i had this tablet and after trying to recover it with phoenix card i bricked it, it just doesnt turn on any more
the tablet is an irulu al101, aka flytouch 8 and many more
it has a a10 processor, model number is BC1003, it has android 4.0.,3
ive tried with different software like phoenix card wich seem to be fine but after doing the process on the tablet its still dead, ive also tried with livesuit but in this case the pc doesnt recognize it
Did you try turning it on and off again?
epicboy said:
Did you try turning it on and off again?
Click to expand...
Click to collapse
i did it doesnt turn on any more, not even with the charger connected i cant use any software that involves connect it to the pc either because it doesnt detect it, i dont think its the battery because i had it pluged in for a while before this happened
Have you tried to restore stock firmware from download mode. Using software like odin?
i was using phoenix card thats the software name, now its working again i was using the wrong firmware but i found the right one and its working fine, thanks for your help epicboy
Related
Hey guys,
Recently I have encountered a problem with my Captivate. When I connect it to my PC in download mode, I am notified that the device is not recognized. Thus, Odin doesn't see it.
I searched the forums and found instances of people with similar issues, but there isn't any real standard way to fix this.
So as it stands, I have a 2.3.3 Rom on my phone, with the updated bootloaders, and no way to get back to stock so I can trade it in on the warranty.
I am convinced that this is an issue with the phone itself, as I have tried connecting to Odin while in Download Mode on two separate computers, I have tried with two separate usb cables, I have tried uninstalling and reinstalling the drivers a few times, I don't have KIES installed, I have tried different versions of the drivers, I have tried with USB debugging on and off, and so on. So clearly, through all of this, it would seem that there is an issue with the phone's USB port.
So the question is, is there any way to restore to the stock 2.1 or 2.2 roms without using Odin (bearing in mind that there are 2.3.3 bootloaders present) or am I pretty much screwed? The idea is to get a warranty replacement on account of the USB issue.
Also, for what it is worth, I am still able to mount the SD cards while the phone is on, this only occurs in Download Mode.
Thanks!
Give the I9000 drivers a shot ... Couldn't hurt...
What rom. Were u running u may need the nexus s drivers
Sent from my GT-I9000 using XDA Premium App
I tried using the i9000 drivers and I am getting the same exact problem. :/
Also, I am running Continuum 5.1.
Try Starting odin plugging the phone into the pc off, and then using the power and volume down buttons to enter download mode. Worked for me.
I have seen it in other places that if your micro sd card has a lot of space used the function can time out before the phone is recognised. It has been recommended to remove your sd card before you start the process.
tking0036 said:
Try Starting odin plugging the phone into the pc off, and then using the power and volume down buttons to enter download mode. Worked for me.
Click to expand...
Click to collapse
Thank you! This seems to have worked!
clemmie said:
I have seen it in other places that if your micro sd card has a lot of space used the function can time out before the phone is recognised. It has been recommended to remove your sd card before you start the process.
Click to expand...
Click to collapse
Thank you, I will remember this for the future.
Hello,
I have bricked my tablet Onda Vi10 Deluxe, I have flashed the tablet with a wrong image to ainol, and now, my tablet switch on, but don't work the touch. If I connect to pc, the tablet recognize the usb but I dont touch anything. What can I do ?
Can I switch on with recovery or similar anything to reflash it ?
Thanks very much.
trempi said:
Hello,
I have bricked my tablet Onda Vi10 Deluxe, I have flashed the tablet with a wrong image to ainol, and now, my tablet switch on, but don't work the touch. If I connect to pc, the tablet recognize the usb but I dont touch anything. What can I do ?
Can I switch on with recovery or similar anything to reflash it ?
Thanks very much.
Click to expand...
Click to collapse
I have tried to install a ClockWork Recovery but the pc need the tablet with enabled debbuging usb and I suppose that it's unable and I can't touch anything ....
Please ...... help me please.
trempi said:
I have tried to install a ClockWork Recovery but the pc need the tablet with enabled debbuging usb and I suppose that it's unable and I can't touch anything ....
Please ...... help me please.
Click to expand...
Click to collapse
Hey ..... I don't believe it !!!! I have flashed another time and now it has worked fine. The tablet switches on perfectly and can work with it. I have tried with same program (LiveSuitPack_v1.07.exe), same rom, same pc, all same and now it worked good.
I DON'T BELIEVE IT !!!!
I'm having a similar problem. I installed Busybox and caused the thing where it constantly resets to chinese. I have had no success at all in getting the LiveSuitPack_107 to reflash it. It hangs after 3% copied every single time. I don't think it is actually doing anything since I can still turn it on. You're sure there was nothing special to get the LiveSuit to actually work?
Can I ask, what base OS are you running the LiveSuit from? WinXP? 7? 64 or 32 bit?
trempi said:
Hello,
I have bricked my tablet Onda Vi10 Deluxe, I have flashed the tablet with a wrong image to ainol, and now, my tablet switch on, but don't work the touch. If I connect to pc, the tablet recognize the usb but I dont touch anything. What can I do ?
Can I switch on with recovery or similar anything to reflash it ?
Thanks very much.
Click to expand...
Click to collapse
bricked =bootloader problem not your case but it seems you have a hardware failure maybe you have to replace touchscreen but firstly tell me what image tried to flash
an idea :try to enter recovery mode from buttons then check if touchscreen is responsive
if not touchscreen needs replacement
There are offical rom in their site, you can download the rom,and flash it again.
Hi Guys,
I have my friends i9003 with me. Its having a weird problems :
1) It successfully boots after 5-6 tries, but eventually hangs after a min on home screen.
2) Its unable to enter recovery mode.
3) It can enter download mode, but its not detectable by odin/PC. As soon as i connect to PC, it shows usb device not recognized. I have tried 2-3 different pc's, uninstalled/reinstalled kies/samsung drivers etc. On the same pc my SGS1 & SGS2 can connect without any problems. So i guess the problem is with i9003. (So i cant flash anything on it)
4) And the last but not the least.....it cannot be charger (tried pc usb / charger). But the battery seems ok, as i can charge it using other phones and dock charger.
..........any help and advice will be really appreciated.
have u tried the hard reset button at the back between the camera and speaker.
I've a I9003L with the same problem (it's carrier locked), I think it has no recovery at all !
Maybe flashing CWM
pratik_s said:
have u tried the hard reset button at the back between the camera and speaker.
Click to expand...
Click to collapse
Its use to get into download mode right !!! But i can easily get into download mode without doing it. The problem here is pc/odin does not detect it.
nipip said:
I've a I9003L with the same problem (it's carrier locked), I think it has no recovery at all !
Maybe flashing CWM
Click to expand...
Click to collapse
Not in my case, its unbranded, from middle east !
It might be a faulty cable. Did you try another cable?
if ur mobile is starting then try using mobile odin if not try flashing by heimdall software and which version of odin u r trying to use.use the latest
Hetalk said:
It might be a faulty cable. Did you try another cable?
Click to expand...
Click to collapse
4 cables, 6 different pc's, tried all usb drivers. (my Sgs2 works fine on all pc with all cables )
kazi_rizwan said:
4 cables, 6 different pc's, tried all usb drivers. (my Sgs2 works fine on all pc with all cables )
Click to expand...
Click to collapse
Just wanted to make sure you didn't have a problem as obvious as I had. I had similar issue when i tried my micromax cable with this phone.
Well, you'll need some expert's advice now.
Looks liek i found the problem, its same as many i9003's are having. Internal memory card corrupted !!! Have found some risky solutions, but will try them, cuz the phone is already out of guarantee !
i had also faced the same problem but i was unable to do it with that solution u can refer my thread http://forum.xda-developers.com/showthread.php?t=1735718 and i have given my mobile to the service centre for replacing motherboard
I have a TF101 SN60 - SBK1. I was trying today to root it to instal a stupid USB modem app and i bricked it.
Right now it is in recovery mode and i can`t get it out. Tried all the combination of the buttons and still doesn`t work.
I tried to reput the stock rom from Asus and i had success(2 times) but was still in recovery mode and after that i tried once more and it failled.. now i have 7 " !!!!! phone update failled !!!!" and i am very pissed and mad as i do not know what to do no more. I wasted 5 hours today trying to do something to it but i can`t no more. Please help me with some tips or maybe help me put it back to it`s normal state. Thank you.
Which recovery and version do you have installed, and how did you install it?
almost same issue
I have cwm 6 something and it wont recognize the sd or paths my laptop wont detect it have every method downloaded nothing what can i do about this?? Bricked for a long time !!
sriv2102 said:
I have cwm 6 something and it wont recognize the sd or paths my laptop wont detect it have every method downloaded nothing what can i do about this?? Bricked for a long time !!
Click to expand...
Click to collapse
Have you tried APX mode?
I would try another PC, or get a new charging cable. It is possible for the USB cable to charge but not work for USB. Happened to me.
Hi everyone,
I have currently some big issue with my GT-N8010.
My custom rom wasn't running very well so I decided to reset my tablet and go back to a new fresh installation.
I downloaded the latest firmware of the tablet on sammobile and started to update it with Odin PC, but in the middle of the transfert I got an error and now my tablet is stuck on the "Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again.".
I have no idea how to fix it! And I can't go back to download mode anymore. On top of that, my tablet seems not to be recognize by my computer (I tried to install Kies and the samsung usb driver several times but it keeps saying that's the driver is not ok)...
Can someone help me please ?
Thank you in advance!
What custom rom did you had ? 4.4.2 or 4.1.2 ?
KoRoZIV said:
What custom rom did you had ? 4.4.2 or 4.1.2 ?
Click to expand...
Click to collapse
It was a 4.1.2 (HD Revolution) and I tried to flash with odin the N8010XXUCMK2_N8010XSACNA2_XSA
First uninstall kies and all usb drivers. Restart your computer.
If you can get in download mode (power+volume down then volume up when asked) :
Install some drivers from the sticky topics here on xda. Download the firmware again from another location if possible. Use a different usb port.
If you can't get in download mode, you have to try with kies. I never had success whit it, and i really need it. But it says that n8010 does not support initializing or something like that. Maybe someone else can help with kies.
Sent from my GT-N8010 using Tapatalk
I don't know where it comes from...
I tried everything, uninstall/reinstall Kies/Usb driver, put a VM with Win7 (As I am under Windows 8.1), put Win7 in dual boot to maybe fix the compatibility issue but nothing seems to work! And of course I don't have any other computer to use...
That's maybe the reason the tablet get broken as I used to use Odin on another PC and I didn't check if the usb driver was installed on this one??
I just know that Odin recognized my tablet so I was able to launch the installation of the new firmware.
I feel really bad...Hope the tablet is not definitly dead!
Faulty USB cable perhaps ?
Sent from my GT-N8010 using Tapatalk
Ok so I went to a Samsung store and they told me that I have to send my tablet to the repair center in the country where I bought the device.
It's a big issue for me as I am now living in Australia and my tablet has been bought in France.
On top of that the guy from Samsung explained me that now it's normal if my tablet is not any longer recognize by my computer...
I heard about JTAG, I don't have any idea about the subject but may it fix my problem?
Does someone know how samsung is able to fix the tablet, so I may fix it myself instead of sending to them...?