Ive got a lg g2x it has been flashed with different rom. but I put the factory rom back on it. But the baseband is wrong it just clicks when making calls. I fixed it before but now cant remember how to install the baseband. I have the one I need on my sd card just don't remember how to install or load it. Any help is appreciated.
Still no luck ive been searching all day. When I try to install from the sd card in CWM. After rebooting the back light for the screen just flashes and the phone doesn't load. Please help my Galaxy is busted need to switch phones
You don't need to install a baseband. Just the baseband fix. Search in the forums for baseband fix and flash the right one.
Sent from my LG-P999 using xda premium
Thanks for the advise. Searching baseband fix brings up stuff that I have read all day. Is flashing a baseband different than installing from sd card in CWM? Sorry noob here. Might be reading what I need some where and just not understanding it. How do you flash the baseband? I know the baseband file on my sd is correct because I had the phone working before.
I honestly dont know how to updgrade/downgrade a baseband. But I'm pretty sure it's not as simple as flashing it. Like I said all you need is the baseband FIX for your phone to start working again.
http://forum.xda-developers.com/showthread.php?t=1776843 Here's the sticky that's in the G2X General forum.
If you're on the new baseband and having popping issues then you need to flash the first download link in CWM. If you're on the old baseband and having popping/clicking issues when calling then flash the third download link in CWM.
Thanks again I have read that sticky. I did see where someone wrote that flashing is the same as a rom. When I go it that way It wont reboot. still searching and trying different things
Tried using the links from sticky. When I try to reboot after installing from sd in CWM. It flashes the LG logo then nothing. Screen just lights up goes dark then lights up over and over. Not sure if Im just not doing it in the right order or what. Can anyone help me with the actual flashing process or explain why it wont reboot
are you rooted?
Pain-N-Panic said:
are you rooted?
Click to expand...
Click to collapse
I believe so. Like I said im a noob. I don't do a lot with phones but normally can figure stuff out through forums. Phone is on android 2.3.3 right now. Kernal 2.6.32.9 build GRI40 software version lg p999 v20c. Not sure if any of that helps. Thank you for continuing to reply still hoping someone can be like hey your doing this ------ wrong
You have CWM recovery installed.....did you install it via NvFlash (the correct way) or was it done through the Rom Manager app (the WRONG way)?
First, I would like to know if you are rooted. Do you have the super user or SU app on your phone? You can open up a terminal emulator and type in SU and find out that way also. If it's not rooted, report back and I will give you a zip file that you can flash to easily root the device. Next, I would upgrade the baseband to 2.3.4 with the LG updater tool.
CWM was on the phone when I got it. So not sure how it was installed. I do have the super user app. How can you tell if its rooted? The phone had been messed with before I got it. That's how the baseband got messed up. I found how to fix it on here the first time. But now I cant find the same page/thread.
http://forum.xda-developers.com/showthread.php?t=1037120
This may help
I tried the firmware it aborted install like others were talking about it doing.
I also tried the LGMobile support tool and cant get it to work. Getting really irritated that I cant figure this out.
I fixed it before and now I cant. Would be really nice if it would just reboot with the baseband. But no it gets stuck in a boot loop.
Thanks for all your help Pain-N-Panic kinda surprised no one else has chimed in
Have you tried doing a COMPLETE wipe of the device and re-flashing a ROM?
Complete wipe = data factory reset, wipe cache, wipe dalvik cache, format /system under the "mounts and storage" tab in CWM
I have done all that except formatting the system but just tried it and it still gets stuck in boot loop when I try to install the baseband file.
I should have bookmarked the page last time I know it wasn't this hard
The joys of noobhood
What is this baseband file you speak of?
Stop flashing that. It's not working. Do a complete wipe and Flash a working rom like vanilla cm7. Come back here and report.
If your phone can't flash a ROM and you get stuck in a boot loop I would reflash CWM with NVFLASH. Look around for NVFLASH in the stickies and you'll find it. Do you have an SD card? If so, make sure you choose the version of CWM that has SD card support within the NVFLASH user interface. Follow the instructions in the NVFLASH thread to the T in order to install it on your phoen. My advice:
1.) Download vanilla CM7 from get.cm and cm7 gapps package to SD CARD
2.) Reflash CWM to phone via NVFLASH software
3.) Flash CM7 and gapps from SD card through your newly installed recovery
4.) Reevaluate where your phone stands
Super one click says my phone is rooted.
Ive tried a few baseband files from here http://forum.xda-developers.com/showthread.php?t=1680292&highlight=baseband+install.
And the one I used before that fixed it don't remember where I got that one. I can flash roms fine.
Get stuck in boot loop when I install the baseband.
The NVflash's that I found are for different devices. Would that matter? I also cant get the get.cm/app to install on the phone
I may just be having a Id10t .problem here.
I have super one click and odin. No NVflash no CM/app and no KDZ pogram that the above link talks about.
However I did this before was with CWM,SOC or odin
Which phone do you have?
As the story says, a kiss turned my G2X into an HTC Ruby!
Its a LG-P999DW
Pretty sure Odin is for Samsung devices only...it has no use for our LG G2X. If you can flash ROMs fine then your recovery is working properly. Have you tried using the official LG updater tool to upgrade baseband?
---------- Post added at 02:27 AM ---------- Previous post was at 02:21 AM ----------
http://tool.xcdn.gdms.lge.com/client/app/B2CAppSetup.exe <--- Link to LG updater tool. Make sure you have the proper drivers installed.
All the directions can be found here --> http://www.lg.com/us/support/product-help/CT10000003-CT10000027-1379696343202
Related
Hi, new Android user here.
I was trying to root my Nexus S phone yesterday and I'm having problems. There is a lot of rooting guides out there and I used one from xda and also one from unlockr.com. Managed to root the phone ok (I think), but everytime I flash a custom ROM, the phone won't start at all, it just sits at the boot up screen and repeats itself.
So I'm thinking, I should just start over again. So I flash the stock ROM from xda back to 2.3.1. Everything seems ok, the phone starts up... but it's always stuck on airplane mode and the phone itself doesn't even show stuff like IMEI, mac address anymore.
So now I figure I've probably messed the phone up enough and need help lol. How do I go about reflashing the stock ROM and getting my Nexus back to out of the box condition (Stock ROM and no custom bootloader)?? Any guides or step by step instructions would be very helpful.
Thanks
Did you wipe before flashing roms?
Sent from my Nexus S c",)
Maybe flashing the KB2 modem would help that but the 9020a came stock with 2.3.3 and not 2.3.1 so that could be it...I'm not sure but that software wasn't meant at all for ours so it could be part of the problem. But if I was you I'd take a look at this thread wich has all the stock software for your phone. Make sure you wipe everything in clockework and then flash the stock rom. http://forum.xda-developers.com/showpost.php?p=13123996&postcount=39
dsixda uploaded the stock backup and the stock recovery, you can read more at that link, good luck hope it helps
You can download the full stock ROM from the link below:
http://goo.gl/8P8vl
Move the zip file to sdcard. Boot into recovery and flash the ROM. It should get you back to stock 2.3.4 ROM, all locked.
jungbum said:
You can download the full stock ROM from the link below:
Move the zip file to sdcard. Boot into recovery and flash the ROM. It should get you back to stock 2.3.4 ROM, all locked.
Click to expand...
Click to collapse
that did the trick. thanks everyone, now time to try rooting and flashing ROM again!
hrm lol now trying to update it to 2.3.4, it downloaded the update, but on reboot i get the white triangle with ! in it :\
this phone is so messed now
edit: well now everything is ok again, wiped data, flashed with CM7 and now it says 2.3.4, go figure.
I soft bricked my phone playing with ICS, I got a JIG and solved the problem
I can now ODIN back to any version and once rooted I can install any samsung based rom, the problem comes when I try to flash aosp both CM7 and any ICS beta
What happens is I select the zip, it runs a script and the phone reboots, I see the AT&T logo and then it mounts the sd card, it says it can't find the zip file.
I've tried Froyo, Eclair, even gingerbread (I know your not supposed to flash cm7 from gingerbread, I'm just running outta ideas) I have froyo bootloaders, I reinstalled them with heimdal. I've also done a master clear and erased the internal sd card
Does anyone have an idea of why this is happening?
Are you trying to install the zip from ClockworkMod?
Most likely, the rom is incompatible with the flash method you are choosing which bricks your phone. I had this happen to me twice from either flashing a rom the wrong way or just trying to flash the wrong rom all together and killing my system, but I ended up telling AT&T Techs that it happened when I tried upgrading to 2.2 to avoid warranty issues and they replaced my whole device with a refurbished unit =]
However keep in mind that they cannot jig your device and you will have to do that yourself to get your data off your device before you try getting a new one via this method.
Possible Solution:
1. If you can, flash cm7 to your device
2. Flash This ICS rom
http://forum.xda-developers.com/showthread.php?t=1363760
If you have already tried this then I apologize, but I hope this helps.
Another problem
Ok, everything I see says I should flash from a captivatemtd recovery, but when I install Rom manager and select captivatemtd, it says their are no offical recoveries for it, I'm currently running cognition froyo 2.2 with froyo bootloaders
Does anyone know where I can manually get the captivatemtd CWM? and how do I install it?
kataishin said:
Most likely, the rom is incompatible with the flash method you are choosing which bricks your phone. I had this happen to me twice from either flashing a rom the wrong way or just trying to flash the wrong rom all together and killing my system, but I ended up telling AT&T Techs that it happened when I tried upgrading to 2.2 to avoid warranty issues and they replaced my whole device with a refurbished unit =]
However keep in mind that they cannot jig your device and you will have to do that yourself to get your data off your device before you try getting a new one via this method.
Possible Solution:
1. If you can, flash cm7 to your device
2. Flash This ICS rom
http://forum.xda-developers.com/showthread.php?t=1363760
If you have already tried this then I apologize, but I hope this helps.
Click to expand...
Click to collapse
I can't flash cm7 either
movielover76 said:
Ok, everything I see says I should flash from a captivatemtd recovery, but when I install Rom manager and select captivatemtd, it says their are no offical recoveries for it, I'm currently running cognition froyo 2.2 with froyo bootloaders
Does anyone know where I can manually get the captivatemtd CWM? and how do I install it?
Click to expand...
Click to collapse
I'll go over my method of installing(I've had ZERO issues flashing from/to any ROM)
1. I FTS/MC using Odin 1 Click. My phone build is 1008
2. Root with 1 click root(I have to do steps 2 and 3 because I do not have 3 button recovery)
3. Sideload and install ROM Manager(Rom manager, and CWM update.zip are in the Sideload zip that's attached)
4. Copy CWM Update.zip and ROM to device. Reboot and install CWM
5. Reboot into recovery and install ROM
Odin 1 Click(If you can use it)
http://dl.dropbox.com/u/12100225/Odin I897UCJF6-final-OCD-REV0.zip
Root 1 Click
http://dl.dropbox.com/u/12100225/Root.zip
Sideload Wonder Machine and ROM Manager
http://dl.dropbox.com/u/12100225/Sideloading.zip
Edit** What is the build number of your phone?
Here's what you need
Just download this rom
http://download.cyanogenmod.com/get/cm_captivatemtd_full-181.zip
And then watch this video!
http://www.youtube.com/watch?v=iBPu-GqM9RE
Flash CM7 using odin
then flash ICS using clockwork mod using the instructions I gave you before.
That's the easiest way I found to do it and that's how I went from stock rom to CM7 rom and then finally to ICS
kataishin said:
Most likely, the rom is incompatible with the flash method you are choosing which bricks your phone. I had this happen to me twice from either flashing a rom the wrong way or just trying to flash the wrong rom all together and killing my system, but I ended up telling AT&T Techs that it happened when I tried upgrading to 2.2 to avoid warranty issues and they replaced my whole device with a refurbished unit =]
However keep in mind that they cannot jig your device and you will have to do that yourself to get your data off your device before you try getting a new one via this method.
Possible Solution:
1. If you can, flash cm7 to your device
2. Flash This ICS rom
http://forum.xda-developers.com/showthread.php?t=1363760
If you have already tried this then I apologize, but I hope this helps.
Click to expand...
Click to collapse
Tried this to the letter still doesn't work, could it be because of rom manager not finding a recovery for captivatemtd, some pages say I need that recovery but it isn't available in rom manager.
Finnally
Finnally got CM7 installed the problem was I had to do the three button boot into recovery twice, the first time updates clockworkmod to version 5.x
Now to try ICS again, wish me luck
Thanks
Thanks for all the suggestions, the tip in the video about flashing the speedmod kernel did help I think, I've successfully flashed
teamhacksung's ICS Port for Captivate (BUILD 9) again.
A couple notes here:
1 when your flashing cm7 from cwm( NOT 3e RECOVERY THOUGH) you need to flash the. Zip file, then reboot system, IT WILL PROBABLY BOOT LOOP, three button back to recovery and flash again, then while in recovery still flash gapps. Reboot and it will install fine. You should ONLY need to do the two time flash the first time going to cm7.
2. When you go to rom manager and choose manual flash overide from hitting the menu button you will get the unsupported recovery, DON'T WORRY about it and hit ok. Then another popup will come up and choose 3.x and it will work.
Sent From My KickAss ATT SGS2 SPORTING CM7
This happened before but I can't remember how I fixed it.
1. Flashed TWRP (over codename if that helps)
2. it bootlooped back to recovery instead of starting the system
3. tried flashing another rom/ didn't work
4. finished season 2 of the walking dead
5. reflashed TWRP didn't help (TWRP flashing failed even tho it was the same file I used to get TWRP in the first place)
6. Took the battery out but that didn't help either
I really don't want to odin or use one click any ideas??
lonoguge said:
This happened before but I can't remember how I fixed it.
1. Flashed TWRP (over codename if that helps)
Click to expand...
Click to collapse
Where did you get twrp?
lonoguge said:
2. it bootlooped back to recovery instead of starting the system
3. tried flashing another rom/ didn't work
Click to expand...
Click to collapse
What is "another rom"?
lonoguge said:
4. finished season 2 of the walking dead
5. reflashed TWRP didn't help (TWRP flashing failed even tho it was the same file I used to get TWRP in the first place)
6. Took the battery out but that didn't help either
I really don't want to odin or use one click any ideas??
Click to expand...
Click to collapse
Meh, lets start with the first two...
To stop the reboot to recovery, you must flash eollie's oneclick with bootloaders (so flash it twice, second time flash bootloaders) and go back to mtd.
bhundven said:
Where did you get twrp?
What is "another rom"?
Meh, lets start with the first two...
To stop the reboot to recovery, you must flash eollie's oneclick with bootloaders (so flash it twice, second time flash bootloaders) and go back to mtd.
Click to expand...
Click to collapse
I got it from what I thought was the official XDA TWRP thread but I'm not sure if it was official or not
at first I tried reinstalling codename but now I'm trying Beam (Tuk edition) and it seems to be working
TWRP Major Boot Loop
hey guys, im new here and i desperately need help with my phone!
the other day i was flashing a rom on my samsung galaxy s 4g. Things were turning out fine, until i had some complications on my phone.. so, i removed the rom. when i rebooted my phone, it went directly into the team win recovery project boot loop and every time i try to reboot my phone, it goes into the twrp. I also can't wipe anything and i can't delete anything! Does anybody know how I can solve this or is my phone basically bricked
more details would be helpful..
As in what rom, or what kernel.... etc... and make sure you have the corret phone.
Same problem with t959p
Looks like I'm not alone.......here's my story
the other day I wanted to switch from a stock rom to a custom, so I flashed redux 1.3 which was actually a froyo rom, and it started draining my batt like crazy so I flashed another rom on top of the froyo rom not realizing what I was doing and somehow messed it up cuz now it will only boot into recovery.
Now just to be clear I know this was my fault, I know I should have odin'd back to stock first, but I wasn't thinking at the time.....Ohh and just so you know I've flashed this sucker hundreds of times and was always able to get out of any mess I got in.
So here is the situation as it stands now, 3 button combo to enter download does not work. I can only get it into download with the jig I made. the problem is even in download mode none of my pc's will detect the device as a Samsung composite device, so odin will not see it. I've installed every possible 32 n 64 bit driver I could find including reinstalling kies. Kies wont even see it. I've tried flashing a few roms that I know worked and still it just boots into recovery. Now one thing I'll tell you is that depending on which rom I flash I can get recovery to switch from cwm to twrp. right now I left it with cwm 6.x.
what I need is a cwm flashable stock telus t959p rom complete with bootloaders or at the very least a cwm flashable zip file containing the bootloaders to see if I can recover the phone.
ohh and if your thinking about telling me to google search for the answer then don't bother.......I've spent the last 4 days reading posts and going to different websites and repositories trying to find something that would help me and so far nothing has.
the only thing that might work as a last resort is pushing the bootloaders as per one of raver's or whitehawks posts but it's a little more complicated for me as I would have to set up a laptop with Linux as I don't think i'll be able to pull it off with any of my windows pc's, win7 and win 8 only.
so if anyone has the files I need or can make them please let me know....or if you think you have another solution I could try i'm all ears err eyes.
thanks
Jedi
Have you tried heimdall one-clicks? Maybe it's showing up as gadget or something like that. I've had luck using zadig and heimdall to bring it back from the brink of death.
http://forum.xda-developers.com/showthread.php?t=1358498
EDIT
Woops replied to the wrong thread .
Nothing to see here, move along
Would like to revive a slightly dead thread.
I upgraded to a Galaxy S3 and no longer use my SGS4G for daily use. I had AOKP and disliked it, FC's and didn't like the feel. I have been trying to install a new rom ( old rom, VH Black Ed. ). Every time It loads into TWRP I have the ability to select the zip, install, it says complete, but reboots right back to TWRP menu. I've tried flashing CWM and it will install, flash the rom, reboot, and right back to this TWRP B.S... what am I doing wrong? I want to continue to use this SGS4g for music and internet duties.
How can I install CWM and have it stay even after a reboot? This TWRP is starting to me off
Did you happen to one click to stock before you went ham at the recovery?
Sent from my SGH-T959V using Tapatalk 4
Every time I try to flash something my tablet fails, and I have to revert back my backup. It doesn't matter if I download on PC or from the tablet itself. HELP!!!!
Galaxy Tab 2 7.0
Can you post what rom you are using right now, as well as what recovery version.
Also, what rom are you trying to flash ? You are rooted, right ?
If you can post some more details - am sure people will chime in
Good luck,
bill_in_mtl said:
Can you post what rom you are using right now, as well as what recovery version.
Also, what rom are you trying to flash ? You are rooted, right ?
If you can post some more details - am sure people will chime in
Good luck,
Click to expand...
Click to collapse
I'm running stock 4.0.4, Rooted, Clockworkmod recovery. I have tried to flash several different roms. Romswell, AOKP, CM nightlies thru ROM manager. all of them fail in recovery. I flash stuff all the time on my SIII so I'm not really a Noob to flashing and what not, but I can't figure this one out. Thanks for any help.
What are you using for recovery? When you say failed what is the error message? Sounds like you should prolly reflash a current official recovery. If by failing you mean it hangs on first boot then your not wiping system before flashing. Factory reset and wipe system before you flash.
Are you by chance running any scripts for sd card swap, etc ?
I am running this script, http://forum.xda-developers.com/showthread.php?t=1961097 which swaps my 32GB external sd for the internal sd, which runs great - no issues, except with rom manager and flashing from recovery.
I have to go back and de-activate the script, reboot, and then dowload - or transfer file from PC, and it flashes without issue
Otherwise, I have had no flashing issues of any kind - using CWM 6.0.1.5 for the p3113
Good luck,
Bill
Hey everyone,
My little brother is trying to learn more things about mobile devices and wanted to have a go at my old piece of junk, stock optimus one p500h. So i let him have a go and now it's not working so here is the problem.
First he rooted it and that worked fine with gingeroot and then proceeded to install romanager which bricked the phone but he was able to recover the phone with a recovery.img and using LGMDP-v1.5 and emergency mode.
After that he installed some android system recovery thing "RA-thunderg-1.2.0-gnn" not sure what the software was originally, regardless he tried flashing from the flash from zip from sdcard and used a cyanogenmod zip which he said worked and then the phone said success and rebooted.
Now the phone just sits at the cyanogenmod loading screen and will not boot.
I am able to get into the recovery menu with home,down and power and emergency mode also works.
Where did he go wrong and what does he need to do in order to get this to work properly? Thanks for your help everyone and sorry if the post is a bit disjointed i'm trying to translate what he's saying into the post xD
forthecake said:
Hey everyone,
My little brother is trying to learn more things about mobile devices and wanted to have a go at my old piece of junk, stock optimus one p500h. So i let him have a go and now it's not working so here is the problem.
First he rooted it and that worked fine with gingeroot and then proceeded to install romanager which bricked the phone but he was able to recover the phone with a recovery.img and using LGMDP-v1.5 and emergency mode.
After that he installed some android system recovery thing "RA-thunderg-1.2.0-gnn" not sure what the software was originally, regardless he tried flashing from the flash from zip from sdcard and used a cyanogenmod zip which he said worked and then the phone said success and rebooted.
Now the phone just sits at the cyanogenmod loading screen and will not boot.
I am able to get into the recovery menu with home,down and power and emergency mode also works.
Where did he go wrong and what does he need to do in order to get this to work properly? Thanks for your help everyone and sorry if the post is a bit disjointed i'm trying to translate what he's saying into the post xD
Click to expand...
Click to collapse
If running a Windows PC and the device can boot in to fastboot, you can use Android Flash Recovery ( link in my signature ) to flash another recovery image. There are some more complicated ways using ADB, but well try to avoid them ATM You can also use LGMDP to flash a different recovery image. There are several floating around here at XDA.
As for where he went wrong, I cannot say. Piece of advice, if in doubt - don't do it.
Have you tried booting to recovery and wiping cache and dalvik cache then attempt to boot to Andorid?
shinobisoft said:
If running a Windows PC and the device can boot in to fastboot, you can use Android Flash Recovery ( link in my signature ) to flash another recovery image. There are some more complicated ways using ADB, but well try to avoid them ATM You can also use LGMDP to flash a different recovery image. There are several floating around here at XDA.
As for where he went wrong, I cannot say. Piece of advice, if in doubt - don't do it.
Have you tried booting to recovery and wiping cache and dalvik cache then attempt to boot to Andorid?
Click to expand...
Click to collapse
thanks for the fast reply, looks like recovery is gone now? I had attempted to clear the cache though. Would you mind giving me a step by step as im unsure of what i need to do now xD not sure what i need downloaded or to do what with what after my brothers done all this haha
Just flash a recovery from LGMDP for your phone.. then download a rom for your phone and wipe everything in recovery and flash the rom
And do not flash stock rom from kdz or lgmdp if you cannot boot your phone. It has high chances of bricking
Junior Einstein said:
Just flash a recovery from LGMDP for your phone.. then download a rom for your phone and wipe everything in recovery and flash the rom
And do not flash stock rom from kdz or lgmdp if you cannot boot your phone. It has high chances of bricking
Click to expand...
Click to collapse
ok now it's running again and sadly it's giving me an unkown baseband and no service now! I tried flashing to the old legacy baseband for cyanogenmod 7.2 / 2.3.7
forthecake said:
ok now it's running again and sadly it's giving me an unkown baseband and no service now! I tried flashing to the old legacy baseband for cyanogenmod 7.2 / 2.3.7
Click to expand...
Click to collapse
Cm7(except a very old one from mik_os), stock gb and up requires new baseband. You can search for baseband fix and install through recovery ( I don't remember if it's old bb fix or new bb fix, try for yourself )
You can also search how to install new bb permanently but it's more difficult and has(I think) chances of bricking your phone
Sent from my LG-P500 using xda premium