Hi all, my problem is that I made a backup of my cel is this variation D260a backup but gave me error and confident that I would work to restore and probe not happened again tigo logo and have seen several roms but when I try me "Instalation Abort" (Bad) appears did the process and get this rom Q203_BLU_apbp_full_20130521 but just do not work in advance I appreciate your help, sorry for my bad English
PD : I made the factory restet and full wipes and still doesn't work!! please help!! and sorry for the title it wasD260a not Q260a
please if someone knows about a stock rom for this device , I need it as soon as possible is for my nephew
Related
Hi everyone.
I Had CM7 beta 6 installed on my defy, and I stupidly tried to update 2nd init, so now the cell phone is bricked.
actually I can enter on bootloader and on stock recovery, but I´m not able to flash any room.
I tried to make a factory reset and flash rooms in rsd 4.9 but the following error is shown: failed flashing process. Unable to retrieve initialization values from INI file. (0x7029); phone conected.
My battery is full, I wiped, and tryed nordic rom, JRDNEM_U3_3.4.2_164, JRDNEM_U3_2.51.1_ I get the same mistake everytime.
some guy here had a problem when he installed 2nd init in cm7 just like me, but he was having other problem and solved flashing french rom. it didn´t worked for me.
any ideas??
First, you should post this on general section, ot developers forum. Just wipe all then reflash your favorite 2.2 SBF, and never try to update bootmenu in CM7 again, since it already have bootmenu.
eae cara!
sorry for posting at the wrong place.
I wiped all and tried to flash many 2.2 roms as I sayd, but Im unable to flash. Only get. failed flashing process
arthurlage said:
eae cara!
sorry for posting at the wrong place.
I wiped all and tried to flash many 2.2 roms as I sayd, but Im unable to flash. Only get. failed flashing process
Click to expand...
Click to collapse
OK, I solved my problem! I was not beeing able to flash another room because I was using RSD 4.6 instead RSD4.9.
But when I was flashing the ROM with RSD 4.9, my battery died. And I got code error.
So I Used Mcgyver showed here: http://forum.xda-developers.com/showthread.php?t=892026
to solve the baterry problem!
And my defy went back to life. almost perfect. now the touch screen is not working.
If you are from Brazil, just flash the apropriate 2.2 SBF (there's a SBF for VIVO, TIM, CLARO and a Retail version) and see if the problem persists. If yes, send it to warranty
I wiped all data and my touch it´s back to work!
Hi, few months ago i rooted my htc wildfire and now i wonna sell it so I must back to official rom and i have a problem, before I installed new rom (cyan7) i did buckup all in clockworkmod and after restoring and back to original rom few apps doesn't work especially setup application (config for first use) and I dont have others keyboard language only english, dont have any rings and wallpapers.
I install RUU "RUU_Buzz_Froyo_HTC_WWE_2.22.405.1_Radio_13.55.55.24H_3.35.20.10_release_160191_signed" and it doesn't work to.
please help me becouse i dont know where is a problem ??
This is my first post so please be patient if I do something wrong and sorry for my language (original polish) and I am noob to
ok i have made it I install "RUU_Buzz_HTC_WWE_1.37.405.1_Radio_13.53.55.24H_3.35.19.25_release_151892_signed" than upgraded, did s-on, upgraded soft reset for manufakture and it's working perfectly post can be closed
Hi.
I have a problem, my HTC touchscreen don't work is Android OS, but its full working in recovery (4ext). I flashed lots of rom, i wipe everything then install official RUU but it's still not working. I use TP calibration pack without success. Sorry for my bad english.
Please help
read this thread
http://forum.xda-developers.com/showthread.php?t=1239238
it might help you
best wishes to you
RECENTLY I STARTED HAVING BATTERY PROBLEMS WITH MY SAMSUNG GALAXY S DUOS
I LOOKED UP ON THE WEB AND SAW THAT CUSTOM ROOM'S MAY SOLVE MY PROBLEMS
I INSTALLED A CYANOGEN OS BUT STILL THE BATTERY PROBLEM PERSISTED
THEN I BOUGHT A NEW CHARGER
IT SEEMED THAT THE NEW CHARGER SOLVED MY PROBLEM
SO I DECIDED TO SWITCH BACK TO MY STOCK FIRMWARE
I THOUGHT THAT WHY NOT TRY STOCK FIRMWARE OF ANOTHER DEVICE
BUT BY DOING THIS I ENDED UP WITH THE-->>"FIRMWARE UPGRADE ENCOUNTERED AN ISSUE. PLEASE" ... BLAH... BLAH... BLAH
THEN I DOWNLOADED STOCK FIRMWARE FOR MY DEVICE ONLY AND FLASHED IT
IT GOT RUNNING
BUT AFTER A FEW DAYS I GOT BORED WITH THE LAGGY STOCK FIRMWARE
SO I SEARCHED XDA FOR ANOTHER CUSTOM ROM FOR GT-S7562
I DECIDED TO FLASH THE PMP LIGHT ROM ESPECIALLY MADE FOR GT-S7562
BUT AFTER FLASHING IT I HAD GSM CONNECTION PROBLEMS
SO BACK TO STOCK ROM AGAIN
BUT THIS TIME WHEN I FLASHED THE STOCK ROM IT GOT STUCK AT THE SAMSUNG LOGO
I COULDN'T GO INTO RECOVERY MODE THEN
SO I CORRUPTED THE DEVICE AGAIN AND INSTALLED THE STOCK FIRMWARE
BUT AGAIN BOOT LOOP NO BOOT SOUND AND NO RECOVERY
I TRIED MANY THREADS
I TRIED http://forum.xda-developers.com/showthread.php?t=2426426
I TRIED http://forum.xda-developers.com/s7562/general/troubleshoot-pit-file-baseband-files-t3246791
AND MORE AND MORE THAN THE NUMBER OF NERVE CELLS IN MY BODY
SO...
PLEASE ANY HELP WOULD BE APPRECIATED
I WROTE THIS WHOLE THREAD WHILE CRYING:crying::crying::crying:
hey download stock rom files alone ..... like pit and csc etc ....
and flsah them this will work
i'm very bad in english ...sorry :silly:
I have tried before but without success any way thanks i will try it once again
boy maztoul said:
hey download stock rom files alone ..... like pit and csc etc ....
and flsah them this will work
i'm very bad in english ...sorry :silly:
Click to expand...
Click to collapse
didn't work !!
Hey!
First of all, this post will be too hard to write because of my English.
I had decided to improve the performance of my Fame a long time ago (I have to clarify that I'm a noob at flashing roms and doing related stuff). So I flashed Galaxy Fame - Stock deodexed and it worked perfect.
After a while my cell phone became slow again so I installed Cyanogenmod 12.1. I didn't like that rom due to the bugs and performance.
So I wiped the data/cache/dalvik and re-flashed the previous deodexed rom again.
What's the problem? It boots and stays in the "s6810L" screen for a few seconds, then reboots and stays in that screen again for a few seconds and THEN it shows the CWM recovery menu.
I haven't tried another rom yet, but I want to know why it didn't work this time... I really like the deodexed rom because it's so smooth and fast.
What am I doing wrong?
I'm sorry for my english again, thanks in advance, and regards!
Edit #1: I'm using this CWM
Hi !
When flashing roms a factory reset is recommended especially when flashing between 2 totally different based roms , cyanogen / stock
My advice is to use odin and revert to stock , don`t flash via recovery
Also , I can move this thread to the designated location if you continue to have problems and the solution I suggested doesn`t work , there may be more users with the same device.
Use the same thread you have linked above to get the firmware
Good luck and let me know !