Database Info

[ROOT][CARLIV RECOVERY] For XOLO Q1000S Turbo CPU Done

Hi Freinds
ROOT:-
*Download Rootq100s zip
*Extract it
*Click on run.bat
*Reeboot ....its rooted
Carliv Recovery :-
*Copy Recovery to root of internal storage
*Install Mobile Uncle from Play store
*Select Recovery Update From Storage
*Reboot To Recovery ........
to boot into recovery just switch off phone and power it on while pressing volume + key ..
Download Link for files:-
https://mega.co.nz/#!v4wSgCSA!dpYNXBoLtCaiSCUu-Y9L-1wX_WVZ8tJBmj-gu6pKhLw
Thanks to MASTER CARLIV For Great Recovery Project
IMPORTANT :- This is only for XOLO Q1000S model . its 1.5ghz T processor and single sim so please dont use it on normal Q1000 model . bith are different
MIUI ROM is Coming for this phone

Hi Dev,
Wanted to know, why there is no development for Q1000s ? it is because of specific hardware limitation ?

rbdudani said:
Hi Dev,
Wanted to know, why there is no development for Q1000s ? it is because of specific hardware limitation ?
Click to expand...
Click to collapse
unfortunately due to lack of developers

I think there should be another reason...
because of every new launched mobile many developers are launching Custom ROMs, but only for this model no one is working .. which strange ?

rbdudani said:
I think there should be another reason...
because of every new launched mobile many developers are launching Custom ROMs, but only for this model no one is working .. which strange ?
Click to expand...
Click to collapse
I don't think so
just very few people bought this cell
n on the other hand it has mediatek chipset which means hardly any custom ROMs as its a closed source project
and most importantly the other ROMs which u see on any mediatek chipset device is just themed stuff or I used xposed modules so u don't need a custom ROM just use xposed installer n modules
As d way I had done to my cell touchwiz launcher + xposed modules like xblast ,xhalomultiwindow ,gravitybox ,hkthememanager...

Download Link Not Working
Hi,
The download link for recovery is not working. I too have this phone (MT6589T) device and need a recovery. Could you please provide me this if it still works?
Thanks....
Javajohn said:
Hi Freinds
ROOT:-
*Download Rootq100s zip
*Extract it
*Click on run.bat
*Reeboot ....its rooted
Carliv Recovery :-
*Copy Recovery to root of internal storage
*Install Mobile Uncle from Play store
*Select Recovery Update From Storage
*Reboot To Recovery ........
to boot into recovery just switch off phone and power it on while pressing volume + key ..
Download Link for files:-
https://mega.co.nz/#!v4wSgCSA!dpYNXBoLtCaiSCUu-Y9L-1wX_WVZ8tJBmj-gu6pKhLw
Thanks to MASTER CARLIV For Great Recovery Project
IMPORTANT :- This is only for XOLO Q1000S model . its 1.5ghz T processor and single sim so please dont use it on normal Q1000 model . bith are different
MIUI ROM is Coming for this phone
Click to expand...
Click to collapse

[Recovery][GUIDE] CWM Touch and Non-Touch for all K-Touch W68 based mobile phones

Hello Guys
I present you Clockwork MOD recovery v6.0.3.6(Touch, compiled by me) and v6.0.3.4 for Karbonn A8(Non-Touch, modded by me to fix incorrect backup date issue and faster backups) (All devices which are similar to K-Touch W68 supported example : Symphony W68) mobile.
Warning : The touch version MAY not support other devices rather than Karbonn A8. You may try it but I would suggest go for non-touch version as it is universal
This guide I made is for rooting Karbonn A8. It will also support other phones as well
First before flashing recovery you need to root your device.
Code:
[SIZE="3"][COLOR="Red"][I]Warning : Rooting voids your warranty. I will not be responsible for any kind of damage to device or your SD card in case you brick your phone by being oversmart. If you have idea of what rooting and flashing is then continue at your own risk.[/I][/COLOR][/SIZE]
Download Karbonn A8 drivers here (other phone based on K-Touch W68 search for your drivers) : Karbon A8 drivers
Download Kingo Root and install it.
Enable USB Debugging mode in your Karbonn A8 via Developer Option in settings.
Open Kingo Root and connect your phone with your PC and follow on screen instructions.
Voila You're done rooting! Easy isn't it
Flashing recovery
Download your preferred recovery Touch CWM or Non-Touch CWM and place it on your SD card.
Download Rashr from Play Store or from HERE and install it.
Open it and wait for Superuser access panel to pop-up. Allow it and then you'll see the Rashr menu. Select flash recovery from there and migrate to SD card and select the recovery where you have downloaded and select flash.
Once recovery is flashed it will ask you to reboot into recovery, select yes and then you'll boot into recovery :laugh:
Now backup your data and enjoy flashing custom ROM's
Upcoming Project : TyRaNcY RoM for Karbonn A8 with all customization feautures.
Many thanks to Shimp208 for bearing with me and for guiding me for the process of developing CWM for my device!
I would also like to thank Mariotaku for providing me with the "graphics.c" file for fixing the color issue in my CWM
Consider donating me as I alone as a developer takes a lot of time and resources to get these things working, at time also leads to bricking of device.Buy me a beer if you can
OR Just hit Thanks button That won't cost you

[Q&A] Micromax Unite 2 Root and Custom Recovery

Q&A for Micromax Unite 2 Root and Custom Recovery
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:

Micromax Unite 2 lock screen app misbehaving after root
Sudeep Duhoon said:
Don't mix this guide with some other as i will not help in that case.
First of all, use read back to get rom dump (backup) as there is no stock rom available on net.
Go here and follow the guide.
Procedure:
1. Download and install drivers Driver_Auto_Installer_v1.1236.00.7z.
If not working try these too PDAnet_4150.rar.
Problem in installation?? Go here
2. Download and copy/move KingUser to your memory card. (Fix provided by sagarwep:op)
3. Download any kitkat recovery from here and place it in pc.
4. Open SP Flash tools and load this MT6582_Android_scatter.txt in it. (alternative download link of sp flash tools)
5. Click on 'recovery' in sp flash tools and select the downloaded Recovery .
6. Click Download in sp flash tools, remove the battery from phone and connect it to pc.
A green circle/download ok will confirm flashing.
7. Insert battery and press volume up+down+power on, then press volume up to select recovery.
Note: in ctr recovery you can swipe right to go forward and swipe back to go backward, use it to navigate, save volume buttons.
8. Tap on install from sd card and swipe right on screen to go forward, select Unite_2_4.4.2_Proper root......zip and say yes to flash.
9. Reboot, Done.
In case any one wants working MTK droid tools, here or here
Please subscribe, rate and like this thread.
Any problem, ask in fb group or pm me on facebook.
Click to expand...
Click to collapse
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I've rooted my Micromax Unite 2 as per your root guide line, just after finishing root my lock screen app started misbehaving. after I restart my phone it first shows me the launcher and then after approx 20-30 seconds it shows lock screen. also I see an error message every time it boots which says that the process "system" is not responding -> kill or wait, choosing kill restores the normal phone function until next restart. restoring my backup of stock rom fixes the problem. could you please guide me how to solve this problem?

Not working
I did every single step correctly but idk why its showing no root access on my unite2 ...
then i tried rooting through mtk droid tools n im getting this error
ERROR:file abdb not install
the file isn't chosen
PLEASEEE HELP ... what to do

recovery mode problem
hey,
i have downgraded my micromax a106 to jeallybean of myphone aqua rio lite. now my recovery mode option is not working. on choosing recovery mode phone doesn't entering to recovery mode and it is booting to desktop. my phone is rooted. please help how to fix this

mmx unite 2 sd card mount/detect issue
Have recently bought micromax unite A106 june 2014 through flipkart. unable to detect/ mount external sd card .
tried with different sd cards which are working well in other phones.
Kindly help !!

Rooting Micromax unite 2- Problems
Hi Sudeep Duhoon,
I tried to root the Micromax Unite 2 using the software you have listed and followed the process to the T using the CTR 2..2 as recovery of choice.
1 When i try to activate the Root Explorer option on it gives me message"Sorry Test Failed, This feature can not run on your device"
2 When I connectbot i still get the $ sign in root
Please help.
Sadanand

Micromax Unite 2 Root and Custom Recover
Hi Sudeep ,
I had use the Tools and Rom given you to Root my Micromax Unite 2 . I had followed all the processes as shown.
Later on today When I tried to install Titanium It asked for SU Permission and It failed to get access and further message is its not rooted.
please help......

Use King Root ... 100 % success
Sent from my Micromax A106 using xda app-developers app

micromax unite 2 root
sir im unable to root my micromax unite 2. sp flash tools shows nothing n phone shows nothing but pc recognizes my device. developer is on plz help me

I want to upgrade to kit kat from jelly bean (mmx a106), but want to have flip to mute functionality of jelly bean
Can anyone guide me step by step for above 2 questions please
Sent from my Micromax Unite 2 using XDA Free mobile app

No command screen
I am using micromax unite 2
when i go to recovery mode i can see a no command screen... whenever i do something. any solution?

Recover Not Working Micromax Unite 2 After Flashing Stock Rom Of Android One?????
I have flashed rom of Micromax Canvas A1 on my Micromax Unite 2 By useing SP Flash tools. I thought it will work since both has almosh same specification (MTK 6582). And I will get new version of android on my Micromax Unite 2. Now my phone is not working. It is not even detected by SP flash tools. Otherwise i would have flashed the stock rom of my phone on it to make it work. Please help me with some guite by which i can recover my device.

Rooting Issue
Steps that i followed to Root my device:
1. Successfully created a Readback of my Custom Rom.
2. Flashed Carliv Touch Recovery(CTR) 2.2 for Kitkat.
3. Got into Recovery mode.. Installed zip from SD, and Rebooted.
4. Booted without any error.
5. Superuser application displayed in the launcher.
6. Opened Superuser to check settings(like unroot, permissions), and got worried it does not have any option to unroot.
7. Installed "Root Checker basic" to Check for root. When Tested it said " The device is not Rooted."(That's unexpected.) Tried other apps that require Root Access. Same message, Device not Rooted.
8. Then Download SuperSu.zip from searching from Google and placed it inside SD.
9. Booted to recovery, flashed SuperSu zip. then rebooted.
10. Finally my device got Rooted but was not able to remove the bloatware from the Phone. So Without wasting any time did the full unroot and posting these Steps.
My Question to anyone reading this post and who can answer these.
1. The "SuperUser" is not working due to CTR or the "Superuser" app is not able to root my device.
2. Has anyone rooted his/her Micromax Unite 2 recently?
3. If yes by which recovery, superuser app, xda post, or outside xda,google, youtube?

HELP PLZ
pmt changed for the rom it must be downloaded
what to do now plz help me guys

tjjain said:
pmt changed for the rom it must be downloaded
what to do now plz help me guys
Click to expand...
Click to collapse
Presuming you are referring to error in sp flash tool while flashing :
1)If you are flashing same Rom (jb to jb or kk to kk) then that means the partitions are changed, if you have changed ebrs then restore them first, then the error will go
2)if you are flashing jb to kk or kk to jb then use format all & download option.
---------- Post added at 12:12 PM ---------- Previous post was at 11:42 AM ----------
Sumit Mandal said:
Steps that i followed to Root my device:
1. Successfully created a Readback of my Custom Rom.
2. Flashed Carliv Touch Recovery(CTR) 2.2 for Kitkat.
3. Got into Recovery mode.. Installed zip from SD, and Rebooted.
4. Booted without any error.
5. Superuser application displayed in the launcher.
6. Opened Superuser to check settings(like unroot, permissions), and got worried it does not have any option to unroot.
7. Installed "Root Checker basic" to Check for root. When Tested it said " The device is not Rooted."(That's unexpected.) Tried other apps that require Root Access. Same message, Device not Rooted.
8. Then Download SuperSu.zip from searching from Google and placed it inside SD.
9. Booted to recovery, flashed SuperSu zip. then rebooted.
10. Finally my device got Rooted but was not able to remove the bloatware from the Phone. So Without wasting any time did the full unroot and posting these Steps.
My Question to anyone reading this post and who can answer these.
1. The "SuperUser" is not working due to CTR or the "Superuser" app is not able to root my device.
2. Has anyone rooted his/her Micromax Unite 2 recently?
3. If yes by which recovery, superuser app, xda post, or outside xda,google, youtube?
Click to expand...
Click to collapse
Use any custom recovery and flash koushik datta's superuser zip for rooting (he is the founder of cwm) to root your a106

tjjain said:
pmt changed for the rom it must be downloaded
what to do now plz help me guys
Click to expand...
Click to collapse
Thnks sir now my device is successfully rooted

Root Micromax Canvas 4
In the 5th step you said :
5. Select any path to save file and click ok, write 0x3E180000 in length and click ok.
But I have to backup my Micromax Canvas 4 [ A210 ]. What numbers should I enter there ?
Please tell me asap. Or any other link or post about Canvas 4 [ A210 ]
Thanks in advance.

this error is coming bro
PMT changed for the ROM; it must be downloaded

Rooting Micromax Unite 2
Hello Guys I followed Sudeep Duhoon and was successfull in installing TWRP custom Recovery and flashing superuser [it installed as system app and I wonder how to remove it now!!!], but still my phone doesn't seem rooted as Root Checker app says "This device doesnt have proper root access". I want to root this anyway please help.

No emmc backup
Hello. I have a wiko bloom (same phone as micromax unite 2 and myphonerio lite), I have flashed TWRP on kitkat, I couldn´t use the scatter file provided in the post so I used the one that I had from my phone. Once I flashed the recovery, I tried to backup my phone, but I have an error saying Error: couldn´t mount /emmc
I have looked for that folder with root explorer but there is no /eemc folder but some files intead (like [email protected], [email protected])
Before trying anything by myself I would like to know it there is any way to fix that. I would like to install roms and that things but I´m not sure they would work if the architecture of the software is not the same :/
TThank you in advance

Lenovo A6000 Stock Firmware

Am currently needed stock Lenovo A6000 firmware.Since its new in India I can't find stock rom for the Lenovo A6000.
Any help will be appreciated.
Thankyou

shhhibu said:
Am currently needed stock Lenovo A6000 firmware.Since its new in India I can't find stock rom for the Lenovo A6000.
Any help will be appreciated.
Thankyou
Click to expand...
Click to collapse
what is wrong with your phone?
do not have stock rom but do have latest MIUI v6 ported to this phone

smokin901 said:
what is wrong with your phone?
do not have stock rom but do have latest MIUI v6 ported to this phone
Click to expand...
Click to collapse
I just rooted and installed CWM,after rooting I cant update through OTA.
I also accidently deleted the stock nandroid backup,so am currently needed stock rom to revert to stock .

PM me please.

How to temporarily boot into cwm (clockworkmod recovery) and backup
IM NEW TO XDA HI GUYS I HORE THIS HELPS ..
ON MY NEXT THREAD ILL UPLOAD STOCK BACKUP OF MINE
Lenovo A6000 was launched last month i.e., January and it is exclusively available on Flipkart with a price tag of Rs.6999. This device comes with some good specification at this price, which includes 5 inch HD display with 1280 x 720 pixels resolution, 1.2 GHz Qualcomm Snapdragon 410 MSM8916 Quad Core 64-bit processor, 1GB RAM, Adreno 306 GPU, 8GB internal storage with 32GB expansion slot, 8MP rear shooter and 2MP front facing camera. It is a Dual SIM mobile with 4G LTE support.
Install CWM Recovery and Root Lenovo A6000
Those who have this device and looking to get most out of it by rooting it and installing Custom Recovery like CWM Recovery, then this guide is for you, as we will show you how to install CWM Recovery and Root Lenovo A6000 in this tutorial.
Before you actually proceed to install CWM Recovery and Root Lenovo A6000, you must follow the below listed Pre-Requisites to prepare Lenovo A6000 for the installation and rooting process and also to avoid interruptions in between process.
Pre-Requisites:
Backup all of your important data, though rooting won’t erase any data, having a backup is always safe. To back up your data follow our backup guides:
Backup and Restore SMS
Backup and Restore Contacts
Backup and Restore Call Logs
Enable USB Debugging on your device from Settings > Developer Options > USB Debugging.
If Developer Options is not located under settings then enable it by going to Settings > About Phone > Device Info and tap on Build Number for about 7-8 times.
Charge your device to at least 75%, before you proceed, so as to make sure the device won’t shut down in between the process, otherwise it may brick your device.
Go to Settings > Security and enable Unknown Sources option.
Download and install the Lenovo USB Drivers on your PC.
Setup ADB and Fastboot drivers on your PC from here.
Once you are all set with the above requisites, you can proceed to install CWM Recovery on Lenovo A6000. Once you have installed CWM Recovery you can proceed to Root Lenovo A6000.
DISCLAIMER
We should not be held liable or responsible in any manner for any damage occurred to Lenovo A6000. So understand the risk in installing CMW Recovery and Rooting Lenovo A6000, and proceed at your own risk.
Downloads:
CWM Recovery... IN IMAGE
Rooting Package...IN IMAGE
Copy the Rooting Package to your device’s SD card. Make sure to copy at the root of SD card, but not inside any folder.
Copy the downloaded recovery.img file to C:\Program Files (x86)\Minimal ADB and Fastboot or C:\Program Files\Minimal ADB and Fastboot directory.
Now connect your device to PC using OEM cable.
Open the C:\Program Files (x86)\Minimal ADB and Fastboot directory and press and hold shift key and right click anywhere inside the folder at the empty space and choose open command window here.
Now in CMD type:
adb devices
If any device id or devices are shown in the above command then it represents that your device is connected successfully to PC.
Now type :
adb reboot Bootloader
This will reboot your device into Bootloader / Fastboot Mode.
Now type:
fastboot boot recovery.img
Then after it boots to recovery select backup
and then flash root su zip and reboot .. its optional
and if u want ota u can restore system using cwm again by following above steps
i tell u to boot directly cos u can go to stock recovery anytime and get ota..
the ota Checks rcovery too thats y
press thanks if i helpeD

Anyone on

Arvind Balaji said:
IM NEW TO XDA HI GUYS I HORE THIS HELPS ..
ON MY NEXT THREAD ILL UPLOAD STOCK BACKUP OF MINE
Lenovo A6000 was launched last month i.e., January and it is exclusively available on Flipkart with a price tag of Rs.6999. This device comes with some good specification at this price, which includes 5 inch HD display with 1280 x 720 pixels resolution, 1.2 GHz Qualcomm Snapdragon 410 MSM8916 Quad Core 64-bit processor, 1GB RAM, Adreno 306 GPU, 8GB internal storage with 32GB expansion slot, 8MP rear shooter and 2MP front facing camera. It is a Dual SIM mobile with 4G LTE support.
Install CWM Recovery and Root Lenovo A6000
Those who have this device and looking to get most out of it by rooting it and installing Custom Recovery like CWM Recovery, then this guide is for you, as we will show you how to install CWM Recovery and Root Lenovo A6000 in this tutorial.
Before you actually proceed to install CWM Recovery and Root Lenovo A6000, you must follow the below listed Pre-Requisites to prepare Lenovo A6000 for the installation and rooting process and also to avoid interruptions in between process.
Pre-Requisites:
Backup all of your important data, though rooting won’t erase any data, having a backup is always safe. To back up your data follow our backup guides:
Backup and Restore SMS
Backup and Restore Contacts
Backup and Restore Call Logs
Enable USB Debugging on your device from Settings > Developer Options > USB Debugging.
If Developer Options is not located under settings then enable it by going to Settings > About Phone > Device Info and tap on Build Number for about 7-8 times.
Charge your device to at least 75%, before you proceed, so as to make sure the device won’t shut down in between the process, otherwise it may brick your device.
Go to Settings > Security and enable Unknown Sources option.
Download and install the Lenovo USB Drivers on your PC.
Setup ADB and Fastboot drivers on your PC from here.
Once you are all set with the above requisites, you can proceed to install CWM Recovery on Lenovo A6000. Once you have installed CWM Recovery you can proceed to Root Lenovo A6000.
DISCLAIMER
We should not be held liable or responsible in any manner for any damage occurred to Lenovo A6000. So understand the risk in installing CMW Recovery and Rooting Lenovo A6000, and proceed at your own risk.
Downloads:
CWM Recovery... IN IMAGE
Rooting Package...IN IMAGE
Copy the Rooting Package to your device’s SD card. Make sure to copy at the root of SD card, but not inside any folder.
Copy the downloaded recovery.img file to C:\Program Files (x86)\Minimal ADB and Fastboot or C:\Program Files\Minimal ADB and Fastboot directory.
Now connect your device to PC using OEM cable.
Open the C:\Program Files (x86)\Minimal ADB and Fastboot directory and press and hold shift key and right click anywhere inside the folder at the empty space and choose open command window here.
Now in CMD type:
adb devices
If any device id or devices are shown in the above command then it represents that your device is connected successfully to PC.
Now type :
adb reboot Bootloader
This will reboot your device into Bootloader / Fastboot Mode.
Now type:
fastboot boot recovery.img
Then after it boots to recovery select backup
and then flash root su zip and reboot .. its optional
and if u want ota u can restore system using cwm again by following above steps
i tell u to boot directly cos u can go to stock recovery anytime and get ota..
the ota Checks rcovery too thats y
press thanks if i helpeD
Click to expand...
Click to collapse
Thanks

Krystyna said:
Thanks
Click to expand...
Click to collapse
Np
Subscribe to my other thread
I'm gonna upload the backup

http://forum.xda-developers.com/che...-stock-rom-t3053436/post59409625#post59409625...
Cmon and visit here...
Uploaded..
And I need someone tio mirror it (the backup)

Cmon here for cm 12
http://forum.xda-developers.com/showthread.php?t=3066218
Lenovo a6000 cm12 alpha

problem in lenovo A6000 pls Help
Hello Everyone.
I've Rooted My Lenovo A6000 using ADB.
I was converting an app as system app using TianiumBackup.
Suddenly phone switched off in between the process.
Now its not switching on and showing only first white screen Having Labeled as "Lenovo"..."Powered by Android"..
if i go to recovery menu.. only 4 options showing...
---reboot system now
---apply update from ADB
---wipe data/factory reset
---wipe cache partition
---apply update from sdcard..
i've done wipedata and wipe cache... still its not starting from reboot..
i dnt have ROM Of lenovo A6000... i tried to install Cyanogen Mod ROM from Option apply update from sdcard ...
the process not completes and gives error saying---
"E: footer is wrong"
"E:signature varification failed...installation aborted"
i dnt know whether my phone bricked or not...
please Help ME???

Well dont panic. Get phils recovery img first.. Then get into bootloader mode by volume down + power.
In adb
fastboot boot twrp.img
In twrp wipe cache n data and install the cm.zip

Well don't anyone want advanced twrp???
****!!
I worked for nothing?? Go here

please give me this version or above stock rom Kraft-A6000_S033_150402_WCDB
Arvind Balaji said:
Anyone on
Click to expand...
Click to collapse
please give me this version or above stock rom Kraft-A6000_S033_150402_WCDB
My email id [email protected]
during the software update my phone strucked at this version...Please help me bro..Please give me direct file((edited)) link..
Plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz

venkatesh86210 said:
please give me this version or above stock rom Kraft-A6000_S033_150402_WCDB
My email id [email protected]
during the software update my phone strucked at this version...Please help me bro..Please give me direct file((edited)) link..
Plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
Click to expand...
Click to collapse
Download the s032 I uploaded.. Here It is the full ROM flash it through custom recovery and directly update to s037..
I dont have that update zip.. Sorry

Hey Balaji I'm unable to get OTA updates bcoz I've rooted my Android with kingroot app. And then unrooted my phone thru the same app but it has replaces some files of ROM.... Now it downloads updates but when I hit install it says ..... Some files missing and .... Updates aborted ..... N then these 4-5 options appear... Reboot now....apply update from sdcard etc.....
What do I do to fix this?
I've rooted this thru CWM also before bt taken recovery of phone after I did root with kingroot app..... I don't have stock ROM....
Sent from my Lenovo A6000 using XDA Free mobile app

pankajy said:
Hey Balaji I'm unable to get OTA updates bcoz I've rooted my Android with kingroot app. And then unrooted my phone thru the same app but it has replaces some files of ROM.... Now it downloads updates but when I hit install it says ..... Some files missing and .... Updates aborted ..... N then these 4-5 options appear... Reboot now....apply update from sdcard etc.....
What do I do to fix this?
I've rooted this thru CWM also before bt taken recovery of phone after I did root with kingroot app..... I don't have stock ROM....
Sent from my Lenovo A6000 using XDA Free mobile app
Click to expand...
Click to collapse
Go to my blog here and download stock ROM zip file... And then...wipe cache dalvik and data.. System too
Flash it with cwm ... Then reboot
You don't have any other choice.. But doing this will fix the issue.. ( I mean.. U will get updates.. )

Ndr90 said:
Hello Everyone.
I've Rooted My Lenovo A6000 using ADB.
I was converting an app as system app using TianiumBackup.
Suddenly phone switched off in between the process.
Now its not switching on and showing only first white screen Having Labeled as "Lenovo"..."Powered by Android"..
if i go to recovery menu.. only 4 options showing...
---reboot system now
---apply update from ADB
---wipe data/factory reset
---wipe cache partition
---apply update from sdcard..
i've done wipedata and wipe cache... still its not starting from reboot..
i dnt have ROM Of lenovo A6000... i tried to install Cyanogen Mod ROM from Option apply update from sdcard ...
the process not completes and gives error saying---
"E: footer is wrong"
"E:signature varification failed...installation aborted"
i dnt know whether my phone bricked or not...
please Help ME???
Click to expand...
Click to collapse
What worked for me - i had bricked my phone, did a full wipe without any backup
Basically had to "push" through ADB and get a grip on the device.
1. ADB operations - my phone was recognized as an android device connected to the USB but didn't appear under adb devices
2. I followed some operations to basically start recognizing it as my Lenovo A6000
The advice I got was from "Unbrick lenovo a6000 plus (also lenovo a6000 )" by tink2hakk (a lot of thanks to him)
"most of the people facing the problem : (Bricked lenovo a6000/plus )
Device not showing in adb i'm i right ?
if yes follow the following things:
1) install minimal adb and fastboot
2) install lenovo driver
3)install lenovo smart assistent
Now connect your phone to pc/laptop and pen minimal adb (py_cmd ) as administrator
now enter the following command :
adb shell
(now your device will not be listed )
Now enter the following command :
fastboot boot recovery.img
now you get thing like <waiting for device >
NOw remove battery and keep and now go to fastboot mode smile emoticon done your device will be listed and recovery will be flashed and now your device is ready to install custom rom smile emoticon try and give feedback if it works if it works subscribe to my youtube channel youtube.com/user/thevinayvinu "

[MT6580] [Kernel 3.18.19] Leagoo OS - Symphony i10

Disclaimer:
By flashing a custom rom, your warranty is void.
I am not responsible for bricked devices. You are choosing to make these modifications.
I will not give support for any modifications, frameworks and apps you install.
I will not give support, if you did not follow flash instructions 'word by word'.
Click to expand...
Click to collapse
Notable Feature :
Xpossed Firmware Support
Background Apps Working
Themed SystemUI
Known Bug:
*Front Camera Flash Not Supporting*
*Blur Not Support During Camera Focus*
*Not Working Smart Awake*
*Problem in Downloading From Playstore*
Requirements:
1. Symphony i10 Device
2. TWRP Recovery
3. Leagoo OS For Symphony i10
4. Little Brain.
How to Install:
Step 1. To get started you need a TWRP recovery. Here is the guide to root Symphony i10 and Install TWRP. If you already done that, then leave this step and follow the step 2.
Step 2. Download Leagoo OS For i10 zip file here and save the file on your phone’s internal memory
Step 3 : Download SuperSU V2.76 and keep in internal memory.
Step 4. Once all Zip files are saved on your phone. Boot your i10 into TWRP Recovery Mode. To do this Turn off your phone and Turn on the phone while holding Power and Volume UP buttons.
Step 5. From the TWRP recovery main menu, Go to Wipe and select "Data", "System", "dalvik" and "Cache". Now Swipe to Wipe, This will wipe your ROM System.
Step 6. Now go back to main menu of recovery and go to Install and find the zip files you saved on your Symphony i10 Internal memory.
Step 7. From here, Select the Leagoo OS For i10 zip file that you downloaded on step 2, after that select Add more zips option and select SuperSU > Swipe to flash.
Step 8. Wait for the flash to finish and press Wipe Cache & Dalvik.
Step 9. Press Back and press Reboot System. First boot will take some time, wait for 10-15 minutes to apply the CM 13 update on your phone.
Credits:
*Hasin Rayan ZIdni (For i10)*
*Kbd Md Rasel (For GH6)*

buddy could u please port a recovery to my device "intex cloud q11"
device specs
KERNEL 3.18.19+
mediatek mt6580
android 6.0
display 5.5 inch hd
resolution 720x1280
.
i can't port it via easy magic twrp maker coz it asks root permissions and i cant root my device [intex cloud q11].
i ve been trying to root my device, but i cant root it.
i ve tried almost every rooting tools both pc and droid and even mtkdroidtools.
but neither of them worked.
can u just port this recovery to my device.
i'll send u the stock boot.img and recovery.img of my device.
please.
i'd do anything in return for u. please.
please please please please.

dj4v1n45h said:
buddy could u please port a recovery to my device "intex cloud q11"
device specs
KERNEL 3.18.19+
mediatek mt6580
android 6.0
display 5.5 inch hd
resolution 720x1280
.
i can't port it via easy magic twrp maker coz it asks root permissions and i cant root my device [intex cloud q11].
i ve been trying to root my device, but i cant root it.
i ve tried almost every rooting tools both pc and droid and even mtkdroidtools.
but neither of them worked.
can u just port this recovery to my device.
i'll send u the stock boot.img and recovery.img of my device.
please.
i'd do anything in return for u. please.
please please please please.
Click to expand...
Click to collapse
inbox me ur boot.img or recovery

Zidni said:
inbox me ur boot.img or recovery
Click to expand...
Click to collapse
hey buddy. no thanks.
i ve made it. ported twrp without a bug.
thanks btw.

Touch not worked in Twrp
How to fixed touch not working in symphony v75??