Related
I think I posted this in the wrong forum, I suppose I was a little confused on my phone
I have a US AT&T version of the i727 Skyrocket. I think i accidentally flashed an improper kernel:
http://forum.xda-developers.com/showthread.php?t=1369977
I didn't realize I was browsing the wrong forum *sigh*.
Anyway, when I went to reboot after installing the kernel in CWM, I get a black screen. If I hold down both volume buttons and plug in USB, I get nothing. It doesn't seem to put it in download mode. There, it doesn't get recognized in ODIN.
What are my options here? Would a "jig" actually do anything in this case? I can't tell the scenarios it can actually recover from and not.
Hard brick, its done
Jtag or send to samsung
hedpe said:
I think I posted this in the wrong forum, I suppose I was a little confused on my phone
I have a US AT&T version of the i727 Skyrocket. I think i accidentally flashed an improper kernel:
http://forum.xda-developers.com/showthread.php?t=1369977
I didn't realize I was browsing the wrong forum *sigh*.
Anyway, when I went to reboot after installing the kernel in CWM, I get a black screen. If I hold down both volume buttons and plug in USB, I get nothing. It doesn't seem to put it in download mode. There, it doesn't get recognized in ODIN.
What are my options here? Would a "jig" actually do anything in this case? I can't tell the scenarios it can actually recover from and not.
Click to expand...
Click to collapse
If it does absolutely nothing, i'd say you bricked it which is quite possible if you flashed something for another phone. I don't think a jig will do you any good, based on things i've read before. Not 100%. Maybe someone else will give you some better input.
thanks for the replies. I can't get it in to download mode at all, so I'm afraid it's hard bricked.
Are there any guides to doing the jtag repair yourself? I'm pretty tech-savvy and comfortable opening up the phone, etc. I could get my hands on a jtag unit.
I just don't want to keep bricking it and sending it out for another $50. I'd rather have a solution where I can fix it myself.
hedpe said:
thanks for the replies. I can't get it in to download mode at all, so I'm afraid it's hard bricked.
Are there any guides to doing the jtag repair yourself? I'm pretty tech-savvy and comfortable opening up the phone, etc. I could get my hands on a jtag unit.
I just don't want to keep bricking it and sending it out for another $50. I'd rather have a solution where I can fix it myself.
Click to expand...
Click to collapse
I don't know any off hand, but why would you keep bricking it?
xcrazydx said:
I don't know any off hand, but why would you keep bricking it?
Click to expand...
Click to collapse
I'd hope not to, but on my first try I bricked it. I've never bricked my Nexus S after a ton of crappy kernels. Sigh...
Doesn't look like anyone has figured out a homebrew JTAG solution.
hedpe said:
I'd hope not to, but on my first try I bricked it. I've never bricked my Nexus S after a ton of crappy kernels. Sigh...
Doesn't look like anyone has figured out a homebrew JTAG solution.
Click to expand...
Click to collapse
Well, jtag for this phone was just made possible only a month or two ago. There may be a guide somewhere, but I dunno. You flashed something from a completely different phone, any time you do that you are pretty much guaranteed a brick. Just pay attention to what you're doing, man. Read more and flash less.
xcrazydx said:
Well, jtag for this phone was just made possible only a month or two ago. There may be a guide somewhere, but I dunno. You flashed something from a completely different phone, any time you do that you are pretty much guaranteed a brick. Just pay attention to what you're doing, man. Read more and flash less.
Click to expand...
Click to collapse
Right, understandable. Lesson learned there.
I can't tell if this is legitimate or not:
http://www.jtagbox.com/2012/03/page/2/
$50 isn't too bad. Obviously doing it yourself, if you could, would be better. I'd be on the safe side though and have mobiletech (i'm assuming you know about them), do it.
Hello,
I'm brand new to the forums, been reading up on my phone and things to do with it. I've just been running stock everything, unrooted and using GO overlays which I really like. I was thinking of rooting my phone and let me friend play around with it... BIG MISTAKE. My phone won't turn on, boot, power up or anything... Have they bricked my phone and is there ANYTHING at all that I can do to recover it? I was using Kies and have my phone backed up and everything... but assuming it won't even turn on... Does anyone have any advice on some options?
Galaxy SII SkyRocket I727
Rogers - Canada
-Pixie
If it wont turn on it sounds like a hardbrick, what did your friend flash? my guess he probably flashed a SGS II rom. You will have to repair it using jtag for 50$.
If you still got warranty you could try using it.
Going Crazy!
Holding down the volume key doesn't work, I can't download emulators to get it up with the phone unable to function or device drivers be updated or detected at all... I've read and read and read and NOTHING is working... I can see if I can create a jig, I think the parts are all around here somewhere... But is that the ONLY option? If it's hard bricked and they've completely messed it up, does anyone know of ANY potentials whatsoever of how to rebuild this thing back to normal?? Please help, I'm going to ASDLKDJLSKDJ someone up... !!! In the meantime I need to see if I can save this thing!
As I said for hardbrick you'll have to find a jtag repair service nearby and send your phone nad pay 50$.
kishke said:
If it wont turn on it sounds like a hardbrick, what did your friend flash? my guess he probably flashed a SGS II rom. You will have to repair it using jtag for 50$.
If you still got warranty you could try using it.
Click to expand...
Click to collapse
I'm pretty sure I'm under warranty... Pretty sure they're going to be extremely peeved when they find out it's hardbricked from god knows what...
It took a while but I finally found the ordering site for jtag... Going to try that route I s'pose, thank you. Good thing I have an old crap phone as a back-up in the meantime... They don't require the SIM do they? I don't really trust sending that off...
Pixielated said:
I'm pretty sure I'm under warranty... Pretty sure they're going to be extremely peeved when they find out it's hardbricked from god knows what...
It took a while but I finally found the ordering site for jtag... Going to try that route I s'pose, thank you. Good thing I have an old crap phone as a back-up in the meantime... They don't require the SIM do they? I don't really trust sending that off...
Click to expand...
Click to collapse
No sim required. When you pull the battery out and put it back in and hold power do you even get a Samsung logo flash on the screen?
Sent from my SGH-I727 using Tapatalk 2
Pixielated said:
I'm pretty sure I'm under warranty... Pretty sure they're going to be extremely peeved when they find out it's hardbricked from god knows what...
It took a while but I finally found the ordering site for jtag... Going to try that route I s'pose, thank you. Good thing I have an old crap phone as a back-up in the meantime... They don't require the SIM do they? I don't really trust sending that off...
Click to expand...
Click to collapse
go the warranty way. you got nothing to loose
I haven't tried the jig, but all the other symptoms such as dead screen,functionless buttons and all are there, so I think it is Hard Bricked. It's really weird what happened, I rooted my S3, it was working perfectly, then I unlocked the bootloader, it was perfectly fine even after that, then using ROM Manager I installed clockwork recovery mod, it was was working great. Then, I deleted my android market using ES File Explorer, and the guide for replacing the market told me to look for Vending.apk and then delete it, I looked but couldn't find it, so I 100% remember I tapped the search button in ES File Explorer and searched for Vending.apk, then suddenly a window popped up with names of files flashing but it didn't say searching or anything just three dots (...) and under there were two options YES and NO. I pressed No, it closed and then popped up again so this time I pressed Yes. then the names of files kept flashing and then it finished but didn't give me any search result, But my Phone memory was showing Empty, only the sd card folder was there and nothing else so I closed the app and opened it again, still the phone memory was empty, I was freaked out, so I restarted the phone and then, it never started :crying: I don't know what happened. Please help?
odin back to stock and start over....your device is far from hardbricked.
Really?? Can you please tell me step by step what to do?? I'm a complete noob at this!
droidstyle said:
odin back to stock and start over....your device is far from hardbricked.
Click to expand...
Click to collapse
My device does not go into download mode, nor in recovery, it's buttons are useless and there's a completely dead screen.
droidstyle said:
odin back to stock and start over....your device is far from hardbricked.
Click to expand...
Click to collapse
have you tried a different battery?
I forgot to mention, it's brand new, this happened the second day I bought it. So, the battery is flawless and perfect.
droidstyle said:
have you tried a different battery?
Click to expand...
Click to collapse
No its dead for sure. He tried to unlock the us cellualr S3 which would result in a perma brick.
You don't need to unlock the bootloader of the us cellular S3. That is why everything is labeled "verizon unlock" and stuff.
con247 said:
No its dead for sure. He tried to unlock the us cellualr S3 which would result in a perma brick.
You don't need to unlock the bootloader of the us cellular S3. That is why everything is labeled "verizon unlock" and stuff.
Click to expand...
Click to collapse
ahh i missed that detail...yes i agree its dead for sure! jtag or new replacement time.
Since it's only a couple days, take it back into USCC store. You're in your 15 day Window, they should swap it for a new one. Act dumb, don't tell them you rooted it. Just say you heard it buzz and it died. They'll mark it down as defective and give you a new one
How the hell was I supposed to know that? The US Cellular S3 is completely identical to the Verizon one, the only difference is the carrier logo, I rooted it with the Verizon S3's guide everything went perfectly fine, so I continued to do all the other stuff. I just got it 2 days ago :crying: . Huff, I've sent it for JTAG to a friend.
droidstyle said:
ahh i missed that detail...yes i agree its dead for sure! jtag or new replacement time.
Click to expand...
Click to collapse
ShazzyK-IDEOS said:
How the hell was I supposed to know that? The US Cellular S3 is completely identical to the Verizon one, the only difference is the carrier logo, I rooted it with the Verizon S3's guide everything went perfectly fine, so I continued to do all the other stuff. I just got it 2 days ago :crying: . Huff, I've sent it for JTAG to a friend.
Click to expand...
Click to collapse
a simple google search would of told ya that...
http://lmgtfy.com/?q=is+the+bootloader+unlocked+on+the+usc+galaxy+s3
research then flash dont flash then research!
tallgrasshawk said:
Since it's only a couple days, take it back into USCC store. You're in your 15 day Window, they should swap it for a new one. Act dumb, don't tell them you rooted it. Just say you heard it buzz and it died. They'll mark it down as defective and give you a new one
Click to expand...
Click to collapse
Great idea, but, I'm not in the US. I bought this phone from a guy who brought it from the US, I got it for half the price of an S3 here. So now, I don't know what to do, I gave it to friend, I hope he'll fix it, but if he's unable to can I give it to Samsung?
True, well said :'( I messed up big time.
droidstyle said:
a simple google search would of told ya that...
http://lmgtfy.com/?q=is+the+bootloader+unlocked+on+the+usc+galaxy+s3
research then flash dont flash then research!
Click to expand...
Click to collapse
Hi everyone,
I think my fiance might have hard-bricked his (new! Less than 24 hrs old!) Verizon Samsung Galaxy S III. He researched, rooted, set up bit-defender and it was working fine but when he tried to copy music files onto the micro-SD, they appeared to have gone onto the hard-drive instead and made his phone uber sluggish. We had some friends over, so he dropped the issue for a while and then went back to try to fix it only to make things worse. I know there isn't enough detail there about what *else* he tried to do, but when he came to bed last night he was kicking himself for not researching it enough and mentioned that he tried taking the batter out, resetting it, taking the sim card out, resetting it, telling bit defending to wipe the phone, etc. but all it would do last night was just display the 'samsung' logo then go to black.
This morning, I found your threads and tried to do the power+down+home advice that I've seen on a few threads here but it didn't work (obviously).
I suggested using the micro-SD adapter to try to explore the files on a PC, so we might look into that later.
Is there anything else you guys would recommend? I'm thinking the only thing to fix it now is the dopey route. :silly:
-Ami
Your phone is Soft Bricked not hard bricked, otherwise it wouldn't even turn on, Use A USB JIG to force it into download mode, then reflash with Odin.
Aminarra said:
Hi everyone,
I think my fiance might have hard-bricked his (new! Less than 24 hrs old!) Verizon Samsung Galaxy S III. He researched, rooted, set up bit-defender and it was working fine but when he tried to copy music files onto the micro-SD, they appeared to have gone onto the hard-drive instead and made his phone uber sluggish. We had some friends over, so he dropped the issue for a while and then went back to try to fix it only to make things worse. I know there isn't enough detail there about what *else* he tried to do, but when he came to bed last night he was kicking himself for not researching it enough and mentioned that he tried taking the batter out, resetting it, taking the sim card out, resetting it, telling bit defending to wipe the phone, etc. but all it would do last night was just display the 'samsung' logo then go to black.
This morning, I found your threads and tried to do the power+down+home advice that I've seen on a few threads here but it didn't work (obviously).
I suggested using the micro-SD adapter to try to explore the files on a PC, so we might look into that later.
Is there anything else you guys would recommend? I'm thinking the only thing to fix it now is the dopey route. :silly:
-Ami
Click to expand...
Click to collapse
ShazzyK-IDEOS said:
Really?? Can you please tell me step by step what to do?? I'm a complete noob at this!
Click to expand...
Click to collapse
If you're such a noob and unprepared for a brick, maybe you shouldn't have ventured down custom ROM/unlock avenue?
Just a thought.
Sent from my SCH-I535 using Tapatalk 2
ShazzyK-IDEOS said:
Your phone is Soft Bricked not hard bricked, otherwise it wouldn't even turn on, Use A USB JIG to force it into download mode, then reflash with Odin.
Click to expand...
Click to collapse
Yeah, this morning it won't even turn on no Samsung, no hope. Lesson learned... hopefully not a very expensive one.. :fingers-crossed:
Aminarra said:
Yeah, this morning it won't even turn on no Samsung, no hope. Lesson learned... hopefully not a very expensive one.. :fingers-crossed:
Click to expand...
Click to collapse
Pull the battery, put it in and let it charge for a while couple hours. Then hold vol - , home and power. If it week go into download/Odin mode you're fine. If so then go to the development thread stickies and follow droid style guide section 6
Sent from my SGS3 running Eclipse Touchwiz
Great thought, but let me tell you before my Galaxy S3 I owned a Wildfire S, tinkered with it every bit, OC,Rom,bootloader and everything, before that I owned a Huawei U8150, my first android, I literally went bezerk modding that thing. So, I'm not a noob at this,I was a noob at this different Carrier different software kinda thing, I thought the phone was the same and indeed it is, but the difference is that the Verizon's Bootloader is locked. I'm well familiar with everything, I just messed up by not researching that if the bootloader was unlocked already, mainly because I was a bit too excited about getting my S3.
1ManWolfePack said:
If you're such a noob and unprepared for a brick, maybe you shouldn't have ventured down custom ROM/unlock avenue?
Just a thought.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
tallgrasshawk said:
Since it's only a couple days, take it back into USCC store. You're in your 15 day Window, they should swap it for a new one. Act dumb, don't tell them you rooted it. Just say you heard it buzz and it died. They'll mark it down as defective and give you a new one
Click to expand...
Click to collapse
Yup!
Hello,
I followed step-by-step this thread.( http://forum.xda-developers.com/showthread.php?t=1982982 )
Since I ve been a listener and this is first time caller, Im not allowed to reply in Developer section until 10 post are made.
This is my first post and need help.
Everything works just as the DEV explained. The bugs are the known ones, and it works...fine.
But, things like the camera bug (3rd party apps cant use it, like instagram, guess Skype, Google Now, etc...), screenshots and auto-rotation made me want to go back. (I could manage the APN thing by following one of the replier's advices)
So, question is: Is out there a more stable CM10 ROM? (I know the link I related isnt from actual CM10, yet a modified one. But after reaserch I found that the original CM10 also have this same known issues). If there isn't. Is there a way to go back to a bug-free ICS version?
If there is, I would need a step-by-step guide.
Thanks in advance for all replies.
______
Motorola Atrix 2 - CM10/MagicMod ROM
WaltLlanos said:
Hello,
I followed step-by-step this thread.( http://forum.xda-developers.com/showthread.php?t=1982982 )
Since I ve been a listener and this is first time caller, Im not allowed to reply in Developer section until 10 post are made.
This is my first post and need help.
Everything works just as the DEV explained. The bugs are the known ones, and it works...fine.
But, things like the camera bug (3rd party apps cant use it, like instagram, guess Skype, Google Now, etc...), screenshots and auto-rotation made me want to go back. (I could manage the APN thing by following one of the replier's advices)
So, question is: Is out there a more stable CM10 ROM? (I know the link I related isnt from actual CM10, yet a modified one. But after reaserch I found that the original CM10 also have this same known issues). If there isn't. Is there a way to go back to a bug-free ICS version?
If there is, I would need a step-by-step guide.
Thanks in advance for all replies.
______
Motorola Atrix 2 - CM10/MagicMod ROM
Click to expand...
Click to collapse
Sure you can go back to stock ICS.
Find the FXZ file for your region here: http://sbf.droid-developers.org/edison/list.php
Follow The noob guide on how to flash FXZ here: http://forum.xda-developers.com/showthread.php?t=1396650
HELP!!
Waiting4MyAndroid said:
Sure you can go back to stock ICS.
Find the FXZ file for your region here: http://sbf.droid-developers.org/edison/list.php
Follow The noob guide on how to flash FXZ here: http://forum.xda-developers.com/showthread.php?t=1396650
Click to expand...
Click to collapse
I followed the steps to flash the SBF and give my Atrix 2 the stock ICS version again.
I did the whole process and clicked START
After a while, several minutes, it showed
"FAILED FLASHING PROCESS, FAILED FLASHING PROCESS. 5/20 REBOOT-BOOTLOADER -> NO ARRIVAL MESSAGE NOTIFICATION; PHONE DISCONNECTED"
And in the result column it shows FAILED
I made sure the battery was full before begin the process, and I haven't touched the phone at all since it started.
What do I do? It's still plugged and the screen's off (Don't sure if the phone is off). I havent touched a thing.
This is the SBF I downloaded:
InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID285.zip
from here: http://sbf.droid-developers.org/edison/list.php
EDIT:
When still plugged in, I pressed the POWER button, and nothing happened, Thought it was off.
I closed the RSD and unplugged the phone from PC and tried to turn it on. NOTHING HAPPENED.
No LED light, No Moto logo, nothing.
Removed battery, tried again....nothing...at all. ¿Dead?
Is it totally screwed? Nothing to do about? PLEASE HELP ME!. Im about to die.
WaltLlanos said:
I followed the steps to flash the SBF and give my Atrix 2 the stock ICS version again.
I did the whole process and clicked START
After a while, several minutes, it showed
"FAILED FLASHING PROCESS, FAILED FLASHING PROCESS. 5/20 REBOOT-BOOTLOADER -> NO ARRIVAL MESSAGE NOTIFICATION; PHONE DISCONNECTED"
And in the result column it shows FAILED
I made sure the battery was full before begin the process, and I haven't touched the phone at all since it started.
What do I do? It's still plugged and the screen's off (Don't sure if the phone is off). I havent touched a thing.
This is the SBF I downloaded:
InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID285.zip
from here: http://sbf.droid-developers.org/edison/list.php
EDIT:
When still plugged in, I pressed the POWER button, and nothing happened, Thought it was off.
I closed the RSD and unplugged the phone from PC and tried to turn it on. NOTHING HAPPENED.
No LED light, No Moto logo, nothing.
Removed battery, tried again....nothing...at all. ¿Dead?
Is it totally screwed? Nothing to do about? PLEASE HELP ME!. Im about to die.
Click to expand...
Click to collapse
If your phone is ATT version MB865, then you used the wrong SBF. The one to flash is
InlineFlashing_Edison_67.21.125_CFC_P3_APBP.xml.zip md5=2BF9CCD528C05D26523ACC5B38AC76C6
I believe your phone is soft bricked with a dead battery. Find a way to charge your battery and try to RSD again.
Waiting4MyAndroid said:
If your phone is ATT version MB865, then you used the wrong SBF. The one to flash is
InlineFlashing_Edison_67.21.125_CFC_P3_APBP.xml.zip md5=2BF9CCD528C05D26523ACC5B38AC76C6
I believe your phone is soft bricked with a dead battery. Find a way to charge your battery and try to RSD again.
Click to expand...
Click to collapse
Actually, I think he is, sorry to say, super-hardbricked. Take a look here, it has all the proper explanations about bricks:
http://forum.xda-developers.com/showthread.php?t=1937112
If he was on ICS and an AT&T phone and flashed a non-AT&T firmware, he is most likely screwed. We have seen this way too many times, sorry to say, but to the OP, Please read more before trying these type of things and use search and not get too antsy before attempting things. This phone even though it has a bootloader lock, you can still very easily hard brick it.
The OP, just might get lucky and be able to charge his phone with an external charger, but I am pretty sure that will not do it.
I would go on ebay or craigslist and buy a working A2 with a cracked screen (much cheaper this way), and change out the board with your screen and such, and you should be back in business.
@Waiting4MyAndroid, next time you try to help someone ask them for more information, so you/we can be of better help, this guys is obviously a noob, and if we knew which region he was from and which phone he has, we/you could have given him the EXACT link to the correct file, and then walked him through what and what not to do. I am not trying to be a jerk. I am just saying that most people do not search or read these forms, they ask in a dire need and even when you give a link to read something, they are in panic mode and still do not read, and just do what they think is the thing you just mentioned, even though it may not be the right thing. I know this has been covered so many times, but I have learned that no matter what people do not read or search no matter what you mention, that is why we see soooooooo many of these types of posts over and over.
jimbridgman said:
Actually, I think he is, sorry to say, super-hardbricked. Take a look here, it has all the proper explanations about bricks:
http://forum.xda-developers.com/showthread.php?t=1937112
If he was on ICS and an AT&T phone and flashed a non-AT&T firmware, he is most likely screwed. We have seen this way too many times, sorry to say, but to the OP, Please read more before trying these type of things and use search and not get too antsy before attempting things. This phone even though it has a bootloader lock, you can still very easily hard brick it.
The OP, just might get lucky and be able to charge his phone with an external charger, but I am pretty sure that will not do it.
I would go on ebay or craigslist and buy a working A2 with a cracked screen (much cheaper this way), and change out the board with your screen and such, and you should be back in business.
@Waiting4MyAndroid, next time you try to help someone ask them for more information, so you/we can be of better help, this guys is obviously a noob, and if we knew which region he was from and which phone he has, we/you could have given him the EXACT link to the correct file, and then walked him through what and what not to do. I am not trying to be a jerk. I am just saying that most people do not search or read these forms, they ask in a dire need and even when you give a link to read something, they are in panic mode and still do not read, and just do what they think is the thing you just mentioned, even though it may not be the right thing. I know this has been covered so many times, but I have learned that no matter what people do not read or search no matter what you mention, that is why we see soooooooo many of these types of posts over and over.
Click to expand...
Click to collapse
Jim your advice to me is well taken. Usually I do ask more questions before I offer advice. In this case the OP "seemed" knowledgeable due to the fact his phone was on CM10/MagicMod. I guess everyone should be treated as a NOOB until proven other wise! Hopefully the OP can still recover his phone with a charged battery.
Sent from my MB865 using xda app-developers app
Waiting4MyAndroid said:
Jim your advice to me is well taken. Usually I do ask more questions before I offer advice. In this case the OP "seemed" knowledgeable due to the fact his phone was on CM10/MagicMod. I guess everyone should be treated as a NOOB until proven other wise! Hopefully the OP can still recover his phone with a charged battery.
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
No worries. I was going by his join date of Dec. 2012, and only having posted five times, for noting that he was a noob. I have found that a lot of people can talk the talk well in here, but have maybe used another phone that is not like the A2 and tend to easily mess it up. Especially if this is their first android.
Waiting4MyAndroid said:
Jim your advice to me is well taken. Usually I do ask more questions before I offer advice. In this case the OP "seemed" knowledgeable due to the fact his phone was on CM10/MagicMod. I guess everyone should be treated as a NOOB until proven other wise! Hopefully the OP can still recover his phone with a charged battery.
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
Thanks VERY MUCH for your help. And yes, this is my first Android, and first time flashing, and as you supposed, noob.
:/ I want to believe it is the battery and with a charging will revive, but I don't know. The "super-hardbrick" thing makes more sense to me.
IT WAS FULLY CHARGED, it can't drain 98% in a few minutes, can it?...
Aaaaanyways, I will see if by charging the battery and trying it will show a light.
(Will it charge the battery in this state? or I'll have to make it by other means?)
Thanks @Waiting4MyAndroid and @jimbridgman for replying.
EDIT: When I plug it in the wall, nothing happens. No LEDs, no Moto logo, just black screen. It doesn't shows life signals. Same happens when plugged to the PC.
WaltLlanos said:
Thanks VERY MUCH for your help. And yes, this is my first Android, and first time flashing, and as you supposed, noob.
:/ I want to believe it is the battery and with a charging will revive, but I don't know. The "super-hardbrick" thing makes more sense to me.
IT WAS FULLY CHARGED, it can't drain 98% in a few minutes, can it?...
Aaaaanyways, I will see if by charging the battery and trying it will show a light.
(Will it charge the battery in this state? or I'll have to make it by other means?)
Thanks @Waiting4MyAndroid and @jimbridgman for replying.
EDIT: When I plug it in the wall, nothing happens. No LEDs, no Moto logo, just black screen. It doesn't shows life signals. Same happens when plugged to the PC.
Click to expand...
Click to collapse
If that is the case then you will have to try either the Macguvyer method:
http://forum.xda-developers.com/showthread.php?t=892026
Or find someone with a similar phone that works, that will let you use their phone to charge your battery with (another A2 or a bionic).
Those are just so you can see if it is a battery issue, but at this point, I am thinking you are hardbricked.
Do you have an AT&T branded phone (there will be an at&t logo at the bottom front of the phone under the capacitive buttons)?
jimbridgman said:
If that is the case then you will have to try either the Macguvyer method:
http://forum.xda-developers.com/showthread.php?t=892026
Or find someone with a similar phone that works, that will let you use their phone to charge your battery with (another A2 or a bionic).
Those are just so you can see if it is a battery issue, but at this point, I am thinking you are hardbricked.
Do you have an AT&T branded phone (there will be an at&t logo at the bottom front of the phone under the capacitive buttons)?
Click to expand...
Click to collapse
Yes, its an AT&T device. I'll try to charge the battery.
/In the case its hardbrick, there's nothing we can do, right? AT ALL?/
WaltLlanos said:
Yes, its an AT&T device. I'll try to charge the battery.
/In the case its hardbrick, there's nothing we can do, right? AT ALL?/
Click to expand...
Click to collapse
You can try and get AT&T to exchange it for a refurb, just tell them you charged it overnight and woke and it was like this. The only thing is that you must have, had the phone less than a year to qualify for this, and you MUST be in the US.
Otherwise you can buy an A2 on ebay or craigslist with a broken screen and put your good screen on that phone and be back in action. There is a thread in the general section that is a sticky on how to exchange your screen with the phone you get that has a broken one. This will be only if you are out of the year warranty or bought this phone and use it outside the US.
http://forum.xda-developers.com/showthread.php?t=1746094
jimbridgman said:
You can try and get AT&T to exchange it for a refurb, just tell them you charged it overnight and woke and it was like this. The only thing is that you must have, had the phone less than a year to qualify for this, and you MUST be in the US.
Otherwise you can buy an A2 on ebay or craigslist with a broken screen and put your good screen on that phone and be back in action. There is a thread in the general section that is a sticky on how to exchange your screen with the phone you get that has a broken one. This will be only if you are out of the year warranty or bought this phone and use it outside the US.
http://forum.xda-developers.com/showthread.php?t=1746094
Click to expand...
Click to collapse
I'm out of US, so I guess the warranty thing won't work. (Damn, I guess if I get out of this, will NOT ever try to handle upgrades, and flashing and this stuff) I bought the Atrix 2 from e-bay..Its (was) pre-paid.
Thank you so much for everything. And well, sorry for the inconveniences.
By the way, can you explain to me, what did I do exactly to the phone? I mean, what I understand is that I took out the "software" that ran everything in the device (including powering on) and didn't replace it with the new one since the process didn't complete. So in the end, I took the "soul" out of it, leaving just the dead "body". Does it make sense?
WaltLlanos said:
I'm out of US, so I guess the warranty thing won't work. (Damn, I guess if I get out of this, will NOT ever try to handle upgrades, and flashing and this stuff) I bought the Atrix 2 from e-bay..Its (was) pre-paid.
Thank you so much for everything. And well, sorry for the inconveniences.
By the way, can you explain to me, what did I do exactly to the phone? I mean, what I understand is that I took out the "software" that ran everything in the device (including powering on) and didn't replace it with the new one since the process didn't complete. So in the end, I took the "soul" out of it, leaving just the dead "body". Does it make sense?
Click to expand...
Click to collapse
What you did was flash a non AT&T firmware to the device, which causes the phone to "hardbrick" AT&T has some checks built into the hardware that will make the phone "die" if this is done. So if you do get another one, just make sure that you ONLY flash the proper AT&T FXZ file on the SBf-droid.com site, they say which ones are AT&T.
You can flash all the "ROMS" you want, you just can not use a firmware (FXZ) that is not AT&T based, so if you bootloop or softbrick, you need to make sure you use this FXZ file for AT&T ICS:
334.7 MiB 2BF9CCD528C05D26523ACC5B38AC76C6 ATT US InlineFlashing_Edison_67.21.125_CFC_P3_APBP.xml.zip http://sbf.droid-developers.org/edison/InlineFlashing_Edison_67.21.125_CFC_P3_APBP.xml.zip
My guess is that you did not use this file before, and RSD lite began to flash the bootloader, then went to reboot, and the checks happened and saw that the wrong bootloader was flashed and that set off an efuse that "bricked" the phone.
warrenty
Check to see if u have warranty still with motorola. Just give some lame excuse. Dont mention anything about roooting or roms or ull be f'ed. I sent then 2 hard bricked phones so on my 3rd A2 now. Just pay for shipping and it will be back in ur hands in hopefully less than 2 weeks.
Cant enter link cause im newb but motorola com go to service look for a2 and
Its on the bottom left column just enter imei#
widekyle said:
Check to see if u have warranty still with motorola. Just give some lame excuse. Dont mention anything about roooting or roms or ull be f'ed. I sent then 2 hard bricked phones so on my 3rd A2 now. Just pay for shipping and it will be back in ur hands in hopefully less than 2 weeks.
Cant enter link cause im newb but motorola com go to service look for a2 and
Its on the bottom left column just enter imei#
Click to expand...
Click to collapse
That only works, if Motorola warranties the phone in the Country that you live in.
jimbridgman said:
That only works, if Motorola warranties the phone in the Country that you live in.
Click to expand...
Click to collapse
I live in Colombia, and I bought the device on April 2012 on ebay, had it shipped internationally with USPS.
Do you think I can claim warranty for Motorola directly? Obviously not mentioning anything about ROMs, flashing, and anything. But what can I say?
WaltLlanos said:
I live in Colombia, and I bought the device on April 2012 on ebay, had it shipped internationally with USPS.
Do you think I can claim warranty for Motorola directly? Obviously not mentioning anything about ROMs, flashing, and anything. But what can I say?
Click to expand...
Click to collapse
Nope, you can not get moto to warranty it. You are better buying another phone. I would buy one that will be warrantied in your country, just in case something like this happens.
I hard bricked my Verizon Samsung Galaxy S3.
I got the thing rooted just fine and I went to install a new ROM. I downloaded EZ unlock to unlock the bootloader and it all went fine. Then I went to restart it and nothing. It won't turn on at all. It doesn't enter recovery mode or download mode. It doesn't light up when it's plugged into the wall charger or laptop. My computer does make the sound when I connect the phone, but nothing shows up. When I open Odin I can get it to recognize the phone if I press the buttons to go into download mode but then it looses the connection as soon as it says added.
I followed this guide http://forum.xda-developers.com/showthread.php?t=2581166 but it didn't work.
I can't believe I did this. I feel like a total fool. You know that sick feeling that sinks into your gut? Yeah, I have it. I need this thing fixed like now but I don't know what to do. Any help would be greatly appreciated.
lgfuad said:
I hard bricked my Verizon Samsung Galaxy S3.
I got the thing rooted just fine and I went to install a new ROM. I downloaded EZ unlock to unlock the bootloader and it all went fine. Then I went to restart it and nothing. It won't turn on at all. It doesn't enter recovery mode or download mode. It doesn't light up when it's plugged into the wall charger or laptop. My computer does make the sound when I connect the phone, but nothing shows up. When I open Odin I can get it to recognize the phone if I press the buttons to go into download mode but then it looses the connection as soon as it says added.
I followed this guide http://forum.xda-developers.com/showthread.php?t=2581166 but it didn't work.
I can't believe I did this. I feel like a total fool. You know that sick feeling that sinks into your gut? Yeah, I have it. I need this thing fixed like now but I don't know what to do. Any help would be greatly appreciated.
Click to expand...
Click to collapse
You can either use the method you posted or get it jtag'd. Those are your only 2 options in this scenario.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
You can either use the method you posted or get it jtag'd. Those are your only 2 options in this scenario.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Thank you for your reply.
I really got myself stuck in the creek.
I was looking up the jtag stuff last night but I'm still confused about it. Is it a program I can download or a usb stick that I have to buy? Can I get it from a store or do I have to purchase one off Ebay?
Thanks again.
lgfuad said:
Thank you for your reply.
I really got myself stuck in the creek.
I was looking up the jtag stuff last night but I'm still confused about it. Is it a program I can download or a usb stick that I have to buy? Can I get it from a store or do I have to purchase one off Ebay?
Thanks again.
Click to expand...
Click to collapse
It's complex, it rewrites your bootloader to your mother board using a riff box. It isn't something easy that you could buy and operate yourself.
You'd send it out to someone. They'd break apart your phone and rewrite the boot image, put it back together, then send it back. Costs anywhere between $20-60.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
It's complex, it rewrites your bootloader to your mother board using a riff box. It isn't something easy that you could buy and operate yourself.
You'd send it out to someone. They'd break apart your phone and rewrite the boot image, put it back together, then send it back. Costs anywhere between $20-60.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I just want to thank you again for your replies and your patience with my... noobishness.
I swear, I'm never messing around with my phone again. I had my old phone for 4 years and never fooled around with it. I had this one for 2 weeks and destroyed it.
Is there a company you could recommend that I could send it to? I'm in the U.S., Midwest region.
lgfuad said:
I just want to thank you again for your replies and your patience with my... noobishness.
I swear, I'm never messing around with my phone again. I had my old phone for 4 years and never fooled around with it. I had this one for 2 weeks and destroyed it.
Is there a company you could recommend that I could send it to? I'm in the U.S., Midwest region.
Click to expand...
Click to collapse
No problem, glad I could point you in the right direction.
It's not an issue about you messing with your phone. You just have to read more and understand what you're doing before attempting anything. All the information about 4.3 having a locked bootloader and not using ez unlock was readily available. Just next time you decide to root your phone, just read up as much as you can about it before attempting the process.
I really have no recommendations for jtag because I've never had to use it, but I know some eBay sellers can get pretty cheap.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
No problem, glad I could point you in the right direction.
It's not an issue about you messing with your phone. You just have to read more and understand what you're doing before attempting anything. All the information about 4.3 having a locked bootloader and not using ez unlock was readily available. Just next time you decide to root your phone, just read up as much as you can about it before attempting the process.
I really have no recommendations for jtag because I've never had to use it, but I know some eBay sellers can get pretty cheap.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
OMG I got it working. I just had to buy a different card.
Yeah, you're completely right. I'm certainly going to read everything before I attempt something like this again.
Thank you again!