After flashing Atomods Sucessfully i tried to enable CRT animation ( Mentioned in note that : have to edit the Built.prop to enable animation) as follow
Add # before the line <debug.sf.hw=1>
Like this < #debug.sf.hw=1 >
After doing this CRT animation works fine but i cant able to see my bootanimation only it sounds..
Any ideas/helps..
Sry fr my BAd englisH
amtra said:
After flashing Atomods Sucessfully i tried to enable CRT animation ( Mentioned in note that : have to edit the Built.prop to enable animation) as follow
Add # before the line <debug.sf.hw=1>
Like this < #debug.sf.hw=1 >
After doing this CRT animation works fine but i cant able to see my bootanimation only it sounds..
Any ideas/helps..
Sry fr my BAd englisH
Click to expand...
Click to collapse
This line forces GPU to render graphics. In the early gingerbread roms, debug.sf.hw=1 is the source of a pain for all users, slowing ALL popup animations and lagging them badly, and also rendering the screenoff animation inexistent.
The solution is deleting that line or put a # behind, so its not being read by the system.So, doing that has this problem but your system will work much smoother.
This is just my opinion!
ShadowsDie said:
This line forces GPU to render graphics. In the early gingerbread roms, debug.sf.hw=1 is the source of a pain for all users, slowing ALL popup animations and lagging them badly, and also rendering the screenoff animation inexistent.
The solution is deleting that line or put a # behind, so its not being read by the system.So, doing that has this problem but your system will work much smoother.
This is just my opinion!
Click to expand...
Click to collapse
Thanks for your Opinion So i have to sacrifice any one of them..
amtra said:
Thanks for your Opinion So i have to sacrifice any one of them..
Click to expand...
Click to collapse
You are welcome, wait a second opinion or direct answer but from my experience here i knew this is the reason.
ShadowsDie said:
You are welcome, wait a second opinion or direct answer but from my experience here i knew this is the reason.
Click to expand...
Click to collapse
I jus take it as a opinion and disabled debug.sw.hw=1 coz there's no use of bootanimation for me..
Thanks again..
ShadowsDie said:
This line forces GPU to render graphics. In the early gingerbread roms, debug.sf.hw=1 is the source of a pain for all users, slowing ALL popup animations and lagging them badly, and also rendering the screenoff animation inexistent.
The solution is deleting that line or put a # behind, so its not being read by the system.So, doing that has this problem but your system will work much smoother.
This is just my opinion!
Click to expand...
Click to collapse
So when my system works smoother debug.sf.hw=1 Enabled or Disabled
amtra said:
So when my system works smoother debug.sf.hw=1 Enabled or Disabled
Click to expand...
Click to collapse
well its a tweak, you can add 16 bit transparency as well and as i said that tweak is the same thing as this
debug.sf.hw=1
debug.composition.type=gpu
if you add both the system should run smoother but i guess its not battery friendly
also if you want ultimate smoothness but a less battery life you can add this in build.prop
debug.sf.hw=1
debug.composition.type=gpu
debug.composition.type=cpu
this will force both gpu and cpu to work the graphics
i gave it a try and added the 16bit transparency and well it really works better
so yea, enable all these
ShadowsDie said:
well its a tweak, you can add 16 bit transparency as well and as i said that tweak is the same thing as this
debug.sf.hw=1
debug.composition.type=gpu
if you add both the system should run smoother but i guess its not battery friendly
also if you want ultimate smoothness but a less battery life you can add this in build.prop
debug.sf.hw=1
debug.composition.type=gpu
debug.composition.type=cpu
this will force both gpu and cpu to work the graphics
i gave it a try and added the 16bit transparency and well it really works better
so yea, enable all these
Click to expand...
Click to collapse
Wooa..
Sounds good wen looking for performance but already my SGAP hunts my battery bit high so i will try it for some time..
ShadowsDie said:
well its a tweak, you can add 16 bit transparency as well and as i said that tweak is the same thing as this
debug.sf.hw=1
debug.composition.type=gpu
if you add both the system should run smoother but i guess its not battery friendly
also if you want ultimate smoothness but a less battery life you can add this in build.prop
debug.sf.hw=1
debug.composition.type=gpu
debug.composition.type=cpu
this will force both gpu and cpu to work the graphics
i gave it a try and added the 16bit transparency and well it really works better
so yea, enable all these
Click to expand...
Click to collapse
So i cant conclude to stick to a rom.. Now still on stock..?
amtra said:
So i cant conclude to stick to a rom.. Now still on stock..?
Click to expand...
Click to collapse
if you are asking me if im on stock, no. im now on inspiration as it has no bugs.
you should stay on any gb rom for now as the most of jb roms have a lot of bugs.
the only i like is techkang's cm + kernel 3 but it has the usb charging bug and that is the way i charge my phone nowadays
ShadowsDie said:
if you are asking me if im on stock, no. im now on inspiration as it has no bugs.
you should stay on any gb rom for now as the most of jb roms have a lot of bugs.
the only i like is techkang's cm + kernel 3 but it has the usb charging bug and that is the way i charge my phone nowadays
Click to expand...
Click to collapse
Ya i also tried CM10.2 all r working fine Except USB charging.. Lets try Inspiration..
Related
Hey.!
Titanium Tweaker is a CPU optimizing application which helps you boost up your Phone's CPU and make it faster.
The application tweaks the kernel, as the name suggest, such as to change the Scaling Frequency, Governors and Schedulers.
Also this app is universal so will work on all ROMs and Phones which support the features!
Fellow Developers! Feel free to add this app to your release's ramdisk
Previous Users of this app must have noticed that this app is updated after ages Actually i did not update it,
I completely rebuild it from scratch ! with a better heirarchy , sleeky UI, a fast Interface, and sexier tweaking
So you may miss features like Prop Editor, Turbo Charger, Customized toggles, etc
These features will be added in the next few releases after which i will work on better tweaks :laugh:
Current Features of this application :-
* Cpu Frequency Optimization
* Governor Selection
* Choice of Available Scheulers
many old and new features coming back
Titanium Kernel Users :- There will be updates on kernel specific parts too like voltage and other scripts Stay tuned for it.. You can get the voltage working version from Aditya's SL kernel Thread till then
The application works right from froyo upto JellyBean (4.2)
Note :- ROOTED USERS ONLY !!! no, i was'nt shouting,, its so that it comes to you attention
Supporting all SU binaries and works with all kernels and roms.. If you are on stock, it will not work..
DOWNLOAD :- https://play.google.com/store/apps/details?id=com.adipat.root
Credits :-
Aditya Patange (adi_pat) - could'nt have dont it without you
Ajay Kawte (speed_bot) - appreciation
Others - testers etc..
Channel Logs :-
Channel Log :-
Click to expand...
Click to collapse
Version 1.1.0
Version Code 1 :-
Click to expand...
Click to collapse
*Changer Clock Freq
*Change Clock Governor
*Set Swappiness
*Change lcd_density
*Voltage(kernel specific)(coming)
*IO Schedulers
*Lots of kernel Toggles
*Customized menu for toggle functions
*Turbo-Charger
Click to expand...
Click to collapse
Version 1.1.1
Version Code 2 :-
Click to expand...
Click to collapse
*ICS UI
*JB Support
*Removed Button Noise
*Sleekified(my own word) the app.
*SU permisson bug fixed
*minor changes
Click to expand...
Click to collapse
Version 1.1.2
Version Code 3 :-
Click to expand...
Click to collapse
*Cynogen Kernel Bug Fixed [MAJOR]
*Added better Exception catches
*AbsentFileBug Fixed
*Working on Sharper Icon (thanks to aarush.bhutani)
Click to expand...
Click to collapse
Version 1.1.3
Version Code 4 :-
Click to expand...
Click to collapse
*Added Prop Editor [MAJOR]
*Sleeked the App more
*Working on Sharper Icon (thanks to aarush.bhutani)
Click to expand...
Click to collapse
Version 1.1.4
Version Code 5 :-
Click to expand...
Click to collapse
*Made some usefull changes in Prop Editor
*Removed That 'NoFreq' and stuff! (Hell Yeah)
*Added Game tweak support in Prop Editor
Click to expand...
Click to collapse
Version 1.2.0
Version Code 7 :-
Click to expand...
Click to collapse
*Rebuilt From Scratch!
*Faster,Better,Sleeker
*New UI, with swipes and spinners!
Click to expand...
Click to collapse
Version 1.2.1
Version Code 8 :-
Click to expand...
Click to collapse
*Hardware Acceleration
*Reduced Trash Code
*Set On Boot Option
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Stay tuned for more Updates
Screenshots !
Titanium Tweaker
Screenshots :- attatchments
Downloading now. Gonna give this a whirl on ICS/sense 3.6 on evo 3d
Sent from my PG86100 using xda premium
SketchyStunts said:
Downloading now. Gonna give this a whirl on ICS/sense 3.6 on evo 3d
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
cool,, try it out and tell me in case of any bugs, please rate it on playstore, comment too if possible
Keep it up
Aarush said:
Keep it up
Click to expand...
Click to collapse
Thanks,
Tested uninstalled lagged my phone down like crazy sticc to v6
♚SGΣ4G V6'D G+ΩΠΣ♚
™SωΔGG GΔΠGG©
dswaggz said:
Tested uninstalled lagged my phone down like crazy sticc to v6
♚SGΣ4G V6'D G+ΩΠΣ♚
™SωΔGG GΔΠGG©
Click to expand...
Click to collapse
Please let me tell u, this is not v6 script,, as that rearranges priorities, specially the launcher, this app is a multi purpose tweaker, My turbo Charger just adjusts settings of the LMK values and provides differant options!
THIS IS NOT THE SCRIPT, JUST A PART OF IT && it does not lag on any other phone, not e1 galaxy y, i have tested it my self, it freezes just for 2 seconds ONLY ON THE FIRST USE, as it has to gather all SU permissions at once, Thats it.. its fluent after that
Use it for the toggles it has, for the admin functions it allows u, the customization it allows u, and lots more!
Maybe u should conversate w/ zepp then
♚SGΣ4G V6'D G+ΩΠΣ♚
™SωΔGG GΔΠGG©
dswaggz said:
Maybe u should conversate w/ zepp then
♚SGΣ4G V6'D G+ΩΠΣ♚
™SωΔGG GΔΠGG©
Click to expand...
Click to collapse
yeah i did, speak to him..
Thanks
Hi
Since I use Titanium kernel with UV I can help to test this
as soon as you have anything to test
Just some things I noticed:
Most are more "cosmetic"
-filter out freq that are not "possible"
Nicer then to show "NoFreq"
-same for goveners and IO Sched
Regards
max
maxwen said:
Hi
Since I use Titanium kernel with UV I can help to test this
as soon as you have anything to test
Just some things I noticed:
Most are more "cosmetic"
-filter out freq that are not "possible"
Nicer then to show "NoFreq"
-same for goveners and IO Sched
Regards
max
Click to expand...
Click to collapse
Thanks for ur feed back, please elaborate, what do u mean by 'cosmetic'
And for the NoFreq Part, I removed it
Hi
s4shyam95 said:
Thanks for ur feed back, please elaborate, what do u mean by 'cosmetic'
And for the NoFreq Part, I removed it
Click to expand...
Click to collapse
Thanks. I would "rate" such a thing as "cosmetic"
Since it does not influence the functionality.
First of all "safe functionality" is most important to me
for such an app.
But the "eye candy" factor may influence more how
"popular" the app will become. Human brain tends to be
attracted more by "visual" things
Regards
max
maxwen said:
Hi
Thanks. I would "rate" such a thing as "cosmetic"
Since it does not influence the functionality.
First of all "safe functionality" is most important to me
for such an app.
But the "eye candy" factor may influence more how
"popular" the app will become. Human brain tends to be
attracted more by "visual" things
Regards
max
Click to expand...
Click to collapse
Ok, lemme tell u 2 things
1) This app is completely safe, no chances of bricking or getting in a bootloop
and
2) This app is completely functional, not just a cosmetic , as u said..
It does have various functions that devlopers and advance users find useful,
Please tell me that why do u think that this app does not influence functionality ?
Thank You
nice work make my lg p350 laggfree keep it up
s4shyam95 said:
Ok, lemme tell u 2 things
1) This app is completely safe, no chances of bricking or getting in a bootloop
and
2) This app is completely functional, not just a cosmetic , as u said..
It does have various functions that devlopers and advance users find useful,
Please tell me that why do u think that this app does not influence functionality ?
Thank You
Click to expand...
Click to collapse
I think you misunderstood what he was saying. When saying 'most are cosmetic', it means that most of his issues aren't with the actual functionality of the app, more with the look/feel of it. Things like hiding invalid options instead of basically making them unselectable are 'cosmetic'.
Btw, im playing around with your app. Ill post some feedback afterwards.
Sent from my HTC One X using Tapatalk 2
kravguy said:
I think you misunderstood what he was saying. When saying 'most are cosmetic', it means that most of his issues aren't with the actual functionality of the app, more with the look/feel of it. Things like hiding invalid options instead of basically making them unselectable are 'cosmetic'.
Btw, im playing around with your app. Ill post some feedback afterwards.
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
Oh, thanks a lot i mis understood it, and neways i removed the unwanted radio buttons from the list, please tell me if any more improvement is possible, ill thank u for the abv post, for clearing my misunderstanding
saif kazi said:
nice work make my lg p350 laggfree keep it up
Click to expand...
Click to collapse
Thanks, stay tuned with the app, to enjoy updates with more n more features
There are time when people get screen flicker problems when flashing a new ROM. This either has to do with the ROM itself, for the kernel. Until full support is givien, I have a temporary fix. This fix is basically disabling HW overlay, but disabling HW overlay in the settings does not stick on reboot and this has been really annoying.
For those who want to know what Disabling HW overlay is, it is basically making the phone's gpu render the graphics instead of the cpu. This allows for better graphical rendering of everything. This is not a proven statement, but theoretically, disabling HW overlay, may increase battery consumption... not by much though.
Finally, I am not responsible for anything that goes wrong with your phone when using my method. Please don't whine that it did not work or I messed your phone up. You are doing this at your own risk!!
My fix
Step 1 - Download a build.prop editor app from the play store (I recommend JRummy's one) and run the app. MAKE A BACKUP OF ORIGINAL build.prop!!
Step 2 - Locate these four lines
a) debug.mdpcomp.maxlayer
b) debug.composition.type
c) dev.pm.dyn_samplingrate or dev.pm.cpu_samplingrate (you may not find these values; however, if you do, change the "dyn" or "cpu" to gpu) --> dev.pm.gpu_samplingrate
**If you cannot find this value add "dev.pm.gpu_samplingrate"
d) debug.sf.hw
e) debug.egl.hw
Step 3 - Edit the values of each one
a) debug.mdpcomp.maxlayer = 0 or 1 or 2 --> READ EDIT BELOW
EDIT* --> This value can be either 0 or 1 or 2. I put mine on 0 right now and I feel like I'm getting better performance. Before, I put it at 1 or 2; so, you can try it with 2 first.
b) debug.composition.type = gpu
c) dev.pm.gpu_samplingrate = 1
d) debug.sf.hw = 1
e) debug.egl.hw = 1
f ) If you are running CM10, go to setting --> performance --> surface improvement --> disable dithering (AOKP has no option for this)
Make sure to save after each edit. The saved edit will not appear changed until you reboot your device.
After rebooting, make sure to see the changed values.
Thanks to everyone who has given me info of their device. Thanks to davietr for his input on including the "dev.pm.gpu_samplingrate" value
If this helped and work, Thanks would be appreciated.
EDIT **If it's not too much of a hassle and my fix methods worked for you, please post what ROM/Kernel you are using on this page to help others!!**
Can't thank posts yet, so I'll thank you this way, Thanks! This worked for me!
Sazex said:
Can't thank posts yet, so I'll thank you this way, Thanks! This worked for me!
Click to expand...
Click to collapse
Great! I hope it can work for other people on different cm10 mods! What ROM/Kernel are you on?
Running AOKP 21st build. No flicker with stock kernel. Had flicker using instigatorx kernel. Installed Instigatorx 6.3.6 changed build.prop setting to the ones you provided (maxlayer set to "1"). No more flicker. Great work and thank you.
davietr said:
Running AOKP 21st build. No flicker with stock kernel. Had flicker using instigatorx kernel. Installed Instigatorx 6.3.6 changed build.prop setting to the ones you provided (maxlayer set to "1"). No more flicker. Great work and thank you.
Click to expand...
Click to collapse
That's great! I'm glad this method is working with the other Instigator's Kernel. Where did you get the 21st build from? I know R4INS left Skyrocket and his AOKP build for the skyrocket stopped at 9th. I loved the stability of the rom, but I had to leave it for Vincom's CM10 because of the call volume of the AOKP rom was so low.
jee'sgalaxy said:
That's great! I'm glad this method is working with the other Instigator's Kernel. Where did you get the 21st build from? I know R4INS left Skyrocket and his AOKP build for the skyrocket stopped at 9th. I loved the stability of the rom, but I had to leave it for Vincom's CM10 because of the call volume of the AOKP rom was so low.
Click to expand...
Click to collapse
http://rootzwiki.com/topic/34092-aokp-unofficial-galaxy-s-ii-skyrocket-i727-sept-21-jb-build-2/. I have no problem with in call volume on this build.
jee'sgalaxy said:
Great! I hope it can work for other people on different cm10 mods! What ROM/Kernel are you on?
Click to expand...
Click to collapse
I'm on vincom's superlite v4 with the 6.3.6 instigator kernel
I'm using sean's method for my phone (vincom v4 and X 6.3.4) and it works great too, anyone can explain what is different?
Sean's method: - debug.mdpcomp.maxlayer = 0
- disable dithering in performance setting
View attachment 1360158All I did was edit the line "debug.mdpcomp.maxlayer=2" to read "debug.mdpcomp.maxlayer=1". Thank you. This got rid of the flicker I was seeing in Poweramp. Here's a shot of what I am running.
Hello,
I have done some testing that I think you might find some of my results interesting.
I applied your build.prop setting and they did get rid of the home screen and gallery flicker problems for me. But, I was still seeing stuttering while playing videos and those problems were amplified playing a video while connected to tv with mhl/hdmi. Which of course this bothered me.
It make me think of the build.prop. Then I remembered something.
A change was made to: debug.composition.type...from dyn to cpu or gpu.
if you look a little further down in the build.prop list you will find an entry for "dev.pm.dyn_samplingrate" with value set to "1"
So, when the debug.composition.type was "dyn" it had a sampling rate. But when the debug.composition.type is changed to "cpu" or "gpu" it isn't assigned a sampling rate.
Needless to say I decided to give them a sampling rate. I added and used both "dev.pm.cpu_samplingrate" and "dev.pm.gpu_samplingrate" with values of "1" and "2" for each.
Results. Video playback is stutter free on device and when plugged into tv thru mhl/hdmi the stutter and flicker where completely gone. Also, I swear the graphic speed is lightning fast and apps open faster. I really do believe it has improved the over all graphics speed on the device. Test for yourself and see what you think.
My best result were
debug.composition.type=gpu
debug.egl.hw=1
debug.mdpcomp.maxlayer=0
debug.sf.hw=1
add
"dev.pm.gpu_samplingrate=1"
Edit: forgot to mention. I am running R4INS AOKP Sept 26Th build with stock kernel. No performance changes. No ability to disable dithering.
davietr said:
Hello,
I have done some testing that I think you might find some of my results interesting.
I applied your build.prop setting and they did get rid of the home screen and gallery flicker problems for me. But, I was still seeing stuttering while playing videos and those problems were amplified playing a video while connected to tv with mhl/hdmi. Which of course this bothered me.
It make me think of the build.prop. Then I remembered something.
A change was made to: debug.composition.type...from dyn to cpu or gpu.
if you look a little further down in the build.prop list you will find an entry for "dev.pm.dyn_samplingrate" with value set to "1"
So, when the debug.composition.type was "dyn" it had a sampling rate. But when the debug.composition.type is changed to "cpu" or "gpu" it isn't assigned a sampling rate.
Needless to say I decided to give them a sampling rate. I added and used both "dev.pm.cpu_samplingrate" and "dev.pm.gpu_samplingrate" with values of "1" and "2" for each.
Results. Video playback is stutter free on device and when plugged into tv thru mhl/hdmi the stutter and flicker where completely gone. Also, I swear the graphic speed is lightning fast and apps open faster. I really do believe it has improved the over all graphics speed on the device. Test for yourself and see what you think.
My best result were
debug.composition.type=gpu
debug.egl.hw=1
debug.mdpcomp.maxlayer=0
debug.sf.hw=1
add
"dev.pm.gpu_samplingrate=1"
Edit: forgot to mention. I am running R4INS AOKP Sept 26Th build with stock kernel. No performance changes. No ability to disable dithering.
Click to expand...
Click to collapse
Hey Thanks a lot for the info! I add that on!
Worked like a champ on ParanoidAndroid 2.+ with the InstigaterX 6.3.6 Kernel.
Is it possible to make this into a flashable zip please!
Sent from my SGH-T989 using xda premium
This is great, thanks!
LoopDoGG79 said:
Is it possible to make this into a flashable zip please!
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Hey, I was thinking about doing this, but I only have one phone and i dont want to change ANYTHING!!! right now because it's perfect for me. However, the problem with flashing a build.prop is that the build.prop for AOKP, Paranoid Android, and CM10 are all different based on who built it. This means I would have to make a flashable build.prop for all three ROMs. In addition, build.prop also includes information from build number to build date, to what ringtones you are using. So instead of risking errors, I decided that it was best to edit it through the app.
If you have any ideas or brainstorm, definitely message me! :good::good::good:
Hey man thank you so much, the flickering was getting so annoying. I read somewhere that they were not getting SOD or RR with this kernel but when it started flickering I was disoriented but not anymore, thanks to you.
I have T-Mo SGS2 using CM10 Erickwill's rom 10/04 with instigatorx Kernel.
Thanks! Quick 5 seconds to fix!
Sent from my SAMSUNG-SGH-T989 using xda premium
rcanela1 said:
Hey man thank you so much, the flickering was getting so annoying. I read somewhere that they were not getting SOD or RR with this kernel but when it started flickering I was disoriented but not anymore, thanks to you.
I have T-Mo SGS2 using CM10 Erickwill's rom 10/04 with instigatorx Kernel.
Click to expand...
Click to collapse
This is great information that it works on T-Mobile GS2!
I should've known to just check the build.prop, but props to you for figuring out what works... pun intended
If i remember correctly Topprospect the official CM10 maintainer mentioned that this is NOT a fix.....its just the same as disabling HW overlays in the settings.
Sent from my SGH-I727 using xda app-developers app
i want to disable hardware overlay and i'm on my micromax a110 stock ics rom 4.0.4. but the disable hardware overlay option is missing under developer options. i want to use software called screencast thats why i need to enable this option.
Have you tried to add this code to build.prop?
debug.composition.type=gpu
Click to expand...
Click to collapse
For your reference, I use several codes like this in my phone :
debug.sf.hw=1
video.accelerate.hw=1
debug.egl.profiler=1
debug.performance.tuning=1
debug.egl.hw=1
debug.composition.type=gpu
Click to expand...
Click to collapse
But I don't know how do i know that it's works...
triwira said:
Have you tried to add this code to build.prop?
For your reference, I use several codes like this in my phone :
But I don't know how do i know that it's works...
Click to expand...
Click to collapse
thanks my ui performing smooth but screencast still recording black screen.
anyone please answer...
any alternate way to record screen video?
Jeet Chowdhury said:
any alternate way to record screen video?
Click to expand...
Click to collapse
I was interested in this too, and found this line:
system_init.startsurfaceflinger=0
which is written to settings when i tick the option. But it does nothing, 'disable hw overlays' was still off at reboot.
I got the answer that settings app passes the command directly to surfaceflinger, so setting stays only untill reboot because of that (seems it's intended behavior).
Now i don't know what command that is, but if i did, then i could make init.d script.
Now there is a plugin for tasker (smart settings) that has this option, but tasker is not free, and neither is this plugin. I am surely not gonna buy these 2 apps just for this one setting (tasker might come handy someday though).
So if someone finds out about command that needs to be passed to surfaceflinger bin, please post it.:good:
Rom deleted by mistake as i deleted my google account and lost my xda password too,
Sorry to all, kindly msg me if anybody want any help
Read second post for some awesome things to increase performance and reduce the lags
Some important fix ( only for people who face problems)
I was very sorry to everyone here as i was not here for a long time , i lost my xda password and deleted my gmail account associated with xda , just able to recover my xda account..
Am too sorry , and i am here for all of you need help,
For roms you can search on google there are many out there,if not ask me i will send you links , also i seen some improvement in device performance when we increase the min cpu frequency by using kernel adiutor app,
Best rom, RESURRECTION REMIX , CAN SEND THE LINK IF YOU WANT
Put the min cpu frequency to 747mhz
IO scheduler and change read ahead to 512kb for both internal and external storage
Virtual memory 520-750 mb swappiness to 60
Entropy - read = 512 write = 256
Set all this in kernel adiutor app using root access and tell me the results ,
Been waiting for this for so long. SO excited! Thanks bro.!
ROM Reviews
Okay, so I have downloaded and flashed the ROM. Here what I feel about this ROM.
Since not much has changed in the ROM, there are many things to be added and removed.
The PROS
Better Gaming Performance
Smooth operation of Apps
No heat problem
The CONS
Too many useless apps
Audio output is still poor
Camera quality isn't improved
THINGS TO BE ADDED IN THIS ROM
Make it easy to edit the shortcuts in notification panel
All running apps should be shown by tapping the LEFT button ONCE. (Not press and hold the middle button)
Improve the App Switching duration.
Option to change the color of notification light
Add Guest Mode feature
Rest is just awesome about this ROM. I hope Tejas will provide us with the update soon.
Thanks bro for all your work.
all removed
thank you very much waiting from long time thanks a lot
HELP In A DECISION
andro_adi said:
Okay, so I have downloaded and flashed the ROM. Here what I feel about this ROM.
Since not much has changed in the ROM, there are many things to be added and removed.
The PROS
Better Gaming Performance
Smooth operation of Apps
No heat problem
The CONS
Too many useless apps
Audio output is still poor
Camera quality isn't improved
THINGS TO BE ADDED IN THIS ROM
Make it easy to edit the shortcuts in notification panel
All running apps should be shown by tapping the LEFT button ONCE. (Not press and hold the middle button)
Improve the App Switching duration.
Option to change the color of notification light
Add Guest Mode feature
Rest is just awesome about this ROM. I hope Tejas will provide us with the update soon.
Thanks bro for all your work.
Click to expand...
Click to collapse
as IN THE NEW ROM THAT I AM COOKING
I SEEN THAT IF I DISABLE THE BOOT ANIMATION , WE GET MORE 120 MB RAM FREE IN PHONE
I THINK THIS IS DUE TO MEMORY LEAK BUG IN ANDROID 5.0.x ROMS
SO CHOOSE BETWEEN BOOT ANIMANTION OR 120 MB MORE RAM.
beingtejas said:
as IN THE NEW ROM THAT I AM COOKING
I SEEN THAT IF I DISABLE THE BOOT ANIMATION , WE GET MORE 120 MB RAM FREE IN PHONE
I THINK THIS IS DUE TO MEMORY LEAK BUG IN ANDROID 5.0.x ROMS
SO CHOOSE BETWEEN BOOT ANIMANTION OR 120 MB MORE RAM.
Click to expand...
Click to collapse
Obviously more RAM would be the choice. Plus, the boot animation is very lame so disable or put something nice instead. Waiting for the update! :good:
Only one, boot animation or more free ram, you not get boot animation,
andro_adi said:
Obviously more RAM would be the choice. Plus, the boot animation is very lame so disable or put something nice instead. Waiting for the update! :good:
Click to expand...
Click to collapse
I go for ram then boot animation, but I make a zip to enable boot animation too
beingtejas said:
I go for ram then boot animation, but I make a zip to enable boot animation too
Click to expand...
Click to collapse
Sure, bro. And when can we expect the ROM to come?
No update now, sorry.
andro_adi said:
sure, bro. And when can we expect the rom to come?
Click to expand...
Click to collapse
get it from somewhere else
running fine.................heat problem is gone ..ram mng. at its best thnxxxx for looking after juice 2...........cant wait for ur next rom .............
thnxxxxx for new rom.......downloading now will post reviews after use..........beingtejas =beingawsome
reviews
Well there r lots of improvements
Camera quality is much better than stock
Touch is very smooth
Sound = a+
Performance improved then 1st rom
N the best improvement is battery big thnxxx for that(guys don't change settings unless u know what ur doing)
All the settings are done perfectly ....n customized status bar superb ..........
THANKS BRO FOR UR HARD WORK .......KEEP IT UP
a big big thanks to you bro, and for your support
Rebellion007 said:
Well there r lots of improvements
Camera quality is much better than stock
Touch is very smooth
Sound = a+
Performance improved then 1st rom
N the best improvement is battery big thnxxx for that(guys don't change settings unless u know what ur doing)
All the settings are done perfectly ....n customized status bar superb ..........
THANKS BRO FOR UR HARD WORK .......KEEP IT UP
Click to expand...
Click to collapse
welcome , working on new rom , but may takes time....i cant really promise , but it will be 6.0 marshmallow
where is link, give me link please.
beingtejas said:
welcome , working on new rom , but may takes time....i cant really promise , but it will be 6.0 marshmallow
Click to expand...
Click to collapse
wow........waiting bro gud luck
Link for the rom please..!!
Link please..!!!!
Link please
Hi i just made a simple app to improve battery and perfomance of any device running mm-pie .This app consist of 4 profiles which may fullfill ur need
TWEAKS INCLUDED
*interactive tweaks
*Ram Cleaner
*Graphics setprop tweaks
*Ram tweaks
*Reduces ram and cpu usage
*Gpu tweaks
*disabled battery hogging stuffs
*i/o tweaks
*animation tweaks
*zram tuning
*ksm tuning
*cpu tweaks
*vm tweaks
*cacahe cleaner
*app killer
*cpu & gpu tuning
*cache cleaner
etc......
-- More Features Will Come soon
WORKING
°Install , open the app and grant root permission
°select any profile icon
°wait for 10 sec for the confirmation vibration and the app will close istself.
TELEGRAM GROUP
t.me/vulmax_u
CREDITS
Thanks to :
@k1ks
@phantom146
@leolawliet
@Asiier
@FeraVolt
DONATION
Paypal : https://paypal.me/abiajay
Paytm : 7012559358
Trying this out immediately
Sent from my HTC One M8 using Tapatalk
It works ! RR3 is much fluid now on my NotePro 12.2
tin2404 said:
It works ! RR3 is much fluid now on my NotePro 12.2
Click to expand...
Click to collapse
tried gaming? also have u seen any battery drain
funkybrown said:
Trying this out immediately
Sent from my HTC One M8 using Tapatalk
Click to expand...
Click to collapse
any difference u found
I've tried it on my samsung smg350....i've not seen differences,still lagging when i play games :/
(maybe i've reached my limit....flashed upm and blend boosted on it)
Okay the app are indeed working it makes pubg runs faster on loading and gameplay
I'm currently running on miui 10 on redmi note 4
And I already mod every aspect of the phone
The audio , graphics ,UI , kernel
But this...
I don't know how you do it but it works
Before this I was using magisk GPU boost and gltool
Only gltool are working
GPU boost give me black screen
But this is everything I want it to be
Nice app
Ps: please develop the app and make it to magisk module , I'm it's going to be good exposure
hi dhanual,
This app is working fine, it gives smooth gameplay & fast on 2gb ram device, but when i play pubg game continously 1-2 hours my gameplay again gots laggy any solution for this, i think might be the reason for the cache of game. After exit the game, clean master found 1-1.5 gb cache & cleaned. I'm on Resurrection Remix Oreo 8.1 device model Nubia Z9 Mini
Plz continue the app development process.
KevinSmith21 said:
I've tried it on my samsung smg350....i've not seen differences,still lagging when i play games :/
(maybe i've reached my limit....flashed upm and blend boosted on it)
Click to expand...
Click to collapse
what about ui smoothness?? also try applying tweak then restart ur device once ,again apply tweak and run games.. by the way no need to restart always?
dhanual said:
what about ui smoothness?? also try applying tweak then restart ur device once ,again apply tweak and run games.. by the way no need to restart always
Click to expand...
Click to collapse
Ui is smoother,no lags or freeze:good: and used ram is 300mb(total ram is 717mb)
Waiting for new updates
dhanual said:
tried gaming? also have u seen any battery drain
Click to expand...
Click to collapse
Of course I play with it. It is much fluid then before.I noticed that scroling between ingame menus.About battery, I need more time to test.
The application don't open for me
sh0w 0f said:
The application don't open for me
Click to expand...
Click to collapse
u should grant root access at the first tym.. try reinstalling or clear data force stop and open again. or grant root permission from magisk or super su app
dhanual said:
u should grant root access at the first tym.. try reinstalling or clear data force stop and open again. or grant root permission from magisk or super su app
Click to expand...
Click to collapse
Ok ok I'll try it now
link broken,cant download
Sent from my OnePlus 3 using XDA Labs
Hi, thank you for your time making this and posting it. Unfortunately, it doesnt seem to help me. Tried it only on asphalt 9 so far, it lags more than before and in the end game also crashed which didnt happen before. I had already boosting apps so i guess the benefits of the others got neglected or so, but anyways seems it has room for improvement. I will try it tho in other games too and post it if i find a before/after difference
Bintang Krisna said:
link broken,cant download
Sent from my OnePlus 3 using XDA Labs
Click to expand...
Click to collapse
made new app and updated link ..try now
MCL95 said:
Hi, thank you for your time making this and posting it. Unfortunately, it doesnt seem to help me. Tried it only on asphalt 9 so far, it lags more than before and in the end game also crashed which didnt happen before. I had already boosting apps so i guess the benefits of the others got neglected or so, but anyways seems it has room for improvement. I will try it tho in other games too and post it if i find a before/after difference
Click to expand...
Click to collapse
app updated try now
It really works
Qusserel said:
It really works
Click to expand...
Click to collapse
great.. more updates will be released soon