Database Info

[Q] [Urgent Help] File Transfer under Recovery

I have Format everything under Recovery CWM 6.0.3.1
Include Format system.
Now I can't get reboot into normal status and stay in Galaxy Note logo.
May I know how can I transfer to SD and flash new ROM?

lucifer85 said:
I have Format everything under Recovery CWM 6.0.3.1
Include Format system.
Now I can't get reboot into normal status and stay in Galaxy Note logo.
May I know how can I transfer to SD and flash new ROM?
Click to expand...
Click to collapse
If you formatted system there is no os to boot into... You need the zip file on the sd card before doing anything like that and you also must check that the recovery you are using can read that sd card otherwise its back to pc Odin for you to re-install an OS, reroot and install a recovery...

(Q) Samsung galaxy s4 Installation Aborted

hi guys.
i need help.
im very noob/new in android thing.
right now im stuck on installing CM10.2 on my galaxy s4.
here is my condition.
-galaxy s4 GTi9500
-vers 4.3
-rooted
-CWM v6.0.3.2
-have done backup on CWM both sdcard and external sd
-wanna install cm-10.2.0-jfltexx ( i dont know whether it is right)
-wiped data/factory reset , cache, dalvik cache.
- cant restore from bot sd card / external sd . On sd card it stated MD5 mismatch. on external sd cant restore /data.
- I put my ZIP file on external sd.
-When i wanna install zip. it stated Assert failed : getprop (ro.product.device)=jftleatt Status 7 Installation aborted.
-now i also cant boot my phone. STUCK on Samsung logo.
Help me guys. im frustated

snoir said:
hi guys.
i need help.
im very noob/new in android thing.
right now im stuck on installing CM10.2 on my galaxy s4.
here is my condition.
-galaxy s4 GTi9500
-vers 4.3
-rooted
-CWM v6.0.3.2
-have done backup on CWM both sdcard and external sd
-wanna install cm-10.2.0-jfltexx ( i dont know whether it is right)
-wiped data/factory reset , cache, dalvik cache.
- cant restore from bot sd card / external sd . On sd card it stated MD5 mismatch. on external sd cant restore /data.
- I put my ZIP file on external sd.
-When i wanna install zip. it stated Assert failed : getprop (ro.product.device)=jftleatt Status 7 Installation aborted.
-now i also cant boot my phone. STUCK on Samsung logo.
Help me guys. im frustated
Click to expand...
Click to collapse
try odin method of flashing
download to your PC the latest driver of samsung for your galaxy 4
regards:good:

snoir said:
hi guys.
i need help.
im very noob/new in android thing.
right now im stuck on installing CM10.2 on my galaxy s4.
here is my condition.
-galaxy s4 GTi9500
-vers 4.3
-rooted
-CWM v6.0.3.2
-have done backup on CWM both sdcard and external sd
-wanna install cm-10.2.0-jfltexx ( i dont know whether it is right)
-wiped data/factory reset , cache, dalvik cache.
- cant restore from bot sd card / external sd . On sd card it stated MD5 mismatch. on external sd cant restore /data.
- I put my ZIP file on external sd.
-When i wanna install zip. it stated Assert failed : getprop (ro.product.device)=jftleatt Status 7 Installation aborted.
-now i also cant boot my phone. STUCK on Samsung logo.
Help me guys. im frustated
Click to expand...
Click to collapse
hey dont install that. Cm10.2.0-jfltexx support onlygalaxy s4 i9505 LTE version only.But you have i9500 galaxy s4 it does not support Cm10.2.0-jfltexx , othervice you stuck on flasing

Stuck at htc logo

I was on Cm9.1 . Then I installed cm11 RC1. I did the following steps 1.Format data/factory restet 2.wipe cache partition 3.wipe delvik cache 3.intall zip from sd card and install package. Then reboot but i stuck at htc logo. I did it for 3 -4 times but nothing changed.Then i tried to revert back to my privious rom with the same process but the problem exist. I cann't boot my phone..
reply soon

Rihhan said:
I was on Cm9.1 . Then I installed cm11 RC1. I did the following steps 1.Format data/factory restet 2.wipe cache partition 3.wipe delvik cache 3.intall zip from sd card and install package. Then reboot but i stuck at htc logo. I did it for 3 -4 times but nothing changed.Then i tried to revert back to my privious rom with the same process but the problem exist. I cann't boot my phone..
reply soon
Click to expand...
Click to collapse
your stuck in boot loop .. possible reasons is 1. the no of partitions on ur SD card[it was the issue with me atleast]. i dont know how u have partitioned your card but ideally format your card create a ext4 partition of around 1gb keep the rest a fat32. copy the rom and gapps provided in ur fat32 partition. reboot into recovery , wipe dalvik cache n factory settings n install the rom n reboot . hopefully it should work.
another source of problems is your recovery . if problems persist update your recovery to the latest version TWRP 2.6.3 is good enough n then try again.
hope it helps

YedaAnna said:
your stuck in boot loop .. possible reasons is 1. the no of partitions on ur SD card[it was the issue with me atleast]. i dont know how u have partitioned your card but ideally format your card create a ext4 partition of around 1gb keep the rest a fat32. copy the rom and gapps provided in ur fat32 partition. reboot into recovery , wipe dalvik cache n factory settings n install the rom n reboot . hopefully it should work.
another source of problems is your recovery . if problems persist update your recovery to the latest version TWRP 2.6.3 is good enough n then try again.
hope it helps
Click to expand...
Click to collapse
thanks:good:,, I have not formatted my sd card. So this is the reason i am unable to do booting cm 11..So there is no way to install cm11 without fomating sd card? any way i have managed to install cm9.1 .And it booted successfully.

Rihhan said:
thanks:good:,, I have not formatted my sd card. So this is the reason i am unable to do booting cm 11..So there is no way to install cm11 without fomating sd card? any way i have managed to install cm9.1 .And it booted successfully.
Click to expand...
Click to collapse
the problem was that your partition was not being detected properly due to which it was stuck.. the way you installed cm 9 you can install cm 11..
plus as you created only one partition and new table was made your recovery was able to detect it..:good:

can i install cm 11 without making any partition in my sd card. if so then explain it please. I want to install it on my pico but i have 4GB class4 sd card.

Rihhan said:
can i install cm 11 without making any partition in my sd card. if so then explain it please. I want to install it on my pico but i have 4GB class4 sd card.
Click to expand...
Click to collapse
Yup buddy you can.. I think you are going to install RC1..
Just flash the ROM.. Let it boot..
Setup your phone.. Then flash the gapps .. There you go u have installed Cm11.. :sly:
via Apache Helicopter

shubhojit89 said:
Yup buddy you can.. I think you are going to install RC1..
Just flash the ROM.. Let it boot..
Setup your phone.. Then flash the gapps .. There you go u have installed Cm11.. :sly:
via Apache Helicopter
Click to expand...
Click to collapse
I have flashed the rom . But can not boot. stuck at htc logo as i said.

Rihhan said:
I have flashed the rom . But can not boot. stuck at htc logo as i said.
Click to expand...
Click to collapse
Do all that cleaning and all..
Go to mounts and storage format everything except your SD card .. Flash the ROM..
If you have multiple ext partition delete the partitions or keep only one partition.. First boot takes time so don't worry..
via Apache Helicopter

[Q] Cant mount SDcard in CWM recovery

Hi! i have a motorola defy MB525 , and its running Eclair 2.1, so i wanted to flash CM11 , i did everything successfully until the part where you have to flash your ROM ! good thing im cautious and always check the zip. install before wiping any data, and i got the following message when trying to install zip. from sdcard :
E:can't mount /sdcard
because i haven't wiped my data yet, the phone is now working 100%, but i want kitkat not eclair,so can anyone help ??
my clockworkmod version is 2.5.1.8
NOTE: i googled this and found out that sometimes CWM can only read FAT32 file system , but my sdcard is already formatted to FAT32 file system, and if it makes any difference i did format it again to the same file system FAT32 , but i still get the same error!
I REALLY WANT CM11 BECAUSE MY CURRENT ROM IS VERY BAD AND OUTDATED! SO PLEASE HELP!!
Thx

Did anybody found the answer yet?
Im still stuck at the same problem....any help??

Try Flashing The CWM Recovery Again.......
sazzam10 said:
Hi! i have a motorola defy MB525 , and its running Eclair 2.1, so i wanted to flash CM11 , i did everything successfully until the part where you have to flash your ROM ! good thing im cautious and always check the zip. install before wiping any data, and i got the following message when trying to install zip. from sdcard :
E:can't mount /sdcard
because i haven't wiped my data yet, the phone is now working 100%, but i want kitkat not eclair,so can anyone help ??
my clockworkmod version is 2.5.1.8
NOTE: i googled this and found out that sometimes CWM can only read FAT32 file system , but my sdcard is already formatted to FAT32 file system, and if it makes any difference i did format it again to the same file system FAT32 , but i still get the same error!
I REALLY WANT CM11 BECAUSE MY CURRENT ROM IS VERY BAD AND OUTDATED! SO PLEASE HELP!!
Thx
Click to expand...
Click to collapse
i think Your CWM REcovery got corrupted.........
try reflashing the recovery and Try Again.....
say Thanks If this helped You

sazzam10 said:
Hi! i have a motorola defy MB525 , and its running Eclair 2.1, so i wanted to flash CM11 , i did everything successfully until the part where you have to flash your ROM ! good thing im cautious and always check the zip. install before wiping any data, and i got the following message when trying to install zip. from sdcard :
E:can't mount /sdcard
because i haven't wiped my data yet, the phone is now working 100%, but i want kitkat not eclair,so can anyone help ??
my clockworkmod version is 2.5.1.8
NOTE: i googled this and found out that sometimes CWM can only read FAT32 file system , but my sdcard is already formatted to FAT32 file system, and if it makes any difference i did format it again to the same file system FAT32 , but i still get the same error!
I REALLY WANT CM11 BECAUSE MY CURRENT ROM IS VERY BAD AND OUTDATED! SO PLEASE HELP!!
Thx
Click to expand...
Click to collapse
Any luck with that?

problem-Twrp didn't show sdcard (internal storage)

Hi
After i install twrp v3.2.1-1 (herolte) on my galaxy s7 (sm-G930F) then i boot to twrp and ask me to swipe (right to allow modification)
And i swipe, after that i click the install button and then.. There is no sdcard (internal storage) it shows sdcard 0 mb while the external card shows normally but when i flash anything the twrp told me in red font (can't mount data) even i try to format but even that it says the same thing.
Please help me to to install the twrp recovery on my device correctly.
Note that I'm on android nougat 7.0
Thanks in advance.

Your device is still encrypted.
In TWRP go to wipe>format data that will delete the encryption.(But it will also delete ALL DATA.)
Then restart and swipe right to allow modification.
After that you should be good to go.