I'm very excited about buying this phone,but i have some questions Before purchase:
[please refer to the number when answering ]
1 - Does this phone works with external keyboard or gamepad/joystick?
2 - Is there any way to stream content to another screen using TV-out or some app (for smart tvs) or even any dongle?
3 - Does this phone deals with the OTG cables and manages to read and write on Flash memory? (I've seen and older post where it was read only for SD cards,but it was before the kit kat update,so, how is it going now?)
Thanks in advance for your support
72off said:
I'm very excited about buying this phone,but i have some questions Before purchase:
[please refer to the number when answering ]
1 - Does this phone works with external keyboard or gamepad/joystick?
2 - Is there any way to stream content to another screen using TV-out or some app (for smart tvs) or even any dongle?
3 - Does this phone deals with the OTG cables and manages to read and write on Flash memory? (I've seen and older post where it was read only for SD cards,but it was before the kit kat update,so, how is it going now?)
Thanks in advance for your support
Click to expand...
Click to collapse
2) You can use Chromecast that is all I know though...
Sent from my XT1034 using Tapatalk
If you have a dlna enabled device, like a 360 or a PS3, you can use an app like Skifta to stream from your phone to it. I use it all the time and it works out fine.
Sent from my XT1034 using xda app-developers app
1. Yes Bluetooth keyboard 2. With kitkat miracast should work 3. Writing might be an issue
Sent from my Moto G using XDA premium 4 mobile app
Thanks @Cooptx
Ravinxx said:
If you have a dlna enabled device, like a 360 or a PS3, you can use an app like Skifta to stream from your phone to it. I use it all the time and it works out fine.
Click to expand...
Click to collapse
My TV is DNLA enabled [Also wifi direct],but i'll be able to send the files from my phone to TV or I'll have to use my tv to browse into my phone memory until finding the file?
techguyone said:
1. Yes Bluetooth keyboard 2. With kitkat miracast should work 3. Writing might be an issue
Click to expand...
Click to collapse
Even with Kit Kat we still having problems to write? Did motorola said something about it? (kind of angry with that) hope they fix ASAP
1) I use my controller with otg
Sent from my XT1032 using xda app-developers app
bobcat913 said:
1) I use my controller with otg
Sent from my XT1032 using xda app-developers app
Click to expand...
Click to collapse
MANY THANKS,very excited now
72off said:
Even with Kit Kat we still having problems to write? Did motorola said something about it? (kind of angry with that) hope they fix ASAP
Click to expand...
Click to collapse
I'm not 100%, but I think u read that KitKat actually removed native OTG storage support.
If that's right, you'll just have to root and use StickMount like I do on my N5
Whilst we're talking about controllers, is there any tool that lets you use your Moto G as a controller for an Android tablet.
So for example I have Fifa 14 on the Android tablet and use my Moto G as the control pad for it..
1) Yes, even can run usb soundcards
2) Yes: Wifi Direct, Miracast, DLNA, Chromecast. No: HDMI, MHL
3) Read only by default, needs root to enable writing
Next time please post your questions in the Q&A thread, thanks.
Miklós
Use this app to use phone as controller. Get it on tab and phone
https://play.google.com/store/apps/details?id=com.tournesol.tabletremote
Sent from my XT1032 using xda app-developers app
Linux on motog
Thanks everybody for support, I have one more question :
4 - Does it runs linux (ubuntu or another linux) on Virtual machine? It's a quad core and 1GB ram
the 2013 version of ubuntu I think is heavier,but maybe the 2010 or 2011 is light enough?
So guys, to make a long story short: Moto G with KITKAT DOES have support to SDCard Readers through OTG cables but ONLY for reading, right? Writing is only possible with rooted phones.
I want to buy one and this is really important for me to know.
Thanks!
FelipeBHZ said:
So guys, to make a long story short: Moto G with KITKAT DOES have support to SDCard Readers through OTG cables but ONLY for reading, right? Writing is only possible with rooted phones.
Click to expand...
Click to collapse
This was apparently true for the Meenova device.....http://www.meenova.com/st/p/m3r.html#devList. But then today a new updated post that reads:
Moto X and Moto G Running Android 4.4
Android 4.4 KitKat update disables external USB storage access on both Moto X and Moto G. You now need to use a third party App to access the Meenova reader (or any other external card readers or USB sticks). Though now you don't need root privilege to write to USB storage on Moto G. We tested and verified the following options, all Apps available from Play Store:
Use App "Nexus Media Importer".
Use App "OTG Disk Explorer".
Use App "Total Commander" (free) and "USB Stick Plugin" (not free).
Install both Apps.
Plug-in the microSD card reader.
Start up "Total Commander" and it will show "USB Stick Plugin" as an option.
Select the "USB Stick Plugin".
If it works, let us all know.
Related
I would like to be able to print from my 7+ I currently have a wireless Kodak printer and use Polaris office. Anyway to get printer support on tnis thing?
KDOG2020 said:
I would like to be able to print from my 7+ I currently have a wireless Kodak printer and use Polaris office. Anyway to get printer support on tnis thing?
Click to expand...
Click to collapse
Printershare. I picked it up a while back as the free app of the day from Amazon. you cam set it up to use the printer over home network or internet, but I use chromes network print feature, it works great
Sent from my HTC Glacier using Tapatalk
those free ones from android market work well too. I also use Google's cloud print to find my printer
hey
try this download the asus/Toshiba printer app and install its been hacked so that you can install on any device
http://forum.xda-developers.com/show....php?t=1204931
hit the thanks button if your happy with my reply
you need to put the link properly...
ok try this as it is being a bit funny with me adding links
got to this link.... http://forum.xda-developers.com/showthread.php?t=1492695
and then select the link displayed on the KChauJen post about replacing system apks
jmar8124 said:
ok try this as it is being a bit funny with me adding links
got to this link.... http://forum.xda-developers.com/showthread.php?t=1492695
and then select the link displayed on the KChauJen post about replacing system apks
Click to expand...
Click to collapse
thanks jmar8124 i needed this lol
Hey, for whoever it may help, I'm printing happily to my HP Bluetooth printer using printershare. I hope to try wifi printing also, but don't currently have access to a Wi-Fi printer.
hi..
yesterday i've tried to connect my gtab to a printer using usb cable (via usb hub for gtab), on notification : "printer detect", but can not print, maybe because its still need driver, is there any possibilities to use usb printer? and if it does, do we have to use samsung only printer?
thanks in advance, and sory for my bad english.
danielkaboom said:
hi..
yesterday i've tried to connect my gtab to a printer using usb cable (via usb hub for gtab), on notification : "printer detect", but can not print, maybe because its still need driver, is there any possibilities to use usb printer? and if it does, do we have to use samsung only printer?
thanks in advance, and sory for my bad english.
Click to expand...
Click to collapse
As far as I know you need to download an app for your tab to print. I would imagine there is one in the market for cheap or free. You would then share it like you would to Facebook, etc.. And select the app
Sent from my HTC Glacier using Tapatalk
ringnutz said:
As far as I know you need to download an app for your tab to print. I would imagine there is one in the market for cheap or free. You would then share it like you would to Facebook, etc.. And select the app
Sent from my HTC Glacier using Tapatalk
Click to expand...
Click to collapse
is it like PrinterShare or Printbot? yes i'm aware there's app for printing, but they used wireless method or cloud method to print (frok what i've tried). what im asking is that using direct usb to the printer to print, because the tab is detecting printer being connected : "printer detect" when i plug usb to the printer but when i try to print from polaris office or gallery using print command, it rejected by : "only samsung printer can be use, you want continue?", then it failed to print (cause im using canon). what i want to ask is there any possibilities to print using other brand by using direct usb and not wireless or cloud method?
thanks.
Not that I know of. Is there no way that you can at least hook it to a computer and just print to it over your home network
Sent from my HTC Glacier using Tapatalk
yes,..i've tried that, and it works. but still curious about expanding the usefull of usb host that tab has. right now with usb hub, i've manage to use keyboard, mouse and a 250gb external hdd alltogether, so im wondering if a usb printer can be use too, after that maybe hoping that i can use my usb mini projector,...hehehe. thanks for the explanation m8, and sorry for my bad english.
thanks.
danielkaboom said:
yes,..i've tried that, and it works. but still curious about expanding the usefull of usb host that tab has. right now with usb hub, i've manage to use keyboard, mouse and a 250gb external hdd alltogether, so im wondering if a usb printer can be use too, after that maybe hoping that i can use my usb mini projector,...hehehe. thanks for the explanation m8, and sorry for my bad english.
thanks.
Click to expand...
Click to collapse
hi my theme has a stock asus apk that lets you print with usb give it a try or download and extract file i think it works haha
i should give it a try,...thanks jmar8124, i will report soon after i did.
edit : oh btw, which asus apk that handle usb printing?
danielkaboom said:
i should give it a try,...thanks jmar8124, i will report soon after i did.
edit : oh btw, which asus apk that handle usb printing?
Click to expand...
Click to collapse
i think its called printshare but im not 100% it works with usb you will need to let me know
finished downloaded, and sorry but i think i've tried using toshiba printershare, its use wireless and cloud method, no direct usb as far as i've been tried. but thanks m8 for trying to help.
and btw, your theme looks nice,..^^
thanks
danielkaboom said:
finished downloaded, and sorry but i think i've tried using toshiba printershare, its use wireless and cloud method, no direct usb as far as i've been tried. but thanks m8 for trying to help.
and btw, your theme looks nice,..^^
thanks
Click to expand...
Click to collapse
thanks mate i will keep looking for you im sure i can pick something up also my friend is a developer so i will ask him if we could possibly mod an apk like print-share to work with the option of USB external storage path
thanks m8,..very appreciate. i hope it doesn't bother you or disturbing your time.
thanks.
danielkaboom said:
thanks m8,..very appreciate. i hope it doesn't bother you or disturbing your time.
thanks.
Click to expand...
Click to collapse
nooo android is my life haha
thanks pal
I just bought a new TV (Samsung UN32EH4000) and I've had very good luck using its ConnectShare USB port to connect to an external hard drive and a flash drive to play music and videos. However, I haven't had any luck connecting my S3. I'm wondering if this is possible? The TV just says "There is no device detected." I toggled it back and forth from MTP and PTP but still no joy. Anyone else got this or any other Android device to work?
This is what you need. It is amazing and you can use it with any HDMI TV.
cam1pbell said:
This is what you need. It is amazing and you can use it with any HDMI TV.
Click to expand...
Click to collapse
n3k said:
Thanks for the reply! That's really cool! I'll consider that. I was really hoping that there was some sort of hack or tweak that would make my S3 mount as an external storage device but if there isn't one I guess this could probably work...
Click to expand...
Click to collapse
there is an app / tweak (root only) that will allow you to mount only the external SD card as a mass storage device like in earlier android phones and that will allow you to do what you want.
If its a dlna enabled TV you can mirror it with your s3
Sent from my SCH-I535 using XDA Premium App
Mystikalrush said:
If its a dlna enabled TV you can mirror it with your s3
Sent from my SCH-I535 using XDA Premium App
Click to expand...
Click to collapse
how? I have a dnla TV and I don't know how to make my tv see my phone.. The settings for dnla are dark and won't let me choose anything on my phone
ddarvish said:
there is an app / tweak (root only) that will allow you to mount only the external SD card as a mass storage device like in earlier android phones and that will allow you to do what you want.
Click to expand...
Click to collapse
Thanks for pointing me in the right direction! I think I found what I'm looking for here forum.xda-developers.com/showthread.php?t=1711009
I'll give it a shot tonite after I get home from work.
ebuechler3 said:
how? I have a dnla TV and I don't know how to make my tv see my phone.. The settings for dnla are dark and won't let me choose anything on my phone
Click to expand...
Click to collapse
I saw a YouTube video of it just search for it s3 dlna, give it a shot - settings, more settings - search for nearby devices (dlna)
Probably search within your TV to make it searchable, but that all on your end.
Sent from my SCH-I535 using XDA Premium App
n3k said:
Thanks for pointing me in the right direction! I think I found what I'm looking for here forum.xda-developers.com/showthread.php?t=1711009
I'll give it a shot tonite after I get home from work.
Click to expand...
Click to collapse
I got it to work! Installed the v1.4 (v1.5 probably would work too) from the link i listed before.
I am trying to connect a wired Xbox 360 controller to my Samsung Galaxy Tab 2 10.1 tablet (running Samsung's stock Android 4.1.1 ROM) via. an OTG adapter.
When I connect it, the following two messages appear:
"High-power USB device connected."
"Can not access to this device. "Connected device needs power supply."
Due to this, USB/BT Joystick Centre can't detect the controller.
Due to the poor English in the second message, I am presuming it's a Samsung ROM issue, rather than an Android/a tablet hardware issue.
Any ideas?
I have same problem with my tab 2 7.0
Sent from my GT-P3110 using xda premium
I also had this problem.
If you plug the joypad into the OTG connector first and then the OTG into the tablet it should work.
at least it did for me.
hope this helps.
xzodia said:
I also had this problem.
If you plug the joypad into the OTG connector first and then the OTG into the tablet it should work.
at least it did for me.
hope this helps.
Click to expand...
Click to collapse
I can't believe that worked! Thank you.
Now USB/BT Joystick Center detects the hardware, and all keypresses. However, no other apps seem to detect any keypresses (e.g. Mupen64Plus, XBMC 12.0 BETA 2 etc.)
King Mustard said:
I can't believe that worked!
Thank you!
Click to expand...
Click to collapse
Your welcome
King Mustard said:
Now USB/BT Joystick Center detects the hardware, and all keypresses. However, no other apps seem to detect any keypresses (e.g. Mupen64Plus, XBMC 12.0 BETA 2 etc.)
Click to expand...
Click to collapse
Yeah i had the same problem on my tablet which is rooted.
But it works perfectly on my sons which is not rooted.
I read somewhere that it had issues if luckypatcher was installed.
but never looked into it anymore as i use a ps3 pad via sixaxis controller app, which allows me to have the tablet on charge while playing.
My Tab had version 6.41 (cracked)
and my sons had 6.44 (paid for)
not sure if the issue is related to the version number or the fact my sons is not rooted and never had luckypatcher on it.
Either way, if your rooted and can get hold of a ps3 pad that is the best way imo.
Other than that make sure you have switched the IME to joypad before opening the emulator and then go to input settings and bind the controllers.
i have got epsxe, mupen, snesgnes all working with both apps, but on different tablets (1 rooted, 1 not)
hope this info helps you figure it out.
I tried what u said but the remote curcle just flashes but doesnt work!!
Sent from my MT11i using xda premium
mitchellreece said:
I tried what u said but the remote curcle just flashes but doesnt work!!
Sent from my MT11i using xda premium
Click to expand...
Click to collapse
Make sure you use USB/BT Joystick Center from the Play Store.
Anyone know where I can get the configuration for controles found some but.. Not mc3/4 I went to joysick web page but they only have for playstation controller not xbox!! Thanks
Sent from my Neo V UHD using Xda Premium
Anyone???
Sent from my Neo V UHD using Xda Premium
mitchellreece said:
Anyone???
Sent from my Neo V UHD using Xda Premium
Click to expand...
Click to collapse
I've been trying also without succes, i followed some tutorials but didn't end up with a working xbox controller
Now I noticed the changelog of CM10.1 says :
Code:
Changes in 20130131 cm10.1 nightly for p3100
Built on Jan 31st (11:31)
Enable wireless Xbox 360 controller support
MERGED ON JAN 30TH AT 22:01:20 IN ANDROID_VENDOR_CM
So I installed CM10.1 & tested with an usb otg but without succes, so my question : does anybody managed to make a tab2 work with his wireless xbox controller ?
King Mustard said:
I can't believe that worked! Thank you.
Now USB/BT Joystick Center detects the hardware, and all keypresses. However, no other apps seem to detect any keypresses (e.g. Mupen64Plus, XBMC 12.0 BETA 2 etc.)
Click to expand...
Click to collapse
So mate, have you managed to put it to work? Ordered my OTG cable so i might be joining this adventure soon on my 7" galaxy tab
Yes i have it working fine with stock rom!! I just need the control configuration for gta vice city!
Sent from my Neo V UHD using Xda Premium
Need Help
King Mustard said:
I can't believe that worked! Thank you.
Now USB/BT Joystick Center detects the hardware, and all keypresses. However, no other apps seem to detect any keypresses (e.g. Mupen64Plus, XBMC 12.0 BETA 2 etc.)
Click to expand...
Click to collapse
Hi King Mustard what did you do to make it work I have the same problem as yours on my tab this is the otg cable I bought
View attachment 1851908
kirhidemi said:
Hi King Mustard what did you do to make it work I have the same problem as yours on my tab this is the otg cable I bought
View attachment 1851908
Click to expand...
Click to collapse
No 30 pin on this thing bud
King Mustard said:
Make sure you use USB/BT Joystick Center from the Play Store.
Click to expand...
Click to collapse
My joystick center connect to my xbox controller and he stops flashing but I still cannot do anything on it. Can someone help me please?
I have a wired 360 controller, and a otg cable. I have everything all hooked up, but when I go to my Octopus app, it tells me there is no device conected and all my xbox 360 controller does is flash green for a while then it will light up player 1 and when I move the sticks on it, it goes back to flashing green. I tried to use a Xbox One controller, the octopus app days there's a xbox one controller hooked to my phone, but when I go to use it, it just makes stuff happen on my xbox one system. PLEASE HELP! I probably wont be getting on this much so if you can just text my number at 606 280 6727
xxBlueVoid25xx said:
I have a wired 360 controller, and a otg cable. I have everything all hooked up, but when I go to my Octopus app, it tells me there is no device conected and all my xbox 360 controller does is flash green for a while then it will light up player 1 and when I move the sticks on it, it goes back to flashing green. I tried to use a Xbox One controller, the octopus app days there's a xbox one controller hooked to my phone, but when I go to use it, it just makes stuff happen on my xbox one system. PLEASE HELP! I probably wont be getting on this much so if you can just text my number at 606 280 6727
Click to expand...
Click to collapse
There's 1. Some ROM side changes needed (you could check old cm-11.0 source, if I remember right they had it in)
And 2. Some kernel changes needed which means you need to compile your own kernel ( https://github.com/kumajaya/android...mmit/3e18d344759a71d937163930198a4bab1630784e )
Good luck!
https://raw.githubusercontent.com/L....1/data/keyboards/Vendor_045e_Product_028e.kl
You could try saving it in
system/usr/keylayout/Vendor_045e_Product_0719.kl
Make sure giving it proper rights.
Latest Custom ROMs by me have Xpad support enabled by default in it's kernel.
Edit:
https://github.com/LineageOS/android_vendor_cm/commit/918a7eaf8d0ddfad8a2c8f705417076ef74b7bbd
Is it possible to designate functions for USB mouse buttons when a mouse is used via OTG so that it more closely replicates how a mouse works on a PC? The mouse behaves differently when hooked up via OTG to how it works on a PC, which is fair enough as its a different O/S. Other functions too e.g. selecting text. This is for a Samsung Tab 2 7", but I'm sure it applies to all Android devices which support OTG USB. I've searched for apps to do this but not found any.
Any ideas?
Sent from my HTC Desire HD using xda app-developers app
just try it without additional app
iwjosi said:
just try it without additional app
Click to expand...
Click to collapse
I've tried it and it works fine, just that I'd like to for example designate copy/paste to right button & select text by click & drag. It's so my kids can use it for homework assignments using word type docs & functions.
Sent from my HTC Desire HD using xda app-developers app
Hi all, I'm writing few lines to guide in the use of a DS4 controller with PS4 Remote Play on Poco F1, and perhaps with any other MIUI based phone.
Starting point: stock Miui 10.1 (Android Pie), stock recovery, rooted with Magisk 18.0 from latest official Twrp just fastbooted.
The requisites are the following:
- install modules Sony Framework v1, 1Controller and SELinuxModeInverter4Magisk v1.0.5A(17000);
- obtain PS4 Remote Play 2.6.0 modded, from another thread here on XDA (latest version 2.7.0 bypasses MagiskHide and detects root, while this modded version doesn't update itself);
- buy and install from Play Store USB/BT Joystick Center 2019 (working substitute for Sixaxis, because MIUI lacks the needed bluetooth drivers and I was not able to have it working over usb);
- use a OTG usb 3.0 cable to connect DS4 and phone.
Now you can map your DS4 with USB/BT JC 2019 in touch emulator mode and enjoy a near-the-original experience playing PS4 Remote Play!
Credits and thanks to all the guys who did the hard work!!!
What about connect my controller with bluetooth?
byjoaxel said:
What about connect my controller with bluetooth?
Click to expand...
Click to collapse
For my experience at the moment it is not possible neither with Sixaxis nor with BT / USB Joystick Center.
It is always possible to install a custom ROM that includes the Bluetooth drivers needed by Sixaxis to work properly.
I'm focused on trying to make Remote Play work at its best on the MIUI stock, just rooted. If I make further progress I will report them here, I hope others will do the same
How did you remove the on screen keypads? Thanks!
This is interesting i have the app set up om my Samsung galaxy tab s3 rooted with magisk. But i can only get it to work on the local network
Sent from my SM-N960U using Tapatalk
ksngdghnt said:
How did you remove the on screen keypads? Thanks!
Click to expand...
Click to collapse
On screen stil there; it's a modded version only to fake version number because the most recent ones do not start with magisk
cdeitrich00 said:
This is interesting i have the app set up om my Samsung galaxy tab s3 rooted with magisk. But i can only get it to work on the local network
Sent from my SM-N960U using Tapatalk
Click to expand...
Click to collapse
Official Remote Play works only over wifi, not strictly over lan.
But you can try a module called Fake Wifi, if your rom allows you to install Xposed framework.
cdeitrich00 said:
This is interesting i have the app set up om my Samsung galaxy tab s3 rooted with magisk. But i can only get it to work on the local network
Sent from my SM-N960U using Tapatalk
Click to expand...
Click to collapse
if you want to do remote play away from home is what you mean, try adding tcp/udp port on your ps4s router
---------- Post added at 05:47 AM ---------- Previous post was at 05:44 AM ----------
BloWer_79 said:
On screen stil there; it's a modded version only to fake version number because the most recent ones do not start with magisk
Click to expand...
Click to collapse
any idea on how to modify the apk to remove the o screen buttons? beeb trying for days. no luck. it sucks specially on my s6. it covers up almost the whole screen. thanks btw
BloWer_79 said:
It is always possible to install a custom ROM that includes the Bluetooth drivers needed by Sixaxis to work properly.
Click to expand...
Click to collapse
Sure it's possible, except those of us who want it can't figure it out, and those who probably know don't care :\
DS4 doesn't work at all in any custom ROM I've tried.
And now, the only way to get DS4 working on stock, is via USB and by buying some app?
I regret buying this phone, I only really got it for gaming :\
CosmicDan said:
Sure it's possible, except those of us who want it can't figure it out, and those who probably know don't care :\
DS4 doesn't work at all in any custom ROM I've tried.
And now, the only way to get DS4 working on stock, is via USB and by buying some app?
I regret buying this phone, I only really got it for gaming :\
Click to expand...
Click to collapse
What app is that
Sent from my SM-N960U using Tapatalk
cdeitrich00 said:
What app is that
Sent from my SM-N960U using Tapatalk
Click to expand...
Click to collapse
Sixaxis something-or-rather, there is a free "test" app.
Hi, I'm also trying to get the app and a controller working but on my Nvidia Shield Tv.
So far I could get the app to work but I couldn't connect any controller to it.
My case is even stranger because the Shield Tv supports many controllers via BT, also DS4 controller. And this controller works in every app without any issues, just not in the ps4 remote play app :/
My ultimate goal would be to use my Xbox one controller for input.
In the app there's the option to register a DS4 controller but it does not work for me..
I did not try sixaxis controller app yet, do you guys think with this app I could register the controller in ps4 remote play app?
And about on screen buttons:
With the help of apps Tasker and AutoInput plugin I could map xbox one controller input to touch input on the coordinates where the on screen buttons are. However if nothing is pressed for a short time, the on screen buttons disappear and my touch input doesn't work until I move mouse cursor and get the onscreen buttons show up again :/
Will they disappear once a DS4 controller is properly connected?
If so, I could then map xbox one controller button presses to the DS4 controller
I just need to get the damn DS4 controller properly connected to the ps3 remote play app -_-
CosmicDan said:
DS4 doesn't work at all in any custom ROM I've tried.
Click to expand...
Click to collapse
It works on resurrection remix but only through bluetooth
ds3 works for me using sixaxis app and this mappinghttps://drive.google.com/file/d/15M1pP_enO5HzWTlJwKAQyku0mQmTzAHy/view?usp=drivesdk
hope it helps. the only problem is that the on screen buttons is still visible. cant see a way to modify the app and remove it
ksngdghnt said:
ds3 works for me using sixaxis app and this mappinghttps://drive.google.com/file/d/15M1pP_enO5HzWTlJwKAQyku0mQmTzAHy/view?usp=drivesdk
hope it helps. the only problem is that the on screen buttons is still visible. cant see a way to modify the app and remove it
Click to expand...
Click to collapse
Which Rom and Kernel are you using ?
Are you using specific magisk modules ?
SerpentSpirale said:
Which Rom and Kernel are you using ?
Are you using specific magisk modules ?
Click to expand...
Click to collapse
im using stock android nougat for my s6
magisk v19.3
magisk manager v7.2
remote play v2.8
Twisted Prime said:
It works on resurrection remix but only through bluetooth
Click to expand...
Click to collapse
Hi, I am in pe custom rom, and I can play with the controller to other games connected to Bluetooth normally. But when in connecte it in the part of the app "register" it doesn't register and I make all that puts in the text, I have redmi note 7. And when I connect normally with Bluetooth the app doesn't recognize it and I only can play with fingers
So maybe you guys can help me. Sorry for resurrecting an older thread but I need some help with this one.
I currently have magisk (v18) and remote play (v2.8) comes on with magisk hide. However no matter what wifi I use, the ps4 will not register to my device. And when I try to use the 8 digit pin, it says failed to register. So what else can I try?
Anyone have any luck using the new one on rooted devices? I always get that 88001003 error. I'm on a rooted OnePlus 7 pro Android 10 stock.