Database Info

Oc

So I rooted my g2x, after I tried every rom I found I am using the latest trigger rom, I think that's the best! I googled for 2 day's now but can't find an answer! I want to Oc my phone now! How and what's the best way?
Sent from my LG-P999 using Tapatalk

klauspabst said:
So I rooted my g2x, after I tried every rom I found I am using the latest trigger rom, I think that's the best! I googled for 2 day's now but can't find an answer! I want to Oc my phone now! How and what's the best way?
Sent from my LG-P999 using Tapatalk
Click to expand...
Click to collapse
I think you need to grab an OC kernal, and there is an app you can use for your processor. I think in development if you look at a sticky it tells you everything.

Just download and flash a custom kern that's OC'able and then install an app (I use setCPU) to over clock to your desired clock speed.
Sent from my G2x running Bionix Reloaded with Dragon-OTA 1.1 kernel

Why does my Phone reboot during a call?

I am trying to find out why my phone is doing this? Could it be a rom or kernel issue? I am running asop+ 2.2 rom and glados 2.7. Or could it be a radio issue?
Sent from my Nexus S using Tapatalk

Glados has a problem with rebooting while calling

It's a known issue in GLaDOS thread. However, some users get a lot of reboots, some never get one.
If you want a quick fix then try flashing another kernel.

Thanks any suggestions on kernals? I have had nothing but issues with matr1x and now it seems glados is giving me issues.
Sent from my Nexus S using Tapatalk

Known issues with GLaDOS. If you want to stay with GLaDOS, you can try:
-Up the voltage a bit if you are using liveoc (or disable liveoc)
-Don't overclock at all
-Disable deep idle
Or you could try matr1x again and maybe up the voltage 25mV across the board (except for 100 and 200mhz) as it is underclocked by default which your phone may not like. Otherwise i'd be trying netarchy, eugene's icup or francos kernel.

Harbb said:
Known issues with GLaDOS. If you want to stay with GLaDOS, you can try:
-Up the voltage a bit if you are using liveoc (or disable liveoc)
-Don't overclock at all
-Disable deep idle
Or you could try matr1x again and maybe up the voltage 25mV across the board (except for 100 and 200mhz) as it is underclocked by default which your phone may not like. Otherwise i'd be trying netarchy, eugene's icup or francos kernel.
Click to expand...
Click to collapse
Matr1x was a nightmare....but I will try some of the others.
Sent from my Nexus S using Tapatalk

djwyman said:
Thanks any suggestions on kernals? I have had nothing but issues with matr1x and now it seems glados is giving me issues.
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
I'd suggest you start with Eugene's kernel (ICUP) because I have used it for a week without a single reboot

Disable deep idle, fixes most problems.
99 problems but a deep idle ain't one.

I switched to icup and it seems to be doing good. Thanks guys. I never had deep idle enabled so that was not my issue
Sent from my Nexus S using Tapatalk

djwyman said:
I am trying to find out why my phone is doing this? Could it be a rom or kernel issue? I am running asop+ 2.2 rom and glados 2.7. Or could it be a radio issue?
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
I'd try to upgrade to ICS or reinstall the ROM. Also check your battery. It it heats abnormally, that might be the issue as well...

Aosp+ 2.2 is ics... but regardless changing kernels fixed the issue.
Sent from my Nexus S using Tapatalk

has anybody had this problem with the CM9 20p1 alpha? My phone rebooted twice just now. Really annoying!

zyrill said:
has anybody had this problem with the CM9 20p1 alpha? My phone rebooted twice just now. Really annoying!
Click to expand...
Click to collapse
I'm on cm9 a20p1 and glados 2.7 and not a single reboot in 1.5 days now. Still testing though.
Sent from my Nexus S using xda premium

djwyman said:
Matr1x was a nightmare....but I will try some of the others.
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
Couldn't handle the Matrix eh?
Haha
Is this v14.0?
Sent from my Nexus S using XDA App

Pretty ironic, considering if you read my thread most people are happy with 14.
Sent from my Nexus S using XDA App

Yeah idk why you would be having problems with matrix, I doubt it's the kernel.

flodb113 said:
I'm on cm9 a20p1 and glados 2.7 and not a single reboot in 1.5 days now. Still testing though.
Click to expand...
Click to collapse
Did you try to have prolonged phone calls as well? That's when it crashed... Every 3 minutes or so. The rest is perfectly fine...

Getting CPU settings to stick

I have been unsuccessful on being able to get CPU settings to stick. I am on clean kernel and its overclockabke up to 1.9, and the low side can be under clocked to 192, with default being 384.
I personally want mine to stick at 192 low and 1728 high...and it does for maybe 5 minutes, then its back to the CPU wide open at 1.9 and low 384.
What can I do to get my settings to stick? I have set on boot checked.
Sent from my HTC One X using xda app-developers app

most early kernels were made to run at the creators best stable overclock. i would use a newer kernel that might have more inherent flexibility such as the new beastmode v4 or ElementalX which might allow you to get a stable overclock at frequencies lower then max.

DvineLord said:
most early kernels were made to run at the creators best stable overclock. i would use a newer kernel that might have more inherent flexibility such as the new beastmode v4 or ElementalX which might allow you to get a stable overclock at frequencies lower then max.
Click to expand...
Click to collapse
Has beastmode setup where I can pull only the boot.IMG out yet?
Sent from my HTC One X using xda app-developers app

joho5 said:
Has beastmode setup where I can pull only the boot.IMG out yet?
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Negative on Beastmode v4. I'm still trying to figure out how to flash that kernel.
In the mean time, I've flashed ElementalX v1.14. So far, settings have stuck, and I'm using kernel tuner.

No frills CPU app works very well for me. Kernel tuner was unable to keep my settings where i wanted them.
Sent from my One X using xda premium

[Kernel] B14CKB1RD [v2.3][9-27-2014][SGH-T699]

B14CKB1RD​Kernel for the Samsung Relay 4G​
B14CKB1RD is a custom kernel meant for 4.4 KitKat based Roms that comes with the freedom of user voltage control as well as Under Voltage Control. There is 8 governors and 8 i/o schedulers. It's built with the 4.10 sabermod toolchain and -o3 compiled for best optimizations and performance. It comes fully stable and suitable for what uses you want from your phone. From best battery life to best performance you can find for your phone on any 4.4 KitKat rom available. As usual happy flashing. Just note i am not responsible if you the user messes up your phone. I will always be around to help in any way i can so if any issues arise please feel free to send me a pm before trolling.
Downloads:
v2.3 For REV3NT3CH Roms (wont work on roms built prior to 7/13/14):
Download: Click Here!
v1.3 For REV3NT3CH Roms (for my rom builds released prior to 7/13/14):
Download: Click Here!
For TeamApexQ Roms:
Temporarily pulled down for development reasons..new link will be available soon
How to Install:
Boot to recovery
Wipe Cache
Wipe Dalvik Cache
Flash Kernel .zip
Reboot to profit
v2.0 Features:
Governors:
Abyssplugv2
Interactive
Ondemand
Optimax
Performance
Smartmax
Uberdemand
Wheatley
I/O Schedulers:
Bfq
Cfq
Deadline
Noop
Row
Sio
SioPlus
Zen
TCP Congestion Controls:
Bic
Cubic
Highspeed
Htcp
Hybla
Illinois
Lp
Reno
Scalable
Vegas
Veno
Westwood
Yeah
Other:
Linux Kernel 3.4.104
CPU Overclock up to 1620mhz
GPU Overclock up to 480mhz
UnderVoltage Control
Governor Tuning
Fast Charge
Source:
click here
Credits & Thanks
@Snuzzo (for teaching me all he knows about kernel)
@falle21 (for beta testing)
TeamApexQ (for their hard work on the Relay)
All the other developers who contribute to the D2 kernel upstream

Changlog 9/27/14
1.)Kernel updated to linux upstream version 3.4.104 straight from kernel.org and to B14CKB1RD v2.3
2.) Added Fast Charge support
3.) Added Optimax Governor and removed unneccesary ones
4.) Did various other fixes in source

As usual my personal preference is Wheatley Governor and SIO I/O scheduler as i get great performance and battery life with it

Awesome!! Thanks for your work. Great battery and performance with this kernel in liquid, carbon and omni! Thanks for do it
Sent from my SGH-T699 using XDA Premium 4 mobile app

Which one do I need for cm11, is it TeamApexQ Roms ?
Can you rename the files to see a difference ?

I can't vouch for which one cm11 will use as its kernel varies between both...what happens is between my ROMs and omni/fat toad is graphical tearing...if one of these 2 causes this said tearing then try the other...I'd say try using TeamApexQ version first...
Sent from my L1QU1D R3L4Y using xda-developers app

Thanks @smartt699 for your generous donation. Its greatly appreciated and will help the family
Sent from my L1QU1D R3L4Y using xda-developers app

Thanks for your efforts! Here's the last_kmsg from a reboot today of this kernel flashed atop your latest Carbon ROM. Hope it helps.

reaper000 said:
Thanks for your efforts! Here's the last_kmsg from a reboot today of this kernel flashed atop your latest Carbon ROM. Hope it helps.
Click to expand...
Click to collapse
Is there an app you use that accesses system files...such as WiFi related...especially one with a lot of ads...or anything...certain themes may also cause reboots as well as using certain kernel tweaking tools
Sent from my L1QU1D R3L4Y using xda-developers app

REV3NT3CH said:
Is there an app you use that accesses system files...such as WiFi related...especially one with a lot of ads...or anything...certain themes may also cause reboots as well as using certain kernel tweaking tools
Sent from my L1QU1D R3L4Y using xda-developers app
Click to expand...
Click to collapse
Notice reboots typically occur when accessing data (Internet) but not only Wi-Fi. No games, just Googling something. Also, using no themes. Did use trickster mod to set up your recommendation of sio/Wheatley, but that's it.
Sent from my Nexus 5 using Tapatalk

reaper000 said:
Notice reboots typically occur when accessing data (Internet) but not only Wi-Fi. No games, just Googling something. Also, using no themes. Did use trickster mod to set up your recommendation of sio/Wheatley, but that's it.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
That's most likely the reason you get reboots...trickstermod is a known issue on a few devices....you can actually set governer and i/o scheduler under performance settings itself....unfortunately there no known fix even if you uninstalled the app except for clean wiping....I do not use any tweaking apps and have yet to get any reboots
Sent from my L1QU1D R3L4Y using xda-developers app

REV3NT3CH said:
That's most likely the reason you get reboots...trickstermod is a known issue on a few devices....you can actually set governer and i/o scheduler under performance settings itself....unfortunately there no known fix even if you uninstalled the app except for clean wiping....I do not use any tweaking apps and have yet to get any reboots
Sent from my L1QU1D R3L4Y using xda-developers app
Click to expand...
Click to collapse
I also have trickster mod along with pimp my rom, and a few others. I have also experienced some reboots until I put min at 1350 and max at 1512 and performance gov and io scheduler row. To do a "clean wipe" does this mean a full factory reset. I hope not. That is just something I am not going to do. That's why I'm still on carbon and not on the liquid rom.
Sent from my SGH-T699 using XDA Premium 4 mobile app
---------- Post added at 03:25 AM ---------- Previous post was at 03:15 AM ----------
chuckiev79 said:
I also have trickster mod along with pimp my rom, and a few others. I have also experienced some reboots until I put min at 1350 and max at 1512 and performance gov and io scheduler row. To do a "clean wipe" does this mean a full factory reset. I hope not. That is just something I am not going to do. That's why I'm still on carbon and not on the liquid rom.
Sent from my SGH-T699 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
If I uninstalled these apps and reinstalled the rom and kernel after would that be enough to get the kernel to work as it should?
Sent from my SGH-T699 using XDA Premium 4 mobile app

chuckiev79 said:
I also have trickster mod along with pimp my rom, and a few others. I have also experienced some reboots until I put min at 1350 and max at 1512 and performance gov and io scheduler row. To do a "clean wipe" does this mean a full factory reset. I hope not. That is just something I am not going to do. That's why I'm still on carbon and not on the liquid rom.
Sent from my SGH-T699 using XDA Premium 4 mobile app
---------- Post added at 03:25 AM ---------- Previous post was at 03:15 AM ----------
If I uninstalled these apps and reinstalled the rom and kernel after would that be enough to get the kernel to work as it should?
Sent from my SGH-T699 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
i suppose a uninstall of trickster mod AND pimp my rom and a dalvik wipe and cache wipe then do a dirty flash of rom and then do the kernel same method will work...but curious as to why use outdated and unsupported apps like this when it has it built into the rom itself....im not intending to come off negative but this app and kernel tuner has been widely known since jellybean to cause reboots and even bricks of some devices. the min cpu should also NEVER be set higher than 480....thats one way to really overheat and kill battery hence why i removed the mpdec touchboost that teamapexq uses

I'd love to add some (or all) of the governors and schedulers to the stock kernel (4.1.2). Do you have a github for the source? It would be super appreciated.

REV3NT3CH said:
i suppose a uninstall of trickster mod AND pimp my rom and a dalvik wipe and cache wipe then do a dirty flash of rom and then do the kernel same method will work...but curious as to why use outdated and unsupported apps like this when it has it built into the rom itself....im not intending to come off negative but this app and kernel tuner has been widely known since jellybean to cause reboots and even bricks of some devices. the min cpu should also NEVER be set higher than 480....thats one way to really overheat and kill battery hence why i removed the mpdec touchboost that teamapexq uses
Click to expand...
Click to collapse
Interesting perspective. I've rooted and run many custom ROMs and kernels on a Galaxy Nexus, Nexus 4, HTC One m7, and Nexus 5 with Trickster Mod and have never seen that app cause random reboots if the kernel parameters are set within reason (no UV or OC). Maybe I've just been lucky, but that would be very, very lucky as that lack of reboots applies to every ROM and every kernel combination with every single device I've tried over a few years. Even though I'm selective as to what I flash, that's in the hundreds as I can flash several times a day. And all with Trickster Mod on board.
The Relay 4G just seems unduly fragile to me. I've seen it reboot more times in a week than the other devices I mentioned randomly reboot in a year. I'm certainly not blaming any dev for this (and am thankful for all the efforts put here) and want to acknowledge just how difficult it must be to squeeze these great ROMs into a device that probably wasn't designed to handle them. Again, no disrespect to the OP.
Sent from my Nexus 5 using Tapatalk

Well nexus devices are built pretty vanilla when it comes to android so its compatibility outreaches more....I've had reboots on every Motorola and HTC devices I've owned....I know for me I haven't had a reboot but I guess I'm lucky....but it could just be small incompatibilities in our code that may cause this and we just haven't found them or figured it out yet
Sent from my L1QU1D R3L4Y using xda-developers app

REV3NT3CH said:
Well nexus devices are built pretty vanilla when it comes to android so its compatibility outreaches more....I've had reboots on every Motorola and HTC devices I've owned....I know for me I haven't had a reboot but I guess I'm lucky....but it could just be small incompatibilities in our code that may cause this and we just haven't found them or figured it out yet
Sent from my L1QU1D R3L4Y using xda-developers app
Click to expand...
Click to collapse
Which is probably why, as a flashaholic, I stick to Nexi(?). My girlfriend, however, insists on a physical keyboard *sigh*.
Thanks for the ROMs and kernel; you're singlehandedly keeping this device relevant. Well, you and TeamApex.
Stop it so I can get her a new phone already...! (kidding)
Sent from my Nexus 5 using Tapatalk

reaper000 said:
Which is probably why, as a flashaholic, I stick to Nexi(?). My girlfriend, however, insists on a physical keyboard *sigh*.
Thanks for the ROMs and kernel; you're singlehandedly keeping this device relevant. Well, you and TeamApex.
Stop it so I can get her a new phone already...! (kidding)
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I would just like to add, if I may, that after uninstalling those apps I have not had any random reboots. Also on a topic unrelated, that viper4android fx app does not play well with poweramp, got rid of poweramp.
Sent from my SGH-T699 using XDA Premium 4 mobile app

chuckiev79 said:
I would just like to add, if I may, that after uninstalling those apps I have not had any random reboots. Also on a topic unrelated, that viper4android fx app does not play well with poweramp, got rid of poweramp.
Sent from my SGH-T699 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
uhhhh im using poweramp just fine....of course i had to set up sound settings within it....which i can guide you through that as well

Also...just to let people know...will be spending the rest of the week updating and further developing the kernel and various other fixes
Sent from my L1QU1D R3L4Y using xda-developers app

Kernels

Can anyone tell me what all kernels are available out there for us?? I seen Checkm8 and Faux, but I haven't seen much out there.

There's the Excalibur kernel for AOSP ROMS
Sent from my HTC6525LVW using XDA Free mobile app

Yeah kernels are sparse for this phone so far! I think that comes with time and source release by HTC.
Sent from my One M8 using XDA Premium 4 mobile app

Just trying to make sure there aren't many out there that we don't know about.
Sent from my HTC6525LVW using Tapatalk

It also sucks since we are Verizon variants we have to have different kernels and I don't think we have enough devs who care about our variant yet to make kernels. I want to overclock but can't cause the kernel out there right now won't work on the Verizon variant.

treahuggs said:
It also sucks since we are Verizon variants we have to have different kernels and I don't think we have enough devs who care about our variant yet to make kernels. I want to overclock but can't cause the kernel out there right now won't work on the Verizon variant.
Click to expand...
Click to collapse
You can overclock with team codecrafts RSL4 kernel. It's clocked at 2.5ghz. Faux also has a new kernel out that I'm using now. You can overclock to 2.8ghz. The international forum has faux's updated kernel.
Sent from my HTC6525LVW using XDA Premium 4 mobile app

Can we get these put on the kernel tab for our phone on the site then?
Also what are you using to set the cpu speeds? Me trying to set the speeds with the default viper one rom settings isnt working for me. Im wondering if I need to buy his app to make it work.

treahuggs said:
Can we get these put on the kernel tab for our phone on the site then?
Also what are you using to set the cpu speeds? Me trying to set the speeds with the default viper one rom settings isnt working for me. Im wondering if I need to buy his app to make it work.
Click to expand...
Click to collapse
I've been using trickster mod, and it's been great for me. No problems with getting the speeds to stick. I also use faux's kernel enhancement from time to time. Both work really well for me.
Sent from my HTC6525LVW using XDA Premium 4 mobile app

I also use trickstermod it never dissapoints but I'm running BoneStock right now and he recommends the stock kernel tho ima flash faux soon. I wish we would get a Google play edition kernel as I'd think that would get rid of the extreme camera lag on our gpe port.
Sent from my HTC6525LVW using Tapatalk