Hello everyone! I have Sony Xperia Z3 D6603 23.0.1.A.5.77 and I'm trying to root my phone. When i try to flash 23.0.A.2.93 version with Flashtool I got an error saying that I'm missing drivers for my device and that I can find them in flashtool folder. When i try to install those drivers (v1.8) I got another error saying that some drivers failed to install.
This drivers failed to install.
Google Inc (Win USB) AndroidUsbDeviceClass Install Fail
Sony Ericsson Mobile Communications (ggsemc) USB Install Fail
Sony Net
I need those flashtool drivers but i dont know how to find them. Any help with that?
Thank you in advance!
If you are using Windows 8/8.1, you need to disable driver signature verification in Windows before you attempt to install the flashtool drivers.
chml17l said:
If you are using Windows 8/8.1, you need to disable driver signature verification in Windows before you attempt to install the flashtool drivers.
Click to expand...
Click to collapse
This worked, thank you so much!
One more question, I'm trying to install cyanogenmod 12 but when i press install in recovery i got error. Do i have to unlock bootloader? (probably yes)
dexter0137 said:
This worked, thank you so much!
One more question, I'm trying to install cyanogenmod 12 but when i press install in recovery i got error. Do i have to unlock bootloader? (probably yes)
Click to expand...
Click to collapse
Of course you do
Thank you guys
For future reference, you can install the drivers without turning off driver signatures by following the instructions here: http://www.usoftsmartphone.com/t237714.html
Guys Please Help When I Was Using Sp Flash Tool I Click "Format All" And Now My Cell is not going to be charge and switch on please help me any member any body i have mt6575 device china android phone Model Coca Z1 Firmware due to corrupt firmware my downloading stops at 56% then sp flash tool give many errors now please help that how i can install bootloader in my android device again. my pc is not supporting that phone by connecting through usb cable even i have downloaded many corrected drivers and also installed when i was using sp flash tool it was working but after format all i ost my boot loader.:crying::crying::crying::crying::crying::crying::crying::crying::crying:
Maka Saucedo:
Hii, i need help to instal the drivers for Sony xz
My computer dont install the drivers and dont read my phone in fastboot mode
Its Mark and error While installing the drivers, i dont know why
Post a screenshot of the error
Hi
I have nokia 2.4 ta-1270
Its didnot work but when plug usb to pc it read it mtk
Im trying to flash firmware but sp flash tool error
Auth file needed
Any one can help ?
Hi everyone, I tried to flash a patched Magisk boot image on my Ulefone Armor 8 Pro via fastboot but the device is now stuck in bootloop. I have already read some threads about trying to flash the stock firmware using the proprietary SP Flash Tool, but the phone doesn't remain in download mode for more than a few seconds. I can't even boot in recovery/fastboot mode again to try to flash the stock boot image since the phone just keeps rebooting. If someone could give me a hint it would be really appreciated.
stwm25 said:
Hi everyone, I tried to flash a patched Magisk boot image on my Ulefone Armor 8 Pro via fastboot but the device is now stuck in bootloop. I have already read some threads about trying to flash the stock firmware using the proprietary SP Flash Tool, but the phone doesn't remain in download mode for more than a few seconds. I can't even boot in recovery/fastboot mode again to try to flash the stock boot image since the phone just keeps rebooting. If someone could give me a hint it would be really appreciated.
Click to expand...
Click to collapse
You need write the model of device.
Currently I know of 3 models: 4GB RAM(Armor 8); 6&8GB RAM(Armor 8 Pro).
So with the correct stock ROM you can flash the device.
To use SPFT you need to specify which OS you have: Linux; Win7_8_10; other
This is to know if you actually installed the USB MTK drivers correctly and if further action is needed.
Also, write if you have the device with the bootloader locked or unlocked.
I have the 6GB RAM and have downloaded a time ago the GQ3090RH3_KSX70H_Ulefone_20210902_V01(Non-EU).zip file aka stock ROM. That's aka Non_EEA model. In the Ulefone site have SP_MDT_exe_v3.2048.02.00(Client).zip aka flash tool.
You used that tool?
Thanks for the reply. I have the model with 6GB of RAM as well and I am currently trying to recover my phone by using Windows 11 in a virtual machine. The bootloader is unlocked and I tried to flash the EU version of the stock ROM (GQ3090RH3_KSX70H_Ulefone_EEA_20210902_V01(EU).zip) by using SP_MDT_exe_v3.2048.02.00(Client).zip (after installing the required drivers), but as I have already specified I can't boot in download mode for more than a few seconds. My computer recognises the device as "MediaTek MT65xx Preloader" but the phone immediately reboots and I am not able to flash the stock ROM.
stwm25 said:
Thanks for the reply. I have the model with 6GB of RAM as well and I am currently trying to recover my phone by using Windows 11 in a virtual machine. The bootloader is unlocked and I tried to flash the EU version of the stock ROM (GQ3090RH3_KSX70H_Ulefone_EEA_20210902_V01(EU).zip) by using SP_MDT_exe_v3.2048.02.00(Client).zip (after installing the required drivers), but as I have already specified I can't boot in download mode for more than a few seconds. My computer recognises the device as "MediaTek MT65xx Preloader" but the phone immediately reboots and I am not able to flash the stock ROM.
Click to expand...
Click to collapse
Win11 is not good to use SP tool.
Maybe using Win10?!
"MediaTek MT65xx Preloader" is normal but need installing drivers correctly. You can try this: Driver_Auto_Installer_EXE_v5.1632.00.zip - 8.8MB
Reboot VM and try with the device turned off!
For using SPFT or SP_MDT your device not need in the bootloader mode. Device turned off - conect USB - look about USB PORT COM - Scan - Start All
If you not know how to do so Read Upgrade software guide for factory assembly line.pdf
Here file and more about: Upgrade tools and USB driver - Armor 8 Pro
___________________________
UP: Maybe SP need more than you know.
I used the SPFT and worked good to me with Win10.
May be SPFT can help more than SP: SP_Flash_Tool_v5.2124_Win
For using SPFT your device not need in the bootloader mode. Device turned off - open sxcatter file - look for Download Only option (NOT use FORMAT+....!!!!) - now with the device turned off conect USB - press DOWNLOAD (Ctrl + D).
Well, you saved my phone. Thanks for the help, I really appreciate that. I installed Windows 10 and the drivers you linked me and via SP Flash Tool I managed to flash the stock ROM after connecting the device with a USB cable. Thanks again.
How do I get this phone into download mode? Cannot seem to get it to flash
I've followed your tips but I cannot get the phone recognized by the flash tool.
I've collected full details here: https://android.stackexchange.com/questions/248035/bootloop-in-ulefone-armor-8-pro
Can SPFT be used with Linux?
jlbradl said:
How do I get this phone into download mode? Cannot seem to get it to flash
Click to expand...
Click to collapse
I know the fastboot mode. It is entered by pressiong Volume + and power button simultaneously.
stwm25 said:
Thanks for the reply. I have the model with 6GB of RAM as well and I am currently trying to recover my phone by using Windows 11 in a virtual machine. The bootloader is unlocked and I tried to flash the EU version of the stock ROM (GQ3090RH3_KSX70H_Ulefone_EEA_20210902_V01(EU).zip) by using SP_MDT_exe_v3.2048.02.00(Client).zip (after installing the required drivers), but as I have already specified I can't boot in download mode for more than a few seconds. My computer recognises the device as "MediaTek MT65xx Preloader" but the phone immediately reboots and I am not able to flash the stock ROM.
Click to expand...
Click to collapse
did you fix your phone?
Alex76rod said:
did you fix your phone?
Click to expand...
Click to collapse
i have the same problem.
it wont stay turn off
so the sp tool can't flash it.