Database Info

AR DRONE on HTC DESIRE HD and other Android HTC`s for FROYO !!!!

FOR GINGERBREAD GOTO THIS LINK .......
.
Hi Guys
Here is a guide to show you how to connect your HTC to Ar Drone just as an iPhone would do. This is for FROYO only , if you are on Gingerbread goto this link .
Currently Android does NOT support AD-HOC Networking
Till now I was usung the Manual Infrastructure way which needed a PC Telneting to the AR DRONE to connect to my HTC Wifi Hotspot each time powering on the Ar Drone. This means I had to carry with me a PC each time I want to Power on the AR Drone. Also the HTC WIFI Hot Spot had a limited wireless reachable range so the AR DRONE would easily get disconnected ....
Here is what you need to do , no more PC`s needed once you follow this guide.
P.S. none of this below is my invention, I just searched & found it here and there and complied a guide for you guys.
Here is what you need :
1) A Rooted HTC DESIRE HD or any other HTC
2) Your HTC must be on FROYO Rom
3) Adroid SDK
4) ROM MANAGER with Clockworkmod 2.5.1.3
5) AR.Pro or ARDrone Demo, Application from Market
6) wpa_adhoc_signed.zip file
7) Wifi Tether from market
8) Obviously an Ar Drone
Explanation of everything
#1) and 2) and 3) are Obvious
#4) Most current Rom Managers are on Clockworkmod V. 3.x.x.x these days so you must downgrade to 2.5.1.3 first , Check if you are on 2.5.1.3 or 3.X.X.X
With 2.x.x.x in the RECOVERY MODE, the TEXT are GREEN and with 3.x.x.x the text are in Orange Colour. If your text are GREEN then in the recovery mode then you`re OK goto next step, if not then follow below :
This link shows you how to downgrade your CWM into 2.5.1.3, basically you must download the 2.5.1.3 recovery image and then rename this recovery image into 'recovery.img' and then put it into the TOOLS folder of the ANDROID-SDK folder .... then follow the instructions on the link I mentioned just above. C:\Program Files (x86)\Android\android-sdk\tools (in my case)
This file mentioned above is for Desire HD in other words "ACE" if you are on any other phone, you must find the recovery image of 2.5.1.3 for your phone model !!!
IMPORTANT : Once the Downgrade has been made open ROM MANAGER and click REBOOT INTO RECOVERY , you will still see 3.x.x.x there in Orange Colour, then you must Reboot into Recovery once more and then you will see that the text in Recovery will turn GREEN although it still shows as 3.x.x.x, so if you see GREEN COLOUR you`re all set !!!! if Orange follow the steps again.
#5) Just Download from Market, there is another one called ARDroid but I could not get it working with AR Drone yet.
#6) First download this file "wp6_adhoc_signed.zip" and then put this file on the root of your SD CARD . Once this is placed on the root of your SD CARD , open ROM MANAGER (make sure it`s running 2.5.1.3 or Green Text colour in Recovery) and click REBOOT INTO RECOVERY. Then INSTALL ZIP FROM SD CARD and choose this file wp6_adhoc_signed.zip and flash it into your HTC. Once flashed turn on your AR DRONE and try to see it in the WIRELESS NETWORKS on your HTC , it should look something like this. "ardrone_XXXXXX (adhoc)" if you see this then click to connect and wait for it to connect . Once connected you can disconnect BUT do not press FORGET THIS NETWORK , keep it in the memory of HTC.
IMPORTANT : Take a note of your AR DRONE`s network SSID , you will need it later on . Mine is 'ardrone_124923'
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
#7) Goto this link and download the latest .apk of WIFI TETHER or goto market and try to download it from market, I think Market does not have the latest one. Once downloaded the .apk, place it in the root of your SD CARD or DOWNLOAD folder, locate it and install it using "Astro"
Now Start the WIFI TETHER, then do the following
MENU > SETTINGS > CHANGE SETUP METHOD > into WEXT (adhoc)
MENU > SETTINGS > SSID > into "ardrone_XXXXXX" xxxxxx being your AR Drone`s number that you noted down a few lines above.
MENU > SETTINGS > CHANGE LAN > into 192.168.1.0/24
MENU > SETTINGS > Routing Fix > Must be ticked (I don`t know why but it works like that)
Now press BACK and goto "PRESS TO START TETHERING" and press the sign there
Then the SIGN turns into YELLOW meaning all is OK , if you encounter ERRORS on the screen , Turn OFF/ON the wireless Tether once more, if you still encounter errors then UNINSTALL and REINSTALL WIFI TEHTER. You can check to see if there are any errors from MENU > SHOW LOG
P.S. MAKE SURE YOU ALLOW ALL REQUESTS THAT SUPERUSER.APK IS ASKING PERMISSION FOR !!!
We are almost ready !!!!
When the WIFI TEHTER is on, meaning YELLOW , turn on the AR DRONE and wait for it`s lights to be all GREEN . Once all GREEN then goto AD.PRO or ARDrone Demo application and start the application , that`s it ..... (make sure the default IP address is 192.168.1.1 on your aplication)
For the future uses you only need to turn on WIFI TETHER and then turn on the AR DRONE once all lights are green then open your favorite AR DRONE application and fly away ....
Enjoy , currently I am working on HOW TO ENABLE ADHOC ON GINGERBREAD ONCE I MANAGE IT , I WILL SEND A NEW POST HERE ....

Will this work with Unrevoked root?

I am also on a custom rom (Leedroid) and it works perfectly well
The rom you are using does/should not mater !!!!
Your phone must be rooted !!! This is a must.....

Man... such an incredible pain in the ass.
I used my dads iphone and it worked perfectly in about 5 minutes.
This **** is ridiculous.

AR DRONE on HTC DESIRE HD and other Android HTC`s , GINGERBREAD only !!

FOR FROYO GOTO THIS LINK ......
.
Hi Guys
Here is a guide to show you how to connect your HTC to Ar Drone just as an iPhone would do. This is for GINGERBREAD only , if you are on FROYO goto this link .
Currently Android does NOT support AD-HOC Networking
Till now I was usung the Manual Infrastructure way which needed a PC Telneting to the AR DRONE to connect to my HTC Wifi Hotspot each time powering on the Ar Drone. This means I had to carry with me a PC each time I want to Power on the AR Drone. Also the HTC WIFI Hot Spot had a limited wireless reachable range so the AR DRONE would easily get disconnected ....
Here is what you need to do , no more PC`s needed once you follow this guide.
P.S. none of this below is my invention, I just searched & found it here and there and complied a guide for you guys.
Here is what you need :
1) A Rooted HTC DESIRE HD or any other HTC
2) Your HTC must be on GINGERBREAD Rom
3) Adroid SDK
4) ROM MANAGER with Clockworkmod 3.x.x.x
5) AR.Pro or ARDrone Demo, Application from Market
6) ADHOCv2.zip file
7) Wifi Tether from market
8) Obviously an Ar Drone
Explanation of everything
#1) and 2) and 3) are Obvious
#4) Most current Rom Managers are on Clockworkmod V. 3.x.x.x , so it`s OK, if you`re on 2.x.x.x you might want to upgrade to 3.x.x.x from rom manager.
#5) Just Download from Market, there is another one called ARDroid but I could not get it working with AR Drone yet.
#6) First download this file "ADHOC.v2.zip " and then put this file on the root of your SD CARD . Once this is placed on the root of your SD CARD , open ROM MANAGER (make sure it`s running 2.5.1.3 or Green Text colour in Recovery) and click REBOOT INTO RECOVERY. Then INSTALL ZIP FROM SD CARD and choose this file ADHOC.v2.zip and flash it into your HTC. Once flashed turn on your AR DRONE and try to see it in the WIRELESS NETWORKS on your HTC , it should look something like this.
" (*)ardrone_XXXXXX "
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you see this then click to connect and wait for it to connect . Once connected you can disconnect BUT do not press FORGET THIS NETWORK , keep it in the memory of HTC.
IMPORTANT : Take a note of your AR DRONE`s network SSID , you will need it later on . Mine is 'ardrone_124923'
#7) Goto this link and download the latest .apk of WIFI TETHER or goto market and try to download it from market, I think Market does not have the latest one. Once downloaded the .apk, place it in the root of your SD CARD or DOWNLOAD folder, locate it and install it using "Astro"
Now Start the WIFI TETHER, then do the following
MENU > SETTINGS > CHANGE SETUP METHOD > into WEXT (adhoc)
MENU > SETTINGS > SSID > into "ardrone_XXXXXX" xxxxxx being your AR Drone`s number that you noted down a few lines above.
MENU > SETTINGS > CHANGE LAN > into 192.168.1.0/24
MENU > SETTINGS > Routing Fix > Must be ticked (I don`t know why but it works like that)
Now press BACK and goto "PRESS TO START TETHERING" and press the sign there
Then the SIGN turns into YELLOW meaning all is OK , if you encounter ERRORS on the screen , Turn OFF/ON the wireless Tether once more, if you still encounter errors then UNINSTALL and REINSTALL WIFI TEHTER. You can check to see if there are any errors from MENU > SHOW LOG
P.S. MAKE SURE YOU ALLOW ALL REQUESTS THAT SUPERUSER.APK IS ASKING PERMISSION FOR !!!
We are almost ready !!!!
When the WIFI TEHTER is on, meaning YELLOW , turn on the AR DRONE and wait for it`s lights to be all GREEN . Once all GREEN then goto AD.PRO or ARDrone Demo application and start the application , that`s it ..... (make sure the default IP address is 192.168.1.1 on your aplication)
For the future uses you only need to turn on WIFI TETHER and then turn on the AR DRONE once all lights are green then open your favorite AR DRONE application and fly away ....
Enjoy !!!

Hi!
Any chance you make a version for Nexus S (Gingerbread also...) ?
I've tried this with a laptop ad hoc network, my device finds it on the WIFI networks but can't connect to it.
I'm getting my AR.Drone in a couple of days so I'd love to know it's going to actually work

Hi
I don`t have a Nexus S , but I am almost sure this method MUST work on all android devices, just do exactly as I say and you should be OK.
You don`t need a Laptop to connect, just do exactly as I mentioned and should work....
BTW , are you rooted ?

doublecheese said:
Hi
I don`t have a Nexus S , but I am almost sure this method MUST work on all android devices, just do exactly as I say and you should be OK.
You don`t need a Laptop to connect, just do exactly as I mentioned and should work....
BTW , are you rooted ?
Click to expand...
Click to collapse
I'm rooted.
Got AR.Drone.
Tried your script on stock android 2.3.4, didn't work...
Flashed SupeAosp 8.2 and I didn't even have to use WiFi tether... just connected to the drone ad-hoc wifi network and ran the AR.Drone app.

[ROOT] Walton Primo S2 - Linux & Mac

Primo S2, one of latest Qualcomm chip powered phones from Walton Mobile, has been rooted with a few days of hair-pulling - and here is the procedure! [If you are using Micro$oft Windows, check this thread instead]
WARNING: Rooting will instantly void your phones Warranty.
Click to expand...
Click to collapse
Instructions
1. Download the rooting tools from here: https://www.mediafire.com/?csryy6ufouxxqnt
2. Extract the ZIP archive, and inside the archive, there are installer scripts for Linux and. Use the installer script according your your operating system.
3. If everything goes well, your phone will reboot. Now, Go to the play store and install the "SuperSU" app.
4. Open the app, and the app will ask you to "update your SU binary", Tap "Continue"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. Then, tap on "Normal".
6. Finally, it will ask you to Reboot your phone. Reboot your phone.
Congratulations! You have a rooted Primo S2!

tuxboy said:
Primo S2, one of latest Qualcomm chip powered phones from Walton Mobile, has been rooted with a few days of hair-pulling - and here is the procedure!
Instructions
1. Download the rooting tools from here: https://www.mediafire.com/?csryy6ufouxxqnt
2. Extract the ZIP archive, and inside the archive, there are installer scripts for Linux, Mac and Windows. Use the installer script according your your operating system. (Windows users double click on "install-windows", and make sure you have fastboot/adb drivers installed)
3. If everything goes well, your phone will reboot. Now, Go to the play store and install the "SuperSU" app.
4. Open the app, and the app will ask you to "update your SU binary", Tap "Continue"
View attachment 2672666
5. Then, tap on "Normal".
View attachment 2672677
6. Finally, it will ask you to Reboot your phone. Reboot your phone.
View attachment 2672678
Congratulations! You have a rooted Primo S2!
Click to expand...
Click to collapse
Thanks

tuxboy said:
Primo S2, one of latest Qualcomm chip powered phones from Walton Mobile, has been rooted with a few days of hair-pulling - and here is the procedure!
Instructions
1. Download the rooting tools from here: https://www.mediafire.com/?csryy6ufouxxqnt
2. Extract the ZIP archive, and inside the archive, there are installer scripts for Linux, Mac and Windows. Use the installer script according your your operating system. (Windows users double click on "install-windows", and make sure you have fastboot/adb drivers installed)
3. If everything goes well, your phone will reboot. Now, Go to the play store and install the "SuperSU" app.
4. Open the app, and the app will ask you to "update your SU binary", Tap "Continue"
View attachment 2672666
5. Then, tap on "Normal".
View attachment 2672677
6. Finally, it will ask you to Reboot your phone. Reboot your phone.
View attachment 2672678
Congratulations! You have a rooted Primo S2!
Click to expand...
Click to collapse
Yes Bro :laugh: you are the legend :good:
---------- Post added at 05:54 AM ---------- Previous post was at 05:33 AM ----------

GENIUS!!

Tutorial for the Windows People
If you guys are using Micro$oft Windows, please check this thread.

@tuxboy, do you know what device was s2 rebranded from?thanks in advance

shohag2018 said:
@tuxboy, do you know what device was s2 rebranded from?thanks in advance
Click to expand...
Click to collapse
I could map it's configuration to Allview V1 Viper S.

tuxboy said:
I could map it's configuration to Allview V1 Viper S.
Click to expand...
Click to collapse
there are a lot of fones that would resemble its specs.. its usually the build/design that denotes the ODM.. i guess rams/cameras/batteries are changed according to walton's order, not the exterior.
thanks for ur rply btw. cheers.

Capturing OTA Update URL For Noobs (No logcat required)

Capturing OTA Update URL For Noobs (No logcat required)
Hi guys this thread is for those people who want to capture the link for OTA Update but do not know how to read logcat. This is a very easy process i have made which involves root,xposed module...and 5 min (To get the link of the OTA ofcourse download is going to take time depending upon the length of the OTA update data.
Many people can't read logcat and get confused by it in this method you have to just press buttons only and nothing more....
Requirement-
-Rooted Device
-ADB Drivers
-Xposed Module
-Url Snooper (Windows Software)
-Reverse Tethering (Windows Software/Android Companion Apps)
-Little to no brains....:silly:
Note- If the ADB Driver Does Not work you need to find the driver which is compatible to your device online.
Links to the software makers-
-Xposed Module
-Reverse Tethering
-URL Snooper
The Links for the software and apps are in the attachment below-
I have broken the procedure into 6 post to help you understand better-
Press thanks if this helps

Install Computer Software
Follow the following procedure below to install URL Snooper and Winpcap-
1) Install URL Snooper
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2) After the installation you will notice another setup opens automatically which is the winpcap setup install that too-

Setting up the Device
Now you need to set up your device-
1) Make sure that your Device is rooted
2) Make sure your ADB is installed (If you don't know what adb is then check it online and also make sure that adb drivers are installed in you computer)
3) First install Xposed Framework (link Above)
4) Go into the app and tap the Framework button
5) Then tap the "Install/Update" button and reboot
5) Then install USB Tunnel and hack connect Service app
6) After that again go inside the Xposed Framework and click the module button and then tick mark the hack connect service app (Don't click on the icon only click on the checkbox on the side

Preparing URL Snooper
Now you need to prepare the settings of URL Snooper such that you can use it to capture the right URL-
1)Start url snooper (In start Menu)
2) Now Go to files tab and click advance such that the interface would look like this
3) Now in the protocol filter change the show multimedia to show all.
4) You will see a lot of URL Click on clear results and then make sure none of your software are useing internet (Check background processes like utorrent also) also make sure none of your app in device is using internet also

Activating Reverse Tethering app
Now you download the reverse Tethering v3.19.zip file and extract it this software helps to transfer your internet connection from your computer to your device-
1) Connect the data cable from the computer to the device
2) Extract the zip and press the androidtool exe file
3) After that check that in the select a device section you will have something like 0123456789ABCDEF so but something must be there if not you don't have adb driver or your adb driver is incompatible. ADB Driver Link
4) Press the connect button and a script execution window shall popup
5) After which it would look something like this
Now to check open a browser and type any page a it should load and also a graph shall come under the download meter of the android reverse tethering software. Note- When you minimizse this app it minimizses in the system tray

Capturing Update Link
Now it is finally the time to capture the URL of the OTA Update.zip-
1) Just to be sure Again clear the results in the URL Snooper Software
2) Go to the the Update Location (It is mostly located in Settings->About tablet->Check for new version software) and press the download button after which it might ask you if you want to download through WLAN pres continue anyway button
3) The download will start
4) In the URL Snooper you shall see a new link associated with the GET zip protocol copy the link and paste it somewhere safe the close everything and download the zip file ( You can cancel the download in the device now if you want) GOOD LUCK
Note-i have heard somewhere that download accelerator like idm sometimes corrupt the download so be carefull.

Bonus Function
This post has nothing to do with the capturing the update but since these software are awesome i would like you to know all the awesome function of the software-
URL SNOOPER- This software can be use to detect all the url that comes into the computer from any software in the computer thus it can be used to download vedios that you might be playing or songs.(Use Multimedia filter)
The main reason i use this software is to download offline installer files of program. (In an online windows installer the setup first downloads the offline installer quietly in the temporary files folder located in the C drive and then deletes the file after the installation is completed) Some softwares do not provide offline installers so this is a nice way to leech the exe file and store it.
REVERSE TETHERING- This software can be used to provide internet connection to your device from you computer (Its usefull when you have a fast internet port but no wifi modem) you can use this to update apps browser net etc.....etc
HOPE THIS METHOD WILL HELP EVERYONE AND ALSO WILL SOLVE THE PROBLEM OF FINDING OTA URL IN THE NET (IF YOU SEARCH ONLY NEXUS AND SAMSUNG URL ARE MOSTLY FOUND SINCE MOST OF THE DEVELOPMENT ARE PRESENT IN THAT DEVICE LINE)
PRESS THANKS IF THIS HELPS

Reserved
Reserved

Very useful.

Krystyna said:
Very useful.
Click to expand...
Click to collapse
Sorry could not finish will finish it today

Very long article
How you did this all
Really good work
I will try to concentrate and read it carefully
I just finished ..very good article and helpful

drabuaiad said:
Very long article
How you did this all
Really good work
I will try to concentrate and read it carefully
I just finished ..very good article and helpful
Click to expand...
Click to collapse
Its not complicated you just have to press the next button most of the time i thought picture are better than words (A single pic can speak a thousand words)
I made this especially for noobs
for screenshot i used greenshot an awesome screenshooting app:silly:

[ROM][PORT] MIUI 7 - For Gionee P3 Team TMTT [STABLE - GOBLA] [MT6582]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MIUI 7
DUAL SIM 3G WORKING​
Credit
Sim 3G Dual - Lenovo A328
Team TMTT Porting
HI , I From VIetnamSe ​
Features
1.SIM 2 3G WORKING. NOW ITS DUAL 3G - FIRST FOR MT6582
[Credits to Mr.deliopoulos-for making it & Mr.Ondipuli-for informing us about that patch]
2. Beautiful MIUI 7 - Muitilang
3. Online themes,wallpapers,ringtones,etc..
4. More Battery Efficient,Smooth
5. Extra Reboot Menu Mod
6. Modded dialer , settings , In Call UI and new File manager
7. Good Camera Quality
8. All Unwanted/chinese MIUI apps Removed
9. Play Store working
UI limitations/Issues
1. No DPI issue in default theme upto 204 dpi , but some themes will not work properly
Default dpi we put is 204 , you can change it from build.prop file
2. Due to themes and other effects , ram use is little high , but smooth also good battery backup too
Guide Flash Miui
Go to TWRP 2.8.7.0
>>TWRP 2.8.7.0<<
Wipe => Wipe Factory reset
Advanced => Check Davik Cache, Data, System, Cache => Wipe
Mount => Uncheck System
Install => Zip Miui 7.zip
Done
REboot phone and Waiting...
PORTED BY TEAM TMTT ​
MARIUS : http://forum.xda-developers.com/member.php?u=6895163
Thanh Ta : http://forum.xda-developers.com/member.php?u=6872538​
MIUI 5.11.26 Dual 3G Muitilang​
SYSTEM
Optimization - Merge partitions system Mi 2 / 2S (ROM Install fastboot with and wipe all you will be reconfigured the previous system partition) (11-20)
Fixed - Volume not adjusted using the key after turning on Do Not Disturb mode (11-26)
PHONEBOOK
New - Support for transferring money in page directory for those with account cards Mi Cloud (11-20)
MUSIC
Optimization - Stage grayed play white (11-24)
INSTALLATION
Fixed - No response when "Mi Wifi Router Management" in detail page Wifi (11-23)
Fixed - Application-level power consumption are sometimes not displayed (11-25)
FILE MANAGEMENT
Optimization - Optimize analytical data source for the image using Quick URL (11-23)
CLOCK / COMPUTER
Fixed - Sometimes the alarm clock to go off when a new a new alarm has been generated (11-25)
DOWNLOAD LINK
Mod Edit by @Darth : Links removed and thread closed for not complying with GPL.
*
*

Enabling 3G on SIM 2
1.Open the provided Dual sim control app and go to Data Connection tab
2.Press on "Set SIM 2 as 3G"
it'll now set your SIM 2 in "WCDMA Preferred" mode .Enjoy 3G on SIM 2.
If you want to set as "WCDMA Only" mode ,follow step 3,4&5
3.go to settings/about phone and tap 4 or 5 times on Internal Memory , it'll lead you to testing mode
4.From Testing , press Phone information2
5.You'll see "WCDMA Preferred" press it and change it to "WCDMA Only"
That's all
Enjoy 3G on SIM 2 and press thanks to US
some screenshots are provided below
THANKS TO GIONEE M2 TEAM ARGN

For downloading apps from playstore through mobile data you need to set data download limit to unlimited , otherwise it'll always shows "Waiting for WiFi"
So here's how to set it to unlimited
1.From tools folder ,open downloads
2.from its settings change size limit to unlimited
Now you can download anything fom playstore using your mobile data
Follow the below screenshots for easy understanding

How Swap Ram For Gionee P3
Extract
must Root
First on Busy Box Pro
Wait finished choose install
to root explorer
System / etc /
create folders named init.d
copy 2 files to set right Swap300_cache Swap300_system vs 777
finished in Universal Cantilever select Activate current Donethen select Verify = >> done Succes
Reboot finished
Pro checks to see Swap Diskinfo below oke
if Copy faild
SuperSU = > settings = > shortcut link name , reboot Done
Link Tools ( decompression is not Flash )
https://drive.google.com/file/d/0B5_r8gUSSTYaSTlBN2NjUFA4Q0U/view?usp=sharing

twrp link not working bro
Sent from my Micromax A310 using XDA Free mobile app
---------- Post added at 09:45 PM ---------- Previous post was at 09:44 PM ----------
i am on stock jelly bean, can i flash this rom?
Sent from my Micromax A310 using XDA Free mobile app