I was running LiquidSmooth 2.9. Decided to try the latest KK nightly. Downloaded everything, made a backup, etc. Went to flash and it said (status 7) error. Tried again, same thing. Decided to update to the latest TWRP and try again. Same error. Tried one more time and it worked. After the rom was loaded I immediately noticed that the rom was not stable enough for a daily driver.
Booted into recovery and tried to restore to my previous backup. For whatever ready TWRP could not locate the backup. I tried to move the back up for a while but it wouldn't move to the correct folder. I said screw it I will just download the Liquid Smooth 2.37 which was the latest official release and just reflash. Downloaded everything, then flashed it. Everything set successful, gaps and rom, but now it wont get past the splash screen. I have reflashed like 5 times now all without issue but stuck at splash screen. I can get into recovery fine.
What is my next step to revert back to my previous backup or reflash to a working rom? Any help would be greatly appreciated.
Odin my friend
Sent from my SCH-I535 using Tapatalk
I had the same problem on kk i had to do a factory reset wipe catche dalvik then flash liquid smooth kk pa gapps im working fine. Honestly my own opinion i prefer liquid 2.37 over kk. I read couple post ppl had to get the latest cwm recovery to flash KK roms
Were you able to revert back to 2.37? I'm stuck here in limbo at the moment.
1967ls2 said:
Were you able to revert back to 2.37? I'm stuck here in limbo at the moment.
Click to expand...
Click to collapse
Yes after couple tries I just factory reset flashed rom
i did these steps
factory reset install rom 2.9 or 2.37 then after all set up i went bck to recovery flashed a backup file I had of 2.37
twistedillutions said:
Yes after couple tries I just factory reset flashed rom
i did these steps
factory reset install rom 2.9 or 2.37 then after all set up i went bck to recovery flashed a backup file I had of 2.37
Click to expand...
Click to collapse
what recovery are you using? TWRP or CWM?
I'm getting no where.
1967ls2 said:
what recovery are you using? TWRP or CWM?
I'm getting no where.
Click to expand...
Click to collapse
Twrp
Related
Looking for some input on clean ROM on the TF300T,
This is my second time trying to install it and both times it was successful, however as soon as the boot image loads up it stays stuck loading... I did download the file again thinking it may have been corrupted.
It has been sitting there loading for 20 minutes now.
I am using cwm the latest version and I did not install a kernel still running stock
Any ideas on what could cause this?
chibra said:
Looking for some input on clean ROM on the TF300T,
This is my second time trying to install it and both times it was successful, however as soon as the boot image loads up it stays stuck loading... I did download the file again thinking it may have been corrupted.
It has been sitting there loading for 20 minutes now.
I am using cwm the latest version and I did not install a kernel still running stock
Any ideas on what could cause this?
Click to expand...
Click to collapse
CWM has issues on this unit. Many, many complaints. I use twrp. If you decide to use twrp be sure to choose JB and tf300t version.
Clean ROM is freaking amazing! Seriously just do it I love the mods I can make for it too! Can't wait till I get my volume long press seek mod done! Love this device!
Sent from my SGH-T999
"So I put my phone into airplane mode and threw it... worst transformer ever. -.-" -My friend
tobdaryl said:
CWM has issues on this unit. Many, many complaints. I use twrp. If you decide to use twrp be sure to choose JB and tf300t version.
Click to expand...
Click to collapse
I initially when i first rooted intalled Twrp however i was not able to flash anything at all with it, it would give me errors.... that is the only reason i went to cwm.... I was able to make backups and restores with but ROMs flashing would just fail
chibra said:
I initially when i first rooted intalled Twrp however i was not able to flash anything at all with it, it would give me errors.... that is the only reason i went to cwm.... I was able to make backups and restores with but ROMs flashing would just fail
Click to expand...
Click to collapse
OK. It was just a suggestion since the problem you are experiencing is usually cleared by using twrp.
oryhight sullivan
tobdaryl said:
OK. It was just a suggestion since the problem you are experiencing is usually cleared by using twrp.
Click to expand...
Click to collapse
i m going to give twrp another shot...
i installed http://tinyw.in/5foT
JB version for the TF300T
This is the Rom i m trying to install
http://forum.xda-developers.com/showthread.php?t=2049322
Kernel is still stock and i ve left it that way through the aroma installer
Everytime i flash and reboot i get a boot loop
chibra said:
i installed http://tinyw.in/5foT
JB version for the TF300T
This is the Rom i m trying to install
http://forum.xda-developers.com/showthread.php?t=2049322
Kernel is still stock and i ve left it that way through the aroma installer
Everytime i flash and reboot i get a boot loop
Click to expand...
Click to collapse
I'm sorry it is hard to tell since you have chosen an older twrp to install. The current is five versions later and was updated as the kernels were updated to account for changes. The rom you are flashing is based on 10.4.4.25.
chibra said:
i installed http://tinyw.in/5foT
JB version for the TF300T
This is the Rom i m trying to install
http://forum.xda-developers.com/showthread.php?t=2049322
Kernel is still stock and i ve left it that way through the aroma installer
Everytime i flash and reboot i get a boot loop
Click to expand...
Click to collapse
Use TWRP 2.4.1.0
You are using a very old version of TWRP that has bugs with AROMA installer. So that is most likely where your issues are.
What ROM are you ccoming from? What boot loader are you on.
Sounds to me like you need to upgrade your boot loader and possibly do a full wipe - make sure you are on latest TWRP first otherwise you could brick if you use an older recovery!
sbdags said:
What ROM are you ccoming from? What boot loader are you on.
Sounds to me like you need to upgrade your boot loader and possibly do a full wipe - make sure you are on latest TWRP first otherwise you could brick if you use an older recovery!
Click to expand...
Click to collapse
Wise words. Nobody likes to listen to me so im glad someone else suggested it!
elesbb said:
Use TWRP 2.4.1.0
You are using a very old version of TWRP that has bugs with AROMA installer. So that is most likely where your issues are.
Click to expand...
Click to collapse
Updated the TWRP to the version you mentioned still stuck in boot loop.
sbdags said:
What ROM are you ccoming from? What boot loader are you on.
Sounds to me like you need to upgrade your boot loader and possibly do a full wipe - make sure you are on latest TWRP first otherwise you could brick if you use an older recovery!
Click to expand...
Click to collapse
The only ROM i was able to flash that was fully functioning is cm10.1,
i have also flashed PA 2.9 but had some bugs i couldn't stand (screen rotation not working, extended desktop with no pie)
as for boot loader it says 1.00e by "US _Epad-10.4.2.20-20121228" A03
I just updated the TWRP as recommended on the other post (v2.4.1.0)
on every flash i wipe dalvik / Cache / Factory reset.
Before attempting to boot into Clean Rom i also followed the steps on screen saying to wipe cache and dalvik.
I m hoping PA releases a 3.0 for this device and/or i m able to get Clean rom running
chibra said:
The only ROM i was able to flash that was fully functioning is cm10.1,
i have also flashed PA 2.9 but had some bugs i couldn't stand (screen rotation not working, extended desktop with no pie)
as for boot loader it says 1.00e by "US _Epad-10.4.2.20-20121228" A03
I just updated the TWRP as recommended on the other post (v2.4.1.0)
on every flash i wipe dalvik / Cache / Factory reset.
Before attempting to boot into Clean Rom i also followed the steps on screen saying to wipe cache and dalvik.
I m hoping PA releases a 3.0 for this device and/or i m able to get Clean rom running
Click to expand...
Click to collapse
If you are coming from cm10.1 you will definitely need to do a full wipe as it is non stock. It does say this in the first post. You only do a dalvik and cache wipe when upgrading from the same ROM or in CROMI's case from stock.
Do a data wipe in recovery, make sure you have a titanium backup or equivalent if you want to restore apps.
Success!!!
It worked perfectly fine after i install the back up i did before i flashed my 1st costume rom,
I rooted made a back up at stock/rooted... It just would not install from a full wipe,
it install fine once i flashed that specific backup and dirty flashed then wiped dalvik and cache before booting.
about a week ago i updated to the newest cm10.1 nightly with gapps 4.2. after flashing those i tried to flash leankernel. my battery was low and the phone turned off when rebooting after the leankernel flash. since then i cannot flash any kernel. i have to do a battery pull to get back into cwm recovery. once in recovery i can wipe data and reinstall cm 10.1 with the standard kernel. i have tried just about every combo of wiping cache, davlik, fix permissions. still not able to flash any kernel. could it have something to do with gapps 4.2 or the phone shutting off mid flash? if so does anyone know how to repair? i already flashed back to stock and rerooted re-unlocked, etc. thanks
and to clarify , it was gapps 4.2.2
Ive found that 3.4 based kernels work with some roms and not with others.
try an older build date its likely not 3.4 based.
or, if your trying a non 3.4 kernel and it wont boot, try a 3.4 kernel.
If you're trying to flash LeanKernel, what's the zip file you're attempting to flash? Also, what are you wiping prior to flashing the kernel?
Sent from my SCH-I535 using xda app-developers app
i tried the mastamoon 3.4 kernel with no luck . the rom i amrunning is the cm-10 nightly 2013-03-24. the leankernel version i am running is lk_s3vzw_aosp_jb42-v2.9. i wipe cache then wipe davlik then flash, it always worked with that procedure before, but since the problem i have tried wiping both after along with fixing permissions. before this issue it was simple as pi, wipe cache, davlik, flash, reboot .
You could always try twrp. Ha. It would make no sense why you couldn't install a kernel.
I would assume since you went back to Odin stock. It would flash factory kernel and give you a clean slate.
So unless cwm is outdated.... ?
Sounds very weird.
actually that is another variable that i didnt think of. cwm updated from 6.0.1 to 6.0.3 or something like that. but then again the original recovery i used after the clean slate was the ez recovery which used 6.0.1 stupid question, but how does twrp work? i always used cwm. i tried flashing twrp but cwm came up when i went to recovery when i tried using twrp?! that was before i did a stock recovery so it couldnt be possible that i am running both? should i delete cwm before i use twrp? if so how? if you dont feel like going into that much detail, i can search it.
i figured out twrp. never gave it achance. ill see if that does the trick
tried twrp. still the same thing going on. gonna go to bed now. ill check back tomorrow after work to see if there are any more ideas. thanks
Problem solved. I went into my internal SD via astro and deleted all old traces of cwm as well as ez unlock and ez recovery. I was getting a generic (showed setting icon instead of regular su icon)super user screen come up prior to that, after deleting those files the regular super user came back. Rebooted into recovery via twrp , cleared cache, Davlik, flashed lean kernel and it worked. What do you think the issue was? Lingering files from ez recovery? That weird su thing?
So I can't get 4.3 ROMs to reboot. I have tried several different Roms and always the same thing. Mainly Pac. It loads the first time fine, but when I reboot it just hangs on the Galaxy S4 screen. I have updated TWRP to 2.6 and tried wiping cache and dalvik between flashing the ROM and gaaps. And still nothing the only way I can get to do anything after that is to reformat and do a factory reset and the reflash the ROM. Any help would be greatly appreciated.
captainjibblet said:
So I can't get 4.3 ROMs to reboot. I have tried several different Roms and always the same thing. Mainly Pac. It loads the first time fine, but when I reboot it just hangs on the Galaxy S4 screen. I have updated TWRP to 2.6 and tried wiping cache and dalvik between flashing the ROM and gaaps. And still nothing the only way I can get to do anything after that is to reformat and do a factory reset and the reflash the ROM. Any help would be greatly appreciated.
Click to expand...
Click to collapse
So just in case anyone else runs into this problem, I figured it out myself. I am running the MDK build so the only thing you would change is th rooting process.
1. Reflash Stock using ODIN
2. Reroot http://forum.xda-developers.com/showthread.php?t=2381382
3. Install newest 2.6.3 TWRP
4. Back up Stock
5. Flash 4.3 ROM and 4.3 Gapps
I'm not sure if it was reflashing stock or the newest update to twrp but whichever. It worked.
Every 4.3 rom I install after the first reboot it hangs at unlocked bootlaoder screen. I have tried every recovery out there but everytime I have to fastboot to be able to restore a 4.2.2 rom and get it to boot. Does anyone know how to fix this because it is very frustrating. I wipe everything when I install to. I follow the standard procedure and I am not new to rooting or flashing.
ajh305 said:
Every 4.3 rom I install after the first reboot it hangs at unlocked bootlaoder screen. I have tried every recovery out there but everytime I have to fastboot to be able to restore a 4.2.2 rom and get it to boot. Does anyone know how to fix this because it is very frustrating. I wipe everything when I install to. I follow the standard procedure and I am not new to rooting or flashing.
Click to expand...
Click to collapse
you tried 6.0.3.5 cwm also?
i had the same problem and this was the only one i could get to work.
bweN diorD said:
you tried 6.0.3.5 cwm also?
i had the same problem and this was the only one i could get to work.
Click to expand...
Click to collapse
Ya i tried every cwm including 6.0.3.6 and twrp 2.0.6.1
ajh305 said:
Ya i tried every cwm including 6.0.3.6 and twrp 2.0.6.1
Click to expand...
Click to collapse
not sure if it will help but this is the exact process i used:
-rts using matts utility found here http://batakang.com/dr_utility.php
-put stock recovery back on using the above utility
-root with the above utility and protect with voodoo
-take the ota to get the latest baseband back (will likely fail but still update the bb)
-restore root
-install cwm 6.0.3.5 from this utility http://www.mediafire.com/download/tt7cwwua49n24uv/Razr_HD_Recovery_Flasher_V7.rar
-flash your 4.3 rom of choice
-profit (hopefully lol)
ajh305 said:
Every 4.3 rom I install after the first reboot it hangs at unlocked bootlaoder screen. I have tried every recovery out there but everytime I have to fastboot to be able to restore a 4.2.2 rom and get it to boot. Does anyone know how to fix this because it is very frustrating. I wipe everything when I install to. I follow the standard procedure and I am not new to rooting or flashing.
Click to expand...
Click to collapse
keep in mind the second boot on 4.3 roms seems to take a while, how long is it hanging on the boot screen? I remember the first 4.3 I flashed hung for about 5-8 minutes before it booted up. it seems to be the second one that hangs consistently for me, but it does always boot. All following reboots after the 2nd are normal with no hangs.
bjoostema said:
keep in mind the second boot on 4.3 roms seems to take a while, how long is it hanging on the boot screen? I remember the first 4.3 I flashed hung for about 5-8 minutes before it booted up. it seems to be the second one that hangs consistently for me, but it does always boot. All following reboots after the 2nd are normal with no hangs.
Click to expand...
Click to collapse
I think I have waited for about 10 minutes before. I'll try again and see if it does actually boot. Does your hang on the bootloader unlocked screen or the boot animation screen?
EDIT: I tried another 4.3 rom and booted it up. Set some things up then updated su binaries and restarted and let it sit there at the unlocked bootloader warning for 15 minutes with no changes.
bweN diorD said:
not sure if it will help but this is the exact process i used:
-rts using matts utility found here http://batakang.com/dr_utility.php
-put stock recovery back on using the above utility
-root with the above utility and protect with voodoo
-take the ota to get the latest baseband back (will likely fail but still update the bb)
-restore root
-install cwm 6.0.3.5 from this utility http://www.mediafire.com/download/tt7cwwua49n24uv/Razr_HD_Recovery_Flasher_V7.rar
-flash your 4.3 rom of choice
-profit (hopefully lol)
Click to expand...
Click to collapse
I did actually restore it back to completely stock, recovery and everything. I downloaded the OTA after rooting and using voodoo. The update failed but I installed cwm 6.0.3.6 and then restored my backup. Then I flashed twrp 2.0.6.1 to try that and flashed a 4.3 rom and same issue came up.
ajh305 said:
I think I have waited for about 10 minutes before. I'll try again and see if it does actually boot. Does your hang on the bootloader unlocked screen or the boot animation screen?
Click to expand...
Click to collapse
Yeah, mine hangs at the bl unlocked screen on that second boot, though I flashed a different logo to get rid of that annoying message 10 minutes seems a bit excessive but not unheard of-longest I clocked was around 8. Does yours ever make it to the boot animation? If so, it should go into a full boot eventually. I think the hang has something to do with the rom building cache on that second boot Also, whichever 4.3 your using, I would make sure it's a more recent release as they have come a very far since the early releases which hung for longer periods of time. I'm currently running pa rc2 by cj and it went smoothly using cwm 6.0.3.2.
bjoostema said:
Yeah, mine hangs at the bl unlocked screen on that second boot, though I flashed a different logo to get rid of that annoying message 10 minutes seems a bit excessive but not unheard of-longest I clocked was around 8. Does yours ever make it to the boot animation? If so, it should go into a full boot eventually. I think the hang has something to do with the rom building cache on that second boot Also, whichever 4.3 your using, I would make sure it's a more recent release as they have come a very far since the early releases which hung for longer periods of time. I'm currently running pa rc2 by cj and it went smoothly using cwm 6.0.3.2.
Click to expand...
Click to collapse
It never reaches the boot animation just sits at that screen. I have tried several 4.3 roms within the last few days so they are the newest versions I can find. Could I clear the cache to get it to boot?
ajh305 said:
It never reaches the boot animation just sits at that screen. I have tried several 4.3 roms within the last few days so they are the newest versions I can find. Could I clear the cache to get it to boot?
Click to expand...
Click to collapse
http://www.droidrzr.com/index.php/topic/27682-having-issues-with-43-roms-is-it-me/ check out the last post on the page in that link. It seems to have worked for that guy. If you don't mind, try that and let me know if it works. In the meantime, I'm going to try and find some more solutions. I'm assuming his method worked, as he hasn't posted back.
bjoostema said:
http://www.droidrzr.com/index.php/topic/27682-having-issues-with-43-roms-is-it-me/ check out the last post on the page in that link. It seems to have worked for that guy. If you don't mind, try that and let me know if it works. In the meantime, I'm going to try and find some more solutions. I'm assuming his method worked, as he hasn't posted back.
Click to expand...
Click to collapse
By golly that worked! It booted up fast as well. It must lie with the formatting your internal storage before flashing the 4.3 rom. I tried something similiar to this but I was already on a 4.3 rom that wouldn't boot and I formatted the sd card then tried flashing it again and it booted again for the first time but wouldn't the second. So if your having trouble do this:
Restored stock 4.1.2 using Matt's utility
Rooted with Matt's utility
Put 4.3 rom and GAPPS on external SD
Fastboot flash CWM 6.0.3.5 (or install via Matt's utility if you like)
Wipe data/factory reset
Wipe Cache/Dalvik
Go to mounts/storage and format /data and /data/media (/sdcard) **Back up anything in your internal SD you want to keep before doing this!**
Flash 4.3 rom
Wipe Cache/dalvik
Flash GAPPS
Wipe Cache/dalvik
Boot up and setup rom
Reboot
ajh305 said:
By golly that worked! It booted up fast as well. It must lie with the formatting your internal storage before flashing the 4.3 rom. I tried something similiar to this but I was already on a 4.3 rom that wouldn't boot and I formatted the sd card then tried flashing it again and it booted again for the first time but wouldn't the second. So if your having trouble do this:
Restored stock 4.1.2 using Matt's utility
Rooted with Matt's utility
Put 4.3 rom and GAPPS on external SD
Fastboot flash CWM 6.0.3.5 (or install via Matt's utility if you like)
Wipe data/factory reset
Wipe Cache/Dalvik
Go to mounts/storage and format /data and /data/media (/sdcard) **Back up anything in your internal SD you want to keep before doing this!**
Flash 4.3 rom
Wipe Cache/dalvik
Flash GAPPS
Wipe Cache/dalvik
Boot up and setup rom
Reboot
Click to expand...
Click to collapse
Awesome man! I'm glad it booted up for you welcome to the 4.3 side!
ajh305 said:
I did actually restore it back to completely stock, recovery and everything. I downloaded the OTA after rooting and using voodoo. The update failed but I installed cwm 6.0.3.6 and then restored my backup. Then I flashed twrp 2.0.6.1 to try that and flashed a 4.3 rom and same issue came up.
Click to expand...
Click to collapse
glad you got it fixed but i have to ask, in the sequence above why are you restoring a backup? you should be going right from stock to 4.3. also, some people have issues with twrp and 4.3, thats why i suggested cwm.
I'm not sure why I restored the backup. I didn't think coming from stock would work for some reason.
Sent from my XT926 using xda app-developers app
I am having the same problem. I have followed the steps but still no joy . Any thoughts?
sgtslaughter64 said:
I am having the same problem. I have followed the steps but still no joy . Any thoughts?
Click to expand...
Click to collapse
This was the only thing that worked for me. You could maybe try updating to the most current recovery instead of the one listed.
the only 2 issues i have seen to cause this problem are covered in the post a few below, and fixed it every time. my only suggestion would be to install cwm after rooting, then reboot, then continue with the steps. just my preference, it may not matter.
thus I don't have OS anymore, so I can't boot into download mode.
I have TWRP, I think the only thing I can do is just get stock .zip ROM. But I can't find it for my G930F, I downloaded some but they are all prepared for odin, not for recovery.
Could please anyone give me a download link for a flashable stock rom?
Or any other ideas?
Thanks
You had TWRP but didn't make a backup?
Technically it doesn't have to be a stock ROM, you could just flash a custom ROM and once you've got system back then you can flash back to stock with Odin.
Beanvee7 said:
You had TWRP but didn't make a backup?
Technically it doesn't have to be a stock ROM, you could just flash a custom ROM and once you've got system back then you can flash back to stock with Odin.
Click to expand...
Click to collapse
So I do have LinkeageOS 16 installed now, but every restart, I can't mount /data in TWRP, I have to wipe it over and over. Why is that?
Another thing is that phone doesnt detect my SIM card (on stock recovery it did detect).
iirc that's something to do with encryption, but I've never experienced it so can't be sure.
Can you tried a stock Odin flash since installing Lineage?
Are you using the most recent TWRP?
Droiderat said:
Are you using the most recent TWRP?
Click to expand...
Click to collapse
I flashed newest stock ROM and updated twrp and everything seems to be working now
Weird, I didn't have to reflash LOS.
But yeah, I will write here if the problem still persists later.