Database Info

[Q] how do i instal original rom on nexus one?

hi, i am new to this community and i see a lots of very interesting topics and advanced users.i wish i could do that. i am not very advanced but i can click battons on my laptop.-))))
any way. i have nexus one rooted with (MoDaCo Custom ROM for Nexus One - Froyo FRF91) i wanted to go back to original room, then root it and just play with it.
i am one of this peoples ho likes get himself in kind of truble. -)))
any way make a long story short i tried to instal almost every rom i came across including from HTC developer center for nexus one, but it didn't work, it just wont install. also tried FRG83D (Geo 411m). just dont make any sense to me, why i could install OTA rom and it installed custom without any problems.
pls hepl..
reason why i wana go back to OTA rom be coz i get fed up with update notification wich i cant install, and cant delete from my phone application (Wave secure)wich came with rom and starts with phone after reboot. another reason why i wana change my rom be coz my phone gets frezen and some time dont responds on security pattern.
plz if any one can give me direct link to place i can download original rom or bes if original rom already rooted. i am not beeng lazy i spend today already min6 hours on internet and just cant get it.

FULL INFO about my nexus one
(BASEBAND VERSION 32.36.00.28U_4.06.00.12_7)
(KERNEL VERSION 2.6.32.9-27227-G3C98B0D [email protected] *1)
(BUILD NUMBER- MoDaCo Custom ROM r21 For the Google Nexus One (FRF91)

HELP needed!!!!!!!

Hi there this is my first post so i guess this classes me as a noobe lol well i been on the sideline for quite some time with roms and rooting and updating and doing some stuff here and there etc i quite like my lg 3d but the standard rom well froyo is pretty.crap lol but is survice lmao well here goes i updated my phone bqck in nov dec time with the officail kdz lg support tool. it took me forever to update keep going into recovery mode etc and finnally a update request through orange was on website tried that same nothing keep freezing and returning back to afctory mode so keept trying and eventually i had gingerbread 5months later after going through so many roms found 1 but fone kept going wrong so had to go back to backup/recovery and still had proemsbl. so i had to go back to.out the.box. factory for it to work again BRICK lol yay but now i cant get gingerbread or use any rom without having no signal issue i have tried everything now all ways of kdz qll it does is load up new lg support tool and go through with froyo or doing it any other way on here just doesnt work and im lost any help would be appreciated cheers

So just to clarify my phone is working fine still rooted on froyo with cmw aswell cheers here some pics of screenshots

Well here before running gingerbread then after back to froyo

And 1 thing im not clear about is this baseband stuff in both pics there the same wtf i have no idea lol

Modify button - use it, it's your friend
Hey buddy
Too many posts and from none of them it ain't clear what you want. Next time use the Modify (Edit) button and add things that you forgot to say.

matt2098 said:
And 1 thing im not clear about is this baseband stuff in both pics there the same wtf i have no idea lol
Click to expand...
Click to collapse
i think the baseband verion stays the same regardless its rom base. So L6260_MODEM_01.1042.00 will always show. To make sure its changed flash KDZ 21A, 21B, 21D Base Bands Roms Comaptible
All except Go to first new post
[ROM's][KERNEL's][GPL][REF's] The Promethius Project V1.4 [V1.5 Kernel 3rd Beta Test] IF you flashed either 21A,21B,21D and use Kernel 1.3+ You will have the no signal issue you mentioned .
To conclude if you planning on using Go to first new post
The Promethius Project V1.4 + 1.3+ or any other 21e based rom KErnel flash 21e.kdz you shall have no signal issues. IF rom not 21e base use any ginger basedband except 21e base

[Q] LG P500 help!

I am not a pro at installing android os. I am 16. I recently installed Cyanogenmod 10 (Android 4.1) on my phone (LG Optimus One) and I can't call. I use Simple Mobile. Whenever I try to call, it says,"Mobile Network not available". If you don't know a way to fix this. Can you show me how to put it back into Froyo 2.2?

Seems you are on old baseband and you have flashed a rom which is based on new baseband. Just search for ' old bb fix ' and flash this from your recovery. You will get back your network.
Sent from my LG-P500

pmvyas said:
Seems you are on old baseband and you have flashed a rom which is based on new baseband. Just search for ' old bb fix ' and flash this from your recovery. You will get back your network.
Sent from my LG-P500
Click to expand...
Click to collapse
How do I do that tho? Please help me. And I don't have google play on this. But the video says that I can get it from here: h t t p: // w w w. g00(dot)im/ gapps . But idk how. This is really confusing.:confused

search XDA for oldbb fix, it is a flashable zip
here in adfad's post you'll find it http://forum.xda-developers.com/showthread.php?t=1444328

Download the old bb fix from here -
http://forum.xda-developers.com/showthread.php?p=39893089
Boot to your recovery and flash the zip file to fix your network issue. :thumbup:
Sent from my LG-P500

help again plzz
How do I boot to recovery without the clockwork thingy ?

How did you flash the cm 10 rom? Use the same recovery.
Sent from my LG-P500

pmvyas said:
How did you flash the cm 10 rom? Use the same recovery.
Sent from my LG-P500
Click to expand...
Click to collapse
Nvm, I got it. I have the same problem for the Galaxy S2 model t989 too. It dropped in the water, then it can't read the sim card. So can you give me a link to old bb fix for S2 T989 plz? Thank you.

Ok, apparently, I installed a different old bb fix and now that doesn't work , then I installed the one you gave to me but then it didn't work. So I am stuck again. Please help.

goto settings, abouth phone and read what is your baseband, if it's v10 that is old, if its v20 it is new,
if it is old update via LGMDP to latest version 2.3 GB(if PC doesn't recognize your phone, boot into recovery, conect usb cable an from advance/mounts mount usb), install, reboot, now you'll have fresh oficial GB, root with Superoneclick latest version(maybe you will need to do it few times, for me it didn't go first time, if I remember it was at 3rd time or so), install CWM trough RomManager and after that you are good to go with what ever you want to put in that phone, anyway, all ccustom roms from 2.3.7 are for newbb

Updating my p509 from 2012/2013

I purchased an Optimus T (P509) in 2012 and had it unlocked to use on a trip I went to europe. I played around with it a lot and messed with custom roms and basebands, and then left it alone for about a year. I'm now downsizing my phone/tech collection in general and looking to update this to use as a daily driver.
Here's the info about my phone:
ClockworkMod recover v5.0.2.0
Baseband: LGP509AT-00-V10l-OPEN-COM-OCT-23-2010
CyanogenMod version: 10-20130108-UNOFFICIAL-p509
Build number: cm_p509-userdebug 4.1.2 JZO54k eng.arjen.20130108.030427 test-keys
My questions are:
What updates to baseband (if any) do I need to do? Would this mess up my unlock?
Do I need to flash a new recovery?
What ROM would be best for my needs as a daily driver? requirements are stable without crashes and everything works, followed by the newest android version.
Really the rom part I can experiment with later, I'm just not sure if I've hosed myself with the baseband 'fixes' that I recall messing with 2 years ago. I have a new sim card on the way that I will use with this.

shivanani said:
I purchased an Optimus T (P509) in 2012 and had it unlocked to use on a trip I went to europe. I played around with it a lot and messed with custom roms and basebands, and then left it alone for about a year. I'm now downsizing my phone/tech collection in general and looking to update this to use as a daily driver.
Here's the info about my phone:
ClockworkMod recover v5.0.2.0
Baseband: LGP509AT-00-V10l-OPEN-COM-OCT-23-2010
CyanogenMod version: 10-20130108-UNOFFICIAL-p509
Build number: cm_p509-userdebug 4.1.2 JZO54k eng.arjen.20130108.030427 test-keys
My questions are:
What updates to baseband (if any) do I need to do? Would this mess up my unlock?
Do I need to flash a new recovery?
What ROM would be best for my needs as a daily driver? requirements are stable without crashes and everything works, followed by the newest android version.
Really the rom part I can experiment with later, I'm just not sure if I've hosed myself with the baseband 'fixes' that I recall messing with 2 years ago. I have a new sim card on the way that I will use with this.
Click to expand...
Click to collapse
1 - Actually upgrading baseband on that device would lock you out of some frequencies the radio ( not the FM radio ) uses to communicate with the carriers towers. I also have a Optimus T ( P509 ), tho no longer in service.
2 - Depends if you want KitKat ( 4.4 ). If you do then you'll need CWM 6.0.4.4 or newer. I am currently working on a utility for older CWM versions to be able to install KitKat but until then you'll need what I just mentioned. If not too interested in KitKat then you can leave your recovery as is. I use CWM 5.0.2.7 Touch by @vivekkalady. I've been using her recovery since she introduced it.
3 - You'll have to search and make that decision for yourself as we all have different needs and habits.

shinobisoft said:
1 - Actually upgrading baseband on that device would lock you out of some frequencies the radio ( not the FM radio ) uses to communicate with the carriers towers. I also have a Optimus T ( P509 ), tho no longer in service.
2 - Depends if you want KitKat ( 4.4 ). If you do then you'll need CWM 6.0.4.4 or newer. I am currently working on a utility for older CWM versions to be able to install KitKat but until then you'll need what I just mentioned. If not too interested in KitKat then you can leave your recovery as is. I use CWM 5.0.2.7 Touch by @vivekkalady. I've been using her recovery since she introduced it.
3 - You'll have to search and make that decision for yourself as we all have different needs and habits.
Click to expand...
Click to collapse
That's interesting what you said about the current baseband, I'm not sure if I changed it after I last used it. But I turned off airplane mode and popped in a T-mob sim and it wasn't able to connect to a network, similar results with H2O wireless card (at&t mvno). I'm not sure if my current version of android is messed up or the baseband.
I don't mind upgrading CWM, is there any downside to doing so? Is there a kitkat build out now that works? I may want to use KitKat as I hear it's meant to be more usable on smaller memory systems like the p509.
I don't mind finding one I like eventually, but looking for a recommendation to start off with that should work without too much difficulty.
Thanks for you help so far, I hope if can figure out this cell network problem :-/

shivanani said:
That's interesting what you said about the current baseband, I'm not sure if I changed it after I last used it. But I turned off airplane mode and popped in a T-mob sim and it wasn't able to connect to a network, similar results with H2O wireless card (at&t mvno). I'm not sure if my current version of android is messed up or the baseband.
I don't mind upgrading CWM, is there any downside to doing so? Is there a kitkat build out now that works? I may want to use KitKat as I hear it's meant to be more usable on smaller memory systems like the p509.
I don't mind finding one I like eventually, but looking for a recommendation to start off with that should work without too much difficulty.
Thanks for you help so far, I hope if can figure out this cell network problem :-/
Click to expand...
Click to collapse
Either your APN settings are wrong, which you can manually fix, or you did upgrade/downgrade/change baseband. The P509 is supposed to be an old baseband phone. The P500 and P509 are identical. Only difference is the P500 is a new baseband device. You can flash a P500 ROM. If you don't get any signal, then most likely your on old baseband. There is a patch for that, no biggie. If you do get signal then you're on new baseband and you should continue to use P500 ROMs. If you decide to flash a P509 ROM you won't have any service which will be a baseband issue. There is a new baseband patch around here somewhere too.
You can find a link to the old baseband patch in the LG Optimus One FAQ. Post #8 or #9, I think.

shinobisoft said:
Either your APN settings are wrong, which you can manually fix, or you did upgrade/downgrade/change baseband. The P509 is supposed to be an old baseband phone. The P500 and P509 are identical. Only difference is the P500 is a new baseband device. You can flash a P500 ROM. If you don't get any signal, then most likely your on old baseband. There is a patch for that, no biggie. If you do get signal then you're on new baseband and you should continue to use P500 ROMs. If you decide to flash a P509 ROM you won't have any service which will be a baseband issue. There is a new baseband patch around here somewhere too.
You can find a link to the old baseband patch in the LG Optimus One FAQ. Post #8 or #9, I think.
Click to expand...
Click to collapse
I wasn't certain what my starting point was since I'd done this so long ago (and I thought I applied the old BB fix at some point too...). Anyways, I took a drastic step and installed the stock rom V10s_00.kdz with the kdz installer from LG. It successfully flashed and I don't have a brick on my hands
The problem is now the phone doesn't recognize any sim cards, of which I've tried 3: tmobile micro, h2o micro, and a gophone minisim. The microsims were put in a cut out minisim as an adapter. The gophone is a normal minisim that is uncut, but it's not activated. I never got a locked or bad sim message, just that there is no sim card in place.
Under phone status it shows a signal strength (varies -65 to -75 and 25 asu)
Under APN settings it matches the T-mobile ones
And the baseband via secret menu is amss6038
I'm wondering if the sim module or gsm module are messed up? I kinda want to try out the emergency calling but would rather not get the police involved

I messed up my SIM contacts when I left an adapter in there and pulled it a little too hard out! I removed the compression plate on the back and it works again. I'll have to get a small piece of electronic safe foam to apply pressure to the back of the SIM to keep it in proper position. (http://forum.xda-developers.com/showthread.php?t=2598308)
I'm interested in the kitkat build here: http://forum.xda-developers.com/showthread.php?t=2589303
If I were to want to use that, do I need to flash the baseband fix on top of the other install instructions? Anything special in terms of timing it at a certain point in the install process?
Thanks for your help so far, I forgot how much fun messing with android was :laugh:

shivanani said:
I messed up my SIM contacts when I left an adapter in there and pulled it a little too hard out! I removed the compression plate on the back and it works again. I'll have to get a small piece of electronic safe foam to apply pressure to the back of the SIM to keep it in proper position. (http://forum.xda-developers.com/showthread.php?t=2598308)
I'm interested in the kitkat build here: http://forum.xda-developers.com/showthread.php?t=2589303
If I were to want to use that, do I need to flash the baseband fix on top of the other install instructions? Anything special in terms of timing it at a certain point in the install process?
Thanks for your help so far, I forgot how much fun messing with android was :laugh:
Click to expand...
Click to collapse
Well, we still aren't sure if your device is new or old baseband. With the recovery you already have, flash CM10.1, CM10.2, or CM10.3 ( All JellyBean ). Latest CM10.2 builds can be downloaded here. Easiest way to work around the baseband thing is to figure out which ROMs, P500 or P509, that will give you cell service. Flash a P509 ROM. If no service then you upgraded baseband so you'll need to use P500 ROMs. Flash a P500 ROM and if no service then you're on old baseband and you should use P509 ROMs. Only difference between P500 and P509 ROMs is the P500 ROMs are NEW baseband and the P509 ROMs are OLD baseband.
As of now the only KitKat ROMs being build are for the P500. If you find you are OLD baseband, flash the oldbb fix from the FAQ I mentioned a couple posts back. Oh, and you'll need the newest CWM 6.0.4.4 or newer recovery to flash KitKat.
Hope all this helps...

shinobisoft said:
Well, we still aren't sure if your device is new or old baseband. With the recovery you already have, flash CM10.1, CM10.2, or CM10.3 ( All JellyBean ). Latest CM10.2 builds can be downloaded here. Easiest way to work around the baseband thing is to figure out which ROMs, P500 or P509, that will give you cell service. Flash a P509 ROM. If no service then you upgraded baseband so you'll need to use P500 ROMs. Flash a P500 ROM and if no service then you're on old baseband and you should use P509 ROMs. Only difference between P500 and P509 ROMs is the P500 ROMs are NEW baseband and the P509 ROMs are OLD baseband.
As of now the only KitKat ROMs being build are for the P500. If you find you are OLD baseband, flash the oldbb fix from the FAQ I mentioned a couple posts back. Oh, and you'll need the newest CWM 6.0.4.4 or newer recovery to flash KitKat.
Hope all this helps...
Click to expand...
Click to collapse
Well, I'm on the old baseband, the reason I know is I used KDZ to nuke it back to p509 stock! The more I read about kdz after I did it the more scared I got, but I lucked out and everything is fine now
The sim unlock is preserved, and I successfully rooted it with gingersnap. I don't have any sort of recover on it yet, it looks like CWM 6.0.4.4 does not work with older roms, just Kitkat based ones. So I'll do some more homework and figure out if I want to jump right into KK or try JB first.
Thanks for all your help, you gave me a quick jumpstart and brought back a lot of knowledge that was tucked away in the back corner of my brain!

shinobisoft said:
Well, we still aren't sure if your device is new or old baseband. With the recovery you already have, flash CM10.1, CM10.2, or CM10.3 ( All JellyBean ). Latest CM10.2 builds can be downloaded here. Easiest way to work around the baseband thing is to figure out which ROMs, P500 or P509, that will give you cell service. Flash a P509 ROM. If no service then you upgraded baseband so you'll need to use P500 ROMs. Flash a P500 ROM and if no service then you're on old baseband and you should use P509 ROMs. Only difference between P500 and P509 ROMs is the P500 ROMs are NEW baseband and the P509 ROMs are OLD baseband.
As of now the only KitKat ROMs being build are for the P500. If you find you are OLD baseband, flash the oldbb fix from the FAQ I mentioned a couple posts back. Oh, and you'll need the newest CWM 6.0.4.4 or newer recovery to flash KitKat.
Hope all this helps...
Click to expand...
Click to collapse
CM10.3
Sent from my GT-I9082 using Tapatalk

[Q] No service, tried everything

I got a p500h from my friend since my razr droid died and I needed something to hold me over until I can save up for the note3. It had 2.2 on it so I flashed CM 10.1 for 4.2.2. When I put my sim card in I had no service.
I checked the baseband and it was unknown so I flashed it for v.20 and it appeared but I still get no service.
I don't have gapps installed because I don't really need it.
And that's pretty much it. I can't think of anything else to try, can someone help? I'm using a non-smart phone in the meantime and it is quite terrible.

Try the old Baseband fix, that did it for me some years ago, not sure if you need the v10 baseband coming from 2.2 but the fix should work. You can find it here on the Forum.
If nothing works, use kdz to flash the Stock Rom and start over.

Bartlebyxxx said:
Try the old Baseband fix, that did it for me some years ago, not sure if you need the v10 baseband coming from 2.2 but the fix should work. You can find it here on the Forum.
If nothing works, use kdz to flash the Stock Rom and start over.
Click to expand...
Click to collapse
Thanks, I wanted to try that but when I go to download the milk_os fix at the bottom of this page
http://forum.xda-developers.com/showpost.php?p=14743798&postcount=2
I get redirected to some bull****(lp.downloadsetup.net)
And I just don't trust this thing, is this really what I'm suppose to download?

Is definitely the fault of baseband. Some rom is incompatible with any type of baseband. Try to download from play store an application with baseband-ril match...

Toxic_Ninja said:
I got a p500h from my friend since my razr droid died and I needed something to hold me over until I can save up for the note3. It had 2.2 on it so I flashed CM 10.1 for 4.2.2. When I put my sim card in I had no service.
I checked the baseband and it was unknown so I flashed it for v.20 and it appeared but I still get no service.
I don't have gapps installed because I don't really need it.
And that's pretty much it. I can't think of anything else to try, can someone help? I'm using a non-smart phone in the meantime and it is quite terrible.
Click to expand...
Click to collapse
Sounds like you have an old baseband phone, but you flashed a new baseband ROM on it. In that case, simply flash the zip indicated below (I suggest you mount /system in recovery before flashing, even though the script auto-mounts /system, just to be sure). I'm attaching two zips for the sake of completeness; the one you want is the Use_New_BB_ROMS.zip.
Use_New_BB_ROMS.zip -- Flash this zip if you're trying to use a new baseband ROM on a phone that uses the old baseband. If you have no network on 2.3 and above ROMS, your phone probably uses the old baseband, so this is the zip you need.
Use_Old_BB_ROMS.zip -- Flash this zip if you're trying to use an old baseband ROM on a phone that uses the new baseband. If you have no network on 2.2 and below ROMS, your phone probably uses the new baseband, so this is the zip you need.

Syd_M said:
Sounds like you have an old baseband phone, but you flashed a new baseband ROM on it. In that case, simply flash the zip indicated below (I suggest you mount /system in recovery before flashing, even though the script auto-mounts /system, just to be sure). I'm attaching two zips for the sake of completeness; the one you want is the Use_New_BB_ROMS.zip.
Use_New_BB_ROMS.zip -- Flash this zip if you're trying to use a new baseband ROM on a phone that uses the old baseband. If you have no network on 2.3 and above ROMS, your phone probably uses the old baseband, so this is the zip you need.
Use_Old_BB_ROMS.zip -- Flash this zip if you're trying to use an old baseband ROM on a phone that uses the new baseband. If you have no network on 2.2 and below ROMS, your phone probably uses the new baseband, so this is the zip you need.
Click to expand...
Click to collapse
I tried to flash it but I get an error: can't copy META-INF/com/google/android/updated-binary
Should I be wiping cache for this? Dalvik cache?
I used LGMDP-v1.5 to get bb v.20 on my phone in the first place, I tried to do the same with v.10 after v.20 didn't work but it just went back to baseband unknown. when I tried to download the milk_os fix it just linked me to some phishing page.

What recovery are you using? I've tried with AmonRa & CWM 5.0.2.0 and both work. Other CWM versions will probably work, too. Haven't tried with TWRP.
If this flashed successfully but you still don't have service, then you might have borked something when changing baseband in KDZ. If that's the case, then hopefully others will be able to help you as I've never touched KDZ myself.
____________________
Sent from the moon.

Toxic_Ninja said:
I got a p500h from my friend since my razr droid died and I needed something to hold me over until I can save up for the note3. It had 2.2 on it so I flashed CM 10.1 for 4.2.2. When I put my sim card in I had no service.
I checked the baseband and it was unknown so I flashed it for v.20 and it appeared but I still get no service.
I don't have gapps installed because I don't really need it.
And that's pretty much it. I can't think of anything else to try, can someone help? I'm using a non-smart phone in the meantime and it is quite terrible.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2616412 <-- go here..i prefer you to use twrp.. hit thanks if i helped.

Syd_M said:
What recovery are you using? I've tried with AmonRa & CWM 5.0.2.0 and both work. Other CWM versions will probably work, too. Haven't tried with TWRP.
If this flashed successfully but you still don't have service, then you might have borked something when changing baseband in KDZ. If that's the case, then hopefully others will be able to help you as I've never touched KDZ myself.
Click to expand...
Click to collapse
I was using CWM 5.0.2.0, and I've never touched KDZ.
voltaire23 said:
http://forum.xda-developers.com/showthread.php?t=2616412 <-- go here..i prefer you to use twrp.. hit thanks if i helped.
Click to expand...
Click to collapse
I tried it, here's what happened.
First I just flashed it, I checked the baseband, it was unknown. Previously it was v.20 so I tried flashing in v.10 since this was a fix for v.10 AFAIK
Still unknown.
Tried flashing the fix again just to overwrite whatever it needed to overwrite and still unknown.
I'm back to square 1 on this one.

Toxic_Ninja said:
I was using CWM 5.0.2.0, and I've never touched KDZ.
I tried it, here's what happened.
First I just flashed it, I checked the baseband, it was unknown. Previously it was v.20 so I tried flashing in v.10 since this was a fix for v.10 AFAIK
Still unknown.
Tried flashing the fix again just to overwrite whatever it needed to overwrite and still unknown.
I'm back to square 1 on this one.
Click to expand...
Click to collapse
forum.xda-developers.com/showthread.php?t=2559363 dude i think you did something which is not good.. i require you to restore ur stock rom with the link i gave.. or if ur affraid of kdz use odin.
if ur back with the stock rom never upgrade your baseband again..when u flash a custom rom with new baseband needed just simply flash the baseband fix i gave you..
---------- Post added at 12:37 AM ---------- Previous post was at 12:35 AM ----------
Toxic_Ninja said:
I was using CWM 5.0.2.0, and I've never touched KDZ.
I tried it, here's what happened.
First I just flashed it, I checked the baseband, it was unknown. Previously it was v.20 so I tried flashing in v.10 since this was a fix for v.10 AFAIK
Still unknown.
Tried flashing the fix again just to overwrite whatever it needed to overwrite and still unknown.
I'm back to square 1 on this one.
Click to expand...
Click to collapse
dude i think you did something which is not good.. i require you to restore ur stock rom with the link i gave.. or if ur affraid of kdz use odin.
if ur back with the stock rom never upgrade your baseband again..when u flash a custom rom with new baseband needed just simply flash the baseband fix i gave you..
forum.xda-developers.com/showthread.php?t=2559363