Database Info

Moto Q8 WM6.1

I have been using moto q8 for quite a while now. I found some interseting links to some chinese web site. Interesting because WM6.1 for Q8 is posted over here. Following is the link:
http://download.cnmo.com/5/4727.html
First you have to translate it in English using Google or Altavista etc. and then you can find the download link in the middle of the page (took me a lot of time finding it). On the download page there are five download links. You can click any of the link to download it. After downloading and extracting the file we get three folders, one contains the rom, the second contains the RSD Lite software and the third contain the usb drivers for moto q8.
Also, the installation instructions are also in chinese. But understanding the translated chinese is very difficult too.
I have downloaded the software but couldn,t find the courage to install it.
Please help if some body have tried it.

I tried it on my CDMA Moto q, didnt work, it failed & the phone restarted but luckily it wasnt bricked & everything was back to normal.
even if you try it i think it wont brick your phone.

Actually it will brick your phone search the forums somebody already tried it. And the reason why it dind't brick rahulduggals phone is because its a cdma not gsm so the program didnt even flashed it

Thanx for the suggestion, but I think the other guy who tried it didn't do it in the right way. It is very clear from his post. The first have to be put in the boot loader mode by the following manner:
1- Shut down the phone by pressing and holding the power button
2- Switch on the phone by pressing and holding " * (or A) and Enter " buttons
Then you will see a screen stating:
"Motorola Flash Mode
Boot Loader Version:
BOOT_G_03.12.04R_MPAP
Please Connect the USB Cable"
I hope someone expert will help me.

mmzubair said:
Thanx for the suggestion, but I think the other guy who tried it didn't do it in the right way. It is very clear from his post. The first have to be put in the boot loader mode by the following manner:
1- Shut down the phone by pressing and holding the power button
2- Switch on the phone by pressing and holding " * (or A) and Enter " buttons
Then you will see a screen stating:
"Motorola Flash Mode
Boot Loader Version:
BOOT_G_03.12.04R_MPAP
Please Connect the USB Cable"
I hope someone expert will help me.
Click to expand...
Click to collapse
here is: http://motoqspanish.ace.st/software-f23/windows-mobile-61-disponible-motoq8-gsm-t387.htm

mislatero said:
here is: http://motoqspanish.ace.st/software-f23/windows-mobile-61-disponible-motoq8-gsm-t387.htm
Click to expand...
Click to collapse
Thank you I am trying this link

Success Moto Q8 WM6.1
I finally installed or flashed my Moto Q8 with WM6.1

mmzubair said:
I finally installed or flashed my Moto Q8 with WM6.1
Click to expand...
Click to collapse
ok but so far is the os stable??? does ur speaker phone buttoin work or opens internet explorer iinstead?
and what about your backlight?

it opens IE

aneotoena said:
it opens IE
Click to expand...
Click to collapse
that hella sux....i think ill stick to 6.0
i will update when or if motorola releases an official wm6.1 for moto q8

nicostar said:
that hella sux....i think ill stick to 6.0
i will update when or if motorola releases an official wm6.1 for moto q8
Click to expand...
Click to collapse
come here: http://motoqspanish.ace.st/

Do You have Problem downgrade fr ROM 2.03 TX WWE

Hi all,
I'm Indonesian. My Device is XDA II Mini. A few weeks ago I have upgrade the ROM to 2.03 TX WWE, used it for about week. A problem appear when I tried to downgrade the ROM to the original one from seeo2.com site the PC tell the error 150 (I think its about the connection).
when I read this forum, i know the many people have the same problem with me.. and still not found yet the solution for solving this problem.
With this situation I made this new thread to share our problem in this thread. Its about the history from ROM 2.03 TX WWE, about the maker of this ROM and for the warning massage for anyone who wish to write this ROM to their device so they will think 100 times to use this ROM.
Lets join this thread and hope there be a nice guy who can solve our problem.
regards
Eric
Jakarta-Indonesia

Hello,
I have the same problem with my magician. I flashed so many times some ROMs on my Magician before without any problems. But since I flashed the 2.03TX ROM, there is no way to flash any ROM. I also can't reflash the 2.03TX ROM. It always says, that there is an Connection Error.
I tried to flash with the official Setup and also with the No_ID.exe, but there is no chance to do something.
The 2.03TX is a very nice Rom, but i want to use the programm "Phone Extender" on my Magician and it doesen't run with 2.03TX...
Please help us someone, I want an other Rom on my Magician!

Where is everybody.....
Please Help us hiek hiek hiek.... cry cry cry....
Does anyone can help us ?????
Pleeeeaaaaseeee......

The same problem, the 2.03TX WWE is a nightmare for me.

I haven't got any problem.
Flashed just last week tx203->TMobile112->wm61.
Very happy with everything, I am using XP and O2 mini

you should flash from bootloader.

I have problem after try flash wm6 from 2.03 TX WWE phone only boot mode ... any help .. I try to flash same rom but I give same error on country id

I have the same problem.
Solution is to enter to the bootloader mode somehow and downgrade to original not bigstorage rom and than flash new cotula rom.
If you can't enter to the bootloader mode with power+camera+reset buttons try to hold longer or rapidly press power+camera and then press reset a few times. I'm succeeded finaly...

to bootloader mode mean screen with serial or usb status ... my problem is I try more rom but any flash I don't have original rom ... what I do?

hello im from Indonesia too...
You can use magicianUpdt_NoID (or another name, i forgot)
you can search at xda-developers ftp..

I have no problem with mine.
When I flashed this ROM it got automatically flashed twice.. I don’t know what happen but it was successful

Hello
I was sucessfull.
There is a 2 step flash!!!
P-O

I try to use this too but nothing no flash ....

Try this rom: http://rapidshare.com/files/18876133/NL_11300_131_11200.exe
If this doesn't work tell me the error message...

ok this img of error the image 1 when start exe the other when stat update noid

jovan.asanin said:
I have the same problem.
Solution is to enter to the bootloader mode somehow and downgrade to original not bigstorage rom and than flash new cotula rom.
If you can't enter to the bootloader mode with power+camera+reset buttons try to hold longer or rapidly press power+camera and then press reset a few times. I'm succeeded finaly...
Click to expand...
Click to collapse
Mine keeps reseting everytime it should go into the bootloader screen.
I can force it, but then the update wont continue anymore.
How did you do it?
---Edit---
Nevermind, found the solution here, its the old vista driver bug... :/
http://forum.xda-developers.com/showthread.php?t=291723

I use xp ...

well... it worked on mine...
Try the driver thingy anyway and follow the instructions to the letter.

I try more and more but notuhing

Here's what I did step-by-step:
- Recharge the battery to at least 70% in a electric charger (not connected to the PC).
- Go into bootloader (press the power button +camera button without releasing and click the tiny little hole on the right bottom side of the device, next to the audio entrance).
- The screen goes black, that's normal, with the help of a bright light you can see its written on the screen "SERIAL" and "V1.02" (or something similar).
- Go into Active Sync on XP (or Windows Mobile Device Center on Vista) and uncheck the option "Allow USB Connections".
- Connect your pocket pc to the PC usb (its still in the bootloader screen, right?).
On Vista (I think XP can skip this step)--------------->
- Go to Control Panel > Administrative tools > Services and start the services "windows mobile device connectivity" and "windows mobile device 2003 connectivity", its they are already running thats ok.
- Now go to Control Panel > System > Device manager, find your mobile device and force the update of the driver attached here.
- Now, press Ctrl+Shift+Esc for Taskmanager and kill "WMDC.exe".
------------------------------------------------------------------->
- Download this rom (46mb): http://rapidshare.com/files/18876133/NL_11300_131_11200.exe (its in english WWE)...
- With Winrar, extract that EXE into a folder.
- Copy the MaUpgradeUt_noID.exe attached here into that folder, with the rest of the files.
- Run MaUpgradeUt_noID.exe.
- If all goes well the update will take a loooong time and pass thru three install bars, that's normal.
- After that it recommends a Hard-reset (Power button + reset at the same time).
Now your rom is official, and you should have no more problems.
Install the Cotulla WM6.1 rom: http://forum.xda-developers.com/showthread.php?t=492937
Based on: http://forum.xda-developers.com/showthread.php?t=291723

[Q] Goclever R75 (7500) - boot freeze (bootloop ? )

Hello. After factory reset my goclever does not stand up. It freezes at android logo and nothing happens later (no reset, just android logo). I think it might be because after installing apex pro i deleted stock launcher. Device manager sees it as ' Full AOSP on Rk29sdk ' (but cannot copy anything to device) and ADB sees no device.
Is there any way to do something ? Christmas are soon, so i will not send it to service cenrte.

haseo9119 said:
Hello. After factory reset my goclever does not stand up. It freezes at android logo and nothing happens later (no reset, just android logo). I think it might be because after installing apex pro i deleted stock launcher. Device manager sees it as ' Full AOSP on Rk29sdk ' (but cannot copy anything to device) and ADB sees no device.
Is there any way to do something ? Christmas are soon, so i will not send it to service cenrte.
Click to expand...
Click to collapse
You can't access recovery or download mode too ?

karimkahale said:
You can't access recovery or download mode too ?
Click to expand...
Click to collapse
Goclever hasn't published any R75 firmware yet. Also this tablet doesn't have any physical buttons except power switch. On my native language forum was sometime ago rumor that on downside motherboard is switch which combination with power button gives recovery menu. Personally i tried various combinations but didn't worked for me.

Any ideas ?

haseo9119 said:
Any ideas ?
Click to expand...
Click to collapse
Hello.
Which version of the device do you have?
7500
or R75
Those seems to be the same but are different.
I have stock android version for both
for 7500 - original, unrooted ( from a Russian site - don't remember)
for R75 - original, rooted ( a dump created by me from my device when I have received it)
Both works, were tested by me on my R75.
The firmware of 7500 flashed on R75 works, but you won't be able to use the capacitive buttons (as I told you are different).
The flash option is very simple:
1. Copy two files on the root of the sd card
2. Insert the card in the card slot of the device.
3. The flashing process will continue automatically.
Just tell me which one you need and a place where to upload the needed firmware. I can do the upload this weekend.
Regarding ADB, hmm... this is strange. I have done the same thing as you (deleted the launcher and restore to default) but adb was working with device in the android logo state.
I'm using Windows 8 and I have installed the device as test ADB device (from windows drivers).
Bye.
Edit:
This is the link for R75 rooted firmware.
http://www.sendspace.com/file/0fhask
I hope it helps you.
Bye.
Edit:
This is the link for GoClever tab 7500
http://www.sendspace.com/file/shrso4
Bye.

On the back he have written that he's tab 7500. Soon i will try to flash him with your 7500 image. Hope it will work ^^ Thank you very much.

Everything on first look is working on. Except wifi card, which doesn't turning on.
/update
R75 software fixed it. Don't trust manufacturer anymore.

haseo9119 said:
Everything on first look is working on. Except wifi card, which doesn't turning on.
/update
R75 software fixed it. Don't trust manufacturer anymore.
Click to expand...
Click to collapse
its not working with me. i have kingston microsd card 8gb and i put 7500 image on root of the card.then, i started the tablet but nothing happens. it still show ANDROID logo and wont flash,please help!!!

goclever
severijan said:
its not working with me. i have kingston microsd card 8gb and i put 7500 image on root of the card.then, i started the tablet but nothing happens. it still show ANDROID logo and wont flash,please help!!!
Click to expand...
Click to collapse
hello
this may help some one later
to get into recovery if your R75 table wont boot you have to take it apart the button is on the underside of the board behind the screen (silly place to put it) i have being talking to goclever support and more firmwares are going to be added to the site. if you want yours adding send them an email requesting it (one may not be enough ) i have just had this problem and after a month they agreed to take it back and have reflashed it for me
hope this helps someone

[Resolved] [Q] [HELP] Is my MTK6589 phone hard bricked ?

EDIT : SOLVED :
Many thanks to slot78
Hello all.
I got my hands on a Inew I2000 phone (Mediatek 6589 cpu). I tried to flash it with the latest rom, and might have hard bricked it. Can you help me say if it is indedd hard-bricked, and if not how to revive it ?
What I did :
I used Flash Tool 3.1312
Got the rom from this page : http://www.needrom.com/mobile/inew-i2000/
After fighting with the drivers for a while, it seems my phone is ready to flash.
I selected the scatter-loader, cliced "firmware upgrade"
Pluged the phone.
The upgrade seemed to work fine. I got to the green circle. I unpluged phone. But hte phone didn't boot.
After that, nothing.
The phone doesn't seem to reac to anything. The screen stays black.
When I plug it, the list in device manager moves a bit ( showing that it still react to pluged USB) But I can't find the device anywhere on the list.
When I try to flash anything with flash tool, I clic load. Then, when I plug the phone, the loading start. But when the red bar reach 100%, nothing more happens.
From what I've found with google so far, it looks like I somehow had the wrong pre-loader in my ROM.
Now, I'm opened to suggestions.
Any way I can be sure wrther my phone is bricked or not ?
If not, what is the next step to revive it ?
Thanks in advance for any help.

Hello!
I think i can help to you! Send me a private message and tonight i will message back with the sollution...just i working now.
kaceps said:
Hello all.
I got my hands on a Inew I2000 phone (Mediatek 6589 cpu). I tried to flash it with the latest rom, and might have hard bricked it. Can you help me say if it is indedd hard-bricked, and if not how to revive it ?
What I did :
I used Flash Tool 3.1312
Got the rom from this page : http://www.needrom.com/mobile/inew-i2000/
After fighting with the drivers for a while, it seems my phone is ready to flash.
I selected the scatter-loader, cliced "firmware upgrade"
Pluged the phone.
The upgrade seemed to work fine. I got to the green circle. I unpluged phone. But hte phone didn't boot.
After that, nothing.
The phone doesn't seem to reac to anything. The screen stays black.
When I plug it, the list in device manager moves a bit ( showing that it still react to pluged USB) But I can't find the device anywhere on the list.
When I try to flash anything with flash tool, I clic load. Then, when I plug the phone, the loading start. But when the red bar reach 100%, nothing more happens.
From what I've found with google so far, it looks like I somehow had the wrong pre-loader in my ROM.
Now, I'm opened to suggestions.
Any way I can be sure wrther my phone is bricked or not ?
If not, what is the next step to revive it ?
Thanks in advance for any help.
Click to expand...
Click to collapse

I answer here,ok? Important info...
As you say in pm, yes the sollution the "test-spot"!
You have the truth!
http://www.4shared.com/download/5Y4TKOCfba/service_spot__1_.jpg?lgfp=3000
There is the spot!
You need to remove the back cover and you need 3 item: a piece of wire, a screwdriver (fot the back cover) and a rubber-ring.
First remove almost all the screw, except next to sd card slot (bottom left corner of the sd card slot)...This screw fix the main board and you can remove the back cover without remove this screw.
Put the battery to right position and fix it with rubber ring to the phone.
Prepare with the flash tools and rom, for flashing...(usb cable conect to the pc, scatter file etc...)
Start the flashing with the downlad button and inmediatly sort the spot with the motherboard screw (what you didn't remove) with the wire.
Waiting for the green circle! And Enjoy!
Pls let me know if you successful!
The problem was i think...There is two different mainboard in Inew i2000 the v1.1 and the v2.1...The newer stock roms belongs to second.
Here is a KitKat THEMED (it's just 4.2.1) rom: http://www.4shared.com/zip/WHdOpLytba/07_resurrection_feelKat.html
(little bit lightweighted and optimized) It's for PCB v1.1
First time do not going to panic...First time boot will be slow...and after that the system need 15 min for find myself...Wait for it!
Here is the lastest CWM based touch recovery
http://www.4shared.com/file/3qNEh_3Vce/recovery.html
Best Regards

I haven't succeded (yet) but thanks a lot for the info.
I think I got the right point on the motherboard. When I connect it, I can see a white led lightning up near the ubs port on the phone. So, I guess connecting the point makes my phone react.
But I think I might have a driver problem now.
Here is what happened.
Launch Flashtool as admin.
Load a scatterfile (any file, at this point I just want to be able to flash anything.)
Battery in, usb cable connected
press load.
the red progress bar imediately reach 100%
I try to connect he testpoints.
nothing more happens. Sometime I see various errors, not always the same.
Before finding the test point method, I tried all kind of drivers. Now I'm not sure which one is left on the system or wich is the correct one.
Anyway thanks for pointing the test points to me !
Also, thanks for the recovery and the ROM.
But none of them contains a preloader / scatter file. So, at this point, even if I get the right drivers I can't load them. I'll try them later if I manage to revive the phone, but right now my aim is ...
1 / Cleanup the drivers, and reinstall the right one
2 / Get flash tool to load anything on the phone via test point
3 / Find the right preloader and load it via test point
If I manage to do that, then I should be able to put back the back cover, and load the recovery "normally".
In the meantime, any advice is highly welcome.
Like :
- Any tips for cleaning up / installing drivers ?
- Any idea what the right preloader is ?
- Precise order on what to plug when flashig ( Battery / plusg USB / Load in flashtool / Connect points ? )
But more than eveything, thank you ! I might not have succeded yet, but at least I am not stuck anymore. Before your post I didn't know what to do. At least, now I have the test point and I can try something.
Also, sorry for the late answer. I had a lot on my plate, and didn't realise you had answered.
I suscribe to be sure not to miss any more answer.
Skot78 said:
I answer here,ok? Important info...
As you say in pm, yes the sollution the "test-spot"!
You have the truth!
http://www.4shared.com/download/5Y4TKOCfba/service_spot__1_.jpg?lgfp=3000
There is the spot!
You need to remove the back cover and you need 3 item: a piece of wire, a screwdriver (fot the back cover) and a rubber-ring.
First remove almost all the screw, except next to sd card slot (bottom left corner of the sd card slot)...This screw fix the main board and you can remove the back cover without remove this screw.
Put the battery to right position and fix it with rubber ring to the phone.
Prepare with the flash tools and rom, for flashing...(usb cable conect to the pc, scatter file etc...)
Start the flashing with the downlad button and inmediatly sort the spot with the motherboard screw (what you didn't remove) with the wire.
Waiting for the green circle! And Enjoy!
Pls let me know if you successful!
The problem was i think...There is two different mainboard in Inew i2000 the v1.1 and the v2.1...The newer stock roms belongs to second.
Here is a KitKat THEMED (it's just 4.2.1) rom: http://www.4shared.com/zip/WHdOpLytba/07_resurrection_feelKat.html
(little bit lightweighted and optimized) It's for PCB v1.1
First time do not going to panic...First time boot will be slow...and after that the system need 15 min for find myself...Wait for it!
Here is the lastest CWM based touch recovery
http://www.4shared.com/file/3qNEh_3Vce/recovery.html
Best Regards
Click to expand...
Click to collapse

Hello Again!
For the recovery you do not need new scatter file, use the original.
You can install the new rom from CWM recovery.
So let's see the problem.
First i need that error messages, it's important!
Try to use different usb cable/usb port/computer (operation system).
And different version of Flashtools.
I use this:
http://www.4shared.com/zip/CBA1yGcq/SP_Flash_Tool_v313040119.html
And this drivers:
http://www.4shared.com/zip/TPj497mj/6577driver_install_3_steps.html
But i need the error codes...Meanwhile you can contunie trying. We will save that phone!
Best Regards

Thanks again.
I'm already using this version of Flashtool. I'll try your drivers as well.
I might have some more question later on, but for now I think I need to try again when I've slept a bit. Maybe things will seems clearer tomorow I'll keep you updated later this week end.
Skot78 said:
Hello Again!
For the recovery you do not need new scatter file, use the original.
You can install the new rom from CWM recovery.
So let's see the problem.
First i need that error messages, it's important!
Try to use different usb cable/usb port/computer (operation system).
And different version of Flashtools.
I use this:
http://www.4shared.com/zip/CBA1yGcq/SP_Flash_Tool_v313040119.html
And this drivers:
http://www.4shared.com/zip/TPj497mj/6577driver_install_3_steps.html
But i need the error codes...Meanwhile you can contunie trying. We will save that phone!
Best Regards
Click to expand...
Click to collapse

kaceps said:
Thanks again.
I'm already using this version of Flashtool. I'll try your drivers as well.
I might have some more question later on, but for now I think I need to try again when I've slept a bit. Maybe things will seems clearer tomorow I'll keep you updated later this week end.
Click to expand...
Click to collapse
Okay, keep me in touch! I will help if i can!
And will check de error codes pls!
Skot

Skot78 said:
Okay, keep me in touch! I will help if i can!
And will check de error codes pls!
Skot
Click to expand...
Click to collapse
Quick update.
On device manager, the phone appear under "Ports com and LTP" as "MTK USB Port (com12)" Or other port number if I use other USB ports.
The error message I sometime get is BROM ERROR : S_PORT_COM_OPEN_FAIL (1013)
[COM] Failed to open port COM12
Wether I get the message or not depends on the order I do thing. ( Plus phone first, load after, or load and plug after ...)
So far, same reaction as always. The red progress bar goes to 100% very quicky, then nothing more happens.
EDIT ;
YES ! Phone résurected !
What I did :
phone not pluged, test points already connected
Windows -> write memory.
Go to tab Write memory
Open raw data -> select preloader.bin
select EMMC
Adress 0x0000000000
length 0x00600000
Write
Plug phone (with test point already connected)
The prelaoder gets written -> green circle.
unplug phone
After that back to main tab
select scater file from the same image, clic firmware upgrade
connect phone
Loading goes through ...
Green circle,
Phone switch on -> Success !
Thanks a lot, I will now try to flash the CWM recovery and the rom you recommended ... but later.
Right now my phone can boot again, and that's awesome !

kaceps said:
Quick update.
On device manager, the phone appear under "Ports com and LTP" as "MTK USB Port (com12)" Or other port number if I use other USB ports.
The error message I sometime get is BROM ERROR : S_PORT_COM_OPEN_FAIL (1013)
[COM] Failed to open port COM12
Wether I get the message or not depends on the order I do thing. ( Plus phone first, load after, or load and plug after ...)
So far, same reaction as always. The red progress bar goes to 100% very quicky, then nothing more happens.
Click to expand...
Click to collapse
Yikes!
Looks like, there is only usb driver related or op system related problem. (for this moment)
I looking for different driver and give it a try.
tonight...

Lol, you must have answered while I was editing my post.
As I said, Phone resurected ! Success !
It is now booting normally, with a stock rom.
Next steps are
1 / CWM + the rom you suggested.
2 / Fix memory to use the whole memory on one system partition. (It seems the i2000 for some reason does not use all the available memory.)
But all that is not problematic anymore. I just need the time to get to it
Many thanks for your precious help, I wouldn't have been able to do it without you.
Skot78 said:
Yikes!
Looks like, there is only usb driver related or op system related problem. (for this moment)
I looking for different driver and give it a try.
tonight...
Click to expand...
Click to collapse

Aswome!
Congratulations!
http://www.4shared.com/mobile/C4f0jQeEce/meteos-mtk6589-rom-edit-8gb-16.html
It's an apk for repartitioning your memory! Use only maximum 1,5 GB system memory options!
After that you must reflash the rom of course and your internal sd will cleared too!
But not the cwm recovery!
I'm happy now!

Get the 2.7 GB of memory on one partition ... OK
Get more available memory ... nope. Not sure it is actually possible on my version.
CWM ... OK
insall the kitkat themed rom you gave ... I don't know.
Skot78 said:
First time do not going to panic...First time boot will be slow...and after that the system need 15 min for find myself...Wait for it!
Click to expand...
Click to collapse
How long exactly ? Because I think the 4 color moving logo has been displayed for 15 minutes now.I know first boot can be long ... but at what point do I decide the phone is not just slow booting but actually stuck ?
Edit : Well, I'll stop at 30min I think.
But even if this one doesn't work for me, I would be interrested to know where you found custom roms for inew I2000 phone. I haven't been able to find a single one with google.

Hardbricked mtk6589 device,i more like to live dangerously ,but serious,i never hardbricked my device,i have softbricked my sgy when i was trying compile my custom kernel XD
Sent from my N986 using xda premium

kelvinvalencio said:
Hardbricked mtk6589 device,i more like to live dangerously ,but serious,i never hardbricked my device,i have softbricked my sgy when i was trying compile my custom kernel XD
Sent from my N986 using xda premium
Click to expand...
Click to collapse
Well, depends on what you call hardbrick and soft brick.
I bricked it using only software. So, it's soft.
But I had to open it and attach a wire to the motherboard to unbrick it ... so kinda hard to.

kaceps said:
But even if this one doesn't work for me, I would be interrested to know where you found custom roms for inew I2000 phone. I haven't been able to find a single one with google.
Click to expand...
Click to collapse
Eh it's will be difficult, you know i customized that rom... Because i did not found too. It was not a really rom develpoment just kind a "patchwork"...
The problem is, you have (i think) v2.1 board in your Inew I2000...In Hungary...one company sold v1.1 verzion...it called "Myaudio 508"...
For the v2.1 i have only stock rom...
But i did only few imporvements....Working GPS (with hw modding too) not blurry cam (hw too) different launcher, customized bootanim, different (and less) system ringtones and notifications. Some build.prop tweaking...etc...etc...
I try to make 4.2.2, because i have a working version, but still have two bugs, but that harder bugs and my phone sadly dead.
http://forum.xda-developers.com/showthread.php?p=50010654
My motherboard have a contact issue and i cant find replacement anywhere...I asked chinese factories...i asked russian fans...nothing
I'm a sad panda now...And looking for new phone...There are few new very intresting phones!
But if you want ask anything...just do it! if i can, i will help..

Is it possible from battery date 2013.02.25 and green sticker below battery with 2013 05 checked to tell which exactly preloader I need for this bricked phone (quad core)? I tried various sp flash tools versions and various roms dated 2013 03 16, 2013 05 10, 2013 07 06, tried to download only preloader or full rom with variuos errors, usually 4001 and 4032, now only shortening the point method left, but how do I know which exactly preloader I neeed?

Japetas said:
Is it possible from battery date 2013.02.25 and green sticker below battery with 2013 05 checked to tell which exactly preloader I need for this bricked phone (quad core)? I tried various sp flash tools versions and various roms dated 2013 03 16, 2013 05 10, 2013 07 06, tried to download only preloader or full rom with variuos errors, usually 4001 and 4032, now only shortening the point method left, but how do I know which exactly preloader I neeed?
Click to expand...
Click to collapse
You shold check the motherboard version number...Already i know two versions of this phone...The v1.1 and the v2.1...
For the flashtools the firmware names contain "_21" or "_v21"...In previous posts i linked a v21 rom. If you need the older one...i don't have v1.1 rom for flashtools now (because my phone is dead) but you can use the "spot method" and cmw rom + zip firmware form.
Best Regards

Inew I2000 Brikado
Inew I2000 5.7, Mtk6589, 8G. Updated the ROM and correct at all right Flastool plus the smartphone does not turn on and no battery carrega.Vi not the other members had the same problem.

Preciso de ajuda Inew I2000 brickadi
aloizo celso alves cardos said:
inew i2000 5.7, mtk6589, 8g. Updated the rom and correct at all right flastool plus the smartphone does not turn on and no battery carrega.vi not the other members had the same problem.
Click to expand...
Click to collapse
alguem pode me ajudar?
Fiz a atualizacao de rom do inew i2000 5.7 8g com flastool e correu tudo bem, vermelho, rixo, amarelo e verde ok., agora o smart nao liga esta brickado.
Por favor me explique como fazer o metodo de teste da placa mãe, onde tenho que fixar o arame?

Im partition my 8 gb sd card into 6gb 2gb . I want to repartition that is i want to recover my sdcard fully 8gb that is single 8gb . What can i do?? Thanks in advance..
Sent from my GT-S6102 using XDA Free mobile app

R7 PlusM doesn't boot properly anymore

Hi there, I have tried to find a solution today for this issue but I can't find anything useful anywhere .
Last night I received another update via OTA 151115 and proceed to install it as the earlier ones didn't work. Surprisingly this one worked and after restart my phone didn't had any trace of google apps on it, try to install google play, framework and so but the phone says it's not compatible with google (Big time). Then I went to the bootloader to perform a wipe/erase everything and here's when the problem began, it was stuck in the screen that says optimising applications (the one before starting the setup) and after half an hour unattended the phone restart itself one after another, like in a loop.... From this point on, I haven't been able to power on the device anymore.
It was bought through a third party seller from China, already contacted them and waiting for an answer...
Any clue about what can I do to use my phone again?
Update: I can see the oppo logo after pressing volume up plus power buttons for around 15 seconds but it shows for less than a second the screen it appears when it's updating the software and then it switches itself off... Is this a sign of possible recovery in some way?
just downloaded the last 151115 official update from the oppo community forum but I've got a problem. I can not enter the fasboot or recovery mode because the phone is like trying to install something and it constantly switches itself off... The day this happened, I had two files in my root directory, one was the few update and the other was a full Google thing in the same format than the fw file, I'm afraid I selected the wrong one and that's why the phone went crazy. I guess if there's some way to cancel that attempt to update the wrong file or reset that thing in some way, I'd be able to start over but I can't find anything grgrgr
By the way, the last ota update allowed google maps to work flawlessly and also Instagram, two of my biggest concerns with the phone
I'm even trying to contact oppo service to send the thing and sort it out that way xx
Cheers
Pedro

I've just contacted Oppo Customer Service in Europe to see if they have any solution for my problem as I can't make this thing to start and the battery also doesn't seems to be charging though... No response for the moment, just an automated one confirming the reception of my enquiry
Should I start thinking about my lovely new phone as my new paper weight?

peterpanda1970 said:
I've just contacted Oppo Customer Service in Europe to see if they have any solution for my problem as I can't make this thing to start and the battery also doesn't seems to be charging though... No response for the moment, just an automated one confirming the reception of my enquiry
Should I start thinking about my lovely new phone as my new paper weight?
Click to expand...
Click to collapse
No, no you have a chance to save your phone. If you have to R7 plus M Oppo Chinese version, I can help you. I also had this problem, but he was able to solve it. My Skype: ed_mobstyle.

Hi mate, thanks for the answers. Yes it is the China mobile version "M" I don't have Skype I'm afraid grgrgr
Cheers
Pedro

I was able to fix this problem fairly easily.
First I entered recovery (press Power + Volume Down when the phone is booting up)
Then from the device menu I installed a ROM, you want to download the version you last used. (MAKE SURE IT IS FOR THE OPPO R7 PLUS M)
After installing the stock rom, it will go into installation and have you set up your phone.
After you installed the ROM, download OPPO tools v 1.6.5
Open Oppo Tools and root your phone this will take a few minutes.
After you have rooted your device open Oppo Tools again and select Unlock Google Mobile Services (this too me two weeks to figure out).
Let the phone restart, after it is finished, you should have basic google functionalities (Playstore and Frameworks).
Now since you are rooted, it means that your phone will not download any further OTAs and you will have to install them as ROMs, you can do so by repeating the above process, but I'm not sure of the functionality of Oppo Tools past the most current version.
I cant post links to provide you to where the ROM files and Oppo Tools are at this moment
The roms will be located on the "[ROM][STOCK] Official R7 Plus Roms | R7Plus, R7PlusF, R7PlusM [15 Sep 2015]" of Oppo Fourms
The Oppo Tools will be located when you google "OPPO Tools apk" on your computer and it will take you to the thai version of Oppo Fourms follow the link there to download the apk

Hi mate, thanks for your answer but my problems is that I can't enter the recovery mode cause the phone try to install something and then it switches itself off
I've tried to connect the phone to my laptops and sometimes they recognised it as Qhsub something and I can't find anywhere this driver. Then all the softwares I've got ask me for a scatter file which I don't have....
Also trying to contact support from the brand. For now just send them my data and the phone's imei and now waiting for the magic response... They are excessively slow in their answers!
Thanks so much anyway
Cheers
Pedro

hi mate I guess un the malysia oppo community you can fin the drivers and every things about oppo r7pkusM

sollitair said:
hi mate I guess un the malysia oppo community you can fin the drivers and every things about oppo r7pkusM
Click to expand...
Click to collapse
Just checked in and didn't find anything but the bloody oppotools lol.
Cheers mate!

so please if you still with the same problem let me know I'll try to write an email directly to you with all
links you need for it.
[email protected]
best of luck

Still at the same point mate! The thing keeps on trying to install something and switches itself off. My windows laptop runs on win10, the other is a Mac so I guess useless for this matters... The battery runs out faster than ever even being off. Disaster! Lol
I would really appreciate your help
Cheers
Pedro

This is a video I made to explain how this thing try to boot and it never makes it further...
https://www.youtube.com/watch?v=2LNiWODlUd0

Hi matr
believe me I have just coming back from oppo office and I show them your video and what they said '' you have to change it with the guarantee you have''.
it clear now for me and I state that I had the same problem all what I did is installing the oppo drivers on my PC boot on fastboot mode give some commands to unlock it and tjen I flash the original recovery from oppo then tje coloros was installed and updated as well before flashi'g again TRWP recovery and right now I''m writing to you from my r7plusm it's work smothly rooted with the same original oppo rom coloros.
I hope that your just missing something and let me know to to follow you step by step on this.
cheers P

sollitair said:
Hi matr
believe me I have just coming back from oppo office and I show them your video and what they said '' you have to change it with the guarantee you have''.
it clear now for me and I state that I had the same problem all what I did is installing the oppo drivers on my PC boot on fastboot mode give some commands to unlock it and tjen I flash the original recovery from oppo then tje coloros was installed and updated as well before flashi'g again TRWP recovery and right now I''m writing to you from my r7plusm it's work smothly rooted with the same original oppo rom coloros.
I hope that your just missing something and let me know to to follow you step by step on this.
cheers P
Click to expand...
Click to collapse
Hi mate, my problem is that my computer detects the phone as qhsusb_bulk and I've tried every single file I found with that name and nothing changes, well, the device name from unknown to com1, com2... up to com13 I have seen.... Other thing is that I can't enter the fastboot mode or recovery mode neither. I wish I had an oppo service near home but I live in Uk, now I'm trying to get service from oppostyle and waiting for an answer. To be honest with you, I'm really annoyed with all this, never had a problem with bricked androids or iphones until I met this "guy" lol
Cheers
Pedro

I'm really sorry dude I hope I can help you as I did for mine it was quit simple with the same driver problems,so try to uninstall all drivers you have for oppo and install the one I shared with you taken from my ohone directly that the only way you can give any commands to your phone to switch to fastboot mode even if the problem still present

when I try to install the driver on my win10 laptop it says this...

Using an old win7 laptop I managed to install the bloody Qhsub driver and now the phone appears in the com ports under the name Qualcomm HS-USB QDLoader 9008 (COM4) does this means the phone really doesn't exist?

Update to this thread, I can't do anything until I find a proper driver for the phone which actually is recognised by my laptop as Qhsub_bulk and I can't bloody find this anywhere at least for making 6795 processors or specifically for this model...
Any clue?

peterpanda1970 said:
Update to this thread, I can't do anything until I find a proper driver for the phone which actually is recognised by my laptop as Qhsub_bulk and I can't bloody find this anywhere at least for making 6795 processors or specifically for this model...
Any clue?
Click to expand...
Click to collapse
No need panic ))) I've sent you a set for recovery your device )))) Good luck

ed_mobstyle said:
No need panic ))) I've sent you a set for recovery your device )))) Good luck
Click to expand...
Click to collapse
Hi mate, thanks for your help. Tried to open the link you sent me but it says it's not available anymore grgrgr
Cheers
Pedro

peterpanda1970 said:
Hi mate, thanks for your help. Tried to open the link you sent me but it says it's not available anymore grgrgr
Cheers
Pedro
Click to expand...
Click to collapse
Hi, please check now