temasek's UNOFFICIAL CM11 BUILD
NOTE
This can be used on ANY bootloader.
This is an UNOFFICIAL build of CM11 ( CyanogenMod 11 ) for hltexx (N9005) and by NO means this is my ROM. I am just compiling from CM Source and 100% credits goes to TeamDouche, the device maintainers of NOTE 3 -> Shareef Ali,Tony Layher, Drew Suarez and all other coders who contributed to CyanogenMod.
This is similar to a nightly from CM but has some extra goodies baked in. If you can't handle some things possible being broken, please don't use this and then complain to me for building it.
DISCLAIMER
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Remember to VOTE this thread if you like it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
IMPORTANT
Click to expand...
Click to collapse
Do NOT expect daily builds. I'll build when I'm free.
Do NOT ask for support in this thread.
Do NOT use this unofficial build and ask for support at the official threads.
Do NOT be rude.
Respect all users
If u see a NOOB question and u don't feel like replying, DON'T, just ignore that post. If u do reply, good for u.....and be nice in your reply.
HOW TO INSTALL
Click to expand...
Click to collapse
Latest official CWM recommended but not required.
Read this first -> CLICK ME
1st Time Installing
Download the zip
Download Gapps
WIPE DATA/FACTORY RESET
WIPE SYSTEM
Install the update zip from recovery
Install gapps
Reboot
Already installed CM11.0
Download the zip
Install the update zip from recovery
Reboot
FAQ / KNOWN ISSUES
Click to expand...
Click to collapse
WIP
MISC
Click to expand...
Click to collapse
BaNkS GApps
Temasek kernel settings
DOWNLOAD SITES:
http://temasek.hopto.org
http://d-h.st/users/temasek
MIRROR LINK:
Mega - By @elroy944
CREDITS
Shareef Ali,Tony Layher, Drew Suarez (cm maintainers of note 3)
SlimROM
OmniROM
AOKP
CarbonROM
ChameleonOS
ParanoidAndroid
DerTeufel
Faux123
Wootever
franciscofranco
PartimusPrime (bootanimation for temasek builds)
Cristiano Matos
SleepinDevil (his assistance to troubleshoot/fix bugs)
Vadonka (sponsor of temasek.hopto.org server)
powwow88 (creator of my custom cm10 bootanimation)
paour (contributor to github sources)
All other coders for making CM possible!
A donation to our note 3 cm maintainers to show your appreciation. Thanks!
CHANGELOG
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=29339092&postcount=2
Reserved again
Another reserved
Nice! I'm glad you opened this thread. Congrats on the great rom I love it.
Just opened this thread and changelog,etc is WIP.
Note about myself
1. I hate maintaining threads so if its messy, Do NOT complaint!
Glad you made your own thread. It's nice to have single place to get our cm11 builds
Im third one...kinda late but its better late than never...Temasek's Rules!!!
Nice :victory:
excellent! your builds are running great on the hltecan SM-N900W8 Canadian note 3 m8 :good::good: glad to see this thread also
Don't ask for changelogs yet. Also point builds will never have changelogs.
V27 expected next week.
Point builds anytime.
Another note to myself. I hate writing changelogs
Now I can stalk you.been stalking u from the samsung s3 from the early builds
Yes i loved your builds for the s3! Fantastic - always helpful you are too. Excellent!
temasek said:
Don't ask for changelogs yet. Also point builds will never have changelogs.
V27 expected next week.
Point builds anytime.
Another note to myself. I hate writing changelogs
Click to expand...
Click to collapse
What launcher do you recommend for the current build? Just a follow up on my question in the other thread.. As you stated you don't use the stock launcher... Thanks in advance!
Sent from my SM-N9005 using XDA Premium 4 mobile app
thanks for the build mate
to the fellow above ^^^ use nova launcher super quick on kitkat
Pls note you can mount UMS (USB Mass Storage) for your external sdcard natively without using any external apps.
Also I just merged the sources for saving to external sdcard in camera by rori~
turilo said:
excellent! your builds are running great on the hltecan SM-N900W8 Canadian note 3 m8 :good::good: glad to see this thread also
Click to expand...
Click to collapse
Im also a SM-N900W8 user, have you experienced any issues? or glitchez? everything work for you so far? How is the camera? i get FC on every rom i flashed on this phone...
THX in advanced...
LNKNPRKFN said:
Im also a SM-N900W8 user, have you experienced any issues? or glitchez? everything work for you so far? How is the camera? i get FC on every rom i flashed on this phone...
THX in advanced...
Click to expand...
Click to collapse
Everything runs perfect for me, no glitches, fc nada. There must be something you're probably not doing correctly perhaps? I always full wipe before in flash any rom
Sent from my SM-N900W8 using Tapatalk
turilo said:
Everything runs perfect for me, no glitches, fc nada. There must be something you're probably not doing correctly perhaps? I always full wipe before in flash any rom
Sent from my SM-N900W8 using Tapatalk
Click to expand...
Click to collapse
I always do a full wipe before flashing...Golden rule #2. Being #1 is NAND... ok looks like ima giver her a go!!!
*** NOTICE ***
Pls note I've remove assert check since V26.2 and thus users able to flash my builds in other note 3 devices. Any idiot who flash my hltexx build on NON-note3 devices, I won't feel sorry for them.
Also pls note at this moment I am not sure any issues whatsoever in flashing my hltexx build onto other note 3 sister devices. If there are, I will feel sorry but pls do NOT blame me.
My build naming convention is basically towards my github sources across all my supported devices. Note 3 started with V26.1 was because my latest build release across my devices is V26.
I am supporting the following devices in ROM/Kernel thus my time is not exactly in my favour. Pls do understand if I don't reply your querries.
hltexx - ROM
i9300 - ROM + Kernel
tilapia - ROM
grouper - ROM
Regards
Temasek
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is OmniROM?
OmniROM Gerrit Review
Disclaimer
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Important Information
Root access has not been incorporated into the ROM source yet, so you will need to flash SuperSU in recovery SuperSU
For all you Do-It-Yourself-ers, simply follow this guide to initialize a build environment and get your own builds started - OmniROM - Setting Up A Compile Environment
Got a bug report? Want to request a feature?
jira.omnirom.org
Click to expand...
Click to collapse
Installation Instructions
FROM ANOTHER ROMS
Factory Reset/Wipe Data
Format System
Format Dalvik Cache
Install ROM
Install Gapps
Reboot
Profit
UPDATE FROM OMNIROM TO NEWER RELEASE
Settings -> System Updates -> Check for update
You will NOT need to wipe anything with the delta updates :good:
Click to expand...
Click to collapse
Downloads
ROM:
jflte
http://dl.omnirom.org/jflte/
Gapps:
PA 0-Day Gapps
Click to expand...
Click to collapse
Contributors/Credit
The OmniROM Team - Great devs that have taught me just about everything I know about this stuff in such a short amount of time
CyanogenMod
ParanoidAndroid for the GApps package
@jumoog for working with me on the jf family of devices (MOAR Galaxay S4's to be supported soon!)
@SferaDev for ALL the work on adding Samsung RIL support
@CNexus for his awesome boot.img tools and helping me out
@Evisceration for his insane kernel pwnage
Testers
@CPA Poke
@LamboDroid19
@RockMan195
@crzygrmn
@uberstupd
@Pump Ac7i0n
And anyone else I apologize I forgot on this list but thank you
Source
OmniROM Source
XDA:DevDB Information
OmniROM, a ROM for the AT&T Samsung Galaxy S 4
Contributors
jakew02
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Rooted, Custom Recovery
Based On: AOSP
Version Information
Status: Alpha
Current Stable Version: -
Current Beta Version: -
Created 2013-10-28
Last Updated 2014-04-08
Changelog
Changelog
OmniLog - jflteatt
OmniLog - jfltecan
Q&A
Frequently Asked Questions
Q: Why don't I have root access after installing OmniROM?
A: OmniROM does not have an official, prebuilt root method yet, so you'll just need to flash SuperSU in recovery and you'll have 100% working root access. SuperSU can be found here: SuperSU
Q: Where is <insert feature here>, like CM/AOKP/PA/etc have??
A: Omni is still very early in development, but moving at an incredibly fast rate. New feature, bug fixes, and device support are added just about daily. Check it out here: OmniROM Gerrit Review for the latest and greatest
Q: How do I start/stop screen recording?
A: Volume UP + Power will start screen recording. Simply drag the notification bar down and click the button to stop.
Q: HALP NFC doesn't work!!
A: We know.
Nice to see a new release, thanks for sharing with us
Awesome
Interesting ...
Nice work Jake!
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
anyone try it out yet?? i've been running it all day. everything's working great! :highfive:
I just wiped everything and installed it. I haven't found any issues yet, but I haven't even made any phone calls yet.
Thanks a ton for pulling this all together and sharing with the rest of us. I've been itching to try Omni.
EDIT: I made a phone call now! I haven't run across anything that doesn't work. Calls, texts, camera all work fine.
jakew02 said:
anyone try it out yet?? i've been running it all day. everything's working great! :highfive:
Click to expand...
Click to collapse
I did load it up seems to run just fine, missing alot of features I like to use such as hardware keys (custom settings) which is the main thing and the general interface options so I'll wait for some future tweaks.
I'd love to try this but again what are the tweaks in this rom? What do they differ from others and what are the same?
Sent from my SGH-I337 using XDA Premium 4 mobile app
PapaMag said:
I did load it up seems to run just fine, missing alot of features I like to use such as hardware keys (custom settings) which is the main thing and the general interface options so I'll wait for some future tweaks.
Click to expand...
Click to collapse
Custom hardware keys options are comnig very soon
lauterm said:
I just wiped everything and installed it. I haven't found any issues yet, but I haven't even made any phone calls yet.
Thanks a ton for pulling this all together and sharing with the rest of us. I've been itching to try Omni.
EDIT: I made a phone call now! I haven't run across anything that doesn't work. Calls, texts, camera all work fine.
Click to expand...
Click to collapse
toxicpaulution said:
I'd love to try this but again what are the tweaks in this rom? What do they differ from others and what are the same?
Sent from my SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Right now there are less than CyanogenMod, it is very close to stock AOSP at this point, but Gerrit review is overloaded with tons and tons of new features, theres at least one or so new features being merged in daily. Read the articles I posted in the OP for more information on that from the OmniROM team themselves, their philosophy, and future plans
It might be missing some extras, but this is a very solid ROM.
I've only found two minor issues that are probably upstream issues. The capacitive buttons never light up. I'm pretty sure that's a known Omni-wide issue. Secondly, I got root to work, but OpenVPN Installer still says it can't remount /system as rw. I even tried remounting it rw first in root explorer, but it just won't install the OpenVPN binary. I'm guessing that's related to root not being built in.
Battery life seems good given how much I've had the screen on (50% battery with over 2.5 hours of screen on).
Overall, great job, Jake!
Sent from my SGH-I337 using xda app-developers app
Will there be a jfltecan build down the road?
SGH-I337M jfltecan
Gordietm said:
Will there be a jfltecan build down the road?
SGH-I337M jfltecan
Click to expand...
Click to collapse
definitely. i didn't want to push out builds for a device that i couldn't test on.
If someone wants to test for me, I'll definitely do it. :highfive:
Gordietm said:
Will there be a jfltecan build down the road?
SGH-I337M jfltecan
Click to expand...
Click to collapse
I would gladly test it.
SGH-I337M jfltecan
Gordietm said:
I would gladly test it.
SGH-I337M jfltecan
Click to expand...
Click to collapse
I'll send you a PM once i get it built. working on having it compile TWRP over CWM right now , after class i'll start working on jfltecan :good:
Jakew02, I'm going to try to compile a build using your repos. Hopefully I can start trying to contribute a bit. I'm a total noob though.
Sent from my SGH-I337 using Tapatalk
jakew02 said:
I'll send you a PM once i get it built. working on having it compile TWRP over CWM right now , after class i'll start working on jfltecan :good:
Click to expand...
Click to collapse
Huh? Recovery is NOT built into the kernel for this device. Its in a different partition of its own. There is no compiling TWRP over CMW for this device. Recovery needs to be compiled separately if you're trying to compile your own. Just look in the device repos.
jakew02 said:
I'll send you a PM once i get it built. working on having it compile TWRP over CWM right now , after class i'll start working on jfltecan :good:
Click to expand...
Click to collapse
I'm on Canadian i337m and I would test it too.
Right now I'm just using t mobile or ge roms. To chicken to flash any thing att only.
Sent from my SGH-M919 using xda app-developers app
task650 said:
Huh? Recovery is NOT built into the kernel for this device. Its in a different partition of its own. There is no compiling TWRP over CMW for this device. Recovery needs to be compiled separately if you're trying to compile your own. Just look in the device repos.
Click to expand...
Click to collapse
Well, add TWRP configuration to the device tree then and confirm it still builds
Sent from my SGH-I337 using Tapatalk
UnORoms Project
Presenting you CyanogenMod - The Flemmard Way
UNOFFICIAL VERSION
About CyanogenMod
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod Website
About CyanogenMod
CyanogenMod Source
Credits
CyanogenMod - For their source
@Flemmard : Thanks for awesome device trees and kernel. For fixing Camera using 3.4 drivers
@u-ra : Helping me fix camera
@shantur (me) : Fixing bits in Camera
@bilal_liberty
@Sultanxda
@ivanich
@SebastianFM
@johnnyslt
@albinoman887
If I have forgotten anyone, I apologise please pm me and i will correct my mistake
Features
3.4 Kernel based on HTC MSM8960 - @Flemmard - You are the man
3.4 Camera Drivers and libs
Continuous Autofocs in Photo and Video modes.
HDMI working with specific steps http://forum.xda-developers.com/showpost.php?p=51684382&postcount=176
Awesome sound
In kernel mp-decision
Stock Sensation XE CPU frequency 1.5GHz
Fast Charge enabled
No known freezes or reboots.
... will add more to list as things go on.
DISCLAIMER
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards or you
* getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this ROM before flashing it!
* YOU are choosing to make these modifications.
I am not part of CyanogenMod, I just compiled this rom for Sensation as part of UnoRoms Project. In no way I take the credit for Source
Screenshots
.... Coming Soon ....
Instructions
1. Download and install latest TWRP Recovery from here
2. Download Latest Release from link below
2. Download Latest Mini Modular GApps from here
3. Boot into recovery
4. Wipe data, cache if coming from other rom
5. Flash Rom
6. Flash Gapps
7. Reboot
8. Feel good
9. Hit Thanks
Downloads
ROM
GAPPS
Source
Donations
If you would like to donate for this Rom please donate to @Flemmard. This is all his brain child.
-= Request =-
The current nightlies server is non other than my laptop which is working day (for development) and night (for nightlies). It is getting low on space day by day with every new rom that I am trying. Currently nightlies are built in an external drive connected with USB3.
If you really think this project is a good effort, please consider funding towards a good build server that I could use for nightlies and towards the cost for maintaining the download servers. I do not want to put ads for supporting this project if you guys will chip in a bit.
Let me know if you have any other suggestions for supporting this project.
Reserved 1
Reserved 2
Yes! Good to see an alternate build with flemmards kernel.
Out of curiosity is there anything majority different/better with this build than team-sennyc2's?
Looks like some problems with UnoRoms download server. If things dont work out soon you guys will need to wait
sjknight413 said:
Yes! Good to see an alternate build with flemmards kernel.
Out of curiosity is there anything majority different/better with this build than team-sennyc2's?
Click to expand...
Click to collapse
In my opinion this kernel and rom are more stable. Kernel based on cm 8960 so it fully compatible with caf.
There is a typo in thread name, should be 4.4.2
Sent from my Nexus 4 using XDA Premium 4 mobile app
ivanich said:
In my opinion this kernel and rom are more stable. Kernel based on cm 8960 so it fully compatible with caf.
There is a typo in thread name, should be 4.4.2
Sent from my Nexus 4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Awesome! So will our Sensation ever get official CM?
your download server is working now but the folder you've linked doesn't exist, real link is http://xda.shantur.com/pyramid/roms/cm-flemmard/ but there are no files in there for now.
The download server was not working when the build completed so the build didnt upload. Building again now hopefully it should be available in next 1.5 hours.
sjknight413 said:
Yes! Good to see an alternate build with flemmards kernel.
Out of curiosity is there anything majority different/better with this build than team-sennyc2's?
Click to expand...
Click to collapse
As ivanich said its fully compatible with caf. Team senny is using 3.0 camera driver and libs. This uses the original 3.4 drivers and libs
Sent from my iPhone using Tapatalk
shantur said:
As ivanich said its fully compatible with caf. Team senny is using 3.0 camera driver and libs. This uses the original 3.4 drivers and libs
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
So, this rom theoritically bug free?
Mark376 said:
So, this rom theoritically bug free?
Click to expand...
Click to collapse
Sound issue the same as in teamsenny rom.
first of all thanks to @Flemmard for his incredible work!! the rom seems really really smoth and everything it's ok except camera...till now i've tried using stock app but it makes the phone crashed and using focal but it shows nothing
cclaxx said:
first of all thanks to @Flemmard for his incredible work!! the rom seems really really smoth and everything it's ok except camera...till now i've tried using stock app but it makes the phone crashed and using focal but it shows nothing
Click to expand...
Click to collapse
Code:
adb shell
su
mount -o rw,remount /system
cp /system/lib/hw/camera.vendor.msm8660.so /system/lib/hw/camera.default.so
reboot
Anyway it FC's sometimes.
ivanich said:
Sound issue the same as in teamsenny rom.
Click to expand...
Click to collapse
Isnt that fix with acbd from mako? Or it isnt integrated in this rom?
Mark376 said:
Isnt that fix with acbd from mako? Or it isnt integrated in this rom?
Click to expand...
Click to collapse
acdb from mako broke volume control when incall, and this rom uses villeC2 libs so distortions are here as well.
A new build is fired, it should fix camera not working. It will take 1.5 hours to be ready.
Will be front facing camera working & recording? Still delay when recording? Thanks.
shantur said:
A new build is fired, it should fix camera not working. It will take 1.5 hours to be ready.
Click to expand...
Click to collapse
Hi shantur,
if it possible in the next build will you enable selinux? it seems it's permissive right now.
Mark376 said:
Hi shantur,
if it possible in the next build will you enable selinux? it seems it's permissive right now.
Click to expand...
Click to collapse
Its not priority now. First we need to have a fully working and stable build.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OmniROM is a free, community built, aftermarket firmware distribution of Android 4.4 (Kitkat), which is designed to increase performance, reliability and features over stock Android for your device. It's also about options, which is the beauty of Android.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
OmniROM is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts.
All the source code for OmniROM is available in the OmniROM Github repo.
Homepage:
=================
http://omnirom.org/
Wiki;
=================
http://docs.omnirom.org/Main_Page
Gerrit:
=================
https://gerrit.omnirom.org/
IRC:
=================
irc.freenode.net #omnirom
Installation Instructions:
=================
First time installing OmniROM to your Moto G, or coming from another ROM:
- Read known issues and FAQs
- Make sure you're running a proper working ClockworkMod-Recovery/Team Win Recovery Project - WITH SELINUX SUPPORT!
- Copy GApps and OmniROM ZIPs to your SDCard
- Boot into Recovery
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Flash OmniROM zip from SDCard
- Flash GApps zip from SDCard
- Reboot
- Don't restore system data using Titanium Backup!
Downloads
=================
Mega- V0.1
Mega V-0.2
Version0.3
0.4
0.5
0.6
0.7
V1
V1.1
V1.2
V1.3
1.4
1.5
1.6
1.7
-----------------------------------------------------------------------------------------------
Superuser
Device Sources
=================
https://github.com/CyanogenMod/android_kernel_motorola_msm8226
https://github.com/omnirom/
https://github.com/Herna1994?tab=repositories
XDA:DevDB Information
Omnirom For Moto G, ROM for the Moto G
Contributors
rr46000, herna
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Kitkat
Based On: Omni
Version Information
Status: Beta
Created 2014-05-19
Last Updated 2014-10-13
No Dual Sim Support As Of Now
though i will try my best to add it
Bugs
=================
You tell me
Reserved
Thanks
Thanks to
@herna-for helping with errors
@anerik-
@herna for the sources
@RenderBroken
@dhacker29
@Entropy512 @squadzone
Screenshots
Woooow! Thankssss
Thanks
Sent from my Moto G using XDA Premium 4 mobile app
Wow Good Work Bro !
Sent from my Moto G using XDA Free mobile app
rr46000 said:
....
Click to expand...
Click to collapse
really happy bro awesome work!! keep it going and in few days we can have omni too!! seriously promising!! feeling proud to have motivated you to build from sources
Wow i will be following this thread until the main bugs are resolved. I will certainly flash this ROM.
Thanks for giving us Omni.
Sent from my XT1032 using XDA Free mobile app
Was looking forward to a Omnirom for our Moto G! Thanks for the effort!
nice joob dude all hopes to be our omni stable and fast good luck:good:
@rr46000
Great Job! Very glad to know you were able to get through those build errors. It "should" be smooth sailing now since you get the hard part out of the way. Now you just need to build nightlies/weeklies or whenever you feel like! If you haven't already, I would setup CCACHE if you have the extra hard drive space. It will dramatically reduce the build times. If you need help feel free to ask.
Render
RenderBroken said:
@rr46000
Great Job! Very glad to know you were able to get through those build errors. It "should" be smooth sailing now since you get the hard part out of the way. Now you just need to build nightlies/weeklies or whenever you feel like! If you haven't already, I would setup CCACHE if you have the extra hard drive space. It will dramatically reduce the build times. If you need help feel free to ask.
Render
Click to expand...
Click to collapse
My ccache is already set to 50 gb,no wonder I get fast builds, m gonna do weeklies idk right now, anyway
Making new build with new device repos @herna thank you so so much it would have not been possible without you
Sent from my Moto G using Tapatalk
Omg yes! Can't wait for it to be fully working!
Sent from my Moto G using Tapatalk
rr46000 said:
No Dual Sim Support As Of Now
though i will try my best to add it
Bugs
=================
No Mobile Network!
Sound Not working
Click to expand...
Click to collapse
There´re only two known bugs with your first release? Wow, that is awsome!
Good luck on your further steps. Will have a look on this ROM for sure
Just curious, this is unofficial, isn't it?
I'm really glad Omni is reaching this great phone, thanks for your work and let us know if we can help in any way!
Enviado desde mi Moto G mediante Tapatalk
ohn42 said:
There´re only two known bugs with your first release? Wow, that is awsome!
Good luck on your further steps. Will have a look on this ROM for sure
Click to expand...
Click to collapse
Well, after those fundamental bugs are solved, many of us (including myself) will try it in our phones and probably find other ones. It's quite logical not to encounter small details until a signifcant quantity of users are trying the rom. Still, even when new bugs will arise after the rom is more functional and more people begin using it, that's not bad at all. On the contrary, it's healthy, that's the only path to perfect any rom and/or kernel (or so I think!).
new user
hey guys , i just have got moto g , its not connecting to pc , i mean usb mass storage , plz help
fermasia said:
Just curious, this is unofficial, isn't it?
I'm really glad Omni is reaching this great phone, thanks for your work and let us know if we can help in any way!
Enviado desde mi Moto G mediante Tapatalk
Click to expand...
Click to collapse
Yup,its unofficial ,idk further i will be the mainter or not,lets see how it goes
fermasia said:
Well, after those fundamental bugs are solved, many of us (including myself) will try it in our phones and probably find other ones. It's quite logical not to encounter small details until a signifcant quantity of users are trying the rom. Still, even when new bugs will arise after the rom is more functional and more people begin using it, that's not bad at all. On the contrary, it's healthy, that's the only path to perfect any rom and/or kernel (or so I think!).
Click to expand...
Click to collapse
brilliant answer!
Testing New Build
Network is now working :victory::victory:
Still no audio
But its great progress
will update thread after audio gets fixed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer:
Code:
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards, thermonuclear
* war, or you getting fired because the alarm app failed. Please do some
* research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
KreAch3R said:
Krexus was born out of a simple necessity. The latest releases of stock Android (namely lollipop and marshmallow) were pretty close to my idea of a perfect android ROM, yet missing some elements, which are meant to be included in stock Android, at least for me. Starting from a clean AOSP environment, only specific features and fixes are included, which are personally tested, with one goal in mind. To create a stock like android ROM, "as it should be".
This means, and I mean it, a ROM like how stock nexus image should be, for me.
This isn't going to get bloated. Most UI "features" are already there.
This isn't going to start picking commits relentlessly, I will test them personally and only add things that 1) work like they should 2) would fit in a stock ROM.
This isn't going to be updated very quickly. Only security and bug fixes will be pushed out ASAP.
This is going to follow Google's & AOSP guidelines as closely as I can.
And lastly, this is first and foremost a ROM about Nexus 5 (hammerhead). This is my personal device, this is where I test the ROM. angler, bullhead, flo, mako, shamu builds are provided AS-IS, and bugs/missing stuff/features especially for them will be put on the lowest priority and will depend on my free time. I will only guarantee the nexus 5 ROM and its abilities.
That said, welcome aboard!
Click to expand...
Click to collapse
Google+ Community
Krexus website
PushBullet Channel
DOWNLOAD LINKS:
AndroidFileHost
CHANGELOG
Important Message
When @KreAch3R showed me this rom, I really wanted it for grouper because of the close to stock implementation.
It runs very well on the aging tablet and is a good way of experiencing Marshmallow like it should be from Google.
I want to thank @KreAch3R for the help and support he gave me.
Useful tweaks for better performance:
journaling off (flash jubei_test_script_remove_journal.zip)
http://forum.xda-developers.com/showthread.php?t=2280496
or
http://forum.xda-developers.com/showpost.php?p=64429384&postcount=122
Trimmer (set auto trim every day)
https://play.google.com/store/apps/details?id=com.fifthelement.trimmer
or
http://forum.xda-developers.com/showpost.php?p=64429384&postcount=122
Parrotmod:
http://forum.xda-developers.com/nexus-7/orig-development/parrotmod-speed-2012-nexus-7-emmc-fix-t3300416
Background processes set to 4 in Settings --> Developer Options
Enjoy!!!
Another Important Message
KreAch3R said:
This will be the post where I am going to write any new updates for my ROM. First of all, welcome!
For XDA, this is a new ROM. But for Google+, it isn't. I been testing it and releasing some builds in this private community, so be sure to ask to join for the latest info! I created this thread to let more people try my ROM, now that I feel it is in an almost perfect condition.
As as I said, my idea is to create a better stock ROM, and this is my target goal.
Another of my target goals is to make the release of a new build almost automated. Right now, the compilation of the 6 devices build list is finishing, and is uploaded to basketbuild, with clever smart scripts. This also updates the changelog in my site, so I don't have to write a new post everytime a new build is released. Everything should work!
Speaking of releases, the ROM comes with an updater, so you don't even have to check the community or this thread for new links. But follow the pushbullet channel if you want!
I've been copy/pasting information for the past half hour, so this new thread is bound to have mistakes and inconsistencies. Let me know and I'll fix it!
Some other important points:
You have to flash SuperSU and GApps.
If you have a question, you should check out google+, in case it's there.
For the Devs: check my vendor folder, I have been developing some automation scripts which I think, you will like!
I am an one man team, sorry for any slow responses.
Yes, this ROM is released for 6 devices, not hammerhead only. You can grab the zips from Basketbuild. I haven't created XDA thread for them (yet) because I don't own them.
I hope you like the ROM!!!
Click to expand...
Click to collapse
Hello grouper users! @GtrCraft has done an amazing job with grouper, and I am glad he helped to port his ROM on it. I hope you enjoy it, for any problem let me or @GtrCraft know!
Update:
https://www.androidfilehost.com/?fid=24352994023707310
The January Nexus update has been added
Man, this rom really runs great. Nice to have a guy like George G. at the helm. As always @GtrCraft, thanks for your exceptional work on grouper and good luck on any other exams you may have.
Mike T
GtrCraft,
Which Grouper ROM do you use: This Krexus, your CM13, your Minimal OS for Nexus7, or your Pure Nexus Project?
Or something else?
Thanks for all of them!
Enable attribute inspection in developer option it will enhance performance a lot
Sent from my Nexus 7 using Tapatalk 2
Sent from my Nexus 7 using Tapatalk 2
ROM is working well so far! Love the small size, but with all the essential tweaks (hoping for a few more in the future..). Have set it up using your suggested performance tweaks, so will see how it goes over time.
Thanks for your great work!
Sent from my HTC One using Tapatalk
dvgb173 said:
GtrCraft,
Which Grouper ROM do you use: This Krexus, your CM13, your Minimal OS for Nexus7, or your Pure Nexus Project?
Or something else?
Thanks for all of them!
Click to expand...
Click to collapse
I personally use Pure Nexus
Update:
Up to date with the official builds.
Also updated vendor, so pls test
Download in OP
I couldn't get this to load on my grouper. Stuck on Google screen.
Coming from your CM13 ROM. Using TWRP 2.8.7.0
I tried wiping System - no go.
Any trick to this?
EDIT: Is this the issue where one needs to revert from CM to be able to flash non-CM roms? Seems I had this problem with other devices and earlier OSes.
dvgb173 said:
I couldn't get this to load on my grouper. Stuck on Google screen.
Coming from your CM13 ROM. Using TWRP 2.8.7.0
I tried wiping System - no go.
Any trick to this?
EDIT: Is this the issue where one needs to revert from CM to be able to flash non-CM roms? Seems I had this problem with other devices and earlier OSes.
Click to expand...
Click to collapse
Can you try the previous build?
Downloading 160106 now.
EDIT: That went much better. Setting up now.
EDIT2: Flashed ok but getting many force closes. Going to wipe again and try a different gapps.
dvgb173 said:
I couldn't get this to load on my grouper. Stuck on Google screen.
Click to expand...
Click to collapse
Same problem at me. Previous build works fine except for youtube app that has force close
Update
Fixes the non booting issue and up to date with the sources:
https://www.androidfilehost.com/?fid=24389512218018451
GtrCraft said:
Update
Fixes the non booting issue and up to date with the sources:
https://www.androidfilehost.com/?fid=24389512218018451
Click to expand...
Click to collapse
Does youtube app work in the latest build?
GtrCraft said:
Update
Fixes the non booting issue and up to date with the sources:
https://www.androidfilehost.com/?fid=24389512218018451
Click to expand...
Click to collapse
Stuck at Google Logo....did a clean flash.
DutchMan_1990 said:
Stuck at Google Logo....did a clean flash.
Click to expand...
Click to collapse
Me too. 1/26 and 1/13 both get stuck at Google screen on a clean flash. Banks 1/26 and SuperSu 2.66 were the other zips I used.
buffal0b1ll said:
Me too. 1/26 and 1/13 both get stuck at Google screen on a clean flash. Banks 1/26 and SuperSu 2.66 were the other zips I used.
Click to expand...
Click to collapse
Not just Banks gapps, open gapps pico/nano none of them are working. Even tried without flashing the gapps. My guess something is wrong with the ROM zip.
AOSPA for the Oneplus 3/3T
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Features:
its pretty barebones right now but has a few signature paranoid android features like immersive mode.
they also have tons of performance optimizations going on
Install Instructions:
-backup your stuff
-Download Rom, Gapps
-reboot to recovery
-wipe cache data and system
-flash the ROM and Gapps (whichever one you like)
-flash supersu for root
Build info:
20170505: Initial build
MOD EDIT: REMOVED
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Credits:
AOSPA
CAF
CyanogenMod | LineageOS
XDA:DevDB Information
AOSPA for the Oneplus 3/3T, ROM for the OnePlus 3
Contributors
karthick mostwanted, prasoonmehra
ROM OS Version: 7.x Nougat
Based On: AOSP
Version Information
Status: Alpha
Created 2017-05-05
Last Updated 2017-05-05
Bugs:- (ALPHA)
Hardware Keys wont work (Use nave bar :'v)
Snap cam Fc's (OOS cam works)
Video Recording broken (on OOS cam too) (will freeze for 2-3 seconds thereafter will work)
No sound
Other than this
Everything works perfectly fine....
Bugs mentioned above will be ruled out soon!
Enjoy AOSPA
Reserved
OMG....................!!!!!!!!!!!
Cool!!! Been waiting for months!!! Thank you!
EDIT: I believe this isn't the official AOSPA but whatever ?
DragonSlayer240 said:
Cool!!! Been waiting for months!!! Thank you!
EDIT: I believe this isn't the official AOSPA but whatever ?
Click to expand...
Click to collapse
No need to believe check the thread title
karthick mostwanted said:
No need to believe check the thread title
Click to expand...
Click to collapse
Yeah I saw the title right away and that's why I edited my message ?
DragonSlayer240 said:
Yeah I saw the title right away and that's why I edited my message
Click to expand...
Click to collapse
Lol Shana xD
that much excitement xD
Zip is corrupt.
prasoonmehra said:
Lol Shana xD
that much excitement xD
Click to expand...
Click to collapse
**** Senpai noticed me ??
Battlehero said:
Zip is corrupt.
Click to expand...
Click to collapse
Reuploaded again
Nice, after CarbonROM published, now also PA
Guys be aware that this build is missing the device specific optimizations by official AOSPA team!!! Those are closed source until official release.
Edit hardware keys also not working.. This is a showstopper!!
Wow, thanks for this ROM. I'm gonna give it a try, although is not an official build.
Hope it keeps as good as it was un JellyBean times
Lordinal82 said:
Wow, thanks for this ROM. I'm gonna give it a try, although is not an official build.
Hope it keeps as good as it was un JellyBean times
Click to expand...
Click to collapse
It will man
it will
Just wondering, why does the OP and @prasoonmehra have same paypal address in their profiles?
santanah said:
Guys be aware that this build is missing the device specific optimizations by official AOSPA team!!! Those are closed source until official release.
Edit hardware keys also not working.. This is a showstopper!!
Click to expand...
Click to collapse
If you can open your eyes and read 2nd post
It will be very helpful
And better to keep official and unofficial discussion out of this thread... It creates differences between people who want to work in a collab!
I call as I see, both dev's are crooks, with PayPal accounts. A corrupt .zip of an unfinished and non working project. They should be ashamed of them self's.
Rakpere said:
Just wondering, why does the OP and @prasoonmehra have same paypal address in their profiles?
Click to expand...
Click to collapse
Well.... He is a friend.... So no worries
---------- Post added at 02:21 PM ---------- Previous post was at 02:19 PM ----------
DarKAngel1234 said:
I call as I see, both dev's are crooks, with PayPal accounts. A corrupt .zip of an unfinished and non working project. They should be ashamed of them self's.
Click to expand...
Click to collapse
Previous upload stopped in between... The build is re uploaded.... You can download it.... Happens sometime.... Its afh lol
Don't be so harsh in one mistake which wasn't even our fault
prasoonmehra said:
If you can open your eyes and read 2nd post
It will be very helpful
And better to keep official and unofficial discussion out of this thread... It creates differences between people who want to work in a collab!
Click to expand...
Click to collapse
Regarding collaboration, https://gerrit.aospa.co/ may have been a better choice. Feel free to contribute.