Related
I posted this on a forum that I thought it applied to but the one answer I got did not work, I've done searches everywhere and have not seen a solution. There were a couple of similar problems for other phones but these fixes did not work for the infuse, so . . .
I Bought the infuse on day one. Installed Kies 2.0.0.11044_11_3. Phone not recognized, installed drivers, researched and learned the truth about Kies. Phone would not be recognized but at least installing Kies made the phone visible to the PC, so I knew I could root if I so desired, read up about rooting looked over the forums, learned my phone and finally thought I was ready. The phone had other plans.
Decided the other day that I was ready to root. Plugged in the phone but it no longer showed up in my PC running Windows 7 64 bit. Something about the phones compatibility with my system changed. Tried to install a newer version of Kies 2.2.1.11053_99_3 yesterday for the drivers, reinstalled drivers, activated USB debugging, plugged the phone in started up SuperOneClick and . . . still nothing happened. So I deactivated USB debugging and started over. Followed all the directions in the root posts and and SuperOneClick threads . . .
But somehow between day one and today my Windows 7 64 bit system does not know that the phone is plugged into it.
When I plug the phone into USB the phone asks me how I want to interact with the computer, Kies (Firmware Update); Media player: Mass storage. But the computer shows nothing. Device Manager doesn't list the phone, Windows Explorer doesn't show the phone, Devices and Printers window shows everything that's connected but NOT the phone, it's as if I plugged nothing into the computer. These places don't even show unknown device. The phone is charging so I know that it's plugged in, but it doesn't seem to be communicating with the PC. I've re-booted, re-installed, reviewed, rewired and re-alized that I have no clue what happened. (Tried different cables, different USB ports different times of the day)
It worked once upon a time, I tried rolling back restore points and disabling my kaspersky 2011, I've followed all rooting instructions in these threads to no avail.
Thinking about restoring phone to factory settings as a last resort. Got this reply in another thread (sorry about posting multiple threads, but I'm at wit's end.):
Try removing all instances of the Infuse coming in contact with your system using USBDeView. Also, how does it look in Disk Management? (Start button > search for "Computer Management" > Storage > Disk Management) Does the Infuse show up there as removable storage?
My answer: Tried it, didn't work, oh wait, didn't run USBDeView as administrator, re-tried as administrator and uninstalled all instances of Samsung i-997, then tried to plug the phone back in and still nothing.
Also not in Computer Management or Device manager either. Is there a way to uninstall any drivers that I have and then re-install them?
I did a factory reset, plugged the phone in and still nothing. Had to spend two days re-installing apps and re-configuring launchers . . .
I am now ready to hurl my phone out into traffic to see if that will help, but before I do I'm hoping someone here may have the answer I need.
. . . please . . .
If you are trying to root super one click will work. It worked on my infuse. First see if you can connect using mass storage. If you can access the files on your phone you are good. On win 7 64 bit it should just pop up to view the files. After that unmount and unplug the cable. Enable USB debugging and reconnect. Run super one click and it should work. Not every time does super one click work on the first run. I believe I had to unplug and reconnect a second time for it to work. But I did use super one click to root my phone. I was also using the drivers for the captivate at the time. If you need more help let me know.
Sent from my SAMSUNG-SGH-I997 using XDA App
FYI, drivers are NOT needed for USB mass storage, just to be clear.
Thanks for the reply, but that didn't work. I tried it exactly as you stated but it didn't "pop up" I ran SOC anyway and it got hung up "Waiting for device..." And a dos prompt window opened and just hung there.
SuperOneClick v1.9.5.0
Checking drivers...
Killing ADB Server...
OK
Starting ADB Server...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
OK
Waiting for device...
When I closed the Dos Prompt window it asked me if I was running OS 2.0 or higher. Wether I click yes or no I get this message:
OK
Getting OS Version...
Pushing psneuter...
error: device not found
FAILED
Thanks for the try, but still At wit's end . . .
it mattters
at least for me (win7 64bit) mass storage mode DOES require drivers. Or else PC just tries to load both SD cards as external drives. I had a hell of a time getting my laptop to recognize the phone. What worked for me was I ended up installing both kies and kies mini. when neither of those worked i tried the Samsung pcl connect and that didnt work. There was a link on the ATT site for usb drivers for it. A combination of both the samsung pc connect drivers and the ATT USB driver works for me. Must be something to do with win7 recognizing it as an MP3 player when in music mode and a EXT drive when is mass storage.
socialal said:
at least for me (win7 64bit) mass storage mode DOES require drivers. Or else PC just tries to load both SD cards as external drives. I had a hell of a time getting my laptop to recognize the phone. What worked for me was I ended up installing both kies and kies mini. when neither of those worked i tried the Samsung pcl connect and that didnt work. There was a link on the ATT site for usb drivers for it. A combination of both the samsung pc connect drivers and the ATT USB driver works for me. Must be something to do with win7 recognizing it as an MP3 player when in music mode and a EXT drive when is mass storage.
Click to expand...
Click to collapse
You just contradicted yourself there. The phone's SD cards appearing as external drives IS mass storage mode. Mass storage mode does not require drivers.
Appearing as an MP3 player uses the MTP protocol, which is NOT Mass Storage mode, which is why it does require drivers.
ADB also requires drivers.
http://www.samsung.com/us/support/downloads/SGH-I997ZKAATT
Thanks, but same problem. After installing these drivers, the phone just doesn't show when plugged in. The next thing is to find a Samsung store (or AT&T store) and see if there's something wrong with the phone's usb port.
Definitely one advantage of picking your phone up at a store... if possible.
My CSR played with the phone on the computer for 10 min., said he was transferring sim contacts.
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
i am having same problems
for the past year i have had a captivate and i have flashed it probably with every rom made by every developer here. i have flashed kernals modems you name it i have done it the phone was incredible i never had one problem till i got the infuse when i first got the phone i rooted it and had a lot of problems but after 5 or 6 hrs i finally was successful. i then could not get the phone to connect to my win 7 pc i then took out the mem card and put my roms on that then transfer them to my phone flash ect but to this day i can not get the pc to transfer files through usb. when i hook the phone up the drives show up but are faint then i connect usb on phone the drives become bold but when i try to transfer files or open drive in explorer the computer lags and the green bar slowly goes across the bar get to the almost end and locks up. my main concern is that there might be something wrong with the phone. at this point i cant even odin it back to factory. from what i have read it is more of a common problem than just one or two people. please help?
ps just flashed maxq-kk2-b10 and it rocks !!
Yeah I have all of the same problems. It must be this phone just has crap drivers.
Sometimes I get the PC to recognize the phone once. Then if I disconnect the phone for some reason then reconnect it is no longer recognized. I need to reboot the computer to get it to be recognized.
I have just come to the conclusion that Samsung's PC drivers are total rubbish for this phone.
Hi!
I have the same problem. I tried connect my infuse to 5 differend PC, with different cables, different OS, but still NOTHING. PC just didn`t know that phone is connected. As a result I can`t reflash it with ODIN or CWM, because for install CWM I need make root first, but Superoneclick didn`t see the phone also.
There is some way to make root on this phone WITHOUT connection to PC ?
try getting a new data cable, the charging part of the cable may still work but the data transfer part may have stopped working-(happened with my dads Atrix 4G after buying a new data cable for $6 at walmart the computer once again recognized it)
so go to your store of preference that sells electronic cables
buy a new data/charging cable-***MAKE SURE IT SAYS SOMETHING ABOUT DATA TRANSFER OR FILE TRANSFER!!!***
shouldn't cost more than $10 depending where you go-like i said my dad got one for $6 and his phone uses the same cable as my infuse...i think all smart phones use the same cable actually.
mg2195 said:
try getting a new data cable, the charging part of the cable may still work but the data transfer part may have stopped working-(happened with my dads Atrix 4G after buying a new data cable for $6 at walmart the computer once again recognized it)
so go to your store of preference that sells electronic cables
buy a new data/charging cable-***MAKE SURE IT SAYS SOMETHING ABOUT DATA TRANSFER OR FILE TRANSFER!!!***
shouldn't cost more than $10 depending where you go-like i said my dad got one for $6 and his phone uses the same cable as my infuse...i think all smart phones use the same cable actually.
Click to expand...
Click to collapse
This is 100% not data cable problem. not driver problem and not PC problem.
I am sure, because I have 2 Infuse and one of them work fine with the same stuff. This is something wrong with the phone hardware or software.
How can I root INFUSE without PC? There is some *.apk or scripts ?
I upgraded to Sky-ICS RC7.4 Speed yesterday and today. Obviously the USB mass storage was working earlier because I got the .zip file for the upgrade on the phone. Well, just a little while ago I tried to connect so I could pull those zip files off just to save some room and it won't connect.
I can charge the phone, the laptop(Windows 7) and the phone both make sound/vibrate when connected. BUT, with I go to "Connect storage to PC" it tells me to unplug the cable, which it hasn't before but I did it anyway. I unplug the cable press the connect button again it states to connect the cable, I do. Press the button to connect and I get the same result. I've tried enable USB debugging and try again and it states to disable, blah blah blah.
It's great that I can charge the phone via USB all day long but really sucky that I can't access any of my files via my laptop.
Anyone had this issue or know of any fixes that may alleviate this issue? I sure would appreciate your help.
FYI, USB drivers are installed on the laptop and reapplied after the the issue of not being able to connect USB mass storage...
update: I am able to see the two mounts in computer management on my Windows 7 machine but not able to access them through My Computer.
I was reading from other threads about a possible Windows issue, how I find it unlikely, but I did a system restore from an earlier date and that made no difference. It's still a matter of the phone connecting completely to the pc.
Also tried different ports and usb cables, no avail.
I could really use some input so that if need be I can access the files on the phone to either flash back to stock or at least modify the files I have on there now to let me be able to attach my mass storage. I'm liking the the rom it's just a few little things like this that are making me completely love it.
i have the same issue if i plug in to the front usb ports. no problems with the back and its only been since i updated to seans latest speed stripped ICS rom
I was having the same issues. I turned the phone off, took the battery out, and then restarted it. It worked.
mskiin said:
I was having the same issues. I turned the phone off, took the battery out, and then restarted it. It worked.
Click to expand...
Click to collapse
Correct; you need to reboot your phone because you probably connected / disconnected too fast and the phone is bugged out now.
I'm on 7.4 speed stripped and its working fine for me. Did you try installing the Samsung USB drivers exe in the dev forum?
Wont connect even on tablet
This is My also Case on my tablet. i cant connect to usb mass storage please help me what to do. icant remove the battery of my tablet and i only open it after 5 hrs so how?
kilopolki said:
This is My also Case on my tablet. i cant connect to usb mass storage please help me what to do. icant remove the battery of my tablet and i only open it after 5 hrs so how?
Click to expand...
Click to collapse
Now try in English.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta
Hi there. I've bought a Samsung Galaxy S4 Mini GT-I9195 few days ago and I want to be able to transfer files through my Samsung Micro USB cable. In order to do this, I need to install Kies and Samsung Drivers, which I did. I've connected my S4 Mini to the computer via the Micro USB cable. All I can see is the word "Connecting." I can only see my phone's name. I've waited several minutes but still no result.
I've researched online on how to fix this. Some say to install drivers so I've re-installed drivers, still no result. Others say to install the older version so I did. Still, I get this 'Connecting', message. Some people told me to turn off USB Debugging so I did but this made the phone undetectable. So I've turned it back on again. I've even downloaded some USB Mass Storage 3rd Party apps but it still doesn't work. When I plug in the micro usb cable to the computer via the phone, I can feel the phone vibrate but no detection. I've tried multiple computers but still it doesn't work. I've even rooted and downloaded 3rd Party mass storage apps (which requires root) but still it doesn't work. I have a Mirco SD Card. Could you please give me a solution? Thanks.
P.S. I don't want to transfer files over the WiFi as my router WiFi keeps on disconnecting loads of time. This is annoying and sooo slow especially when I'm trying to transfer large files. Please guys gimme a solution. I don't wanna return this phone as it's a much better upgrade from the iPhone 4S. Thanks.
barokut said:
Hi there. I've bought a Samsung Galaxy S4 Mini GT-I9195 few days ago and I want to be able to transfer files through my Samsung Micro USB cable. In order to do this, I need to install Kies and Samsung Drivers, which I did. I've connected my S4 Mini to the computer via the Micro USB cable. All I can see is the word "Connecting." I can only see my phone's name. I've waited several minutes but still no result.
I've researched online on how to fix this. Some say to install drivers so I've re-installed drivers, still no result. Others say to install the older version so I did. Still, I get this 'Connecting', message. Some people told me to turn off USB Debugging so I did but this made the phone undetectable. So I've turned it back on again. I've even downloaded some USB Mass Storage 3rd Party apps but it still doesn't work. When I plug in the micro usb cable to the computer via the phone, I can feel the phone vibrate but no detection. I've tried multiple computers but still it doesn't work. I've even rooted and downloaded 3rd Party mass storage apps (which requires root) but still it doesn't work. I have a Mirco SD Card. Could you please give me a solution? Thanks.
P.S. I don't want to transfer files over the WiFi as my router WiFi keeps on disconnecting loads of time. This is annoying and sooo slow especially when I'm trying to transfer large files. Please guys gimme a solution. I don't wanna return this phone as it's a much better upgrade from the iPhone 4S. Thanks.
Click to expand...
Click to collapse
Same here.... Didn't found a solution yet...
s4 usb connecting
barokut said:
Hi there. I've bought a Samsung Galaxy S4 Mini GT-I9195 few days ago and I want to be able to transfer files through my Samsung Micro USB cable. In order to do this, I need to install Kies and Samsung Drivers, which I did. I've connected my S4 Mini to the computer via the Micro USB cable. All I can see is the word "Connecting." I can only see my phone's name. I've waited several minutes but still no result.
I've researched online on how to fix this. Some say to install drivers so I've re-installed drivers, still no result. Others say to install the older version so I did. Still, I get this 'Connecting', message. Some people told me to turn off USB Debugging so I did but this made the phone undetectable. So I've turned it back on again. I've even downloaded some USB Mass Storage 3rd Party apps but it still doesn't work. When I plug in the micro usb cable to the computer via the phone, I can feel the phone vibrate but no detection. I've tried multiple computers but still it doesn't work. I've even rooted and downloaded 3rd Party mass storage apps (which requires root) but still it doesn't work. I have a Mirco SD Card. Could you please give me a solution? Thanks.
P.S. I don't want to transfer files over the WiFi as my router WiFi keeps on disconnecting loads of time. This is annoying and sooo slow especially when I'm trying to transfer large files. Please guys gimme a solution. I don't wanna return this phone as it's a much better upgrade from the iPhone 4S. Thanks.
Click to expand...
Click to collapse
i got this solution for you first plug you usb cable direct into motherboard port and then goto settings on phone tap more under data usage select tethering/hotspot and turn on usb tethering and therye you go computer should id now
solution found!!
forget about all kinds of "specialists", forget about those who are trying to sell you useless program to detect and fix usb port!. I had the same problem - my PC , my netbook didn't recognize my Galaxy s4 mini, I think after firmware update. Just remove the battery from your phone ,install it back and everything works!
grego1:victory:
I have a note 2 I currently use- when I plug the usb in - in windows 7 I get the option to view files etc....
I just bought a used sprint galaxy s5 from my ol ladys sister who had it hooked up at one of those corner wireless shops.
I want to root it but read to make sure your pc recognizes it first- which it does not.
Ive downloaded the latest usb drivers for the phone.
Ive enabled debugging mode.
Ive used the original supplied cord and also tried my note 2 cord.
When I plug it in it recognizes it and detects drivers but the phone does not show up under my computer and I dont get the window popup asking if I want to view files etc.
Getting really frustrated.
Any ideas?
deezdrama said:
I have a note 2 I currently use- when I plug the usb in - in windows 7 I get the option to view files etc....
I just bought a used sprint galaxy s5 from my ol ladys sister who had it hooked up at one of those corner wireless shops.
I want to root it but read to make sure your pc recognizes it first- which it does not.
Ive downloaded the latest usb drivers for the phone.
Ive enabled debugging mode.
Ive used the original supplied cord and also tried my note 2 cord.
When I plug it in it recognizes it and detects drivers but the phone does not show up under my computer and I dont get the window popup asking if I want to view files etc.
Getting really frustrated.
Any ideas?
Click to expand...
Click to collapse
When I plug the s5 into my pc and pull down the notification bar ...it doesnt even show usb connected.
I cant find any usb options other than usb debugging.
I just went through all this same crap with a galaxy mega a buddy had.
I just dont get why there is no "usb connected as" notification and why this is so complicated to connect to pc when my note connects fine
Bad cable? Maybe Bad Drivers? Where did you download them from? Windows is going to try to recognize it as a media device. Ill give you a couple tips
Just because the "popup window" doesnt popup, you probably just have auto play set to recognize it a certain way.
Just copy and paste this into your explorer window:
%windir%\system32\control.exe /name Microsoft.AutoPlay
and then reset it for your phone.
Also.
1. Make sure the cable is actually connecting, like charging the phone, consistantly, not on and off. If it is, then you know thats good, if not, switch the usb drive you have the cable plugged into. USB Ports actually on the motherboard are the ones Ive always had luck with never disconnecting.
2. If you want to root your phone, and you want the adb drivers, Windows wont find those for you.
Thanks for the reply.
I downloaded the drivers straight from the windows usb driver dowload page for my phone from samsung.
Ive uninstalled reboot,installed rebooted.
Ive set usb debugging off/on.
Tried dialling *#0808# which ive read is the code to enable usb but it doest work it just calls the #.
Tried all my moyherboard usb ports
Tried different cable
The original cable charges fine.
This sg5 NEVER has a usb icon when connected to usb... i find that odd.
A samsung mega a buddy had which was also previously hooked up at the same wireless shop that this s5 was..... also has the same exact issue.... no usb icon and not recognised as media by windows and no way to change usb settings.
Its like that wireless shop disabled usb on there phones for some reason.
I had the phone 2 weeks and cant do anything with it untill I can root it.
My note 2 works fine , i get usb icon in notification area,i can switch to media device from there.
On the sg5 theres no usb icon even though it connects fine to the pc as installer
Sent from my SCH-I605 using Tapatalk
Maybe Im misunderstanding you, but when I have my phone plugged into my pc there is no usb icon, its just connected as a media device and shows its charging. Both screenshots are of my phone while its plugged into my computer
When you plug it into your computer can you access the files on the phone through your windows explorer, like in the first screenshot?
Thanks for replying and the screenshots.
When my phone is plugged into the computer it shows the charging status but no "connected as media device" it doesnt show a connected as anything so nothing to touch for options.
The phone does not show up under windows explorer in my computer.
Ive been using galaxy phones since the original galaxy and never had issues like this.
I just dont get it
I'm similar issues...my phone will just time out in the middle of transfers or won't see the phone at all
Both of your issues sound like driver issues. Heres the link from Samsung for Windows for the S5
http://www.samsung.com/us/support/owners/product/SM-G900PZKASPR
To make this issue stranger....
My neighbor came over to borrow juice for her ecig. I noticed she has an s5.
I ask if i can connect it to my computer and as soon as I plug it in with my s5 cable...bam ...connected as media device , touch for usb options.
And my computer brought up the screen to view files.
So i now know its not my pc,drivers, or cables.
I did however notice when I plugged my s5 in.... in the notification area where it would say touch for usb options.
It says "system update"
But i have no sim or service on the phone so it doesnt update.
Could the system update be needed for the usb to work?
How would i even update system ?its nolonger on sprint. I wouldnt want any more over the air updates anyway as im wanted to root so i can save a straight talk apn and probablly flash a custom rom
Yea... this is nuts.
This sprint s5 i got looks and performs like a brand new phone.
But cannot for the life of me get "connected as ......" to show when a usb is plugged in. When i search settings for "pc connection" , "media" , mtp" , usb" etc.....
Theres nothing I can find to enable how to connect when usb is connected.
I dont even know who or where to ask anymore.
Bought this phone weeks ago and cant do anything with it.
My neighbors s5 connects to my pc no problems. So does my note 2.
I just dont know anymore what else to do
i dont see where not having a sim would matter. does the usb port on your phone seem loose or anything? do you have access to another pc to try connecting to that?
ultimately you can get around most things that require needing a usb connection. theres even a wireless adb.
i doubt this will work either, but have you tried seeing if odin will recognize the phone in download mode? (power off the phone and press the power+home+volume down buttons)
also what version of android is on the phone now? if its still on 4.4.2 or 4.4.4 then you might want to look into towelroot, but i think i remember reading thats not working with 5.0
as for rooting, you could try looking for a flashable update.zip , put it on a external sd card, put that in your phone and boot into recovery (power off the phone and press the power+home+volume up buttons) and flash it, then find a custom recovery like clockworkmod or philz touch or something
all in all im 99% sure theres a way to root the phone without having to do anything on a pc, its just a matter of finding a way to do it, and the before choosing a method to tell you to try, i need to know the android version. also im just assuming the model number is SM-G900P, is that right?
Go into your settings and tell me the
Software Version
Model Number
Android Version
and the Baseband Version
once factory reset...usb works fine.
Im now rooted and flashed MOAR
thanks for all who tried to help
Glad you got it figured out
My computer for some reason reminded itself of not recognizing my Idol 3 5'5 6045k. Two days ago it was all fine and now everytime i connect it to the computer it only charges. I've tried everything from changing usb cables to unistalling andthen installing the device drivers, enabling debugging, restaring either smartphone and computer. Everything I can think of. Please help me out, I'm trying to root the smartphone and without it recognizing I can't do anything, not even transfer files. :crying:
sdfg said:
My computer for some reason reminded itself of not recognizing my Idol 3 5'5 6045k. Two days ago it was all fine and now everytime i connect it to the computer it only charges. I've tried everything from changing usb cables to unistalling andthen installing the device drivers, enabling debugging, restaring either smartphone and computer. Everything I can think of. Please help me out, I'm trying to root the smartphone and without it recognizing I can't do anything, not even transfer files. :crying:
Click to expand...
Click to collapse
Obvious Question #1: Did you check the phone notification dropdown area to verify the phone is in MTP or PTP mode so it will show up on the pc? As for transfering files...you do have the option of loading up a microsd card with whatever files or installing a wifi adb app to connect wirelessly. You could even use an app like airdroid to let you do all sorts of things.
famewolf said:
Obvious Question #1: Did you check the phone notification dropdown area to verify the phone is in MTP or PTP mode so it will show up on the pc? As for transfering files...you do have the option of loading up a microsd card with whatever files or installing a wifi adb app to connect wirelessly. You could even use an app like airdroid to let you do all sorts of things.
Click to expand...
Click to collapse
Therre's no notification after connecting the usb, it just charges the phone, seriously, I've tried everything to enable MTP but nothing does the job. And what do you mean by using an adb app? Can I root my smartphone by a wireless connection?
sdfg said:
Therre's no notification after connecting the usb, it just charges the phone, seriously, I've tried everything to enable MTP but nothing does the job. And what do you mean by using an adb app? Can I root my smartphone by a wireless connection?
Click to expand...
Click to collapse
You are overcomplicating things. 1st...there is ALWAYS a notification in the dropdown that says what mode the phone is in....mtp, ptp, charge only or "cdrom mode" which installs the usb drivers. Pressing on that notification allows you to change the mode the device is in.
As for rooting....all you need to do that is to flash or boot TWRP (details on booting it are in the system image thread) and then flash the supersu zip from inside twrp to your device...reboot and done...but I think in the newer TWRP's they even offer options to root automatically...ie the zip is already built in. After rebooting to your phone you install the supersu apk from google play so you can configure what apps have superuser access.
famewolf said:
You are overcomplicating things. 1st...there is ALWAYS a notification in the dropdown that says what mode the phone is in....mtp, ptp, charge only or "cdrom mode" which installs the usb drivers. Pressing on that notification allows you to change the mode the device is in.
As for rooting....all you need to do that is to flash or boot TWRP (details on booting it are in the system image thread) and then flash the supersu zip from inside twrp to your device...reboot and done...but I think in the newer TWRP's they even offer options to root automatically...ie the zip is already built in. After rebooting to your phone you install the supersu apk from google play so you can configure what apps have superuser access.
Click to expand...
Click to collapse
I'm telling you, everytime i try to connect my smartphone to the pc nothing shows up, i only notice the device is charging, there's no option anywhere to change it to MTP or Camera or CD ROM... And I've tried 2 different pc's
sdfg said:
I'm telling you, everytime i try to connect my smartphone to the pc nothing shows up, i only notice the device is charging, there's no option anywhere to change it to MTP or Camera or CD ROM... And I've tried 2 different pc's
Click to expand...
Click to collapse
Your telling me when the phone is plugged into the pc you don't see the notifications below or some version of them at all? If so then you need to fully uninstall the devices in device manager including remove the drivers...then use the drivers in the system image thread (since you obviously can't use the ones from "cd rom mode" which would be the best solution). USB debugging isn't even an issue yet...your phone should still show up to the pc as a camera device (ptp) under just about ANY scenario using even built in windows drivers.
famewolf said:
Your telling me when the phone is plugged into the pc you don't see the notifications below or some version of them at all? If so then you need to fully uninstall the devices in device manager including remove the drivers...then use the drivers in the system image thread (since you obviously can't use the ones from "cd rom mode" which would be the best solution). USB debugging isn't even an issue yet...your phone should still show up to the pc as a camera device (ptp) under just about ANY scenario using even built in windows drivers.
Click to expand...
Click to collapse
Thanks for all those tips, but I already tried that out aswell, 2 times to be precise, deleted all the drivers, rebooted pc and smartphone, tried different cables, but still nothing ever occurs.
sdfg said:
Thanks for all those tips, but I already tried that out aswell, 2 times to be precise, deleted all the drivers, rebooted pc and smartphone, tried different cables, but still nothing ever occurs.
Click to expand...
Click to collapse
Have you tried a different cable? Perhaps that one is damaged or is only setup for charging? Only thing I can think of.
And then I realize you mentioned that Not sure what else would prevent it from giving you those options.
I'm also facing similar issue after the 2 update. Were you able to fix this?
http://askubuntu.com/questions/681959/ubuntu-14-04-15-10-android-file-access-issue?s=2|0.2054
Which kind of USB cable(s) have you tried specifically? Were they cheap eBay/generic kinds or well known branded ones?
Something as little as a Micro USB cable can cure a lot of problems. It needs to be a well built one by a known manufacturer to avoid problems.
brian117 said:
Which kind of USB cable(s) have you tried specifically? Were they cheap eBay/generic kinds or well known branded ones?
Something as little as a Micro USB cable can cure a lot of problems. It needs to be a well built one by a known manufacturer to avoid problems.
Click to expand...
Click to collapse
Actually I've been having pretty good luck with the $1 ones from Dollar Tree but the key is certainly to try multiple cables....on some the microusb plug will make it difficult to get a solid connection especially if you have a case on the phone.
You may be missing the point of "trying" different cables. It's not so much the "quality" of the cable, it's the fact that some cables are for "power only", and "will not" transfer data, regardless of how hard you try.
You need to be using a "proven" data/power cable, otherwise your beating your head against the table for nothing.
Just to add, I put a piece of red tape on all my usb cables that are power only, no guess work.
I own idol3/moto g 2015 and s3, have no problem with other 2 device. I'm having this MTP issue after the UE40 update. Verified in all 3 OS, adb is detecting the device but not MTP/PTP. Idol3 support is not worthy responses.
http://forum.xda-developers.com/idol-3/general/mtp-issue-ue40-update-t3182564
http://askubuntu.com/questions/681959/ubuntu-14-04-15-10-android-file-access-issue
KashRaman said:
I own idol3/moto g 2015 and s3, have no problem with other 2 device. I'm having this MTP issue after the UE40 update. Verified in all 3 OS, adb is detecting the device but not MTP/PTP. Idol3 support is not worthy responses.
http://forum.xda-developers.com/idol-3/general/mtp-issue-ue40-update-t3182564
http://askubuntu.com/questions/681959/ubuntu-14-04-15-10-android-file-access-issue
Click to expand...
Click to collapse
Well, USB works fine here, and I've had 5 different rom's, 2 Canadian, 2 US, and the Chinese rom, on this phone without any USB issues, sorry, can't help any further.
After a complete wipe and restore, it worked.
sdfg said:
My computer for some reason reminded itself of not recognizing my Idol 3 5'5 6045k. Two days ago it was all fine and now everytime i connect it to the computer it only charges. I've tried everything from changing usb cables to unistalling andthen installing the device drivers, enabling debugging, restaring either smartphone and computer. Everything I can think of. Please help me out, I'm trying to root the smartphone and without it recognizing I can't do anything, not even transfer files. :crying:
Click to expand...
Click to collapse
I had the same problem as well. It only showed charging when I plugged in the USB cable. Tried switching cables, turning off and on USB debugging but nothing worked. I finally just rebooted the phone and then it worked again. Strange that it suddenly stopped.
I have a different issue; the different USB modes work fine but I don't have the 'cdrom' option in the USB mode dialog. I've tried various Alcatel ADB drivers that I have found and none are working, using Win7 64. My Idol 3 4.7 is 6039I (US).
Answered my own question, simply install the Mobile Upgrade Q software.
nope, doesn't show up. it's a bug. i had it before, googled until i found a fix and got it working, now it's back to not being recognized. nothing shows on drop down menu.