Database Info

[KERNEL][P920&SU760][2.6.35.14]BlueKernel v1.2.0 FAST | MORE BATTERY | MANY FEATURES

[KERNEL][P920&SU760][2.6.35.14]BlueKernel v1.2.0 FAST | MORE BATTERY | MANY FEATURES
Hi, I'm developing custom kernel for Optimus 3D This kernel is that kernel. BlueKernel focus on better performance and more battery. This kernel keeps up-to-date. So, check the version of this kernel!
Changelog in v1.2.0 :
* Changed compile option (-O2 -> -O3)
* Changed available frequencies of CORE
* Applied correct SmartReflex value of MPU
* Improved boot speed tweak
* sched_mc_power_savings : 2
* Set scaling_max_frequency : 1008MHz at boot
( You can change max frequency on application such as SetCPU)
* Reduced voltage at 100MHz of MPU
* Dimmed screen brightness during boot
* Improved CPU governor Hotplug
Changelog in v1.1.9 :
* Solved sound problem (Rebooted phone problem when calling)
* Use updated compiler (Linaro GCC 12.06)
* Compile option changed (-O3 -> -O2)
* Ported Ezekiel 's FSync Control & Sound Control :
Sound Control - Set volume boost and toggle high performance audio mode.
/sys/class/misc/soundcontrol/volume_boost
volume boost value from 0 to 3 (default 0 = no volume boost)
/sys/class/misc/soundcontrol/highperf_enabled
high performance audio mode, enable = 1, disable = 0 (default disabled, might increased battery drain during music playback)
FSync Control - Enable/disable single file/filesystem sync.
/sys/class/misc/fsynccontrol/fsync_enabled
enable = 1, disable = 0 (default enabled)
Disabling single file/filesystem sync increases the risk of a data loss on a crash/freeze and potentially can lead to other side-effects.
Changelog in v1.1.8 :
* Add 'PegasusQ' CPU governor (CPU governor of Galaxy S3)
* Revert RAM overclock
* Update sound driver
* sleep_while_idle : 1
* Add 1.3GHz CPU clock step
* Stabilize mpu voltages
Changelog in v1.1.7 :
* Apply RAM overclock (Max. 450MHz)
* Stabilze applying changed voltage
* Checking boot speed tweak
* sched_mc_power_savings : 1
Changelog in v1.1.6 :
* Version for P920 is added again
* More optimized compile options are added. (For ARM Cortex-A9, ARMV7-a)
* Compiled VFP with Neon.
* LOAD_FREQ are modified for OMAP kernel and more speed.
* Stock GPU clock. (GPU overclock occur slow performance)
* Added Fugeswap in Lowmemorykiller.
* Added PREEMPT_COUNT_CPU.
Changelog in v1.1.2 ~ v1.1.5 :
* Updated Linux version to 2.6.35.14
* Enable KSM (More freeRAM)
* sched_mc_power_savings : 2 (More Battery)
* Tweaked internet speed(WiFi, 3G)
* Update Simple I/O Schduler (v0.2)
* Improve lowmemorykiller parameter
* Increase Wifi scan interval (More Battery)
* Update Compiler (Linaro GCC 2012.05 - Optimized for OMAP4430)
* New Optimized compile option (-O3)
* New kernel boot logo
* Add new CPU governor : wheatly
Features :
* Based on SU760 V20e source
* New CPU governors and I/O schedulers are added. (smartassV2, lazy, wheatley / sio, vr, bfq)
* Kernel version is updated to 2.6.35.14 from 2.6.35.7 (But, displayed 2.6.35.7+. Because for using stock WiFi driver module.)
* Compiled with latest compiler(Linaro GCC 12.05) and optimized compile options.
* Set kernel for improving performance. (Using ext4 file system, 256Hz Tweak, readahead value increase to 1024... etc..)
* User scripts in /system/etc/init.d are run during boot. (Name of scripts file must start with alphbat capital 'S' and 2 digits.)
* Added many kernel tweaks like ARM optimization, common Linux tweak. (Backported Sched AutoGroup, disabled fsync... etc..)
* Added TUN/CIFS and improved RAM managemant ability.
* Removed useless kernel options and improve kernel functions. (Improve USB transfer speed, Fix upper X bound touch detection... etc..)
Git of BlueKernel is https://github.com/iBluemind/BlueKernel (This source is version 1.0.2)
Please report error or bug with log.
This kernel support ALL Gingerbread firmware! (Not supported CM7 yet)
[Download]
SU760 : http://www.mediafire.com/?bhsd7e1gdi8re69
P920 : http://www.mediafire.com/?94tpv9i1p9b6ms1
This .zip file is installed through ClockworkMod Recovery.
[Overclock Modules Installer]
Download : http://db.tt/TkRg4Zyn
Thanks to tekahuna, Ezekiel!
ClockworkMod Recovery for SU760 : http://forum.xda-developers.com/showthread.php?t=1565412

Wrong site when Not for p920
Dont know that thats the Same phone sry

kampfbestie said:
Wrong site when Not for p920
Click to expand...
Click to collapse
It is the right forum SU760 is a p920 but named differently in Korea...

kampfbestie said:
Wrong site when Not for p920
Click to expand...
Click to collapse
SU760 is Optimus 3D for Korean. This forum is 'Optimus 3D Forum', not 'P920 Forum'.
Sent from my LG-SU760 using XDA

Why it cannot be flashed on p920? Korean version has gsm frequencies as european one?

Anyone tried it?
-----If it ain't working, try something else. ------

IFLPI said:
Why it cannot be flashed on p920? Chinese version has gsm frequencies as european one?
Click to expand...
Click to collapse
I have Korean one. Then, I don't know about Chinese one..
Sent from my LG-SU760 using XDA

Sorry, I don't know why I wrote Chinese, I meant Korean. I'm disrupted today. Possibility of a brick after flashing this on p920?

IFLPI said:
Sorry, I don't know why I wrote Chinese, I meant Korean. I'm disrupted today. Possibility of a brick after flashing this on p920?
Click to expand...
Click to collapse
Hmm... Flashing P920 ROM on SU760 is possible, but flashing P920 kernel on SU760 is impossible. So, maybe flashing SU760 kernel on P920 is impossible too.
Sent from my LG-SU760 using XDA

Tested on EU Version of optimus 3D
Only that wont work is wifi amd bluethoot for the rest kernel works good

Is a kernel +.....roms works well based on 21A

jechus said:
Is a kernel +.....roms works well based on 21A
Click to expand...
Click to collapse
Jechus also work on v20a??
Mfg ;-)

Anyone could make a kernel like gingerbestia but with better multitasking? Free ram up to 250mb? And 1,4 ghz cpu oc.

Updated to v1.0.5
BlueKernel was updated to version 1.0.5.
Some kernel tweaks were added, and some CPU governor and IO scheduler were added too.

iBluemind said:
BlueKernel was updated to version 1.0.5.
Some kernel tweaks were added, and some CPU governor and IO scheduler were added too.
Click to expand...
Click to collapse
Your kernel link is broken only downloads 558KB it is corrupted please look into it

I'm on v20c right now... so this kernel should work on my phone... correct?

Thanks Meemo23
Meemo23 said:
Your kernel link is broken only downloads 558KB it is corrupted please look into it
Click to expand...
Click to collapse
yeah, I uploaded a file again. Thanks.

thrill_seeker said:
I'm on v20c right now... so this kernel should work on my phone... correct?
Click to expand...
Click to collapse
This kernel is for SU760, Korean Optimus 3D. Then, maybe this kernel doesn't work on Thrill 4G(P925)

BlueKernel was updated to version 1.0.6
BlueKernel was updated to version 1.0.6. I added some new kernel tweaks.
* Add SMT Scheduling Support NEW
* Add ARM CPU Topology NEW
* Add Multi-core CPU scheduler support NEW
* Add CFQ Group scheduling NEW
* Add Coverting to EXT4 NEW

thx for making a perfect rom, the first time i seem in this place a rom for su760, but if this only one where have?

[Kernel] [Uber 5.2] Butter kernel {GPe 5.1} {01/09/2015}

Butter Kernel​
Presenting Butter kernel, a custom kernel built with many optimizations and tweaks. This kernel will work on Stock lollipop GPe devices. The main aim is to provide a stable kernel with optimizations and some features.
Custom Features:
- Updated to latest GPe Sources
- Bumped to 3.4.108
- Compiled With Custom Uber 5.2 Toolchain
- Compiled With -O3 & Graphite Flags
- Compiled With Strict-Aliasing & Cortex A7 Tweaks
- Various Other Build Optimizations
- Replaced Qcom's hotplug binary with mpdecision
- GPU underclock/overclock(Min:100 MHz & Max:533 MHz)
- Add dev/frandom
- Added Support for Kernel Neon Mode
- Enabled Pipe Flag
- IntelliThermal V2 by Faux
- Simple GPU Algorithm
- Add BioShock/DanceDance Govs
- Added SmartMax/LionHeart Govs
- LCD Kcal Control by Savoca
- Faux's Sound Control
- CpuFreq and CpuBoost Optimizations
- Disabled Gentle Fair Sleepers
- Enabled Many TCP Congestions
- Added SIO,VR & ZEN IO Scheduler
- Sched & Mutex Tweaks
- Pushed Read Ahead value to 512
- Enabled FSync by default
- SELinux set to PERMISSIVE
- Power Efficient WorkQueues
- Reclaimed RAM from loggers
- Many more things (Check Github)
Disclaimer:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.​
DOWNLOADS:
AndroidFileHost
How to Flash:
1. Download the kernel and place it into your phone storage
2. Reboot into recovery
3. Install the kernel
4. Wipe Dalvik/ART Cache and Cache partitions
5. Reboot and enjoy![/B][/U]
I would like to thank @Flashhhh for this kernel. He has and promises to continue helping me with kernels. This wouldn't have been possible without him at all. Besides, I've also kanged commits from him (with his permission)
PLEASE DON'T MIRROR THE LINK
XDA:DevDB Information
Butter kernel for GPe 5.1, Kernel for the Moto G
Contributors
Aayushya, Flashhhh
Source Code: https://github.com/Aayushya/kernel-msm
Kernel Special Features:
Version Information
Status: Alpha
Created 2015-09-01
Last Updated 2015-09-01

Reserved.
P.S: Looking for someone to make me a good banner to go with this Kernel. If interested, please PM me

Nice work

Flashed it on non-GPE Stock Brazil 5.1. Successfully booted with /f2fs partition.

iDynamics said:
Flashed it on non-GPE Stock Brazil 5.1. Successfully booted with /f2fs partition.
Click to expand...
Click to collapse
Was it a single sim or dual one?

yeshwanthvshenoy said:
Was it a single sim or dual one?
Click to expand...
Click to collapse
Single sim.

iDynamics said:
Flashed it on non-GPE Stock Brazil 5.1. Successfully booted with /f2fs partition.
Click to expand...
Click to collapse
Idem here!.

Well congrats on this new beauty. After long time i see faux stuff for official ROMs. lolz but you forgot to thanx faux for his hotplug

MP Decision options are missing in kernel tweaker. All cores stay online. Thanks for the wonderful work.

O that note...the battery is killing itself.
Waiting for a fix.

iDynamics said:
MP Decision options are missing in kernel tweaker. All cores stay online. Thanks for the wonderful work.
Click to expand...
Click to collapse
in synapse it appears. But some options do not appear as intellithermal

@Aayushya any updates to this

[KERNEL][7.x][CM/AOSP] Optimus Kernel R21 [OSPREY][1/4/17]

OPTIMUS KERNEL​
Hi guys, this is Optimus kernel for Osprey. This is a simple kernel upto date with CM & msm-3.10 branch of CAF.
Only necessary features will be added. This is for Nougat only. Works on CM/AOSP Roms. Enjoy!
Code:
Disclaimer:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
FEATURES:
- Updated to latest CM-14.1 Sources
- Built with custom tailored Linaro-5.4.1 toolchain (cortex-a53 neon-vfpv4 hard-float targeted, build with latest Crosstool-NG)
- Synced with latest CAF and motorola changes
- Device specific Cortex-A53 tweaks & Linaro optimizations
- Overclock available upto 1.6 GHz (Boots with stock frequencies)
- Added Lazyplug driver
- Added LiveDisplay Driver
- random: squashed entropy tweaks & optimizations
- Added Optimus governor (default gov)
- Added sound control
- Added zen,tripndroid & sioplus I/O schedulers
- Added Fsync ON/OFF Control
- Added USB Fast Charge option
- Added toggles for disabling wlan wakelocks
- Optimized ARM RWSEM Algorithm
- Optimized Square Root Algorithm
- Optimized AES and SHA1 routines with neon support
- KGSL & Devfreq patches
- Disabled CRC check: 30% Performance boost
- Merged upstream ARM,crypto changes
- VFP HardFloat
- Updates to zram,zsmalloc,irq etc
- Sched & Cpufreq Tweaks
- Removed some debug and logging options
- Enabled Advanced TCP Congestions
- CM Profiles compatibility
- Many more (check github)
How to Flash:
1. Download the kernel and place it into your phone storage
2. Reboot into recovery
3. Install the kernel
4. (optional) Wipe Dalvik/ART Cache and Cache partitions
5. Reboot and enjoy!
You need ROM's default kernel before flashing this as this kernel uses Anykernel2 by @osm0sis (huge thanks to him). Make sure you have it otherwise clean flash the kernel with the rom to avoid any issues.(At least dirty flash rom+kernel)
DOWNLOAD:
AFH
Special thanks to @Alberto97 @squid2 @franciscofranco @flar2 @myfluxi @eng.stk @hurtsky @Imoseyon @neobuddy89 @frap129
XDA:DevDB Information
Optimus Kernel, Kernel for the Moto G 2015
Contributors
Flashhhh
Source Code: https://github.com/desaishivam26/Optimus_Osprey
Kernel Special Features:
Version Information
Status: Beta
Created 2016-01-25
Last Updated 2017-02-26

More features will be added in future. Don't hesitate to make a feature request. Thanks!
Modded kernel adiutor apk: https://basketbuild.com/filedl/devs?dev=Flashhhh&dl=Flashhhh/KernelAdiutor.apk
Thanks to @martinusbe and GZR team for allowing me to use and distribute this apk

Will it be compatible with stock..?
Anyway another development work is really appreciated..

FPThatea said:
Will it be compatible with stock..?
Anyway another development work is really appreciated..
Click to expand...
Click to collapse
Needs testing. I have only tested kernel on CM13

Flashhhh said:
Needs testing. I have only tested kernel on CM13
Click to expand...
Click to collapse
Oh.. Hope stock compatible version will come in future... ?

Flashhhh said:
Needs testing. I have only tested kernel on CM13
Click to expand...
Click to collapse
I'll test and report in 2-3 hours....
Sent from my Toilet using Moto G3....

Always happy to see development.

So Great Kernel From G1 and G2 Just landed for G3. Thank you so much.

What a surprise to see you here Flashhh.. Thanks a lot.

WiFi getting disconnected, everything else working on XT1550 CM13....
Sent from my Toilet using Moto G3....

Tested working fine on stock rom. WiFi is also functional. Glad to see my missed stuff from G1 is bought to G3 Thanks again.
One request: if u could add SMARTMAX that you used in G1. It was perfect and best balance of backup and performance.
Besides this hotplug (Fast lane hotplug if possible).
Without hotplug also its going good. Have set min freq to 400MHz and now scaling looks under control without ramping to highest 1.3GHz Wow..! Even after making interactive to be more conservative, the performance is soo buttery smooth. That's lovely.

Hey Flashhhh! Nice to see you here Still using your optimus kernel on my G1

==vj== said:
Tested working fine on stock rom. WiFi is also functional. Glad to see my missed stuff from G1 is bought to G3 Thanks again.
One request: if u could add SMARTMAX that you used in G1. It was perfect and best balance of backup and performance.
Besides this hotplug (Fast lane hotplug if possible).
Without hotplug also its going good. Have set min freq to 400MHz and now scaling looks under control without ramping to highest 1.3GHz Wow..! Even after making interactive to be more conservative, the performance is soo buttery smooth. That's lovely.
Click to expand...
Click to collapse
Yeah I'll add necessary governors only. I won't be adding any hotplug. We are going to stick with msm_performance. I've already merged tweaks to msm_performance for better performance and stability

CPU and GPU OC
Used your kernel on the g2 now the G3. Nice to see more kernel development. Will flash and report back
Is there any way of implementing CPU/GPU OC?

Flashhhh said:
Yeah I'll add necessary governors only. I won't be adding any hotplug. We are going to stick with msm_performance. I've already merged tweaks to msm_performance for better performance and stability
Click to expand...
Click to collapse
That's great honestly I haven't noticed any extra saving on battery backup by offlining of cores on this phone. The stock kernel running without offlining used to still do the best in backup.
So yes I strongly agree.

Updated the Kernel to R2!
Now this kernel uses Anykernel2 by osm0sis to improve compatibilty with all Roms out there. Enjoy!
Changelog:
- Merged CM changes
- Added lionfish governor by squid2
- Added system wide power efficient workqueues
- sched/fair: Implement fast idling of CPUs when the system is partially loaded
- block: bfq: set IOPS mode by default with slice_idle set to 0
- lib/memcopy: use glibc version
- Optimized Square root algorithm
- Some other changes(Check github)
Download: BASKETBUILD

Flashhhh said:
Updated the Kernel to R2!
Now this kernel uses Anykernel2 by osm0sis to improve compatibilty with all Roms out there. Enjoy!
Changelog:
- Merged CM changes
- Added lionfish governor by squid2
- Added system wide power efficient workqueues
- sched/fair: Implement fast idling of CPUs when the system is partially loaded
- block: bfq: set IOPS mode by default with slice_idle set to 0
- lib/memcopy: use glibc version
- Optimized Square root algorithm
- Some other changes(Check github)
Download: BASKETBUILD
Click to expand...
Click to collapse
Working fine here on stock rom. Optimus is my daily drive. It meets my requirements :good:

Going to flash and report back. Thanks flashhhh for the update

Fluid UI
This kernel is now my daily driver. My UI doesn't lag anymore like other kernels and my games seem a tad smoother ( Most likely a placebo). Keep up the good work flashhh

Just wondering am on cm12.1 is compatible or just for m?

Anyone ready to port a kernal [Wicked Witch Kernal][developers wanted]

# Your warranty is now void.
# I am not responsible for bricked devices, dead SD cards, Thermonuclear war, or you getting fired because the alarm app failed.
# Do some research if you have any concerns about features included in this kernal before flashing it! #You are choosing to make these modifications, and I'm not responsible for anything you do to your device, I don't care.
Features
Compiled with Linaro 7.2.x Toolchain (Optimized for Cortex-A53)
Linux version 3.18.83
Android 8.0 Oreo support
CAF tag 'LA.UM.5.6.r1-05300-89xx.0
DoubleTap2Wake
Kernel Sampage Merging (KSM)
Fingerprint sensor boost driver
exFAT Support
Slimbus OC
Faster bootup
Low power consumption
Better performance
Disabled CRC check (up to 30% faster I/O)
USB Fastcharge
Intellithermal Driver
Spectrum support
Adreno Idler
KCAL v2 colour control
Sound Control
Qnovo charging driver for maintaining temperature
Boeffla wakelock blocker
Switch for Fsync
CRC & SHA256 crypto algorithms
Vibration intensity control
F2FS support
Early suspend driver
Removed safetynet flags (no need of magisk to bypass safteynet)
Blocked many wakelocks
HZ 1000 for best battery & performance
Adreno boost
Tweaked interactive governor
Quick wake up driver
Arch power
Works in both AOSP/LineageOS based ROMs
Governors : alucard, darkness, nightmare, blu_active, conservative, ondemand, userspace, powerspace, interactive(default), performance, chill, electron, relaxed
I/O Schedulers : noop, deadline, cfq, bfq, fiops, sio, maple(default), zen
TCP congestion algorithm : cubic, reno, westwood(default), bic, htcp, highspeed, vegas, veno, scalable, lp, yeah, illinois
Download link
https://drive.google.com/file/d/1q88m-N_pwHcmrLWFqPy72TAQpd-PQrsA/view?usp=drivesdk

Anyone ready to try?

Wonder Wicked Witch said:
Anyone ready to try?
Click to expand...
Click to collapse
No offence dude but why don't you try it on your own device? Also I missed sources link in OP.
Sent from my Lenovo P2 using Tapatalk

abhayruparel said:
No offence dude but why don't you try it on your own device? Also I missed sources link in OP.
Click to expand...
Click to collapse
Just got bootloop for los and los based roms, so that I made the download link unavailable. After fixing it download link will be made open. Sorry for creating the thread to fast without fixing bugs.

abhayruparel said:
No offence dude but why don't you try it on your own device? Also I missed sources link in OP.
Click to expand...
Click to collapse
Link for port download https://drive.google.com/file/d/1q88m-N_pwHcmrLWFqPy72TAQpd-PQrsA/view?usp=drivesdk

Can you make overclock kernel please..
Because there is no kernel available now

Shreyash01 said:
Can you make overclock kernel please..
Because there is no kernel available now
Click to expand...
Click to collapse
Yes i agree we want a overclocked kernel

Instead of begging and moaning like a babies maybe build it yourself if you really want it and stop bumping this old thread.
Also:
>SD625
>overclock
Select on

Brooo

List of features seems interesting

Can you add Hot Plug?

Is these kernel working now?

[EAS][ATOS][KERNEL][SAKURA]Atos-Kernel [3.18] - EOL

Code:
#include <std_disclaimer.h>
/*
* Your warranty is now probably void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
I am new to kernel development so please don't be harsh in reviews.
This kernel derived from ThunderStorm. And add more Customization
Compile using DragonTC Clang 10 (Based on LLVM 10.0.0svn)
Features:
- Energy Aware Scheduling (EAS) *What is EAS? See here
- Kernel Upstream To 3.18.140
- Selinux Permissive
- CPU OC 2208 MHz
- GPU OC 725 MHz
- Vibration intensity control
- Fsync: on/off support
- Improved interactive governor
- Improved CPU boost
- Improved RCU boost
- Improved conservative governor
- USB Fast Charge (when use USB from laptop)
- Many memory improvements
- Vibration intensity control
- KCAL color control
- DTS Sound
- Audio codec quality improved
- I/O optimization
- I/O schedulers:
noop
deadline
cfq (default)
zen
maple
- EAS CPU Governors :
- Schedutil
- CPU Governors:
alucard
alessa
blu_active
zzmoove
darkness
zzmove
interactive (Default)
ondemand
userspace
powersave
lionheart
performance
- GPU Governor:
spdm_bw_hyp
bw_hwmon
venus-ddr-gov
msm-vidc-vmen
msm-vidc-ddr
bw_vbif
gpubw_mon
msm-adreno-tz (default)
cpufreq
userspace
powersave
performance
simple_ondemand
- Power Suspend Mode
Autosleep
Userspace
LCD Panel
Hybrid
- And more features ​
Installation:
- Reboot Custom Recovery (TWRP / OrangeFox)
- Backup boot, system, vendor
- Install Kernel
- Reboot system
Bugs :
Looking for another bug
Download:
EAS Version:
EAS-Atos-Kernel-Sakura-v10.1
Standard Version:
Atos-Kernel-Sakura-v10
Atos-Kernel-Sakura-v10-Overclock
Tested On Miui EU Beta and Stock Mi A2 Lite (Port for Sakura)
*NOTES: Use SmartPack Kernel Manager for more experience with this kernel
*Attention : Only install this kernel on roms with prebuilt 3.18 kernel !
Like my work? U can support me here: Paypal
Thanks TO :
Thundestorm Kernel for base
AnyKernel2 for Flashable ZIP
Some my kernel testers
And thanks to anyone for telling me bug this kernel
And you
Leave thanks if you like this Kernel
Code:
Changelog
v10.1
Bring up EAS [B] [I]*What is EAS? [URL="https://developer.arm.com/tools-and-software/open-source-software/linux-kernel/energy-aware-scheduling"]See here[/URL][/I][/B]
New EAS CPU Governor : Schedutil
Remove some standard cpu governor, now only EAS Cpu Governor
v10
Change version kernel
Add Klapse 5
mdss_fb: add lcd backlight min limit
Remove useless CPU Governor
New compiler using DraginTC Clang 10 (Based on LLVM 10.0.0svn)
BACKPORT: clang cross build support
Makefile: Some changes for GCC
kbuild: clang: remove crufty HOSTCFLAGS
kbuild: clang: fix build failures with sparse check
kbuild: Add support to generate LLVM assembly files
kbuild: clang: add -no-integrated-as to KBUILD_[AC]FLAGS
And some improvement
v69.9e
Merge from CAF 'LA.UM.7.6.r1-05500-89xx.0'
Merge Staging Prima 'LA.UM.7.6.r1-05500-89xx.0'
Add Thermal Control
Add Voltage Control
And more Improvement
v69.9a
Now can use on custom ROM with kernel 3.18
v69.9
Fixed brightness issues for MIUI from version v69.8b
Add more CPU governor
Add more IO Schedulers
- v69.8b
Some Improvement and More Stability
Added DTS Eagle
Test compile for custom Rom with kernel 3.18
- v69.8-Beta
CPU OC 2208 MHz
GPU OC 725 MHz
Add USB Fast Charge (when using USB from a laptop)
Add CPU Governor (Alessa)
- v69.7-Beta
Fix missing driver
- v69.6
GPU OC 750MHz
Some improvement
- v69.5
Fixed no sound during a call
Added more CPU and GPU Governor
- v69.4
SELinux Permissive
Fixed Flashlight QS toggle
- v69.3
Added More CPU Governor
Added More GPU Governor
Fixed Wifi
And etc I forget :)
- v69.2
Booted, but a lot of bugs
- v69.1
Initial Release
Not booted
XDA:DevDB Information
SAKURA Atos Kernel, Kernel for the Xiaomi Redmi 6 Pro
Contributors
Okta. Pra A
Source Code: https://github.com/okta-10/kernel_xiaomi_msm8953-sakura-atos
Kernel Special Features: Energy Aware Scheduling (EAS), Overclock CPU & GPU, DTS Eagle
Version Information
Status: Stable
Current Stable Version: v10 - (3.18.140)
Stable Release Date: 2019-07-02
Current Beta Version: v10.1 - (3.18.140)
Beta Release Date: 2019-09-15
Created 2019-06-15
Last Updated 2020-08-12

Reserved

Nice to see a kernel dev in here!And a new MIUI kernel!Congrats and keep up the good work!
On a side note,do provide a detailed changelog so that others may find your kernel more
interesting and know exactly what features are there in the kernel

Nice to see a new kernel.
Is it for pie or for oreo.

Update
Atos Kernel v69.4
Changelog:
- Selinux Permissive
- Fix flashlight QS Toggle
Download: Stable v69.4

darkhzy_kh said:
Nice to see a kernel dev in here!And a new MIUI kernel!Congrats and keep up the good work!
On a side note,do provide a detailed changelog so that others may find your kernel more
interesting and know exactly what features are there in the kernel
Click to expand...
Click to collapse
Hi, Thank you for his advice , i am very happy, but now i have added some Changelog , thank you before

deepak kumar android said:
Nice to see a new kernel.
Is it for pie or for oreo.
Click to expand...
Click to collapse
Thank you, work fine in MIUI Pie, so please just try in miui oreo the own risk

:good: Thanks

ananxd said:
:good: Thanks
Click to expand...
Click to collapse
You're welcome, bro

Update
Atos Kernel v69.5
- Fixed no sound during call
- Added more Cpu and Gpu Governor
Download: Stable MIUI Atos Kernel v69.5

Will try tomorrow.

ananxd said:
Will try tomorrow.
Click to expand...
Click to collapse
Yes, try it

I don't see any commits
https://github.com/OktapraAmtono/kernel_xiaomi_msm8953-sakura-atos/commits/atos-miui

ndrancs said:
I don't see any commits
https://github.com/OktapraAmtono/kernel_xiaomi_msm8953-sakura-atos/commits/atos-miui
Click to expand...
Click to collapse
Coz he merged all of them into one

ndrancs said:
I don't see any commits
https://github.com/OktapraAmtono/kernel_xiaomi_msm8953-sakura-atos/commits/atos-miui
Click to expand...
Click to collapse
darkhzy_kh said:
Coz he merged all of them into one
Click to expand...
Click to collapse
Yeah,, , , actually because i don't know use github, just create repository... ??
I just compile from my local computer ?
So sorry ??

After installing on ????, the sensor stopped working. Can not unlock. Put the kernel of another developer - it works well.

z20010 said:
After installing on ????, the sensor stopped working. Can not unlock. Put the kernel of another developer - it works well.
Click to expand...
Click to collapse
Whats ur use miui version?
On latest miui eu beta working fine

z20010 said:
After installing on ????, the sensor stopped working. Can not unlock. Put the kernel of another developer - it works well.
Click to expand...
Click to collapse
same as me, last miui.eu beta

Okta. Pra A said:
Whats ur use miui version?
On latest miui eu beta working fine
Click to expand...
Click to collapse
??????? 10 9.6.13

z20010 said:
??????? 10 9.6.13
Click to expand...
Click to collapse
Try instal without module, ektrack kernel then delete all file on system/lib/modules...
before install kernel u need restore system