[Q] Unable to flash KitKat Roms - HTC One S

I have been attempting to flash 4.4.2 Roms to my wifes One S without success.
One S S4 Variant
S-OFF
HBOOT 2.15
Radio 1.20
Recoveries I have tried
CWM 6.0.3.1
TWRP 2.6.3.0
On CWM and TWRP it gives the same error:
set_metadata_recursive: some changes failed
E:Error in /sdcard/whatever4.4ROMattempted.zip
(Status 7) *this is in CWM only*
Installation aborted
No matter the ROM I cannot flash a 4.4 KitKat ROM.
Please let me know if you have any ideas at all to attempt.
Thanks for your guys help and input.

Try one of the two linked in this first post of the CM11 for ville thread
http://forum.xda-developers.com/showthread.php?t=2528113
I am using flemmards TWRP variant but the CWM also works.
Good luck.
Sent from my One S using xda app-developers app

Related

[Q] sysyem is unmounted already error during flashing of ROM

Hi,
My HTC Sensation is s-off, rooted and installed with CWM. I was trying to flash Android Revolution HD 6.6.7 version ROM. I already installed the compatible firmware for it. But during installation of ROM, it shows the error----
>>> Formatting partition
E: Error in/sdcard/Android_Revolution_HD-Sensation_6.6.7.zip
(Status 1)
Installation aborted.
Plzzz help
Priyesh1786 said:
Hi,
My HTC Sensation is s-off, rooted and installed with CWM. I was trying to flash Android Revolution HD 6.6.7 version ROM. I already installed the compatible firmware for it. But during installation of ROM, it shows the error----
>>> Formatting partition
E: Error in/sdcard/Android_Revolution_HD-Sensation_6.6.7.zip
(Status 1)
Installation aborted.
Plzzz help
Click to expand...
Click to collapse
no CWM...use 4EXT recovery ..that's compatiable with ARHD rom zip
btw ..my first ever post that i made is also regarding the same issue
Yeah no offence to Koush or anyone that works with CWM, but for the Sensation 4EXT Recovery is the better recovery.
how to install 4ext recovery
ganeshp said:
no CWM...use 4EXT recovery ..that's compatiable with ARHD rom zip
btw ..my first ever post that i made is also regarding the same issue
Click to expand...
Click to collapse
Please guide to flash 4EXT recovery
Priyesh1786 said:
Please guide to flash 4EXT recovery
Click to expand...
Click to collapse
Download this PM58IMG.zip and place it on the root of your SD card and then boot into bootloader to flash it. Remember to remove the file from the root of your SD card after you flash the recovery.

CM11 (Status 7) Error

When trying to "Clean" flash CM11 (cm-11-20131211-Nightly-d2vzw.zip) with CWM (newest version) I get a (status 7) error and installation is aborted. Any ideas, I search the forums and tried a couple things to no avail, first time i've ever seen this when flashing a rom. thanks in advance!
Can you flash other roms or is it just this nightly? Try flashing an older nightly and see what happens. Make sure you have cwm 6.0.4.3
DJz3r0 said:
When trying to "Clean" flash CM11 (cm-11-20131211-Nightly-d2vzw.zip) with CWM (newest version) I get a (status 7) error and installation is aborted. Any ideas, I search the forums and tried a couple things to no avail, first time i've ever seen this when flashing a rom. thanks in advance!
Click to expand...
Click to collapse
You must be on an older version of twrp. Newest fixes that
Sent from my SCH-I535 using xda app-developers app

[Q] T-mobile LG G2 TWRP won't install CM11 ROM

Hi Guys,
Urgent issue. I rooted the device using Kingo, installed TWRP and then transferred the zip for the CM11 nightly and the gapps. I confirmed the nightly was for the D801 model which is T-mobile and the version of the G2 I have. Like a fool I forgot to backup my previous rom and TWRP says:
set_metadata_recursive: some changes failed
E:Error executing updater binary in zip '/sdcard/cm-11-20140208-NIGHTLY-d801.zip'
Error flashing zip '/sdcard/cm-11-20140208-NIGHTLY-d801.zip'
Updating partition details
And there's a red ominous 'Failed' at the bottom of the prompt. Please help, I have no idea what to do, I'm a noob at this. Help is greatly appreciated, thank you!
Regards
mysticgohan_92 said:
Hi Guys,
Urgent issue. I rooted the device using Kingo, installed TWRP and then transferred the zip for the CM11 nightly and the gapps. I confirmed the nightly was for the D801 model which is T-mobile and the version of the G2 I have. Like a fool I forgot to backup my previous rom and TWRP says:
set_metadata_recursive: some changes failed
E:Error executing updater binary in zip '/sdcard/cm-11-20140208-NIGHTLY-d801.zip'
Error flashing zip '/sdcard/cm-11-20140208-NIGHTLY-d801.zip'
Updating partition details
And there's a red ominous 'Failed' at the bottom of the prompt. Please help, I have no idea what to do, I'm a noob at this. Help is greatly appreciated, thank you!
Regards
Click to expand...
Click to collapse
Can you restore the phone and boot back up? If so, replace TWRP with Philz Touch CWM. I had trouble flashing kit kat rom with TWRP too. But Philz Touch recovery seems to works just fine and it also has the option with restore a backup from TWRP too.
super114 said:
Can you restore the phone and boot back up? If so, replace TWRP with Philz Touch CWM. I had trouble flashing kit kat rom with TWRP too. But Philz Touch recovery seems to works just fine and it also has the option with restore a backup from TWRP too.
Click to expand...
Click to collapse
Hi, thanks for your reply. I have resolved all issues. Turns out you need TWRP 2.6.3.5 to flash any CM11 nightlies. Also was using Windows 8.1 so the adb drivers were not straightforward to install to use adb push. I pushed and installed TWRP 2.6.3.5 and then flashed CM11 and she works like a dream!

[Q] unable to flash anyrom after kitkat port

Hi there,
I flashed a KitKat port to test it. However, I decided to go back to Cyanogenmod since it didn't work very well.
However, any ROM that I try to flash appears this error:
format() expects 5 args, got 3
E: Error in /storage/sdcard0/cm-7.2.0-p500.zip
(Status 7)
Installation aborted
what can I do to fix this? thanks
Athosbr99 said:
Hi there,
I flashed a KitKat port to test it. However, I decided to go back to Cyanogenmod since it didn't work very well.
However, any ROM that I try to flash appears this error:
format() expects 5 args, got 3
E: Error in /storage/sdcard0/cm-7.2.0-p500.zip
(Status 7)
Installation aborted
what can I do to fix this? thanks
Click to expand...
Click to collapse
To flash that KitKat, you had to place a newer CWM or TWRP recovery version.
To flash cm-7.2, you need to go back to the older recovery!
For KitKat ROMs a recovery equivalent to 6.0.4.5 or newer is required to flash. The newer recoveries are capable of flashing CM 10.2 to CM11. All older Android versions will require the use of an older recovery, pre 6.0.4.5, such as CWM 5.0.2.7 Touch by vivekkalady.
Dovidhalevi said:
To flash that KitKat, you had to place a newer CWM or TWRP recovery version.
To flash cm-7.2, you need to go back to the older recovery!
Click to expand...
Click to collapse
shinobisoft said:
For KitKat ROMs a recovery equivalent to 6.0.4.5 or newer is required to flash. The newer recoveries are capable of flashing CM 10.2 to CM11. All older Android versions will require the use of an older recovery, pre 6.0.4.5, such as CWM 5.0.2.7 Touch by vivekkalady.
Click to expand...
Click to collapse
nice to know that. I will try later
In other subject, I tried other kitkat roms and they gave me that same error. the only one that worked was Omega. is there any reason to that?
Athosbr99 said:
nice to know that. I will try later
In other subject, I tried other kitkat roms and they gave me that same error. the only one that worked was Omega. is there any reason to that?
Click to expand...
Click to collapse
Sorry, I honestly can't say. I no longer use this device so I've been out of the loop for some time now.
Also having same problem
Can't Flash anyother rom after kitkat port.
plz help me.
Thanks
DevG said:
Can't Flash anyother rom after kitkat port.
plz help me.
Thanks
Click to expand...
Click to collapse
Have you installed any custom kernel?
I am also faced this problem and solved by flashing stock rom with KDZ

[Q] Issue (Status 7)

Hello everyone, I tried to install two ROMs on my Galaxy (Slim and omni) I had root permission and recovery. However, as soon as I try to install zip from my microSD, after a few lines of code, it's stop process. in the last line there is written:
E:Error in /external_sd/(name of rom).zip
(Status7)
installation aborted.
what can I do?
thanks
Desmojack said:
Hello everyone, I tried to install two ROMs on my Galaxy (Slim and omni) I had root permission and recovery. However, as soon as I try to install zip from my microSD, after a few lines of code, it's stop process. in the last line there is written:
E:Error in /external_sd/(name of rom).zip
(Status7)
installation aborted.
what can I do?
thanks
Click to expand...
Click to collapse
Status 7 means that you need a newer recovery. I just used CWM 6.0.4.7 yesterday to put CM11 on my parents tab2.
Hope this helps
Also try installing zip from " internal " storage.
Pp.
Hi, from CWM download page, the latest version is 6.0.2.7 for the Tab2 10.1 wifi (P5110).
With it installed following Cyanogenmod tutorial, I also have the status 7 error when trying to install both Cyanogenmod 11 latest nightly build, or SlimKat 8 stable.
Device is not rooted, but tried to install ZIP files from internal sd.
Checksums are fine.
I'm interested in the answer if you don't mind me to squat your post?
PS: I'm used to use CWM on my gt-i9100 and gt-i9305 with no problem.
Sent from my GT-I9305 using XDA Free mobile app
Finally solved by updating CWM to unnoficial 6.0.5.0 found on the post here.
http://forum.xda-developers.com/showthread.php?t=2548476
Official 6.0.2.7 can't install kitkat roms and CWM team don't update it anymore for the Galaxy tab 2.
Sent from my GT-I9305 using XDA Free mobile app
If you want a more user friendly touch interface, try TWRP from Android Andi's recovery thread.

Categories

Resources