Hello
A strange thing happen (maybe since the beginning ?) on the shield's screen but to reproduce it , it's not easy...
This thing is a vertical black line on the left side of the screen that appears one second and disappear...i can often reproduce it with a dark background and by scroll down and up the 'tool bar' (where there are the clock, wifi, battery...)
Really strange...
Bye !
Update : I do not reproduce the problem today...
Related
Is anyone having display issues with the bottom 3 pixel rows?
It's not entirely annoying.
The whole display is shifted up 3 pixels. (not the physical display)
The 3 rows of pixels on the bottom stretch out the image.
You can see what I mean if you use the ChargerBar application.
By sending the bar to the bottom 1px in height, the bar is stretched out by 3px.
Then send the bar up to the top and it disappears.
You would have to increase the height of the bar by 3px.
I want to show a video. But I don't have a camera...
Here's a video of the issue.
http://youtu.be/ROfYY0wUHzg
porksoda02 said:
Here's a video of the issue.
http://youtu.be/ROfYY0wUHzg
Click to expand...
Click to collapse
I see it too... running cm7. Something needs to be done to the display, just change the number a little. If linuxbozo was here he could easily but i have no idea how sorry. Just try to ignore it, thats what i do. It is hardly noticible.
I see it on mine running emancipation....
Sent from my SAMSUNG-SGH-I997 using XDA
Its normal, noticed it as well.
I think its two pixels, not 3
What's strange is that when I reboot the device it's normal, the way it should look on the bottom. Once I turn off the screen for the first time and then turn it back on, this issue happens, and it stays until the device is rebooted again.
Just noticed this issue this morning..after I tap or press on my display in the center upper prtion of my screen, I get grey blotches remaining... I baby this thing so I was wondering what could cause this issue.... I have sent my 700T in as RMA and hope that it can be fixed... see piks attached for further clarification.. and as you can see in one pik..the mode image after I changed the Performance mode remained static too..
So has anyone else seen this and if so what causes it..defect on screen???
Thank you
Hello,
Im having a strange issue after the 5.1 update on my nexus 5. If I unlock the screen and click on an app, the screen does a weird refresh. After having a close look it almost looks like the home screen is moving down and the app i have clicked on is moving over it. A bit hard to explain and it is cosmetic but looks very ugly.
On occasion when i have received a whatsapp notification, and i double click on the notification from the lock sreen, enter my pattern, the screen will go black and think about what it is trying to do for a second, whatapp will not be displayed and the homescreen will be displayed instead, where as before this procedure would take me to the whatsapp message screen
Wondering if anyone else has experienced this issue ? any fix ? Many thanks
Hello, I've been having a lot of trouble finding a rom that would work perfectly but where many issues were resolved by switching back to KitKat, one issue still remains. There's a faint horizontal stripe of green pixels visible on dark backgrounds and is maybe 1-2 pixels thick. Sometimes if flashes, sometimes it goes away as soon as I touch the screen and most of the time it's not present at all. Also, it does not appear at the same position each time. I cannot find the source of that and I've disabled HW overlay to see if it helps but it does not. Any ideas what could the cause be? In the attachment you can see the stripe on the lower part of the screen.
This is a very strange behavior.
After yesterday working under the rain (and the phone got wet, but its not the first time) I cant do any gesture on bottom because there is no tactile response. Showing back the classic buttons doesnt work.
So I changed to different firmwares and roms and the problem persists.
Also did a factory reset through fastboot with no sucess.
So at this point I could think its a hardware problem (why? If almost full screen is working well but not the f***king navbar)
Trying a TEST APP to see which part of screen works or not, effectively bottom part doesnt work (about 6millimeters)
If I flip the screen to inverted portrait, the navbar works (but cant pull down the notification panel)
AND, THE STRANGEST BEHAVIOR ABOUT THIS:
If I pull down the notification panel, THEN the navbar works while panel is pulled down (altough its not all the responsive it must be)
So I post this to have some help or to ear similar behavior on yours.
And if somebody has technical knowns and explain if is possible this behavior in a tactile panel.
I think maybe when you pull down notifications panel, the navbar input layer moves up a little bit, enough to place in a screen zone with working touch interface.
So yes, the panel has broken maybe due to humidity/water.
The strange thing is that only a 2% of screen was affected.
I only have one thing left to do: replace the whole panel. It shall to fix it.
Update: Today is working well sometimes. Maybe is getting dry?...
Even if you have to replace the screen, it's not that big of a deal. A replacement for our mix 2s is about $35, which is much cheaper than other brands. I replaced mine myself.
Hi, i have exactly the same problem.
My screen is fine and not wet.
Is there any solution dir this?
Thanks
TommyUE said:
Hi, i have exactly the same problem.
My screen is fine and not wet.
Is there any solution dir this?
Thanks
Click to expand...
Click to collapse
No. My solution until a new display arrived was to use any edge gestures to replace HOME, RECENTS and PULL NOTIFICATIONS PANEL (from left and right edges wich was working).
So you will have to replace the display (about 50€ in AliExpress with full frame)