On my I535 I have this is Odin:
Odin Mode
Product Name: SCH I535
Custom Binary Download: NO
Current Binary: Samsung Official
Qualcom Secureboot: Enable
Warrenty Bit: 1
Bootloader AP SWREV: 1
Baseband Version: i535VRUCML1
Can someone tell me if I have KNOX?
And if someone can tell me if there doing a safestrap for I535?
*I did take the Official 4.3 download.*
*I did use the W0lfDroid root method.*
DJBurner said:
On my I535 I have this is Odin:
Odin Mode
Product Name: SCH I535
Custom Binary Download: NO
Current Binary: Samsung Official
Qualcom Secureboot: Enable
Warrenty Bit: 1
Bootloader AP SWREV: 1
Baseband Version: i535VRUCML1
Can someone tell me if I have KNOX?
And if someone can tell me if there doing a safestrap for I535?
*I did take the Official 4.3 download.*
*I did use the W0lfDroid root method.*
Click to expand...
Click to collapse
I think your knox counter was tripped (yes, you have it) and no, there is no safestrap available for this phone model.
If you're on the ml1 base you're stuck with root only. Any attempt to downgrade or flash a custom recovery will result in a softbrick.
Sent from my SCH-I535 using Tapatalk 2
Thank you
BadUsername said:
I think your knox counter was tripped (yes, you have it) and no, there is no safestrap available for this phone model.
If you're on the ml1 base you're stuck with root only. Any attempt to downgrade or flash a custom recovery will result in a softbrick.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Ohh well Its not like i get this phone Verizon I was the Smart person who still has Unlimited data.
BadUsername said:
I think your knox counter was tripped (yes, you have it) and no, there is no safestrap available for this phone model.
If you're on the ml1 base you're stuck with root only. Any attempt to downgrade or flash a custom recovery will result in a softbrick.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Can the warranty bit (at least as it's shown in Odin mode) be set or reset from 1 to 0?
TwistedPoet said:
Can the warranty bit (at least as it's shown in Odin mode) be set or reset from 1 to 0?
Click to expand...
Click to collapse
Nope, not the warranty bit, only the flash count.
Sent from my HTC6525LVW using Tapatalk
BadUsername said:
Nope, not the warranty bit, only the flash count.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
I was afraid of that. I need to send the device back to Verizon but soon as they see that they'll charge me something outrageous. Well, at least I know not to pay for the warranty coverage anymore. Thanks for you quick reply!!!
Related
I would like to report that at least we have SUCCESSFULLY flashed and rooted MJ7 UK firmware using Mobile Odin Pro 3.85.
This is for the SM-N9005 Qualcomm Snapdragon model.
We were originally rooted on MJ1 by using Root de la Vega, with Knox 0x0, which made the Mobile Odin flash possible.
SUCCESSFUL FIRMWARE VERSIONS ROOTABLE: MI7, MJ1, MJ3
UNSUCCESSFUL ROOT :MJ6 and later
NOTE: THIS DOES NOT RESET YOUR KNOX if it is 0x1.
Originally reported in a Malaysia forum here: - XDA user williamyi (WiLyi on Lowyat.net forum) was the first user to report trying this method with success. Thank him in post 2 !!
Success 1 - williamyi
https://forum.lowyat.net/index.php?showtopic=3020868&view=findpost&p=64477527
Success 2 - joytest
https://forum.lowyat.net/index.php?showtopic=3020868&view=findpost&p=64477946
Success 3
https://forum.lowyat.net/index.php?showtopic=3020868&view=findpost&p=64482052
Success 4
https://forum.lowyat.net/index.php?showtopic=3020868&view=findpost&p=64493286
Success 5
https://forum.lowyat.net/index.php?showtopic=3020868&view=findpost&p=64494080
Knox remains 0x0
All we need to do is to to reinstall Xposed and its mods.
Thanks @Chainfire !!!!!
Many other XDA users are also now reporting success by flashing to MJ7 using this method.
Steps: (thanks to WiLyi of Lowyat.net forum) aka @williamyi in XDA
1. Download UK MJ7 firmware.
2. Extract the tar.md5 (I placed in internal SD - not sure if this make any differences)
3. Open the tar.md5
4. Check:
i. Everroot
ii. Inject SuperSU
iii. Inject Mobile Odin
5. Flash
NOTE: Mobile Odin will throw a standard warning about tripping Knox. That can be ignored (we did). Remember to tick Everroot so that you will be rooted immediately upon flashing.
NOTE: Mobile Odin "A compatible device was detected, but with an unexpected partition layout. Mobile ODIN cannot operate. This is a common error on CM and MIUI ROMs on some devices."
This can be solved by uninstalling and reinstalling SuperSU or its updates.
joytest said:
I would like to report that at least 2 users have SUCCESSFULLY flashed and rooted MJ7 UK firmware using Mobile Odin Pro 3.85.
More to come as it was reported in a Malaysia forum here
Success 1
https://forum.lowyat.net/index.php?showtopic=3020868&view=findpost&p=64477527
Success 2
https://forum.lowyat.net/index.php?showtopic=3020868&view=findpost&p=64477946
Knox remains 0x0
All we need to do is to to reinstall Xposed and its mods.
Thanks @Chainfire !!!!!
Steps: (thanks to WiLyi of Lowyat.net forum)
1. Download UK MJ7 firmware.
2. Extract the tar.md5 (I placed in internal SD - not sure if this make any differences)
3. Open the tar.md5
4. Check:
i. Everroot
ii. Inject SuperSU
iii. Inject Mobile Odin
5. Flash
Click to expand...
Click to collapse
You beat me on posting this. Hopefully this could help those who which to update to latest firmware without tripping the Knox. Happy flashing everyone
But you can't run mobile odin without root it says?
Sent from my SM-N9005 using Tapatalk
Drizzy xS said:
But you can't run mobile odin without root it says?
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
I had initially rooted with the Root de la Vega method, and Knox was still 0x0. I wanted to test a newer ROM MJ7 so after @williamyi had succeeded I tried as well.
We're all happy campers now.
Drizzy xS said:
But you can't run mobile odin without root it says?
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
I have rooted the firmware using Root De La Vega since day the early days and gotten the root access without tripping the knox.
This time I flash the UK's MJ7 firmware using Mobile Odin Pro 3.85 and successfully update the firmware from the first MJ1 to the latest MJ7 without tripping the knox as shown in the first link in the first post
joytest said:
I had initially rooted with the Root de la Vega method, and Knox was still 0x0. I wanted to test a newer ROM MJ7 so after @williamyi had succeeded I tried as well.
We're all happy campers now.
Click to expand...
Click to collapse
Dam is there no way to root mj7? I tried to root it using odin and URDLV but every time I try I get the odin fail error and it doesn't work
Sent from my SM-N9005 using Tapatalk
*realised you need to be rooted first to be able to flash via mobile odin
Drizzy xS said:
Dam is there no way to root mj7? I tried to root it using odin and URDLV but every time I try I get the odin fail error and it doesn't work
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Maybe this guide will help
https://forum.lowyat.net/index.php?showtopic=3020868&view=findpost&p=64362662
credits @antt00
Will work only for people with old bootloader and yet rooted
geek78 said:
Will work only for people with old bootloader and yet rooted
Click to expand...
Click to collapse
Which firmware are you in now? As far as I know firmware later than BMJ1 comes with a new bootloader.
You may try to root it using URDLV first before flashing to later firmware using Mobile Odin. Alternatively you may try method in post 8
williamyi said:
Which firmware are you in now? As far as I know firmware later than BMJ1 comes with a new bootloader.
You may try to root it using URDLV first before flashing to later firmware using Mobile Odin. Alternatively you may try method in post 8
Click to expand...
Click to collapse
Thanks but it was not a question
For SM-N9005 only
Please do mention that it is only for SM-N9005 only. I hope that N900 gets some good stuff as well
um009 said:
Please do mention that it is only for SM-N9005 only. I hope that N900 gets some good stuff as well
Click to expand...
Click to collapse
Ok done.
joytest said:
Ok done.
Click to expand...
Click to collapse
Also add that this is tested on MJ1 bootloader only. URDLV will definitely trip MJ3 bootloader and above. Dunno about MOP.
Add another to the success stories, still had/have the MJ1 bootloader, now up to MJ7.
Sent from my SM-N9005 using Tapatalk
awww I was actually hoping you mean like flashing a recovery or kernel with mobileodin and keeping the knox 0x0 ;P... too much wishful thinking I guess.....
I was running MI7 firmware with root but after flashing to MJ8 firmware, I lost root. Knox is still 0x0
Can I downgrade the firmware back to MI7 and root it again with RDLV method and then use mobileodin to update firmware?
MCube74 said:
I was running MI7 firmware with root but after flashing to MJ8 firmware, I lost root. Knox is still 0x0
Can I downgrade the firmware back to MI7 and root it again with RDLV method and then use mobileodin to update firmware?
Click to expand...
Click to collapse
MJ8? Are you using HK firmware? Not sure if the bootloader is the same in MJ7 or not, but if they are using a new bootloader, then I believe there is no way to downgrade the bootloader
MCube74 said:
I was running MI7 firmware with root but after flashing to MJ8 firmware, I lost root. Knox is still 0x0
Can I downgrade the firmware back to MI7 and root it again with RDLV method and then use mobileodin to update firmware?
Click to expand...
Click to collapse
No..you cannot as you already have new bootloader when your flash the MJ8 firmware. Even if you use RDLV..you will still trip your Knox as RDLV meant to those who still on the old bootloader.
MCube74 said:
I was running MI7 firmware with root but after flashing to MJ8 firmware, I lost root. Knox is still 0x0
Can I downgrade the firmware back to MI7 and root it again with RDLV method and then use mobileodin to update firmware?
Click to expand...
Click to collapse
If you flashed the MJ8 file as it comes straight from Samsung then no, you can't downgrade without triggering the Knox counter.
If it was a URDLV version then yeah.
Sent from my SM-N9005 using Tapatalk
So I just got a refurb'd gs3 and I checked the apps and it doesn't appear to have Knox, but it's on 4.3? It says it's on build JSS15J.I535VRUCML1 and that the baseband is ML1, but there doesn't appear to be knox on it. Also, when I boot to recovery or whatever, it says Bootloader SWREV: 1 or something like that. Is it safe to assume that it was previously unlocked and I can install a custom rom or something? I was gonna try the standard saferoot at first.
Swagulous said:
So I just got a refurb'd gs3 and I checked the apps and it doesn't appear to have Knox, but it's on 4.3? It says it's on build JSS15J.I535VRUCML1 and that the baseband is ML1, but there doesn't appear to be knox on it. Also, when I boot to recovery or whatever, it says Bootloader SWREV: 1 or something like that. Is it safe to assume that it was previously unlocked and I can install a custom rom or something? I was gonna try the standard saferoot at first.
Click to expand...
Click to collapse
Knox is there and your bootloader is still locked. You have to root with saferoot. Everything you need is here:
http://forum.xda-developers.com/showthread.php?t=2639337
Sent from my SCH-I535 using Tapatalk 2
i am thinking to get the s6 and i dont think i can give up on root so i heard there is a root method pingpong does not trip knox if i do it
can i install custom recovery on it without tripping knox or anything else on download mode
if i restore to stock will everything stays the same?
thank you in advance
You can root without tripping the KNOX with Ping Pong Root , but if you flash unsigned software like custom recovery or custom ROM the knox will trip and you will loose the warranty.
Vixa said:
You can root without tripping the KNOX with Ping Pong Root , but if you flash unsigned software like custom recovery or custom ROM the knox will trip and you will loose the warranty.
Click to expand...
Click to collapse
if i install TWRP through the phone will it trip knox ?
installing XPOSED?
sorry for these stupid questions but i need to know the safe sides of modding the phone
Iloudsan said:
if i install TWRP through the phone will it trip knox ?
installing XPOSED?
sorry for these stupid questions but i need to know the safe sides of modding the phone
Click to expand...
Click to collapse
Your answer is in post number 2
Iloudsan said:
if i install TWRP through the phone will it trip knox ?
installing XPOSED?
sorry for these stupid questions but i need to know the safe sides of modding the phone
Click to expand...
Click to collapse
I am talking about using flashify to flash twrp not odin
Iloudsan said:
if i install TWRP through the phone will it trip knox ?
installing XPOSED?
sorry for these stupid questions but i need to know the safe sides of modding the phone
Click to expand...
Click to collapse
Xposed does not work on 64bit
Sent from my SM-G920F using Tapatalk
There is something strange about knox. I flashed BTU(UK) stock ROM on my XXV(vietnam) SM-920F brand new phone using odin 3.10.6. And hell, knox is tripped now. Strange? Anybody any clues?
sstiwari said:
There is something strange about knox. I flashed BTU(UK) stock ROM on my XXV(vietnam) SM-920F brand new phone using odin 3.10.6. And hell, knox is tripped now. Strange? Anybody any clues?
Click to expand...
Click to collapse
I'm so glad i saw this, i was about to do the same. Got all my backups ready to flash and wipe to change the CSC to BTU (from EVR). So your KNOX has tripped, how was this confirmed?
Were you able to do anything since tripping it?
Thanks
sohail_ahmad said:
I'm so glad i saw this, i was about to do the same. Got all my backups ready to flash and wipe to change the CSC to BTU (from EVR). So your KNOX has tripped, how was this confirmed?
Were you able to do anything since tripping it?
Thanks
Click to expand...
Click to collapse
Nothing much. Once knox is tripped. Its tripped. There is nothing one can do about it.
Can I Update S6 via Odin
I have S6 (SN-G92F)
Made in Vietnam
Original CSC code "ECT"
Active CSC code "ECT"
Knox Warranty void 0*0
CSC Country Nigeria/NG
CSC version
G920FOJV1AODE
Android version 5.0.2
When I tried to OTA update, it shows "already latest OS installed"
I have tried to update it through smart switch, but it updated to the same version.
I have checked in sammobile that 5.1.1 stock available for the same CSC of Nigeria.
Can I update my mobile to 5.1 through odin with out Knox trip.
Knox tripping is very important for me.
any one can help me
i have galaxy s7 ( sm-g930f), is it safe installing the nougat of UK ( BTU ), it won't affect my warranty ? because i will take my phone in few weeks to after sale services to fix camera problem
please help
No it won't. Knox pass warranty is only when you flash custom rom or when you root the rom. No warranty broken when Samsung officiel rom is flashed.
You can flash nougat without issue.
Alex93917 said:
No it won't. Knox pass warranty is only when you flash custom rom or when you root the rom. No warranty broken when Samsung officiel rom is flashed.
You can flash nougat without issue.
Click to expand...
Click to collapse
also my phone originally isn't BTU it is WTL so it won't be there any issues ?
With my phone, XEF is still my CSC after flashing Nougat then... Maybe you will be still with WTL maybe BTU. But the CSC can be changed by reflashing other odin package.
Keep BTU is not a problem, you will still get updates.
Alex93917 said:
With my phone, XEF is still my CSC after flashing Nougat then... Maybe you will be still with WTL maybe BTU. But the CSC can be changed by reflashing other odin package.
Keep BTU is not a problem, you will still get updates.
Click to expand...
Click to collapse
Thanks ! I will flash it right now
Alex93917 said:
With my phone, XEF is still my CSC after flashing Nougat then... Maybe you will be still with WTL maybe BTU. But the CSC can be changed by reflashing other odin package.
Keep BTU is not a problem, you will still get updates.
Click to expand...
Click to collapse
Everything is working just fine, but S Health app telling me: Your device has been compromised. Because of new security policy introduced in version 5.0, knoxis not availble on compromised devices. ( 0x100050521)
in the download mode: everything is okay just like flashing the 7.0
Strange... No problem on my phone. Try to do a hard reset.
Kimo72RS said:
Everything is working just fine, but S Health app telling me: Your device has been compromised. Because of new security policy introduced in version 5.0, knoxis not availble on compromised devices. ( 0x100050521)
in the download mode: everything is okay just like flashing the 7.0
Click to expand...
Click to collapse
Hi
Is your knox tripped??
Seems that Samsung is limiting some apps if you tripped knox
MAX 404 said:
Hi
Is your knox tripped??
Seems that Samsung is limiting some apps if you tripped knox
Click to expand...
Click to collapse
how do I know if it is tripped or no ? all i did is flashing the AP of UK in my phone
Kimo72RS said:
how do I know if it is tripped or no ? all i did is flashing the AP of UK in my phone
Click to expand...
Click to collapse
Did you ever root your device? if so knox is tripped
MAX 404 said:
Did you ever root your device? if so knox is tripped
Click to expand...
Click to collapse
i never rooted my device, and my warranty void is: 0x0
Kimo72RS said:
i never rooted my device, and my warranty void is: 0x0
Click to expand...
Click to collapse
Ok
Your problem is not knox....try flashing again
MAX 404 said:
Ok
Your problem is not knox....try flashing again
Click to expand...
Click to collapse
When I flash, should I add CSC and CP and BL files or only AP file ?
Omg yes, flash all the files.
You have to flash all 4 files, ignore just the home_csc.
Bl
Ap
Cp
Csc_
Sent from my SM-G930F using Tapatalk
KoRoZIV said:
Omg yes, flash all the files.
You have to flash all 4 files, ignore just the home_csc.
Bl
Ap
Cp
Csc_
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
Even, i had the same problem, so i downgraded to 6.0.1
So I'm trying to unroot my S8. It's a verizon variant, G950U. I have partcyborg ROM installed, along with safestrap and TWRP.
I am using stock Odin 3.12 and it keeps giving me this message no matter what I do. (<OSM> All threads completed. (succeed 0 / failed 1))
I have tried using the latest USC firmware found on updato and no dice.
I have tried using the latest VZW firmware found on updato and no dice.
I cannot use chainfire because I have lost root and cannot get it back (SU binaries occupied)
I have tried extracting the PIT file and flashing that, no dice.
I'm really at a loss. I thought it would be easy peezy, just put it in download mode, flash BL, AP, CP and be done with it, but I'm not having any luck.
Any ideas on how to get me back to stock?
Did you try a modified odin? I've never rooted, but it seems like I've read that somewhere.
Sent from my SM-G950U using Tapatalk
fish2222 said:
Did you try a modified odin? I've never rooted, but it seems like I've read that somewhere.
Sent from my SM-G950U using Tapatalk
Click to expand...
Click to collapse
I tried Cosmy Odin but no dice either.
Here is what DL mode says when I put it into DL mode.
CARRIER: VZW
RPMB fuse blown
RPMB PROVISIONED
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
FRP LOCK: ON
QUALCOMM SECUREBOOT: ENABLE
RP SWREV: B2(1,1,1,1,1) K1 S2
SECURE DOWNLOAD: ENABLE