Hello Guys
For everyone that try to root your phone, i root my inew v3 and works great!
You will need to download this program (chinese but its ok)
This is the link i will translate.
http://tugagadgets.wordpress.com/2014/01/09/how-to-root-inew-v3/
1.Download the program Shuame (have the link on website)
2.Install and when pop up the splash screen with 2 buttons (chinese) click on the white.
3.After that , and the phone conected to USB, click on top on ROOT button, and wait.
4.This will run and take a few minutes, the phone will reboot one or more time. (For me on second reboot, ask for pin code (sim card) after i put the pin they finish)
5.After that will appear a pop up that say is rooted.
6.Then you can check the app Kinguser on your phone, and its done
.
PS: For me works great so, It's at your own risk USB DEBUG need
Phone need's to be in usb debug mode
Yes its need!
Sorry
borgami said:
Phone need's to be in usb debug mode
Click to expand...
Click to collapse
Yes Thanks i did remember that :cyclops:
Thanks for Portuguese, here is Turkish review and root procedure who needs.
You can Translate it via Google in any language.
adimavi said:
Thanks for Portuguese, here is Turkish review and root procedure who needs.
You can Translate it via Google in any language.
Click to expand...
Click to collapse
You are welcome :good:
I can not open links.
EvangelineX said:
I can not open links.
Click to expand...
Click to collapse
Wich one?
http://tugagadgets.wordpress.com/2014/01/09/how-to-root-inew-v3/
Shuame worked for me, the ui is a bit different (no white button to press, just a button that says root) and it failed on 1st time, maybe cause i din have the drives pre installed.
On 2nd try, and again after some 5/10mins, it was rooted ^^
I can't access the date/time settings to set them up, it gives error ... everybody has same problem?
Elusivo said:
Shuame worked for me, the ui is a bit different (no white button to press, just a button that says root) and it failed on 1st time, maybe cause i din have the drives pre installed.
On 2nd try, and again after some 5/10mins, it was rooted ^^
I can't access the date/time settings to set them up, it gives error ... everybody has same problem?
Click to expand...
Click to collapse
Well i just check now and i can't to, :crying:
But you can change the hour on clock, but date can't.
Maybe any app to do that.
PS: Did you try the reset factory?
Try clock sync apk but not resolve.
Inew V3 Missing the developer options
Hello,
all.
I´m new here and have the following problem.
I got a new Inew V3 from China.
I want to root the phone, but I can´t find the developer options. Without this I can´t activate the debugging mode.
What can I doe?
It will be nice when somebody can help me.
Cheers
Klaus
KM1954 said:
Hello,
all.
I´m new here and have the following problem.
I got a new Inew V3 from China.
I want to root the phone, but I can´t find the developer options. Without this I can´t activate the debugging mode.
What can I doe?
It will be nice when somebody can help me.
Cheers
Klaus
Click to expand...
Click to collapse
Go to the settings-about phone and tap 6-7 times on version number and you will see on screen that you are a programmer now. Then go back and you will found the developer options menu.
nikstar1 said:
Go to the settings-about phone and tap 6-7 times on version number and you will see on screen that you are a programmer now. Then go back and you will found the developer options menu.
Click to expand...
Click to collapse
Thank you for the info.
I tried it with my Inew V3 but it didn´t work.
I tried Z4root tool. This tool didn´t root my phone, but it shows me the hidden developer options.
After this I was able to activate debugging mode and with the tool Vroot 1.7.4 I rooted the Inew V3 very quick.
not easy to root it
Please check the forum you have one root here.
http://forum.xda-developers.com/showthread.php?t=2604013
Inew V3 root
brady56 said:
not easy to root it
Click to expand...
Click to collapse
It is very to root with Vroot
It's also possible to root the inew V3 with the great app Framaroot.
Link to Framaroot thread: http://forum.xda-developers.com/showthread.php?t=2130276
im cani usb dibauling
nikstar1 said:
Go to the settings-about phone and tap 6-7 times on version number and you will see on screen that you are a programmer now. Then go back and you will found the developer options menu.
Click to expand...
Click to collapse
How active USB dibuling inew v3?
You can active it from developer option menu
INEW V3 Problem
Hello everybody,
I own an INEW V3 and i have the following problems:
before 2 weeks my device start to freezes and i had to take off the battery and put it back in order to turn it on again.
And unfortunately after several times it doesn't open at all.
I change firmware and it worked fine for a couple of hours, now i have the same problem!!!
The phone is fully charged!
I change firmware 3 times ( Versions: 1.0.4 - 1.0.8 - 1.1.1) and i have exactly the same problem.
Notice : if i cover the screen of the phone (after firmware change that works fine for some hours) the device imediatelly freezes and doesn't turn on!!!
Related
SORRY FOR MY ENGLISH
This tutorial made by me!
First of all, the ROM Retail BR is available for download a file. "sbf". It is like a picture of the Android system, in this case, a clean image without any operator customization. The Motoblur continue, but the icons/menus/bootanimation carrier will leave, leaving your device "clean" as possible.
*** IMPORTANT ***
Make every procedure at your own risk. Doing it wrong can brick (damage) your phone and turn it into a very stylish paper weight. I´m not responsible for possible damage.
PROGRAMMES REQUIRED
Motorola-Drives
RSD-Lite 4.9
2.2 SBF BRAZIL - FIX
FOOTSTEPS
1- Install Drivers and RSD;
2- Extract the zip file;
3- In its Milestone 2, Go to Settings menu -> Applications -> Development -> Enable USB Debugging;
4- Connect your phone to your computer using the USB data cable;
5- Wait for Windows to find your device and install all drivers. Next, open up RSD Lite and wait until the A953 to appear in the table;
6- In RSD Lite, select the file that you downloaded the SBF and extracted the text box and click the Start button;
The whole process didn´t takes less than 10 minutes and the phone will reboot a few times. The RSD Lite will ask eventually connect to the phone manually. NOT DO THIS. Be patient and wait until it is written "Finished and PASS" on the table RSD Lite.
Tips
1- Make the whole process with the battery above 80% for no risk.
2- Restore factory the device BEFORE and AFTER flashing is HIGHLY recommended.
3- Once the new clean ROM, access the Android Market and update all applications available.
Will this work on a german Vodafone device too?
Rotkaeqpchen said:
Will this work on a german Vodafone device too?
Click to expand...
Click to collapse
No.
Only Brazilian cell phone.
I do the process, no TIM more at the boot, but already have TIM MENU at the APPLICATIONS MENU from android
is this menu in tim chip?
for this process need to change de USB CONNECTION to MOTOROLA PHONETOOLS
the process here do not pass to 5mim
i try to make a backup from original sbf, but i cannot
Surely the process itself will work for any milestone 2 device anywhere in the world so long as you have the correct sbf for your phone?
So this should work for a german vodaphone M2 if you used the german vodaphone sbf. Try and confirm it before hand though!
Sent from my MotoA953 using XDA App
skulljoi said:
I do the process, no TIM more at the boot, but already have TIM MENU at the APPLICATIONS MENU from android
is this menu in tim chip?
for this process need to change de USB CONNECTION to MOTOROLA PHONETOOLS
the process here do not pass to 5mim
i try to make a backup from original sbf, but i cannot
Click to expand...
Click to collapse
The Tim Menu is normal. It´s only services of carrier.
Friend,
I did this process, but it only restarted once .. and my apps were not deleted, only the icons are gone TIM .. is this normal? bootanimation moved to the "M blur. Apparently this normal.
yeah tim removed from boot
my device rebooted to start upload and after finished the flash he rebooted again
then twice
but sometimes when i access my recents call everyone start with same picture and after a little time all got your pictures, someone have this problem?
skulljoi said:
yeah tim removed from boot
my device rebooted to start upload and after finished the flash he rebooted again
then twice
but sometimes when i access my recents call everyone start with same picture and after a little time all got your pictures, someone have this problem?
Click to expand...
Click to collapse
Yeps. I have this bug too. Nothing to worry about
For everybody else looking for SBF files for different countries, check the available list here.
I need to restore the original sbf UK but rsdlite doesn't see my M2
Driver successfully installed and device recognised by Win XP
did you have android sdk intalled?
did you have some adb or eclipse oppened?
did you have pda intalled?
try to clean everything and then connect the phone try to see it on SDK android.
then connect to the phone wait some time less then 5 min and then he got your phone
I needed to turn M2 into bootloader mode (power + up arrow of the d-pad), now rsd can detects it
My Milestone2 combo keys for bootloader mode is volume down + camera button.
Sent from my A953 using XDA App
The link to the SBF is broken, even in http://and-developers.com/sbf:milestone2
Maybe someone could upload it....
Please?
Edit: Forget, I got it, but just in case...
I need this file.
Someone can upload or email me?
@gmail.com
WTH motorola take out the SBFs dammit
we need to find anothers, or they updated SBFs, then we need a new links
the Brazilian rom has 320mb at rar, cant send it by email
megaupload or 4shared...
Anyone with a good upload rate AND good heart? =P
Pleaaaaase, can someone mirror the SBF? Im bricked
could somebody kindly upload /system/lib/libril-moto-umts-1.so from Brazilian Milestone2?
SBF links are down, otherwise I would have extracted it myself..
New Links !!
http://www.multiupload.com/OJ8I0QF92C
Hello. After factory reset my goclever does not stand up. It freezes at android logo and nothing happens later (no reset, just android logo). I think it might be because after installing apex pro i deleted stock launcher. Device manager sees it as ' Full AOSP on Rk29sdk ' (but cannot copy anything to device) and ADB sees no device.
Is there any way to do something ? Christmas are soon, so i will not send it to service cenrte.
haseo9119 said:
Hello. After factory reset my goclever does not stand up. It freezes at android logo and nothing happens later (no reset, just android logo). I think it might be because after installing apex pro i deleted stock launcher. Device manager sees it as ' Full AOSP on Rk29sdk ' (but cannot copy anything to device) and ADB sees no device.
Is there any way to do something ? Christmas are soon, so i will not send it to service cenrte.
Click to expand...
Click to collapse
You can't access recovery or download mode too ?
karimkahale said:
You can't access recovery or download mode too ?
Click to expand...
Click to collapse
Goclever hasn't published any R75 firmware yet. Also this tablet doesn't have any physical buttons except power switch. On my native language forum was sometime ago rumor that on downside motherboard is switch which combination with power button gives recovery menu. Personally i tried various combinations but didn't worked for me.
Any ideas ?
haseo9119 said:
Any ideas ?
Click to expand...
Click to collapse
Hello.
Which version of the device do you have?
7500
or R75
Those seems to be the same but are different.
I have stock android version for both
for 7500 - original, unrooted ( from a Russian site - don't remember)
for R75 - original, rooted ( a dump created by me from my device when I have received it)
Both works, were tested by me on my R75.
The firmware of 7500 flashed on R75 works, but you won't be able to use the capacitive buttons (as I told you are different).
The flash option is very simple:
1. Copy two files on the root of the sd card
2. Insert the card in the card slot of the device.
3. The flashing process will continue automatically.
Just tell me which one you need and a place where to upload the needed firmware. I can do the upload this weekend.
Regarding ADB, hmm... this is strange. I have done the same thing as you (deleted the launcher and restore to default) but adb was working with device in the android logo state.
I'm using Windows 8 and I have installed the device as test ADB device (from windows drivers).
Bye.
Edit:
This is the link for R75 rooted firmware.
http://www.sendspace.com/file/0fhask
I hope it helps you.
Bye.
Edit:
This is the link for GoClever tab 7500
http://www.sendspace.com/file/shrso4
Bye.
On the back he have written that he's tab 7500. Soon i will try to flash him with your 7500 image. Hope it will work ^^ Thank you very much.
Everything on first look is working on. Except wifi card, which doesn't turning on.
/update
R75 software fixed it. Don't trust manufacturer anymore.
haseo9119 said:
Everything on first look is working on. Except wifi card, which doesn't turning on.
/update
R75 software fixed it. Don't trust manufacturer anymore.
Click to expand...
Click to collapse
its not working with me. i have kingston microsd card 8gb and i put 7500 image on root of the card.then, i started the tablet but nothing happens. it still show ANDROID logo and wont flash,please help!!!
goclever
severijan said:
its not working with me. i have kingston microsd card 8gb and i put 7500 image on root of the card.then, i started the tablet but nothing happens. it still show ANDROID logo and wont flash,please help!!!
Click to expand...
Click to collapse
hello
this may help some one later
to get into recovery if your R75 table wont boot you have to take it apart the button is on the underside of the board behind the screen (silly place to put it) i have being talking to goclever support and more firmwares are going to be added to the site. if you want yours adding send them an email requesting it (one may not be enough ) i have just had this problem and after a month they agreed to take it back and have reflashed it for me
hope this helps someone
Hello guys. My Jiayu G3 was locked because I let a kid play on the passcode for too many times and now its locked. It says "Too many attempts" and its asking for a username and password, which is basically your google account. Unfortunately i turned off the wifi so now no matter how many times i entered my account it says "Invalid username or password" and now its stucked there. I cant also enter recovery mode by pressing Power + Volume Up button then the robot with the red triangle is appearing. Any ideas what should i do to fix it? plss help me... its been like this for months now, cant even use it.... or theres no more hope and i should just buy a new phone?
bump
Try SP Flash tool to flash Rom i think it will work..
if u need help how to flash rom with flash tool. Just flow instruction on this page http://www.modaco.com/topic/359590-...very-ics-spell-check-fixed-jelly-bean-update/
specially "JellyBean Official Update How To" Section on above page
hey will this still work even if i dont have USB Debugging enabled? alos my phone is not rooted.. i got to know this stuff when my phone got locked and i searched for a fix.
Yes it will work no need of ROOT or USB Debugging Just follow instruction on above link..
Press Thanks If I help you
faizkalwar said:
Yes it will work no need of ROOT or USB Debugging Just follow instruction on above link..
Press Thanks If I help you
Click to expand...
Click to collapse
um, which instruction should i follow first?
Good day all on XDA,
Im having a bit of a problem wth my tablet,
I recently bought two of the same chinese tablets,
They are the softwinner V11, based on the A33 allwinner chipset.
One of the two had an issue, so i tried to clone the rom,
but along the way something went wrong and now i cant go past the first logo.
I tried to get in recovery mode, i tried every possible button combination i could think of,
but it did not work.
Now the weird thing is, before i could push and pull files with ADB, so my drivers worked.
But now it does connect, but the device is recognized as USB Developer when its connected.
And when i use the driver it says it is working fine, but ADB doesnt recognise it.
And when i connect my tablet holding the volume up button, and pressing the power button repeatetly,
it also connects, but as an unknown devices. And the screen stays black.
In both cases the drivers that used to work (and work on the other) wont work.
I dont want to give up, and since there seems to be life in these tablets, im hoping someone here could help me, and knows something i cant think off.
Thanks in advance,
Robbie
Did you get them fixed, I fixed mine (all winner v11 10.1" tablet) by burning an image for the device to an SD card then inserting it into tablet which automatically installs when powered on. It runs better than before, cameras don't work but can be fixed after.
rock6963 said:
Did you get them fixed, I fixed mine (all winner v11 10.1" tablet) by burning an image for the device to an SD card then inserting it into tablet which automatically installs when powered on. It runs better than before, cameras don't work but can be fixed after.
Click to expand...
Click to collapse
Hi,can You send me a link about this firmware? My touchpad won't work after flashing,and I don't find the right firmware yet. Thanx!
nettudky said:
Hi,can You send me a link about this firmware? My touchpad won't work after flashing,and I don't find the right firmware yet. Thanx!
Click to expand...
Click to collapse
I have sent you a private message
Where to get firmware to this device? Astar-y3 v11 i search everywhere
rock6963 said:
I have sent you a private message
Click to expand...
Click to collapse
Mine is Astar-y3 v11 10.1 the board is GA10H_V1.1 20141110
I been search for the firmware everywhere without any luck
This rom will works fine for your tablet , http://www.filefactory.com/file/15k...X0233_DBL2855_ESP8089_GSL3675_HD_20150206.rar
Flash (iso) file for Softwinner V11 A33
Hy,
I am looking for flash possibilities, because I deleted settings app from my Softwinner V11 chinese tablet, and it stays at first logo.
Android Build: astar_y3_eng 4.4.2 KVT49L 20150403 test-keys
Vendor: sun8i
SDK version: 19
Thanks in advance
Attila
all winner v11 10.1" tablet
rock6963 said:
Did you get them fixed, I fixed mine (all winner v11 10.1" tablet) by burning an image for the device to an SD card then inserting it into tablet which automatically installs when powered on. It runs better than before, cameras don't work but can be fixed after.
Click to expand...
Click to collapse
I deleted "settings" app-s supposed to be viruses and now the boot process stops at All winner logo.
Could you send image or any info how to flash my tablet?
akapusy said:
I deleted "settings" app-s supposed to be viruses and now the boot process stops at All winner logo.
Could you send image or any info how to flash my tablet?
Click to expand...
Click to collapse
i'll send a PM with links, asap
nettudky said:
Hi,can You send me a link about this firmware? My touchpad won't work after flashing,and I don't find the right firmware yet. Thanx!
Click to expand...
Click to collapse
rock6963 said:
i'll send a PM with links, asap
Click to expand...
Click to collapse
What about gps ? Tablet : softwinner 717
rock6963 said:
i'll send a PM with links, asap
Click to expand...
Click to collapse
Hey, I got 2 similar tablets for my kids - both are plagued with malware that won't go away on factory resets - du speed booster, du battery meter, 'facebook' popups on bottom right corner (kids don't have FB).....
The tablet seems to be rooted, and there's a recovery already in place.
Could someone kindly give me a malware-free ROM to flash please ? Any maybe indicate how to go about it ?
Basic info should be fine - I've rooted and custom rommed a number of devices....
thanks a bunch!
David
Hi would anyone happen to have the links to this firmware s my astar-y3 10.1 tablets giving me trouble?
Cheers
digitiser dont work now
gewoonrobbie said:
Good day all on XDA,
Im having a bit of a problem wth my tablet,
I recently bought two of the same chinese tablets,
They are the softwinner V11, based on the A33 allwinner chipset.
One of the two had an issue, so i tried to clone the rom,
but along the way something went wrong and now i cant go past the first logo.
I tried to get in recovery mode, i tried every possible button combination i could think of,
but it did not work.
Now the weird thing is, before i could push and pull files with ADB, so my drivers worked.
But now it does connect, but the device is recognized as USB Developer when its connected.
And when i use the driver it says it is working fine, but ADB doesnt recognise it.
And when i connect my tablet holding the volume up button, and pressing the power button repeatetly,
it also connects, but as an unknown devices. And the screen stays black.
In both cases the drivers that used to work (and work on the other) wont work.
I dont want to give up, and since there seems to be life in these tablets, im hoping someone here could help me, and knows something i cant think off.
Thanks in advance,
Robbie
Click to expand...
Click to collapse
my digitiser does not respond at all
I can see that you have been bombarded.
Sorry that so many people are looking to you for a33 flash files and i am additionally sorry for adding to it. My a33-10ql-v1.1 flash file seems to be the "Bigfoot" of flash files. I cannot, for the life of me, find the file. I have been searching, relenlessly, since December last year. Im not usually one to stack on a full pile but i sure could use the help. If you could bring youself to find the time i would be forever greatful. Thank you, whether you can or cannot. Have a great evening.
A few days ago I rooted my phone, using ADB commands it let me but into bootloader but my phone didn't show the option to boot into recovery. It turned out i had to use another usb-c cable and then it did
Hi there, I have tried to find a solution today for this issue but I can't find anything useful anywhere .
Last night I received another update via OTA 151115 and proceed to install it as the earlier ones didn't work. Surprisingly this one worked and after restart my phone didn't had any trace of google apps on it, try to install google play, framework and so but the phone says it's not compatible with google (Big time). Then I went to the bootloader to perform a wipe/erase everything and here's when the problem began, it was stuck in the screen that says optimising applications (the one before starting the setup) and after half an hour unattended the phone restart itself one after another, like in a loop.... From this point on, I haven't been able to power on the device anymore.
It was bought through a third party seller from China, already contacted them and waiting for an answer...
Any clue about what can I do to use my phone again?
Update: I can see the oppo logo after pressing volume up plus power buttons for around 15 seconds but it shows for less than a second the screen it appears when it's updating the software and then it switches itself off... Is this a sign of possible recovery in some way?
just downloaded the last 151115 official update from the oppo community forum but I've got a problem. I can not enter the fasboot or recovery mode because the phone is like trying to install something and it constantly switches itself off... The day this happened, I had two files in my root directory, one was the few update and the other was a full Google thing in the same format than the fw file, I'm afraid I selected the wrong one and that's why the phone went crazy. I guess if there's some way to cancel that attempt to update the wrong file or reset that thing in some way, I'd be able to start over but I can't find anything grgrgr
By the way, the last ota update allowed google maps to work flawlessly and also Instagram, two of my biggest concerns with the phone
I'm even trying to contact oppo service to send the thing and sort it out that way xx
Cheers
Pedro
I've just contacted Oppo Customer Service in Europe to see if they have any solution for my problem as I can't make this thing to start and the battery also doesn't seems to be charging though... No response for the moment, just an automated one confirming the reception of my enquiry
Should I start thinking about my lovely new phone as my new paper weight?
peterpanda1970 said:
I've just contacted Oppo Customer Service in Europe to see if they have any solution for my problem as I can't make this thing to start and the battery also doesn't seems to be charging though... No response for the moment, just an automated one confirming the reception of my enquiry
Should I start thinking about my lovely new phone as my new paper weight?
Click to expand...
Click to collapse
No, no you have a chance to save your phone. If you have to R7 plus M Oppo Chinese version, I can help you. I also had this problem, but he was able to solve it. My Skype: ed_mobstyle.
Hi mate, thanks for the answers. Yes it is the China mobile version "M" I don't have Skype I'm afraid grgrgr
Cheers
Pedro
I was able to fix this problem fairly easily.
First I entered recovery (press Power + Volume Down when the phone is booting up)
Then from the device menu I installed a ROM, you want to download the version you last used. (MAKE SURE IT IS FOR THE OPPO R7 PLUS M)
After installing the stock rom, it will go into installation and have you set up your phone.
After you installed the ROM, download OPPO tools v 1.6.5
Open Oppo Tools and root your phone this will take a few minutes.
After you have rooted your device open Oppo Tools again and select Unlock Google Mobile Services (this too me two weeks to figure out).
Let the phone restart, after it is finished, you should have basic google functionalities (Playstore and Frameworks).
Now since you are rooted, it means that your phone will not download any further OTAs and you will have to install them as ROMs, you can do so by repeating the above process, but I'm not sure of the functionality of Oppo Tools past the most current version.
I cant post links to provide you to where the ROM files and Oppo Tools are at this moment
The roms will be located on the "[ROM][STOCK] Official R7 Plus Roms | R7Plus, R7PlusF, R7PlusM [15 Sep 2015]" of Oppo Fourms
The Oppo Tools will be located when you google "OPPO Tools apk" on your computer and it will take you to the thai version of Oppo Fourms follow the link there to download the apk
Hi mate, thanks for your answer but my problems is that I can't enter the recovery mode cause the phone try to install something and then it switches itself off
I've tried to connect the phone to my laptops and sometimes they recognised it as Qhsub something and I can't find anywhere this driver. Then all the softwares I've got ask me for a scatter file which I don't have....
Also trying to contact support from the brand. For now just send them my data and the phone's imei and now waiting for the magic response... They are excessively slow in their answers!
Thanks so much anyway
Cheers
Pedro
hi mate I guess un the malysia oppo community you can fin the drivers and every things about oppo r7pkusM
sollitair said:
hi mate I guess un the malysia oppo community you can fin the drivers and every things about oppo r7pkusM
Click to expand...
Click to collapse
Just checked in and didn't find anything but the bloody oppotools lol.
Cheers mate!
so please if you still with the same problem let me know I'll try to write an email directly to you with all
links you need for it.
[email protected]
best of luck
Still at the same point mate! The thing keeps on trying to install something and switches itself off. My windows laptop runs on win10, the other is a Mac so I guess useless for this matters... The battery runs out faster than ever even being off. Disaster! Lol
I would really appreciate your help
Cheers
Pedro
This is a video I made to explain how this thing try to boot and it never makes it further...
https://www.youtube.com/watch?v=2LNiWODlUd0
Hi matr
believe me I have just coming back from oppo office and I show them your video and what they said '' you have to change it with the guarantee you have''.
it clear now for me and I state that I had the same problem all what I did is installing the oppo drivers on my PC boot on fastboot mode give some commands to unlock it and tjen I flash the original recovery from oppo then tje coloros was installed and updated as well before flashi'g again TRWP recovery and right now I''m writing to you from my r7plusm it's work smothly rooted with the same original oppo rom coloros.
I hope that your just missing something and let me know to to follow you step by step on this.
cheers P
sollitair said:
Hi matr
believe me I have just coming back from oppo office and I show them your video and what they said '' you have to change it with the guarantee you have''.
it clear now for me and I state that I had the same problem all what I did is installing the oppo drivers on my PC boot on fastboot mode give some commands to unlock it and tjen I flash the original recovery from oppo then tje coloros was installed and updated as well before flashi'g again TRWP recovery and right now I''m writing to you from my r7plusm it's work smothly rooted with the same original oppo rom coloros.
I hope that your just missing something and let me know to to follow you step by step on this.
cheers P
Click to expand...
Click to collapse
Hi mate, my problem is that my computer detects the phone as qhsusb_bulk and I've tried every single file I found with that name and nothing changes, well, the device name from unknown to com1, com2... up to com13 I have seen.... Other thing is that I can't enter the fastboot mode or recovery mode neither. I wish I had an oppo service near home but I live in Uk, now I'm trying to get service from oppostyle and waiting for an answer. To be honest with you, I'm really annoyed with all this, never had a problem with bricked androids or iphones until I met this "guy" lol
Cheers
Pedro
I'm really sorry dude I hope I can help you as I did for mine it was quit simple with the same driver problems,so try to uninstall all drivers you have for oppo and install the one I shared with you taken from my ohone directly that the only way you can give any commands to your phone to switch to fastboot mode even if the problem still present
when I try to install the driver on my win10 laptop it says this...
Using an old win7 laptop I managed to install the bloody Qhsub driver and now the phone appears in the com ports under the name Qualcomm HS-USB QDLoader 9008 (COM4) does this means the phone really doesn't exist?
Update to this thread, I can't do anything until I find a proper driver for the phone which actually is recognised by my laptop as Qhsub_bulk and I can't bloody find this anywhere at least for making 6795 processors or specifically for this model...
Any clue?
peterpanda1970 said:
Update to this thread, I can't do anything until I find a proper driver for the phone which actually is recognised by my laptop as Qhsub_bulk and I can't bloody find this anywhere at least for making 6795 processors or specifically for this model...
Any clue?
Click to expand...
Click to collapse
No need panic ))) I've sent you a set for recovery your device )))) Good luck
ed_mobstyle said:
No need panic ))) I've sent you a set for recovery your device )))) Good luck
Click to expand...
Click to collapse
Hi mate, thanks for your help. Tried to open the link you sent me but it says it's not available anymore grgrgr
Cheers
Pedro
peterpanda1970 said:
Hi mate, thanks for your help. Tried to open the link you sent me but it says it's not available anymore grgrgr
Cheers
Pedro
Click to expand...
Click to collapse
Hi, please check now