Database Info

[Q] (Q) my eee pad stuck at asus welcome screen why!?

Hi everyone,
Yesterday I tried to install stock rom again by following a tutorial which is on this forum too but since I don't have enough posts to post an post in development section. I decided to post it here
Since I installed the stock rom and kernel on my device I can't boot up anymore It just stuck at the begin screen of asus;s I tried to use NvFlash but without succes because everytime I put my device in APX mode(this works) and then run the .bat file apx mode removes and the bat file says no device found;s
So then I tried wiping all data by using some volume button, tried to cold boot but didn't work neither. Tried to get into recovery but can't boot after that.
SO I would really appreciate it if someone could help me
P.S. I tried this unrooting/stock rom method:
http://forum.xda-developers.com/showthread.php?t=1154947
And I was running Revolver ROM.(latest update)
Yours Kasper

This post would not belong in the development section FYI..you are in the right place, only post in Dev section if you are developing something.
What is your serial number? B70 and later cannot use NVflash from what I understand so if you are B70 or later you may be bricked..

Thanks for your fast reaction! and where can I find my serial number? and if I am bricked is there any way to get un bricked?

kaspertje100 said:
Thanks for your fast reaction! and where can I find my serial number? and if I am bricked is there any way to get un bricked?
Click to expand...
Click to collapse
Look near the charging port, should be a sticker that start with a "B".
Also on the back of the box if you still have it.
Sent from my Transformer TF101 using Tapatalk

Kay thanks, but I removed all my stickers and had to threw away the box when I left America with the plane;s (didn't fit in my bag) So I guess im 70b+ else NvFlash would work? But is there maybe some other way to get my device unbricked or is the only thing I can do is waiting untill Nvflash supports 70b +?

baseballfanz said:
Look near the charging port, should be a sticker that start with a "B".
Also on the back of the box if you still have it.
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
It can also start with a "C" (newest TF's)
---------- Post added at 08:03 PM ---------- Previous post was at 08:01 PM ----------
kaspertje100 said:
Kay thanks, but I removed all my stickers and had to threw away the box when I left America with the plane;s (didn't fit in my bag) So I guess im 70b+ else NvFlash would work? But is there maybe some other way to get my device unbricked or is the only thing I can do is waiting untill Nvflash supports 70b +?
Click to expand...
Click to collapse
You can determine if you can use nvflash. See here

gls9 said:
It can also start with a "C" (newest TF's)
---------- Post added at 08:03 PM ---------- Previous post was at 08:01 PM ----------
You can determine if you can use nvflash. See here
Click to expand...
Click to collapse
well does this only work on linux cuz i can't run this on windows? or how should I run that

Are you stuck on the very first screen that says Eee Pad or the second one that just has a silve ASUS in the middle? Cause if it's the second...it's the bootanimation so couldn't you just go into recovery and clear and reflash?

its the silver I can get into recovery but wiping or cold-booting only results in freeze;s and trying to install a new ROM (EVEN THE official of asus rom) it gives an error the Yellow Triangle above the android man;ss

kaspertje100 said:
its the silver I can get into recovery but wiping or cold-booting only results in freeze;s and trying to install a new ROM (EVEN THE official of asus rom) it gives an error the Yellow Triangle above the android man;ss
Click to expand...
Click to collapse
Assuming you have CWM Recovery...did you try using the Format option...then reinstalling a ROM? Just a thought.

SiNJiN76 said:
Assuming you have CWM Recovery...did you try using the Format option...then reinstalling a ROM? Just a thought.
Click to expand...
Click to collapse
Well I don't have clockwork;s I have stock asus recovery;p

[Q] Help in returning to stock rom

So i'm looking for a little help.
A little while back I used this thread : [GUIDE] TF300T Unlock/Root/Flash for Factory JB Devices (newbie friendly)
To help me install this custom rom : [ROM][TF300]|Mar 28| Energy™ -.¸¸.·´¯ Official JB 4.2.1 Stock or Themed ¯´·.¸¸. -
onto my girlfriends TF300T tablet
and I have this : [RECOVERY][TF300T/TG] TWRP 2.5.0.0 Touch Recovery! [2013-4-9] on there as well
but I can't remember if this was part of the unlock/root/flash process or not, so i'm not sure if it used it during the process or if I added it shortly afterword
now its been while since I have done it but then the tablet started to restart randomly while she was using it.
so I figured no biggie maybe an app got messed up or something, and so I told her to back up her pics, exc she wanted off the unit
and I could look at reinstalling the apps or just taking the unit back to factory rom
about a week later it started to reboot more often randomly
and now it is to the point where it will not make it into the rom
now I can make it into the boot selection where I can choose RCK (for the TWRP), USB, or the other 2 options
and I know I can make it into the TWRP tool as well and it does not repeatedly boot from there, so i'm sure its a rom issue and not a hardware issue, but I could still be wrong
the unit is currently charging so I have not had a chance to try for the usb connection option or anything else yet
hopefully the usb option will work so I can try to recover the pics, exc before taking the unit back to factory
now in the process I know I have unlocked the unit, I believe I have done the min root but have not fully rooted the unit if that makes sense
so i'm just wondering if I will half to fully root (and how do I do that if I do since I can't make it into a rom)
how do I clear the rom that has gone bad
how do I install a factory rom (how do I tell which is the lastest rom, and which one is needed for my unit)
and then I should be good from there
if you need any more info please let me know and maybe some instructions on how to get to that info
in the process of putting the energy rom onto it, I spent a week of reading, researching, and figuring out which way would probably be the safest for me to do, plus the easiest for me to understand
now that it has been so long I have been reading and researching again, I just need that nudge that gets me in the right direction
i'm sure i'm not the only one that has had this issue with a rom, and i'm also sure there is a guide out there already that goes over how to put it back to a factory rom
just for some reason i'm either over looking it or not finding it

allusion said:
So i'm looking for a little help.
A little while back I used this thread : [GUIDE] TF300T Unlock/Root/Flash for Factory JB Devices (newbie friendly)
To help me install this custom rom : [ROM][TF300]|Mar 28| Energy™ -.¸¸.·´¯ Official JB 4.2.1 Stock or Themed ¯´·.¸¸. -
onto my girlfriends TF300T tablet
and I have this : [RECOVERY][TF300T/TG] TWRP 2.5.0.0 Touch Recovery! [2013-4-9] on there as well
but I can't remember if this was part of the unlock/root/flash process or not, so i'm not sure if it used it during the process or if I added it shortly afterword
now its been while since I have done it but then the tablet started to restart randomly while she was using it.
so I figured no biggie maybe an app got messed up or something, and so I told her to back up her pics, exc she wanted off the unit
and I could look at reinstalling the apps or just taking the unit back to factory rom
about a week later it started to reboot more often randomly
and now it is to the point where it will not make it into the rom
now I can make it into the boot selection where I can choose RCK (for the TWRP), USB, or the other 2 options
and I know I can make it into the TWRP tool as well and it does not repeatedly boot from there, so i'm sure its a rom issue and not a hardware issue, but I could still be wrong
the unit is currently charging so I have not had a chance to try for the usb connection option or anything else yet
hopefully the usb option will work so I can try to recover the pics, exc before taking the unit back to factory
now in the process I know I have unlocked the unit, I believe I have done the min root but have not fully rooted the unit if that makes sense
so i'm just wondering if I will half to fully root (and how do I do that if I do since I can't make it into a rom)
how do I clear the rom that has gone bad
how do I install a factory rom (how do I tell which is the lastest rom, and which one is needed for my unit)
and then I should be good from there
if you need any more info please let me know and maybe some instructions on how to get to that info
in the process of putting the energy rom onto it, I spent a week of reading, researching, and figuring out which way would probably be the safest for me to do, plus the easiest for me to understand
now that it has been so long I have been reading and researching again, I just need that nudge that gets me in the right direction
i'm sure i'm not the only one that has had this issue with a rom, and i'm also sure there is a guide out there already that goes over how to put it back to a factory rom
just for some reason i'm either over looking it or not finding it
Click to expand...
Click to collapse
Its very simple to return to stock. But first, do you have the tablets drivers installed on your pc?
---------- Post added at 06:16 AM ---------- Previous post was at 06:14 AM ----------
And do you have fastboot?

if you are talking about the android sdk tools
yes that is installed on my computer from the first time I did the tablet
and I went ahead and did the updates for it as well
and tried plugging the unit in with the fastboot and confirm it shows up in device manager

bump
hope you didn't forget about me crazynitro

allusion said:
bump
hope you didn't forget about me crazynitro
Click to expand...
Click to collapse
sorry, i got caught up with some school work. i could walk you through the process, if you want.

if you could please, any links, post, exc you want me to read ahead of time please post
anything you need me to verify or check on please let me know
gf starting to be up my butt about her tablet, lol
but yes any help is more then appreciated

allusion said:
if you could please, any links, post, exc you want me to read ahead of time please post
anything you need me to verify or check on please let me know
gf starting to be up my butt about her tablet, lol
but yes any help is more then appreciated
Click to expand...
Click to collapse
Lol okay. Theres actually a more simple way.
1. Download the latest asus firmware.
2. Extract the zip file
3. Flash it like a normal rom.
If you cant use this method then you'll have to use fastboot. Here's a link but if you need any help, just ask : http://www.androidauthority.com/transformer-pad-tf300t-restore-stock-firmware-108016/

how do I check the sku according to that guide if i'm not able to load into the android os
that only shows if you can load into the os
would the box have that?

or now looking at the options that I should assume its is a US sku lol

crazynitro said:
3. Flash it like a normal rom.
Click to expand...
Click to collapse
lol, and how do I do that using the twrp?
can't find any detailed instructions on using twrp on flashing a rom, especially the stock one
i'm sure there is a set of detailed instructions cause I swore I saw one once
but i'm not able to find it again
cause I thought besides using the install part there were things I had to clear as well for it to work
oh and yeah the download link for fastboot is no long working in the one guide you gave me to follow so not sure if I already have what it is talking about

allusion said:
lol, and how do I do that using the twrp?
can't find any detailed instructions on using twrp on flashing a rom, especially the stock one
i'm sure there is a set of detailed instructions cause I swore I saw one once
but i'm not able to find it again
cause I thought besides using the install part there were things I had to clear as well for it to work
oh and yeah the download link for fastboot is no long working in the one guide you gave me to follow so not sure if I already have what it is talking about
Click to expand...
Click to collapse
Its simple lol. When you download the firmware from asus, its usually in a .zip form. In it, there is another zip file. Copy that zip file onto your tablet and flash it with twrp.

crazynitro said:
Its simple lol. When you download the firmware from asus, its usually in a .zip form. In it, there is another zip file. Copy that zip file onto your tablet and flash it with twrp.
Click to expand...
Click to collapse
what about having to clear anything? I could of swore the instructions showed going to 2 or 3 spots for clearing data or info or something from the unit

allusion said:
what about having to clear anything? I could of swore the instructions showed going to 2 or 3 spots for clearing data or info or something from the unit
Click to expand...
Click to collapse
Yes. You have to do a factory reset first.

and how do I do that lol, and what happens when I don't do that first

is this tablet now dead since the step of doing the reset was not complete? cause now I can not access twrp and it just sits there with the asus logo and the swirling dots
when I try to access the usb option all I have is rck, android and wipe, rck just gives a failure shortly after trying

allusion said:
lol, and how do I do that using the twrp?
can't find any detailed instructions on using twrp on flashing a rom, especially the stock one
i'm sure there is a set of detailed instructions cause I swore I saw one once
but i'm not able to find it again
cause I thought besides using the install part there were things I had to clear as well for it to work
oh and yeah the download link for fastboot is no long working in the one guide you gave me to follow so not sure if I already have what it is talking about
Click to expand...
Click to collapse
If you want to use twrp, download the us stock firm ware. when you open it, you'll see a file that looks like this: "US_epad-user-10.6.1.15.3". copy that file onto your tablet and flash it like a normal rom. haha
For fastboot, if you have the android sdk, then you already have fastboot so you dont have to download fastboot again.
---------- Post added at 03:36 PM ---------- Previous post was at 03:32 PM ----------
allusion said:
is this tablet now dead since the step of doing the reset was not complete? cause now I can not access twrp and it just sits there with the asus logo and the swirling dots
when I try to access the usb option all I have is rck, android and wipe, rck just gives a failure shortly after trying
Click to expand...
Click to collapse
if you tried installing the newest firmware, you wont see the usb icon when you press power and volume+ it automatically enters fastboot. you dont have to select anything
---------- Post added at 03:39 PM ---------- Previous post was at 03:36 PM ----------
allusion said:
and how do I do that lol, and what happens when I don't do that first
Click to expand...
Click to collapse
if you cant enter twrp, then you dont have to worry about the factory reset you can flash the stock rom using fastboot.

ROM question

I am currently running Cromi Xenogenesis Rom, I was wondering if anyone can suggest a good ROM that's smooth and fast to try that I can just easily do a wipe and flash?
Sent from my ASUS Transformer Pad TF300T using XDA Premium 4 mobile app

MrKite4 said:
I am currently running Cromi Xenogenesis Rom, I was wondering if anyone can suggest a good ROM that's smooth and fast to try that I can just easily do a wipe and flash?
Sent from my ASUS Transformer Pad TF300T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
comi-x is the bext rom by far on this tablet mate by far IMO

Cool thanks, just wanted someones opinion to see if there was a better one.
Sent from my LG-E980 using XDA Premium 4 mobile app

There are other ones that aren't stock based but even so cromi is still my favourite by far
Sent from my Nexus 7 using Tapatalk 4

idk cm10.2 runs pretty dang well. especially oc to 1.5 or 1.6

kaos420 said:
idk cm10.2 runs pretty dang well. especially oc to 1.5 or 1.6
Click to expand...
Click to collapse
its always preference mate i tend to choose stock roms but loads of people love cm 10.2 i think the best thing to do is try them both and then see what you like the most

robgee789 said:
its always preference mate i tend to choose stock roms but loads of people love cm 10.2 i think the best thing to do is try them both and then see what you like the most
Click to expand...
Click to collapse
Hi guys
New to the forum.
Was curious anyone be able to point out where I can read/download some of the roms?
I'm still a little lost on which one to choose for my tablet.
Thanks again.

Lummers said:
Hi guys
New to the forum.
Was curious anyone be able to point out where I can read/download some of the roms?
I'm still a little lost on which one to choose for my tablet.
Thanks again.
Click to expand...
Click to collapse
There all here mate
http://forum.xda-developers.com/forumdisplay.php?f=1582
And if you need any more info just ask mate

robgee789 said:
There all here mate
http://forum.xda-developers.com/forumdisplay.php?f=1582
And if you need any more info just ask mate
Click to expand...
Click to collapse
Thanks for pointing me to the right direction.
I'll be doing a little research before root/rom tonight!
Super excited and can't wait to see what's the potential I'll be unlocking from my tablet.

Was wondering if anyone can help me out.
I've downloaded the unlock from Asus's
Threw it on the SDcard, ran the unlock
I believe it's unlocked, because it says at the top right that device is not locked
I tried this -
Hold Power + Vol Down until a message appears (it doesn't appear anymore on Jelly Bean bootloader) ("Press Vol. Up to enter RCK (5s)") : DON'T PRESS VOL UP
After 5 seconds, a new menu appears (if it's not already there). Press Vol Down once to change to the USB icon, then press Vol. Up to validate (you have to do this in less than 10 seconds, otherwise your tablet will boot Android OS)
But I don't see the option to press/select the USB Icon
I am using the Jelly Bean 4.2
Any tips or pointers
---------- Post added at 11:02 PM ---------- Previous post was at 10:15 PM ----------
Lummers said:
Was wondering if anyone can help me out.
I've downloaded the unlock from Asus's
Threw it on the SDcard, ran the unlock
I believe it's unlocked, because it says at the top right that device is not locked
I tried this -
Hold Power + Vol Down until a message appears (it doesn't appear anymore on Jelly Bean bootloader) ("Press Vol. Up to enter RCK (5s)") : DON'T PRESS VOL UP
After 5 seconds, a new menu appears (if it's not already there). Press Vol Down once to change to the USB icon, then press Vol. Up to validate (you have to do this in less than 10 seconds, otherwise your tablet will boot Android OS)
But I don't see the option to press/select the USB Icon
I am using the Jelly Bean 4.2
Any tips or pointers
Click to expand...
Click to collapse
Didn't realize that my version won't have a USB icon, it's already in FastBoot mode
CWM has been installed on it =)
Next backup with titanium, then going to try out Comi-X!

Lummers said:
Was wondering if anyone can help me out.
I've downloaded the unlock from Asus's
Threw it on the SDcard, ran the unlock
I believe it's unlocked, because it says at the top right that device is not locked
I tried this -
Hold Power + Vol Down until a message appears (it doesn't appear anymore on Jelly Bean bootloader) ("Press Vol. Up to enter RCK (5s)") : DON'T PRESS VOL UP
After 5 seconds, a new menu appears (if it's not already there). Press Vol Down once to change to the USB icon, then press Vol. Up to validate (you have to do this in less than 10 seconds, otherwise your tablet will boot Android OS)
But I don't see the option to press/select the USB Icon
I am using the Jelly Bean 4.2
Any tips or pointers
---------- Post added at 11:02 PM ---------- Previous post was at 10:15 PM ----------
Didn't realize that my version won't have a USB icon, it's already in FastBoot mode
CWM has been installed on it =)
Next backup with titanium, then going to try out Comi-X!
Click to expand...
Click to collapse
Bah....
Anyone able to help me out a little?
When I try to load from zip file I get this -
"e:can't mount /sdcard/"
Seems like it can't see the SDcard or the Internal, making me unable to root the machine......
:crying:

Lummers said:
Was wondering if anyone can help me out.
I've downloaded the unlock from Asus's
Threw it on the SDcard, ran the unlock
I believe it's unlocked, because it says at the top right that device is not locked
I tried this -
Hold Power + Vol Down until a message appears (it doesn't appear anymore on Jelly Bean bootloader) ("Press Vol. Up to enter RCK (5s)") : DON'T PRESS VOL UP
After 5 seconds, a new menu appears (if it's not already there). Press Vol Down once to change to the USB icon, then press Vol. Up to validate (you have to do this in less than 10 seconds, otherwise your tablet will boot Android OS)
But I don't see the option to press/select the USB Icon
I am using the Jelly Bean 4.2
Any tips or pointers
---------- Post added at 11:02 PM ---------- Previous post was at 10:15 PM ----------
Didn't realize that my version won't have a USB icon, it's already in FastBoot mode
CWM has been installed on it =)
Next backup with titanium, then going to try out Comi-X!
Click to expand...
Click to collapse
i wouldnt use cwm mate as it has caused loads of problems for lots of people, you should use twrp mate, here is the best guide http://forum.xda-developers.com/showthread.php?t=2187982

robgee789 said:
i wouldnt use cwm mate as it has caused loads of problems for lots of people, you should use twrp mate, here is the best guide http://forum.xda-developers.com/showthread.php?t=2187982
Click to expand...
Click to collapse
I was totally tossed up on using either CWM or TWRP, I'll load up TWRP and give you a progression update afterwards.
Thanks for the tip.
---------- Post added at 11:01 AM ---------- Previous post was at 10:02 AM ----------
robgee789 said:
i wouldnt use cwm mate as it has caused loads of problems for lots of people, you should use twrp mate, here is the best guide http://forum.xda-developers.com/showthread.php?t=2187982
Click to expand...
Click to collapse
Followed that guide, and wow, that was easy.
Rooted and TWRP as recovery now.
Thank you for your guidance once again.
Now I'm thinking of trying - CROMi-X 5.0.3 ODEX/DEODEX 10.6.1.27.1

Lummers said:
I was totally tossed up on using either CWM or TWRP, I'll load up TWRP and give you a progression update afterwards.
Thanks for the tip.
---------- Post added at 11:01 AM ---------- Previous post was at 10:02 AM ----------
Followed that guide, and wow, that was easy.
Rooted and TWRP as recovery now.
Thank you for your guidance once again.
Now I'm thinking of trying - CROMi-X 5.0.3 ODEX/DEODEX 10.6.1.27.1
Click to expand...
Click to collapse
seriously mate go for it cromi rocks but defiantly choose to disable fsync mate that really speeds up this tablet

robgee789 said:
seriously mate go for it cromi rocks but defiantly choose to disable fsync mate that really speeds up this tablet
Click to expand...
Click to collapse
Yeah I've been looking around and what not, been tossed up on CyanogenMod and the Cromi-X , but I think the features from the Comi-X suites me more.
I'll keep you posted after I test it out, going to do a Nandroid Backup now and install the rom

Curious
I'm just going through the setup/installation process for Cromi-X
Do we have to reflash the ROM to go through the setup, OR can we select some of those options again after the installation?
Such as DSP Manager, X-Loud, and some of the other minor tweaks
Doesn't seem tooo tedious to backup and restore, but I wouldn't want to reflash all the time just to adjust some settings....
Or it's just part of the deal of ROM's.......
All in all, Cromi-X has been installed and I am stoked.

Benchmark Results Request
So I got Comi-X installed
Does anyone have any benchmark results that I can compare to?
Using AnTuTu Benchmark atm and I'm hitting about mid 14000's.
Not sure if that's what this tablet can output to.

Lummers said:
So I got Comi-X installed
Does anyone have any benchmark results that I can compare to?
Using AnTuTu Benchmark atm and I'm hitting about mid 14000's.
Not sure if that's what this tablet can output to.
Click to expand...
Click to collapse
if you want to change any settings mate just reflash the rom and choose to wipe the dalvic cache while going through the settings there is no need to do a full wipe for that and benchmarks aren't everything mate but most people use quadrant, and goddly has gotten over 7000 on that which is crazy high, he got it using thats overclock kernel that was built for the tf700, but hunds kernel can be overclocked and that is built for the tf300 but im using thats v4 kernel which cant be overclocked but i dont think it needs to be and the battery life on thats kernel is crazy good and my tablet is well over a year old

robgee789 said:
if you want to change any settings mate just reflash the rom and choose to wipe the dalvic cache while going through the settings there is no need to do a full wipe for that and benchmarks aren't everything mate but most people use quadrant, and goddly has gotten over 7000 on that which is crazy high, he got it using thats overclock kernel that was built for the tf700, but hunds kernel can be overclocked and that is built for the tf300 but im using thats v4 kernel which cant be overclocked but i dont think it needs to be and the battery life on thats kernel is crazy good and my tablet is well over a year old
Click to expand...
Click to collapse
Hmmm ok
Just curious where would I be able to find other Kernels?
I'm using hunds kernel that came with Cromi-X rom (I'm guessing)
Thanks for all the help btw, totally learning everything quickly.

Lummers said:
Hmmm ok
Just curious where would I be able to find other Kernels?
I'm using hunds kernel that came with Cromi-X rom (I'm guessing)
Thanks for all the help btw, totally learning everything quickly.
Click to expand...
Click to collapse
in the second post of the cromi thread there is a kernel and tweaks installer but here is the link to it any way because im really nice lol
http://d-h.st/zDx
if you use thats kernel for the tf300 then try the undervolt option to give you even better battry life but if you use hunds and want to overclock it then its best to try the overvolt option to increase stability

HELP! Is my phone beyond hope?

Hi All!
I'm brand new to this forum, so thanks for reading this in advance.
I am totally new at this.
My XT926 crashed while I was wiping the google cache and a phone call came in, and now won't get past the motorola logo on bootup. I've tried calling Verizon and Motorola but their solutions have not helped. I have done the factory reset from the recovery menu, and attempted to flash Jelly Bean 4.1.2 using RSD lite and the recovery menu. Having a bit of an issue with installing AdbWinApi.Dll (or some such file)
Here are the issues I'm having:
I don't know how to determine which version of software might possibly be still on the phone. The Verizon Tech seemed to think that all the software on the phone is gone, including the startup file. The fastboot menu
reads:
AP Flashboot Flash Mode (S)
10.9B(*) (sha-61146a2, 2014-07-29 00:54:49)
eMMC Info: Size 32GB
Device is LOCKED, Status Code: 0
Battery OK
Transfer Mode:
USB Connected
I'm not sure if there is a way to get back to the stock software. The phone is out of warranty so if rooting or any other kind of exploit is the way to go, I'm all for it.
I realize you guys have a lot of more exciting things to do, so thanks for any help you can provide. Thanks!

Was the firmware on a 4.1.2 build when it crashed?

93zx7 said:
Was the firmware on a 4.1.2 build when it crashed?
Click to expand...
Click to collapse
What version of Version of android were you using?
---------- Post added at 03:57 AM ---------- Previous post was at 03:55 AM ----------
Cheesehut said:
Hi All!
I'm brand new to this forum, so thanks for reading this in advance.
I am totally new at this.
My XT926 crashed while I was wiping the google cache and a phone call came in, and now won't get past the motorola logo on bootup. I've tried calling Verizon and Motorola but their solutions have not helped. I have done the factory reset from the recovery menu, and attempted to flash Jelly Bean 4.1.2 using RSD lite and the recovery menu. Having a bit of an issue with installing AdbWinApi.Dll (or some such file)
Here are the issues I'm having:
I don't know how to determine which version of software might possibly be still on the phone. The Verizon Tech seemed to think that all the software on the phone is gone, including the startup file. The fastboot menu
reads:
AP Flashboot Flash Mode (S)
10.9B(*) (sha-61146a2, 2014-07-29 00:54:49)
eMMC Info: Size 32GB
Device is LOCKED, Status Code: 0
Battery OK
Transfer Mode:
USB Connected
I'm not sure if there is a way to get back to the stock software. The phone is out of warranty so if rooting or any other kind of exploit is the way to go, I'm all for it.
I realize you guys have a lot of more exciting things to do, so thanks for any help you can provide. Thanks!
Click to expand...
Click to collapse
what version of android were you using?

OGdroidster said:
What version of Version of android were you using?
---------- Post added at 03:57 AM ---------- Previous post was at 03:55 AM ----------
what version of android were you using?
Click to expand...
Click to collapse
Mine just started freezings suddenly

Cheesehut said:
Hi All!
I'm brand new to this forum, so thanks for reading this in advance.
I am totally new at this.
My XT926 crashed while I was wiping the google cache and a phone call came in, and now won't get past the motorola logo on bootup. I've tried calling Verizon and Motorola but their solutions have not helped. I have done the factory reset from the recovery menu, and attempted to flash Jelly Bean 4.1.2 using RSD lite and the recovery menu. Having a bit of an issue with installing AdbWinApi.Dll (or some such file)
Here are the issues I'm having:
I don't know how to determine which version of software might possibly be still on the phone. The Verizon Tech seemed to think that all the software on the phone is gone, including the startup file. The fastboot menu
reads:
AP Flashboot Flash Mode (S)
10.9B(*) (sha-61146a2, 2014-07-29 00:54:49)
eMMC Info: Size 32GB
Device is LOCKED, Status Code: 0
Battery OK
Transfer Mode:
USB Connected
I'm not sure if there is a way to get back to the stock software. The phone is out of warranty so if rooting or any other kind of exploit is the way to go, I'm all for it.
I realize you guys have a lot of more exciting things to do, so thanks for any help you can provide. Thanks!
Click to expand...
Click to collapse
What what version ofvandroivwere you using?
---------- Post added at 04:48 AM ---------- Previous post was at 04:48 AM ----------
93zx7 said:
Mine just started freezings suddenly
Click to expand...
Click to collapse
Is it still freezing?

OGdroidster said:
What what version ofvandroivwere you using?
---------- Post added at 04:48 AM ---------- Previous post was at 04:48 AM ----------
Is it still freezing?
Click to expand...
Click to collapse
Not since I did a hard reboot. It does it sometimes after it sits in suspended state overnight/while charging. It also doesn't seem like any specific app is triggering it. It happens on different apps

93zx7 said:
Not since I did a hard reboot. It does it sometimes after it sits in suspended state overnight/while charging. It also doesn't seem like any specific app is triggering it. It happens on different apps
Click to expand...
Click to collapse
What exactly have you tried to do to solve your situation.

OGdroidster said:
What exactly have you tried to do to solve your situation.
Click to expand...
Click to collapse
So far, the only thing I have done is uninstall several apps I didn't need/use anymore and cleared cache. So far so good. If it starts doing it again, I will be reflashing the firmware is RSD lite. Worse come to worse, I buy another mb/lb and replace the current board in it.

Doesn't sound like hardware

OGdroidster said:
Doesn't sound like hardware
Click to expand...
Click to collapse
What version of rsd are you using?

Honor 8 bricked after failed unroot attempt. Please help!

Hey everyone. I rooted my Honor 8 yesterday using the following guide: https://www.xda-developers.com/honor-8-root-twrp-and-xposed/. Everything seemed to work fine at first, but soon my Bluetooth refused to turn on at random and apps constantly crashed (either on startup or when switching between them). It got annoying very quickly and after searching for hours and not finding any real solution, I decided root wasn't that important to me and I'd just unroot my phone and then hard reset. After using SuperSU's unroot function, my phone turned off and rebooted. But when it got to the blue screen with the honor logo, it froze. Nothing does anything. No matter which buttons I press/hold down. It's just stuck on that screen. I'd love to take out the battery, but with these new phones, it's sadly built in (who ever thought that was a good idea?). It's been this way for close to an hour. ADB doesn't recognize it anymore. The only way my PC seems to recognize it at this point is through the Device Manager, where it shows the yellow warning sign. Under Properties > General it reads "This device cannot start. (Code 10)". I've tried a few different things but none of them have worked. So this is where I'm at now. I'd hate to lose this phone since I just got it three months ago. I would really appreciate any sort of help, because I'm grasping at straws.

Rommco05 said:
Have you still access to twrp? When u trun on phone still is in bootloop. Which is your model and which was system last working?
Click to expand...
Click to collapse
Sorry, I might not have made this clear, but I can't even turn my phone off. It's literally stuck on the blue screen (how fitting). The model should be 51090QMF, but I don't know what you mean with the last part.

Rommco05 said:
51090QMF...??? Model must something like FRD-LxxCxxxBxxx
---------- Post added at 21:08 ---------- Previous post was at 21:08 ----------
Try reboot phone and hold vol +
Click to expand...
Click to collapse
My bad, I just looked it up on Amazon (where I bought it) and it said model number. This should be the real one: FRD-L09. The reboot worked, but it's still stuck on the honor logo. At least we know it's not hard-bricked now.
EDIT: I was able to get into eRecovery. Should I just press "Download latest version and reecovery"?

Rommco05 said:
Which system works last one? and for which region is your phone? Cxxx
Click to expand...
Click to collapse
I bought my phone from the German amazon site, so whichever one that is. I'm sorry, but I don't quite understand your system question. I used 7.0 if that's what you're referring to.

Rommco05 said:
Now understand so your model is FRD-L09?(32Gb ROM)/L19?(64Gb ROM)C432(EU)
So when phone rebooting u still se message your device is unlocked nad cat be trusted?
Click to expand...
Click to collapse
Yes, the 32GB one. And as I said, I was able to get into the Huawei eRecovery. I'm guessing I should just hit "Download latest version and recovery" at this point, but I was waiting just to be sure.

Rommco05 said:
You have still unlocked bootloader?
Try this:
1.create dload folder on inter. storage or sdcard
2.unzip zips which I here posted
3.put uziped separately to float
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v73856/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...3856/f1/full/hw/eu/update_data_full_hw_eu.zip
Click to expand...
Click to collapse
I do still have unlocked Bootloader, but at the moment I have no way to use it. My PC (ADB included) doesn't recognize the phone.

Rommco05 said:
What about two is still in your phone? Unplug phone from usb and reboot, + hold vol up but must be unluged after try dload method with sdcard
Click to expand...
Click to collapse
holding vol up just brings me to the eRecovery menu, where I can't do much. I'm not sure how much of twrp is still on my phone. Before I tried to unroot, all of it was.
EDIT: Sorry, never mind. I got into TWRP.

Rommco05 said:
Try dload method with zips which I posted
---------- Post added at 09:00 PM ---------- Previous post was at 08:56 PM ----------
Bootloader is still unlocked? If yes I tomorrow extract update app send you all parties which u nees to flash over fastboot if dload dont work for you
Click to expand...
Click to collapse
I'm currently downloading your files, my bootloader is unlocked. After I have the files unzipped, do I just flash them? If so, in what order?
Edit: Welp, he went offline. Can someone else tell me what to do with these files?

Rommco05 said:
How wrote before, unzip this files and separately put each unzipped to dload on sdcard, first bigger one
---------- Post added at 09:33 PM ---------- Previous post was at 09:30 PM ----------
If are this files in dload folder turn phone or reboot + hold vol down together with vol up
Click to expand...
Click to collapse
Thank god, it booted. Thank you so much. What would be the best way to go about getting rid of root now? I'm willing to do a factory data reset at this point for everything to work again.

Rommco05 said:
Good job man for properly root go to developer section and twrp 3.1.1-1 by OpenKirin all steps is there
Click to expand...
Click to collapse
I'm just gonna go back to not having root after this, haha. It was just something I wanted to try, I don't need it that much. I did a factory reset and will now get my most important data back on my phone (thankfully I have a backup). Still, thank you so much for your help. I don't know what I would've done without you. I "Thanked" all your posts here, which is the least I can do.