and gives android keyboard error
so i assumed i can unlock/root and flash some custom rom that will resolve the problem
after using AIO tool and unlocking/rooting/flashing various roms problems persists
sometimes tab is crashing during start up (android loading) sometimes just randomly by touching/using absolutely random
using tiamat recovery 3.2.2 and TWRP, it's rock stable in recovery
so i assume it's hardware related
any ideas, cause i'm out of any
p.s. it does have a sim card slot, but judging by FCC code it's wifi only
p.s. i tried to flash stock rom and lock it, still freezing and crashing randomly, first at wifi menu then at internet browser, guess something is really hardware related, possibly memory got corrupted or something like that
p.p.s now i'm not even sure which xoom this one is, is it a wifi only or 3g and maybe it needs some different stock rom? most confusing tab i've seen so far, there is just so many variation of this
thnx in advance
Mortibus said:
Motorola XOOM Z604 32GB IHDT56MT1
Sorry if there was another thread about this, but i looked and didn't find any
Anyway friend of mine flashed some kinda rom he says official 4.1.1 JRO03H, but i'm not sure
anyway as he said after OTA tab is freezing randomly and gives android keyboard error
so i assumed i can unlock/root and flash some custom rom that will resolve the problem
after using AIO tool and unlocking/rooting/flashing various roms problems persists
sometimes tab is crashing during start up (android loading) sometimes just randomly by touching/using absolutely random
using tiamat recovery 3.2.2 and TWRP, it's rock stable in recovery
so i assume it's hardware related
any ideas, cause i'm out of any
p.s. it does have a sim card slot, but judging by FCC code it's wifi only
p.s. i tried to flash stock rom and lock it, still freezing and crashing randomly, first at wifi menu then at internet browser, guess something is really hardware related, possibly memory got corrupted or something like that
p.p.s now i'm not even sure which xoom this one is, is it a wifi only or 3g and maybe it needs some different stock rom? most confusing tab i've seen so far, there is just so many variation of this
thnx in advance
Click to expand...
Click to collapse
The wifi xoom also has a sim card slot but it does not work( missing the radios).
Can you get into recovery and which one is it (custom CWR or stock)? With the xoom off press power until the moto dual core logo appears then press volume down after 3 seconds. You will see android recovery written on top press volume up. If you still have a custom recovery you can then install 4.1.1 JRO03H again but do a factory wipe (very important to get rid of any possible corruption) before and a cache dalvik cache wipe before.
If you are still having issues you can fastboot the stock honeycomb wifi images and allow the updates to happen automatically but this will wipe all of your data. I can walk you through this.
i did mentioned recovery in my post, otherwise how the hek would i be able to flash it in the first place duhh
i did all that, i even tried stock image 3.01 let it update it all the way up to the 4.1.1 which kept giving me weird android keyboard stopped working error and same random freezes
most stable was honeycomb though, i could stay in the system sometimes longer before touching anything, i even let it on lock screen for an hour or two and wouldn't freeze, in ics and jb it froze on lock screen, sometimes wouldn't even let me pass welcome/choose language
i just don't understand how can it install without any problems and stock/custom recoveries being stable while in OS it's just freezing for no apparent reason, my theory is something wrong with video part of the chipset, then again i simply dunno anymore
i tried several times factory defaults and wiping cache before and after flashing didn't helped
Good luck
hey im new to the forum and i rooted my s3 and have the r420 senergy rom installed but the wifi dooesnt work! uhhhhh i cant post in the development section till i have 10 posts. so any one who can help that would be great. ive been doing a lot of reading and what is the differnce between nightly and and regular roms? and i read that the wifi wont work on the nightly rom with out a kernel flash?>?>? Is this right? im going to try the v1.6 senergy any way .....my model is the i535 but yall probably already know that because you hacked my ip address and seen my phone plugged in J/K ha thanks in advance
First off, Synergy r433 is the latest version. And a new release is scheduled to drop any minute now.
A nightly is an experimental build that gets updated nightly. Whereas a stable build is less frequent but as the name suggests is stable. Nightly you must really know what you're doing and are be okay with occasional bugs, otherwise use the stable releases. (fyi SynergyROM stopped releasing nightlies)
As for your Wifi problem, reflash but the make sure you do a full factory reset, and then a super wipe within the AROMA installer. *This will wipe internal storage, make sure to have the ROM zip on external storage* Wifi is not bugged, I'm suggesting the was a flashing error.
Sent via SGS3 using Tapatalk
Thank you so much for replying. i was thinking the same about the nightly "name" but thanks for clarifying. i have tried several times. in clockworkmod recovery(or whatever the name is) i factory reset and in the installer i wipe everything. (on the internal sd) and then install cleanly. but my kernel doesnt flashed it says its not unlocked.?!?! how do i unock it? i unlocked the bootloader and once more so i knew for sure. and my phone says custom with a padlock unlocked symbol below. but same thing everytime...wifi is buggy. i like this rom and just want it to work...thanks!!!!!!!!!!!!! is there a special "better" kernel unlock method? my paitients are getting low...lol well my girl wants her phone stock ...F**CK THATT!!!!!!!!!! thanks man
Bump please someone plesase help.. I need this phone working asap
Check out this link
seems to work for some.
http://forum.xda-developers.com/showthread.php?p=40531554
Mine has always been good.
I also use an app called Opensignal
https://play.google.com/store/apps/details?id=com.staircase3.opensignal
When on the OpenSignal app select > wifi then select the > refresh then the > refresh network.
I do this every week or so. I have no issues with wifi, ever.
Some say tightening the screws
help check out rhe link below
http://gs3.wonderhowto.com/how-to/s...-gps-problems-your-samsung-galaxy-s3-0145332/
I hear it's just some phones. Anyways
good luck
Sent from my Smoking smooth
Synergy r484
Mods by gunthermic,
Theme by jbeitel
I am experiencing the same issue.
I rooted, flashed CWO, and then installed synergy. Nothing worked... then I read that you need to unlock the bootrom so I did that, rebooted and got the same... no wifi. After unlocking the bootloader I reinstalled synergy (R484) and still WiFi will not turn on.
I followed they synergy thread for flashing and This thread for bootloader unlocks.
Provider: Verizon
Phone: GS3
ROM: SynergyROM (r484)
Recovery: ClockworkOrange
Got it fixed!
So... I only used odin... no romloader apps or any of that crap...
1: Reinstalled stock ROM
2: Reinstalled CWO
3: Reinstalled Root+Bootloader
4: Reinstalled SynergyROM
5: Enjoy! Wifi works, all applications work!
Chris
This is consistent across every CM14 ROM I've flashed. I am upgrading from CM13.
The signal bar at the top is blank as in "no service", it attempts to reconnect and show a signal for a split second but then goes back to "no service" again. When I remove my SIM card and reboot the problem simply vanishes, but of course I can't get LTE
Firmware: PCA
Recovery: TWRP 3.0.1.0
I have tried running the ROM stock with no data restore and I have tried flashing APN settings from this post.
I at first thought it was a CM14 bug but then I read that others had no problems with CM14 ROMs.
Assuming you actually have a SM-G900P (since a lot of people ignore that little detail) it's probably a matter of Cm14/14.1 doesn't appear to be wholly happy with anything other than the latest baseband, which is now PK1. To get it, just reflash to stock with Odin and then poke at the thing until it gets the two OTA updates that will bring you up to PK1. At that point if you like you can poke at the controls to update the PRL and Profile (just to be sure everything's good) and then let me suggest you make a call or two and/or send some SMSes to be sure you didn't mess something up when you tried to change the APN settings one almost never needs to touch, and then flash TWRP (or whatever recovery you use) right back in and sideload the Cm14.1 nightly and open-gapps for 7.1. Also, you will need to do a factory reset after upgrading to 14.1 or you'll get a wholly different set of misbehaviours out of the phone (trust me... I deliberately cut corners through multiple rounds of reflashing to find out what symptoms to look for). One of the more endearing failures can be no soft keyboard, nobody wants that.
I had a bunch of weirdness happening (including completely non-functional GPS) with CM14 a few days ago, and since the changelog doesn't seem to show anything addressing the screwy problems I had, it hints very strongly that people will need to update to PK1 before they can expect the device be reliable.
OH... and don't try and enable Adoptive Storage if it asks. The performance is abysmal for some reason (around 2Mb/s on a Class-10 card that otherwise hums along at 14Mb/s) and it will make any apps that are trying to use storage run like crap.
So people have it working on PK1? Has anyone had it working on PCA?
Edit: Odin restored PK1, it didnt want to boot after the reflash. I installed TWRP and restored a PCA Backup, updated PRL and profile. I flashed a cm14.1 ROM and still had the same issues.
It also didn't wipe my internal storage when I ran odin, which I remember it doing in the past.
Worked great on my S5 900P
Gracefully I got it to work on Resurrection Remix. Idk if it was the APNs or just more stable ROMs.
I booted RR stock w/o gapps, I went to enter in the APN settings using this site and it just magically worked after I entered in only the first line. It's hard to tell if it was because the ROM found out how to connect or if the first line of the APN settings triggered something.