[Q] Android Recovery System, shows just folders, no files - General Questions and Answers

Hi everybody
I have Fujitsu M532 tablet, when i tried to install WiFix from flash zip file, I started it in Recovery mode (by pressing power and volume just after green logo shown on startup), I then selected update from external storage, a list of FOLDERS of SDCard has been shown to me but no FILES shown!
I checked each folder, but files in sub folders did not shown too.
I tried to format SDCard, but nothing changed
Please help me!

Related

[Q] help w/ clockworkmod

Hi everyone, I'm a new android/gtab user and looking for some help with installing clockworkmod. I've followed some instructions from this web site. It looks like the installation goes through successfully because I see "Detect a recovery key pressed" followed by "Booting recovery kernel image" after pressing Power and Vol+. A package gets installed and the device reboots normally. they I power down again and try to enter clockworkmod by pressing the Power and Vol+ again and it just keeps doing the same thing over and over. I have in my root the update.zip file and a recovery folder. Am I supposed to delete these after installing? Any help is greatly appreciated.
Thanks!
B
baoweezy said:
Hi everyone, I'm a new android/gtab user and looking for some help with installing clockworkmod. I've followed some instructions from this web site. It looks like the installation goes through successfully because I see "Detect a recovery key pressed" followed by "Booting recovery kernel image" after pressing Power and Vol+. A package gets installed and the device reboots normally. they I power down again and try to enter clockworkmod by pressing the Power and Vol+ again and it just keeps doing the same thing over and over. I have in my root the update.zip file and a recovery folder. Am I supposed to delete these after installing? Any help is greatly appreciated.
Thanks!
B
Click to expand...
Click to collapse
Read this carefully
http://forum.xda-developers.com/showthread.php?t=892090
Once the tablet boots once it deletes the command file in the recovery folder
Thanks, I've read it through and had the files on the internal SD card exactly as the image in the link shows. I get the message in the upper left corner saying "Detect a Recovery Key Pressed", and then a 2nd line that reads "Recovery Image Detected. After that I see the cardboard box. The tablet then reboots as normal and I do not see any signs of a clockworkmod menu. Can I use the built in data erase function to restore it back to factory conditions and start over? I have rooted it with z4root.
-B
baoweezy said:
Thanks, I've read it through and had the files on the internal SD card exactly as the image in the link shows. I get the message in the upper left corner saying "Detect a Recovery Key Pressed", and then a 2nd line that reads "Recovery Image Detected. After that I see the cardboard box. The tablet then reboots as normal and I do not see any signs of a clockworkmod menu. Can I use the built in data erase function to restore it back to factory conditions and start over? I have rooted it with z4root.
-B
Click to expand...
Click to collapse
If you are installing from the internal sdcard make sure the line in the "command" file says "SDCARD" not "SDCARD2"
/sdcard/update.zip
/sdcard/recovery/command
The command file deletes every time you boot into recovery even if it doesn't install cwm. Make sure the file is there and pointing to the right sdcard.
You have to reboot after installing to get into the clockwork menu. Power/Vol+. If it doesn't go to cwm recovery it is not installed
Thank you very much! That did it! I did read your suggested link carefully but I guess I just didn't understand it enough to really "get it"
Thanks again!
B
i hate to start this up again but i'm having the same issue and followed the steps from the other thread about cwm and roms.. to my understanding i followed the instructions and downloaded the file then exstracted it and putting the update.zip file & recovery fold on my enternal sd card but each time i do this it boots up and the two lines of txt appear but once i delete the folders and push the pwr & vol + buttons it just boots up normal again. i think i may be doing something wrong while labeling the files but i've done this at least 8 times already and no dice.. i'm at the point of returning it if i cant manage to get this to work unfortunately i was so excited to get this tablet with such high hopes but now its just a head ache, well if anyone wouldn't mind to give me some pointers, i would be greatly thankful.
jalladi said:
i hate to start this up again but i'm having the same issue and followed the steps from the other thread about cwm and roms.. to my understanding i followed the instructions and downloaded the file then exstracted it and putting the update.zip file & recovery fold on my enternal sd card but each time i do this it boots up and the two lines of txt appear but once i delete the folders and push the pwr & vol + buttons it just boots up normal again. i think i may be doing something wrong while labeling the files but i've done this at least 8 times already and no dice.. i'm at the point of returning it if i cant manage to get this to work unfortunately i was so excited to get this tablet with such high hopes but now its just a head ache, well if anyone wouldn't mind to give me some pointers, i would be greatly thankful.
Click to expand...
Click to collapse
Read this carefully..If you don't have the command file pointing to the correct sdcard it won't install.
http://forum.xda-developers.com/showthread.php?t=892090
Just the first post
SDCARD!
Jalladi,
That is exactly what mine was doing until I edited the COMMAND file that is in the Recovery folder. In my case, I installed CWM on my internal card. After editing the COMMAND file to point to SDCARD instead of SDCARD2, it worked correctly. I used Notepad in Windows to edit the file while connected to my laptop.
Good luck!
Thanks for this forum, worked like a charm. FYI the command file does not have an extension (ie .txt).
I'm sorry I still don't understand, I'm trying to install on the internal card, but just keeps restarting. I see the recovery folder with command file. It doesn't have anything about sdcard or sdcard2. What do I do with the file to correct?
Thank you for your help!!
daveconner98 said:
I'm sorry I still don't understand, I'm trying to install on the internal card, but just keeps restarting. I see the recovery folder with command file. It doesn't have anything about sdcard or sdcard2. What do I do with the file to correct?
Thank you for your help!!
Click to expand...
Click to collapse
When you download CWM, you extract the contents of the file. The contents are an update.zip file and a recovery folder with a command file in there (no extension on the command file at all). The command file will have only one of the two lines below, depending on where you are installing from:
--update_package=SDCARD:/update.zip
--update_package=SDCARD2:/update.zip
SDCARD is the internal memory of the tablet, whereas SDCARD2 is the MicroSD card that you have in the SD Slot on the side of the tablet. The update.zip file and recovery folder with the command file inside of it should be placed on the root location of either your internal memory or your MicroSD card. I hope this helps. Good luck.

[Q] First Time Flasher - Stuck, what's next?

Heya! I've followed the install instructions in this thread;
http://forum.xda-developers.com/showthread.php?t=1997251
I got to step 5, "enter recovery, on boot led will be violet for 3'', during this period press vol+ ".
I wasn't quick enough on pressing the volume button so it started loading wich didnt do much good i noticed after a while. (stuck on loading)
Soo, i removed my battery to restart the phone, after wich i managed to enter recovery mode only to find myself not knowing how to execute #6, "flash rom zip".
I tried this aswell;
"1) enter recovery at first : after u switch on d phone, when the pink light comes, press up volume key to enter recovery
2) connect your phone to computer using usb cable
3) go to mounts and storage and mount /system and /data.....this will enable ADB in recovery mode
4) now put ur rom zip in the ADB folder of ur computer and start adb and type "adb devices" (without the quotes)
5) if it shows some sort of numbers, then the device is connected successfully
6) in adb. type "adb push /ROM.zip /sdcard" (without the quotes) (ROM.zip is the name of the rom)
7) then reboot recovery, go to flash zip and chose the rom zip and enjoy!"
I fail at #5, since it wont show any numbers. It wont find the device. Many hours of googling and trying different things the result is the same, and im stuck with a phone that wont boot to OS.
What do i do now? Any help appreciated! :victory:
In recovery mode,
Install zip form SD card > install zip from external SD card (if you have put the downloaded zip in your external SD card)
Oh you have to press volume up and down to highlight option, and power button to select it.
Hit Thanks if I helped you!
satan89 said:
In recovery mode,
Install zip form SD card > install zip from external SD card (if you have put the downloaded zip in your external SD card)
Oh you have to press volume up and down to highlight option, and power button to select it.
Hit Thanks if I helped you!
Click to expand...
Click to collapse
My options is as follows;
1. Choose zip from sdcard (i can only access the Tipo internal memory from here, not my removable SD)
2. Apply /sdcard/update.zip
3. Toggle signature verification
4. Back
I can't access my phone storage from my PC either, since the drives wont show. I've tried all drives and such that i've found, but nothing works.
Is there any way i can reverse what i have done (remove clockwork or such) to get my phone to boot again?
Or a way to access my memory, so i can add the zip to the internal storage?
Have i bricked my phone?
Thanks!
You have not bricked your phone. relax.
Well you have to select first option, then under that there should be another line saying 'select zip from external SD card ' or something like that (if I remember correctly) . If that does not work there is a workaround where you use push file via adb. I'm not too familiar with that but will pm you if I find out where I read it.
And now- to revert back,
Download the world fs ftf file found here (its rootable) -
http://forum.xda-developers.com/showthread.php?t=2001567
Download flashtool latest (search) and install (fastboot and flash drivers in particular)
Place downloaded ftf file in c/flashtool /firmware
press flash and follow instructions.
Your on stock fw now. Remember to place zip in internal card if you are attempting cm10 again
Hit Thanks if I helped you!
Woo, somehow i managed to install the stuff! It wont send sound to my headphones though, other then that it's all good.
Thanks for taking your time!

[Q] Cannot get SD card to work using Blaze 4g with CyanogenMod 11

Hi all,
I recently upgraded my Blaze to CyanogenMod (v11 nightly), now my apps (Camera, Swiftkey, etc.) do not recognize my SD card. I was running stock before this.
In File Manager:
- I can view the external sd card at \storage\sdcard1.
- It appears there is an internal sd card as well at \storage\sdcard0
- There is a folder called \sdcard which appears to link to \storage\sdcard0
- There is a folder called \external_sd which links to \storage\sdcard1
- sdcard0 is empty
I believe this to be a mounting issue, but if it is I cannot figure out the correct mount command in terminal emulator. Thanks for your help in advance.
I know this is nearly a year later, but I ran into this exact same problem while trying to flash an old phone. I was fortunately able to figure out to fix it, and I'm posting this for the sake of anyone else who might have trouble with it as well.
I initially noticed the problem while attempting to download and open files, which kept giving me an error that the files couldn't be located. Using a file manager, I noticed the directories that the OP described above. I believe the internal storage for the Blaze is 4GB, which is partitioned into two parts: one for app data, and the other for user downloads, pictures, etc. I realized that I only saw one of the partitions being displayed on the storage settings screen. Connecting via USB to my computer didn't show any internal storage; I couldn't access any files from the phone besides the ones on my external microSD card.
I booted into my previously-installed ClockworkMod v6.0.4.8 (by holding the volume keys + power, letting go of power after the Samsung splash screen) and went into the 'mounts and storage 'menu, scrolled down, and clicked on the 'mount USB storage' option while connected to my computer. Surprisingly, the internal storage was recognized (specifically the partition containing user data) and I was able to pull all of my files from there that I thought I previously wiped when I went to flash Cyanogenmod 10.2. Somehow, those files were still retained. Now, I'm not exactly sure what happened, but I think all this previous data, which didn't get wiped, prevented the new ROM from mounting this partition (sdcard0), and perhaps led to a path/directory issue when I went to download and open things from it. For some reason, as the OP noted, the sdcard0 storage showed up as empty when I used a file manager app to look inside.
I deleted the files from this mounted storage via my computer, then went back to the 'mounts and storage menu' and formatted the /storage/sdcard0 storage with the 'default' setting to wipe that partition. Then, I wiped user data, cache, and dalvik cache, and let my phone reboot. I did not reflash Cyanogenmod 10.2 after, and I was able to boot into my phone and setup my phone. (I'm not sure if you have to reflash your ROM, but I was able to boot up to a fresh setup without it). I am now able to see both internal storage partitions displayed on my storage setting, use a file manager to see the files in sdcard0, and download and open files.
Hope this helps.

Please help I'm in big trouble.. stuck in TWRP, Wiped, can't find recovery files.

I was using the resurrection remix rom, and needed to do an update, so I did what it said and downloaded the files I needed, saved them to my micro SD card in a folder I created and named "root". I did the wipe and erased everything following the instructions on that page, and now I'm trying to install the files so I can flash them and that root folder is not showing up! Nothing is showing up in my sd directory. I have two directories; one says sdcard, and the other is named external_SD. Inside the external_SD folder is a LOST.DIR file that's completely empty. Inside the sdcard folder is a TWRP file which is also empty and I'm freaking out now because I don't know how to get to my SD card. Everything is saved to my sd card and I have no access to the files I need and my phone is wiped now and doesn't have a rom installed and I have no idea or way to get a rom installed now. I don't know what to do and I'm panicking. If anyone knows what to do in this situation I will be eternally grateful.
I was able to get into download mode and use Odin to install factory firmware. This issue has been fixed.

Problem after Flash rom

Hi guys,
I tryed flash a custom Rom, but my mate enter in Huawei erecovery and after the connection with wifi I have an error and don't continue. I try return Stock Rom but i can't copy the Update.app file By pc ( i have The error that the device is probably disconnected) but i move the file from the external sd card to internal sdcard by twrp recovery '' file Explorer''. I Start the Installation of custom with press vol up+vol down+power but after 10 seconds i get an error and can only restart device. Anyone can help me please?
John46 said:
Hi guys,
I tryed flash a custom Rom, but my mate enter in Huawei erecovery and after the connection with wifi I have an error and don't continue. I try return Stock Rom but i can't copy the Update.app file By pc ( i have The error that the device is probably disconnected) but i move the file from the external sd card to internal sdcard by twrp recovery '' file Explorer''. I Start the Installation of custom with press vol up+vol down+power but after 10 seconds i get an error and can only restart device. Anyone can help me please?
Click to expand...
Click to collapse
As long as the update.app you're trying is for offline use it should be placed in external sd:/dload/
OK now I flash a custom rom but I see a little problem. Using the file Explorer I don't see all classic folders of android (download, document, etc..) I have 12 folders strange name all numbers and letters without sense.
John46 said:
OK now I flash a custom rom but I see a little problem. Using the file Explorer I don't see all classic folders of android (download, document, etc..) I have 12 folders strange name all numbers and letters without sense.
Click to expand...
Click to collapse
It's because you're encrypted.
And how can solve this problem?

Categories

Resources