[ROM][Android 4.4.2][Camera works] CM11 with ION !!!...BUGS...!!! - HTC Sensation

Hi guys,
I'm an android apps developer and I'm facing two problems with [ROM][Android 4.4.2][Camera works] CM11 with ION for HTC Sensation:
1.- GPS NMEA strings are not broadcasted (I cannot get them via NMEAListener). This problem started from CM10.1 back in July. I've already posted in many forums but there was no answer,
2.- WiFi p2p (WiFi direct) is not supported. WiFi p2p is a new usuful feature since android 4.0 and many apps are using it. In this ROM it doesn;t exist at all.
Unfortunately I didn't find any other way to report these bugs than starting this post.
Does anyone knows anything about these issues?
Thanks

I am also facing some problems after flashing this rom on my htc sensation 4g.
my sensation rebooting after 3-4 minutes and the battery life is tooooooooo poooooor.
any solution?

USB-debugging
I must have overlooked something, but I've cycled through all of the menus a couple of times and I can't seem to find the usb-debugging option.
Anyone care to help out?

F0kkie said:
I must have overlooked something, but I've cycled through all of the menus a couple of times and I can't seem to find the usb-debugging option.
Anyone care to help out?
Click to expand...
Click to collapse
Do you find out the developers options ?

Mile_zdr said:
Do you find out the developers options ?
Click to expand...
Click to collapse
That's just it. They're nowhere to be found
I had no trouble locating it when I had CyanogenMod 9.10 installed, but this one seems to miss it (or I am missing something!)

F0kkie said:
That's just it. They're nowhere to be found
I had no trouble locating it when I had CyanogenMod 9.10 installed, but this one seems to miss it (or I am missing something!)
Click to expand...
Click to collapse
Go to about phone and press few times on the build number ( i think 7 times) and after that you ll have developer options

Mile_zdr said:
Go to about phone and press few times on the build number ( i think 7 times) and after that you ll have developer options
Click to expand...
Click to collapse
Sir, they should build you a statue in the town's square
Thanks!!

Hi all,
has someone got these bugs?
- display doesn't seem to go off properly while in call, because it seems that touchscreen continue to detect touches while display is turned off, so you'll find your phone completely messed up at the end.
- in call volume with earphones (without microphones, only earpieces) is always at max, with no chance to reduce it during the call using volume button (even if in the screen you see you are decreasing volume).
- led notification doesn't blink the right color...doesn't blink at all sometimes.
Thanks.

Related

[Q] WidgetLocker wake on volume key not working

Hi there,
my power buttom is about to die, so I'm trying different alternatives to lock/unlock. Widgetlocker should allow to wake on volume key press, but is not. I have activated the "Easy wake" option, but nothing happens. I find strange that it didn't ask for special permissions as other wake apps do.
Im running stock ICS, still unrooted. Already installed tap tap app to wake and screen lock and off. Deactivated both apps to check if they were interfering with WidgetLocker.
Any idea? I'd rather not install any custom rom.
Thanks!
Same problem here...
___________________________
Sent from my HTC Desire S
Here's a crazy idea, why don't you root your phone and install
one of the MANY ROMs with this functionality available
maxlieb said:
Here's a crazy idea, why don't you root your phone and install
one of the MANY ROMs with this functionality available
Click to expand...
Click to collapse
That crazy idea produces a crazy behaviour on my phone: for the last 4 months, using a WIDE range of cooked roms, enabling the 3g connection produces a radio related fatal crash and reboot. Asked in different forums but no answer besides "sent it to HTC", wich I didnt because is out of warranty.
Official ICS release finally solved this. So no plan of going back to hours of research, test and fail.
Pretty crazy, uh?

Wifi not staying connected in sleep mode.

I just wanted to know if anybody has a solution for the problem that Wifi not staying connected in sleep mode. So i get the whatsapp notifications not until i unlock the screen,but then immediately.
Keep the wifi always on during sleep is set.
[APP] 14.6 v2 SmartSync Disabler
I think this is what you are looking for:
http://forum.xda-developers.com/showthread.php?t=1708492
Acutally tried some things right now, but it seems the issue still stays.
Tho i am certain the issue does not appear on random times.
pbelcomp said:
I think this is what you are looking for:
http://forum.xda-developers.com/showthread.php?t=1708492
Click to expand...
Click to collapse
sry but it isn´t.
i try it but i think it´s only to fix the problem with the night mode. my wifi sleeps just after a few seconds when display is locked. some apps like "advanced wifi lock" fix the problem.but my battery... that´s why i ask for another method to solve my issue
schokomilch8 said:
sry but it isn´t.
i try it but i think it´s only to fix the problem with the night mode. my wifi sleeps just after a few seconds when display is locked. some apps like "advanced wifi lock" fix the problem.but my battery... that´s why i ask for another method to solve my issue
Click to expand...
Click to collapse
this is my problem for 2month TOO
i cant find answer and everyone in around say your phone and htc is a bad brand and ...
so i can't answer for which reason this happend
realy big problem for appZ like What's App
I'm just going to try out lowest screen brightness & never turn off screen and after that the advanced wifi lock & etting you know which works better on battery life. Tho im sure advanced wifi lock tops the other method.
I also I have the same problem, I put a link here: http://forum.xda-developers.com/showthread.php?p=34967017 # post34967017 to try to find help, but from what I see, is difficult to solve.
Still seems that advanced wifi lock is best solution right now. When i get 100% charge level i shall try how fast it drains the battery
But the question is why only a few phones have this problem and why a app like advanced wifi lock can fix the problem???????
Mysterious! I tried out different custom roms and radios and the problem was always the same.
Maybe one of the developers of a custom rom can help?
I have a similar issue but its my WiFi hotspot that stops broadcasting signal when screen is off
Only on non sense ROMs
Sent from my HTC One S using xda premium
I have to keep my screen on when tethering, but regular WiFi seems to work.
Sent from my ....

[Discussion][ROM][S4][WIP] CM10.1 on HTC One S

Hey Guys,
as CM10.1 posts are flooding the two CM10 threads I'm opening a new discussion Thread here so that you/we can keep the CM10 Threads for CM10.
Feel free to post videos & screenshots, I will add some of them to the OP if you want me to!
I also would encourage you to tell me what works & what doesn't, please use a proper listing method therefor.
As always all credit goes to intervigil, xkonni & the others behind CM10(.1)!
said/found to be working / not working:
Screen tearing (nearly unnoticeable)
Working: everything else
I'm looking forward to get CM 10.1
Thanks for the 10.1 thread!
So the first question I got the 10.1-20121210-experimental and got no developers and power options Besides the camera and this issue, it works great! Thanks to all developers!
Just tab 7 times on "Build name" to become developer,
gesendet von meinem HTC One S mit Tapatalk
All is allowed to contribute for a better clarity.
Voice search within apps won't work. (Any voice assistant) [Still able to make/recieve calls]
Lag spike once in a while
Screen tearing
No camera applications as all.
BT problem
No audio when connected headphones (From what I hear someone confirm this) a13xemz's quickfix from the playstore Playstore: SoundAbout
Quick setting menu can be a bit restless while downloading apps and trying access it. (Setting vanish and come back)
Hope GPS and Nav will work, hopefully some people can tests this out to make sure. While all of this is being resolved
For those expirencing issues with headphones not working this app/widget fixes the problem. https://play.google.com/store/apps/details?id=com.woodslink.android.wiredheadphoneroutingfix
Sent from my One S using xda app-developers app
I can confirm that the issues mentioned in post 6 cover everything I've noticed so far.
Fyi, I dirty flashed over CM10 and the camera app was present and had the new icon, it just didn't work. I thought it was odd that the new gallery didnt seem to sync to Picasa either (like the current cm10 gallery) because when i used the leaked 4.2 camera, the gallery sync worked great.
a13xemz said:
For those expirencing issues with headphones not working this app/widget fixes the problem. *removed URL, under 10 posts. See original quote*
Sent from my One S using xda app-developers app
Click to expand...
Click to collapse
I can confirm that this workaround fixes (forces) headphone usage.
Also, attached some screenshot goodies for yall
i just did a dirty flash and flash the boot.img, and when it boots its stuck on HTC but then again when i hit the power button off, what it does is off but when i push the power back on, and hit the screen the buttons light up how come?
klutch said:
i just did a dirty flash and flash the boot.img, and when it boots its stuck on HTC but then again when i hit the power button off, what it does is off but when i push the power back on, and hit the screen the buttons light up how come?
Click to expand...
Click to collapse
Because dirty flash is not recommended. Try a full wipe and you will be fine.
well i did that and still the same bro, but now when i went to the previous backed up its looping
klutch said:
well i did that and still the same bro, but now when i went to the previous backed up its looping
Click to expand...
Click to collapse
What version of TWRP do you have? I had the same problem and had to get the latest to properly restore my backup.
el_smurfo said:
What version of TWRP do you have? I had the same problem and had to get the latest to properly restore my backup.
Click to expand...
Click to collapse
TWRP v2.3.1.0
and this is how it stays
well now i guess i have to find a way to take that loop of cM its not passing no matter wat cm10 dates or boot.img
Michael1101 said:
Thanks for the 10.1 thread!
So the first question I got the 10.1-20121210-experimental and got no developers and power options Besides the camera and this issue, it works great! Thanks to all developers!
Click to expand...
Click to collapse
To get developer options, tap the build date 7 or so times.
only issue after fresh install, full wipe
is remapping of hw keys--no issue on other roms
if i chose long press on recent app as voice leaving short press menu
and long press home screen as recent apps--I get voice for any press of recent apps and home key
i can get recent apps to be menu and home stays as home
then no recent apps
hope this is not confusing and mentioned before--did look around
did wipe caches and rebooted
maybe only option is too reflash, but no recent apps is not a big deal as rom runs very smooth and I have my voice turns in GMaps with street names spoken now. street names were not mentioned on other roms for me for a while now--
forget it i found the problem ill wait till the next CM10.1 arrives
klutch said:
forget it i found the problem ill wait till the next CM10.1 arrives
Click to expand...
Click to collapse
how did you fix it klutch

[Q&A] [ROM™ 4.4.4][DUAL] N5 Experience R10.0 - CM11 Based - [7th October]

Q&A for [ROM™ 4.4.4][DUAL] N5 Experience R10.0 - CM11 Based - [7th October]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
systemUI FC loop
flashed this rom yesterday. almost everything was fine till mid night. when i woke up phone was off. turned on the device and found systemUI FC loop. i am tired of this. going back to stock. is there any ROM out there without this any issue which ran at least 1 week. please let me know.
incoming call display problem
i have been using this rom since the begining and its the best available for moto g (xt1033). i have only faced one issue and that is ; upon an incoming call, the phone rings and vibrates as it should timely, but the display remains black for around 8-10 seconds and then the contact info pops up. i have tried multiple setting changes but the problem is still there. hope any body knows the answer to it.
sim not detected
it is unable to detect sim on my moto g dual (xt1033)
sandysan said:
flashed this rom yesterday. almost everything was fine till mid night. when i woke up phone was off. turned on the device and found systemUI FC loop. i am tired of this. going back to stock. is there any ROM out there without this any issue which ran at least 1 week. please let me know.
Click to expand...
Click to collapse
you need to flash aosp kernel without d2w after this rom and your problem will be gone
Pocket Mode not fully working?
Does anyone else have a problem where pocket mode doesn't turn off the screen when put back in pocket?
latest built 10.3 have any issue? xt1033
Juwelrana said:
latest built 10.3 have any issue? xt1033
Click to expand...
Click to collapse
Make a backup of your current ROM. Try. And if something going bad, return with the backup. [emoji41]
I'm going to install this version on multirom.
I think 10.3 don't have good battery backup..if they include battery saver mode it will be great.
Incoming call not displayed
Installed and found this issue.
the erased everything and installed fresh just to see that the problem persists on a fresh install as well.
I like the ROM and have found a usable solution to keep it but would prefer to have it working as it should.
I read a lot that this is a common problem on Original Nexus 5 phones, so maybe it is ported together with the ROM.
When screen is on and incoming call is made the melody is playing, phone is vibrating (if set to do so) and in the notification bar is a notice of incoming call. if pulled down there is an option to answer or deny the call in the notification drawer.
When screen is off and incoming call is made after ca 1-2 seconds of melody playing dialer screen appears with number or contact name and option to answer or decline the call. As it normally should be.
After trying many setting changes the closest to usable solution i have come is to enable Heads Up.
If you want to try that you need to follow this route: Setings > Notification Drawer > Heads Up. I set it to ON and it shows incoming call in a pop up when the screen is on. when the screen is OFF the incoming call appears as normal.
my phone is moto g 16gb with dual sim.
---------- Post added at 09:50 AM ---------- Previous post was at 09:44 AM ----------
And another issue that i have come across in a fresh install is that Android File transfer on my macbook does not detect my Moto G when Developer options and Android debuggin (in developer options) is set to off.
Even the phone displays a notification that it is connected as a media device and in usb connectin settings i can switch between media device and camera. When i selct camera mode my mac detects the phone and opens camera/gallery window. as soon i change that to media device it disconnects
With stock rom it connected every time i plugged it in.
Am i missing somethin or is there a bug or that is the way it should be in this ROM ??
What exactly does the iPhone 5 and Halfbreed color profile? Because I don't see any differences in colors, when enabling one of them
Sent from xt1032 / Odoslané z xt1032
2hipso said:
What exactly does the iPhone 5 and Halfbreed color profile? Because I don't see any differences in colors, when enabling one of them
Sent from xt1032 / Odoslané z xt1032
Click to expand...
Click to collapse
I have same conditions.
Awesome work!
lock screen freezes! what should i do??
Smooth and stable!A
Good ROM! Any possibilty for OTA? =D
thx
I just quiet this rom because of battery drain so fast....and nxcm 10 version never freeze when play video then press volume button but latest version I got this issue.
xt1033
i like this rom so much but, in every notification is coming my lockscreen always freezed. i was flashed use TWRP and do instruction installation well. with other rom i didn't have problem like this.please give some solustion.thx
magnusy6 said:
lock screen freezes! what should i do??
Click to expand...
Click to collapse
flash this kernel, bro
http://corte.us/457636
!! but you will loose double-tap to wake (also known as D2W or DT2W) and swype to wake (S2W) features
link source: http://n5x.mobi/motog
The pocket mode problem persists. It detects fine when the phone is taken out of the pocket but when put back the screen remains as it is. Anyway this ROM is the beat for motog ,so I can work with the faulty pocket mode.
Dark theme like aosp
Hello,
I love dark themes. Any chance to add the dark theme in your build as aosp roms on this rom. I would not change this rom but I would like to have the option to change it to black theme, or do you know of any other alternative?
Thank you

Android Auto issues on Poco F1 Custom Roms

On all custom Roms I've tried so far (and they've been a few), there's an ongoing problem while using Android Auto connected to the car's built-in display. Basically, if you plug in your phone and start using AA, after a while the bottom bar on the car's display will disappear, and although you can keep driving and AA will keep working, once you stop and unplug the phone from the car, the phone will lock you out and it's screen will start to flicker and go crazy, giving you no other option but to force reboot the phone.
This issue was present on MIUI Oreo roms as well, but since they updated to Pie last month, it was addressed and a fix was found (seems it was related to the devices default display drivers). For custom Roms, there's a temporary workaround, which is to disable hardware overlays in developer settings, but you need to do this every time you reboot your phone since these settings don't stick permanently.
I've posted and mentioned this issue on several different custom ROM threads, but as far as I know, none of the devs has acknowledged the issue nor has tried to find a solution. So, the question is; how many of you have the same problem?
Please provide your feedback, as it would be good to let the devs know this is not unimportant or isolated.
krilok said:
On all custom Roms I've tried so far (and they've been a few), there's an ongoing problem while using Android Auto connected to the car's built-in display. Basically, if you plug in your phone and start using AA, after a while the bottom bar on the car's display will disappear, and although you can keep driving and AA will keep working, once you stop and unplug the phone from the car, the phone will lock you out and it's screen will start to flicker and go crazy, giving you no other option but to force reboot the phone.
This issue was present on MIUI Oreo roms as well, but since they updated to Pie last month, it was addressed and a fix was found (seems it was related to the devices default display drivers). For custom Roms, there's a temporary workaround, which is to disable hardware overlays in developer settings, but you need to do this every time you reboot your phone since these settings don't stick permanently.
I've posted and mentioned this issue on several different custom ROM threads, but as far as I know, none of the devs has acknowledged the issue nor has tried to find a solution. So, the question is; how many of you have the same problem?
Please provide your feedback, as it would be good to let the devs know this is not unimportant or isolated.
Click to expand...
Click to collapse
On which MIUI Version are you having that problem?
Which car display with which software version are you using?
For me with MIUI 8.12.27 weekly EU version and Skoda Bolero display I'm not having the issue you describe.
MikelFuchs said:
On which MIUI Version are you having that problem?
Which car display with which software version are you using?
For me with MIUI 8.12.27 weekly EU version and Skoda Bolero display I'm not having the issue you describe.
Click to expand...
Click to collapse
Please read the title: on custom roms, not miui...
You wrote on Oreo stock ROM it was present to.
oiseau1201 said:
You wrote on Oreo stock ROM it was present to.
Click to expand...
Click to collapse
Yes, and it was (plenty of comments on MIUI forums and over the net, if you want to take a look...) They fixed it on Pie, and if you're still running Oreo and don't have issues, then I guess they fixed it there, too.
This poll, topic and thread is for the issues still affecting Aosp based custom roms, such as Crdroid, PE, Lineage, etc.
Even I would like to know the result of this poll. I am on the verge of trying out a custom ROM (since i am done with the bugs in MIUI). But if AA doesn't work on custom ROM, it is a showstopper for me.
Hi,
I have a different issue with Android Auto.
My problem is that when I connect to Android Auto, after a couple of minutes (1-2, 2-3 minutes) the screen on the car's display seems to be stuck, and from then on it doesn't follow my progress on the way. The screen itself is not frozen, because e.g. I can make a reroute but after it is done it goes back to the "original" state of my route when it stopped progressing. The screen remains responsive regarding the controls because I can even change to Google Maps on the car's AA display, and it works flawlessly.
Anyone else had this issue?
I'm using xiaomi.eu rom 9.1.17 beta
aghilvr said:
Even I would like to know the result of this poll. I am on the verge of trying out a custom ROM (since i am done with the bugs in MIUI). But if AA doesn't work on custom ROM, it is a showstopper for me.
Click to expand...
Click to collapse
I'm currently on Crdroid, and in my opinion it's the one that works best. As for the AA issue, it's present on all custom roms, but for the time being, I'm using the workaround I mentioned on OP and can use AA fully.
rn74 said:
Hi,
I have a different issue with Android Auto.
My problem is that when I connect to Android Auto, after a couple of minutes (1-2, 2-3 minutes) the screen on the car's display seems to be stuck, and from then on it doesn't follow my progress on the way. The screen itself is not frozen, because e.g. I can make a reroute but after it is done it goes back to the "original" state of my route when it stopped progressing. The screen remains responsive regarding the controls because I can even change to Google Maps on the car's AA display, and it works flawlessly.
Anyone else had this issue?
I'm using xiaomi.eu rom 9.1.17 beta
Click to expand...
Click to collapse
Strange, I tried an EU rom about a couple of weeks ago for a few days and AA worked out of the box. Didn't like the MIUI stuff, though, so reverted back to Crdroid.
I however remember I flashed the full MIUI rom completely, wiping everything and starting from scratch, so if you want to stick with MIUI, maybe you should do a fresh install...
krilok said:
Strange, I tried an EU rom about a couple of weeks ago for a few days and AA worked out of the box. Didn't like the MIUI stuff, though, so reverted back to Crdroid.
I however remember I flashed the full MIUI rom completely, wiping everything and starting from scratch, so if you want to stick with MIUI, maybe you should do a fresh install...
Click to expand...
Click to collapse
Edit: just noticed. Are you using Waze for navigation? If you are, there's an ongoing location issue with the app running on MIUI...
Having the same issue running PIxelExperience and it's driving me nuts.
krilok said:
, there's a temporary workaround, which is to disable hardware overlays in developer settings, but you need to do this every time you reboot your phone since these settings don't stick permanently.
Click to expand...
Click to collapse
I did not know that, thanks for the tip .
Update: you can automate disabling the hardware overlays using Tasker and the Secure Settings plugin
bob*nwk said:
Having the same issue running PIxelExperience and it's driving me nuts.
I did not know that, thanks for the tip .
Update: you can automate disabling the hardware overlays using Tasker and the Secure Settings plugin
Click to expand...
Click to collapse
Thanks, I had read you could use tasker for that, but it's a paid app and I wouldn't be using it for anything else at the moment. I'm fine with remembering to disable it manually. Still, I believe the issue has to be addressed at some point by the devs...
One General question:
The only thing keeping me away from custom roms is the AA issue. Nice to hear that at least we have a workaround.
At the moment i am on MIUI Android pie and using a VW in build AA Display. The issue i'm having is that WhatsApp notifications are not shown on the Display. I can send WhatsApp Messages via Ok Google but not able to hear received messages.
Do you guys have the same issue?
gella1992 said:
One General question:
The only thing keeping me away from custom roms is the AA issue. Nice to hear that at least we have a workaround.
At the moment i am on MIUI Android pie and using a VW in build AA Display. The issue i'm having is that WhatsApp notifications are not shown on the Display. I can send WhatsApp Messages via Ok Google but not able to hear received messages.
Do you guys have the same issue?
Click to expand...
Click to collapse
Wouldn't be able to confirm that, although I did read somewhere that if you're using any Dual apps on MIUI, AA won't work correctly. Are you using two WhatsApp accounts by any chance...?
I can tell you though that on the current rom I'm using (crdroid), they do work and appear on the cars screen, although most of the time there's no notification ringtone whenever they arrive. Since that was happening on my previous phones too, be it on nougat, oreo and pie, I guess that's a problem with AA itself...
Thanks for your quick reply.
Happy to hear that it is generally working.
Not using dual Apps. Will try to flash a custom Rom in the next days
krilok said:
Thanks, I had read you could use tasker for that, but it's a paid app and I wouldn't be using it for anything else at the moment. I'm fine with remembering to disable it manually. Still, I believe the issue has to be addressed at some point by the devs...
Click to expand...
Click to collapse
If you buy it, I guarantee you will be using it for a lot more than just that...
papete said:
If you buy it, I guarantee you will be using it for a lot more than just that...
Click to expand...
Click to collapse
I can confirm this. Best $5,- I spent on an app ever.
papete said:
If you buy it, I guarantee you will be using it for a lot more than just that...
Click to expand...
Click to collapse
I understand and appreciate the recommendation, but I've already got Macrodroid for other automation functions...
I don't get the menu on the bottom visible with disabling HW Overlay, tested Nitrogen,CRdroid, Liquid Remix,LOS
using: beryllium-9.1.24-9.0-vendor-firmware
mf76130 said:
I don't get the menu on the bottom visible with disabling HW Overlay, tested Nitrogen,CRdroid, Liquid Remix,LOS
using: beryllium-9.1.24-9.0-vendor-firmware
Click to expand...
Click to collapse
Works for me and others as well, although someone did mention on another thread he couldn't get this workaround to work either...
This is my setup:
USB debugging on and hardware overlays disabled.
In AA developer options, enable 720, 1080, unknown sources.
If it still won't work, then Im guessing it could maybe be due to different screen panels or something...

Categories

Resources