[KERNEL][7.x][CM/AOSP] Optimus Kernel R21 [OSPREY][1/4/17] - Moto G 2015 Original Android Development

OPTIMUS KERNEL​
Hi guys, this is Optimus kernel for Osprey. This is a simple kernel upto date with CM & msm-3.10 branch of CAF.
Only necessary features will be added. This is for Nougat only. Works on CM/AOSP Roms. Enjoy!
Code:
Disclaimer:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
FEATURES:
- Updated to latest CM-14.1 Sources
- Built with custom tailored Linaro-5.4.1 toolchain (cortex-a53 neon-vfpv4 hard-float targeted, build with latest Crosstool-NG)
- Synced with latest CAF and motorola changes
- Device specific Cortex-A53 tweaks & Linaro optimizations
- Overclock available upto 1.6 GHz (Boots with stock frequencies)
- Added Lazyplug driver
- Added LiveDisplay Driver
- random: squashed entropy tweaks & optimizations
- Added Optimus governor (default gov)
- Added sound control
- Added zen,tripndroid & sioplus I/O schedulers
- Added Fsync ON/OFF Control
- Added USB Fast Charge option
- Added toggles for disabling wlan wakelocks
- Optimized ARM RWSEM Algorithm
- Optimized Square Root Algorithm
- Optimized AES and SHA1 routines with neon support
- KGSL & Devfreq patches
- Disabled CRC check: 30% Performance boost
- Merged upstream ARM,crypto changes
- VFP HardFloat
- Updates to zram,zsmalloc,irq etc
- Sched & Cpufreq Tweaks
- Removed some debug and logging options
- Enabled Advanced TCP Congestions
- CM Profiles compatibility
- Many more (check github)
How to Flash:
1. Download the kernel and place it into your phone storage
2. Reboot into recovery
3. Install the kernel
4. (optional) Wipe Dalvik/ART Cache and Cache partitions
5. Reboot and enjoy!
You need ROM's default kernel before flashing this as this kernel uses Anykernel2 by @osm0sis (huge thanks to him). Make sure you have it otherwise clean flash the kernel with the rom to avoid any issues.(At least dirty flash rom+kernel)
DOWNLOAD:
AFH
Special thanks to @Alberto97 @squid2 @franciscofranco @flar2 @myfluxi @eng.stk @hurtsky @Imoseyon @neobuddy89 @frap129
XDA:DevDB Information
Optimus Kernel, Kernel for the Moto G 2015
Contributors
Flashhhh
Source Code: https://github.com/desaishivam26/Optimus_Osprey
Kernel Special Features:
Version Information
Status: Beta
Created 2016-01-25
Last Updated 2017-02-26

More features will be added in future. Don't hesitate to make a feature request. Thanks!
Modded kernel adiutor apk: https://basketbuild.com/filedl/devs?dev=Flashhhh&dl=Flashhhh/KernelAdiutor.apk
Thanks to @martinusbe and GZR team for allowing me to use and distribute this apk

Will it be compatible with stock..?
Anyway another development work is really appreciated..

FPThatea said:
Will it be compatible with stock..?
Anyway another development work is really appreciated..
Click to expand...
Click to collapse
Needs testing. I have only tested kernel on CM13

Flashhhh said:
Needs testing. I have only tested kernel on CM13
Click to expand...
Click to collapse
Oh.. Hope stock compatible version will come in future... ?

Flashhhh said:
Needs testing. I have only tested kernel on CM13
Click to expand...
Click to collapse
I'll test and report in 2-3 hours....
Sent from my Toilet using Moto G3....

Always happy to see development.

So Great Kernel From G1 and G2 Just landed for G3. Thank you so much.

What a surprise to see you here Flashhh.. Thanks a lot.

WiFi getting disconnected, everything else working on XT1550 CM13....
Sent from my Toilet using Moto G3....

Tested working fine on stock rom. WiFi is also functional. Glad to see my missed stuff from G1 is bought to G3 Thanks again.
One request: if u could add SMARTMAX that you used in G1. It was perfect and best balance of backup and performance.
Besides this hotplug (Fast lane hotplug if possible).
Without hotplug also its going good. Have set min freq to 400MHz and now scaling looks under control without ramping to highest 1.3GHz Wow..! Even after making interactive to be more conservative, the performance is soo buttery smooth. That's lovely.

Hey Flashhhh! Nice to see you here Still using your optimus kernel on my G1

==vj== said:
Tested working fine on stock rom. WiFi is also functional. Glad to see my missed stuff from G1 is bought to G3 Thanks again.
One request: if u could add SMARTMAX that you used in G1. It was perfect and best balance of backup and performance.
Besides this hotplug (Fast lane hotplug if possible).
Without hotplug also its going good. Have set min freq to 400MHz and now scaling looks under control without ramping to highest 1.3GHz Wow..! Even after making interactive to be more conservative, the performance is soo buttery smooth. That's lovely.
Click to expand...
Click to collapse
Yeah I'll add necessary governors only. I won't be adding any hotplug. We are going to stick with msm_performance. I've already merged tweaks to msm_performance for better performance and stability

CPU and GPU OC
Used your kernel on the g2 now the G3. Nice to see more kernel development. Will flash and report back
Is there any way of implementing CPU/GPU OC?

Flashhhh said:
Yeah I'll add necessary governors only. I won't be adding any hotplug. We are going to stick with msm_performance. I've already merged tweaks to msm_performance for better performance and stability
Click to expand...
Click to collapse
That's great honestly I haven't noticed any extra saving on battery backup by offlining of cores on this phone. The stock kernel running without offlining used to still do the best in backup.
So yes I strongly agree.

Updated the Kernel to R2!
Now this kernel uses Anykernel2 by osm0sis to improve compatibilty with all Roms out there. Enjoy!
Changelog:
- Merged CM changes
- Added lionfish governor by squid2
- Added system wide power efficient workqueues
- sched/fair: Implement fast idling of CPUs when the system is partially loaded
- block: bfq: set IOPS mode by default with slice_idle set to 0
- lib/memcopy: use glibc version
- Optimized Square root algorithm
- Some other changes(Check github)
Download: BASKETBUILD

Flashhhh said:
Updated the Kernel to R2!
Now this kernel uses Anykernel2 by osm0sis to improve compatibilty with all Roms out there. Enjoy!
Changelog:
- Merged CM changes
- Added lionfish governor by squid2
- Added system wide power efficient workqueues
- sched/fair: Implement fast idling of CPUs when the system is partially loaded
- block: bfq: set IOPS mode by default with slice_idle set to 0
- lib/memcopy: use glibc version
- Optimized Square root algorithm
- Some other changes(Check github)
Download: BASKETBUILD
Click to expand...
Click to collapse
Working fine here on stock rom. Optimus is my daily drive. It meets my requirements :good:

Going to flash and report back. Thanks flashhhh for the update

Fluid UI
This kernel is now my daily driver. My UI doesn't lag anymore like other kernels and my games seem a tad smoother ( Most likely a placebo). Keep up the good work flashhh

Just wondering am on cm12.1 is compatible or just for m?

Related

[Kernel] [Uber 5.2] Butter kernel {GPe 5.1} {01/09/2015}

Butter Kernel​
Presenting Butter kernel, a custom kernel built with many optimizations and tweaks. This kernel will work on Stock lollipop GPe devices. The main aim is to provide a stable kernel with optimizations and some features.
Custom Features:
- Updated to latest GPe Sources
- Bumped to 3.4.108
- Compiled With Custom Uber 5.2 Toolchain
- Compiled With -O3 & Graphite Flags
- Compiled With Strict-Aliasing & Cortex A7 Tweaks
- Various Other Build Optimizations
- Replaced Qcom's hotplug binary with mpdecision
- GPU underclock/overclock(Min:100 MHz & Max:533 MHz)
- Add dev/frandom
- Added Support for Kernel Neon Mode
- Enabled Pipe Flag
- IntelliThermal V2 by Faux
- Simple GPU Algorithm
- Add BioShock/DanceDance Govs
- Added SmartMax/LionHeart Govs
- LCD Kcal Control by Savoca
- Faux's Sound Control
- CpuFreq and CpuBoost Optimizations
- Disabled Gentle Fair Sleepers
- Enabled Many TCP Congestions
- Added SIO,VR & ZEN IO Scheduler
- Sched & Mutex Tweaks
- Pushed Read Ahead value to 512
- Enabled FSync by default
- SELinux set to PERMISSIVE
- Power Efficient WorkQueues
- Reclaimed RAM from loggers
- Many more things (Check Github)
Disclaimer:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.​
DOWNLOADS:
AndroidFileHost
How to Flash:
1. Download the kernel and place it into your phone storage
2. Reboot into recovery
3. Install the kernel
4. Wipe Dalvik/ART Cache and Cache partitions
5. Reboot and enjoy![/B][/U]
I would like to thank @Flashhhh for this kernel. He has and promises to continue helping me with kernels. This wouldn't have been possible without him at all. Besides, I've also kanged commits from him (with his permission)
PLEASE DON'T MIRROR THE LINK
XDA:DevDB Information
Butter kernel for GPe 5.1, Kernel for the Moto G
Contributors
Aayushya, Flashhhh
Source Code: https://github.com/Aayushya/kernel-msm
Kernel Special Features:
Version Information
Status: Alpha
Created 2015-09-01
Last Updated 2015-09-01
Reserved.
P.S: Looking for someone to make me a good banner to go with this Kernel. If interested, please PM me
Nice work
Flashed it on non-GPE Stock Brazil 5.1. Successfully booted with /f2fs partition.
iDynamics said:
Flashed it on non-GPE Stock Brazil 5.1. Successfully booted with /f2fs partition.
Click to expand...
Click to collapse
Was it a single sim or dual one?
yeshwanthvshenoy said:
Was it a single sim or dual one?
Click to expand...
Click to collapse
Single sim.
iDynamics said:
Flashed it on non-GPE Stock Brazil 5.1. Successfully booted with /f2fs partition.
Click to expand...
Click to collapse
Idem here!.
Well congrats on this new beauty. After long time i see faux stuff for official ROMs. lolz but you forgot to thanx faux for his hotplug
MP Decision options are missing in kernel tweaker. All cores stay online. Thanks for the wonderful work.
O that note...the battery is killing itself.
Waiting for a fix.
iDynamics said:
MP Decision options are missing in kernel tweaker. All cores stay online. Thanks for the wonderful work.
Click to expand...
Click to collapse
in synapse it appears. But some options do not appear as intellithermal
@Aayushya any updates to this

[KERNEL][AOSP/CM][~5.0+|cm-12.0+][N7100] Void Kernel (1.9.1)

As always:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Hi to all i'm here to share with you (and with the community) my kernel based on haxynox/ivan_meler arter97 sources(instead of cm sources)!
this is not a super kernel with a lot of features... the main goal of this project is to have a stable kernel with some a lot of features
This is a kernel based on stock sources for AOSP/CM roms!
However bug reports (with logs), rewiews, ... are always welcome!
Features:
based on arter97 kernel
builded on archlinux debian sid
LZMA compressed kernel
AnyKernel2 (should support all CM roms)
A lot of optimizations, backports, improvements, ... (check the github gitlab repo!)
Led control
Changer control
Taskstats (iotop support)
I/O Schedulers: noop deadline [cfq] bfq sio vr fifo zen
Governors: intelliactive smartassV2 interactive zzmoove conservative powersave [pegasusq] performance
Tcp Congestion Controls: [westwood] reno bic cubic highspeed hybla htcp vegas ven scalable lp yeah illinois
NTFS support
USB OTG support
Full F2FS support (backported from Linux 4.2+) (kernel side + fstab)
Improved colors and mdnie control
Boeffla sound
Tap2wake and Doubletap2wake
Synapse support (install the app)
CPU overclock up to 2160 MHz and underclock down to 100 MHz
CPU undervolt interface
GPU overclock/underclock
GPU undervolt
ARM CPU Topology (sched_mc)
Enable/Disable speaker when camera app is open
Click to expand...
Click to collapse
Changelog:
v1.9.1
bring back mdnie control and improved colors
install busybox (without symlinks) if not already installed
force to use busybox for everything related to synapse and use /system/bin/sh as shell
misc fixes for synapse
Installing busybox manually is not required anymore for synapse, this build is also an attempt to fix the various issues with synapse reported by some users
Click to expand...
Click to collapse
v1.9.0
first public build compiled on debian sid
update everything for the gitlab switch
use LZMA compression
support for the new hwc (tilak rom)
remove old settings for vibrator intensity and use the lineageos one
remove mdnie settings and use lineageos one (currently broken)
v4l2 and fb updates for the new hwc
misc updates from https://github.com/fourkbomb/android_kernel_samsung_smdk4412/commits/cm-14.1-rebase
full build system and template (install zip) revamp
import latest AnyKernel2 updates
the kernel now installs a custom fstab
the original branches and the -new ones are now merged as the build system detects when the modules support is needed
pegasusq boost support
reboot to recovery when a kernel panic happens (if the kernel crashes it will go to recovery automatically)
v1.8.6
misc updates
wifi hotspot fix for android 7.0
v1.8.5
misc kernel updates
now kernel releases without modules are built separately, check for the -new flag in the zip name (for android 7.0 and up)
second attempt to fix wifi on android 7.0
v1.8.4
wifi should work on nougat now
v1.8.3
android 7.0 support (experimental, untested use at your own risk)
security updates
misc bug fixes
v1.8.2
from now when you are using aosp this zip will install only synapse (aosp has already this kernel)
v1.8.1
Candysix issues fixed
updates from cyanogenmod kernel
v1.8.0
overclock support up to 2160 MHz
debug reduced (a lot!!)
re-added synapse governor tab
re-added frandom
updates from CyanogenMod kernel
finally fixed usb otg (now works always not only the first time after boot)
option to enable swap and zram (only for advanced users)
removed adaptive body bias
other changes
from the old arter97 kernel (before 5.0):
removed memory throttling
cpu unaligned accesses
AIO changes
v1.7.3
Synced with dev branch
Switched back to google gcc 4.8 (the android default one)
Removed samsung changes to ondemand governor
Enabled ondemand
And take a look at this
v1.7.2
Fix synapse freeze when changing governor
Removed negative mode toggle
v1.7.0
Rebased on arter97 kernel (full and proper upstream to 3.0.101, including dma_cma) (big thanks to arter97)
Builded with GCC 5.3
New governors: smartassV2 interactive conservative
New I/O schedulers: sio vr fifo zen
Enabled dma_cma (better memory management)
Enabled embedded exfat driver (i won't provide support for this, if you are still using exfat it's time to switch to something new!)
Minor fixes (like touchkeys remaining active sometimes)
Synapse now supports zzmoove profiles
Synapse minor changes
Other misc changes
1.6.4-4806461
Updates from cyanogenmod kernel
Revert busfreq changes
Misc changes
1.6.3-22afe8b
New option for touchwake by me (charging_mode, enable touchwake only on charging)
Synapse minor changes (frequency monitor added)
1.6.2-68fa049
New led control (supports led brightness!)
New f2fs! (Backported from Linux 4.2+, thanks to arter97)
Removed logger and logger mode (logcat driver in the kernel is not needed anymore on android 5.0+)
Enabled NFS client and CIFS (experimental, an arter97 user reported a sunrpc kernel panic)
Other minor changes
1.6.1-294f21d
Enabled Asynchronous I/O
1.6.0-2ff4fd9
CPU clock: 1600 - 200 -> 1800 - 100
CPU undervolt interface
GPU overclock and undervolt
ABB (adaptive body bias)
ARM architecture updates
A lot of other optimizations
ARM CPU topology (sched_mc readded)
toggle negative mode with 4 taps on home button (tap fast!)
Camera shutter sound control (disable speaker when camera app is open)
Intelliactive from arter97 kernel
Cleaned up MIF/INT (busfreq) code
synapse updated (too many changes to list check by your self)
A lot of other changes
release5-7096c91
update synapse
misc changes
release5-eb6898c
synapse support boeffla sound
release5-ee27b5f
synapse support (beta) (for boeffla use his app!)
removed sched_mc
pre-release5-7d34ddc
wait this is a pre-release because it doesn't have synapse support, this will be added in the release5
enabled deadline and bfq io schedulers (deadline as default)
enabled all tcp congestion controls (westwood as default)
sched_mc (multicore power saving)
some tweaks from boeffla kernel (thaks to andip71!)
release4-f240f37
revert to f2fs from cyanogenmod
f2fs support (fstab) now you don't need anymore a rom that support f2fs natively
misc updates
release4-dcd9a36
fixed touchkeys always on
release4-d1728a6
rebased kernel oon new Nameless one (changes are a lot!)
logger-interface
new f2fs! (imported from here)
release3-3dda06e
tap2wake and doubletap2wake
ZZMoove 1.0 beta8
release2-e21b17d
updates from cyanogenmod kernel
disabled samsung_extdisp driver (source of bugs, more info: https://github.com/NamelessRom/android_kernel_samsung_smdk4412/commit/3597c6bf57e82df92fdaa3db215ab3640f00c888)
boeffla sound 1.6.7
mdnie control and master sequence
f2fs (kernel side support)
some debug removed
release1-d1a9259
initial release
Click to expand...
Click to collapse
Coming features:
you tell me
Click to expand...
Click to collapse
Bugs:
none so far (for touchwake read this: http://forum.xda-developers.com/showpost.php?p=66179198&postcount=46)
Click to expand...
Click to collapse
Obviously you can use the sources of this kernel but i won't provide support if you want to build it on windows (cygwin) or on mac
You must use LZMA compression if you want to use this kernel for building a recovery otherwise the image won't fit the ~8 MB partition of our device
WARNING #1
if you want to flash phh's superuser (i use this) then flash first the superuser zip and after the kernel otherwise the rom won't boot
if you use SuperSU the order of flash doesn't matter
WARNING #2
Don't flash this kernel over an another custom kernel
Before flash make sure to have a way back (backups, dump, ...) and if you want to revert back to default kernel of your rom simply reflash the rom zip
WARNING #3
Remember that the some features can ruin/break some parts of your phone here are some examples:
changing voltages supplied to the battery
overclock/undervolt of cpu/gpu
too high volume in boeffla sound
too high vibration strenght
as the disclaimer says is at your own risk!
Downloads:
https://gitlab.com/ParanoidNote/void-kernel/tags (click on a tag to see the full release notes)
old downloads: https://github.com/ParanoidNote/void-kernel/releases
Click to expand...
Click to collapse
Credits:
Linus Torvalds
arter97
JustArchi
andip71 (LordBoeffla)
AndreiLux
yank555-lu
faux123
MarcKe
Ivan Meler
Evisceration
dhiru1602
fourkbomb
and all people here
Click to expand...
Click to collapse
XDA:DevDB Information
[KERNEL][AOSP/CM][5.0+|cm-12.0+][N7100] Void Kernel, Kernel for the Samsung Galaxy Note II
Contributors
ParanoidNote
Source Code: https://gitlab.com/ParanoidNote/void-kernel/commits/master
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.9.1
Stable Release Date: 2017-04-27
Created 2016-03-22
Last Updated 2017-04-27
ParanoidNote said:
As always:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Hi to all i'm here to share with you (and with the community) my kernel based on haxynox/ivan_meler sources!
this is not a super kernel with a lot of features... the main goal of this project is to have a stable kernel with some features
However feature requests, bug reports (with logs), rewiews, ... are always welcome!
but THESE won't be added:
governors (pegasusq has tunables use them)
undervolt and overclock (unstable)
adaptive body bias (ABB)
gpu controls
io schedulers
F2FS (for now)
so the features are:
builded on archlinux
toolchain: https://launchpad.net/gcc-arm-embedded (gcc-arm-none-eabi-4_9-2015q3)
LZO compressed kernel
AnyKernel2 (should support all AOSP roms)
led control and led fading as default (thanks arter97)
changer control
taskstats (iotop support)
io schedulers: [noop] cfq
governors: [pegasusq] performance
tcp congestion controls: [cubic] reno
NTFS support
USB ethernet support
Joystick support (xpad, tablet, ...)
USB OTG support
coming features:
mdnie control
boeffla sound
you tell me
bugs:
none so far
Configuration app? i use terminal but if want you can use Kernel Adiutor of Trickster MOD apps however these won't cover all the features provided by this kernel
Obviously you can use the sources of this kernel but i won't provide support if you want to build it on windows (cygwin) or on mac, this is a linux kernel
You must use LZMA compression if you want to use this kernel for building a recovery otherwise the image won't fit the ~8 MB partition of our device
WARNING
if you want to flash phh's superuser (i use this) then flash first the superuser zip and after the kernel otherwise the rom won't boot
if you use SuperSU the order of flash doesn't matter
Downloads: https://github.com/4rch0x0/android_kernel_samsung_smdk4412/releases
Credits: all people here
XDA:DevDB Information
[KERNEL][~5.0+][N7100]Modded Stock Kernel, Kernel for the Samsung Galaxy Note II
Contributors
ParanoidNote
Source Code: https://github.com/4rch0x0/android_kernel_samsung_smdk4412/commits/master
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: release1-d1a9259
Stable Release Date: 2016-03-22
Created 2016-03-22
Last Updated 2016-03-22
Click to expand...
Click to collapse
For that Rom you need this kernel and can be installed?
Piombo71 said:
For that Rom you need this kernel and can be installed?
Click to expand...
Click to collapse
you can install this kernel on all aosp roms (cyanogenmod, temasek, resurrection remix,...)
it's means this kernal is available for the porting of TW 5.1.1 of N7100?
Leric said:
it's means this kernal is available for the porting of TW 5.1.1 of N7100?
Click to expand...
Click to collapse
Really????
Leric said:
it's means this kernal is available for the porting of TW 5.1.1 of N7100?
Click to expand...
Click to collapse
No this is a kernel for aosp roms (it is based on stock sources) sorry this kernel for now doesn't have a real name
ParanoidNote said:
No this is a kernel for aosp roms (it is based on stock sources) sorry this kernel for now doesn't have a real name
Click to expand...
Click to collapse
all right... thank you
WOW! a new kernel for our note 2 thank you dev! keep it up
P.S. :3 is there any possibility to get dt2wake?
Download link death
zeratull said:
Download link death
Click to expand...
Click to collapse
works now thanks
Stavrosfil said:
WOW! a new kernel for our note 2 thank you dev! keep it up
P.S. :3 is there any possibility to get dt2wake?
Click to expand...
Click to collapse
ok i will try but i remember that was causing issues in some older builds so i don't know if it will be added...
edit: got it working will be live in the next build!
Firstly great kernel and great thanks for implementing dt2wake.
BTW can I know how to disable single tap 2 wake and only use dt2wake. Thanks
maq06 said:
Firstly great kernel and great thanks for implementing dt2wake.
BTW can I know how to disable single tap 2 wake and only use dt2wake. Thanks
Click to expand...
Click to collapse
enable doubletap2wake (knockon) and tap2wake will be disabled automatically
first enable tap2wake (echo 1 > /sys/class/misc/touchwake/enabled) and after enable knockon (echo 1 > /sys/class/misc/touchwake/knockon)
@ParanoidNote I'm using your kernel in the latest crDroid build, but I'm not sure how to use the dt2wake feature. How can I enable it?
andrewKode said:
@ParanoidNote I'm using your kernel in the latest crDroid build, but I'm not sure how to use the dt2wake feature. How can I enable it?
Click to expand...
Click to collapse
read the posts above
ParanoidNote said:
read the posts above
Click to expand...
Click to collapse
Sorry but I'm not blind. I did read the post above and tried that but it still doesn't work.
Trimis de pe al meu GT-N7100 folosind Tapatalk
andrewKode said:
Sorry but I'm not blind. I did read the post above and tried that but it still doesn't work.
Trimis de pe al meu GT-N7100 folosind Tapatalk
Click to expand...
Click to collapse
ok open a terminal, and type:
su
echo 1 > /sys/class/misc/touchwake/enabled
echo 1 > /sys/class/misc/touchwake/knockon
echo 60 > /sys/class/misc/touchwake/delay (delay after the screen goes off)(optional)
if this doesn't work try to reflash the kernel and repeat the procedure above
however i will post in the main thread a sample init for configure the kernel at boot (enable dt2wake, boeffla, zzmoove,...)
ParanoidNote said:
enable doubletap2wake (knockon) and tap2wake will be disabled automatically
first enable tap2wake (echo 1 > /sys/class/misc/touchwake/enabled) and after enable knockon (echo 1 > /sys/class/misc/touchwake/knockon)[/QUOTE
I followed your instructions but
It doesn't seem to work.
I can't able to disable tap 2 wake and only use d2wake.
Click to expand...
Click to collapse
Thank you very much for supporting this device

[Kernel][GPL][K-N][Falcon][UBER TC]ZER0 Byte Kernel[Nightlys][CM/AOSP]

READ ALL BEFORE ANYTHING!
ATTENTION
Code:
/*
I'm not (yet) a developer , I'm taking effort to put more choices of kernel for our great community.
This kernel is tweaked for best balance possible, if you want a feature quote me and i will see what i can do,
I will build this kernel when possible on my free time and because of it is a nightly and I will use this thread as a worklog too.
Thank you for using this kernel.
*/
Disclaimer
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Adapt, improve and evolve!​
Info:
Guys I created this kernel to Moto G 2013 (Falcon/Peregrine) and Moto G 2014 (Titan/Thea) in other words MSM8226 Motorola SoC baseds to learn, adapt some "unstable and unsafe" things as well to give a new life to my device, the plan is to support all Android versions avaliable for our device, I plan to do a better kernel with time and help of the comunity. This kernel is a nightly I will do it when I have a freetime or LineageOS update their sources or I add new features, it aims to be a rich feature kernel and a "perfection balance" between battery life and performance, this can be a UNSTABLE kernel, my routine will be build,upload and test, so stay tuned! I am open to suggestions. This is a kernel that don't work out-of-the-box the objetive of this kernel is give power to the user.
This kernel DO NOT WORK WITH STOCK MOTOROLA/GOOGLE PLAY EDITION ROM or IDCRISIS or AOSPARADOX.
On post 1:
#1 - Features and installation instructions
#2 - Downloads and kernel Source
#3 - Buglist and to do's
On post 2:
#1 - Changelog
​
Features (By now and latest one):
Based on 3.4.113 LTS Linux kernel and latest LOS/AOSP/CM/Motorola sources
Kexec hardboot patch (MultiROM support)
Governors: Interactive,Ondemand,Performance,Userspace,Conservative,Powersave
Hotplugs: AutoSMP and Alucard Hotplug
Overclocks and Underclocks (Attention this can be dangerous to your device! you have been warned!):
Overclocked CPU (up to 1.6Ghz),Overclocked GPU (up to 600Mhz) Overclocked RAM and Overclocked Slimbus for better audio
Intellithermal v2 to protect our device from heating
Sound: High performance Headset,Low latency playback Support,24 bits Playback Support,Enabled additional Moto G Exclusive Audio Channels TPA-a6165a2
Screen: DT2W and S2W/S2S, KCAL
GPU:Simple GPU Algorithm and AdrenoIdler
Misc: Init.d support, Fsync on/off, ARCH_Power, Gentle Fair Sleepers, Toggle for some wakelocks, Stereo Call Recording Support, Reclaim RAM from loggers, Powersuspend, State Notifier .
For full features list check my github.
Compiled with Arch Linux up-to-date and UBER Toolchain 4.9 and optimize flags[/COLOR]
Bootlogos
PREVIEWS ONLY CHECK DOWNLOADS SECTION FOR LINKS
Created by me and the others two by @Mattwmaster58:
Silver
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Blue
Red
Downloads
(Folder on AFH) (Please DO NOT MIRROR, if one is down just post in the thread or pm me and i will repair!):
Cyanogenmod/AOSP for Falcon:
CM14.1 (UNIFIED WITH CM13 BY NOW) - CM14.1
CM12.1 - CM12.1
CM11 - NOT YET
Cyanogenmod/AOSP for Peregrine:
CM14.1 (UNIFIED WITH CM13 BY NOW) - CM14.1
CM12.1 - CM12.1
CM11 - NOT YET
Cyanogenmod/AOSP for Titan/Thean (Same defconfig):
CM14.1 (UNIFIED WITH CM13 BY NOW) - CM14.1
CM12.1 - CM12.1
CM11 - NOT YET
NOTE:ALWAYS CHECK LAST PAGES TO SEE WHAT IS GOING ON!!!
LSpeed Profiles (OLD! LSpeed envolved too fast!) - Balance
Bootlogos: ZER0 Byte Bootlogo
Old releases of ZER0 and ZER0 Byte (Reborn) Kernel : AFH
Mirror: Github mirror and how to download
​
How to install
If you're on other kernel please at least DIRTY FLASH you ROM, thanks.
The kernel:
By recovery:
Using TWRP (Please use the latest one)
1. Put the zip at /sdcard > Reboot to recovery > Install > Chose the kernel zip > Confirm to flash > (optional) Wipe caches > Reboot.
or
By app:
2. Flash it using Flashify or similar app from Playstore.
The kernel scripts backup your current boot.img so if you want to restore just use Flashify or TWRP.
The Bootlogo:
Using TWRP (Please use the latest one)
1. Reboot to recovery > Install > Chose the bootlogo zip > Confirm to flash > Reboot and enjoy.
2. Flash it using Flashify or similar app from Playstore.
3. Extract the zip and on mfastboot (or just fastboot) enter this command: fastboot flash logo logo.bin
Recommendations/Tweaking
Gov Tuner a mod to tune govs based on profiles for better battery life, better performance, or a balance., I have added a lot of sound patchs but A.R.I.S.E. will blow your mind! so if you want a better sound on your Moto G I suggest you A.R.I.S.E the best one in my opinion or just Viper+Dolby. And the best of the best tweaks app LSpeed just download and select a profile from main screen and fell it! or tune it by yourself!
To tweak use Kernel Adiutor from Playstore (or XDA Link), the Kernel Adiutor-Mod (fork with more experimental features) at XDA or Synapse You will need this zip and download Synapse app from Playstore.
Info about tweaking kernel The best guide to it!
Better RAM management for FALCON/PEREGRINE/TITAN/THEA thanks to @Pupet_Master
-Download "Kernel Auditor" from the "Play Store" and open it
-Once inside, Swipe from left to right to show the side menu.
-Tap on "Low Memory Killer"
-Change to these custom settings:
Code:
Foreground Applications: 29mb
Visible applications: 61mb
Secondary Server: 157mb
Hidden Applications 227mb
Content Providers: 87mb
Empty Applications 191mb
-Swipe from left to right again and tap at the option "Virtual Memory"
-Change those settings from there:
Code:
dirty_ratio: 20
dirty_background_ratio: 5
dirty_expire_centisecs: 100
dirty_writeback_centisecs: 300
min_free_kbytes: 4096
oom_kill_allocating_task: 1
overcommit_ratio: 100
swappiness: 100
vsf_cache_pressure: 53
laptop_mode: 0
extra_free_kbytes: 24576
Z-RAM Disksize: 470mb
-Swipe from left to right again and tap at the "Profile" section
-Click at the "+" button and save the current settings on a new profile
-Holdon the new profile and choose the option "apply on boot"[/QUOTE]
This kernel does not ships with a default config, so here it is how to config (an example) a profile for battery/balance/performance:
Battery
Code:
On CPU
CPU Gov - Interactive
Max freq. - 1190Mhz or 1094Mhz
Multicore power save - Aggressive
Alucard Hotplug - ON
On GPU
GPU max freq. - 450Mhz or 320Mhz (if dont play use 320Mhz)
GPU Gov - simple_ondemand or msm_adreno_tz with tweaked adreno idler
On I/O Scheduler
Scheduler - ROW or SIO
-
Balance
Code:
On CPU
CPU Gov - Interactive
Max freq. - 1190Mhz
Multicore power save - Enabled
AutoSMP - ON
On GPU
GPU max freq. - 450Mhz
GPU Gov - msm-adreno-tz
On I/O Scheduler
Scheduler - ROW or ZEN
-
Performance
Code:
On CPU
CPU Gov - Interactive
Max freq. - 1593Mhz
Multicore power save - Disabled
AutoSMP - ON
On GPU
GPU max freq. - 600Mhz
GPU Gov - msm-adreno-tz
On I/O Scheduler
Scheduler - ZEN
Note about some features
Display types WORKING with DT2W/S2S/S2W:
mdss_dsi_mot_inx_720p_video_v0 (TITAN/THEA)
mdss_dsi_mot_cmi_720p_video_v2 (FALCON/PEREGRINE)
Display types NOT WORKING with DT2W/S2S/S2W:
mdss_dsi_mot_jdi_720p_video_v1 (TITAN/THEA)
mdss_dsi_mot_jdi_720p_video_v0 (TITAN/THEA)
mdss_dsi_mot_lgd_720p_video_v0 (FALCON/PEREGRINE)
If you don't have a working DT2W/S2S/S2W or don't like it you can disable it and/or use AcDisplay app or Anbient Display of your ROM instead.
To check which display type you have by going into terminal and type:
su
cat /proc/cmdline
Bugs
None by now, if you encounter one please make a post in this thread with steps to reproduce and if possible a LOGCAT and DMESG. A simple how to help me debug.
To do
Undervolt and Userspace Voltage Controller
OC of 1.8Ghz
More Hotplugs
More Govs
More I/O's (SIOplus,FIFO)
Added all features to all variants
Vibrator Intensity Control
Ram Underclock
Sched & Mutex Tweaks
Stock and GPE variants
WQ_POWER_EFFICIENT
LZO Compression image (Fast boot)
DOLBY_DAP dependency fix
Frandom
Filesystems support:
NTFS Support / EXT 2/3/4 support / F2FS (Most roms only support it at /data)
Optimized ARM RWSEM algorithm
Silence some logs
NEON in kernel mode
Misc Crypt tweaks
LMK tweaks and adaptive
More Security Patchs
Yankactive (Cause reboot at the moment),Yankdemand,Smartmax,Lionhert,Impulse,DanceDance,Bioshock
I/O's: ROW,NOOP,Deadline,CFQ,FIOPS,BFQ,SIO,VR,ZEN
All avaliable TCPs congestions on Android
How to git and build
Setting up and building
Basics of GIT
- How to build my kernel:
Code:
export ARCH=arm
export SUBARCH=arm
export CROSS_COMPILE=/path/to/toolchain/bin/arm-eabi-
make mrproper (cleans config files)
make clean (cleans already builded files)
make falcon_defconfig (or you device_defconfig)
make menuconfig (if you want to tweak the config)
make (I use this too -o2 -j4 CONFIG_DEBUG_SECTION_MISMATCH=y CONFIG_NO_ERROR_ON_MISMATCH=y)
How to cherry pick commits
Basically to cherry pick a commit you have to have it source and branch, this is a simple how to do it
First of all you need to set your upstream since it is a fork of CM/LOS or STOCK source:
Code:
git remote add upstream linkingithub.git
For example
Code:
git remote add upstream https://github.com/CyanogenMod/android_kernel_motorola_msm8226.git
so if you want to cherry pick a commit from me
Code:
git remote add bryanbytez mysourcelink.git
and after that you need to have my source locally but stay calm this wont mess you source
Code:
git fetch -all
To merge upstream changes (From CM/LOS or Motorola)
Code:
git merge upstream/cm-13.0
This will merge upstream cm branch cm-13.0 in your source code.
Misc help:
http://forum.xda-developers.com/showthread.php?t=2319018 (about boot.img, ramdisk and others)
https://stackoverflow.com/questions/2816715/branch-from-a-previous-commit-using-git (Unlike me you can just revert or create another branch based on the commit and not delete the whole source code )
https://stackoverflow.com/questions/4410091/github-import-upstream-branch-into-fork (Import a upstream branch on your fork)
And to revert a git: git revert sha1, example git revert eab5c8fef098548f0f00085196bbf40f41bf8ba1
​
Source/Credits
If you want to post this on your site or other forum it's okay just post a link to this thread too and the correct credits and if you can, pm me with link so i can see it too, thanks.
The GNU General Public License is a free, copyleft license for software and other kinds of works.
The GPL permits use, share, study and modify.
But this does not mean you should not give the deserved credit to the previous author.
So if you use my source code under GPL you must share with GPL too and quote me in the credits.
CM/LOS/AOSP Based Source
Stock/GPE Based Source
Thanks to:
GOD
The Real Dev's:
Motorola/Lenovo
LineageOS/CyanogenMod/AOSP/CAF Teams
A special thank you to @Kamin4ri to be answering questions from a noob
@hurtsky @pinkflozd @zakee94 @TeamMex (not a team ) @RenderBroken @alin.p @Flashhhh @Shivam Kuchhal @RolanDroid @attack11 @DC07 @frap129 @-decipher- @bedalus @MetalPhoenix45 @srisurya95 @para94 @chijure @Aayushya @neonkat and @faux123 for inspiration and commits (i guess that everyone that i pick a single commit is here... since i don't know yet to pick commits (picking commits automatically add the credits) a big thanks to all !)
@kwoktopus, for the tutorial how to build
And you the user!
If I forget someone please contact me and I will add here! [/FONT]​
XDA:DevDB Information
[Kernel][GPL][K-N][Falcon][UBER TC]ZER0 Byte Kernel[Nightlys][CM/AOSP], Kernel for the Moto G
Contributors
BryanByteZ
Source Code: https://github.com/BryanByteZero/android_kernel_motorola_msm8226
Kernel Special Features: OC/UC/DT2W/S2W/S2S/Sound Patchs and a lot more, check it!
Version Information
Status: Nightly
Current Stable Version: R3
Stable Release Date: 2017-02-22
Current Beta Version: R4
Beta Release Date: 2017-04-29
Created 2016-08-01
Last Updated 2017-05-01
Changelogs for CM/LOS/AOSP K/L/M/N
Changelogs for CM/AOSP K/L/M/N:
For Falcon and Peregrine
19/11/2016
No more MPDecision and CM PowerHAL
DT2W and S2W/S2S
Optimization Flags
Overclock and Underclock
Alucard Hotplug
AutoSMP Hotplug
Faux Sound 3.5
KCAL v2
High performance and low latency audio headset
KEXEC Hardboot patch
04/02/2017
Up-to-date with LOS source and Linux (now it's 3.4.113 the LTS version)
Intelliplug, AutoSMP and Alucard Hotplugs
Intellithermal
MSM-Limiter (you will need KernelAdiutor-MOD to use this feature)
Toggles for some wakelocks
ARCH_power
Gentle fair sleepers
Stereo call recording support
Reclaim RAM from loggers
Dynamic management of dirty page writebacks, expire and cache pressure
Some GPU patchs
SIO,VR,ZEN and Tripndroid I/O's
Powersuspend, LCD notify and state notifier
Dynamic FSYNC
CPU, GPU and RAM overclock
Simple GPU algorithm and AdrenoIdler
Enhanced audio with Faux Sound and low latency drivers and high performance mode
KCAL
KEXEC Hardboot patch
DT2W/S2S/S2W
Make optimizations
Powered by UBER STOCK Toolchain 4
22/04/2017
LATEST SOURCES
CPU OC/UC
GPU OC/UC
CPU boost
KCAL
faux Sound
High perf headset mode
OC RAM and slimbus
Intellithermal
Simple GPU Algorithm and AdrenoIdler
State notifier and Powersuspend
Alucard and AutoSMP hotplugs
Stereo call recording
Custom I/O's
Stock GOVS
KEXEC Hardboot patch
wakelock blocks
Fsync on/off
Power efficient workqueue
29/4/2017
DT2W/S2S/S2W
Bugs:
None by now,if you encounter one please make a post in this thread with steps to reproduce and if possible a LOGCAT and DMESG.
Reserved
Reserved
thanks man trying !
ralp88 said:
thanks man trying !
Click to expand...
Click to collapse
Okay ! Awaiting for you feedback!
I thought @kwoktopus made the tutorial thread..? :silly::silly::silly:
kwoktopus said:
I thought @kwoktopus made the tutorial thread..? :silly::silly::silly:
Click to expand...
Click to collapse
LOL Sorry i will update
REALLY A BIG THANKS TO YOU BRO!
BryanByteZ said:
LOL Sorry i will update
REALLY A BIG THANKS TO YOU BRO!
Click to expand...
Click to collapse
You're welcome! Great to see people taking steps into development!
New kernel, woohoooo:good::good::victory::victory: thanks bro, i test on Dirty Unicorns
willizambrano01 said:
New kernel, woohoooo:good::good::victory::victory: thanks bro, i test on Dirty Unicorns
Click to expand...
Click to collapse
Nice! Awaiting for feedback!
BryanByteZ said:
Nice! Awaiting for feedback!
Click to expand...
Click to collapse
Great kernel! Smooth, fast and stable, autosmp hotplug please ... waiting of good experience battery
willizambrano01 said:
Great kernel! Smooth, fast and stable, autosmp hotplug please ... waiting of good experience battery
Click to expand...
Click to collapse
Thanks! Sure autosmp!
Just a headsup people based on commit of SLATE21&MOTOG i fixed the flicker issue of KK ROMs on Lollipop bootloaders.
I just need to repair WiFi (thanks to my script) and i will upload it soon.
So a bin thank you to @SLATE21&MOTOG.
Sorry double post. Slow net speed here.
lol great xD can you add dynamic fsync, zzmoove and Overclock/underclock.
Chofito said:
lol great xD can you add dynamic fsync, zzmoove and Overclock/underclock.
Click to expand...
Click to collapse
I will look it, currently i trying to fix wifi in cm11 version and kexec and some more govs on cm13 and possible add DT2W since my power button is not that good.
New build on! for cm13 just a minor script optimization.
For cm11
v0 - CM11
Stock CM11 kernel with lastest sources and patched to work WiFi,Bluetooth and NO [email protected]!
New kernel, lol :highfive:
Smooth and fast on Resurrection Remix
+1
Nice work, buddy.
willizambrano01 said:
Great kernel! Smooth, fast and stable, autosmp hotplug please ... waiting of good experience battery
Click to expand...
Click to collapse
Ohhhhh yeaaahhhh,.. simple use with wifi and without mobile data, automatic brightness, very good :good::good::good:

[7.0+] Matsuura Kernel for Xperia E3 [Based on LineageOS ROM]

Matsuura Kernel | Stability for Performance
For Xperia E3
Based on Lineage OS 14.1 source​
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Matsuura Kernel is based on Lineage OS source (renaissance), and included many improvement, features and optimization on processor for Xperia E3 that use Lineage OS Nougat as base ROM.
Matsuura Kernel offer kernel stability, smoothness process on cpu and This kernel is include several feature to increase performance, This kernel need kernel configuration app to control this kernel, so try to find kernel configuration app after flash this kernel.
Recommended Kernel Configuration App:
- Kernel Adiutor [Recommended, simple and easy to use]
- Device Control
This kernel feature is :
- Linux Kernel v3.4.113
- Added CPU overclock up to 1,6Ghz
- Added CPU underclock to 96Mhz (300Mhz as minimum idle freq)
- Added GPU overclock and underclock to 100Mhz as lower and 550Mhz as higher frequency
- Compatibility with AOSP,CM And LineageOS based ROM [Android 7.0+]
- Added custom CPU Governor : Alucard,Intelliactive,IntelliMM,PegasusQ,Smartmax,Lionheart, & Intellidemand
- Added custom I/O Sched Governor : zen,sio,sioplus,tripndroid,fifo,fiops,maple,bfq and vr
- Added custom TCP Modules : Advanced,Bic,Westwood,Hybla,Vegas,Veno,Yeah,Ascarex and more
- Implement Power Efficient Workqueues
- Added Interface of Gentle Fair Sleepers,CPU Boost,Android Logger,Wakelock Toggles and Arch Power (Option Disable by Default)
- Added Frandom Support
- Added Dynamic Fsync 1.5
- Entropy Tweaks
- NEON VFPV4 Optimized (hard)
- Added Intelli Plug v4.0 (Disabled on new update)
- Added Intelli Thermal v1.0
- Added Headset High Perfomance Mode (HPF)
- Added Simple GPU Algorithm
- Added Faux Sound Control v3.6
- Added Powersuspend Driver v1.6
- Added MSM Hotplug
- Added State Notifier Driver
- Compiled using GCC 5.4.1 Hyper Toolchains
- Added Compatibility with AnyKernel v1 Script
- Added EXFAT File System Support (Need Test)
- Updated F2FS to latest revision branch (f2fs-stable.git) [F2FS Branch]
How to install :
>> For v4 and v4.1
1. Download Matsuura Kernel and install it from recovery mode, use TWRP recovery then reboot to system
2. Download Root Explorer or whatever it is
3. Delete /system/etc/init.d/99matsura then reboot
4. install kernel adiutor from Playstore Link for kernel configuration (i don't have myself app to control kernel)
5. Final step, let's configure kernel like what you want it :victory: and enjoy my first custom kernel
>> For v3
1. Download Matsuura Kernel and install it from recovery mode, use TWRP recovery then reboot to system
2. install kernel adiutor from Playstore Link for kernel configuration (i don't have myself app to control kernel)
3. Final step, let's configure kernel like what you want it :victory: and enjoy my first custom kernel
For download, look at download tab on top of this thread
Thanks to :
@rmnhg
@infus38
@jpzex
@aryawpratama
Have Try :highfive: !
XDA:DevDB Information
Matsuura Kernel for Xperia E3, Kernel for the Sony Xperia E3
Contributors
Nicklas Van Dam, rmnhg, aryawpratama
Source Code: https://github.com/Nicklas373/renaissance
Kernel Special Features: Optimized for flamingo, Build for peformance, and Overclock
Version Information
Status: Stable
Current Stable Version: 4.1
Stable Release Date: 2018-04-17
Created 2018-02-19
Last Updated 2018-05-06
Changelog
Changelog :
- 4.1 (20180417):
- Removed CPU Freq Upstream
- Removed CPU Gov Chill & Relaxed
- Removed Interactive optimization
- Revert Change of dynamic fsync to 1.5 cause stability issue
- Improved CPU algorithm after clean up
- Improved Kernel Performance & Stability Runtime
- Reduced Some Wakelock Code on kernel
- Change some init.d optimizations
- Fourth Build (20180415) :
- Misc change with WLAN
- Update powersuspend to v1.6
- Updated new power manager API
- Optimized kernel sched balance feature
- Added new filesystem dynamic read-ahead (thanks to @infus38)
- Added interface toggle of printk logger
- Added MSM Hotplug and disable intelli plug
- Misc kernel optimizations
- Fix some memory leak issue on selinux and other
- Added new wakelock toggle (bluedroid and bluesleep)
- Updated kernel power efficient workqueue algorithm
- Added initial init.d support
- v3.1 (20180319):
- CPU misc optimization
- Added dynamic management of dirty page writeback
- Disable some tracing and debugging
- Misc optimization for intelli thermal
- Third Build (20180305)[F2FS Version][Last Support that use F2FS]:
- Re-port F2FS to current revision branch from f2fs-stable.git
- Re-configure F2FS configs
- Update FAUX Sound Control to v3.6
- Added Maple I/O Sched with state notifier
- Added TCP Ascarex congestions
- Removed stock mpdecision on kernel to fix hotplug problem
- Configure some CPU Governor freq & Update Alucard to v1.1
- Removed SDCARDFS Drivers (Not work)
- Added Tripndroid I/O Sched
- Setting up Maple as default I/O Sched, TCP Westwood as default and Intelli Plug enable as default
- Second Build (20180225):
- Misc Optimizations on CPU Table
- Fixed CPU OC and OC up to 1.6Ghz
- Fixed CPU UC and UC to 96Mhz with 300Mhz as minimum idle frequency
- Fixed GPU OC and UC to 550Mhz as higher and 100Mhz as lower frequency
- Re-build new dt.img (to refresh new CPU/GPU Freq)
- Added sioplus I/O Sched
- Added Lionheart CPU Governor
- Removed MSM Limiter & Maple I/O Sched
- Added SDCARDFS Drivers (Need Test)
- Removed F2FS Support (NOTE: Other build still support, but won't for long term support)
- First Build [BETA](20180219):
- INITIAL RELEASE
Kernel Adiutor Configuration
CPU Manager :
CPU Max Frequency : 1190Mhz (For Normal Usage), 1.406Mhz (For Multitasking Usage) & 1.596Mhz (For Hard/Gaming Usage)
CPU Min Frequency : 384Mhz / 787Mhz (For Normal / Idle) & 96Mhz / 192Mhz (For Battery Saving)
CPU Governor: Alucard or Interactive (For Normal Usage), Alucard or IntelliMM (For Multitasking Usage) & Lionheart or Intelliactive (For Hard/Gaming Usage)
CPU Boost: 20ms
Sync Threshold: 787Mhz
Input Interval: 40ms
Input Boost Frequency Core 1 - 4: 998Mhz
(Beside that leave it as stock)
Thermal Manager:
Intelli Thermal : Enable
Core Control : Enable
Frequency Throttle Temperature : 60c
CPU Throttle Temperature : 70c
Thermal Limit Low = 2
Thermal Limit High = 11
(Beside that leave it as stock)
GPU Manager
GPU Max Freq : 450Mhz (For daily usage), 550Mhz (For hard gaming)
GPU Governor : msm-adreno-tz
Simple GPU Algorithm : enable
I/O Scheduler =
Internal Storage: maple (default), bfq (For multitasking)
External Storage: maple (default), bfq (For multitasking)
NOTE : It should set as maple for internal, but i don't know about external, but you can use another if you want to get some experience with it
Misc =
Software CRC Check = Disable
Dynamic Fsync = Disable
Arch Power = Disable (Not really recommended)
Gentle Fair Sleepers = Disable
Power Suspend Mode = Hybrid
TCP Congestions = Depends on your need
Wakelock = Disable all toggles to disable wakelock that active on idle
Option already update during new kernel feature is include
For explanation (cpu hotplug, and i/o sched) check on this thread
CPU Governor : Link- 1 Link-2
I/O Sched : Link
CPU Hotplug :Link - 1 Link - 2
Special Thanks to @gsstudios for guide :laugh:
FAQ Thread
FAQ Thread:
1. Can i install this kernel on type D22XX?
: Yes, you can install this kernel on all variant of flamingo (Xperia E3)
2. Can i install this on other version of lineage or other ROM from the other ROM?
: Yes, you can directly to install it without any worry because this ROM already integrated with anykernel
3. I've some problem with my device, like ....?
: You can report it with give proper dmesg or kmsg log here, go to kernel adiutor and go to settings -> search about dmesg or kmsg section and upload that log here.
4. Why stock mpdecision is gone after flash this kernel?
: Yes, i'm disable it but not remove it. To avoid overlap issue when using mpdecision but intelli plug already available as change for mpdecision and enable by default
5. Can i restore mpdecision?
: yes, try to rename it with root explorer or other root manager and go to /system/vendor/bin and rename mpdecision.bak to mpdecision and change permission to rwx-xr-xr (0755) and reboot it. It should restore your mpdecision
6. About F2FS Support
: Last build of kernel that still support for F2FS is on v3, build is higher than that is not supported for F2FS again during some unsolved issue for adoptable storage user.
So Nice , I'm so sad to only dev for e3 and not own one
thanks to you for push that on xda , people will love it
Great Kernel. :victory:
From another great dev
Thank You
Will flash it Asap.
Ali Haide 001 said:
Great Kernel. :victory:
From another great dev
Thank You
Will flash it Asap.
Click to expand...
Click to collapse
Thanks , Have Try !
New update is release !
New update is release for matsuura kernel with major change on kernel :highfive:
in this update, OC/UC is really work because i already update dt.img and improve anykernel script.
Kernel stability already increase with following adding much feature on it and adding kernel wakelock toggles
I'm still include much change and improvement on kernel, for further change look on changelog page.
Download links in download tabs, have try
New kernel adiutor configurations is already updated, please see it to get better performance when using this kernel
NOTE: Mpdecision is removed for this build, so when you want to flash another kernel beside this try to do this before
try to rename it with root explorer or other root manager and go to /system/vendor/bin and rename mpdecision.bak to mpdecision and change permission to rwx-xr-xr (0755) and reboot it. It should restore your mpdecision
Thank you for update
Developer is great and supporting:angel:
I have been using this kernel from some time and i can say that it's awesome
I recommend everyone to try this Kernel:highfive:
can't download because it's under maintenance https://forum.xda-developers.com/devdb/project/dl/?id=28779
aryawpratama said:
can't download because it's under maintenance https://forum.xda-developers.com/devdb/project/dl/?id=28779
Click to expand...
Click to collapse
Link download is already fixed, try to access on pc if you've problem with it. When server is maintenance just wait for a few hours and it will available again.
Or maybe i'll make a mirror on androidfilehost later
Sent from my Sony Xperia M using XDA Labs
Nicklas Van Dam said:
Link download is already fixed, try to access on pc if you've problem with it. When server is maintenance just wait for a few hours and it will available again.
Or maybe i'll make a mirror on androidfilehost later
Sent from my Sony Xperia M using XDA Labs
Click to expand...
Click to collapse
Thank you!
aryawpratama said:
Thank you!
Click to expand...
Click to collapse
you're welcome .
If have any problem with it just ask it or contact me at PM
New update is release !
New update is release or matsuura kernel, at this release i add much feature and some bunch of fix inside the kernel
Kernel stability already increase with following adding much feature on it and adding additional kernel wakelock toggles
I'm still include much change and improvement on kernel, for further change look on changelog page.
kernel already used init.d script, so kernel will get auto configured after boot is completed
Download links in download tabs, have try
New kernel adiutor configurations is already updated, please see it to get better performance when using this kernel
NOTE: MSM Hoptlug is used to change intelli plug, let's see if this can manage better than intelli plug
and F2FS Build isn't supported again since fourth build, if anyone use adoptable with f2fs then stick with v3 for keep your device decrypted normally or PM me to request for f2fs build.
New update is release !
New build is release to fix some problem with copyright issue with the owner of code..
What's removed :
- Upstream CPU Governor
- Chill & Relaxed Governor
- Interactive Patch Update
- Downgrade Dynamic Fsync to 1.5 from 2.0
But, i already fix some issue and increase kernel stability and performance after that remove. So kernel runtime and performance isn't drop down cause that remove.
Have try
New build is on download tab and i already update changelog
The mobile struck on the lineage booting page after installing this kernel.
I am using LOS v3 with mastuura kernel v4 . everything is fine . one day i drained my full battery and kept it for charging the phone is not charging up and not turning on .. can anyone help ?
arulsherlin said:
I am using LOS v3 with mastuura kernel v4 . everything is fine . one day i drained my full battery and kept it for charging the phone is not charging up and not turning on .. can anyone help ?
Click to expand...
Click to collapse
Same with me
Mother board is fused
Go to Sony repair ward . they'll fix for 2000₹
@Nicklas Van Dam Tank you
How to download this File Kernel? I can't look the downloads link

[EAS][ATOS][KERNEL][SAKURA]Atos-Kernel [3.18] - EOL

Code:
#include <std_disclaimer.h>
/*
* Your warranty is now probably void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
I am new to kernel development so please don't be harsh in reviews.
This kernel derived from ThunderStorm. And add more Customization
Compile using DragonTC Clang 10 (Based on LLVM 10.0.0svn)
Features:
- Energy Aware Scheduling (EAS) *What is EAS? See here
- Kernel Upstream To 3.18.140
- Selinux Permissive
- CPU OC 2208 MHz
- GPU OC 725 MHz
- Vibration intensity control
- Fsync: on/off support
- Improved interactive governor
- Improved CPU boost
- Improved RCU boost
- Improved conservative governor
- USB Fast Charge (when use USB from laptop)
- Many memory improvements
- Vibration intensity control
- KCAL color control
- DTS Sound
- Audio codec quality improved
- I/O optimization
- I/O schedulers:
noop
deadline
cfq (default)
zen
maple
- EAS CPU Governors :
- Schedutil
- CPU Governors:
alucard
alessa
blu_active
zzmoove
darkness
zzmove
interactive (Default)
ondemand
userspace
powersave
lionheart
performance
- GPU Governor:
spdm_bw_hyp
bw_hwmon
venus-ddr-gov
msm-vidc-vmen
msm-vidc-ddr
bw_vbif
gpubw_mon
msm-adreno-tz (default)
cpufreq
userspace
powersave
performance
simple_ondemand
- Power Suspend Mode
Autosleep
Userspace
LCD Panel
Hybrid
- And more features ​
Installation:
- Reboot Custom Recovery (TWRP / OrangeFox)
- Backup boot, system, vendor
- Install Kernel
- Reboot system
Bugs :
Looking for another bug
Download:
EAS Version:
EAS-Atos-Kernel-Sakura-v10.1
Standard Version:
Atos-Kernel-Sakura-v10
Atos-Kernel-Sakura-v10-Overclock
Tested On Miui EU Beta and Stock Mi A2 Lite (Port for Sakura)
*NOTES: Use SmartPack Kernel Manager for more experience with this kernel
*Attention : Only install this kernel on roms with prebuilt 3.18 kernel !
Like my work? U can support me here: Paypal
Thanks TO :
Thundestorm Kernel for base
AnyKernel2 for Flashable ZIP
Some my kernel testers
And thanks to anyone for telling me bug this kernel
And you
Leave thanks if you like this Kernel
Code:
Changelog
v10.1
Bring up EAS [B] [I]*What is EAS? [URL="https://developer.arm.com/tools-and-software/open-source-software/linux-kernel/energy-aware-scheduling"]See here[/URL][/I][/B]
New EAS CPU Governor : Schedutil
Remove some standard cpu governor, now only EAS Cpu Governor
v10
Change version kernel
Add Klapse 5
mdss_fb: add lcd backlight min limit
Remove useless CPU Governor
New compiler using DraginTC Clang 10 (Based on LLVM 10.0.0svn)
BACKPORT: clang cross build support
Makefile: Some changes for GCC
kbuild: clang: remove crufty HOSTCFLAGS
kbuild: clang: fix build failures with sparse check
kbuild: Add support to generate LLVM assembly files
kbuild: clang: add -no-integrated-as to KBUILD_[AC]FLAGS
And some improvement
v69.9e
Merge from CAF 'LA.UM.7.6.r1-05500-89xx.0'
Merge Staging Prima 'LA.UM.7.6.r1-05500-89xx.0'
Add Thermal Control
Add Voltage Control
And more Improvement
v69.9a
Now can use on custom ROM with kernel 3.18
v69.9
Fixed brightness issues for MIUI from version v69.8b
Add more CPU governor
Add more IO Schedulers
- v69.8b
Some Improvement and More Stability
Added DTS Eagle
Test compile for custom Rom with kernel 3.18
- v69.8-Beta
CPU OC 2208 MHz
GPU OC 725 MHz
Add USB Fast Charge (when using USB from a laptop)
Add CPU Governor (Alessa)
- v69.7-Beta
Fix missing driver
- v69.6
GPU OC 750MHz
Some improvement
- v69.5
Fixed no sound during a call
Added more CPU and GPU Governor
- v69.4
SELinux Permissive
Fixed Flashlight QS toggle
- v69.3
Added More CPU Governor
Added More GPU Governor
Fixed Wifi
And etc I forget :)
- v69.2
Booted, but a lot of bugs
- v69.1
Initial Release
Not booted
XDA:DevDB Information
SAKURA Atos Kernel, Kernel for the Xiaomi Redmi 6 Pro
Contributors
Okta. Pra A
Source Code: https://github.com/okta-10/kernel_xiaomi_msm8953-sakura-atos
Kernel Special Features: Energy Aware Scheduling (EAS), Overclock CPU & GPU, DTS Eagle
Version Information
Status: Stable
Current Stable Version: v10 - (3.18.140)
Stable Release Date: 2019-07-02
Current Beta Version: v10.1 - (3.18.140)
Beta Release Date: 2019-09-15
Created 2019-06-15
Last Updated 2020-08-12
Reserved
Nice to see a kernel dev in here!And a new MIUI kernel!Congrats and keep up the good work!
On a side note,do provide a detailed changelog so that others may find your kernel more
interesting and know exactly what features are there in the kernel
Nice to see a new kernel.
Is it for pie or for oreo.
Update
Atos Kernel v69.4
Changelog:
- Selinux Permissive
- Fix flashlight QS Toggle
Download: Stable v69.4
darkhzy_kh said:
Nice to see a kernel dev in here!And a new MIUI kernel!Congrats and keep up the good work!
On a side note,do provide a detailed changelog so that others may find your kernel more
interesting and know exactly what features are there in the kernel
Click to expand...
Click to collapse
Hi, Thank you for his advice , i am very happy, but now i have added some Changelog , thank you before
deepak kumar android said:
Nice to see a new kernel.
Is it for pie or for oreo.
Click to expand...
Click to collapse
Thank you, work fine in MIUI Pie, so please just try in miui oreo the own risk
:good: Thanks
ananxd said:
:good: Thanks
Click to expand...
Click to collapse
You're welcome, bro
Update
Atos Kernel v69.5
- Fixed no sound during call
- Added more Cpu and Gpu Governor
Download: Stable MIUI Atos Kernel v69.5
Will try tomorrow.
ananxd said:
Will try tomorrow.
Click to expand...
Click to collapse
Yes, try it
I don't see any commits
https://github.com/OktapraAmtono/kernel_xiaomi_msm8953-sakura-atos/commits/atos-miui
ndrancs said:
I don't see any commits
https://github.com/OktapraAmtono/kernel_xiaomi_msm8953-sakura-atos/commits/atos-miui
Click to expand...
Click to collapse
Coz he merged all of them into one
ndrancs said:
I don't see any commits
https://github.com/OktapraAmtono/kernel_xiaomi_msm8953-sakura-atos/commits/atos-miui
Click to expand...
Click to collapse
darkhzy_kh said:
Coz he merged all of them into one
Click to expand...
Click to collapse
Yeah,, , , actually because i don't know use github, just create repository... ??
I just compile from my local computer ?
So sorry ??
After installing on ????, the sensor stopped working. Can not unlock. Put the kernel of another developer - it works well.
z20010 said:
After installing on ????, the sensor stopped working. Can not unlock. Put the kernel of another developer - it works well.
Click to expand...
Click to collapse
Whats ur use miui version?
On latest miui eu beta working fine
z20010 said:
After installing on ????, the sensor stopped working. Can not unlock. Put the kernel of another developer - it works well.
Click to expand...
Click to collapse
same as me, last miui.eu beta
Okta. Pra A said:
Whats ur use miui version?
On latest miui eu beta working fine
Click to expand...
Click to collapse
??????? 10 9.6.13
z20010 said:
??????? 10 9.6.13
Click to expand...
Click to collapse
Try instal without module, ektrack kernel then delete all file on system/lib/modules...
before install kernel u need restore system

Categories

Resources