Related
So, this is it! MICROMAX A52 has been rooted!! :laugh:
(I dont own this device, i rooted it for my friends at Indiedevers, dont ask me device specific questions!)
Things you would be needing:
1. SP flash tool -> ver 2.1 (see attatched files!)
2. Download and extract my attatched a52 rooted.rar file.
3. Unlockroot (get it from www.unlockroot.com).
4. MTK drivers (see mtk attatchment on this xda post)
5. ADB drivers (No need to worry about, unlockroot will automatically setup the adb driver while rooting)
Ok so let's move on to the steps:
1. This rar file contains my modified boot.img & the A52 scatter file (needed by SP Tools, tells the SP tools which rom addresses to flash).
2. Install the MTK drivers, just run the InstallDriver.exe program inside the MTK folder).
3. Most of you might be experienced with flashing through SP Tools, for those who are using it for the first time read this excellent guide on how to use it -> MTK Flashing Using SP Tools
4. After flashing, reboot your handset by taking out and reinserting the battery.
5. When the phone boots up go to Settings->Applications->Development and tick mark "Enable Debugging".
6. Now attach your phone using the data cable.
7. Open Unlockroot program through windows start menu.
8. Click the big green root button.
9. It will ask for installing drivers, click "yes"...it's now installing the ADB drivers.
10. Finally it will root your phone and will ask you for rebooting the phone, click yes.
11. Let your A52 reboot.
Finally after booting, check the app drawer for an application "Superuser"...Congratulations!! your A52 is successfully rooted!!!...:highfive:
Credits:
Me! yeah! i did it again!
Sahil Deep, For being awesome
& other indiedevers members who encouraged me!
Caution: You can softbrick your device if you play around much on "GOD MODE" (Superuser mode), know what you are doing and accept the consequences if you make your device unusable (although highly rare)..
ANY QUESTIONS?? DONT HESITATE TO ASK ME!! POST IT TO THE FORUM, NO PM!
&..hey press the 'thanks' button if u think i deserve it..:angel:
Great work bro. If you have given this before 1 day. I may not flash my A52 with Russian Rom of Fly mobile...
...
Please upload the full backup rom of A52 after rooting Complete Anybody...
I have lost my A52 backup.
Is your a52 working?
Sent from my Karbonn_A18 using xda app-developers app
vshlkmr said:
So, this is it! MICROMAX A52 has been rooted!! :laugh:
(I dont own this device, i rooted it for my friends at Indiedevers, dont ask me device specific questions!)
Things you would be needing:
1. SP flash tool -> ver 2.1 (see attatched files!)
2. Download and extract my attatched a52 rooted.rar file.
3. Unlockroot (get it from www.unlockroot.com).
4. MTK drivers (see mtk attatchment on this xda post)
5. ADB drivers (No need to worry about, unlockroot will automatically setup the adb driver while rooting)
Ok so let's move on to the steps:
1. This rar file contains my modified boot.img & the A52 scatter file (needed by SP Tools, tells the SP tools which rom addresses to flash).
2. Install the MTK drivers, just run the InstallDriver.exe program inside the MTK folder).
3. Most of you might be experienced with flashing through SP Tools, for those who are using it for the first time read this excellent guide on how to use it -> MTK Flashing Using SP Tools
4. After flashing, reboot your handset by taking out and reinserting the battery.
5. When the phone boots up go to Settings->Applications->Development and tick mark "Enable Debugging".
6. Now attach your phone using the data cable.
7. Open Unlockroot program through windows start menu.
8. Click the big green root button.
9. It will ask for installing drivers, click "yes"...it's now installing the ADB drivers.
10. Finally it will root your phone and will ask you for rebooting the phone, click yes.
11. Let your A52 reboot.
Finally after booting, check the app drawer for an application "Superuser"...Congratulations!! your A52 is successfully rooted!!!...:highfive:
Credits:
Me! yeah! i did it again!
Sahil Deep, For being awesome
& other indiedevers members who encouraged me!
Caution: You can softbrick your device if you play around much on "GOD MODE" (Superuser mode), know what you are doing and accept the consequences if you make your device unusable (although highly rare)..
ANY QUESTIONS?? DONT HESITATE TO ASK ME!! POST IT TO THE FORUM, NO PM!
&..hey press the 'thanks' button if u think i deserve it..:angel:
Click to expand...
Click to collapse
Good work u kickd the micromax:thumbup:
sent from my rooted a52
vshlkmr said:
Is your a52 working?
Sent from my Karbonn_A18 using xda app-developers app
Click to expand...
Click to collapse
Yes My A52 working. But it is all now Fly Like view. All boot logos are of fly. Yes it is rooted but I want the original rooted stock ROM of MMX A52. If you can help it will be great.
Pls post full rom some people unable to switch 3g to 2g or 2g to 3g
Thanks
sent from my rooted a52
Now we try for a up-gradation to ICS.
helloansuman said:
Now we try for a up-gradation to ICS.
Click to expand...
Click to collapse
I think ics not supported bcoz mmx a52 screen resolution is very lowlow
sent from my rooted a52
For all of you who need The stock rom check out The a52 indiedevers group page on fb...
Then flash The stock rom and then flash my boot.img..you will get everything Micromax + root..
Sent from my Karbonn_A18 using xda app-developers app
piracyhater said:
I think ics not supported bcoz mmx a52 screen resolution is very lowlow
sent from my rooted a52
Click to expand...
Click to collapse
A52's ram and screen is really low to meet ics requirements..
Sent from my Karbonn_A18 using xda app-developers app
bro congrats for the root please clarify if your rom can be unrooted if needed
also i cant find any ROM on FB page ... please give link
3. Most of you might be experienced with flashing through SP Tools, for those who are using it for the first time read this excellent guide on how to use it -> MTK Flashing Using SP Tools
4. After flashing, reboot your handset by taking out and reinserting the battery.
P.S. which option to select when flashing with SPflash tool please elaborate a bit
Finally I too got it rooted, used only bootimg option for spflash tool. and refer to op attached img file. it works...!!!!!
method works.. I recd brom error after flashing but on using unlockroot it worked
so ignore the error if u like to risk.
kartikoli said:
bro congrats for the root please clarify if your rom can be unrooted if needed
also i cant find any ROM on FB page ... please give link
3. Most of you might be experienced with flashing through SP Tools, for those who are using it for the first time read this excellent guide on how to use it -> MTK Flashing Using SP Tools
4. After flashing, reboot your handset by taking out and reinserting the battery.
P.S. which option to select when flashing with SPflash tool please elaborate a bit
Click to expand...
Click to collapse
:good:
kartikoli said:
bro congrats for the root please clarify if your rom can be unrooted if needed
also i cant find any ROM on FB page ... please give link
3. Most of you might be experienced with flashing through SP Tools, for those who are using it for the first time read this excellent guide on how to use it -> MTK Flashing Using SP Tools
4. After flashing, reboot your handset by taking out and reinserting the battery.
P.S. which option to select when flashing with SPflash tool please elaborate a bit
Click to expand...
Click to collapse
Select The bootimg option, then click on The option and select The path of my modified boot.img file, then connect your phone and flash it!!!
& Yeah if you want you can again un root your device by just pressing The un root button on The unlockroot programme you rooted with!! No need of flasing The original boot.img!
Sent from my Karbonn_A18 using xda app-developers app
Nothing happen when i click to download ADB drivers
kartikoli said:
Nothing happen when i click to download ADB drivers
Click to expand...
Click to collapse
Then download and install super-one-click root, it'll do everything for you..
Link->
http://forum.xda-developers.com/showthread.php?t=803682
Sent from my Karbonn_A18 using xda app-developers app
i have already tried it but the problem is with the drivers as it cant find the device
---------- Post added at 06:49 AM ---------- Previous post was at 05:55 AM ----------
rooted the device ... thanks for every thing
when i run new version of super1click then it asked me to install drivers and then later used unlockroot to root the device
now customizing and freeing the phone with Root Uninstaller Pro
Bro if you dont mind then can you post this root on androidforums so that users can get max search results
---------- Post added at 07:33 AM ---------- Previous post was at 06:49 AM ----------
Help plzzzz i have freezed few apps using uninstaller pro and now my phone doesnt boots to desktop. i can see the boot anomation but it get stuck on that screen
please help me
I root my phone following process it stuck on 99% and when I boot it shows only welcome screen im on and off and on many time my phone on since last night but no progress pls help is my phone going to die pls help no body answer me pls help me developers
Can anybody tell me the output of the commands in cmd? ( for those who have rooted their MMX A52 )
Enable debugging mode, connect your data cable & run these commands
adb shell
su
cat proc/mtd
helloansuman said:
Can anybody tell me the output of the commands in cmd? ( for those who have rooted their MMX A52 )
Enable debugging mode, connect your data cable & run these commands
adb shell
su
cat proc/mtd
Click to expand...
Click to collapse
You wanna backup The mtd partitions eh? Well download terminal emulator from play store u can use these commands in that
Sent from my Karbonn_A18 using xda app-developers app
[email protected] bro any plan to release first ROM for this phone
**************************
MAY 2013 update [root & unROOT]
**************************
Spice mi-1010 is pre-rooted by company. Check by going to android settings -> about device -> kernel version
BUT the su binary is so modified tat u WONT get root access as device user but u WILL get root access as adb user. So all am gonna do here is install the latest unrestricted su binary thru adb
REMEMBER => do NOT mess with the busybox, its custom modded by spice (its better if u donno wat busybox is &/or how to mess/update it)
*************************
all other rooting methods for mi-1010 (wherever u've found it) r simply WRONG!!! because of wat i've just explained. if u have done them, i suggest u to reinstall the stock firmware again. its available in another post of mine, linked below
*************************
Driver Installation...
1. Install attached PDAnet
2. choose BRAND as OTHER
3. MUST exit the pdanet app that'll auto start (system tray) after installation
*************************
Enable on yr device...
1. setting > developer option > USB debugging
2. setting > developer option > allow mock location
3. setting > security > unknown sources
*************************
start DEVICE MANAGER on PC, keep an eye & plugin mi-1010... a new device sud pop up in device manager. it sud NOT have any EXCLAMATION or QUESTION mark beside
*************************
Download attached [size=+1]sadhu.mi1010.may.2013.rar[/size]
*************************
to root => run [size=+1]ROOT.sadhu.mi1010.may.2013.bat[/size]
to unROOT => run [size=+1]unROOT.sadhu.mi1010.may.2013.bat[/size]
*************************
After ROOTing...
1. download latest "superSU" from play store
2. in superSU settings, install it to SYSTEM
3. dont touch the busybox
*************************
hit THANKS if u appreciate
*************************
sadhu_s60 said:
**************************
MAY 2013 update [root & unROOT]
**************************
Spice mi-1010 is pre-rooted by company. Check by going to android settings -> about device -> kernel version
BUT the su binary is so modified tat u WONT get root access as device user but u WILL get root access as adb user. So all am gonna do here is install the latest unrestricted su binary thru adb
REMEMBER => do NOT mess with the busybox, its custom modded by spice (its better if u donno wat busybox is &/or how to mess/update it)
*************************
all other rooting methods for mi-1010 (wherever u've found it) r simply WRONG!!! because of wat i've just explained. if u have done them, i suggest u to reinstall the stock firmware again. its available in another post of mine, linked below
*************************
Driver Installation...
1. Install attached PDAnet
2. choose BRAND as OTHER
3. MUST exit the pdanet app that'll auto start (system tray) after installation
*************************
Enable on yr device...
1. setting > developer option > USB debugging
2. setting > developer option > allow mock location
3. setting > security > unknown sources
*************************
start DEVICE MANAGER on PC, keep an eye & plugin mi-1010... a new device sud pop up in device manager. it sud NOT have any EXCLAMATION or QUESTION mark beside
*************************
Download attached [size=+1]sadhu.mi1010.may.2013.rar[/size]
*************************
to root => run [size=+1]ROOT.sadhu.mi1010.may.2013.bat[/size]
to unROOT => run [size=+1]unROOT.sadhu.mi1010.may.2013.bat[/size]
*************************
After ROOTing...
1. download latest "superSU" from play store
2. in superSU settings, install it to SYSTEM
3. dont touch the busybox
*************************
hit THANKS if u appreciate
*************************
Click to expand...
Click to collapse
any rom for this tab like cm 10
japjit100 said:
any rom for this tab like cm 10
Click to expand...
Click to collapse
donno bro, am out of country with limited internet
Waiting for Rom development.
adb always shows DEVICE NOT FOUND
I have Spice Mi 1010.. I m trying to root this...
I already installed RockChip Drivers... but, still it says "DEVICE NOT FOUND"
Plz help me on this
U need to forget rockchip & any/everything else.... just do ONLY & EXACTLY as described
**rockchip driver is for FIRMWARE purpose ONLY
sadhu_s60 said:
U need to forget rockchip & any/everything else.... just do ONLY & EXACTLY as described
**rockchip driver is for FIRMWARE purpose ONLY
Click to expand...
Click to collapse
Thanks for the Quick Response....
I m using Windows 7 64bit... ADB from your zip file didnt work for me, it was showing Side-by-side Error(something like that).. Then, I used new AD B driver and then adb command didnt give any ERROR.
The main issue I had is, We need to ADD ADB_USB.INI file. 'coz, google says, all devices cannot be detected from ADB, in that case, we need to find our device Vendor ID and then put it in ini file. Then my device got detected. Now, Everything is fine...
- My Next attempt is to get CWM installed on this device. Then will make a custom ROM. I read that, RK3066 Retina display modules work on any RK3066 device.. I ll give a try.. If you already installed CWM on this device, plz do let me know.
If you dont mind, can u add a Trouble shooting section in First post and add below data:
1. Unzip and Copy Attached file in C:\users\Username\.android folder. So, file is C:\user\Username\.android\adb_usb.ini
2. Then on ADB, run these commands, adb kill-server and adb devices. Now, you device should be displayed.
In case, if you still cant find it, then search for LUSB.EXE file from google and run it, it displays your device Vendor and Product ID's. Then, open attached file(adb_usb.ini)(use Notepad++ or Textpad editor) and add your device Vendor ID in the last line just like I did
Bro, don't get too excited with spice mi1010... it'll die on U someway or the other, before U develop any FW for it... its a piece of junk
Then when it dies & U give it to service, u'll get a completely bashed up piece of junk which U won't feel like using anymore... then u'll tell them to give U a better condition piece & they'll give U a even more bashed up piece & the circle will go on 1month for each transaction... & finally u'll come home & either use sell_the_****_till_it_turns_on.ini or >adb hammer
I wrote all this during the 1st 1 month tat the device worked... after that 2months of service & then sold off
What I wrote WORKED!!! But now obviously there's better tricks
& I don't have the device or any other android to test anymore... I've moved on to windows ecosystem with Asus vivotab smart LTE
sadhu_s60 said:
I wrote all this during the 1st 1 month tat the device worked... after that 2months of service & then sold off
What I wrote WORKED!!! But now obviously there's better tricks
& I don't have the device or any other android to test anymore... I've moved on to windows ecosystem with Asus vivotab smart LTE
Click to expand...
Click to collapse
Ohh.. Thanks for you suggestion.. Anyway, its working good as of now, I will try to use it with care.
I m very glad to say that CWM worked on my device and I already extracted SYSTEM folder from Stock image. Hope I can create a custom Rom now...
Thanks for this mate.. was helpful to root my 2 yrs old device
How to root this tab running 4.2.2 ??
For more details about the model of this tab, (www qtab com)
How to Root Qtab + ADB Driver Installation Without Restore ROM
ateam_7 said:
How to root this tab running 4.2.2 ??
For more details about the model of this tab, (www qtab com)
Click to expand...
Click to collapse
Dear,
Please follow the instruction to root New Qtab JB 4.22 using Bin4ry method.
1-First you need to enable USB debugging mode in your phone setting > Develpoer Option > enable usb debugging.
2-Download ADB Drivers for all chinese tablets from here http://droidchina.com/forum/Thread-PDAnet-ADB-USB-Driver-For-Windows
its called PdaNetA4126.zip. Install the driver and connec your Qtab to PC through usb when propted. It will install the driver.
3- Now download Root_with_Restore_by_Bin4ry_v32 from http://forum.xda-developers.com/showthread.php?t=1886460 and rclick on runme.bat.
4- Follow the instruction (select option # 1 - New Standard root) and follow the instructions. It will reboot twice, do as it says and all is done.
Congrates! you have successfully rooted the Qtab JB 4.22.
Bricked That Tablet Qtab Q300
lazer220 said:
Dear,
Please follow the instruction to root New Qtab JB 4.22 using Bin4ry method.
1-First you need to enable USB debugging mode in your phone setting > Develpoer Option > enable usb debugging.
2-Download ADB Drivers for all chinese tablets from here http://droidchina.com/forum/Thread-PDAnet-ADB-USB-Driver-For-Windows
its called PdaNetA4126.zip. Install the driver and connec your Qtab to PC through usb when propted. It will install the driver.
3- Now download Root_with_Restore_by_Bin4ry_v32 from http://forum.xda-developers.com/showthread.php?t=1886460 and rclick on runme.bat.
4- Follow the instruction (select option # 1 - New Standard root) and follow the instructions. It will reboot twice, do as it says and all is done.
Congrates! you have successfully rooted the Qtab JB 4.22.
Click to expand...
Click to collapse
Bro can you give me rom for this or a defaul rom of 4.2.2 pls i have bricked it and it is dead
recovery
hey can someone send me original recovery og qtab.. im stuck in recovery loop
didnt work on my qtab q300 . i mean any option.
Qtab Q400
i need lollipop rom for qtab q400
About
I'd like to make this the central thread for Liquid E2 owners to ask questions about how to root the device and for solving problems with rooting this awesome device
The following methods to root your device are for devices running Android versions lower than 4.2.2
Aplication Farmaroot
Download the aplication on this thread and install
follow instructions and voila your device is rooted
Motochopper developed by djrbliss
This is a multi-platform tool to root your device on Windows, linux or mac OS X
It's primarily designed to root the Galaxy 4S but its confirmed to root our Liquid E2 as wel
How to
Step 1
Download motochopper and extract it to your desktop
Step 2
Download and install Acer Liquid E2 drivers if not already installed
Step 3
Enable USB Debugging mode in developer settings (can be enabled by clicking multiple times on Build number in settings> About Phone)
Step 4
Connect your device to your PC via USB.
Step 5
Navigate to the extracted directory and execute "run.bat"
Step 6
Be happy because you've a rooted Liquid E2
Superonclick root tool
This root tool is one of the easiest and safest ways to root your device.
How to
Step 1
Dowload and install Superonclick
Step 2
Enable USB Debugging mode in developer settings (can be enabled by clicking multiple times on Build number in settings> About Phone)
Step 3
Start Superonclick and follow the instructions
Step 4
Be happy because you've a rooted Liquid E2
Note
For liquid e2 users who are running Android version 4.2.2 the above root methods will not work instead use the method described in this thread
How do I get Custom roms on this? really hard to find
CyberTbag said:
How do I get Custom roms on this? really hard to find
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2381298
You need to install Clockworkmod recovery and flash a custom rom
Acer Liquid E2
Blackyx007 said:
About
I'd like to make this the central thread for Liquid E2 owners to ask questions about how to root the device and for solving problems with rooting this awesome device
There are 2 major procedures you can follow to root this device
Motochopper developed by djrbliss
This is a multi-platform tool to root your device on Windows, linux or mac OS X
It's primarily designed to root the Galaxy 4S but its confirmed to root our Liquid E2 as wel
How to
Step 1
Download motochopper and extract it to your desktop
Step 2
Download and install Acer Liquid E2 drivers if not already installed
Step 3
Enable USB Debugging mode in developer settings (can be enabled by clicking multiple times on Build number in settings> About Phone)
Step 4
Connect your device to your PC via USB.
Step 5
Navigate to the extracted directory and execute "run.bat"
Step 6
Be happy because you've a rooted Liquid E2
Superonclick root tool
This root tool is one of the easiest and safest ways to root your device.
How to
Step 1
Dowload and install Superonclick
Step 2
Enable USB Debugging mode in developer settings (can be enabled by clicking multiple times on Build number in settings> About Phone)
Step 3
Start Superonclick and follow the instructions
Step 4
Be happy because you've a rooted Liquid E2
Click to expand...
Click to collapse
Do that Superonclick works for Acer Liquid E2?
pieterandroid said:
Do that Superonclick works for Acer Liquid E2?
Click to expand...
Click to collapse
It's an application to root almost any android device
But I used motochopper and it worked the first time the superoneclick application crashed a few times so I stick with motochopper
Sent from my A116 using xda app-developers app
Root doesnt work
Hi,
i tried both superoneclick and motochopper, but they both didnt work
Acer Liquid E2 Android 4.2.2
EDIT: Fixed, used Framaroot
woutie3000 said:
Hi,
i tried both superoneclick and motochopper, but they both didnt work
Acer Liquid E2 Android 4.2.2
EDIT: Fixed, used Framaroot
Click to expand...
Click to collapse
Framaroot, is that with an application ?
pieterandroid said:
Framaroot, is that with an application ?
Click to expand...
Click to collapse
yes, http://forum.xda-developers.com/showthread.php?t=2130276
worked on my device (4.2.2)
I root my phone with motochopper
after rooting my phone i open superuser and it says: The Superuser binary (su) must be updated. Please choose an installation method. Recovery mode installation is recommended for HTC devices.
i click on Install but then it says: There was an error installing Superuser.
do anyone know a fix?
pieterandroid said:
I root my phone with motochopper
after rooting my phone i open superuser and it says: The Superuser binary (su) must be updated. Please choose an installation method. Recovery mode installation is recommended for HTC devices.
i click on Install but then it says: There was an error installing Superuser.
do anyone know a fix?
Click to expand...
Click to collapse
i ran into the same problem, i deleted superuser and used framaroot to root my device
http://forum.xda-developers.com/showthread.php?t=2130276
woutie3000 said:
i ran into the same problem, i deleted superuser and used framaroot to root my device
http://forum.xda-developers.com/showthread.php?t=2130276
Click to expand...
Click to collapse
THNX!
my phone is now rooted
I have rooted my phone with framaroot,
now i want to reset my phone to the factory settings
can i do this without problems?
Kind Regards
Super one click is an fake software that does not root any phone at all so remove it from op and there is rescue root too that is also fake.
I've used superoneclick root multiple times to root my old galaxy 3 (Apollo) and two other Android devices so it's definitely not fake but I haven't used the newer version to root my liquid e2 so if it doesn't work it doesn't mean that it's fake
I'll remove it if you say it doesn't work
Sent from my LG-V500 using xda app-developers app
so what is the best method to root this phone with the latest firmware?
drdedus said:
so what is the best method to root this phone with the latest firmware?
Click to expand...
Click to collapse
It depends on which Android version you are probably on the latest one so the two first options won't work so try the last one
You can't harm your phone by trying
Sent from my LG-V500 using XDA Free mobile app
I had updated my firmware via OTA to the latest version and there aren't any method for root the device. (farmaroot don't do nothing)
Try the last option kingo root normally does the trick
Sent from my LG-V500 using XDA Free mobile app
Hi there's a manual procedure of rooting for Acer liquid e2?is kingo a safe software? It's the first time I root a device...I would know what I'm doing when I do something of so dangerous...
You can root with:
POOT: This app is a one click root app. No computer needed
Framaroot: Framaroot is a oneclick root app . No computer needed
This is the most popular one!
Z4Root: Z4Root is an oneclick root app . No computer needed
Towelroot: Towelroot is an oneclick root app. No computer needed
Baidu: No information
Vroot: No information
Gingerbreak: This app can root almost all gingerbread devices
Downloads:
Poot - Download the app >>here<<
Framaroot - Download the app inside this XDA Thread - >> CLICK HERE <<
Z4ROOT - Download the app inside this XDA Thread - >> CLICK HERE <<
Towelroot - Download the app inside this XDA Thread - >> CLICK HERE <<
Baidu ROOT - Download the app >> HERE <<
vROOT - Download the app >> HERE <<
Gingerbreak - Download the app inside this XDA Thread - >> CLICK HERE <<
Flash a SU ZIP - Download the ZIP >> HERE << and flash it on your unlocked bootloader phone !
Hit thanks if you liked this post or this post has helped you out !
Hi all,I know some of us here have their own way to root the Lenovo A766 phone by using a Flash Tool.
I have a way which is the most simpliest and easiest way to root the phone.
1. Download Framaroot.
2. Install the downloaded APK file.
3. Choose to install Super User
4. Choose Broomir
5. DONE!
6. Your phone ROOTED!
Download root checker and check it!
• Super SU may asked you to update the app, just update it.
••I DO NOT RESPONSIBLE IF YOUR DEVICE BRICK!
CLICK THANKS BUTTON IF THIS HELP YOU :good::good:
I successfully root my a766.