i have an Sony Xperia Neo V , Officially Updated ICS 4.0.4
so i m starting to move with it....
i have rooted my device and its successfully rooted, then i tried to unlock bootloader, followed sony's official method.
at final command line "fastboot.exe -i 0x0fce oem unlock 0xKEY" i got an error, it says Failed "your device already unlocked"
ok fine, so its unlocked...
i needed a CWM recovery, so i install and flash CWM via X-Parts from Play store and it works successfully...
i rebooted my devices into recovery and took an nandroid backup.
well everything goes well
then i got interest about cynagenmod officail custom Rom, i have downloaded cm-9.1.0-haida.zip and gapps-jb-20121011-signed.zip for my xperia neo v. i choose that because it was only stable ROM from cynagenmod.
then cynagenMod instruction says that i have to flash from cm-9.1.0-haida.zip, so i did copy boot.img from zip and paste it into sdk and i flashed that via SDK.
the great mistake i have done
its flashed CWM Based recovery v6.1.0.2
My boot screen also changed from Sony, Xperia to Free Experia Project with that boot.img flash
after that i didnt took any nandroid backup, i thought i already have one via X-parts CWM
so i did follow instruction, wipe cache, wipe data/factory reset, delvic cache, battery and install cm-9.1.0-haida.zip from sd card, also gapps-jb-20121011-signed.zip
after installation done i rebooted my device and CM9.1.0 just ready to use, well i have setup everything and start using Cynagenmod Based ROM,
i didnt get much fun of it and i wanna go back to my stock ROM ics 4.0.4
i reboot into recovery and restore backup (created with x parts recovery), the restoration was successfull but after reboot Free Xperia Project boot window comes again and after few second my phone stucks in black screen.
that time i noticed my phone have now two CWM recovery, CWM v6.0.1.2 and X-parts Recovery.
then i tried another ROM called "Revolution_ics_hd_revolution[build_7].zip" it was also installed successfully, but my phone stuck again after Free Xperia Project Boot Screen, and X parts Recovery gone again with this installation.
i tried to flash Stock Rom MT11i_4.1.B.0.587.ftf and Stock kernel MT11i_4.1.B.0.587_kernel.ftf by Flashtool.
when i reboot into flashmod then altime it says : -
06/041/2014 14:41:30 - ERROR - Error in processHeader : 1 : Incorrect function.
06/041/2014 14:41:30 - ERROR - Error flashing. Aborted
i dont know what to do, i can only install and use CM9.1.0 haida now, no other ROMs, even i dont wanna go back to my stock boot screen, stock rom 4.0.4...
i guess somehow if i can remove that boot.img comes from cm-9.1.0-haida.zip, flash original sony boot screen then i could have back to my everything stock and original
is there any way? any tips...?
I wanna go back to my custom kernel, custom rom 4.0.4.....
Please help me....
You must insert loader.sin on firmware folder (flashtool)
Sent from my MT11i using XDA Free mobile app
Related
got the phone yesterday, then installed the OTA update , then when i got back home i unlocked the bootloader from htcdev site.Then went to fastboot and flashed the cwm recovery touch,installed the su libs, did a backup ,factory reset and wipe cache, installed cm 10.0 and gapps , after restart it was unable to boot.now i know this is because of s-on.So i restored the backup and then installed goo manager from play store and flashed twrp recovery in order to try cm 10.1 with its aroma installer.during the installation of cm 10.1 i choose the newest tmo radio and after that i installed the htcdumlock and then THIS IS WHERE THE THINGS WENT WRONG i choose one of the other options in twrp i think restore recovery and then the option on the right side on the screen but it didn't able to finish it so i restarted the phone and now it stays on the the red warning text , unless i install boot.img from MaximusM fastboot toolkit or something witch gives me the option to choose recovery from fastboot witch actually somehow boots the ROM. forgot to mention that i had problems with the sd card mounting under twrp after i flashed cm 10.1 so i had to revert back and then between stock recovery witch actually makes the phone to boot in the stock rom and the other two custom recovery`s
so i have downloaded the tmo ruu and before im trying to relock the device i just want to ask am i on the right way with this??
Its OK i figured it out
Hi everyone...
I need help about putting CM 10 to my Xperia J [ST26i]
My Xperia came with 11.0.A.7.5 firmware.
First thing I do is Unlocking Bootloader - which is successfull...
Second is trying to Root it...
So I have downgraded to 11.0.A.3.28_WE firmware then rooted it.
Then I decided to put a CM10 FXP 209...
Everything is continued without problem...
Untill I'm on writing "boot.img" to my ST26i...
I've tried CMD and Flashtool but both says "Device must be rooted, are you root?" or something like that...
But my device is already rooted on 11.0.A.3.28_WE firmware...
Do this have to be rooted on 11.0.A.7.5 firmware?
Also I have tried to do it via manuel.
I was install CWM and enter it wiped device, but CWM can't find zip file to install or update.
I was copied with both names "blablablaFXP209.zip" and "update.zip"...
Then CWM is freezed and my device stucked at black screen.
After that I have installed 11.0.A.3.28_WE firmware again and rooted it...
What should I do now?
Do I have to unlock bootloader again?
1 more thing to ask...
I have a Xperia ArcS too, can I change the IMEI...
Thanks who all helped...
LuciferTR said:
Hi everyone...
I need help about putting CM 10 to my Xperia J [ST26i]
My Xperia came with 11.0.A.7.5 firmware.
First thing I do is Unlocking Bootloader - which is successfull...
Second is trying to Root it...
So I have downgraded to 11.0.A.3.28_WE firmware then rooted it.
Then I decided to put a CM10 FXP 209...
Everything is continued without problem...
Untill I'm on writing "boot.img" to my ST26i...
I've tried CMD and Flashtool but both says "Device must be rooted, are you root?" or something like that...
But my device is already rooted on 11.0.A.3.28_WE firmware...
Do this have to be rooted on 11.0.A.7.5 firmware?
Also I have tried to do it via manuel.
I was install CWM and enter it wiped device, but CWM can't find zip file to install or update.
I was copied with both names "blablablaFXP209.zip" and "update.zip"...
Then CWM is freezed and my device stucked at black screen.
After that I have installed 11.0.A.3.28_WE firmware again and rooted it...
What should I do now?
Do I have to unlock bootloader again?
1 more thing to ask...
I have a Xperia ArcS too, can I change the IMEI...
Thanks who all helped...
Click to expand...
Click to collapse
you have to flash boot.img before the rom
and why did you flashed it if you installed succesfully FXP?
what are you trying to flash?
bornlivedie said:
you have to flash boot.img before the rom
and why did you flashed it if you installed succesfully FXP?
what are you trying to flash?
Click to expand...
Click to collapse
There is misunderstanding.
I do all the prepares successfully, but I can't flash the FXP...
Cause I can't flash the "boot.img"...
There is always says "Device must be rooted! Are you root..."
LuciferTR said:
There is misunderstanding.
I do all the prepares successfully, but I can't flash the FXP...
Cause I can't flash the "boot.img"...
There is always says "Device must be rooted! Are you root..."
Click to expand...
Click to collapse
and you are trying to do this via fastboot?
IE: fastboot flash boot boot.img
Yes, I have used fastboot and Flashtool...
I'm following those steps [From FreeXperia] :
1.Device Unlocking
All info regarding unlocking procedure is on SONY website
2.Copy update on phone
a.copy update
copy update-xxx-xxx-xxx.zip coresponding to your device to sdcard
b.copy GAPPS
due to legal rules gapps are not provided into main rom
google for gapps package and copy on sdcard
3.Flash CM kernel
a. extract boot.img from zip file
b. power off device
c. press volume up (2012 devices) / menu (2011 devices)
d. plug usb and blue led will be lit
e. on computer type in same folder where you have boot.img
fastboot flash boot boot.img
fastboot reboot
!!! you have to have fastboot.exe in same folder !!!
4.Boot into recovery
while FXP logo is displayed (and lights are lit) press several times volume up to enter CWM (recovery)
5.Flash ROM
to update main rom select
a.Install zip from sdcard
b.choose zip from sdcard
c.select your update (copied at step 2)
to flash gapps redo steps a-c and select gapps package
!!! use gapps version designed for your android version !!!
6.Wipe device
from cm9 device wipe is necessary only at first flash or when you switch cm version
!!! if after boot you experience ForceClose then is recomended to reboot to recovery and wipe device
7.Partition format
is not recomended to format your partitions unless you are advised to do otherwise
8.reboot and enjoy...
But every time, stucked on 3rd step....
Always says "Device must be rooted. Are you root?"...
LuciferTR said:
Yes, I have used fastboot and Flashtool...
I'm following those steps [From FreeXperia] :
1.Device Unlocking
All info regarding unlocking procedure is on SONY website
2.Copy update on phone
a.copy update
copy update-xxx-xxx-xxx.zip coresponding to your device to sdcard
b.copy GAPPS
due to legal rules gapps are not provided into main rom
google for gapps package and copy on sdcard
3.Flash CM kernel
a. extract boot.img from zip file
b. power off device
c. press volume up (2012 devices) / menu (2011 devices)
d. plug usb and blue led will be lit
e. on computer type in same folder where you have boot.img
fastboot flash boot boot.img
fastboot reboot
!!! you have to have fastboot.exe in same folder !!!
4.Boot into recovery
while FXP logo is displayed (and lights are lit) press several times volume up to enter CWM (recovery)
5.Flash ROM
to update main rom select
a.Install zip from sdcard
b.choose zip from sdcard
c.select your update (copied at step 2)
to flash gapps redo steps a-c and select gapps package
!!! use gapps version designed for your android version !!!
6.Wipe device
from cm9 device wipe is necessary only at first flash or when you switch cm version
!!! if after boot you experience ForceClose then is recomended to reboot to recovery and wipe device
7.Partition format
is not recomended to format your partitions unless you are advised to do otherwise
8.reboot and enjoy...
But every time, stucked on 3rd step....
Always says "Device must be rooted. Are you root?"...
Click to expand...
Click to collapse
R u sure that ur device is rooted
Sent from my ST21i using xda app-developers app
Yes, Yes and Yes...
I have successfuly unlocked the bootloader and downgraded to older firmware...
Sucessfully Rooted and SupeUser is installed...
But stuck at the writing "boot.img"...
Tried Windows XP SP3, Windows 7 32Bit and 64 Bit...
Tried with Command Line and FastBoot...
Any other idea?
Bro when u downgraded u have to once again unlock the boot loader !! Check if it works !!
Sent from my ST26i using xda app-developers app
I have tried that one too...
Suspected that and tried "Unlock Bootloader again...
Nope it's not unlocking second time just hangs on in command line.
Also, my problem is happened before that one...
SOLVED
- I have fully wiped the device.
- Updated, then downgraded and rooted.
- Unlocked BootLoader with Key AGAIN...
After that proccess successfuly booted the CM 10...
I hope that info helps someone else too...
Thankls all who interested...
Hi guys, I need a very BIG HELP...
first of all, I'm a bit new with the flashing,,etc
I had the latest update on my Xperia Ray 4.0.4 ICS,, then I decided to flash it,, my bootloader was allowed unlock but i did not unlock it
i followed the walk through where you root without unlocking the bootloader
I flashed my phone to 4.1.A.0.562 kernel,
then flashed again to 4.1.B.0587 kernel,
went into CWM and installed Xperia Ultimate HD 3.0.2 from sd card,
then i saw the MOD 4.4,
installed it from sd card by using CWM
all worked well
then i messed up everything
i wanted to remove the MOD
I went into CWM recovery mode
I had "wipe data/factory reset",
then had "wipe cash partition"
then install the Xperia Ultimate HD from sd card...
after installing, the phone remained on the Sony logo screen without loading...
I tried to flashed it but on flashtool it said "need to root"
I used fastboot mode,, and unlock my bootloader successfully..
I flashed it again to 4.1.A.0.562 kernel and then to 4.1.B.0587 kernel,, but still nothing happened :'(
my phone is still stuck on the "Sony" logo screen and I cannot enter CWM recovery
And i think that my phone was not on debugging mode or unknown sources checked
Dont know what to do....... :'(
PLEASE HELP...................
avinash.itish said:
Hi guys, I need a very BIG HELP...
first of all, I'm a bit new with the flashing,,etc
I had the latest update on my Xperia Ray 4.0.4 ICS,, then I decided to flash it,, my bootloader was allowed unlock but i did not unlock it
i followed the walk through where you root without unlocking the bootloader
I flashed my phone to 4.1.A.0.562 kernel,
then flashed again to 4.1.B.0587 kernel,
went into CWM and installed Xperia Ultimate HD 3.0.2 from sd card,
then i saw the MOD 4.4,
installed it from sd card by using CWM
all worked well
then i messed up everything
i wanted to remove the MOD
I went into CWM recovery mode
I had "wipe data/factory reset",
then had "wipe cash partition"
then install the Xperia Ultimate HD from sd card...
after installing, the phone remained on the Sony logo screen without loading...
I tried to flashed it but on flashtool it said "need to root"
I used fastboot mode,, and unlock my bootloader successfully..
I flashed it again to 4.1.A.0.562 kernel and then to 4.1.B.0587 kernel,, but still nothing happened :'(
my phone is still stuck on the "Sony" logo screen and I cannot enter CWM recovery
And i think that my phone was not on debugging mode or unknown sources checked
Dont know what to do....... :'(
PLEASE HELP...................
Click to expand...
Click to collapse
did you follow the instructions of the thread http://forum.xda-developers.com/showthread.php?t=1924291 correctly? you also said in the end you able to unlock you bootloader, so flash at fastboot any kernel that is compatible with the rom you want or the one the provide.
OR
IF you want to repeat all the procedures from the start flash back your stock ICS ROM then root it the way you know how to root it..install CWM then GO follow the instruction carefully of the ROM you wanted to try just be careful not to brick your device by flashing rom not intended for your device
GOOD LUCK!
Hi,
I also ended up with a bricked Xperia Ray. If you did not unlock your bootloader, you should be able to restore your phone with Sony Update Service. That worked for me, until I unlocked my bootloader. Once unlocked, the software refuses to do anything with your phone and you're forced to take more drastic measures.
The method demonstrated in the video worked perfect for me. However, you'll have Android 2.3 running. If your bootloader is still unlocked, you should be able to update with Sony Update Service. If not, you can try do download a more recent stockrom and flash that with flashtool. That worked for me. I still had to flash another kernel though, to get Doomlord working again and root my phone. I used RecoveryX to flash CWM recovery on my phone.
I also recommend Iced Bean 3, it's work really well on my phone. Don't make the same mistake as I did and do format /system, /cache and /data, as instructed. And follow these steps to update to 3.5
I decided to root my mom's Xperia E and put CM10 in it. So I began. I first rooted with cydia impactor and put supersu manually and installed binaries. It was successfully rooted. Now when I unlocked my bootloader I faced a bootloop, so I flashed stock ftf and then rooted again. So now I have a rooted and bootloader unlocked xperia e. Then I decided to install cwm. I tried to do it using cmd prompt but everytime it would show <waiting for device> and then nothing happens (I booted in fastboot mode). After that I decided to put zeus kernel. In the download section, confusion started as there were 2 versions, for cwm and TWRP respctively, I tried the cwm one and flashed it using flashtool but then my phone's UI was like gone. I was only able to open settings app. So I decided to flash stock FTF and keep it in stable state for now. So what do I need to do to install cm10?
Thanks in advance
When it says <waiting for device> just follow these steps:
1.Turn off the phone
2.power off button + volume UP
3.wait to finish flash
If it dosn't work reinstall drivers.
AvinabaDalal said:
I decided to root my mom's Xperia E and put CM10 in it. So I began. I first rooted with cydia impactor and put supersu manually and installed binaries. It was successfully rooted. Now when I unlocked my bootloader I faced a bootloop, so I flashed stock ftf and then rooted again. So now I have a rooted and bootloader unlocked xperia e. Then I decided to install cwm. I tried to do it using cmd prompt but everytime it would show <waiting for device> and then nothing happens (I booted in fastboot mode). After that I decided to put zeus kernel. In the download section, confusion started as there were 2 versions, for cwm and TWRP respctively, I tried the cwm one and flashed it using flashtool but then my phone's UI was like gone. I was only able to open settings app. So I decided to flash stock FTF and keep it in stable state for now. So what do I need to do to install cm10?
Thanks in advance
Click to expand...
Click to collapse
Nothing much if you flashed Stock FTF recently then just flash Zues Kernel the CWM one, make sure you have the proper drivers to flash using flashtool.
Then boot up and go into recovery and flash the CM10.zip. Then you will need to flash the CM10 kernel. Its usually inside the ZIP named "boot.img"
Hello,
1st.: while starting this new thread, I looked through the automaticly generated similar threads and found non that was suiting my problem.
Last night I unlocked the bootloader of my wifes Xperia L (C2105) and got stuck into an boot loop. After this I had the need to flash an original rom (4.1.2). This results in an total wipe of the phone :crying:
Now the phone has an unlocked bootloader and an old Android Version. I want to install the pacman rom 4.4.4. I know i have to use cwm or twrp to do this, but do I need to root the device?
I'm a little bit confused. I thought installing the *.img-File from TWRP, with the folloing command, will get me the recovery option an with this option
Code:
c:\fastboot\Fastboot.exe flash boot C:\fastboot\openrecovery-twrp-2.8.4.0-taoshan.img
Can anyone help me out?
My wife is not upset, but with the boot loop from last night in my mind, I'm quit unsure what to do next.
many thanks in advanced
Felix
you need to root the device and use flashtool by androxyde(Easier and user friendly), first download the rom and put it in internal/external memory and then install thunderzap 4.12 by select bootkk.img and install it in fastboot mode in flashtool, now enter the recovery go into wipe and format options and choose clean to install a new ROM and then flash the pac rom and reboot
Root isn't necessary.
Download PAC ROM, Take boot.img inside the zip.
Flash boot.img via fastboot.
Boot into recovery, wipe data / factory reset.
Flash ROM and GApps.
That's it
NOP, you dont need to root to install a custom rom
felix leiter said:
Hello,
1st.: while starting this new thread, I looked through the automaticly generated similar threads and found non that was suiting my problem.
Last night I unlocked the bootloader of my wifes Xperia L (C2105) and got stuck into an boot loop. After this I had the need to flash an original rom (4.1.2). This results in an total wipe of the phone :crying:
Now the phone has an unlocked bootloader and an old Android Version. I want to install the pacman rom 4.4.4. I know i have to use cwm or twrp to do this, but do I need to root the device?
I'm a little bit confused. I thought installing the *.img-File from TWRP, with the folloing command, will get me the recovery option an with this option
Code:
c:\fastboot\Fastboot.exe flash boot C:\fastboot\openrecovery-twrp-2.8.4.0-taoshan.img
Can anyone help me out?
My wife is not upset, but with the boot loop from last night in my mind, I'm quit unsure what to do next.
many thanks in advanced
Felix
Click to expand...
Click to collapse
you can download the rom, extract it and keep, boot.img file, in fastboot folder, and also keep the downloaded rom zip file in sd card for later use.
than you can use use fastboot commands to flash those boot.img which will install the recovery into your phone, than .
use reboot command in fastboot, it will reboot your phone, take out your cable, using volume up key go to recovery,
there clear all the cache and delvik cache file, then, install your custom rom by selecting from your sd card, it will take a bit of time for first time, so don't worry,
than you are done,