Sup guys.. first i want to tell you that im from Argentina and my english sucks. This is my first post and i really need you!! try to understand me
Well this morning i was updating my firmware but i dont remember what version i was updating.. ok my tablet was ready and the firmware too :good: my problem appears when i turned on my tab.. rarely my tab doesnt work and it starts directly in the system recovery.
when i select "reboot system now" my tab doesnt reboot at all..
when i select "wipe data/factory reset" it works but my tab still not works
Data of my screen:
Android system recovery <3e>
Volume up/down to move highlight;
power button to select.
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
#MANUAL MODE#
-- Appling Muti-CSC
Applied the CSC-code : XAR
Successfully applied multi-CSC.
can you guys help me?? please i need my tab because i work with this!! i got information and this is my only one instrument.
:crying::crying:
Maybe it's an update error and you're stucked at recovery . Try flashing a new firmware through odin or root it by using hemidall suite with the help of odin and after rooting install CWM and then flash a custom rom
Sent from my GT-P3100 using xda premium
openmatrix said:
Maybe it's an update error and you're stucked at recovery . Try flashing a new firmware through odin or root it by using hemidall suite with the help of odin and after rooting install CWM and then flash a custom rom
Sent from my GT-P3100 using xda premium
Click to expand...
Click to collapse
oh well i must say i dont understand absolutely nothing about odin and hemidall suite and cwm.. im so noob with this. can you explain me more sir? ty a lot and sorry about my silly experience
Okay go to this site and downloads Odin+ Android 4.1.2 P3100XXDMB1
http://au.ibtimes.com/articles/454904/20130409/official-samsung-4-1-2-jelly-bean.htm
You can follow those steps and if u didn't know anything just ask
Sent from my GT-P3100
i solved it!! just i wasted all of my battery then i started to charge it and my tab reborn like a fenix.
ty !!
jfedealvarez said:
i solved it!! just i wasted all of my battery then i started to charge it and my tab reborn like a fenix.
ty !!
Click to expand...
Click to collapse
Lol!!!
Congrats on your tab's rebirth
Sent from my C1505 using xda app-developers app
Need help with simmilar problem
Hello guys. I have similar problem. tab2 is literally looping between start screen that is asking for update and recovery. In recovery I tried from sd card to flash new rom or cwm but he is giving the same message: signature verification failed and he just restart and first screen is just asking for update and code. I instaled all drivers for samsung and tried on another comp but neider of them recognise tab so I don`t know if there is any help since I can not use odin and from sd he is just looping without solution. Please I am desperate. Sorry for English. Not my native language. Ido have some knowledge of rooting and working with odin but not with adb and now I am reading about it but also I see that even for that he needs drivers and recognition from pc. Please is there any option? Apreciate any help. Thanks
jfedealvarez said:
i solved it!! just i wasted all of my battery then i started to charge it and my tab reborn like a fenix.
ty !!
Click to expand...
Click to collapse
hey i have the same problem, tried your advice but it does not work as the tab does not stay on long enough to connect with my pc
I bought Samsung galaxy core last September
I successfully rooted the device using framaroot
But when I tried to install CWM recovery but had no luck with it
Please someone tell me how to install Cwm recovery
I tried the methods given by thecoreguy but still on stock recovery
I on firmware XXBMJ5
Affectionk587 said:
I bought Samsung galaxy core last September
I successfully rooted the device using framaroot
But when I tried to install CWM recovery but had no luck with it
Please someone tell me how to install Cwm recovery
I tried the methods given by thecoreguy but still on stock recovery
I on firmware XXBMJ5
Click to expand...
Click to collapse
As u mentioned, use 2nd method which is in tutorial of the core guys. There is chances that 1st time it dont work n u stuck in cwm. Then flash stock recovery via odin n repeate 2nd method again it should work. Coz it work for me. N dont reboot device in recovery using advance power off or restart menu.
Press thans if I help u
Sent from my GT-I8262 using XDA Premium 4 mobile app
Hi Guys, Im on 4.1.2. Revently i flash a 4.3 mod 4 rom via odin(this rom dont update bootloader) and stuck in boot animation. Then i re flash a 4.1.2 stock rom via odin.. but didnt boot.. then i tick erase nand all.. and then flash again 4.1 then some how i manage to reboot phone. But unfortunatly efs was missing and sent to repair.. now my phone works and have imei
That was background and i dont know it awas impact for this or not. After i recive my phone i got nand backup and now when ever i flash rom via recovery or odin always stuck in the boot animation(AOSP and stock) even tried to wipe data after flashing . At onece phone got boot as normal after flashing 4.1.2 stock and again there was no Imei.. tried everthing at efs pro and xda other thread information no use.. so i revert back to nandroid backup and everything works again. So guys im stuck in 4.1.2
, befor this happen i was able to flash galaxy project 4.3 , xtream 4.3 and and all other roms without problem.. and now i cant flash anything always stuck in boot animation and cant do anthing.. tried evrything full wipes and after flashing data wipes etc.. but no use.. even i cant flash odian stock roms.. it always stuck in bootanimation...im stuck to this nandroid backup please guys help me. I want to flash roms as i was before..
Sent from my GT-I9305 using xda app-developers app
Reboot to recovery, Wipe cache.
I did it no use...
What about sending it for repair again, then when it comes back do a nandroid restore of your data only (not system and other partitions), see whether that works.
Off topic: This should be in Q&A?
Sent from my GT-I9305 using Tapatalk
Oha im sry I got crzy because to this prob ill re write thread in q and a.
Sent from my GT-I9305 using xda app-developers app
Well I was in the same pickle
whicever 4.3 rom i flashed through odin i got stuck in boot logo
Also tried customs 4.3 roms stuck a boot logo
Here what flashed philz recovery + 4.1.2 rom
no imei
flashed persues kenerl network + imei back
Backed up everything
Using Philz recovery wipe data factory reset + wipe cache + dalvik cache
in mount and storage section formated everything
Used odin to flash a 4.3 stock package it worked
AMoizK said:
Well I was in the same pickle
whicever 4.3 rom i flashed through odin i got stuck in boot logo
Also tried customs 4.3 roms stuck a boot logo
Here what flashed philz recovery + 4.1.2 rom
no imei
flashed persues kenerl network + imei back
Backed up everything
Using Philz recovery wipe data factory reset + wipe cache + dalvik cache
in mount and storage section formated everything
Used odin to flash a 4.3 stock package it worked
Click to expand...
Click to collapse
Well I try this.. I was so upset because of this problem.. ill check and tell you mate.. did u also wipe internal sd ?
Sent from my GT-I9305 using xda app-developers app
AMoizK said:
Well I was in the same pickle
whicever 4.3 rom i flashed through odin i got stuck in boot logo
Also tried customs 4.3 roms stuck a boot logo
Here what flashed philz recovery + 4.1.2 rom
no imei
flashed persues kenerl network + imei back
Backed up everything
Using Philz recovery wipe data factory reset + wipe cache + dalvik cache
in mount and storage section formated everything
Used odin to flash a 4.3 stock package it worked
Click to expand...
Click to collapse
Man you are a hero thank you very much... now my phone working.... love you man....
Sent from my GT-I9305 using xda app-developers app
1Ishara said:
Man you are a hero thank you very much... now my phone working.... love you man....
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Took me a more then a month to solve this
AMoizK said:
Took me a more then a month to solve this
Click to expand...
Click to collapse
Yes bro I was very upset and I gave up every hope.. I thougt Ill stuck in 4.1... but you save me... thanks bro thanks lot... no words to say...
Sent from my GT-I9305 using xda app-developers app
Hi
Recently I've rooted my Samsung Galaxy SL i9003 with a Cyanogenmod 11 based ROM (Android firmware 4.4.2).
When I've caught up in a boot loop error, I went to recovery mode and instead of wiping data or a factory reset I've wiped cache !!
(by mistake or lack of awareness).
.
After that my phone is not booting up.. when I'm trying to turn on, it got stuck at the first screen which displays like
'Samsung Galaxy SL GT I9003'.
ROM : Cyanogenmod.
Android Version : 4.4.2
This is the first time I'm doing this kind of stuffs with the phone, So guys please please help me out to get over this..
-Arjun
ReFlash cm11 again and if that not help flash stock firmware with odin.
Enviado desde mi bq Aquaris 5 HD
Error while performing a hard reset on Samsung galaxy SL i9003
acuicultor said:
ReFlash cm11 again and if that not help flash stock firmware with odin.
Enviado desde mi bq Aquaris 5 HD
Click to expand...
Click to collapse
I flashed the phone with stock rom, i.e GB 2.3.6(I9003DDMF1) for SL i9003 with Odin3 V1.82. After flashing, the phone was trying to reboot, but its stuck some where and showing the animation continuously instead of moving into the language preference option.
I guess it may be a boot loop error and i went to recovery mode and tried to do a factory reset, but while resetting it shows some error..
after that i wiped the cache partition too..
Still the phone is in the same condition as mentioned above
So, should i need to flash stock rom once again, to resolve this issue ?
Thanks in advance
-Arjun
I think you have the same issue like me. Your internal memory is maybe broken.
Gesendet von meinem GT-I9001 mit Tapatalk
arjun_rg said:
I flashed the phone with stock rom, i.e GB 2.3.6(I9003DDMF1) for SL i9003 with Odin3 V1.82. After flashing, the phone was trying to reboot, but its stuck some where and showing the animation continuously instead of moving into the language preference option.
I guess it may be a boot loop error and i went to recovery mode and tried to do a factory reset, but while resetting it shows some error..
after that i wiped the cache partition too..
Still the phone is in the same condition as mentioned above
So, should i need to flash stock rom once again, to resolve this issue ?
Thanks in advance
-Arjun
Click to expand...
Click to collapse
You have to flash a Full firmware paqage(ddlf2,xxkpe) with pit and the other files included(modem,code,csc)
Enviado desde mi MID mediante Tapatalk
Thank you, This method really works.. !
acuicultor said:
You have to flash a Full firmware paqage(ddlf2,xxkpe) with pit and the other files included(modem,code,csc)
Enviado desde mi MID mediante Tapatalk
Click to expand...
Click to collapse
Thank you.. ! :good:
rboy28 said:
I think you have the same issue like me. Your internal memory is maybe broken.
Gesendet von meinem GT-I9001 mit Tapatalk
Click to expand...
Click to collapse
Thanks for your reply.. !
Actually what happened in my case was, I've lost some boot files due to an improper factory/data reset
and the same issue can only rectified by flashing these files PIT, PDA, Modem, CSC with OdinV1.85.
In some cases flashing with a single file(PDA Only) will not works at all.
Thanks
-Arjun.
learn a lot
Life is to Live & Learn.
Sent from my GT-I9003
So I have this Samsung Galaxy Tab 2 7.0, GT-P3100 with Jellybeans 4.1.2. I recently rooted it using Kingroot. It worked fine until I tried installing a custom kernel. I installed unofficial miui v5.4 using CVM Recovery v6.0.7 I think. I clicked install from sd card and installed the .zip file. It said installed after a few mind. I then clicked reboot device now. It started booting and showed a new boot image, which I thought was normal. But the image wasn't fitting in the screen. I waited full 30 mins and it stayed there, a light coming and going as a logo. Nothing happened, so I pressed the key combination of power button + volume up button for 5 seconds and it started again, showing the new symbol. It has not booted after an hour and half.
Please help, I don't know what to do.
I admit I am a little new in this. But I saw a website to tomsguide.com and followed the steps with pictures.
MeTheAwesomest said:
So I have this Samsung Galaxy Tab 2 7.0, GT-P3100 with Jellybeans 4.1.2. I recently rooted it using Kingroot. It worked fine until I tried installing a custom kernel. I installed unofficial miui v5.4 using CVM Recovery v6.0.7 I think. I clicked install from sd card and installed the .zip file. It said installed after a few mind. I then clicked reboot device now. It started booting and showed a new boot image, which I thought was normal. But the image wasn't fitting in the screen. I waited full 30 mins and it stayed there, a light coming and going as a logo. Nothing happened, so I pressed the key combination of power button + volume up button for 5 seconds and it started again, showing the new symbol. It has not booted after an hour and half.
Please help, I don't know what to do.
I admit I am a little new in this. But I saw a website to tomsguide.com and followed the steps with pictures.
Click to expand...
Click to collapse
So I think you flashed a incompatible Rom on your tab 2, well the only way to get it back booting is to try restoring it back to stock firmware, just Google how to restore tab 2 to stock, and follow the video on the channel droid cheats but yeah if you have got pretty fast internet and don't want to spend entire life downloading that 1GB file go the general discussion of the tab 2 7.0 forum here and scroll down you will find a thread named fast download link stock firmware I think it should be something like that and download the one made for p3100, want more help comment below
Sent from my GT-P3100 using Tapatalk
shsagnik said:
So I think you flashed a incompatible Rom on your tab 2, well the only way to get it back booting is to try restoring it back to stock firmware, just Google how to restore tab 2 to stock, and follow the video on the channel droid cheats but yeah if you have got pretty fast internet and don't want to spend entire life downloading that 1GB file go the general discussion of the tab 2 7.0 forum here and scroll down you will find a thread named fast download link stock firmware I think it should be something like that and download the one made for p3100, want more help comment below
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
The person who posted it on the site said "THIS IS ONLY FOR P3100! P3110 WILL BE RELEASED LATER BASED ON HOW THIS ONE TURNS OUT" and i have a P3100!
And also, my device is not booting! How will i restore to stock firmware? And, I did a nandroid backup and stored it on my PC. Does that mean i can either restore through the backup, or get my data after restore to stock firmware?
MeTheAwesomest said:
The person who posted it on the site said "THIS IS ONLY FOR P3100! P3110 WILL BE RELEASED LATER BASED ON HOW THIS ONE TURNS OUT" and i have a P3100!
And also, my device is not booting! How will i restore to stock firmware? And, I did a nandroid backup and stored it on my PC. Does that mean i can either restore through the backup, or get my data after restore to stock firmware?
Click to expand...
Click to collapse
So you mean you can't even boot to download mode?
Sent from my GT-P3100 using Tapatalk
shsagnik said:
So you mean you can't even boot to download mode?
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
It Literally stays STUCK at the new boot image! The engine heats up and stuff. It ran out of battery, and when i charged and turned it on, it was still just showing the boot image!
MeTheAwesomest said:
It Literally stays STUCK at the new boot image! The engine heats up and stuff. It ran out of battery, and when i charged and turned it on, it was still just showing the boot image!
Click to expand...
Click to collapse
Do you know how to enter download mode, switch on the tablet while holding volume down and power key, tell me if you can do that there's no need to see the new boot image for this
Sent from my GT-P3100 using Tapatalk
shsagnik said:
Do you know how to enter download mode, switch on the tablet while holding volume down and power key, tell me if you can do that there's no need to see the new boot image for this
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
It gives me a screen saying,
Warning!!
A custom OS can cause critical problems in phone and installed applications.
If you want to download a custom OS, press the volume up key.
Otherwise, press volume down to cancel.
So, shouldI press volume up?
MeTheAwesomest said:
It gives me a screen saying,
Warning!!
A custom OS can cause critical problems in phone and installed applications.
If you want to download a custom OS, press the volume up key.
Otherwise, press volume down to cancel.
So, shouldI press volume up?
Click to expand...
Click to collapse
First tell me have you watched tutorial on YouTube on how to restore the tablet to stock rom?
If no then watch this really well made video
https://youtu.be/7L-UCSKE3Xo
Sent from my GT-P3100 using Tapatalk
shsagnik said:
First tell me have you watched tutorial on YouTube on how to restore the tablet to stock rom?
If no then watch this really well made video
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
Thanks for the link. Also i had done a nandroid backup saved on my pc. Can i recover my data?
MeTheAwesomest said:
Thanks for the link. Also i had done a nandroid backup saved on my pc. Can i recover my data?
Click to expand...
Click to collapse
Of course you can do that
Install cwm using Odin or just Google how to do that on tab 2
Then place the nandroid backup on the cwm folder of tab
Then go to cwm using
Volume up and power button
Backup and restore and yeah just restore it
Any doubt, question or query?
Just post it below I will help you
Sent from my GT-P3100 using Tapatalk
shsagnik said:
Of course you can do that
Install cwm using Odin or just Google how to do that on tab 2
Then place the nandroid backup on the cwm folder of tab
Then go to cwm using
Volume up and power button
Backup and restore and yeah just restore it
Any doubt, question or query?
Just post it below I will help you
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
One small Question: Will my root come back if I restore my data?
MeTheAwesomest said:
One small Question: Will my root come back if I restore my data?
Click to expand...
Click to collapse
If you have made an full cwm backup including system partition then yeah your root will come back
Sent from my GT-P3100 using Tapatalk
shsagnik said:
If you have made an full cwm backup including system partition then yeah your root will come back
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
Can i just install my Backup when my device is in Download mode? If no, then why?
I just want to understand this. Thanks.
MeTheAwesomest said:
Can i just install my Backup when my device is in Download mode? If no, then why?
I just want to understand this. Thanks.
Click to expand...
Click to collapse
No you can't because Odin can only work with Tar.md5 files and using something else like zip files will cause trouble a lot of trouble and yeah sometimes I forgot to check xda so sorry for late reply by the way what's your age because you sound little bit childish
Sent from my GT-P3100 using Tapatalk
shsagnik said:
No you can't because Odin can only work with Tar.md5 files and using something else like zip files will cause trouble a lot of trouble and yeah sometimes I forgot to check xda so sorry for late reply by the way what's your age because you sound little bit childish
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
Yeah, well.
I'm one year before teen. 12.
MeTheAwesomest said:
Yeah, well.
I'm one year before teen. 12.
Click to expand...
Click to collapse
That's great that you are concerned about your devices and want to fix, I am 16 and even people of my age aren't able to fix their devices when they get it bricked
Sent from my GT-P3100 using Tapatalk
did you clear dalvik cache before flashing the kernel and rom?
:good:
MeTheAwesomest said:
So I have this Samsung Galaxy Tab 2 7.0, GT-P3100 with Jellybeans 4.1.2. I recently rooted it using Kingroot. It worked fine until I tried installing a custom kernel. I installed unofficial miui v5.4 using CVM Recovery v6.0.7 I think. I clicked install from sd card and installed the .zip file. It said installed after a few mind. I then clicked reboot device now. It started booting and showed a new boot image, which I thought was normal. But the image wasn't fitting in the screen. I waited full 30 mins and it stayed there, a light coming and going as a logo. Nothing happened, so I pressed the key combination of power button + volume up button for 5 seconds and it started again, showing the new symbol. It has not booted after an hour and half.
Please help, I don't know what to do.
I admit I am a little new in this. But I saw a website to tomsguide.com and followed the steps with pictures.
Click to expand...
Click to collapse
hello sir,
i know how to solve your problem.
the problem you are facing is a boot loop .i.e you get stuck in the boot logo
and your device never goes further.
the common reason is not clearing dalvik cache before flashing a new rom in recovery.
so now solve this problem follow these steps.
1. charge your device fully and go to recovery.
2. do the following-
do a factory data reset.
clear cache and go to advanced and clear dalvik cache.
now flash the kernel and rom and the gapps(if you have).
now reboot and see you will go through the boot logo .
HURRAY YOU HAVE SUCCESSFULLY FLASHED YOUR NEW ROM
NOTE: all the steps above are only to practice in CWM Recovery.
if you still have any problems let mw know.
thanks
Zte blade l said:
:good:
hello sir,
i know how to solve your problem.
the problem you are facing is a boot loop .i.e you get stuck in the boot logo
and your device never goes further.
the common reason is not clearing dalvik cache before flashing a new rom in recovery.
so now solve this problem follow these steps.
1. charge your device fully and go to recovery.
2. do the following-
do a factory data reset.
clear cache and go to advanced and clear dalvik cache.
now flash the kernel and rom and the gapps(if you have).
now reboot and see you will go through the boot logo .
HURRAY YOU HAVE SUCCESSFULLY FLASHED YOUR NEW ROM
NOTE: all the steps above are only to practice in CWM Recovery.
if you still have any problems let mw know.
thanks
Click to expand...
Click to collapse
Thanks, I figured out the problem. Now I am on CM12.1! Yay!
Could you please guide me to install a Custom ROM in my galaxy tab GT-P3100?
How do I flash recovery?
How do I root?
How do I install a Custom ROM?
Provide me the link to download required files.
Thanks in advance!!
Sent from my Sparkle V using Tapatalk
Hello guys.i wanna ask about my tab 2 stuck on firmware upgrade.i cant go to download mode.i have flash stock firmware.its success.but not boot .do anyone have any idea to fix this thing
Sent from my GT-N7000 using xda Forums PRO