Database Info

[Q] Sticky Bit Fastboot

So... Anyone have any experience getting sticky bit turned off on fastboot? My phone boots to it anytime I try to reboot or do a regular boot up.

fallnSaint said:
So... Anyone have any experience getting sticky bit turned off on fastboot? My phone boots to it anytime I try to reboot or do a regular boot up.
Click to expand...
Click to collapse
Mine did that for a short while after I screwed up a flash, I reflashed boot and while running tossed the adb command to get into fastboot and then left it properly. Haven't seen it since.

KitsunePaws said:
Mine did that for a short while after I screwed up a flash, I reflashed boot and while running tossed the adb command to get into fastboot and then left it properly. Haven't seen it since.
Click to expand...
Click to collapse
To clarify... Flash boot from recovery, while that is running adb reboot bootloader? If that is the case I have a different set of problems to "boot", I can't get my pc to recognize the phone while in recovery. Everything else is recognized, even reinstalled drivers to be certain, pc doesn't even try to install a driver for recovery. Tried both TWRP & CWM.

fallnSaint said:
To clarify... Flash boot from recovery, while that is running adb reboot bootloader? If that is the case I have a different set of problems to "boot", I can't get my pc to recognize the phone while in recovery. Everything else is recognized, even reinstalled drivers to be certain, pc doesn't even try to install a driver for recovery. Tried both TWRP & CWM.
Click to expand...
Click to collapse
Memory is fuzzy but I'm pretty sure I did it from fastboot, this happened to me about the time shabby was trying to fastboot boot boot.img and I ended up flashing it instead.

KitsunePaws said:
Memory is fuzzy but I'm pretty sure I did it from fastboot, this happened to me about the time shabby was trying to fastboot boot boot.img and I ended up flashing it instead.
Click to expand...
Click to collapse
I had this same issue when porting TWRP ^^^.
I can't seem to find my posts on it right now, but someone just said do a clean flash. No problems since

how did you do this please!

fallnSaint said:
So... Anyone have any experience getting sticky bit turned off on fastboot? My phone boots to it anytime I try to reboot or do a regular boot up.
Click to expand...
Click to collapse
Okay, this will probably help you...while your device is in Sticky Bit Factory Fastboot, open up a command prompt and connect to your device (given you know how to do so in your folder containing your fastboot app and drivers). Then type "fastboot oem fb_mode_clear" This command will allow your device to boot into system normally. Problem is (I think) when a failed flash occurs sometimes it sets your device in that mode and the above command clears it. Another way to manually place a device in the same state you described is to enter this command using fastboot: fastboot oem fb_mode_set. I believe that is how RSD Lite automatically reboots your device into factory fastboot mode after flashing partitions (.mbn) on your system so that it may resume flashing the boot, recovery, and system images, etc. Let me know if it helps.....
Sent from my XT897 using xda premium

TF300T 4.2 TWRP Error

Hi XDA,
I am a complete noob, and this is my first time posting, so bear with me.
Some time ago I rooted and unlocked my TF300 with SuperSu. Recently I wanted to upgrade to 4.4 kitkat. However, my Tablet was stuck at Andriod 4.1 because of the the unlock.
I went to manually update my TF via the Asus website. I installed the 10.6.1.8 using my TWRP 2.5, and Oem 4.1 OS. Installation worked just fine. After install, I booted up and I had 4.2 with everything working correctly.
Next step was to install TWRP 2.7.0.1. I reset my TF and went into RCK to see something went wrong when updating.
My TWRP will not load, and I get the Android on his back with the red triangle when I try to enter RCK.
Thanks in advance!!

I managed to install 10.6.1.27, but it did not change anything with my boot loader.
I downloaded motochopper, but that didn't seem to work, just told me my abt was out of date. SuperSu isn't working now either, "No Binary, There is a problem."
How do I install TWRP 2.7 with no boot loader? Please help.

TallMilk said:
I managed to install 10.6.1.27, but it did not change anything with my boot loader.
I downloaded motochopper, but that didn't seem to work, just told me my abt was out of date. SuperSu isn't working now either, "No Binary, There is a problem."
How do I install TWRP 2.7 with no boot loader? Please help.
Click to expand...
Click to collapse
Most people just install TWRP via fastboot like
Code:
fastboot -i 0x0B05 flash recovery twrp.blob
You could try using other root methods, like Framaroot or Kingo. I think Kingo was reported to work on the latest stock version.

cmendonc2 said:
Most people just install TWRP via fastboot like
Code:
fastboot -i 0x0B05 flash recovery twrp.blob
You could try using other root methods, like Framaroot or Kingo. I think Kingo was reported to work on the latest stock version.
Click to expand...
Click to collapse
I will look into that, but I am pretty sure I was already rooted, unless losing my boot loader means I am no longer rooted.
Another thing, I can't find a twrp.blob for 2.7, just a zip. I have one for 2.5, but that is useless because I already have 4.2. I also have not been able to find a working link to fastboot.
If anyone could give me a link to the fastboot or a link to a tutorial, that would be amazing. I have done my research, but all the lingo and different methods can be mind bending.
Thanks

TallMilk said:
I will look into that, but I am pretty sure I was already rooted, unless losing my boot loader means I am no longer rooted.
Another thing, I can't find a twrp.blob for 2.7, just a zip. I have one for 2.5, but that is useless because I already have 4.2. I also have not been able to find a working link to fastboot.
If anyone could give me a link to the fastboot or a link to a tutorial, that would be amazing. I have done my research, but all the lingo and different methods can be mind bending.
Thanks
Click to expand...
Click to collapse
You can get the img (which substitutes as a blob) from extracting it from the TWRP 2.7 zip file.
1) You will need ADB and fastboot for this: http://forum.xda-developers.com/showthread.php?p=42407269. I would suggest keeping the tablet at least at 50% battery.
2) Install Naked Drivers. This may be optional for you. If you can proceed to the next step without, you won't need it.
3) Enter fastboot by rebooting and holding down the power button. TF300 enters fastboot automatically since this is 4.2 BL.
4) Next we need to enter a command. In side the ADB folder, hold shift and right click. Then select Open command window here.
first check to make sure the device is connected:
Code:
fastboot devices
The device serial number should be listed.
enter command:
Code:
fastboot flash recovery twrp.img -i 0x0b05
Blue bar on device will fill. Be patient.
5) Reboot the Device back into Android. This is an important step.
6.) Go back into TWRP and install what you want.

You are amazing. I will give it a try tonight and report back!

cmendonc2 said:
You can get the img (which substitutes as a blob) from extracting it from the TWRP 2.7 zip file.
1) You will need ADB and fastboot for this: http://forum.xda-developers.com/showthread.php?p=42407269. I would suggest keeping the tablet at least at 50% battery.
2) Install Naked Drivers. This may be optional for you. If you can proceed to the next step without, you won't need it.
3) Enter fastboot by rebooting and holding down the power button. TF300 enters fastboot automatically since this is 4.2 BL.
4) Next we need to enter a command. In side the ADB folder, hold shift and right click. Then select Open command window here.
first check to make sure the device is connected:
Code:
fastboot devices
The device serial number should be listed.
enter command:
Code:
fastboot flash recovery twrp.img -i 0x0b05
Blue bar on device will fill. Be patient.
5) Reboot the Device back into Android. This is an important step.
6.) Go back into TWRP and install what you want.
Click to expand...
Click to collapse
Installed adb fastboot. However, my device does not automatically go into fastboot, I still have to hold down the volume key.
Once I am in fastboot usb (with the 3 icons), I fastboot successfully and get the serial number, then when I type the 'fastboot flash recovery twrp.img -i 0x0b05' command I get this error: cannot load 'twrp.img' : No error
I am attemping to use the 2.7.0.1 twrp from the 4.4.2 page. I have extracted the recovery.img (tried renaming to twrp and left it the same) and placed it in the root of both my external and internal sd.
I have now tried it with .zips .img .blob and I receive the same error everytime. Not sure what I am doing wrong now.

TallMilk said:
Installed adb fastboot. However, my device does not automatically go into fastboot, I still have to hold down the volume key.
Once I am in fastboot usb (with the 3 icons), I fastboot successfully and get the serial number, then when I type the 'fastboot flash recovery twrp.img -i 0x0b05' command I get this error: cannot load 'twrp.img' : No error
I am attemping to use the 2.7.0.1 twrp from the 4.4.2 page. I have extracted the recovery.img (tried renaming to twrp and left it the same) and placed it in the root of both my external and internal sd.
I have now tried it with .zips .img .blob and I receive the same error everytime. Not sure what I am doing wrong now.
Click to expand...
Click to collapse
Put the twrp.img into your ADB folder, where you installed it. Then run the next command.

cmendonc2 said:
Put the twrp.img into your ADB folder, where you installed it. Then run the next command.
Click to expand...
Click to collapse
Awesome! Worked like a charm. twrp 2.7.0.1 installed perfectly.
Then I tried to flash the cyanogenmod. Said it installed fine, but it just gets stuck on the loading screen...

I am trying to do exactly what TallMilk is doing...put Cyanogenmod on my tablet. It is my understanding that I have to unlock my bootloader though? Which I have tried doing a million different ways with the Asus Unlock tool which always gives me an error.
If I follow the instructions posted above I will be able to flash Cyanogenmod without unlocking my bootloader?

SilentSpartan said:
I am trying to do exactly what TallMilk is doing...put Cyanogenmod on my tablet. It is my understanding that I have to unlock my bootloader though? Which I have tried doing a million different ways with the Asus Unlock tool which always gives me an error.
If I follow the instructions posted above I will be able to flash Cyanogenmod without unlocking my bootloader?
Click to expand...
Click to collapse
Finally got it to work. I had to do a wipe first, read about old roms interfering with new installations.
SilentSpartan, I used SuperSU last year to root and unlock my tablet when it was still a 4.0 android to flash to 4.1. This recent update was from 2.5 TWRP on a rooted device running 4.2. When I installed 4.2, it blew away my TWRP, and I had to flash the new TWRP 2.7.0.1.
That flash from OEM fastboot to TWRP 2.7.0.1 is what I needed help with.

TallMilk said:
Finally got it to work. I had to do a wipe first, read about old roms interfering with new installations.
SilentSpartan, I used SuperSU last year to root and unlock my tablet when it was still a 4.0 android to flash to 4.1. This recent update was from 2.5 TWRP on a rooted device running 4.2. When I installed 4.2, it blew away my TWRP, and I had to flash the new TWRP 2.7.0.1.
That flash from OEM fastboot to TWRP 2.7.0.1 is what I needed help with.
Click to expand...
Click to collapse
Damn, so I'm screwed. Why does Asus have to such so much...? You can no longer unlock afaik.

SilentSpartan said:
I am trying to do exactly what TallMilk is doing...put Cyanogenmod on my tablet. It is my understanding that I have to unlock my bootloader though? Which I have tried doing a million different ways with the Asus Unlock tool which always gives me an error.
If I follow the instructions posted above I will be able to flash Cyanogenmod without unlocking my bootloader?
Click to expand...
Click to collapse
You're going to have to unlock no matter what. Did you try both v7 and v8 of the unlocker and calling Asus Support to tell them to put your serial number back into the database (get a manager)?

cmendonc2 said:
You're going to have to unlock no matter what. Did you try both v7 and v8 of the unlocker and calling Asus Support to tell them to put your serial number back into the database (get a manager)?
Click to expand...
Click to collapse
I've tried every firmware and unlock tool combination. Nothing works. I sent them an email a day ago. Depending on there response, maybe I'll try calling. I'm so fed up with this tablet, I'm about to throw it out my window. $400 POS. :good:

SilentSpartan said:
I've tried every firmware and unlock tool combination. Nothing works. I sent them an email a day ago. Depending on there response, maybe I'll try calling. I'm so fed up with this tablet, I'm about to throw it out my window. $400 POS. :good:
Click to expand...
Click to collapse
Did you ever get your tablet fixed? I am having some problems myself after a miserable m9 update.

[Q] cm11 -> cm12 flashing issues

so, i recently updated my oneplus one from cm11 to cm12.1 and when cm12 loaded in, i got a repeated message that com.android.phone has stopped and the quick settings bar displayed that i had no sim card in. so i tried reflashing, and the same problem. i redownloaded and reflashed... same problem.
so, i went into twrp and performed a full wipe, thinking that i'd push a new zip using twrp's mount function. the problem is, when i went to mount, no drive appeared on my computer. and when i went to fastboot to flash it manually, fastboot said that 'Image is not a boot image' . the same thing happens whenever i try to re-flash recovery as well. so how can i get an os back on the system if fastboot won't cooperate and twrp is essentially useless?
tldr; no os on oneplus one, fastboot wont flash boot image, twrp mount and twrp adb wont do anything. What do?

ItsDeadEnd said:
so, i recently updated my oneplus one from cm11 to cm12.1 and when cm12 loaded in, i got a repeated message that com.android.phone has stopped and the quick settings bar displayed that i had no sim card in. so i tried reflashing, and the same problem. i redownloaded and reflashed... same problem.
so, i went into twrp and performed a full wipe, thinking that i'd push a new zip using twrp's mount function. the problem is, when i went to mount, no drive appeared on my computer. and when i went to fastboot to flash it manually, fastboot said that 'Image is not a boot image' . the same thing happens whenever i try to re-flash recovery as well. so how can i get an os back on the system if fastboot won't cooperate and twrp is essentially useless?
tldr; no os on oneplus one, fastboot wont flash boot image, twrp mount and twrp adb wont do anything. What do?
Click to expand...
Click to collapse
What's the exact command you're using with fastboot? Are you only attempting to flash the boot.img? If so, why only that?

Heisenberg said:
What's the exact command you're using with fastboot? Are you only attempting to flash the boot.img? If so, why only that?
Click to expand...
Click to collapse
I am using "fastboot flash boot [zip]" i also tried "fastboot update [zip]", neither of which worked

ItsDeadEnd said:
I am using "fastboot flash boot [zip]" i also tried "fastboot update [zip]", neither of which worked
Click to expand...
Click to collapse
You didn't answer my question, why are you giving that command? There are a dozen or so commands that you're meant to give when flashing with fastboot. The only time you use that command is when you're just trying to flash a kernel.

Heisenberg said:
You didn't answer my question, why are you giving that command? There are a dozen or so commands that you're meant to give when flashing with fastboot. The only time you use that command is when you're just trying to flash a kernel.
Click to expand...
Click to collapse
what commands would you suggest i do then? because those are the only things i used other than the wipe command

ItsDeadEnd said:
what commands would you suggest i do then? because those are the only things i used other than the wipe command
Click to expand...
Click to collapse
Well it depends on what you're trying to do. As I said, the "fastboot flash boot boot.img" command will only flash a kernel. You really shouldn't be messing around with fastboot if you don't actually know what you're doing, that's how phones get bricked. Go to my guide and follow the instructions in section 8:
http://forum.xda-developers.com/showthread.php?t=2839471

[SOLVED]
apparently sometime between me instlling cm11 and installing cm12, my oem got re-locked. which prevented me from flashing anything new.
i ran:
fastboot oem unlock
and fastboot flash boot boot.img
and voila
help thread for those with the same problem
http://forum.xda-developers.com/show....php?t=2839471
thank you for the help!

Moto G bricked?

Hey guys this is my first thread, I hope it's in the right section
Here's my problem:
Yesterday my Moto G 2013 with CM12.1 just froze (I could turn the screen on and off but that was it)
I tried opening the reboot menu, which worked, but it got stuck on "rebooting", so I just holded the power key until it turned off.
After that I got to the boot logo, but nothing happened from there, not even the boot animation showing up.
Next I tried to boot into TWRP, but it only got to the TWRP boot logo and nothing happened after that, so I flashed CWM, which I could access, but when trying to flash something it just doesn't progress. When I press "reboot to bootloader" on CWM it just freezes there aswell.
In another thread I read that flashing the gpt.bin should fix everything but it didn't help.
I don't really want to perform a factory reset, because of the data loss, but I think this would be my only option.
My question is:
How can I fix my phone (preferably without a factory reset), for example by getting TWRP to work again, because I have a Backup of my system and a zip of CM12.1 on it?
Btw another thing to mention is that when being in Recovery/System USB doesn't really work, but if my phone is turned off or in bootloader it works just fine.

Try "fastboot boot twrp.img" (or whatever the exact name of your TWRP image is). If it gets at least to the curtain screen, run "adb pull /tmp/recovery.log".

_that said:
Try "fastboot boot twrp.img" (or whatever the exact name of your TWRP image is). If it gets at least to the curtain screen, run "adb pull /tmp/recovery.log".
Click to expand...
Click to collapse
When I try "fastboot boot twrp.img" it reboots and get's stuck at the boot logo of android (Motorola logo) and I can hear the "Device disconnected" sound of windows.
But I flashed TWRP into recovery and it get's to the curtain screen. But it doesn't recognize my phone which might have to do with that as soon as it boots into a system USB just won't work

The following command will get TWRP working: fastboot erase userdata

lost101 said:
The following command will get TWRP working: fastboot erase userdata
Click to expand...
Click to collapse
But this will delete everything like my pictures folder, right? Isn't there a way to backup these files ?

@Ju43
adb pull /sdcard/ c:/motog_backup/​

lost101 said:
@Ju43
adb pull /sdcard/ c:/motog_backup/​
Click to expand...
Click to collapse
But adb only works in recovery mode in android, which I can't access right now without deleting everything, right ? And if I delete userdata, will my TWRP backup be deleted, too ? (It's just a backup of my system)
(sorry for asking so many questions, but I really don't wan't to lose all my photos and stuff)

Ju43 said:
But adb only works in recovery mode in android, which I can't access right now without deleting everything, right ? And if I delete userdata, will my TWRP backup be deleted, too ? (It's just a backup of my system)
(sorry for asking so many questions, but I really don't wan't to lose all my photos and stuff)
Click to expand...
Click to collapse
Yes, you do need at least access to recovery mode for adb to work. Try testing TWRP even if it is only partially loading. Also try CWM.
Everything will get erased on internal storage, photos, TWRP backup etc. Unfortunately, you may be left with no alternative.

lost101 said:
Yes, you do need at least access to recovery mode for adb to work. Try testing TWRP even if it is only partially loading. Also try CWM.
Everything will get erased on internal storage, photos, TWRP backup etc. Unfortunately, you may be left with no alternative.
Click to expand...
Click to collapse
Okay, thanks for your answer, but as I mentioned before, as soon as I boot into something like recovery or android, USB doesn't really work anymore (though it seemed to work again in android). Will erasing user data fix this (as it seems to be a software problem) or even better fixing it before erasing userdata, so I can backup my files? And if I erase user data and TWRP/CWM/whatever works, but USB won't then I can't really put a system on it, can I ?

Ju43 said:
Okay, thanks for your answer, but as I mentioned before, as soon as I boot into something like recovery or android, USB doesn't really work anymore (though it seemed to work again in android). Will erasing user data fix this (as it seems to be a software problem) or even better fixing it before erasing userdata, so I can backup my files? And if I erase user data and TWRP/CWM/whatever works, but USB won't then I can't really put a system on it, can I ?
Click to expand...
Click to collapse
Recovery mode ADB can take some effort to make work depending on the version of Windows. Since you obviously want to backup your files, you can try booting into Linux (a livecd will work) and installing adb. Linux adb works without the need for drivers so it may give you access.
If using Ubuntu, the command to install adb/fastboot is:
sudo apt-get install android-tools-adb android-tools-fastboot​

lost101 said:
Recovery mode ADB can take some effort to make work depending on the version of Windows. Since you obviously want to backup your files, you can try booting into Linux (a livecd will work) and installing adb. Linux adb works without the need for drivers so it may give you access.
If using Ubuntu, the command to install adb/fastboot is:
sudo apt-get install android-tools-adb android-tools-fastboot​
Click to expand...
Click to collapse
I see what you mean but I got adb to work most times when android was still working (just not in recovery) but I also had problems with charging when the phone was turned on, so I assume it's a problem with android, but I'll search for a Ubuntu Live CD that should be layng around somewhere here (lol) and I'll try it

@lost101
Ok, I installed adb and fastboot, but now it doesn't even find my phone in bootloader...

Ju43 said:
@lost101
Ok, I installed adb and fastboot, but now it doesn't even find my phone in bootloader...
Click to expand...
Click to collapse
Use: sudo fastboot devices

lost101 said:
Use: sudo fastboot devices
Click to expand...
Click to collapse
Thanks, I didn't think abut that :highfive: fastboot works now, but adb doesn't (again when using fastboot boot TWRP.img the terminal shows that it worked but the phone just reboots and is stuck on the Motorola logo and if I flash TWRP it doesn't work either). Maybe I should mention, that I have that screen flickering and like scanline thingy going on when I boot into recovery.

Ju43 said:
Thanks, I didn't think abut that :highfive: fastboot works now, but adb doesn't (again when using fastboot boot TWRP.img the terminal shows that it worked but the phone just reboots and is stuck on the Motorola logo and if I flash TWRP it doesn't work either). Maybe I should mention, that I have that screen flickering and like scanline thingy going on when I boot into recovery.
Click to expand...
Click to collapse
Can you fastboot boot TWRP.img, then adb pull /sdcard/ ?

lost101 said:
Can you fastboot boot TWRP.img, then adb pull /sdcard/ ?
Click to expand...
Click to collapse
Nope, because as I mentioned it doesn't get to the TWRP logo at all

Ju43 said:
Nope, because as I mentioned it doesn't get to the TWRP logo at all
Click to expand...
Click to collapse
Try CWM.

lost101 said:
Try CWM.
Click to expand...
Click to collapse
Same thing except it started vibratng and didn't stop until restarting after a few seconds 0.o

Ju43 said:
Same thing except it started vibratng and didn't stop until restarting after a few seconds 0.o
Click to expand...
Click to collapse
Maybe you can get the phone booting into Android by fastboot flashing the system.sparsechunks from the Factory Firmware Image for your phone.

lost101 said:
Maybe you can get the phone booting into Android by fastboot flashing the system.sparsechunks from the Factory Firmware Image for your phone.
Click to expand...
Click to collapse
Downloading it right now, could you please exactly tell me what to flash with which command ?

Stuck in Bootloader (Solved)

So i recently tried flashing a new kernel and for whatever reason my pixel 2 did not like that at all. Upon reboot after flashing it now just goes into the download mode where i have the option to reboot bootloader go into recovery and go into download mode. Normally not a big issue at all but this time when i go to load into recovery or load into Download mode its says Operation Denied. Upon a reboot or trying to reboot into safe mode it says ERROR: Slot unbootable: Load Error. Will ADB still work to flash this? not really sure what to do at this moment.
EDIT: Solved it by using Fastboot and flashing the stock firmware without the -w so far everything is back to normal....know to get that dern kernel again

gears177 said:
So i recently tried flashing a new kernel and for whatever reason my pixel 2 did not like that at all. Upon reboot after flashing it now just goes into the download mode where i have the option to reboot bootloader go into recovery and go into download mode. Normally not a big issue at all but this time when i go to load into recovery or load into Download mode its says Operation Denied. Upon a reboot or trying to reboot into safe mode it says ERROR: Slot unbootable: Load Error. Will ADB still work to flash this? not really sure what to do at this moment.
Click to expand...
Click to collapse
First off, does fastboot recognize the device?

DuckRuckus said:
First off, does fastboot recognize the device?
Click to expand...
Click to collapse
It does not under adb devices nothing shows up. In device manager it does show up as Android bootloader interface

gears177 said:
It does not under adb devices nothing shows up. In device manager it does show up as Android bootloader interface
Click to expand...
Click to collapse
ADB=system. Fastboot=boot. You can't boot your phone, so you're not in android, thus no ADB devices. Type "fastboot devices" and see if it's recognized.

DuckRuckus said:
ADB=system. Fastboot=boot. You can't boot your phone, so you're not in android, thus no ADB devices. Type "fastboot devices" and see if it's recognized.
Click to expand...
Click to collapse
Ah nice didnt even realize its recognized under fastboot ive tried flashing the stock recovery but it just gives me an error

gears177 said:
Ah nice didnt even realize its recognized under fastboot
Click to expand...
Click to collapse
Good news! So, your best bet at this point would be to re-flash your current factory image, with /w removed. If you still want that same kernel, flash it before Magisk.
Just out of curiosity, what method did you use to flash it in the first place?

DuckRuckus said:
Good news! So, your best bet at this point would be to re-flash your current factory image, with /w removed. If you still want that same kernel, flash it before Magisk.
Just out of curiosity, what method did you use to flash it in the first place?
Click to expand...
Click to collapse
Flashed it through twrp aroma installer.
What does the -w do in the fastboot command just curious
Nevermind got it flag responsible for deleting userdata thanks alot for the help appreciate your time

gears177 said:
Flashed it through twrp aroma installer.
What does the -w do in the fastboot command just curious
Click to expand...
Click to collapse
It wipes all your data, that's why you remove it from the flash-all.bat script, unless you need to perform a full wipe. Telperion has an excellent guide for installing the lastest software, if you haven't already read it.
I've heard users having back luck flashing kernels in TWRP, as the kernel has something to do with recovery. I always use the method of booting the TWRP image in fastboot, use ADB to push the files to /tmp, and then do an ADB shell TWRP install of those files. TWRP, kernel, then magisk, in that order. I always reinstall all three, just to be on the safe side, and have never had any issues. Takes a little while, but not as long as redoing the whole freaking thing:silly:
Looks like you figured it out, before I finished my reply