[SOLVED] Can i install a RUU Asia WWE 1.73.707 in my Sens XE if my CID is HTC_622? - HTC Sensation

I was looking for a stock signed RUU for my sensation XE, but i cant find the exact RUU for my CID (HTC_622), i just find a RUU for HTC Asia WWE and Asia Tawain, but my CID is Asia-HK-CHT.
Can i install this WWE RUU without fear?
Thanks
This is the RUU that i find.
RUU_Pyramid_LE_hTC_Asia_WWE_1.73.707.4_Radio_10.58.9035.00U_10.15.9035.02_2_release_220848_signed.exe
From http://www.persianhtc.net/index.php?dir=Sensation(Pyramid)/rom/original/EXE/

vackayjo said:
I was looking for a stock signed RUU for my sensation XE, but i cant find the exact RUU for my CID (HTC_622), i just find a RUU for HTC Asia WWE and Asia Tawain, but my CID is Asia-HK-CHT.
Can i install this WWE RUU without fear?
Thanks
This is the RUU that i find.
RUU_Pyramid_LE_hTC_Asia_WWE_1.73.707.4_Radio_10.58.9035.00U_10.15.9035.02_2_release_220848_signed.exe
From http://www.persianhtc.net/index.php?dir=Sensation(Pyramid)/rom/original/EXE/
Click to expand...
Click to collapse
post the output of this command
fastboot getvar all
remove your imei and serial number

rzr86 said:
post the output of this command
fastboot getvar all
remove your imei and serial number
Click to expand...
Click to collapse
Thanks a lot. I try install and it works 100%, anyway i havent the adb drivers instaled, but my problem was solved, maybe becouse my CID was 11111111 before i install the RUU.
The moderator can delete this post if he want. :good::good::good:

vackayjo said:
Thanks a lot. I try install and it works 100%, anyway i havent the adb drivers instaled, but my problem was solved, maybe becouse my CID was 11111111 before i install the RUU.
The moderator can delete this post if he want. :good::good::good:
Click to expand...
Click to collapse
that's why i told you to show me the info
if you are supercid that means also that you are on S-OFF
with supercid you can use any ruu.exe you want:good:

rzr86 said:
that's why i told you to show me the info
if you are supercid that means also that you are on S-OFF
with supercid you can use any ruu.exe you want:good:
Click to expand...
Click to collapse
Yep my device was SuperCID and S-OFF, but i was trying restore him to stock with S-ON, unroot and without superCID. I did not know if i can install a official RUU if i was superCID, but the install have proceeded.
Edit: Show u the infos that u request is not problem. Was not because this. Dont be so bad :crying:

vackayjo said:
Dont be so bad :crying:
Click to expand...
Click to collapse
i wasn't bad

Related

[Q] wrong s-on with hboot 1.23 and cannot make super cid

hi friends
ı have a problem on radio flash. i cannot install ruu rom or flash radio to my sensation. hboot information of my phone:
unlocked
s-on
hboot 1.23.0000
radio 11.65
cid HTC_M27
I have tried so many ways for making super cid, flashing original ruu file and flashing radio. i have locked bootloder in order to flash ruu and i have tried two ruu file. these 3.25 europe ruu and 1.45 turkey ruu. When I install 3.25 ruu , I get the error wrong cid and when I install 1.45 ruu , I get the error hboot. in addition, when i make super cid i get fat error. is there any way for make super cid or change cid of ruu official rom.
please help.
You need to read up a bit and start again
http://forum.xda-developers.com/showthread.php?t=1192300
zahdekar said:
hi friends
ı have a problem on radio flash. i cannot install ruu rom or flash radio to my sensation. hboot information of my phone:
unlocked
s-on
hboot 1.23.0000
radio 11.65
cid HTC_M27
I have tried so many ways for making super cid, flashing original ruu file and flashing radio. i have locked bootloder in order to flash ruu and i have tried two ruu file. these 3.25 europe ruu and 1.45 turkey ruu. When I install 3.25 ruu , I get the error wrong cid and when I install 1.45 ruu , I get the error hboot. in addition, when i make super cid i get fat error. is there any way for make super cid or change cid of ruu official rom.
please help.
Click to expand...
Click to collapse
have you already tried step 4 here?
matt95 said:
have you already tried step 4 here?
Click to expand...
Click to collapse
yes ı tried repeatedly. but always ı get fat error in adb.
do you want to upgrade to 3.25 right?
---------- Post added at 12:48 AM ---------- Previous post was at 12:46 AM ----------
http://forum.xda-developers.com/showthread.php?t=1459767
look here...search HTC part 2...there is your cid HTC__M27 download 3.24 file and install it
yes ı want to update to 3.25 and install any radio.
zahdekar said:
yes ı want to update to 3.25 and install any radio.
Click to expand...
Click to collapse
i have found the 3.24 file try installing it and do supercid with that hboot
ok i tried. but not work. hboot is still 1.23
zahdekar said:
ok i tried. but not work. hboot is still 1.23
Click to expand...
Click to collapse
i think you already know it but just to be sure...you have to download the file i attached you before and then put that file on your sdcard and then reboot in bootloader....have you done so?
zahdekar said:
hi friends
ı have a problem on radio flash. i cannot install ruu rom or flash radio to my sensation. hboot information of my phone:
unlocked
s-on
hboot 1.23.0000
radio 11.65
cid HTC_M27
I have tried so many ways for making super cid, flashing original ruu file and flashing radio. i have locked bootloder in order to flash ruu and i have tried two ruu file. these 3.25 europe ruu and 1.45 turkey ruu. When I install 3.25 ruu , I get the error wrong cid and when I install 1.45 ruu , I get the error hboot. in addition, when i make super cid i get fat error. is there any way for make super cid or change cid of ruu official rom.
please help.
Click to expand...
Click to collapse
dude, you are s-on, you can't flash radios sorry. Shoulda used revolutionary.
yes i downloaded part 2, 3.24 zip file and placed root of sd card. flashed in fastboot.i got " wrong file or no file" error.
zahdekar said:
yes i downloaded part 2, 3.24 zip file and placed root of sd card. flashed in fastboot.i got " wrong file or no file" error.
Click to expand...
Click to collapse
are you sure that it is your cid? type this on cmd and tell me what it says: fastboot getvar cid (obviusly you have to be on fastboot mode)
Behold_this said:
dude, you are s-on, you can't flash radios sorry. Shoulda used revolutionary.
Click to expand...
Click to collapse
ok. but revolutionary dont support hboot 1.23.
matt95 said:
are you sure that it is your cid? type this on cmd and tell me what it says: fastboot getvar cid (obviusly you have to be on fastboot mode)
Click to expand...
Click to collapse
C:\android-sdk-windows\platform-tools>fastboot getvar cid
< waiting for device >
cid: HTC__M27
finished. total time: 0.003s
zahdekar said:
C:\android-sdk-windows\platform-tools>fastboot getvar cid
< waiting for device >
cid: HTC__M27
finished. total time: 0.003s
Click to expand...
Click to collapse
that's strange man...the one i provided should work...hmmm
zahdekar said:
ok. but revolutionary dont support hboot 1.23.
Click to expand...
Click to collapse
That's correct. You screwed yourself when you updated to ics firmware with s-on (or you set s-on after flashing though i can't figure out why). You are stuck for now until revolutionary supports the new hboot or until a new update that is supported comes out. You can now only upgrade, no downgrading for you, until s-off.
Behold_this said:
That's correct. You screwed yourself when you updated to ics firmware with s-on (or you set s-on after flashing though i can't figure out why). You are stuck for now until revolutionary supports the new hboot.
Click to expand...
Click to collapse
well if he could find the right fw witout supercid it could upgrade
Do I have to wait for the update of revolutionary? i can install custom 4.0.1 ice rom. but it is very slow and i cannot install official rom.
zahdekar said:
Do I have to wait for the update of revolutionary? i can install custom 4.0.1 ice rom. but it is very slow and i cannot install official rom.
Click to expand...
Click to collapse
Well I think revolutionary will not support that one... They are supporting the newer why support an older one?
Sent from my HTC Sensation XE with Beats Audio using Tapatalk
matt95 said:
Well I think revolutionary will not support that one... They are supporting the newer why support an older one?
Sent from my HTC Sensation XE with Beats Audio using Tapatalk
Click to expand...
Click to collapse
ok. thanks for help. if you find a way. please share on this post. OK?

stock rom fail

Hi,
I'm trying to go to the stock rom because I have to return my phone because I have battery problems and dust behind my screen.
But when I try to flash a stock rom it doesn't work. It says that I using the wrong image update.
Current image is 1.11.401.110 and I want to go to the lastest stock rom 3.32.401.105
What do I have to do?
Thanks
What was the original CID ? What CID do you now have ?
1.11.401....... wow that seems really old.
x.xx.401.... will need CID "HTC__001" or SuperCID "11111111".
What exactly does it say when you run the RUU ? Does it connect OK to the Sensation, does it say what the existing version is on the phone ?
gol_n_dal said:
What was the original CID ? What CID do you now have ?
1.11.401....... wow that seems really old.
x.xx.401.... will need CID "HTC__001" or SuperCID "11111111".
What exactly does it say when you run the RUU ? Does it connect OK to the Sensation, does it say what the existing version is on the phone ?
Click to expand...
Click to collapse
I at the moment I have SuperCID so '11111111'.
My sensation was connected correctly to the pc
And do you need my Hboot version or my firmware?
My Hboot: 1.27.1100
Firmware: 3.33 full package
Greetz
tommeke19 said:
I at the moment I have SuperCID so '11111111'.
My sensation was connected correctly to the pc
And do you need my Hboot version or my firmware?
My Hboot: 1.27.1100
Firmware: 3.33 full package
Greetz
Click to expand...
Click to collapse
OK I don't understand where 1.11.401.110.... figures in the situation. If I understand correctly that is a custom ROM based off a different platform with Sense 4.0. Probably wrong though..
Are you fully S-OFF (clutching at straws here). Assuming you are you should be able to install an RUU easily. I recently went from 3.32.161.... to 3.32.401.. then back to 1.27.161... with no issues at all.
I'm sure someone more able than me can help you here.
GL
tommeke19 said:
I at the moment I have SuperCID so '11111111'.
My sensation was connected correctly to the pc
And do you need my Hboot version or my firmware?
My Hboot: 1.27.1100
Firmware: 3.33 full package
Greetz
Click to expand...
Click to collapse
ok you are SOFF seeing that you have revolutionary HBOOT ..
so when returning stock ...its better to flash the correct stock...which can be found using CID
but as you have supercid now ...you need to know your original cid or the carrier/country the phone is linked to ..for finding the proper stock RUU
this guide helps you in fiding the proper stock RUU and it has flashing instructions too
Hi,
I followed the link and tried to get my CID but I only get 11111111 so i don't know what I have to download now
Install "cid getter" from the market.
AFAIK the entry for "ro.cid" should tell you your original CID.
e.g. It says VODAP001 for me while "fastboot getvar cid" gives "11111111".
tommeke19 said:
Hi,
I followed the link and tried to get my CID but I only get 11111111 so i don't know what I have to download now
Click to expand...
Click to collapse
from which country you bought the phone from and to which carrier it is linked to ?
Thanks everyone for helping me, but after using google I've found a site and found the solution.

Help Me Find

so i am S - OFF and need to run a RUU (long Story)
so when i ran the RUU it said please download the right rom utility update
this is the one i ran http://bugsylawson.com/files/file/3...00528-10275008l-release-301814-signed-2-4exe/
and i changed my CID to HTC__001 and also i can change back to SuperCID 11111111
i heard you have to have a ruu which is lower than your HBOOT my HBOOT:2.13.0000
what shall i do please ould someone help thanks
Zaman-The-Man said:
so i am S - OFF and need to run a RUU (long Story)
so when i ran the RUU it said please download the right rom utility update
this is the one i ran http://bugsylawson.com/files/file/3...00528-10275008l-release-301814-signed-2-4exe/
and i changed my CID to HTC__001 and also i can change back to SuperCID 11111111
i heard you have to have a ruu which is lower than your HBOOT my HBOOT:2.13.0000
what shall i do please ould someone help thanks
Click to expand...
Click to collapse
Since you are Soff I don't think it matters what hboot it is. You just have to run the RUU that matches the CID. May want to double check, but that has been my experience. Once you are Soff it's easy to switch CID.
Sent from my HTC VLE_U using xda app-developers app
npiper05 said:
Since you are Soff I don't think it matters what hboot it is. You just have to run the RUU that matches the CID. May want to double check, but that has been my experience. Once you are Soff it's easy to switch CID.
Sent from my HTC VLE_U using xda app-developers app
Click to expand...
Click to collapse
my cid is HTC__001 so shall i run the latest unbranded RUU could you link be to the latest unbranded RUU ? i dont trust my self
Zaman-The-Man said:
my cid is HTC__001 so shall i run the latest unbranded RUU could you link be to the latest unbranded RUU ? i dont trust my self
Click to expand...
Click to collapse
Sending you a PM now

RUU after S-OFF

Is it possible to do a JB RUU after i just superCID and S-OFF? Because i wanna go back to stock.
Yes,but don't use the OTA RUU or you will brick your phone
yooouuri said:
Is it possible to do a JB RUU after i just superCID and S-OFF? Because i wanna go back to stock.
Click to expand...
Click to collapse
You can use any ruu while s-OFF, just simply plug phone to computer and run ruu. No need to relock bootloader.
For the supercid, it is recommended to change it back to original with fastboot command.
Fastboot oem write cid xxxxxxxx.
There has been a few bricks takin Jb ota while still supercid.
Sent from my HTC One S
tominozh said:
You can use any ruu while s-OFF, just simply plug phone to computer and run ruu. No need to relock bootloader.
For the supercid, it is recommended to change it back to original with fastboot command.
Fastboot oem write cid xxxxxxxx.
There has been a few bricks takin Jb ota while still supercid.
Sent from my HTC One S
Click to expand...
Click to collapse
Uwe303 said:
Yes,but don't use the OTA RUU or you will brick your phone
Click to expand...
Click to collapse
Thanks for your fast response, how do i know my original CID?
Im going to flash
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4.exe
So do i need to change my CID?
yooouuri said:
Thanks for your fast response, how do i know my original CID?
Im going to flash
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4.exe
So do i need to change my CID?
Click to expand...
Click to collapse
Just change it to
Fastboot oem writecid HTC__001
Sent from my HTC One S
tominozh said:
Just change it to
Fastboot oem writecid HTC__001
Sent from my HTC One S
Click to expand...
Click to collapse
Thanks
Edit;
If i change my CID to HTC__001 and i run the RUU, i cant change my language to dutch.
@tominozh
Edit;
Changed to HTC__E11, lets run the RUU again and hope!
CIDs list: http://forum.xda-developers.com/showthread.php?t=2139447
tominozh said:
Just change it to
Fastboot oem writecid HTC__001
Sent from my HTC One S
Click to expand...
Click to collapse
Its not mandatory to change your SuperCID back to stock just to install a RUU (with OTA RUU you get problems, but not with normal ones).
yooouuri said:
Thanks
Edit;
If i change my CID to HTC__001 and i run the RUU, i cant change my language to dutch.
@tominozh
Edit;
Changed to HTC__E11, lets run the RUU again and hope!
CIDs list: http://forum.xda-developers.com/showthread.php?t=2139447
Click to expand...
Click to collapse
Where you cant change the language?

[Q]SuperCID on VilleC2

hello to all . i have a simple question... i don't have a stock sense rom accepted for Moonshine.. so in the case i want to do S-OFF i have to use rumrunner... but the only thing to i try S-OFF its to have the possibility to have SuperCID and use any RUU... so here come my questions:
1-. i don't find a thread to have SuperCID on villeC2.. so its impossible? can't use fastboot write cid 11111111 ?
2-. my model is pj40210, not the universal pj40200 this matter? can i run a ruu for pj40200 on my phone? can damage?
thats all. thanks
xiaolvmu said:
Aha, to find the stock ROM, you can go to http://www.androidruu.com. I always download VilleC2 RUU there.
S-Off is doesn't need supercid. Also, VilleC2 has a strange security lock and we can never write CID (even change the mmcblk0p13. Don't try it, too dangerous. I've tried to get supercid but failed).
The model seems doesn't matter.
Click to expand...
Click to collapse
thanks for response . the problem is, for ,my CID (BSTAR301) don't exist a ruu . just have my nandroid backup
xiaolvmu said:
That means your CID doesn't have a RUU for download? You can Change your CID. I'll post a tutorial on One S forum
Click to expand...
Click to collapse
exactly my CID doesn't have a RUU for download! how i can change my CID? please make a tutorial i don't need do it because i'm using your rom hehehehe.... but.... just in case.....
xiaolvmu said:
OK... @JavierG123
I already found an existing tutorial:
http://forum.xda-developers.com/showthread.php?p=26516911
The only difference is, VilleC2 can't use 11111111. You can change it to HTC__044 (Asia Version)
Then, in this download page : http://androidruu.com/?developer=VilleC2
Download this: RUU_VILLEC2_U_ICS_40_S_hTC_Asia_WWE_2.15.707.101_Radio_16.21.20.02U_16.09.20.11_M2_release_289564_signed.exe
Then you can flash the pure RUU
ps: The Hex Editor on Windows is a paid software, so I'll give a cracked version
https://www.dropbox.com/s/ath1t92jrs4lm78/Hex Editor for changing CID.zip?dl=0
Click to expand...
Click to collapse
thanks a lot xiaolvmu! i just find FOR FIRST TIME!!! I SEARCHING THIS FOR A VERY LONG TIME!!! a OTA for my BSTAR301.. but i don't now how to for example... back to stock with a ota... in the case i need a use a full ruu i use that post, thanks for the help. i dont know that... our ville don't support super cid but yes other cid xd... this htc people... god...

Categories

Resources