I got a p500h from my friend since my razr droid died and I needed something to hold me over until I can save up for the note3. It had 2.2 on it so I flashed CM 10.1 for 4.2.2. When I put my sim card in I had no service.
I checked the baseband and it was unknown so I flashed it for v.20 and it appeared but I still get no service.
I don't have gapps installed because I don't really need it.
And that's pretty much it. I can't think of anything else to try, can someone help? I'm using a non-smart phone in the meantime and it is quite terrible.
Try the old Baseband fix, that did it for me some years ago, not sure if you need the v10 baseband coming from 2.2 but the fix should work. You can find it here on the Forum.
If nothing works, use kdz to flash the Stock Rom and start over.
Bartlebyxxx said:
Try the old Baseband fix, that did it for me some years ago, not sure if you need the v10 baseband coming from 2.2 but the fix should work. You can find it here on the Forum.
If nothing works, use kdz to flash the Stock Rom and start over.
Click to expand...
Click to collapse
Thanks, I wanted to try that but when I go to download the milk_os fix at the bottom of this page
http://forum.xda-developers.com/showpost.php?p=14743798&postcount=2
I get redirected to some bull****(lp.downloadsetup.net)
And I just don't trust this thing, is this really what I'm suppose to download?
Is definitely the fault of baseband. Some rom is incompatible with any type of baseband. Try to download from play store an application with baseband-ril match...
Toxic_Ninja said:
I got a p500h from my friend since my razr droid died and I needed something to hold me over until I can save up for the note3. It had 2.2 on it so I flashed CM 10.1 for 4.2.2. When I put my sim card in I had no service.
I checked the baseband and it was unknown so I flashed it for v.20 and it appeared but I still get no service.
I don't have gapps installed because I don't really need it.
And that's pretty much it. I can't think of anything else to try, can someone help? I'm using a non-smart phone in the meantime and it is quite terrible.
Click to expand...
Click to collapse
Sounds like you have an old baseband phone, but you flashed a new baseband ROM on it. In that case, simply flash the zip indicated below (I suggest you mount /system in recovery before flashing, even though the script auto-mounts /system, just to be sure). I'm attaching two zips for the sake of completeness; the one you want is the Use_New_BB_ROMS.zip.
Use_New_BB_ROMS.zip -- Flash this zip if you're trying to use a new baseband ROM on a phone that uses the old baseband. If you have no network on 2.3 and above ROMS, your phone probably uses the old baseband, so this is the zip you need.
Use_Old_BB_ROMS.zip -- Flash this zip if you're trying to use an old baseband ROM on a phone that uses the new baseband. If you have no network on 2.2 and below ROMS, your phone probably uses the new baseband, so this is the zip you need.
Syd_M said:
Sounds like you have an old baseband phone, but you flashed a new baseband ROM on it. In that case, simply flash the zip indicated below (I suggest you mount /system in recovery before flashing, even though the script auto-mounts /system, just to be sure). I'm attaching two zips for the sake of completeness; the one you want is the Use_New_BB_ROMS.zip.
Use_New_BB_ROMS.zip -- Flash this zip if you're trying to use a new baseband ROM on a phone that uses the old baseband. If you have no network on 2.3 and above ROMS, your phone probably uses the old baseband, so this is the zip you need.
Use_Old_BB_ROMS.zip -- Flash this zip if you're trying to use an old baseband ROM on a phone that uses the new baseband. If you have no network on 2.2 and below ROMS, your phone probably uses the new baseband, so this is the zip you need.
Click to expand...
Click to collapse
I tried to flash it but I get an error: can't copy META-INF/com/google/android/updated-binary
Should I be wiping cache for this? Dalvik cache?
I used LGMDP-v1.5 to get bb v.20 on my phone in the first place, I tried to do the same with v.10 after v.20 didn't work but it just went back to baseband unknown. when I tried to download the milk_os fix it just linked me to some phishing page.
What recovery are you using? I've tried with AmonRa & CWM 5.0.2.0 and both work. Other CWM versions will probably work, too. Haven't tried with TWRP.
If this flashed successfully but you still don't have service, then you might have borked something when changing baseband in KDZ. If that's the case, then hopefully others will be able to help you as I've never touched KDZ myself.
____________________
Sent from the moon.
Toxic_Ninja said:
I got a p500h from my friend since my razr droid died and I needed something to hold me over until I can save up for the note3. It had 2.2 on it so I flashed CM 10.1 for 4.2.2. When I put my sim card in I had no service.
I checked the baseband and it was unknown so I flashed it for v.20 and it appeared but I still get no service.
I don't have gapps installed because I don't really need it.
And that's pretty much it. I can't think of anything else to try, can someone help? I'm using a non-smart phone in the meantime and it is quite terrible.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2616412 <-- go here..i prefer you to use twrp.. hit thanks if i helped.
Syd_M said:
What recovery are you using? I've tried with AmonRa & CWM 5.0.2.0 and both work. Other CWM versions will probably work, too. Haven't tried with TWRP.
If this flashed successfully but you still don't have service, then you might have borked something when changing baseband in KDZ. If that's the case, then hopefully others will be able to help you as I've never touched KDZ myself.
Click to expand...
Click to collapse
I was using CWM 5.0.2.0, and I've never touched KDZ.
voltaire23 said:
http://forum.xda-developers.com/showthread.php?t=2616412 <-- go here..i prefer you to use twrp.. hit thanks if i helped.
Click to expand...
Click to collapse
I tried it, here's what happened.
First I just flashed it, I checked the baseband, it was unknown. Previously it was v.20 so I tried flashing in v.10 since this was a fix for v.10 AFAIK
Still unknown.
Tried flashing the fix again just to overwrite whatever it needed to overwrite and still unknown.
I'm back to square 1 on this one.
Toxic_Ninja said:
I was using CWM 5.0.2.0, and I've never touched KDZ.
I tried it, here's what happened.
First I just flashed it, I checked the baseband, it was unknown. Previously it was v.20 so I tried flashing in v.10 since this was a fix for v.10 AFAIK
Still unknown.
Tried flashing the fix again just to overwrite whatever it needed to overwrite and still unknown.
I'm back to square 1 on this one.
Click to expand...
Click to collapse
forum.xda-developers.com/showthread.php?t=2559363 dude i think you did something which is not good.. i require you to restore ur stock rom with the link i gave.. or if ur affraid of kdz use odin.
if ur back with the stock rom never upgrade your baseband again..when u flash a custom rom with new baseband needed just simply flash the baseband fix i gave you..
---------- Post added at 12:37 AM ---------- Previous post was at 12:35 AM ----------
Toxic_Ninja said:
I was using CWM 5.0.2.0, and I've never touched KDZ.
I tried it, here's what happened.
First I just flashed it, I checked the baseband, it was unknown. Previously it was v.20 so I tried flashing in v.10 since this was a fix for v.10 AFAIK
Still unknown.
Tried flashing the fix again just to overwrite whatever it needed to overwrite and still unknown.
I'm back to square 1 on this one.
Click to expand...
Click to collapse
dude i think you did something which is not good.. i require you to restore ur stock rom with the link i gave.. or if ur affraid of kdz use odin.
if ur back with the stock rom never upgrade your baseband again..when u flash a custom rom with new baseband needed just simply flash the baseband fix i gave you..
forum.xda-developers.com/showthread.php?t=2559363
Related
It has been FOREVER since I have messed with my G2x. But lately it has been super laggy, the keyboard never picks up what key I pressed properly, and the accelerometer is a MESS.
Im currently on March 2011 baseband, Android Version 2.3.7, and a very, very old nightly.
Im looking to update to the newest baseband as I hear it is a huge improvement, and also try out an ICS rom. I have been browsing and reading up, but am so rusty on reverting and flashing.
Would the proper, easy way to do this be as follows:? This is what I've gathered from reading, just don't want to brick my phone for a stupid reason.
1)Flash a stock ROM - Full Factory Wipe
2)Update baseband with LG Update Tool
3)Root Phone again
4)Flash Custom ROM?
Also, can you revert to stock ROM without an external SD card? I was reading a few topics stating you can't. I also have a backup of the original stock ROM(or at least I think) from a very, very long time ago. Can I just restore that?
I apologize in advance for all the questions, just trying to refresh my memory on this entire process.
from what ive seen, after getting cwm on your phone via nv flash you install one of the ics roms then before rebooting the phone you have to install a fix via cwm that owain has on one of rom pages (domination i think) then you are good to go. and yes, you have to use an external sd card for all of this.
After updating baseband you will lose root as well as CWM. You need to put it back on before you can flash a custom rom on it.
cricketAC said:
After updating baseband you will lose root as well as CWM. You need to put it back on before you can flash a custom rom on it.
Click to expand...
Click to collapse
Ahh thank you! And I can not run the tool from a custom rom, correct? I have to flash back to stock, and then the updater will update baseband as well as unroot everything.
I also dont have an external SD card, so I guess I will be buying one to flash back to stock
Hi all,
Flashed a new ROM for the very first time and I guess I've screwed up something.
I flashed the stable version of CyanogenMod 7.2. Everything seems to be running fine EXCEPT my sim-card is NOT being detected!
Cant find any network. Also the new ROM has completely wiped out my IMEI no. (That could be the source of the problem, dont know.)
Also, I really dont know my current or previous baseband,, err newbie!( maybe thats the cause of problem)...
Pls somebody HELP!
PS. my phone aint carrier specific and was earlier running on 2.2.1(if it helps )
Baseband problem, you was on a Froyo (10b-e) baseband, CM7 requires the 20G baseband, restoring a Nandroid should work. If you haven't got one. Then you will be using the LG flasher, good luck!
There's a baseband fix script lying around the forums somewhere that should allow new baseband ROMs to work for you. Search for something called "bbfix", or something like that.
----------
Sent from the moon.
Yeah... Im having the same problems with the SD Card and I just cant install any rom... I tried everything and it wont work ;(
Go to this thread:
http://forum.xda-developers.com/showthread.php?t=1444328
Look for "Old Baseband Fix" in the first post
Or you can just use this link, which is from the first post:
http://www.mediafire.com/?tjyibxdbqyyrmwz
Flash it in recovery and see if that works
Hello all,
Okay, I admit that I am gonna get a lot of "use the search tool first" replies, but please hear me out. I have done my fair share of searching. Its not that I haven't found anything, its just the things I found are useless for this SGS 4G. I really wanted to install Cyanogen Mo on the SGS (its not actually mine, a friend asked me to do it since he saw my old SGS GT-I9000 running CM).
I am gonna try and give a detailed report . The phone was originally from T-Mobile and now unlocked permanently. Its running firmware version 2.3.3 that I installed just recently. I found out that I can't install CWM on the stock kernel or bootloader or whatever and I needed a new of the thing. So I went on searching and searching....found a handful of help but none work. Every method breaks at some point and I go to the "firmware update failed" thing on the phone, which I then install 2.3.3 again using ODIN and try another method. I have tried a lot of things. Hemidall, ODIN, SuperOneClick, and a lot of gibbrish-sounding methods. None work. I am now running 2.3.3. Here are some infos:
ABOUT PHONE:
Model Number: SGH-T959V
Firmware Version: 2.3.3
Baseband Version: T959VUVKF1
Kernel Version: 2.6.35.7-T959VUVKF1-CL270364
Build Number: GINGERBREAD.VUVKF1
The files I used to flash to 2.3.3 using ODIN v1.85:
PIT: Hawk_Sidekick_VibrantPlus_831.pit
PDA: CODE_T959VUVKF1_CL270364_REV00_user_low_noship.tar.md5
PHONE: T959VUVKF1-Phone-CL1020302.tar.md5
CSC: SGH-T959V-CSC-TMB-VIBRANTP.tar.md5
I hope the above infos are enough. So, can anyone help me and point me to the right direction on how to install CWM and then install CM10 or 9 on my friends SGS 4G?
Thanks,
Tamrat
Hmmm, an interesting set of binaries, ones that don't ring a bell with me. I'm used to seeing T959VUVKJ6.
Where did you find those? Half curiosity, half trying to understand the problem, half since much of the "old" images for the phones got lost when Multiupload and what have you were shut down.
For the SGS4G, the kernel, root file system, and recovery file system are all in "boot.img" -- flash one, you flash them all. They can be flashed through Odin (assuming you really like Windows), heimdall (multi-platform), through recovery, or from a root command line (for the adventurous only).
I would say the most robust way to get where you need to be would be to use Lumin's guide to make sure you've got a viable Gingerbread set-up going, then flash something reliable to get you to MTD, like TeamAcid's CM9.
From there, you should know that some of the KK ROMs use slightly different MTD partitioning and aren't a "just flash this ROM and keep your data" kind of thing.
jeffsf said:
Hmmm, an interesting set of binaries, ones that don't ring a bell with me. I'm used to seeing T959VUVKJ6.
Where did you find those? Half curiosity, half trying to understand the problem, half since much of the "old" images for the phones got lost when Multiupload and what have you were shut down.
Click to expand...
Click to collapse
A long day Googling... and then a site turned up. One thing I forgot to mention was, before I installed this firmware, I had to use the "remove battery->plug usb->press the button combos->insert the battery" to enter download mode, but now I juts have to press vol down and power button.
Thanks for the reply,
Failure again
UPDATE:::
I tried to update to 2.3.6 as the guide suggests and I also wanted a clean stock OS in case the old one was not. But once again updating to 2.3.6 has been a pain. Kies Mini recognizes the phone but it doesn't recognize the firmware running on the phone. And also, firmware update is impossible since the button is greyed out.
I googled again and found the official 2.3.6 firmware for the phone (file name: T959VUVKJ6-REV00-home-low-CL694130.tar.md5) and tried flashing it using ODIN; absolutely no luck. It fails at the stage which says Slb.bin. Restarting the phone after that gives a "firmware upgrade failure" display. Only way to wake up the phone is to flash the previous OS back.
I am really confused here.
*********************EDIT***************
Some how, after like 10 retires and fiddling with ODIN, it finally flashed 2.3.6 to the SGS 4G. Still, fingers crossed.
*********************EDIT 2***************
Finally, its all working fine now. Thank you @jeffsf, thank you very much.
F*****************K
forgot an important step and now my IEMI number is gone........
do i throw the phone now, or is there any other way???
Don't throw your phone away! How do you know that you have "no IMEI" on your phone? We'll go from there.
Hopefully, you've backed up your data before starting to play around with ROMS. If so just load your backed up efs folder onto your storage & use Root Explorer to drop it over your existing one , it will overwrite your imei file & you will be good as new.
========================================================================================
I'm also in need of help, I have been running SlimSaber since last weekend, was wanting to try out Beanstalk. First full wipe, install & reboot wipe again, reinstall etc as per Dao's OP, but after the first install, it won't boot past the kernel splash. Tried again with same result. Decided to click it back to stock & start over, using Gremlin Remover (odin). Then saw that others were having similar issue so I tried to load in build from April1st.
But now it only boots back into recovery, won't boot to the OS ( everything indicated install was complete & no errors.)
1 clicked back again & just tried to put SlimSaber back on again, but have the same problem, will only boot into recovery.
I had to first load CM9 to get CWM 6.xx so I could install kk using TWRP
What am I not doing correctly? Thanks for any suggestions.
Flash kernel
Reboot recovery
Wipe all partitions
(Reboot recovery for good measure and wipe again if paranoid)
Install
Boot
If that doesn't do it, it is likely ROM or hardware.
---
Posted from whatever phone booted today
Since this is running GB VUVKG4, could you recommend a kernel that would work & get me to TWRP (or CWM 5.xx+)?
Either the Team Acid CM9 or Hefe Kernel should work.
---
Posted from whatever phone booted today
Hi to everyone,
I have this unusual rom in my phone, as I have read through the internet, the XXU1 stands for a HongKong region.
The problem is, that there's nothing about such ROM on the internet, as if it never existed...
The phone was bought as new through online shop..
It has been unlocked through idoneapps. I use it in Europe. GSM and MOBILE data worked fine until I forced to update it through ODIN to G900PVPS3CPK1.
I was able to get the GSM to work, but the WCDMA network isn't available.. and the messages are split into pieces when I send them. As I've read, that is how they're sent in US.
I had tried many if not all of the roms, modems, kernels etc.. available in this SPRINT galaxy s5 thread..
but none gave me back the mobile network 4G.
So I was wondering if anyone has heard anything about such ROM (my original one) or where I could look for it? Maybe you have an idea what to do?
I searched for you. Here is the result.
https://samsung-firmware.org/download/Galaxy S5 (Snapdragon)/5998/ITV/G900FXXU1BOD3/G900FITV1BOD2/
This page explains it all.
I think you remembered a character wrong, it is an F, not a P. if it is really a P, and you are sure your device model is SM-G900P, then you must buy a new phone with a wrong ROM. I don't think that happens a lot. G900P never has a G900PXXU1BOD3 ROM. I think you flashed a WRONG ROM in the first place. DO NOT flash the ROM in this post until you confirm that your phone's Model Number(you can check this yourself in Settings, About device) is SM-G900F.
Thanks for your response. The sad thing is that the phone is G900P. I have attached the screenshot below. I have made a full TWRP recovery of the rom before doing any flashing. I am able to restore it all except the modem, as TWRP doesn't restore modems.
If I put a newer ROM bootloader and modem and restore the backup - I get a bootloop. If i put an older one I get no signal and the lower buttons arent working. Though I found BOG1 modem to work with my current firmware, but it's not fluent. The phone feels laggy and GPS isn't working...
So I am looking for a complete rom that could work in this phone without any recovery..
Can you find ok4?? Runs awesome for me, use Odin to flash it, you'll lose twrp but then Odin twrp
apexnx said:
Thanks for your response. The sad thing is that the phone is G900P. I have attached the screenshot below. I have made a full TWRP recovery of the rom before doing any flashing. I am able to restore it all except the modem, as TWRP doesn't restore modems.
If I put a newer ROM bootloader and modem and restore the backup - I get a bootloop. If i put an older one I get no signal and the lower buttons arent working. Though I found BOG1 modem to work with my current firmware, but it's not fluent. The phone feels laggy and GPS isn't working...
So I am looking for a complete rom that could work in this phone without any recovery..
Click to expand...
Click to collapse
Sorry for the late reply, you didn't quote me, so I did not get the notification that you have replied.
It's very weird that your bought G900P with a G900F ROM. G900P doesn't support WCDMA network, I don't know if it's blocked by software. But the link in my last post indicates that your reseller flashed G900PXXU1BOD3 for you in order to make WCDMA work. I don't know if you can simply flash official G900PXXU1BOD3, because the system with your phone may be modified in the first place. If you simply want to restore original backup with modem, drop back to TWRP 3.0.2-1 or 3.0.2-0, 3.0.2-1 wouldn't mount external SD card so you have to move your backup to internal storage, I didn't test 3.0.2-0 but I assume it's the least buggy recovery for G900P so far.
yueyejinghun said:
Sorry for the late reply, you didn't quote me, so I did not get the notification that you have replied.
It's very weird that your bought G900P with a G900F ROM. G900P doesn't support WCDMA network, I don't know if it's blocked by software. But the link in my last post indicates that your reseller flashed G900PXXU1BOD3 for you in order to make WCDMA work. I don't know if you can simply flash official G900PXXU1BOD3, because the system with your phone may be modified in the first place. If you simply want to restore original backup with modem, drop back to TWRP 3.0.2-1 or 3.0.2-0, 3.0.2-1 wouldn't mount external SD card so you have to move your backup to internal storage, I didn't test 3.0.2-0 but I assume it's the least buggy recovery for G900P so far.
Click to expand...
Click to collapse
My mistake,
I believe I had tried to restore backup with those versions of TWRP. They don't restore the modem part and give me an eror (can't remember exactly how it sounds), but as far as I have read, TWRP does not restore modem. It is impossible. So I can only flash it by ODIN, but there is no such G900PXXU1BOD3 modem on the internet..
I wonder, what if I would simply flash the G900FXXU1BOD3 or never rom with F symbol, could it work out for me? Maybe you have read about someone doing that? So far its my only hope...
apexnx said:
My mistake,
I believe I had tried to restore backup with those versions of TWRP. They don't restore the modem part and give me an eror (can't remember exactly how it sounds), but as far as I have read, TWRP does not restore modem. It is impossible. So I can only flash it by ODIN, but there is no such G900PXXU1BOD3 modem on the internet..
I wonder, what if I would simply flash the G900FXXU1BOD3 or never rom with F symbol, could it work out for me? Maybe you have read about someone doing that? So far its my only hope...
Click to expand...
Click to collapse
I don't know if someone deliberately flash a stock G900F ROM to G900P, it would have most likely bricked the device. But I have noticed a slight difference between the 2 pictures you posted, first 1 says baseband version is G900PXXU1BOD3, idoneapps says it's G900PVPU3BOG1, I don't know which one is more accurate. I couldn't find a seperated modem file of G900FXXU1BOD3, yet there is a way to extract it yourself, simply change filename extension md5 to tar and open it with compression software. After flash modem, restore your backup.
Edit 1: Maybe you need to flash CSC also when you flash modem. But no rush, just try modem only first.
sammobile.com/firmwares is the only real legit place to get firmwares
Help me!
Hello,
Curiously I have the same problem, I bought the mobile by Ebay to a Hong Kong user and it comes rooted and with problems I do not know how to solve, from the beginning the camera did not focus until suddenly by magic, it focused.
Now I want to do a ROM restoration but I am not able to find that version since from what I see in the answers you have offered here seems to be "trick", have you found any solution? I would appreciate it if you told me so please.
Thank you.
A greeting.
Hello everyone, this is my first post, after having read a lot in this forum already.
tl;dr: I flashed several ROMs onto the phone and always had the same problem: Connection to network goes away completely when mobile data is turned on. My baseband is S7652XXMA1 for which I cannot find a stock rom. Don't know what to do now.
Comprehensive description:
So I got a Samsung Galaxy S Duos (GT-S7652) and thought I flash some fancy ROM on it to gather some experience before I go and try with my main phone. So I installed TWRP, which went fine, then I flashed PMP Light ROM, because I read that would improve the performance and I liked the ROM.
The problem is, that as soon as I turn on the mobile data, the phone loses network. I double checked APN settings and tried the same SIM card with my other phone and those settings and everything works fine.
I tried to flash back Stock ROMs, but the problem stays the same.
Now I see two potential sources:
1. Baseband of my phone is S7652XXMA1 and I cannot find the right stock rom for this (although I tried some other Stock ROMs, because I thought they would change the baseband, which they did not)
2. When flashing process reaches the fat.bin (which I read contains the baseband) it gives me an error:
Code:
99%
100%
ERROR: Failed to confirm end of file transfer sequence!
ERROR: FAT upload failed!
Does anyone know how to proceed? Does anyone know where to get a Stock ROM for this Baseband S7562XXMA1? All help is much appreciated
Ok, telephony also doesn't work, if one tries it loses network just as in the mobile data case.
Has no one any ideas, how I could overwrite the Baseband?
Try cm11 with Hungarian baseband.
Is network working on phone properly?
You can also try to flash indian baseband, but keep a backup of old baseband
Wifi works without problems, for mobile network see my posts above.
I have not kept a backup, as I thought just reinstalling stock rom would bring me back to original.
Why do you recommend to flash Hungarian Baseband cm11, so far no baseband rom could overwrite my fat.bin, what does this do differently?
Toppar said:
Wifi works without problems, for mobile network see my posts above.
I have not kept a backup, as I thought just reinstalling stock rom would bring me back to original.
Why do you recommend to flash Hungarian Baseband cm11, so far no baseband rom could overwrite my fat.bin, what does this do differently?
Click to expand...
Click to collapse
Which rom are u using?
Hungarian baseband works for everyone without bugs.
Did you try indian baseband?
Ritik99 said:
Which rom are u using?
Hungarian baseband works for everyone without bugs.
Did you try indian baseband?
Click to expand...
Click to collapse
So far I was mostly trying various Stock ROMs and PMP Light Rom. Ok, I will try the Hungarian Baseband cm, if that promises better results. I will report back if that worked.
Toppar said:
So far I was mostly trying various Stock ROMs and PMP Light Rom. Ok, I will try the Hungarian Baseband cm, if that promises better results. I will report back if that worked.
Click to expand...
Click to collapse
CM11 gives good performance than stock rom for sure.
Hey, I managed to override the baseband with the Hungarian one through the zip from here: [CM11][GT-S7562] Samsung Galaxy S Duos Kitkat 4.4.4
The problems are still the same. I tried to install the cm11 from the same thread (through TWRP), but I get an error (Updater process ended with ERROR: 7) telling me that I am trying to install on top of incompatible data. I tried doing a factory reset, but to no avail.
Right now I am on |DisContinued| COSMIC ROM | Version 2.5 |KitKat-Mod|Galaxy S Dous|Smooth|Fast|Stylish, which also is based on cm11.
I will try to flash some other ROM from PC, but I don't have much hope that will solve anything. Does anyone know where I could obtain a Stock ROM, that is compatible with Hungarian Baseband? There is a link in the Kitkat Thread above (http://d-h.st/do72), but it only gives me some exe-file instead of the tar.gz that I look for...
Toppar said:
Hey, I managed to override the baseband with the Hungarian one through the zip from here: [CM11][GT-S7562] Samsung Galaxy S Duos Kitkat 4.4.4
The problems are still the same. I tried to install the cm11 from the same thread (through TWRP), but I get an error (Updater process ended with ERROR: 7) telling me that I am trying to install on top of incompatible data. I tried doing a factory reset, but to no avail.
Right now I am on |DisContinued| COSMIC ROM | Version 2.5 |KitKat-Mod|Galaxy S Dous|Smooth|Fast|Stylish, which also is based on cm11.
I will try to flash some other ROM from PC, but I don't have much hope that will solve anything. Does anyone know where I could obtain a Stock ROM, that is compatible with Hungarian Baseband? There is a link in the Kitkat Thread above (http://d-h.st/do72), but it only gives me some exe-file instead of the tar.gz that I look for...
Click to expand...
Click to collapse
I don't think cosmic is based on cm11 its just kitkat themed stock.
Try to again download cm11, u will find a new experimental build on last pages.
U can find the stock firmware from this thread.
https://forum.xda-developers.com/s7562/general/cwm-twrp-recoveries-s7562-t3352052
Ritik99 said:
Try to again download cm11, u will find a new experimental build on last pages.
Click to expand...
Click to collapse
I tried already both, the ROM in the first post and the latest experimental one from one of the last pages. They all gave me Error: 7
Ritik99 said:
U can find the stock firmware from this thread.
https://forum.xda-developers.com/s7562/general/cwm-twrp-recoveries-s7562-t3352052
Click to expand...
Click to collapse
Its hosted at http://d-h.st... The only thing I can manage to get from there is a 7z1602.exe, which seems like a bad idea to execute. Can you download from there? If yes, maybe you could then upload it to a different file hoster, I would be very grateful.
Yes i tried to download stock Hungarian firmware from cm11 thread, it isn't working.
i reported it their.
Have you tried to download from here, download your country firmware - https://www.sammobile.com/firmwares/database/GT-S7562/
You will have to flash with odin , their are many good guides available for that on Google
Ritik99 said:
Yes i tried to download stock Hungarian firmware from cm11 thread, it isn't working.
i reported it their.
Have you tried to download from here, download your country firmware - https://www.sammobile.com/firmwares/database/GT-S7562/
You will have to flash with odin , their are many good guides available for that on Google
Click to expand...
Click to collapse
I know that site, but they don't have the version for Hungarian Baseband. I tried some other stock roms from there though, but no success.
Toppar said:
I know that site, but they don't have the version for Hungarian Baseband. I tried some other stock roms from there though, but no success.
Click to expand...
Click to collapse
They provide flash file which can be used with odin through computer. It will install stock samsung firmware of your country, so it will make the whole phone new, don't forget to backup your data.
Ritik99 said:
They provide flash file which can be used with odin through computer. It will install stock samsung firmware of your country, so it will make the whole phone new, don't forget to backup your data.
Click to expand...
Click to collapse
I started this Thread because that messed up my mobile network connection, so it is not "new". I need some firmware, that will work with my (now) Hungarian Baseband.
Toppar said:
I started this Thread because that messed up my mobile network connection, so it is not "new". I need some firmware, that will work with my (now) Hungarian Baseband.
Click to expand...
Click to collapse
You say that you cant flash basebands through recovery, so now the best option is odin only, now i am out of ideas about for your problem
I was able to flash the hungarian baseband only, no other worked. Now I do need some ROM that works with that Baseband. I posted a request for a new link in the Thread, maybe I then can proceed and make some progress.
Just if anyone is still following this, I have managed to restore the network connection by using the Hungarian Stock ROM, which I finally managed to locate. If anyone needs it too, here is a link:
http://www.filehosting.at/file/details/656731/S7562XXALJ4_S7562OXXALJ3_S7562XXLJ3_HOME.tar.md5