Related
Ok, i've had a problem with it, first i removed the protector that was as large as the device and made the screen very ugly, then i got the one from the box and putted it on, every air-bulb was gone when i kept rubbing etc.
1 stayed, under that bulb there was something white, i found out it was a 'piece' of dust.
It was kind of annoying so i removed the screen-protector, now when im trying to put it on i get lots of 'dust-bubbles',
Anyone has an idea of how to do it or should i just leave my diamond without the screen protector?
Protection
Personally i prefer to have a screenprotecter on my device. I can recommend invisible shield. its very durable and will not be scratched. check it out on www.zagg.com
If you remove the protector, then there will alway be dust next time, because the dust get stuck to the protector glue. (I have also remove mine several times)
I have tried zagg, but I can't recommend it. It is a little sticky (which they also says on their homepage) and I don't like that. The floating feeling is gone. It is also not that invisible.
I have selected to buy a new original protector, and will use that.
The trick to get it on without bobbles is to start on the long edge and then slowly add it. (Keep the 'paper' on as long a possible).
(Michael
willyy1991 said:
Ok, i've had a problem with it, first i removed the protector that was as large as the device and made the screen very ugly, then i got the one from the box and putted it on, every air-bulb was gone when i kept rubbing etc.
1 stayed, under that bulb there was something white, i found out it was a 'piece' of dust.
It was kind of annoying so i removed the screen-protector, now when im trying to put it on i get lots of 'dust-bubbles',
Anyone has an idea of how to do it or should i just leave my diamond without the screen protector?
Click to expand...
Click to collapse
The original is washable. Wash it and dry it with a paper towel that sucks in the water bubbles, wipe dry and clean your screen and reapply it.
By the way, this goes to Accessories forum.
mhfalken said:
If you remove the protector, then there will alway be dust next time, because the dust get stuck to the protector glue. (I have also remove mine several times)
I have tried zagg, but I can't recommend it. It is a little sticky (which they also says on their homepage) and I don't like that. The floating feeling is gone. It is also not that invisible.
I have selected to buy a new original protector, and will use that.
The trick to get it on without bobbles is to start on the long edge and then slowly add it. (Keep the 'paper' on as long a possible).
(Michael
Click to expand...
Click to collapse
Where can you buy a new one, i need it really fast because my phone is without protection right now and no i am affraid of pressing it to hard to leave a permanent mark..
tnyynt said:
The original is washable. Wash it and dry it with a paper towel that sucks in the water bubbles, wipe dry and clean your screen and reapply it.
By the way, this goes to Accessories forum.
Click to expand...
Click to collapse
I did this and the dust keeps coming at the protector and my phone and there will be bubles because the dust gives it a 'height-problem'..
I bought invisible shield for mine, its pretty nice after say 4 days from install.
For first 2 days it might seem really bad but it gets much better.
I somehow scratched it without even noticing it, so I sent picture to zagg and they sent me new one. Even though scratch was very minor.
mhf
hi. this my first post on this web site
excuse me for my bad english
i have a diamond and i remove orginal screen protecter because i write sms with letter recorgnizer and the area that i write words on the screen become white and scratch. i remove orginal and buy a new one that for iphone. i cut it for my phone size and apply it. its sooo much stiky and i have a problem like orginal one.i wnat to remove it and when i do it a tiny layer of glue stand on my diamond screen. i can't clean it. and it give a bad scene to my diamond.
what's your idea. i give u a pichture from my diamond screen.
Perhaps you could use isopropyl alcohol, usually it will remove glue without damaging the plastics surface (in that case: your display). DON'T USE nail polish remover, acetone or even benzine, it will remove the glue too - but your display would look "milky". You can get isopropyl alcohol at the pharmacy.
Tell us if that helped you
mhf said:
hi. this my first post on this web site
excuse me for my bad english
i have a diamond and i remove orginal screen protecter because i write sms with letter recorgnizer and the area that i write words on the screen become white and scratch. i remove orginal and buy a new one that for iphone. i cut it for my phone size and apply it. its sooo much stiky and i have a problem like orginal one.i wnat to remove it and when i do it a tiny layer of glue stand on my diamond screen. i can't clean it. and it give a bad scene to my diamond.
what's your idea. i give u a pichture from my diamond screen.
Click to expand...
Click to collapse
You might be interested in this thread: http://forum.xda-developers.com/showthread.php?t=421229
I didn't get a screen protector with mine... I mean, I had a shipment protector with a little tab for peeling off, but nothing came with it for long term use. It's a Sprint, did they just not include one?
the exim screen protector is very good and smooth
I always use the Brando screenprotectors. See their online shop. They ship worldwide for only $ 3,00 shippingcosts.
It is very easy to install, easy to clean, 100% garanteed scratch free and very durable.
iixnullxii said:
I didn't get a screen protector with mine... I mean, I had a shipment protector with a little tab for peeling off, but nothing came with it for long term use. It's a Sprint, did they just not include one?
Click to expand...
Click to collapse
I've got a Sprint Diamond too, and didn't think I got a protector either, but it was in the separate bag that has the manuals. It should have come with one...Wish it woulda come with an extra one too, oh well.
I had the same problem with misalignment and dust bubbles with the HTC protector on my first few tries...i did however fix the problem...
Take the protector off and clean off the phone...use a microfiber cloth to get all the dust and oil off...after its super clean...take the protector and wash it off with some mild soap...rub the soap in with your fingers and get it clean. Be sure to note which side is down. After its clean, hold it around the edges and let the water bead off...i blew on the protector to get residual water off...some water is ok...actually helps with the install...the basically carefully apply it still holding the sides making sure not to leave finger prints. Start from the top and work your way down... i used a credit card pushed against the microfiber cloth to squeegie the protector down...be carefull with the few drops of water. After you have it down...there might be little bubbles or what looks like water spots where water is trapped under the screen...dont worry...just use your phone and leave it alone. Once it heats up from the excessive phone use it will start to dry up and the protector will come out very nice and smooth. Mine is flawless and i did the wash with soap apply and remove at least 3 or 4 times to get it right...Just be patient
I use screen protector from martinfields, what do you say about, anyone have one??
I think the best in market
My HTC one got a nasty scratch in it last week, so I ordered a Martin Fields.
It arrived this morning and I've got it on without any problems. So far I've noticed:
- It's not a perfect fit like the HTC one was. The hole for the speaker at the top is larger than the hole in the phone. It's not bad though.
- The visibility of the screen does seem better than the HTC protector, but I don't know if it's just the placebo effect of having a more expensive protector.
- It was _easy_ to put on, no bubbles at all
- The protector for the bottom buttons is awful. The circle is just the right size to completely hinder using the touch wheel and it's obvious that you've got a piece of plastic on there.
- It seems smoother than the original HTC one when using the stylus.
So far I'm impressed with it. I didn't bother with the camera hole or bottom hard buttons. The in box HTC one was fine for me, but when I got a scratch on it (my stylus somehow developed a sharp edge), it annoyed me.
I'm using the one supplied as standard with a uk CompactIV and it's great- you can hardly tell it's thereand the sensitivity seems fine.
I have 24 diamond screen protectors. Because i bought 24 diamonds and sold them all without screen protectors so i am sorted untill i buy another phone.
After using the martin fields one for a couple of days, I think it's great.
The screen looks much brighter and clearer through it (I thought the HTC one was great, but I do notice the difference). Plus the smoothness is brilliant, theres pretty much no friction for the stylus or fingers
where can i purchase the htc screen protector? the original that comes in the box...
Hey!
Well today I got my first scratch that is visible with the screen turned on. I heard that you can remove scratches with a product called 'Brasso', but I was wondering if this will cause more damage to my screen. Is it safe to use on my phone? And will it damage my screen more?
Thanks in advance!
I thought Brasso was for cleaning metal, I didn't know it had any effect on plastic.
In the past I have taken scratches out of plastic with both Jewellers Rouge (a fine white powder used to take scratches out of glass), and T-Cut (a auto-body pain restorer with a mild abrasive). Either technique will possibly result in a highly polished area, but this is unlikely to be noticeable when switched on - maybe even less so if you put a screen protector on.
I know the phone isn't glass, but I've taken a very noticeable scratch out of a glass TV screen before now - a scratch with pixels behind seems to magnify, and so makes it very noticeable. You could see the repair when the TV was off, but it looked perfect when the TV was on.
Obviously, there's always a risk you could make things worse by trying to take the scratch out.
Cheers,
Steve.
OK, so today I threw my Incredible (AMOLED if it matters at all) into my backpack and some keys in there scratched it a little bit. The scratches are not too deep, and you can't feel them or anything, so I was hoping there might be a way to fix it. I looked around a little bit and saw that toothpaste can help for getting scratches out of things like CD's and such. Has anyone tried this on their phone? I don't think anything bad would happen, but I don't really know...
Also, I know that I should have bought a screen protector, so please don't remind me about that.
'Getting scratches out' sounds like a bit of a oxymoron. You don't have something IN your screen, a scratch is more like a bit of surface screen missing.
I can't see why toothpaste would harm the screen. Just don't get the phone wet, turn it off, clean up afterwards, etc.
Really can't see how it would help either...
I have never heard of using toothpaste to fix scratches, but since the scratches are not to deep I try this product that has done wonders it is called apple sauce and was originally made to fix iPod scratches. Look it up on amazon.
If this helped please press the thanks button
Yes! It works well, rub it in tiny little circles starting in the center of the screen and working your way out. BUT BE CAREFUL. don't push hard ar all, and don't do the same part more than 2 or 3 little "circles" or you may destroy the screen. if you do it right though, it should work fine.
Nilurun said:
Yes! It works well, rub it in tiny little circles starting in the center of the screen and working your way out. BUT BE CAREFUL. don't push hard ar all, and don't do the same part more than 2 or 3 little "circles" or you may destroy the screen. if you do it right though, it should work fine.
Click to expand...
Click to collapse
What do you mean "destroy the screen"? How easily can I accidentally do this? I don't want it to get worse!
They say you can do it on CD's it acts like a polish. I think it all depends on the surface of the screen and what kind of metirial it is made up of.
Good luck though!
Vaseline. lol
Yes, it will probably work since toothpaste is the same as a car polish in general
Sent out of my Free Candy Van.
Mustard works better than toothpaste. It turns into glass when you use it to remove scratches on your phones screen. If you rub it on your face every night before going to bed you'll grow a proper manly beard too. Really, there's no limit to the things you can do with mustard with it's amazing properties.*
*All of the above is patently untrue in the same way that turning lead into gold is pure fiction. Toothpaste contains mild abrasives. Would you use sandpaper on your screen?
DirkGently1 said:
Mustard works better than toothpaste. It turns into glass when you use it to remove scratches on your phones screen. If you rub it on your face every night before going to bed you'll grow a proper manly beard too. Really, there's no limit to the things you can do with mustard with it's amazing properties.*
*All of the above is patently untrue in the same way that turning lead into gold is pure fiction. Toothpaste contains mild abrasives. Would you use sandpaper on your screen?
Click to expand...
Click to collapse
Nice! I tried the mustard, and it looks like it worked! My screen looks brand new! Also, I think I can already see stubble after just one night!!! The only problem is now my pillow is stained yellow...
Anyways, I thought that the toothpaste helped because of the slight abrasiveness of it...?
There are products here in the UK made under the Duraglit brand as Brasso and Silvo. These are metal polishes, but are also available as a cotton wad roll impregnated with the stuff. I do not know if they are sold in the USA, but there may be something similar from US manufacturers. As their name suggests they are made to clean and polish brassware and silverware.
It is a very fine abrasive suspension, but it also contains ammonia to remove any tarnish, and white spirit to act as a lubricant. They are quite good at removing scratches from watch glasses etc., by gently cutting into the surface, down to the level of the scratch.
On touch screen devices, the touch screen sensitive layer lives above the screen glass, but under a plastic protective layer. It will be this top layer that you have scratched. The product above or something similar may work, but check that the white spirit does not attack the protective plastic layer.
As mentioned above small, circular movements, a little at a time may work. If you cut through the protective layer, you are in trouble.
patrick848 said:
Nice! I tried the mustard, and it looks like it worked! My screen looks brand new! Also, I think I can already see stubble after just one night!!! The only problem is now my pillow is stained yellow...
Anyways, I thought that the toothpaste helped because of the slight abrasiveness of it...?
Click to expand...
Click to collapse
Nice to see people getting into the spirit of things Anyway, i hope you find a solution that works. I personally might be tempted to ask the manufacturer to replace the digitizer, as long as the cost wasn't too prohibitive. I tried changing one myself on an old phone and it didn't work out too well
Am not sure about what kind of display cover your phone has. But, if it's capacitive or IR and the top layer is glass, take it to the local wrist-watch merchant/repair center and they could fix it for you using H2SO4 and some filler.
Alternatively, you can have the top layer of the touch panel replaced.
And, next time, do use a screen protector. =D
saintmagician said:
'Getting scratches out' sounds like a bit of a oxymoron. You don't have something IN your screen, a scratch is more like a bit of surface screen missing.
I can't see why toothpaste would harm the screen. Just don't get the phone wet, turn it off, clean up afterwards, etc.
Really can't see how it would help either...
Click to expand...
Click to collapse
I am not sure if toothpaste would help the screen scratches, its not a tooth scratch.. LMAO
Is it true that tooth paste works like sand paper on glass, does that mean that it contain something harder than glass? I don't have scratch just want to remove paint between my screen protector. Want to know if tooth paste actually micro scratch the glass.
Just picked up myself a 32gb version off amazon for 464 total and will be recieving monday(stupid best buy didnt have it in stock(the closest store that had it was in texas!!(im in tucson)))
but my question is, should i get a case and\or screen protector
i picked and felt around the display one in the best buy near my dorm and loved it so i bought one but i will probably be taking it with me too classes and work and stuff so i may need a case and gaurd
what do you think?? what are you reccomendations,
if i was to get a case, i dont really want a tri-fold one, and i would want it to be soft on the inside and (fake) leather on the outside
in terms of screen protectors...it shjould probably be scratch filling because i will have the tablet for a few days with normal use before finally receiving it
but im open to suggestions, any ideas?
thanks,
I have a screen protector made by mr. Shield, its great. And i ordered a moko case, but it hasnt arrived yet.
I can recommend this tempered glass screen protector: http://www.amazon.com/gp/product/B0...ode=as2&tag=fiabte-20&linkId=D2LUGFFLTS3RY4YJ
It feels like the original screen, is really scratch resistant (tested with metal knife and keys with high pressure) and is very clear. The application is easy and bubble free as long as you don't have a big dust corn under the protector, fine scratches in the screen will become invisible.
simmac said:
I can recommend this tempered glass screen protector: http://www.amazon.com/gp/product/B0...ode=as2&tag=fiabte-20&linkId=D2LUGFFLTS3RY4YJ
It feels like the original screen, is really scratch resistant (tested with metal knife and keys with high pressure) and is very clear. The application is easy and bubble free as long as you don't have a big dust corn under the protector, fine scratches in the screen will become invisible.
Click to expand...
Click to collapse
wow sounds helpful, like something i might need.
mind if i ask a few more questions?
1. is it flexible
2. is there a high chance of it breaking during shipping
3. is it difficult to put on
4. is it difficult to take off?(like how other, non-tempered ones peel away)
5. if i were to drop the tablet, would i shatter the screen protector?
6. how much did yours cost?(was\is it on sale?)
7. what are the downsides to using this screen protector?
BTW thanks for including the link, very very helpful
ive never had a tempered glass screen protector as you can tell lol
zawata said:
1. is it flexible
2. is there a high chance of it breaking during shipping
3. is it difficult to put on
4. is it difficult to take off?(like how other, non-tempered ones peel away)
5. if i were to drop the tablet, would i shatter the screen protector?
6. how much did yours cost?(was\is it on sale?)
7. what are the downsides to using this screen protector?
Click to expand...
Click to collapse
1) Yes, you can bend it a few degrees, I didn't want to bend it more.
2) The glass comes in a hard plastic case, so I would say no.
3) You have to ensure that your screen is clean (for best results turn on the shower hot until you have steam, turn it off and wait a few minutes, this will take the dust corns down. Clean the screen and apply the protector in the steamed bathroom), and I recommend to put some sticky film on the sides so you can hold the panel without touching it.
Once the protector is aligned perfectly, apply pressure and you will see that it applies itself. Don't fear bubbles, they will go away within minutes if you apply pressure and gently "massage" it.
4) I once removed a tempered glass protector from a nexus 5 (not mine though), you have to take it off on one corner which can be kind of difficult, but once you can lift it off, it won't leave any residue.
5) Probably, never had to try that.
6) Mine cost about 10€ (~12,50$), amazon showed it as sale, but most probably it always has this price.
7) With SOME styluses you may have an decreased sensibility, but my metal mash stylus works fine.
Also, it might break without falling under certain circumstances. But rarely.
I hope, I could help you!
simmac said:
1) Yes, you can bend it a few degrees, I didn't want to bend it more.
2) The glass comes in a hard plastic case, so I would say no.
3) You have to ensure that your screen is clean (for best results turn on the shower hot until you have steam, turn it off and wait a few minutes, this will take the dust corns down. Clean the screen and apply the protector in the steamed bathroom), and I recommend to put some sticky film on the sides so you can hold the panel without touching it.
Once the protector is aligned perfectly, apply pressure and you will see that it applies itself. Don't fear bubbles, they will go away within minutes if you apply pressure and gently "massage" it.
4) I once removed a tempered glass protector from a nexus 5 (not mine though), you have to take it off on one corner which can be kind of difficult, but once you can lift it off, it won't leave any residue.
5) Probably, never had to try that.
6) Mine cost about 10€ (~12,50$), amazon showed it as sale, but most probably it always has this price.
7) With SOME styluses you may have an decreased sensibility, but my metal mash stylus works fine.
Also, it might break without falling under certain circumstances. But rarely.
I hope, I could help you!
Click to expand...
Click to collapse
Very helpful thank you
I'll imagine the slight bending is meant to address the slight bending of the tablet
The shower technique should be especially helpful, I've never heard that one before(good thing my dorm has extra hot showers)
By sticky film do you mean tape?
Other than a small chance of breaking, i think the benefits outweigh the costs. You've successfully convinced me
Is there like a warranty I can get on it? Because that feels like something I might need
You are welcome, I first read about tempered glass protectors on this forum, since then I won't go without one.
zawata said:
By sticky film do you mean tape?
Is there like a warranty I can get on it? Because that feels like something I might need
Click to expand...
Click to collapse
Oh yes, english is not my mother tongue, so I forgot the vocab.
I think amazon gives you one or two years warranty, but I'm not sure about the situation in the US.
zawata said:
Just picked up myself a 32gb version off amazon for 464 total and will be recieving monday(stupid best buy didnt have it in stock(the closest store that had it was in texas!!(im in tucson)))
but my question is, should i get a case and\or screen protector
i picked and felt around the display one in the best buy near my dorm and loved it so i bought one but i will probably be taking it with me too classes and work and stuff so i may need a case and gaurd
what do you think?? what are you reccomendations,
if i was to get a case, i dont really want a tri-fold one, and i would want it to be soft on the inside and (fake) leather on the outside
in terms of screen protectors...it shjould probably be scratch filling because i will have the tablet for a few days with normal use before finally receiving it
but im open to suggestions, any ideas?
thanks,
Click to expand...
Click to collapse
Get a case or a screen protector. Getting both is kinda redundant.
Get screen protector if you want to keep the look of your tablet. You might also consider getting a skin for the backside to prevent the back from getting scratched.
Get a case if you want both screen protection and some drop protection and you don't mind the slight bulkiness of the case.
mkygod said:
Get a case or a screen protector. Getting both is kinda redundant.
Get screen protector if you want to keep the look of your tablet. You might also consider getting a skin for the backside to prevent the back from getting scratched.
Get a case if you want both screen protection and some drop protection and you don't mind the slight bulkiness of the case.
Click to expand...
Click to collapse
Didn't think about it like that,
The most important thing is that I don't want the screen scratched so that's top priority
The case I can see as less important though thanks
So my idea worked and i now have a full adhesive screen protector. Covers from edge to edge and there is no halo effect. The protector is on good and does not peel/pop out. I am using a unicorn beetle pro full body case and no problems. Before the case would pop out the protector but not anymore.
What exactly was your idea?
How did you manage this? (For the people that haven't been keeping up with your posts, such as myself.)
Did you use LOCA or OCA film?
Sent from my Galaxy Note7 using Tapatalk
so much detail. so much wow. i wish there was more information, like, what you used, how you did it, instead of a brag post. thanks for the pictures though!
One of his older posts discussed using LOCA. If you use LOCA, how do you get it off if you ever want to remove the screen protector?
Yes I used LOCA glue. To take it off you just heat it. It should be easier to remove than when replacing the digitizer.
I got a couple air bubbles though but id rather have that than a scratched up screen lol
Interesting.... but more info on how to do it and what products to use would be great. Thanks OP.
I was just thinking about if this was a solution two days ago, but this is exciting news that its worked. My question is, is the LOCA a problem to handle, because i could see using too much might have some go into the speakers or just seep from the borders. when originally applied. and is there a way to make sure we don't get bubbles?
teegunn said:
Interesting.... but more info on how to do it and what products to use would be great. Thanks OP.
Click to expand...
Click to collapse
Donnyohs said:
I was just thinking about if this was a solution two days ago, but this is exciting news that its worked. My question is, is the LOCA a problem to handle, because i could see using too much might have some go into the speakers or just seep from the borders. when originally applied. and is there a way to make sure we don't get bubbles?
Click to expand...
Click to collapse
Yea i got a little on the speaker but you just have to be care full and as it seeps kut clean it with a rag. The good thing is that it wont dry until you put the black light on it. The part you have to be the most carefull with is the home button. Loca will make it sticky and a little harder to press. I also reccoment you get a protector that is completely clear as the one i got has black on the top and bottom and it prevents the black light from drying the glue under those areas. Clean the screen good. To avoid bubbles look at youtube and see how they apply it. Basically a stick figure but instead of a head it is a y shape. Carefully place the protector and let is slowly spread on its own. Once it stoos spreading then you could slowly press down on it and remove the remaining bubbles. I lined uo thw home and back buttons first and made sure the cut outs were aligned for the camera and sesors. Then i applied the black light on the bottom half furst so that it would align properly. I did this while pressing down on it because the air bubbles kept coming up. I also covered up the top half so that wouldnt dry up. Oncw i got the bottom i got rid of any air bubbles on the top half and did the same. After that i put the phone in a box., close it up, do a cut out for the black light to fit and let it sit for a couple minutes to dry more. Then i cleaned and dried the edges. Make sure not to leave too much of the loca in between the screen and protector so you wont get touch senaitivity issues. And do it where there is no dust. I oly got 1 small air bubble but some like white spots that appear to be dust. And again clean the speaker, home button, sensors, and camera before drying. You could also just scrape it off with a plastic blade that the loca came with. And make sure to use liquid version and not the film.