Database Info

[Q] help me: help my atrix 2 flash failure

I just use RSD 5.6 to flash my atrix 2 to 2.3.5 but flash failure .
it is notice that
"Failed flashing process. Failed flashing process. 1/19 flash mbm "allow-mbmloader-flashing-mbm.bin" -> USB error occured while reading/writing.; phone connected."
and then, when i go to FastBoot mode, it is notice that
"AP Fastboot Flash Mode (S) (Flash Failure)
0A.68
Baterry OK
OK to Program
Connect USB
Data Cable."
help me, thanks all

manbk401 said:
I just use RSD 5.6 to flash my atrix 2 to 2.3.5 but flash failure .
it is notice that
"Failed flashing process. Failed flashing process. 1/19 flash mbm "allow-mbmloader-flashing-mbm.bin" -> USB error occured while reading/writing.; phone connected."
and then, when i go to FastBoot mode, it is notice that
"AP Fastboot Flash Mode (S) (Flash Failure)
0A.68
Baterry OK
OK to Program
Connect USB
Data Cable."
help me, thanks all
Click to expand...
Click to collapse
We need more info to help you. which version of the phone? were you on 2.3.6 or 2.3.5 before the flash? do you have drivers installed correctly?

lkrasner said:
We need more info to help you. which version of the phone? were you on 2.3.6 or 2.3.5 before the flash? do you have drivers installed correctly?
Click to expand...
Click to collapse
the first, i use Retail Indian - 5.5.1-EDEM-28-37-SEARET rom (2.3.6). I want to up to Supercharged v5 (following that ). but when completed, my phone just stops at boot screen (i wait 10 minutes but not change).
after that, i go to FastBoot mode and flash to 2.3.5 via RSD Lite. the failure was happended
i use RSD lite 5.6 and Motorola 5.2 Drivers.
ps: I tryed Flashboot following this topic: 2.3.6 from modified 2.3.5 Flashboot: "Invalid CG Version" FIX but nothing change

manbk401 said:
the first, i use Retail Indian - 5.5.1-EDEM-28-37-SEARET rom (2.3.6). I want to up to Supercharged v5 (following that ). but when completed, my phone just stops at boot screen (i wait 10 minutes but not change).
after that, i go to FastBoot mode and flash to 2.3.5 via RSD Lite. the failure was happended
i use RSD lite 5.6 and Motorola 5.2 Drivers.
ps: I tryed Flashboot following this topic: 2.3.6 from modified 2.3.5 Flashboot: "Invalid CG Version" FIX but nothing change
Click to expand...
Click to collapse
go to the noob thread and follow the instructions for replacing files in the fxz, just use the same replace files but the indian fxz that you can download.

lkrasner said:
go to the noob thread and follow the instructions for replacing files in the fxz, just use the same replace files but the indian fxz that you can download.
Click to expand...
Click to collapse
sorry, i don't understand u. i don't have the indian fzx. i'm vietnamese. when i bought atrix 2 at&t, my phone is still on stock 2.3.6.

manbk401 said:
sorry, i don't understand u. i don't have the indian fzx. i'm vietnamese. when i bought atrix 2 at&t, my phone is still on stock 2.3.6.
Click to expand...
Click to collapse
No problem. Just go here: http://forum.xda-developers.com/showthread.php?t=1396650 and read the section on how to flash the FXZ. make sure to look at the bottom part where it tells you to replace some files. you will need to do that. Instead of using the ATT FXZ file like they say use the one that matches your current version (SEARET I think you said) and follow the same directions, but use that file instead. Get if from here: http://sbf.droid-developers.org/edison/list.php

lkrasner said:
No problem. Just go here: http://forum.xda-developers.com/showthread.php?t=1396650 and read the section on how to flash the FXZ. make sure to look at the bottom part where it tells you to replace some files. you will need to do that. Instead of using the ATT FXZ file like they say use the one that matches your current version (SEARET I think you said) and follow the same directions, but use that file instead. Get if from here: http://sbf.droid-developers.org/edison/list.php
Click to expand...
Click to collapse
ok, thanks u. i will try to do follow your help. in vietnam, it's 1 am, i need to sleep .
have a nice day

manbk401 said:
I just use RSD 5.6 to flash my atrix 2 to 2.3.5 but flash failure .
it is notice that
"Failed flashing process. Failed flashing process. 1/19 flash mbm "allow-mbmloader-flashing-mbm.bin" -> USB error occured while reading/writing.; phone connected."
and then, when i go to FastBoot mode, it is notice that
"AP Fastboot Flash Mode (S) (Flash Failure)
0A.68
Baterry OK
OK to Program
Connect USB
Data Cable."
help me, thanks all
Click to expand...
Click to collapse
This is right sbf or FXZ for SEART ROM
http://sbf.droid-developers.org/edison/5.5.1-EDEM-27-SEARET_cfc.xml.zip
Reinstall Drivers and RSD Lite and try flashing it, it should work

prasannapmv said:
This is right sbf or FXZ for SEART ROM
Reinstall Drivers and RSD Lite and try flashing it, it should work
Click to expand...
Click to collapse
can i should replace some file in above zip? because my phone is 2.3.6
Code:
How to flash the FXZ once applying the OTA update and get back to 2.3.5, ONCE YOU UPDATE TO THE OTS 2.3.6 YOU WILL NOT BE ABLE TO FLASH THE 2.3.5 FXZ WITHOUT FOLLOWING THESE STEPS BELOW!!
NOTE: Download this file HERE -
Unzip it and move all the the items in it to the stock fxz. You might get a warning about replacing files, just click OK. NOTE that Windows might not be able to handle the size of the fxz. I have 6 GB RAM but Windows still wasn't able to perform a drag-and-drop through the fxz's zip. I recommend that you just unzip the fxz and then put the files in. (You don't have to rezip it either, RSD Lite will still recognize it and will flash faster).
You should be able to use RSD Lite to flash the file.

lkrasner said:
No problem. Just go here: http://forum.xda-developers.com/showthread.php?t=1396650 and read the section on how to flash the FXZ. make sure to look at the bottom part where it tells you to replace some files. you will need to do that. Instead of using the ATT FXZ file like they say use the one that matches your current version (SEARET I think you said) and follow the same directions, but use that file instead.
Click to expand...
Click to collapse
i've downloaded the india FXZ and the replace file. but the xml file is not same name.
in replace file is InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID285, and in india FZX is 5.5.1-EDEM-27-SEARET_cfc
and a question, my phone use code unlock AT&T, so if I flash to india FXZ, any problem happen with my atrix 2?

manbk401 said:
i've downloaded the india FXZ and the replace file. but the xml file is not same name.
in replace file is InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID285, and in india FZX is 5.5.1-EDEM-27-SEARET_cfc
and a question, my phone use code unlock AT&T, so if I flash to india FXZ, any problem happen with my atrix 2?
Click to expand...
Click to collapse
Yeah, I was being stupid. Was the phone originally ATT when you bought it, or was it indian. that makes a big difference. you need to know what it said under settings > about phone.
anyways this should fix it, just use which ever fxz is right (from my post in the noob thread:
just thought of an easier way to get you restored. Most of the time you only really need to do system. download the moto-fastboot utility (it's similar to normal fastboot but you MUST use it instead or it will not work) and the fxz for your region. Extract the fxz and put the system.img from it and moto-fastboot in the same folder. open a command prompt in that folder (hold shift and right click) and type
Code:
moto-fastboot.exe flash system system.img
moto-fastboot.exe erase userdata
obviously you need to have your phone in fastboot mode to do that. it does the exact same thing as rsd, just only the 2 important steps, flashing system and wiping data.)
Let me know how that works for you. It may not since you have had flash failures, but we'll see.
moto-fastboot: http://forum.xda-developers.com/attachment.php?attachmentid=635584&d=1308928440 you should actually extract it and put all the things in it in the folder with system.img
Good luck!

lkrasner said:
Yeah, I was being stupid. Was the phone originally ATT when you bought it, or was it indian. that makes a big difference. you need to know what it said under settings > about phone.
anyways this should fix it, just use which ever fxz is right (from my post in the noob thread:
just thought of an easier way to get you restored. Most of the time you only really need to do system. download the moto-fastboot utility (it's similar to normal fastboot but you MUST use it instead or it will not work) and the fxz for your region. Extract the fxz and put the system.img from it and moto-fastboot in the same folder. open a command prompt in that folder (hold shift and right click) and type
Code:
moto-fastboot.exe flash system system.img
moto-fastboot.exe erase userdata
obviously you need to have your phone in fastboot mode to do that. it does the exact same thing as rsd, just only the 2 important steps, flashing system and wiping data.)
Let me know how that works for you. It may not since you have had flash failures, but we'll see.
moto-fastboot: http://forum.xda-developers.com/attachment.php?attachmentid=635584&d=1308928440 you should actually extract it and put all the things in it in the folder with system.img
Good luck!
Click to expand...
Click to collapse
hi, i'm a lucky man. i flashed my phone following Return to Stock 2.3.5 Fastboot SCRIPT. and now, my phone is ok
thanks 4 your help

manbk401 said:
hi, i'm a lucky man. i flashed my phone following Return to Stock 2.3.5 Fastboot SCRIPT. and now, my phone is ok
thanks 4 your help
Click to expand...
Click to collapse
yep, that works pretty well too. It does exactly what I said to do, but more. I do this because it goes faster

want to get back to 2.3.6
plz help me ma phone was on 2.3.6 then i tried to flash indian rom but it says flash error
n i tried several rom bt it didnt work ... all are the same
how can i get back to 2.3.7 ..thank you

i have this 5.5.1 EDEM 27 searet file which is 517 mb
should i flash this or download another 5.5.1 EDEM 28 27 searet WHICH IS 519 mb and will that hard brick my phone if i flash wrong file? im from india and recently purchased this phone and im on 2.3.6

hemanbond said:
i have this 5.5.1 EDEM 27 searet file which is 517 mb
should i flash this or download another 5.5.1 EDEM 28 27 searet WHICH IS 519 mb and will that hard brick my phone if i flash wrong file? im from india and recently purchased this phone and im on 2.3.6
Click to expand...
Click to collapse
Look in settings>about phone..then download accordingly..55.28.37 is the latest in gb 2.3.6..
Sent from my MB865 using xda app-developers app

ye i have 55.28.37 ...so which file should i download?
---------- Post added at 01:30 PM ---------- Previous post was at 01:27 PM ----------
5.5.1-EDEM-28-37-SEARET_cfc.xml.zip
is this the one which ill have to download? and is this 2.3.5 or 2.3.6 and do i need to replace the files in order to flash ...just asking cause im curious...i dont wanna hard brick

hemanbond said:
ye i have 55.28.37 ...so which file should i download?
---------- Post added at 01:30 PM ---------- Previous post was at 01:27 PM ----------
5.5.1-EDEM-28-37-SEARET_cfc.xml.zip
is this the one which ill have to download? and is this 2.3.5 or 2.3.6 and do i need to replace the files in order to flash ...just asking cause im curious...i dont wanna hard brick
Click to expand...
Click to collapse
Yup this is the zip u need..its 2.3.6..no replacing..just flash
Sent from my MB865 using xda app-developers app

Flashed my atrix 2 and fastboot fail
I bought my atrix 2 from US and unlocked it and am using this in india now. I tried to flashboot the phone with "5.5.1-EDEM-28-37-SEARET_cfc.xml". I added the new files thats available in the noob called replace.zip. I also tried the moto fast boot. Now am not able to flashboot and when i run flashboot i get this error "failed flashing process. 11/21 flash ebr "ebr"-> Phone returned fail; Phone connected" .
Please help me.

I just got my ATT Atrix 2 and I think I've already bricked it, soft at least. I used a script to go from 2.3.6 back to 2.3.5 stock, then OTA to 2.3.6, then I flashed the ICS leak and flashed SCV7, it was running horribly, kept crashing and was being extremely unstable so then I tried to use the FXZ script to go from ICS back to GB, and all my phone was doing was showing the Motorola dual core screen and boot looping or just staying on that screen I couldn't tell. I can get into fastboot, when I try to get into recovery there is an icon of a box with an arrow coming out of it and a little android and a yellow progress bar and when that finishes it goes to fastboot and it says "AP FastBoot Flash Mode (S) (Flash Failure) what can I do?
---------- Post added at 07:12 PM ---------- Previous post was at 06:55 PM ----------
The battery is low going by my luck I'm going to assume the phone will not charge while in fast boot. I've been at this for way too many hours, if someone could tell me how to get this phone working I'd appreciate it.

anyone know where to find stock rom?

I have put a couple of roms on my phone and forgot to make a copy of the out of box rom the atrix 2 comes with. Does anyone know where i could find that do i can download the ics release for 2.3.6? i am currently on lithium rom.

FXZ
http://forum.xda-developers.com/showthread.php?t=1396650
Sent from my MB865 using Tapatalk 2

leifemagnuson said:
FXZ
http://forum.xda-developers.com/showthread.php?t=1396650
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
haha sorry kinda a big noob what is FXZ?

Read the thread i posted. It will tell you. Basically its stock.
Sent from my MB865 using Tapatalk 2

Sorry if this is a stupid question but, is fastboot and FXZ the same thing? I'm still a little confused..

dumgum89 said:
Sorry if this is a stupid question but, is fastboot and FXZ the same thing? I'm still a little confused..
Click to expand...
Click to collapse
The FXZ is actually several files that are basically disk images of the different partitions on the phone.
Fastboot is state and a protocol that the phone is in that allows you to flash it. the moto-fatboot untility "could" be used to flash the partitions instead of RSDlite, if you want to, and that is basically how I developed my return to gb script that we have to get back from ICS.

jimbridgman said:
The FXZ is actually several files that are basically disk images of the different partitions on the phone.
Fastboot is state and a protocol that the phone is in that allows you to flash it. the moto-fatboot untility "could" be used to flash the partitions instead of RSDlite, if you want to, and that is basically how I developed my return to gb script that we have to get back from ICS.
Click to expand...
Click to collapse
So I'm trying to FXZ back to 2.3.5 like it says to in your guide to install ICS, can I use bpear96's FASTBOOT script to complete that first step? Because I'm a little confused on how to use RSDlite

dumgum89 said:
So I'm trying to FXZ back to 2.3.5 like it says to in your guide to install ICS, can I use bpear96's FASTBOOT script to complete that first step? Because I'm a little confused on how to use RSDlite
Click to expand...
Click to collapse
I don't think so, because bpear's script does not flash all the partitions that RSDlite does.
You really need to use RSDlite.
It is very simple just open rsdlite, and click on the ... button and select the xml file from the fxz and tell it to start. Just make sure your phone is in fastboot mode first.

jimbridgman said:
I don't think so, because bpear's script does not flash all the partitions that RSDlite does.
You really need to use RSDlite.
It is very simple just open rsdlite, and click on the ... button and select the xml file from the fxz and tell it to start. Just make sure your phone is in fastboot mode first.
Click to expand...
Click to collapse
Alright I will try, fingers crossed I don't brick my phone :fingers-crossed:
---------- Post added at 03:52 PM ---------- Previous post was at 03:41 PM ----------
dumgum89 said:
Alright I will try, fingers crossed I don't brick my phone :fingers-crossed:
Click to expand...
Click to collapse
I'm almost done but its taking a while flashing the webtop grfs.img should it take that long? It's the last step..

dumgum89 said:
Alright I will try, fingers crossed I don't brick my phone :fingers-crossed:
---------- Post added at 03:52 PM ---------- Previous post was at 03:41 PM ----------
I'm almost done but its taking a while flashing the webtop grfs.img should it take that long? It's the last step..
Click to expand...
Click to collapse
Yes that is a 1GB file system, and it is slow to flash.

leifemagnuson said:
Read the thread i posted. It will tell you. Basically its stock.
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
would it get rid of root and what not?

willyyumm27 said:
would it get rid of root and what not?
Click to expand...
Click to collapse
The FXZ will put you back to out-of-the-box stock. Root and everything else, gone.
Sent from my phone's mind

alteredlikeness said:
The FXZ will put you back to out-of-the-box stock. Root and everything else, gone.
Sent from my phone's mind
Click to expand...
Click to collapse
when i try to flash it starts going then will stop and on my phone it will say flash failed. i want to get back to the stock rom

willyyumm27 said:
when i try to flash it starts going then will stop and on my phone it will say flash failed. i want to get back to the stock rom
Click to expand...
Click to collapse
Did you go here: http://forum.xda-developers.com/showthread.php?t=1396650 ? And read the section under these bold red letters?:
"How to flash the FXZ once applying the OTA update and get back to 2.3.5, ONCE YOU UPDATE TO THE OTS 2.3.6 YOU WILL NOT BE ABLE TO FLASH THE 2.3.5 FXZ WITHOUT FOLLOWING THESE STEPS BELOW!!"
Are you AT&T MB865? We need more information as to where you are and what you've tried so far to be able to help you...

alteredlikeness said:
Did you go here: http://forum.xda-developers.com/showthread.php?t=1396650 ? And read the section under these bold red letters?:
"How to flash the FXZ once applying the OTA update and get back to 2.3.5, ONCE YOU UPDATE TO THE OTS 2.3.6 YOU WILL NOT BE ABLE TO FLASH THE 2.3.5 FXZ WITHOUT FOLLOWING THESE STEPS BELOW!!"
Are you AT&T MB865? We need more information as to where you are and what you've tried so far to be able to help you...
Click to expand...
Click to collapse
thank you! and i also have another question how would i install this http://forum.xda-developers.com/showthread.php?t=1648421 now that i am on the ics leak

It seems like neither of the links provided in the thread you posted are valid. I need to get ahold of the fxz as well, anyone else have it?

Silas0220 said:
It seems like neither of the links provided in the thread you posted are valid. I need to get ahold of the fxz as well, anyone else have it?
Click to expand...
Click to collapse
http://sbf.droid-developers.org/edison/list.php
you still need to get the patch files for the fxz from the noob thread, here:
http://forum.xda-developers.com/showthread.php?t=1396650
look for this:
How to flash the FXZ once applying the OTA update and get back to 2.3.5, ONCE YOU UPDATE TO THE OTS 2.3.6 YOU WILL NOT BE ABLE TO FLASH THE 2.3.5 FXZ WITHOUT FOLLOWING THESE STEPS BELOW!!
NOTE: Download this file HERE -
Unzip it and move all the the items in it to the stock fxz. You might get a warning about replacing files, just click OK. NOTE that Windows might not be able to handle the size of the fxz. I have 6 GB RAM but Windows still wasn't able to perform a drag-and-drop through the fxz's zip. I recommend that you just unzip the fxz and then put the files in. (You don't have to rezip it either, RSD Lite will still recognize it and will flash faster).
You should be able to use RSD Lite to flash the file.

Ok, super noob question. But which of those files in that first link do I want? I was stock US AT&T 2.3.6 (my phone shipped with 2.3.6, but I understand I'll still need the patch files) .
EDIT: I missed that one column. Think I'm good

[Q] Possible to manually apply official 4.0.4?

Hi everyone,
I've tried looking around for answer to this, but could not find anything, or at least could not find anything that said it explicitly.
So the OTA update is now live in the USA, but here in New Zealand no OTA update is available.
Im on stock 2.3.6, and unrooted, and when searching for updates nothing is found.
Is there any way to manually apply the US 4.0.4 official update? Such as flashing an official fxz file?
Would be really appreciated if someone could help me out in lamens terms!
Thanks!

If you have an at&t phone follow the instructions here to get on the leak http://forum.xda-developers.com/showthread.php?t=1779968
After that you can OTA to the official, but we can't FXZ back from the official yet, so staying on the leak is still recommended.
Sent from my MB865 using xda premium

Scottyfer said:
If you have an at&t phone follow the instructions here to get on the leak http://forum.xda-developers.com/showthread.php?t=1779968
After that you can OTA to the official, but we can't FXZ back from the official yet, so staying on the leak is still recommended.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Hi, thanks for the answer.
It does not have stock AT&T, so is it still okay to follow the linked process?
Currently:
System version = 55.1.28.MB865.TNZ.en.NZ
Android version = 2.3.6
Kernal version = [email protected]#1
Baseband version = 2012-02-03 07:56 Off.Bld LUD_EDISON_R1E_PATCH_24_120203_0746 ... (just in case this would create an issue doing OTA update?)

idobbim said:
Hi, thanks for the answer.
It does not have stock AT&T, so is it still okay to follow the linked process?
Currently:
System version = 55.1.28.MB865.TNZ.en.NZ
Android version = 2.3.6
Kernal version = [email protected]#1
Baseband version = 2012-02-03 07:56 Off.Bld LUD_EDISON_R1E_PATCH_24_120203_0746 ... (just in case this would create an issue doing OTA update?)
Click to expand...
Click to collapse
Then it would not work. The update checks for at&t bloatware. As of now I have not seen any update files for the New Zealand version.
Sent from my MB865 using xda premium

ins't there any way to update, like other phones using cwm and instaling a custom rom?

DIDNT HAVE ENOUGH time to finish post, will finish soon, got school right now so dont start till i have finished it!!!
EDIT: finished
Heya fellow NZ'er, I got my motorola atrix 2 on ICS , and im here to help!
So follow these steps to get it working, First off, get moto-fastboot, extract it, and get the all the files inside into C:/Users/*Your name*/HERE.
Once that is done, get this file WARNING: its around 350MBs. Extract that file into C:/Users/*Your name*/HERE So that you have a whole bunch of .img files and a few otheres in there.
Ok now the tricky part, flashing the files.
MAKE SURE YOUR BATTERY IS FULL!!!!
Put the Atrix 2 in fastboot mode by turning it on while holding power, vol up and vol down all at the same time. (I prefer holding vol up and down together first, and pressing the power button.) then press vol down to get to a selection called "AP fastboot" and then press volume up.
Once there, make sure it has installed the right drivers (Should be like Mot single somethingarather device) and then go to start and type cmd in the search bar. go to the program and then once in command prompt, type in:
Code:
moto-fastboot devices
Then your phone should show up. Next just copy this and right click and paste into Command Prompt
Code:
moto-fastboot flash mbm allow-mbmloader-flashing-mbm.bin
moto-fastboot reboot-bootloader
Wait for it to come back again from reboot
Code:
moto-fastboot flash mbmloader mbmloader.bin
moto-fastboot flash mbm mbm.bin
moto-fastboot flash cdt.bin cdt.bin
moto-fastboot flash lbl lbl
moto-fastboot flash logo.bin logo.bin
moto-fastboot flash ebr ebr
moto-fastboot flash mbr mbr
moto-fastboot flash devtree device_tree.bin
moto-fastboot flash recovery recovery.img
moto-fastboot erase userdata
moto-fastboot erase cache
moto-fastboot flash system system.img
moto-fastboot flash webtop grfs.img
moto-fastboot flash preinstall preinstall.img
moto-fastboot flash radio radio.img
moto-fastboot flash boot boot.img
moto-fastboot reboot
Now hold the phone.(Literally) Now it may seem bricked. Well thats what happened to me.
Anyway take the battery out, and wait a Full 5-10 mins (And i mean actually get a stopwatch if you have to), then put it back in then leave it to charge for about 5-10 mins (Even though it was full when you started RIGHT??).
Now it should boot up normally and on its way to ICSdom!

Hey, cheers for the reply!
Is that the firmware from the "Atrix 2 MB865 Firmwares SuperThread (Ice Cream Sandwich)" thread?
Just wondering if I will be able to get back to current/an NZ version after flashing that? My atrix 2 still has over 2 and a half years of warranty remaining so, kind of want to keep it under warranty if possible. I'm sure if its sent in with firmware that doesnt match the IMEI, it will be coming straight back :S

idobbim said:
Hey, cheers for the reply!
Is that the firmware from the "Atrix 2 MB865 Firmwares SuperThread (Ice Cream Sandwich)" thread?
Just wondering if I will be able to get back to current/an NZ version after flashing that? My atrix 2 still has over 2 and a half years of warranty remaining so, kind of want to keep it under warranty if possible. I'm sure if its sent in with firmware that doesnt match the IMEI, it will be coming straight back :S
Click to expand...
Click to collapse
Well I was playing around with my phone, and was able to flash it with Telecom NZ firmware So im pretty sure if you need to get it fixed, you can just download the telecom NZ file thats in the same place, and follow my steps again, to get back to Telecoms firmware, Now time to get back to finishing my steps lol...

Thanks heaps for completing the steps, just got to work up the courage to do it now :S
The part where you said it seems bricked seems a little scary lol.
The drivers you linked are 32bit, did you run them on 64bit windows fine, or should I search for a 64bit version

Drivers Theyre the ones I used and Im on 64 bit

ICS 4.0.4 root
Hey there,
I'm trying to root my atrix 2 which is upgraded to the recent update ICS 4.0.4. I'm curious to know like, how much time it takes to root the device?

karthikreddy0430 said:
Hey there,
I'm trying to root my atrix 2 which is upgraded to the recent update ICS 4.0.4. I'm curious to know like, how much time it takes to root the device?
Click to expand...
Click to collapse
Ummm, the flashing process I have posted takes about 15-30 mins I would say... But thats with me scouring on how to do it, and not having a nicely formatted instructions to follow

Hey guys,
4.04 update is available for Telecom XT NZ network, for the ATrix2 MB865, System version 672.1.20.MB865.TNZ.en.NZ
I just got a one from Telecom with ICS !

tjfnz said:
Hey guys,
4.04 update is available for Telecom XT NZ network, for the ATrix2 MB865, System version 672.1.20.MB865.TNZ.en.NZ
I just got a one from Telecom with ICS !
Click to expand...
Click to collapse
Yep, i read that telecom are releasing updates sometime in december, so i guess they finally did it. Doesnt affect me though, im on jellybean

tjfnz said:
Hey guys,
4.04 update is available for Telecom XT NZ network, for the ATrix2 MB865, System version 672.1.20.MB865.TNZ.en.NZ
I just got a one from Telecom with ICS !
Click to expand...
Click to collapse
How did you get the update?my mate just got an Atrix 2 but no update is available

lokhor said:
How did you get the update?my mate just got an Atrix 2 but no update is available
Click to expand...
Click to collapse
Look on the side of this page: https://forums.motorola.com/pages/00add97d6c it tells that the MB865 will get it 4.0.4 sometime in december.

[Q] Starts to Fastboot - Flashing Fails

Before I tell you my problem I'm going to outline the process I went through to get too it.
1) I upgraded my 2.3.6 Atrix 2 to ICS 4.0.4 on the Telecom NZ OTA update.
2) I attempted to flash my device to the Asian Atrix 2 Jelly Bean leak
3) Flash failed in process 1/14
My phone now boots to fast boot, however I can still start my phone by entering the recovery menu and selecting boot up normally (or whatever it is, I forgot the exact words)
Telecom NZ users seem to all have this problem when trying to to do this. How can I fix it so it doesn't start to fastboot?
Also what happens if my battery dies in fast boot mode?
Thanks William

williamguy said:
Before I tell you my problem I'm going to outline the process I went through to get too it.
1) I upgraded my 2.3.6 Atrix 2 to ICS 4.0.4 on the Telecom NZ OTA update.
2) I attempted to flash my device to the Asian Atrix 2 Jelly Bean leak
3) Flash failed in process 1/14
My phone now boots to fast boot, however I can still start my phone by entering the recovery menu and selecting boot up normally (or whatever it is, I forgot the exact words)
Telecom NZ users seem to all have this problem when trying to to do this. How can I fix it so it doesn't start to fastboot?
Also what happens if my battery dies in fast boot mode?
Thanks William
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2165891 ... try this one... if ur battery dies u cant flas even using this.. try recharging your battery using external charger. It works.. worked for me.!!

As above ^ How I fixed this problem:
Download 6.7.2_EDEM-18-MEARET from this thread:
http://forum.xda-developers.com/showthread.php?t=1934874
Flash it with the script from this post:
http://forum.xda-developers.com/showpost.php?p=36834775&postcount=108
RSDLite wont work. Will always fail. Just use the script.

gilda311 said:
As above ^ How I fixed this problem:
Download 6.7.2_EDEM-18-MEARET from this thread:
http://forum.xda-developers.com/showthread.php?t=1934874
Flash it with the script from this post:
http://forum.xda-developers.com/showpost.php?p=36834775&postcount=108
RSDLite wont work. Will always fail. Just use the script.
Click to expand...
Click to collapse
can we now flash jb leak using RSD lite after installing that ics version usnig http://forum.xda-developers.com/showpost.php?p=36834775&postcount=108[/url] thread?? if not is there any method to istall those leaks? p

msbaditya said:
can we now flash jb leak using RSD lite after installing that ics version usnig http://forum.xda-developers.com/showpost.php?p=36834775&postcount=108[/url] thread?? if not is there any method to istall those leaks? p
Click to expand...
Click to collapse
Those are not fxz,s they just install like a rom.

[Q] Odin restore with jellybean files?

Hey all, now with the recent 4.3 update that locked the bootloader, i'm afraid of accidentally updating if i ever have to odin. So i have (ics build) VRALF2 MD5, and a VRALEC.bootchain MD5 files. If i use them to odin back to stock, i would be on an ics build, and i would have to update to at least 4.1 to use the casual root method, but if i do update, i will jump to 4.3 and then get a locked bootloader. Where can i find the jellybean versions to odin with, that can get me out of a soft brick? Thanks

joedajoester said:
Hey all, now with the recent 4.3 update that locked the bootloader, i'm afraid of accidentally updating if i ever have to odin. So i have VRALF2 MD5, and a VRALEC.bootchain MD5 files. If i use them to odin back to stock, i would be on an ics build, and i would have to update to at least 4.1 to use the casual root method, but if i do update, i will jump to 4.3 and then get a locked bootloader. Where can i find the jellybean versions to odin with, that can get me out of a soft brick? Thanks
Click to expand...
Click to collapse
Are you already took the OTA update? meaning you're running 4.3 right now? if you do, you can't flash anything else except for stock 4.3 rom and with the option to root your 4.3 (you can not flash back to the older version or any custom rom/kernel) .On 4.3 the bootloader is locked and nothing you can do for now. There's safestrap method to get around the locked bootloader but I don't recommend it for now.

I never took the update, i rooted 4.1.2 and put cm10 on it, and cm11 now. Im just afraid if i ever have to odin i will have to dig deep to find a root method for the old ics build and im not sure if the latest cwm will even work with it. Either way, it just seems like a lot of work, when i could just odin back to jellybean, root, and rom. Thanks for the speedy reply
buhohitr said:
Are you already took the OTA update? meaning you're running 4.3 right now? if you do, you can't flash anything else except for stock 4.3 rom and with the option to root your 4.3 (you can not flash back to the older version or any custom rom/kernel) .On 4.3 the bootloader is locked and nothing you can do for now. There's safestrap method to get around the locked bootloader but I don't recommend it for now.
Click to expand...
Click to collapse

joedajoester said:
I never took the update, i rooted 4.1.2 and put cm10 on it, and cm11 now. Im just afraid if i ever have to odin i will have to dig deep to find a root method for the old ics build and im not sure if the latest cwm will even work with it. Either way, it just seems like a lot of work, when i could just odin back to jellybean, root, and rom. Thanks for the speedy reply
Click to expand...
Click to collapse
You can just flash a pre-rooted stock 4.1.2 here http://forum.xda-developers.com/showthread.php?t=2178482

The link seems to be dead. I also have a bootchain file, which sounds like its needed for coming out of a soft brick according to this link It didnt seem like that download would of included that. However, im not sure if it is required.
buhohitr said:
You can just flash a pre-rooted stock 4.1.2 here http://forum.xda-developers.com/showthread.php?t=2178482
Click to expand...
Click to collapse

joedajoester said:
The link seems to be dead. I also have a bootchain file, which sounds like its needed for coming out of a soft brick according to this link It didnt seem like that download would of included that. However, im not sure if it is required.
Click to expand...
Click to collapse
wait you're not clear, are you bricked right now??
Link is still good, you can directly download from here http://d-h.st/C2e

I'm sorry for the confusion, i'm not bricked right now, but if i ever am in the future, or something else, i want to be able to odin to a rootable version of touchwiz. Not too long ago, twrp recovery was crashing on me, and i was close to odin flashing back to stock, but instead odin flashed cwm recovery. I'm saying that i need a failsafe, if things go wrong
buhohitr said:
wait you're not clear, are you bricked right now??
Click to expand...
Click to collapse

joedajoester said:
I'm sorry for the confusion, i'm not bricked right now, but if i ever am in the future, or something else, i want to be able to odin to a rootable version of touchwiz. Not too long ago, twrp recovery was crashing on me, and i was close to odin flashing back to stock, but instead odin flashed cwm recovery. I'm saying that i need a failsafe, if things go wrong
Click to expand...
Click to collapse
OK, got it here is stock full firmware 4.1.2 http://www.androidfilehost.com/?fid=23134718111254196 just unzip then use Odin to flash back to stock. After that you have to root and unlock bootloader...

Thanks for the link. The zip contains a file called "KIES_HOME_I535VRBMF1_1152558_REV09_user_low_ship.tar.md5" This can be flashed with odin through the pda slot? Sorry for bombarding you with questions, but i want to be confident i have a working solution if i ever need it. The link for unbricking shows to flash the root.66.TAR though the PDA slot, so i just want to make sure. It also says that the bootchains arent required. Also, is it fine that its a .md5 file? Thanks a ton, you have been so helpful.
buhohitr said:
OK, got it here is stock full firmware 4.1.2 http://www.androidfilehost.com/?fid=23134718111254196 just unzip then use Odin to flash back to stock. After that you have to root and unlock bootloader...
Click to expand...
Click to collapse

joedajoester said:
Thanks for the link. The zip contains a file called "KIES_HOME_I535VRBMF1_1152558_REV09_user_low_ship.tar.md5" This can be flashed with odin through the pda slot? Sorry for bombarding you with questions, but i want to be confident i have a working solution if i ever need it. The link for unbricking shows to flash the root.66.TAR though the PDA slot, so i just want to make sure. It also says that the bootchains arent required. Also, is it fine that its a .md5 file? Thanks a ton, you have been so helpful.
Click to expand...
Click to collapse
Yes, just open Odin and pick PDA and browse to this file "KIES_HOME_I535VRBMF1_1152558_REV09_user_low_ship.tar.md5" the flash. This is 4.1.2 full factory firmware come with (bootloader,recovery,kernel,rom,radio..everything). Root66 is ICS 4.0 rom modded factory file and not include radio or recovery. In theory to recover you should use a full factory file.(KIES_HOME_I535VRBMF1_1152558_REV09_user_low_ship.tar.md5)

Thanks so much for all your help! Hopefully i wont need to do a odin restore, but if i do, now i'm prepared. Also, this thread could help someone in the future, which is nice. Again, thanks for all your help
buhohitr said:
Yes, just open Odin and pick PDA and browse to this file "KIES_HOME_I535VRBMF1_1152558_REV09_user_low_ship.tar.md5" the flash. This is 4.1.2 full factory firmware come with (bootloader,recovery,kernel,rom,radio..everything). Root66 is ICS 4.0 rom modded factory file and not include radio or recovery. In theory to recover you should use a full factory file.(KIES_HOME_I535VRBMF1_1152558_REV09_user_low_ship.tar.md5)
Click to expand...
Click to collapse