I have installed the $MIUIv5_3.12.13_4.2.2_A110-NEW BUILD ROM. Its features are awesome and even the looks are pretty good. But I am facing some problems.
1. Camera application is not working.
2. Phone's internal storage is as SD card storage.
3. RAM usage is around 90% even without installing any new application.
4. Not able to install any new apk file from SD card.
Other than these every thing is working fine.
for me camera working fine
AAParty said:
I have installed the $MIUIv5_3.12.13_4.2.2_A110-NEW BUILD ROM. Its features are awesome and even the looks are pretty good. But I am facing some problems.
1. Camera application is not working.
2. Phone's internal storage is as SD card storage.
3. RAM usage is around 90% even without installing any new application.
4. Not able to install any new apk file from SD card.
Other than these every thing is working fine.
Click to expand...
Click to collapse
i too installed the same rom everything working fine even both camera and fm working fine. after installing the rom fm radio was not working then i patched the stock rom file now it is working see my post in Q & A about "fm not working in miui". but there is some lag in browsing apps if internet is switched on. hope it will be solved by the rom creator.
same problem i faced
i installed it with thunderzap rom.even though camera was not wrking atall.apps wer not installing i have been trying it old versions too..waste i dont understand y dey dnt rectify it
try to install
varuntheraj said:
i installed it with thunderzap rom.even though camera was not wrking atall.apps wer not installing i have been trying it old versions too..waste i dont understand y dey dnt rectify it
Click to expand...
Click to collapse
hi,
try to install according to the steps specified in the miui rom page. wipe dalvik cache, is must before installing rom. so try one more time slowly.
Which one is better
Which one is better
MIUI or LegoIce
for A110?
Related
CyanogenMod is an aftermarket firmware for a number of cell phones based on the open-source Android operating system. It offers features not found in the official Android based firmwares of vendors of these cell phones.
Installation:
You need to have installed Clockworkmod recovery!
Boot into recovery by pressing Call+Volume Up+Power.
After that install the ROM from the SD card using ClockworkMod Recovery!
+If you want Google apps then install this: http://goo.im/gapps/gapps-ics-20120429-signed.zip
About Me: I have been cooking ROMs since 2011 and my first developed ROMs for Huawei U8500 were CyanogenMod ROMs.
Known issues*
1. OpenMax
2. FM Radio
3. Camera (video recording)
Changes
CyanogenMod 9.0.0 Nightly 2012.06.18
Updated CyanogenMod source!
Added tweaks!
Fixed D-Pad!
CyanogenMod 9.0.0 Nightly 2012.06.13
Updated CyanogenMod source
A lot of bug fixes
CyanogenMod 9
Initial release
Current release
CyanogenMod 9.0.0 Nightly 2012.06.18
Previous releases
CyanogenMod 9.0.0 Nightly 2012.06.13
CyanogenMod 9
Ask me if you need to!
Market
And one of the bugs is Market get's error
gapps
Plz give me working gapps link
Thanks for your development
mohithimu said:
Plz give me working gapps link
Thanks for your development
Click to expand...
Click to collapse
Install the Rom, then wipe data and cache... and market will work...
2 bugs still exist:
- no keylock (I installed Ripplelock)
- no gallery
gyilki said:
Install the Rom, then wipe data and cache... and market will work...
2 bugs still exist:
- no keylock (I installed Ripplelock)
- no gallery
Click to expand...
Click to collapse
on my phone after wipe market is still don't working :\ what gaaps you are using? if you can share link
question: can you turn off the trackpad mouse pointer, to work as 2.3.7
galery not working properly
otherwise a good rom, I like it
Pointer remover!
This update removes pointer but do not worry the D-Pad will work as in Android 2.3.7!
Update Not working so you need to put those files in /system folder by yourself!
Pointer will be fixed in next update!
Can't impossible get Gapps to work. Have tried evrything (I think)!
Have tried a couple other Gapps then latest one given in this thread.
Have tried installing CM9 and Gapps a couple of times, with reboot and cleaning cache etc in diffrent orders... without luck.
Latest I tried clearing cache, data, dalvik, etc.
Installed CM9.
Installed Gapps (given above in thread)
Reboot.
Evrything seems to work, but no icons/apps appear... >_<
klavsanson said:
This update removes pointer but do not worry the D-Pad will work as in Android 2.3.7!
Install it from ClockworkMod recovery!
Click to expand...
Click to collapse
not working:-(
great job
klavsanson said:
This update removes pointer but do not worry the D-Pad will work as in Android 2.3.7!
Click to expand...
Click to collapse
thanks, its work for me!!
when i want install new release recovery show me that installation aborted
Now I've done some more testing... and done the installation over and over a couple of times
Theese are my conclusions:
* Installation of Gapps is partially working!
From one installation to another, diffrent apps and function is installed (or working) on the phone.
Theese functions I've found (so far) that vary from time to time:
* Gmail
* Market
* Screen lock
* Installation guide program when new user/clean installation
tested
After a while I managed to set up it to work good
1.wipe data factory reset, dalvik cache...everything
2.flash rom
3.wait for the phone to start
4.wipe again,start the phone
5.flash gpapps
Instead of stock gallery use quick pick.
Little bit slow when entering menu (probably becouse of stock zoom effect).
market working,camera working, synced account without problems
Great job!
I installed CyanogenMod 9.0.0 Nightly 2012.06.18
My phone just flies.
Battery lasts a long time
RAM size 140 MB (it is very good)
Less:
*1.The graphics system sometimes produces errors
*2.File Manager does not play music
Otherwise, I like ...
i instaled this rom, and i am very satisfied, i like it very much, i want to use it as my prime rom, but, i have problem, landscape mod dosent work, nor in messages nor in menu. atlist in messages i must have landscape mod. can u fox this???
sory for my bad english
FIX!
Zbajchou said:
when i want install new release recovery show me that installation aborted
Click to expand...
Click to collapse
pedjakis said:
i instaled this rom, and i am very satisfied, i like it very much, i want to use it as my prime rom, but, i have problem, landscape mod dosent work, nor in messages nor in menu. atlist in messages i must have landscape mod. can u fox this???
sory for my bad english
Click to expand...
Click to collapse
Zbajchou, I have fixed the update so download it again!
pedjakis, install Attached File!
How could we install google talk on this rom?
Graphics bug.Dunno what to do.Very annoying.
EDIT:Factory reset helped. Very happy now.Awesome ROM!
EDIT2:No sound when sms comes.Is there any fix?
Great Job!
Hi Klavsanson,
I've installed the latest version and It's working almost everything, great
I don't know if it's my phone, but I can't neither use USB nor wifi tethering. This is important for my job.
I've previously wiped data, cache, dalvik
Gallery has an extrange behaviour as is not possible to see correctly anything-
Thanks for your job
Just out of curiosity
how come that gapps are so massive in size 80mb ?compared to cm7 only 9mb
I'm thinking about installing CM10, but I have a couple of quick questions:
Does the latest build still have over clocking leading to "burnt NANDs"?
Which gapps zip do I need to install? Super stripped? (What if I install mounts2SD, can I get full gapps then?)
Have the force closes in the camera been fixed now?
Will mounts2SD work with CM10, allowing me to install as many apps as I want? And has anyone tried installing it with the Play Store app?
Thanks for any help.
SifJar said:
I'm thinking about installing CM10, but I have a couple of quick questions:
Does the latest build still have over clocking leading to "burnt NANDs"?
Which gapps zip do I need to install? Super stripped? (What if I install mounts2SD, can I get full gapps then?)
Have the force closes in the camera been fixed now?
Will mounts2SD work with CM10, allowing me to install as many apps as I want? And has anyone tried installing it with the Play Store app?
Thanks for any help.
Click to expand...
Click to collapse
Hi ya
How are you doing??
1. If you Flash with latest kernel ,which is not overclocked, it'll not probably produce burnt nand.
2.super stripped only
3. Full gapps is a total junk ~ they go to /system ~you can symlink them to app ~system in mount2SD. Big work
4. Camera AFAIK is totally unstable ~at least for me.. some say it's better etc. As always third party cams work fine (you can read my signature link to know more)
5. Ya.. it'll work. Mount2SD will let you install as many as you want as per size of SD ext ~however kernel 3 has problems mounting SD ext ~some partition types ~but once it works, it'll work for ever until you change recovery or change partitions
6. I am using the play store version. Working fine for me. I would've recommended play version for your stock Rom as well, if they released mount2SD @ that time
LâTêS†↭ⓛⓘⓝⓚⓢ™CM10 HTC A310E.
If I haven't given you link, it's above. Just click it
Awesome, thanks for your help. Here's hoping I manage not to completely mess up my phone haha.
u cn use the signed GAPSS, if you prefer....
You unzip the Stripped version, and the Signed GAPPS....
Copy everything from the SIGNED GAAPS that are ALREADY present in Stripped version... rest throw in trash..
RE-ZIP.... you got a SIGNED STRIPPED GAPPS...
SifJar said:
I'm thinking about installing CM10, but I have a couple of quick questions:
Does the latest build still have over clocking leading to "burnt NANDs"?
Which gapps zip do I need to install? Super stripped? (What if I install mounts2SD, can I get full gapps then?)
Have the force closes in the camera been fixed now?
Will mounts2SD work with CM10, allowing me to install as many apps as I want? And has anyone tried installing it with the Play Store app?
Thanks for any help.
Click to expand...
Click to collapse
USE the STRIPPED VERSION OF GAPPS!
INSTEAD of m2sd,use INT2EXT!! IT manages your data more efficiently!!
AND THE LATES cm10 beta#6 (oc 800Mhz) doesn't burn your NAND!! I TOO AM USING IT!!
I downloaded cm11 kitkat rom for galaxy fit developed by yajnab ......its was gr8.......there were bugs but main thing i want to know that how to access play store.....no gapps preinstalled and even if i install playstore apk
it doesnt open up i tried 3 versions of playstore and even installed latest one"s apk..but it opens and then shuts immediately ...plz is there any way
( other wise camera is workin except video and its good rom)....
yourzgapp
sid jain said:
I downloaded cm11 kitkat rom for galaxy fit developed by yajnab ......its was gr8.......there were bugs but main thing i want to know that how to access play store.....no gapps preinstalled and even if i install playstore apk
it doesnt open up i tried 3 versions of playstore and even installed latest one"s apk..but it opens and then shuts immediately ...plz is there any way
( other wise camera is workin except video and its good rom)....
Click to expand...
Click to collapse
ZordanKV gapps work very well.
link http://forum.xda-developers.com/show....php?t=2240652
I tried installing many kinds of gapps, google play services is still not working. it always FC.
Its really troublesome without it, can anyone please provide a solution
vritant said:
I tried installing many kinds of gapps, google play services is still not working. it always FC.
Its really troublesome without it, can anyone please provide a solution
Click to expand...
Click to collapse
These gapps work like a charm and i still have 41mb available.
link http://forum.xda-developers.com/showthread.php?t=2548351 or this download from here
Gapps-KK-4.4.0-Signed.zip this.... https://drive.google.com/folderview?id=0B-W0zjAtOcMtX1ZobnBTN2RkblE
just flash it with recovery.
ahmetakin said:
These gapps work like a charm and i still have 41mb available.
link http://forum.xda-developers.com/showthread.php?t=2548351 or this download from here
Gapps-KK-4.4.0-Signed.zip this.... https://drive.google.com/folderview?id=0B-W0zjAtOcMtX1ZobnBTN2RkblE
just flash it with recovery.
Click to expand...
Click to collapse
I tried those as well, still isn't working:crying:
I wiped the data and installed the gapps, and guess what, it worked on the FOURTH try!
No clue where the prob was, but solved anyway. Thanks
vritant said:
I wiped the data and installed the gapps, and guess what, it worked on the FOURTH try!
No clue where the prob was, but solved anyway. Thanks
Click to expand...
Click to collapse
Though it'll be great if Yajnab integrates gapps in cm 11 as soon as possible, it would save more space, since link2sd is not fully working and mounts2sd is not at all working (not mounting sd-ext), and in our galaxy fit, storage space is one of the chief problems we encounter
Hello,
I am having issue with my camera "can't connect to the camera" on oneplus one (64gb).
Recently i formatted my system data using TWRP and after that it showed NO OS INSTALLED. So i downloaded nightly build from cyanogenmod's website and sideloaded the build in fastboot mode with gapps as well. During this process l lost recovery & backup, & encountered Can't connect to the camera issue, Please Help.
Everything was working properly even after this my device was much lightning fast & smoother.
But when i opened my Google camera then it displayed Can't Connect to the camera. I did almost all the things-
1. Firstly restarted the device to check whether it can be fixed by this method or not but my issue didn't resolve then i force stopped camera by clearing cache & data & then restarted the device but still same pop up appeared. On some forum thread's i also found that by installing app "Camera (CMFix) for Cyanogenmod" from play store will fix this issue, but app was not getting launched my problem didn't get resolve.
2. After getting all this issue i thinked to install snapshot build to check whether i can use my camera but this thing didn't work as well.
3. On so many forum's i found that changing the ROM will fix this issue so i downloaded Paranoid Rom and installed it but still my issue with camera didn't resolve.
I am following XDA forum as viewer since so years time and also i know that from here i can get fastest solution.
This is my first post on XDA developers cause i didn't find solution for this issue
Please please help me as i did almost all thing to fix my issue. I am ready to do anything to solve this issue. Please help
what version of gapps did you installed? in order for the camera to work you must install the "mini or micro" gapps package, when you are running AOSP, somehow the complete gapps package breaks the camera.
you can get the micro gaaps package from PA, it works for me https://www.androidfilehost.com/?w=files&flid=15797
livito said:
what version of gapps did you installed? in order for the camera to work you must install the "mini or micro" gapps package, when you are running AOSP, somehow the complete gapps package breaks the camera.
you can get the micro gaaps package from PA, it works for me https://www.androidfilehost.com/?w=files&flid=15797
Click to expand...
Click to collapse
To clarify this, you can install any gapps package as long as it doesn't contain a camera.
Transmitted via Bacon
I did this once and had to flash cm11s once and then whatever rom I wanted after that in order to have a working camera.
Finally the first ever Custom ROM for Canvas Spark 2 Q334 is here
I have just finished porting this ROM and still Debugging
Debugging is almost finished and I have uploaded the zip with many improvements .
Till the date there is no available ported or official custom rom available for this device but now the first Custom ROM this Super Budget Phone is now available for download and that is too a Cyanogen based. It is an Resurection Remix ROM
The Device Name may show as "ASUS_Z00VD" but don't worry Check out the screenshots
The size of the ROM is 353 MB
YOU will need to ROOT your device first weather by KingRoot or by flashing Custom Recovery[TWRP Recomended] through PC [Custom Recovery is mandatory as you will need it to flash the ROM]
ROM Link: Resurection Remix for Micromax Q334
TWRP Recovery Link[flash through SP Flash tool only to relace stock recovery]: TWRP Recovery
Steps:-
1. Download the zip and place it in your SD Card
2. Backup your current System through TWRP Recovery[Check only the upper column while backing up not the bottom column;Save to SD Card ]
3. Then wipe your current system[not your sd card]
4. Then flash the Resurection Remix.zip file by going to Install and browsing to the location where you downloaded or placed it in
5. After flashing reboot
6. You will see the RR logo instead of Canvas logo while booting
7. After some time you will see a Update process to go on it will take 6-7 minutes to complete
8. BOOM after update process you have Custom ROM on you Spark 2 Q334
9. You will see the display to be abnormal [Due to wrong LCD Density value{320 DPI} ];To fix this Go to >Settings > Display > LCD Density > Select 240 DPI;The SystemUI will automatically Restart to apply the changes and there you go your System is Ready
10. Please check the Notes below to solve BUGS
Note: Some Bugs are still present:
1. You need to flash and install Xposed Installer And then XInternalSD in order to make apps save pictures and all on SD card otherwise they will save in Internal Storage:-
Link for:
Xposed zip: Xposed.zip
Xposed Alpha apk(install after flashing):Xposed Alpha.apk
After installing xposed search and download XInternalSD activate and reboot and then open it and check "Enable for all apps"[don't check Include system apps it will cause problems]
2. The Camera recording issue:-
If you use any Third Party app like Google Camera then you will face issues while recording a video though Stock camera doesn't have any issue like that except for it to store the video in internal storage.[Please reply to this thread if you wanna know the fix]
3. FM Radio:-
There is no FMRadio App so just download one third party app from store
4. Google Apps Package[GAPPS]:-
Like other custom roms this rom also doesn't have Gapps preinstalled so u need to download it from here
select "ARM" then Android version "5.1" and select variant as "pico" then download and flash BOOM you have Google Play Services now
5. Camera Improvement:-
Flash this if you want to improve the camera quality
[Link will be uploaded soon pls don't mind]
6. Video Playback Issue:-
There will be issues[lags,etc] while playing some videos to solve this Go to >Settings>Developer Options>Use awesome player
Otherwise use MXPlayer with hw+ decoder
7. Coming Soon
Please comment if any queries or bugs
In case you get stuck in boot loop flash the backup you took from TWRP Recovery and if you haven't taken backup then you need PC to flash the STOCK Firmware here is the Link for the Stock firmware
Thanks for reading this long,
And thanks to xda for allowing me to post my ROM thank you xda
Please Donate if you like my work
My PayPal email: [email protected]
Nice well stable ROM with fewer bugs
Bugs-1)mobile network signal are false. 2)linking apps 2sdcard via apps2sd doesn't work at all.3)battery problem draining fast(disappointed)
abz.jpatil98 said:
Bugs-1)mobile network signal are false. 2)linking apps 2sdcard via apps2sd doesn't work at all.3)battery problem draining fast(disappointed)
Click to expand...
Click to collapse
Sorry for the bugs but actually it's my first rom so you know I am a bit rookie in the case is ..........................................................And linking apps with sd card worked perfectly with me though use link2sd instead apps2sd............................................And lastly sorry for the late reply
SD card bug
Hey.. That SD card bug still exist after installing XInternalSD (Enabled for all apps)..
Whenever I take photos or take backup of any app it goes to internal storage. Also apps do not move to external SD card.
What to do..?? Please fix this.
Pretty much stable but sd card bug is annoying. Anyways great work.
Edit: proximity sensor not working.
sonai365 said:
Finally the first ever Custom ROM for Canvas Spark 2 Q334 is here
I have just finished porting this ROM and still Debugging
Debugging is almost finished and I have uploaded the zip with many improvements .
Till the date there is no available ported or official custom rom available for this device but now the first Custom ROM this Super Budget Phone is now available for download and that is too a Cyanogen based. It is an Resurection Remix ROM
The Device Name may show as "ASUS_Z00VD" but don't worry Check out the screenshots
The size of the ROM is 353 MB
YOU will need to ROOT your device first weather by KingRoot or by flashing Custom Recovery[TWRP Recomended] through PC [Custom Recovery is mandatory as you will need it to flash the ROM]
ROM Link: Resurection Remix for Micromax Q334
TWRP Recovery Link[flash through SP Flash tool only to relace stock recovery]: TWRP Recovery
Steps:-
1. Download the zip and place it in your SD Card
2. Backup your current System through TWRP Recovery[Check only the upper column while backing up not the bottom column;Save to SD Card ]
3. Then wipe your current system[not your sd card]
4. Then flash the Resurection Remix.zip file by going to Install and browsing to the location where you downloaded or placed it in
5. After flashing reboot
6. You will see the RR logo instead of Canvas logo while booting
7. After some time you will see a Update process to go on it will take 6-7 minutes to complete
8. BOOM after update process you have Custom ROM on you Spark 2 Q334
9. You will see the display to be abnormal [Due to wrong LCD Density value{320 DPI} ];To fix this Go to >Settings > Display > LCD Density > Select 240 DPI;The SystemUI will automatically Restart to apply the changes and there you go your System is Ready
10. Please check the Notes below to solve BUGS
Note: Some Bugs are still present:
1. You need to flash and install Xposed Installer And then XInternalSD in order to make apps save pictures and all on SD card otherwise they will save in Internal Storage:-
Link for:
Xposed zip: Xposed.zip
Xposed Alpha apk(install after flashing):Xposed Alpha.apk
After installing xposed search and download XInternalSD activate and reboot and then open it and check "Enable for all apps"[don't check Include system apps it will cause problems]
2. The Camera recording issue:-
If you use any Third Party app like Google Camera then you will face issues while recording a video though Stock camera doesn't have any issue like that except for it to store the video in internal storage.[Please reply to this thread if you wanna know the fix]
3. FM Radio:-
There is no FMRadio App so just download one third party app from store
4. Google Apps Package[GAPPS]:-
Like other custom roms this rom also doesn't have Gapps preinstalled so u need to download it from here
select "ARM" then Android version "5.1" and select variant as "pico" then download and flash BOOM you have Google Play Services now
5. Camera Improvement:-
Flash this if you want to improve the camera quality
[Link will be uploaded soon pls don't mind]
6. Video Playback Issue:-
There will be issues[lags,etc] while playing some videos to solve this Go to >Settings>Developer Options>Use awesome player
Otherwise use MXPlayer with hw+ decoder
7. Coming Soon
Please comment if any queries or bugs
In case you get stuck in boot loop flash the backup you took from TWRP Recovery and if you haven't taken backup then you need PC to flash the STOCK Firmware here is the Link for the Stock firmware
Thanks for reading this long,
And thanks to xda for allowing me to post my ROM thank you xda
Please Donate if you like my work
My PayPal email: [email protected]
Click to expand...
Click to collapse
nicework bro
mohitmallick17 said:
nicework bro
Click to expand...
Click to collapse
Thanks although i have discontinued working on this phone i ported about 5 ROMs for this device among which only this one and Flyme OS ran very well with minor bugs
amananandxda said:
Hey.. That SD card bug still exist after installing XInternalSD (Enabled for all apps)..
Whenever I take photos or take backup of any app it goes to internal storage. Also apps do not move to external SD card.
What to do..?? Please fix this.
Click to expand...
Click to collapse
Did you flashed Xposed framework and activated the xinternalsd in xposed installer?? Sorry for late reply:angel::angel::angel::angel::angel:
sonai365 said:
Thanks although i have discontinued working on this phone i ported about 5 ROMs for this device among which only this one and Flyme OS ran very well with minor bugs
Click to expand...
Click to collapse
It would be very nice of you to share other roms you mentioned.
Where is the link
fradeen said:
It would be very nice of you to share other roms you mentioned.
Click to expand...
Click to collapse
I co7ld have bt unfortunately most of them are lost only flyme os is there i can upload it but it has data connection issue
FlymeOS_Q334_port.zip
Here is the link for flyme os I know I am replying about after 1 yr now but seriously I have been busy with my Redmi Note 4 so didnt got time for this device
From where I can get the other ROMs for this device
sonai365 said:
Thanks although i have discontinued working on this phone i ported about 5 ROMs for this device among which only this one and Flyme OS ran very well with minor bugs
Click to expand...
Click to collapse
Give other ROM link also .. Quick
Hi.
I am a micromax canvas spark 2 q334 user. It would be very helpful for me if I could get Android marshmallow for my phone. Please get me that rom as soon as possible.
shashank salian said:
Hi.
I am a micromax canvas spark 2 q334 user. It would be very helpful for me if I could get Android marshmallow for my phone. Please get me that rom as soon as possible.
Click to expand...
Click to collapse
There is actually a marshmallow rom wich i recently saw on the net for mt6580 kernel 3.10.72 but sadly i dont own this device anymore ............i can port this rom but can't test it so sorry for that its been 2 yrs i guess since i last worked on this device
plz give micromax q334 Marshmallow rom
plz upload the TWRP custom recovery for Micromax Canvas Spark 2 .
The existing link is not working
Subham024 said:
plz upload the TWRP custom recovery for Micromax Canvas Spark 2 .
The existing link is not working
Click to expand...
Click to collapse
Man I am late........sorry mate it's been many years not only I have lost all Q334 related files I don't even own the device anymore although I take that you don't need it any more