Hi, i recently bought a skyrocket, everything work fine, except the audio jack's a little bit touchy. I tested on stock rom from samsung (jelly been) and on avatar rom, so i suppose the problem's hardware.
The problem's when i insert my earplug jack, i can only heard from the left side. I need to maintain and push the jack for earing completly stereo. If i remove the jack a little bit, it work stereo but with fade sound. It do the same thing with a 3.5 stereo and 3.5 stereo+micro version. Is there any fix or something for this device ? Should i try to open it and move the headphone jack ? Do anyone got the same problem too ?
Thx for answering, i could not find anything related to this device. Sorry for my bad english.
Related
Hi
I got a sound problem with my new ASUS P535, in which the phone is all the time thinking that i'm using the headset even when its unplugged, so no sound can be heard even the headset is unplugged only when somebody calls there is the ring tone, but nor the mike or the phone speaker are working
Any ideas?!?
P.S. I'm using WM6, & I already tried to flash it many times for no results!
Bash
Hi,
I had the same problem with my p535, but I found the way to fix it. The problem is that the micro switch was jammed in the headset-port, so to fix the problem; you should just hit hardly the bottom of the PDA onto a table or other hard surface. There is no problem with the software.
Regards,
Sagramor de Zyn
I have tried this solution but it didn't work.
Are you sure this is the only way to fix this problem.
Also when i use the device with the headset, the sound of the MP3's are like you listen something under water. And during a call, the opponent's voice sounds so deep, i can hardly hear it.
Than you have a bit bigger problem, the hole port is ****ed, maybe one of the connection is broken or the hole port is moved from where it should be. It just happening with mp3 or with phone as well? if the phone is not working as well with the headset, than you have to bring to service, 'couse the port is broken, if just the mp3 not workin' than I don't have a clue.
Sagramor de Zyn said:
Hi,
I had the same problem with my p535, but I found the way to fix it. The problem is that the micro switch was jammed in the headset-port, so to fix the problem; you should just hit hardly the bottom of the PDA onto a table or other hard surface. There is no problem with the software.
Regards,
Sagramor de Zyn
Click to expand...
Click to collapse
It worked for me! Thanks a lot!
I thought my PDA speaker was crapped someway..
Anyway, I did not hit it, just plugging in and out the mini jack connector several times within a short time.
Regards,
Xel
Sagramor de Zyn said:
Hi,
I had the same problem with my p535, but I found the way to fix it. The problem is that the micro switch was jammed in the headset-port, so to fix the problem; you should just hit hardly the bottom of the PDA onto a table or other hard surface. There is no problem with the software.
Regards,
Sagramor de Zyn
Click to expand...
Click to collapse
It worked for me as well Thanks a lot!!!!!!
Bobek
Sound problem again (mini jack connector replacement)
Hello again!
My P535 made a long way since the prevoius sound problem.
My device's mini jack connector has been damaged, and I wish to replace it with a new one.
Could anyone help me how to replace the mini jack connector? Unfortunatelly the oroginal connector was so badly damaged that it cannot be used anymore.
My device cannot play sound and cannot record any voice, but the speaker and microphone is fully intact though. I have to repair it but I don't know what type of mini jack connector I need. I heared that if I use some incompatible connector that could damage the device for good.
I'd also find out that two wire must contact to allow the internal speaker and mike to function, for now, the device "thinks" a jack cable is plugged.
Sorry for my bad english..
Could anyone help?
Regards,
Xel
well, I have a bluetooth ad2p stereo headset (platrinocs), but the akkumulator got busted so I'm in a hurry to repair my phone's analog mini jack output, that will will solve the speaker and mike problem too.
/hovewer, the wireless bluetooth headsets has a serious disadvantage
It cannot connect automaticly to the bluetooth headset when a phone call is incoming, or when you enter proximity whith the headset or with the device (if you left either on desk). i've tried patches and apps to make autoconnect available, but no luck.. analog output is much more advance then bluetooth high quality audio for one reason the hardware eq and software mixers/
the main problem, is that the old mini jack output is damaged to dust, i cannot recognize it which type to replace. googling the specs of the device did not helped me identifying the mini jack connector. I've learned that there are many types, some of them are used to headset functions different at model types, even differs at manufacturers.
Please, anyone could help I would greatly appriciate it!
bye,
Xel
Contana said:
I have tried this solution but it didn't work.Are you sure this is the only way to fix this problem.
Click to expand...
Click to collapse
check mini jack output, plug in and move a bit carefully the mini jack cable in output.
probably some air duster or contact spray could help too.
bye,
Xel
thnx a lot... u r great! it works! u r my hero...
I bought yesterday an XDA Exec w/o sound.I changed rom, radio and there was still no sound. Today i opened it, and.. There was sound for few seconds! but only few, now its still w/o sound..
What can it be?
Sounds like thers a loose connection inside the uni
Should be a harware problem... or some sort of loose connection inside the uni
as you said, when u opened it there was a sound for few seconds.. so the first impression is that, there should be some loose circuit connection with the speaker.....
rajivshahi said:
Should be a harware problem... or some sort of loose connection inside the uni
as you said, when u opened it there was a sound for few seconds.. so the first impression is that, there should be some loose circuit connection with the speaker.....
Click to expand...
Click to collapse
it could be...
i see now that mini-jack input don't work too.
So, I've just bought new speakers coz old ones were "masacred", changed it and theres still no sound. What else can it be? I think mainboard is ok coz there was sound but it disappeared.
and can someone explain me how to change mini-jack input in uni? i have new 1 but i dont know how to change it. Old 1 is whole in tin so i guess its broken.
please, anyone?
Try to do hard reset.
Connect a headset through the headset-jack and try listening music. If it works then problem in the jack...
tomal said:
Connect a headset through the headset-jack and try listening music. If it works then problem in the jack...
Click to expand...
Click to collapse
i bought new speakers & mini-jack, connected it to phone and.. speakers still doesnt work, but jack works fine.
possibly a problem with the jack itself, or the plug detection eletronics, IMHO
3.5 Jack
I had this same problem and was the 3.5 jack, what you should do is to open the uni and fix the litle pins inside the jack, after fix it i had never use again the 3.5 jack.
What happens is that the jack is "thinking" that the cable is plugged and that´s the reason why the sound do not came out from the speakers
Saludos
Repair jasjar
Pls check this site for repair your uni, a little expensive but useful
http://www.ppctechs.com/i-mate-JASJAR_496/imate--choose_unit.htm
Saludos
read this post
http://forum.xda-developers.com/showthread.php?t=519328
Hey guys,
I have a problem. If I listen to music or do other stuff with my headphones i have the problem that I need to press my headphones by the jack to hear something, if I don´t do that I have only sound in the left side of my headphones. It doesn´t matter what headphones I use the problem isn´t getting solved by that. I hope you guys can help me.
Greets
Look or there is maybe something in the jack and clean it maybe
I've tried 3 different headphones and the phone never detects anything being plugged into it. It wasn't exposed to any liquids and I've used compressed air to blow out lint. Speakers and bluetooth audio works just fine. Anyway other way to test if the port is working besides plugging in headphones?
EDIT: Soooo it looks like my headphone port isn't broken... I found some app that allows me to re-route my audio and its working perfectly fine. Seems like a software problem to me, anyway to reflash S8+ stock roms on the SD835?
Hi~ Could you please kindly share the app you used to re-route the audio? I got the same problem here. Thank you very much!
Hello,
A few days ago my earphones were working fine in my lenovo P2 but then one day it started to produce muffled sound.
I pulled the headphone jack up a little bit and after some twists only the right side was producing normal music. The headphones are working fine in computer and tried some other headphones also but the problem persists. I even tried the headphones that came with the phone but they are also having the same issue. The strange thing is that my other headphone Sennheiser HD 203 (I think it is one ring jack while the other headphones are 4 ringed) is working fine in it. What could be the issue.
Thanks
I also had the muffuling issue.
I had the issue from the stock ROM only, then went to Oreo but it was still their thou my fix was simple.
I flashed the lineage os 7.1.2 provided by @Wonder Wicked Witch and the problem is gone....do try this BTW everything is working on the ROM.
So do try it.I am currently using it.
I suggest a Hardware caused problem.
Check for collections of dust, hair and other debris that got stuck in the headphone jack. Use pliers to get it out.
Because "normal" headphones work fine and ones that go deeper in (with mic or controls ) don't, I really suggest you check that, because all the dust gets stuffed in to the end of the port, so jacks that aren't as long won't have any issue.
--
Hi. I have a audio problem in my Lenovo p2. The audio is very bad when using a normal earphones, but when I use an Universal earphones like Ubon etc etc., it has the setting in it which makes the audio good. The big problem is that I cannot use any other normal earphones instead I have to use universal earphones like UBON universal earphones. Please help me out with this. I have tried factory reset also many times, the issues is still the same.