[Q] Darkman/Harris_xx N8010 Stock Rom Issue - Galaxy Note 10.1 Q&A, Help & Troubleshooting

Firstly I really appreciate the work by Darkman and Harris_xx however yesterday I tried to install the ROM from [ROM][STOCK][4.1.2][CMH2] N8010 Stock Rooted Busybox Deodexed (CWM) [05/09/2013] which is Darkman's ROM that was updated by Harris_xx, on my N8010. After it successfully flashes I get an error on boot up stating I do not seem to be rooted / or that supersu is not installed (unfortunately did no capture the actual error) and then it sits at the galaxy note boot page indefinitely.
I'm pretty sure its an issue with the ROM as I am able to flash an earlier version or different ROM without any issues.
Has anyone tested this ROM or have any suggestions on how to resolve this issue?

Last few days i tried the brasilian CML1.
But in my opinion the CMK2 is much smoother and i flashed my version after fullwipe back.
I had no such problems. Even in the german forum noone reported about this.
I can't reproduce where the problem is.
You could try to flash the latest SuperSU.zip trough recovery.
http://download.chainfire.eu/372/SuperSU/UPDATE-SuperSU-v1.86.zip

I downloaded the ROM again, and although it seemed to be the same size that seemed to have worked. Really appreciate your feedback and of course the ROM update!

Related

[Q] Custom ROMs won't boot

Hey guys, I've seen this issue before yet I've tried everything in a few threads now but have no idea what is happening,I have tried using search function yet no solution has fixed my problem.
Problem:
When installing custom ROMs the installation goes fine. I put the ROM on the sdcard, follow instructions for flashing e.g wipe data/cache etc and then flash GAPPS. However I get stuck on the boot logo of every ROM. I've tried both TWRP and CWM recoveries, both with no luck. Also tried not flashing GAPPS and just trying to flash the ROM to no avail.
Current state of phone:
The phone is currently running stock firmware via downloading factory image and flashing in boot-loader : stock boot, recovery, system image etc
The phone works fine when rooted on stock firmware. E.g no custom rom yet rooted.
Could really do with some help guys, any ideas?
muqy said:
Hey guys, I've seen this issue before yet I've tried everything in a few threads now but have no idea what is happening,I have tried using search function yet no solution has fixed my problem.
Problem:
When installing custom ROMs the installation goes fine. I put the ROM on the sdcard, follow instructions for flashing e.g wipe data/cache etc and then flash GAPPS. However I get stuck on the boot logo of every ROM. I've tried both TWRP and CWM recoveries, both with no luck. Also tried not flashing GAPPS and just trying to flash the ROM to no avail.
Current state of phone:
The phone is currently running stock firmware via downloading factory image and flashing in boot-loader : stock boot, recovery, system image etc
The phone works fine when rooted on stock firmware. E.g no custom rom yet rooted.
Could really do with some help guys, any ideas?
Click to expand...
Click to collapse
same problem simple solution another user informed me of.
simply donwgrade to 4.3 JB stock rom through fastboot. Then you are able to flash a custm rom from the 4.3 stock rom.
Its crazy i have to do this but it worked for me, now im running the xperience rom which is a rom based on 4.4.2 kk.
the 4.3 android stock firmwares are linked somewhere in the FAQ's as well as the guide to ffastboot lash it.
peace.
chairsz said:
same problem simple solution another user informed me of.
simply donwgrade to 4.3 JB stock rom through fastboot. Then you are able to flash a custm rom from the 4.3 stock rom.
Its crazy i have to do this but it worked for me, now im running the xperience rom which is a rom based on 4.4.2 kk.
the 4.3 android stock firmwares are linked somewhere in the FAQ's as well as the guide to ffastboot lash it.
peace.
Click to expand...
Click to collapse
Hey man, worked a charm thanks!
For users who may have the same problem:
After flashing 4.3 onto the device it did NOT boot.
- However I then went into the bootloader flashed custom recovery, I used cwm.
- Then I went into recovery, used adb to push the rom and gapps onto sdcard
- Full wipe and then installed rom. Then installed gapps
Working fine.
Cheers chairsz :good::good:

[Q] Help! N8010 stuck at samsung logo.

hi all, I'm trying to upgrade to KK with a stock/official fw; linky via odin 3.07. I am able to flash successfully, the tablet restarts and then just sits at the Samsung "blue oval thing"
I've tried TWRP touch 2.8.0.1 to install Gnabo 6.5, following instructions of Here, using "Installation for N801x". All has gone as expected until I tried to install the bootloader section, TWRP crashes to bootloop each time.
I've tried re-downloading the bootloader as well as clean flash of KK and using CWM touch 6.0.3.6 in place of TWRP; same result.
I have a backup of 4.0.something, but i want 4.4.2. Any suggestions are welcomed, TIA.
check bootlader version
daniel302010 said:
hi all, I'm trying to upgrade to KK with a stock/official fw; linky via odin 3.07. I am able to flash successfully, the tablet restarts and then just sits at the Samsung "blue oval thing"
I've tried TWRP touch 2.8.0.1 to install Gnabo 6.5, following instructions of Here, using "Installation for N801x". All has gone as expected until I tried to install the bootloader section, TWRP crashes to bootloop each time.
I've tried re-downloading the bootloader as well as clean flash of KK and using CWM touch 6.0.3.6 in place of TWRP; same result.
I have a backup of 4.0.something, but i want 4.4.2. Any suggestions are welcomed, TIA.
Click to expand...
Click to collapse
Did you flash the Leaked n8000 firmware that Changes the Boot-Loader to the knox boot-loader. If so i think you have to flash a 4.4.2 zip with Mobile odin as it does not do a Boot loader check. There are several threads about 8010 Devices STUCK Into using the n8000 firmware only. Then you have to apply the no cell and wifi fix patches. I do not have a 8010 mine is 8013 so i do not have this issue and have not read totally up on it. It just seems this could be your Trouble.
Good Luck
Thanks Erica_Renee,
I've read about this issue in a few threads, I didn't feel it affected me as my bootloader screen
View attachment 2968202
doesn't show anything about Knox.
but, as I'm short on options; why not. So you're saying go back to 4.0.whatever, install mobile odin and flash KK N8010 rather than through odin on desktop?
problem with up rom
Hi guys,
Please help me
last time i used N8013 with revolution hd 10.1, till now i tried up new rom on xda but it's not working, its was hand up at samsung logo, and then i tried re setup CMR Download HighOnAndroid v1 ClockworkMod Recovery 6.0.1.1 and then re up rom revolution again, but it till stop at samsung logo, then i find one rom stock on samfirmware KIES_HOME_N8013UEALI3_N8013XARALI3_1081475_REV00_u ser_low_ship.tar but its has a problem ( factory mode has unabale working) and auto turn off wifi, so i dont know how to turn back my best tab before.
Thanks

Galaxy S5 900J stock rom

Hi, my friends dad purchased a galaxy s5 (scl23 - sm900j, running 4.4.2 )from some website and its performance has been atrocious. Me and my friend have attempted to install a custom rom but have ran into issues. At first we tried to flash twrp through odin but that failed so then we tried to install twrp through twrp manager (we gained root through towel root). The main problem happened when he rebooted into the bootloader/recovery screen where he got the "could not do normal boot" message. Google says that to resolve this you flash the stock rom, so we tried googling for that but not even sammobile has the 900j stock rom. Does anyone any way to fix the problem/ what/where the 900j rom is?
edit: i think i might have found it, using SCL23 brings up results even though 900J doesnt.
follow up question: say we are able to boot back to stock rom, are there any tailored guides for the 900J on how to flash?

N915G - Soft bricked installed wrong stock ROM

Hi,
I was trying to flash the stock ROM on my N915G ROM earlier today however it was the wrong one. It turns out it was for the Singapore version of the N915G (5.1.1) not the Taiwan version which is the one i wanted (5.0.1 is the latest version for the Taiwan version).
Odin shown the failed message when i tried to flash it (which nearly gave me a heart attack).
I installed the CWM recovery and tried to restore my backup that i taken however i just get the Samsung logo boot loop.
I then wiped cache and dalvic cache and reset the ROM. I managed to get as far as the "android is optimizing apps" box but i just get a boot loop when its finished optimizing the 23 applications.
I am thinking i should probably just try and flash the stock ROM with odin but i really dont know what to do!
Any help would be much appreciated !
Alex
EDIT: Flashed the stock ROM and seems to be working now. Can close thread.

Problem with root

Hello guys,
i wanted to use a rom without all the google stuff, so i decided to go for the OCT-OS Rom based on LOS14.1. Working good so far but i cant get working root. i flashed 2.79 SR3 right after first boot of the rom and tried to flash it directly after flashing the rom but nothing works.
Can you help the fault?
Greetings
Problem solved. Don't know what I did but it works now.

Categories

Resources