Related
You should do a nandroid backup and reboot your phone before trying to flash anything to your phone. This how to involves flashing directly to mtd2, if you don't know what you are doing then please use one of the custom roms available in the Sticky Wiki.
#### Update One Fixed scripts
#### Update Two Added instructions to compile and install the wlan.ko module
#### Update Three Fixed get-CDMAHero-source.sh typo
#### Update Four Added Instructions for Jaunty repo's for Ubunut 9.10
First off i would like to give credit to all the people who have made information and scripts available. I used bits and peices of info and tools written by and or made available by these people.
Armin Coralic http://blog.coralic.nl for creating some nice scripts and making them available
chuckhriczko for helping me out in the middle of the night.
LoxDev for creating a wonderfull how to about creating img's and zip's
tkirkton for helping out with enabling legacy jaunty repos to install java 1.5
Second I am writing this How To, so a complete newbie would be able to understand.
REQUIREMENTS....
Ubuntu Desktop 9.04 or better 32bit (cause thats what i used)
Android SDK (Needed to push and pull files as well as shell access to the phone. You will need to set this up by following the instructions found at http://www.android.com)
Legacy repo's enabled in apt to allow java 1.5 to install
Root access. I ran all commands below as root
I created a dir called "heroc" in my /root directory.
Download zip file below and unzip it in the heroc dir that you should have created.
STEPS
.5 Enable Legacy Repo's to allow java 1.5 to install (below is a cut from tkirktons post on page 7)
Code:
in Ubuntu 9.10, the Java 1.5 package doesn't even list. Here's what I had to do to get it to load:
1. Access a repository from the previous build (9.04 Jaunty will work: commands to put into /etc/apt/sources.list -
deb [URL]http://mirrors.us.kernel.org/ubuntu[/URL] jaunty main restricted universe multiverse
deb [URL]http://mirrors.us.kernel.org/ubuntu[/URL] jaunty-backports main restricted universe multiverse
deb [URL]http://mirrors.us.kernel.org/ubuntu[/URL] jaunty-security main restricted universe multiverse
deb [URL]http://mirrors.us.kernel.org/ubuntu[/URL] jaunty-updates main restricted universe multiverse
2. Set the max age higher than the default. This can be accomplished by editing the /etc/apt/apt.conf.d/20archive. Here's what my lines in that file look like:
APT::Archives:MaxAge "2880";
APT::Archives:MinAge "2";
APT::Archives:MaxSize "1000";
Making these two changes should work...although I have the Intrepid, Hardy and Dapper repositories in mine as well (didn't know which one would work, so I overkilled it).
Run the script again after making the changes and let me know if it works.
.
to update just run
Code:
# apt-get update
1. Create your work environment by running createandroidRepo.sh. This will take some time depending on your internet connection. Make sure you are in the heroc dir.
Code:
# unzip Scripts.zip
# chmod a+x *
# ./createAndroidRepo.sh
This will create a dir call my android and setup all the files and programs needed to compile the kernel. This will take some time to complete.
2. You need to download the source using the get-CDMAHero-source.sh
Code:
# ./get-CDMAHero-source.sh
This will download the source, and extract it to its own directory.
3. you will need to have your .config file handy for the next steps. If you don't have it then you will need to get it by doing the following
Code:
# adb pull /proc/config.gz /root/heroc/config.gz
# gunzip config.gz
The first command will pull the gzipped config from your phone and place it into the heroc dir. the second command will extract the file as "config"
4. This is where it gets fun. We now have everything downloaded and are going to start the process of compiling our kernel.
Code:
# cd heroc_ef05d31a
# export ARCH=arm
# export CROSS_COMPILE=arm-eabi-
# export PATH=$PATH:~/heroc/myandroid/prebuilt/linux-x86/toolchain/arm-eabi-4.4.0/bin
# make menuconfig
After you run "make menuconfig" it will bring up a the config menu for our kernel. Go to the bottom and select "Load an alternate configuration file". It will then prompt you to select the config file you want to use. You will need to point it to where you have the config file. So type in "/root/heroc/config"
After you have loaded the config file you can edit what ever you want. however if you don't know what do disable or enable then i wouldn't mess around to much.
Next you will need to save your config file. Choose "Save an alternate configuration file", and save it as "/root/heroc/heroc_ef05d31a/.config"
You can now exit menuconfig
5. Time To Compile the kernel and wlan.ko module
Code:
# make
# export KERNEL_DIR=/root/heroc/heroc_ef05d31a/
# cd myandroid/system/wlan/ti/sta_dk_4_0_4_32/
# make
The kernel will take some time. go grab a drink and have a snack. If all goes well you should end up with a zImage file in "~/heroc//arch/arm/boot/". After the kernel is compiled you need to compile the wlan.ko module by executing the last three commands
6. Next we need to copy the zImage back to the heroc dir
Code:
# cp /root/heroc/heroc_ef05d31a/arch/arm/boot/zImage /root/heroc/zImage
7. Ok so now we need to get the boot image from our phone. We need this cause it has more than just the kernel. I contains the ramdisk image as well. and we need to take the boot image and decompress it and remove the old kernel and add our new compiled kernel, then recompress it to newboot.img
Code:
# adb shell
# cat /dev/mtd/mtd2 > /sdcard/mtd2.img
# exit
# adb pull /sdcard/mtd2.img /root/heroc/mtd2.img
# mv mtd2.img boot.img
The first two commands will open a terminal shell to your phone and copy the boot image to your sdcard. the last two commands will pull the the boot image from your phone, place it in your heroc dir and rename the file to boot.img
8. Now we will split apart the boot.img using some scripts.
Code:
# ./extract-kernel.pl boot.img
# ./extract-ramdisk.pl boot.img
# rm boot.img-kernel
# cp zImage boot.img-kernel
# ./mkbootfs boot.img-ramdisk | gzip > ramdisk-boot
# ./mkbootimg --kernel boot.img-kernel --ramdisk ramdisk-boot --cmdline "no_console_suspend=1 console=null" -o newBoot.img --base 0x19200000
The first command extracts the stock kernel from boot.img. The second command extracts the ramdisk from boot.img. The third command will delete the stock kernel. the fourth command renames our zImage to boot.img-kernel. The fifth command takes boot.img-ramdisk folder and zips it up into ramdisk-boot. The sixth comand takes our kernel (renamed to "boot.img-kernel") and ramdisk-boot and combines it back to form a new file called newboot.img.
9. Now we need to flash our "newboot.img" file to our phone. You should reboot your phone before flashing this will insure that you don't get any out of memory errors and will keep your phone from booting into fastboot (Thx Obelisk79).
Code:
# adb push newBoot.img /sdcard/newBoot.img
# adb shell
# cat /dev/zero > /dev/mtd/mtd2 (you may get an error here. don't worry about it)
# flash_image boot /sdcard/newBoot.img
# reboot
The first command will push your boot image to the phone. the second command will bring up shell access to your phone. the third command will zero out mtd2 and get it ready to write your image. the fourth command will flash boot(mtd2) with newboot.img. the last command will reboot your phone
10. After the phone reboots we need to get the wlan.ko file to the phone so that wireless will work
Code:
# adb push /root/myandroid/system/wlan/ti/sta_dk_4_0_4_32/wlan.ko /sdcard/wlan.ko
# adb shell
# mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
# cp /sdcard/wlan.ko /system/lib/modules/wlan.ko
# exit
Now you have a kernel that you compiles with everything work with the exception of power mgmt.
Just as soon as i figure out how to make an update.zip i will post instructions on how to do this
Added it to the CDMA Hero Guides wiki article.
gu1dry said:
Added it to the CDMA Hero Guides wiki article.
Click to expand...
Click to collapse
dang you beat me to it.
Not sure why, but had to run dos2unix on the the first script, not sure if it is all of them, but it was giving me the error
/bin/bash^M: bad interpreter: No such file or directory
Click to expand...
Click to collapse
dos2unix took care of the issue. Also Thanks for the guide, greatly appreciated!!!
make sure you run the script with the "./" , also you may need to chmod +x the files.
Is there a way to get this to run on the Emulator? I tried to specify the zImage after I compiled it but it won't boot when specifying it. Or will that not work for the HTC zImage?
Excellent guide. Can't wait to try it.
blehzz said:
Is there a way to get this to run on the Emulator? I tried to specify the zImage after I compiled it but it won't boot when specifying it. Or will that not work for the HTC zImage?
Click to expand...
Click to collapse
Check out this link
Check out this link
Click to expand...
Click to collapse
Thanks will have a look. Seems to be the Android kernel and not the HTC kernel though, but will read further into it
blehzz said:
Thanks will have a look. Seems to be the Android kernel and not the HTC kernel though, but will read further into it
Click to expand...
Click to collapse
not sure but i think this will work for you
Code:
# emulator -kernel /path/to/your/zImage
First script didn't work for me on ubuntu. Copying and pasting line by line works.
i'll repack the scripts again
not sure but i think this will work for you
Click to expand...
Click to collapse
that's what i tried... emulator never runs when i specify that zImage it built successfully.
Has anybody tried this yet with Ubuntu running under VMware on a PC running Windows? I know that (in theory) VMware's USB compatibility is spectacularly good (it somehow manages to give the guest OS direct ownership and control of the host PC's USB root hub), but up to now I've only tried it to run XP/32 under Vista/64 and Windows 7/64.
FYI, you can download VMware player for free (as in beer) and use it to run Ubuntu 9.04 with their complete blessing. Just make sure you download a guest OS that configures the hardware (memory, cpu, etc) the way you want it to be, because changing the hardware config is one of the few things you genuinely can't do with the free player. If someone here has the full version (and can find somewhere to host it so the bandwidth charges didn't eat him alive), he could even create an Ubuntu distro that's already set up and configured to build Android kernels for others here to download and use.
To use the first script: open up Synaptics, then download "tofromdos". Now, run "fromdos createAndroidRepo.sh", and it should work then
ROM?
Can someone post how to compile a kernel, and make a ROM, and put it all together in a update.zip? Would be really REALLY nice!
Jason(bikcmp)
Thanks for this guide I'm compiling a kernel right now Just a question, how do I change the kernel version name... like you did in that one screenshot?
bikcmp said:
Can someone post how to compile a kernel, and make a ROM, and put it all together in a update.zip? Would be really REALLY nice!
Jason(bikcmp)
Click to expand...
Click to collapse
Its coming
bikcmp said:
Can someone post how to compile a kernel, and make a ROM, and put it all together in a update.zip? Would be really REALLY nice!
Jason(bikcmp)
Click to expand...
Click to collapse
its in general options in menuconfig.
EDIT: Just updated post 2 you probably want to read both this post and that post before trying to build.
you can skip the part of getting the official source and the cyanogen source by just doing
Code:
repo init -u git://github.com/CyanogenMod/android.git -b froyo
First some prereqs You must be using linux and building for an evo 4G aka htc_supersonic
Install the android SDK as instructed here: http://developer.android.com/sdk/installing.html
You will need JDK most linux distros have this in the respositorys.
Then just follow step 2 and make sure that you can run adb from any directory in terminal.
Now to the good stuff.
You will now need to open a terminal window and run the following as root
Code:
cd /usr/bin/; curl http://android.git.kernel.org/repo > repo; chmod a+x /usr/bin/repo
now as user do the following
Code:
mkdir ~/android
cd ~/andoid
repo init -u git://android.git.kernel.org/platform/manifest.git
repo sync
This can take FOREVER like 4-5 hours so you might want to let it go when you go to sleep.
Depending on how fast your computer is the following step can take a long time too
Code:
cd ~/andoid
make
This will build the source code for a generic device it should build everything correctly if you have all of the compilers and what not. If it fails just install the app that it is complaining about.
Now for the EVO specific stuff
Code:
cd ~/android/device/htc
git clone http://github.com/CyanogenMod/android_device_htc_supersonic.git supersonic
That will get the build files however you are going to have to edit them to get it to work.
~/android/device/htc/supersonic/BoardConfig.mk needs to be edited
Code:
TARGET_RECOVERY_UI_LIB := librecovery_ui_supersonic librecovery_ui_htc
TARGET_RECOVERY_UPDATER_LIBS += librecovery_updater_htc
should be
Code:
#TARGET_RECOVERY_UI_LIB := librecovery_ui_supersonic librecovery_ui_htc
#TARGET_RECOVERY_UPDATER_LIBS += librecovery_updater_htc
Some other files may have to be edited to your liking. Personaly I changed ADWLauncher to launcher2 and removed all of the cyanogen stuff.
Now to setup the build enviroment.
Code:
cd ~/android
cp ./vendor/cyanogen/products/cyanogen_supersonic.mk ./buildspec.mk
. build/envsetup.sh
lunch cyanogen_supersonic-eng
Now to do the building.
Code:
make CYANOGEN_WITH_GOOGLE=true otapackage ## if you want google apps (market etc.)
make otapackage ## 100% Open Source only!
By the way for some reason you have to inclued the otapackage even if you just want the .img files because otherwise it crashes at least for me.
Let me know if you encounter any problems and I will try to help.
UPDATES
Copy your ~android folder somewhere and replace ~/android in this tutorial with the directory that you copied it to. This will allow you to update the overlay when needed.
To add google files you will need to do this
Code:
cd ~/android/vendor/cyanogen
./get-google-files
This gets the htc files and I think taht it might be required.
Code:
cd ~/android/device/htc/supersonic
./extract-files.sh
To make a clean rom like mine do the following:
Edit the file ~/android/vendor/cyanogen/products/common.mk to your liking. I just changed the build name and rom version.
I added the files sysrw and sysro ad you can see in the file just put them in a directory and tell it where they are and where you want them. Also I commented out rommanager.apk as I don't like or use it. Also I use RA recovery so it wont work for me anyway.
Also edit the file ~/android/vendor/cyanogen/products/cyanogen_supersonic.mk
I chaged teh build number to the latest spring and removed the boot animation as I like the stock android one better (and it is faster).
YOU NEED TO do this if you want a keyboard...
edit ~/android/vendor/cyanogen/Android.mk and remove LatinIME!
Now we delete some files.
go to ~/android/packages/apps
delete any application that you don't want. You can optionally add program source code that you do want.
I deleted CM* and Protips
I also edited some code in Settings to remove Cyanogen stuff. Actually I took the stock android stuff an edited that with one little fix but I forgot what it was. Just try to build and it will tell you in an error message.
another reserved post
Really cool
Awesome! Thanks so much for posting this.
thanks dude!!
Thanks man.
question...
im having an issue with this step
Code:
cd ~/adnroid
cp ./vendor/cyanogen/products/cyanogen_supersonic.mk ./buildspec.mk
. build/envsetup.sh
lunch cyanogen_supersonic-eng
specifically (lets ignore the type in the instructions
Code:
$ cp ./vendor/cyanogen/products/cyanogen_supersonic.mk ./buildspec.mk
cp: cannot stat `./vendor/cyanogen/products/cyanogen_supersonic.mk': No such file or directory
$ find ~/android -name "cyanogen_supersonic.mk"
$ echo $?
0
anyone else having this issue?
So what is the difference between this and running CM6?
Will this avoid the market issues with CM6?
Once it's built, how do you get it installed on the phone?
Here is the link to cyanogens wiki how too......
http://wiki.cyanogenmod.com/index.php?title=Compile_CyanogenMod_for_Supersonic
Anyway to do this on Windows 7? Another question, would this still work if I just ran Ubuntu from disk?
Thanks, will def.ly give this a try soon...
Sent from my PC36100 using Tapatalk
onicrom said:
question...
im having an issue with this step
Code:
cd ~/adnroid
cp ./vendor/cyanogen/products/cyanogen_supersonic.mk ./buildspec.mk
. build/envsetup.sh
lunch cyanogen_supersonic-eng
specifically (lets ignore the type in the instructions
Code:
$ cp ./vendor/cyanogen/products/cyanogen_supersonic.mk ./buildspec.mk
cp: cannot stat `./vendor/cyanogen/products/cyanogen_supersonic.mk': No such file or directory
$ find ~/android -name "cyanogen_supersonic.mk"
$ echo $?
0
anyone else having this issue?
Click to expand...
Click to collapse
there was a typo in my code I edited the post and it should work now.
cteneyck said:
Here is the link to cyanogens wiki how too......
http://wiki.cyanogenmod.com/index.php?title=Compile_CyanogenMod_for_Supersonic
Click to expand...
Click to collapse
So really, this is just CM6 built on your own Linux box?
Sent from my PC36100 using Tapatalk
Can this be done from ubuntu on a virtual machine?
And what's the difference between this and cm6 ?.....
how do you replace the adw launcher ?
how can you add additional applications?
onicrom said:
how do you replace the adw launcher ?
how can you add additional applications?
Click to expand...
Click to collapse
in vendor/cyanogen/products
replace this
Code:
#PRODUCT_PACKAGES += ADWLauncher
PRODUCT_PACKAGES += Launcher2
also all of the people asking what the differnece between this and cm is nothing unless you change the source files or add remove packages. they can be found in the packages directory.
Igotsanevo4g said:
Can this be done from ubuntu on a virtual machine?
And what's the difference between this and cm6 ?.....
Click to expand...
Click to collapse
yes you can do this in VM but i don;t know the exact steps to set that up just once you get into your linux VM follow the tutorial.
nice tut. thanks for this...sure it will help MANY
l33tlinuxh4x0r said:
in vendor/cyanogen/products
replace this
Code:
#PRODUCT_PACKAGES += ADWLauncher
PRODUCT_PACKAGES += Launcher2
also all of the people asking what the differnece between this and cm is nothing unless you change the source files or add remove packages. they can be found in the packages directory.
Click to expand...
Click to collapse
Thanks much
Hello
this is my first post
I tried to compile ClockWorkMod for my old Huawei Ideos X3 to learn new things. So i downloaded CyanogenMod Sources from Github and build the development environment to create the recovery Image for this device. These are the steps i did:
1. create needed tools
Code:
make -j4 otatools
2. get boot.img from device
Code:
adb kill-server
adb start-server
adb push dump_image /data/local
adb shell
-> su && cd /data/local/ && chmod 777 dump_image
-> ./dump_image boot /sdcard/img.boot
-> exit && exit
adb pull /sdcard/boot.img
3. prepare compiling
Code:
build/envsetup.sh
4. Open boot.img and create "metadata"
Code:
build/tools/device/mkvendor.sh HUAWEI U8510 ../boot.img
Code:
. build/envsetup.sh
-> lunch cm_U8510-eng
-> make -j4 recoveryimage
5. Flash Recovery
Code:
adb reboot-bootloader
fastboot flash recovery recovery.img
All in all compile cwm worked great but when i tried to flash the new recovery image, android said "not enough space left" so flashing progress stopped. I do not understand, becouse there are more than 100mb left on the device. This messed up the recovery partition and i was forced to flash one of the available cwm images to repair this. I do not know if i forgott one or more steps to compile a correct cwm.
Perhaps somebody could give me an andvice to solve this problem and help me understanding the entire progress.
THX
Sorry for my limited english skills...
Sorry for Double posting, but I was able to solve the problem by changing java version to jdk se 6 . Now I can boot cwm but select key doesn't work
Gesendet von meinem DARKMOON mit Tapatalk
Now tested up to downloading AOSP and make toolbox you should be all set
Please give thanks to this thread: https://forum.xda-developers.com/newreply.php?do=newreply&p=43622764
Warning: I hacked my way through this stuff a few weeks ago I am not an expert!
How to compile Android Open Source Code modules
I don't compile C code on Windows machines I have no idea about that.
Notice
This guide is a quick and dirty how to make a module. It will not cover finalizing setting up the source codes for your device. It is only my goal to enable you to compile binaries such as grep, toolbox, dumpstate, dalvikvm, jack and etc.
===>] Setup Ubuntu 64bit [<===Unplug that Windows drive, plug in a fresh hard drive and install Ubuntu latest/greatest. Ignore the recommendation to downgrade gnu make!, for now.
Open a terminal and issue these commands (warning ppa repository for OpenJDK 7 is said to have a security issue?, isn't being updated?.. whatevs it works)
Code:
sudo apt-get update
sudo apt-get upgrade
sudo add-apt-repository ppa:openjdk-r/ppa
sudo apt-get install openjdk-7-jdk
sudo apt-get install openjdk-8-jdk
sudo apt-get install libc6:i386 libncurses5:i386 libstdc++6:i386 lib32z1 libbz2-1.0:i386
sudo apt-get install git ccache automake lzop bison gperf build-essential zip curl zlib1g-dev zlib1g-dev:i386 g++-multilib python-networkx libxml2-utils bzip2 libbz2-dev libbz2-1.0 libghc-bzlib-dev squashfs-tools pngcrush schedtool dpkg-dev liblz4-tool make optipng
(choose Java 1.7 in the following way)
Code:
sudo update-alternatives --config java
(let me know if I missed anything please)
"Tried the Android SDK only it is missing too many things we need as a developer"
===>] Setup Android Studio SDK & NDK [<===Installation Paths:
*** I install to /home/username/Android and /home/username/Android/Sdk and /home/username/Android/Sdk/ndk-bundle ***
NOTE: from here forward username will == droidvoider
Note: Android Studio IDE isn't necessary only the SDK & NDK are needed to compile AOSP.
Install Android Studio Proper: (don't worry about setting up paths we will cover that, just install it)
https://developer.android.com/studio/install.html
or
SDK Only:
Typically we install these things manually by creating the directory then just unzipping the files there.
https://developer.android.com/studio/index.html#linux-bundle (scroll down for sdk only)
Code:
mkdir /home/droidvoider/Android
mkdir /home/droidvoider/Android/Sdk
(then unzip the sdk zip to that directory. I recommend the file explorer copy/paste right click uncompress and done.)
https://dl.google.com/android/repository/tools_r25.2.3-linux.zip
Install NDK through the SDK Manger:
(from terminal 'studio.sh' and then configure, and then sdk manger --- if this is hard to figure out tell me I will elaborate)
or
Manually Install Native Development Kit -- 'c programming support'
Download the Native Development Kit from Google: https://developer.android.com/ndk/downloads/index.html
Code:
mkdir /home/droidvoider/Android/Sdk/ndk-bundle
Then just unzip the ndk files into the directory we created above.
===>] Setup your toolchain [<===** This example is arm64-v8a aarch64 **
1. Navigate to /home/droidvoider/Android/Sdk/ndk-bundle/build/tools and then open a terminal "right click open area"
2. mkdir /home/droidvoider/toolchains
3. ./make_standalone_toolchain.py --arch arm64 --api 23 --stl=libc++ --install-dir /home/mm/toolchains/aarch64-linux-android-4.9
4. cd /home/droidvoider
5. gedit .bashrc and morph this in at the bottom.. (AND edit or replace the existing PATH variable)
DON'T just PASTE IN *my* $PATH export!! I included my entire path statements to show you.
Code:
export PATH=$PATH:/usr/local/android-studio/bin:/home/droidvoider/Android/Sdk/platform-tools:/home/droidvoider/Android/Sdk/ndk-bundle:/home/droidvoider/Android/Sdk/tools
I feel this is human readable, for example change Android_Build_Out to be on your desktop instead if you want.
Code:
export PATH=$PATH:/home/droidvoider/toolchains/aarch64-linux-android-4.9
export NDK=/home/droidvoider/Android/Sdk/ndk-bundle
export SYSROOT=$NDK/platforms/android-23/arch-arm64
export TARGET=aarch64-linux-android
export HOST=$TARGET
export BUILD=x86_64-linux
export ANDROID_NDK_BIN=/home/droidvoider/toolchains/aarch64-linux-android-4.9/bin
export CC=$ANDROID_NDK_BIN/aarch64-linux-android-gcc-4.9
export CPP=$ANDROID_NDK_BIN/aarch64-linux-android-g++
export AR=$ANDROID_NDK_BIN/aarch64-linux-android-ar
export OUT_DIR_COMMON_BASE=/home/droidvoider/Android_Build_Out
Note: You might want to setup an alternate toolchain also but this is all of the puzzle pieces.
===>] Google's version of this How To -- Just for reference [<===https://source.android.com/source/requirements.html
https://source.android.com/source/initializing.html
===>] Install the repo tool [<===https://source.android.com/source/downloading.html
(don't type repo init or repo sync --- I will be taking back over from there on the next page)
Added Repair Notes -- Not part of the install!
Have you accidentally installed or removed something you shouldn't have? (welcome to development, here try this before reinstall)
sudo apt-get clean
sudo apt-get update
sudo apt-get install -f
sudo dpkg -a --configure
sudo apt-get dist-upgrade
sudo apt-get install -f
sudo dpkg -a --configure
Selecting the correct AOSP branch and downloading it.
Tested up to downloading AOSP and make toolbox -- you should be all set
===>] Match your build number to it's AOSP sources [<===preface: You can get this from your device if you're on the same build id as your the available source code from your vendor for your device. Otherwise you need to open the AP file from the firmware that matches those available sources to extract the system.img, to extract build.prop. I explain how to open a system.img file below under retrieving your hardware drivers. build.prop is in the main directory of system.img
(Many times the build number is the same. For me I believe all of MM builds are using this number.)
Assumes sources match current device, worked out true in my case
1. Plug in your device and get it connected. (DEVELOPER OPTIONS|USB DEBUGGING) and select allow on device
2. Retrieve the build number that matches the available sources for your device.
From your ubuntu terminal retrieve the build id using this command:
Code:
adb shell getprop | grep 'ro.build.id'
Yields something similar to this: [ro.build.id]: [MMB29K]
3. Match it up to the Nexus build numbers (This info is for AT&T Note 5 Marshmallow MMB29K, get your specific build number!)
https://source.android.com/source/build-numbers.html#source-code-tags-and-builds
MMB29K android-6.0.1_r1 Marshmallow Nexus 5, Nexus 5X, Nexus 6, Nexus 7 (flo/deb), Nexus 9 (volantis/volantisg)
===>] Bring down a specific AOSP source branch [<===
4. Make a directory for the source code.
Code:
mkdir /home/droidvoider/Desktop/AOSP_Android_6.01_r1
5.
Code:
cd /home/droidvoider/Desktop/AOSP_Android_6.01_r1
6. Bring down the sources, this one is approximately 13 gigabytes
Code:
repo init --depth=1 -u https://android.googlesource.com/platform/manifest -b android-6.0.1_r1
repo sync
===>] I'm not sure the rest of this is needed [<===For compiling toolbox the remainder wasn't needed.. But I have a large list of things to do so I can't test each item. If you can't compile a specific module continue reading.
===>] Merge Vendor sources & AOSP sources [<===
7. Download the available sources for your device. In this example I downloaded PE6 Marshmallow sources for AT&T Note 5:
http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=SM-N920A
8. Read the readme file from the sources platform zip to understand how to merge them into the AOSP sources. For the 2 Samsungs I've worked with the idea is to replace any directory that already exists. But if there is just one file such as core.mk only replace the one file. Then edit the .mk files as described in your readme. (and/or take info from cyanogen/lineagos) -- <I can help more, ask>
note: you probably don't need to take the configs from LineageOS and put them into your .mk files. However, if you do need to get more configs then you should get a big fat message when you type make 'modulename'. At first only edit .mk files as described by vendor device source readme file.
===>] Merge in Hardware drivers and etc [<===possibly unnecessary depends what you're doing
9. Obtain a copy of the firmware for your device that matches the version of the source code you are able to download from your vendor.
for me that was Build Number: MMB29K.N920AUCU2BPE6 but your mileage will almost certainly vary!
10. Download https://github.com/anestisb/android-simg2img
11. Unzip it right in your download folder, open the folder and then 'open in terminal'
12. Make it and then move it a directory in your path. Warning: My command puts in in the Ubuntu default /bin folder.
Code:
make
sudo mv append2simg img2simg simg2img simg2simg simg_dump.py /bin
13. Uncompress the AP file from the matching firmware and extract the system.img into it's own directory
then select that folder, right click, open in terminal
Code:
simg2img system.img sys.raw
mkdir sys
sudo mount -t ext4 -o loop sys.raw sys/
14. A drive mounted, look on your task bar it should've wiggled too. Copy the etc and vendor folders into the main folder of the sources we are merging
===>] Listing and building modules [<===Navigate to the folder where you download the sources "/home/droidvoider/Desktop/AOSP_Android_6.01_r1" and open in terminal.
Code:
make modules -- list the available modules
make <module name> -- builds a specific module
example: make dumpstate
description: Will build everything needed for dumpstate and place it in the folder we specified in our export (above step). The final build line will read install and detail the final output folder
Example successful output:
[CODE]
Install: /home/droidvoider/Android_Build_Out/Android_6.01_r1/target/product/generic/system/bin/dumpstate
===>] Android Build System, basic intro [<===Notice: I built this how to to answer the same question from 3 people regarding working with toolbox and the dirtycow exploit. So I decided to give a direct example of using toolbox.c from farm-root
#ifdef
Our makefile is Android.mk and that's where we link things together. If you look at the Android.mk file for farm-root you will notice bridge.c is used 3 different times called different 'module' names. bridge_pull, bridge_push, bridge_pull_boot. Each of these will be binaries of those names.
Inside bridge.c you will see #ifdef FARM_PULL and then you will see #else and further you will see #endif which you may have noticed matches inside the Android.mk file for the bridge modules -DFARM_PULL -DFARM_BOOT <== Notice the double define on bridge_pull_boot
toolbox.c
toolbox.c is going to be the same way. You will need to copy shared.h and shared.c into the directory where toolbox.c resides. Then edit the Android.mk, in our example:
1. Navigate to this directory and open: system/core/toolbox/Android.mk
2. CTRL + F and search for "LOCAL_MODULE := toolbox"
3. Add: LOCAL_CFLAGS += -DFARM_PULL -DFARM_BOOT (in this example add one, both or even new ones you created)
4. Navigate to the main directory of the sources, you should see a Makefile and a build_64bit.sh
5. from terminal: make toolbox
Note: I think from here you can Google it out in a few minutes if that is not the case please let me know.
Working with C cross platformUbuntu is Linux based just like Android and this makes testing blocks of code extremely easy. You of course can't use Android headers and in some rare cases you can't test the code on Ubuntu at all but in most cases you can. When I want to design something for Android I open gedit and save it as a .c file. Then I compile it using gcc -o mycode mycode.c There's plenty of examples on using gcc with linux but just understand you can do it all. Then before too much work test it on Android. (helpful commands at end of post)
My advice really is to build out your small blocks of code on your linux box but then paste them into your Android program folder, edit your Android.mk, add it to your Makefile including your 'push' section so that you can simply type make push to test it.
I am in fact trying to encourage you to learn C and not so much trying to encourage you to hack things. But I know that interest/passion is what teaches, not my words and not someone else's curriculum. So in that spirit I will do my best to give examples to help you with 'whatever' it is you are passionate about. Let me know what's missing.
Don't forget to compile for Android first
Before you can test your code you will have compiled it using the cross compiler for Android. ndk-build, or the correct gcc cross compiler. (Personally I put the .c file into a directory with Android.mk and a Makefile then just type make to build it to Android)
see examples section I will add a couple examples.
Android Developer Bridge -- a developers tool
adb is included with the Android SDK along with some other tools. Some of those tools are fastboot for unlocking bootloaders and another way of flashing. There is monitor which is a cool tool for remotely viewing processes, logcat, memory dumps and etc.
But pointedly what we will use the most is simply adb.
Using adb to test your code on locked down Android systems
Shell has fairly high privileges, you may not be aware but you can execute binaries and bash scripts. We use /data/local/tmp/ for these things. You can create a directory, add or remove files, execute your binaries and even execute shell scripts using sh script.sh
ndk-build places the binary in libs/(arch type) .. For a quick test you can just open a terminal in that directory then:
Code:
adb push mybinary /data/local/tmp/
adb shell
cd data/local/tmp
chmod 777 mybinary
./mybinary
Added:
Examples of basic make files for Android.
happy coding
If you get an errorPlease reissue the command but pipe the output to a file.
make toolbox > /home/droidvoider/Desktop/build_toolbox-output.txt
zip that up with your source code, including your customized header files and attach it to this thread.
puzzles are fun but I like all the pieces
droidvoider said:
Tested up to downloading AOSP and make toolbox -- you should be all set
===>] Match your build number to it's AOSP sources [<===preface: You can get this from your device if you're on the same build id as your the available source code from your vendor for your device. Otherwise you need to open the AP file from the firmware that matches those available sources to extract the system.img, to extract build.prop. I explain how to open a system.img file below under retrieving your hardware drivers. build.prop is in the main directory of system.img
(Many times the build number is the same. For me I believe all of MM builds are using this number.)
Assumes sources match current device, worked out true in my case
1. Plug in your device and get it connected. (DEVELOPER OPTIONS|USB DEBUGGING) and select allow on device
2. Retrieve the build number that matches the available sources for your device.
From your ubuntu terminal retrieve the build id using this command:
Code:
adb shell getprop | grep 'ro.build.id'
Yields something similar to this: [ro.build.id]: [MMB29K]
3. Match it up to the Nexus build numbers (This info is for AT&T Note 5 Marshmallow MMB29K, get your specific build number!)
https://source.android.com/source/build-numbers.html#source-code-tags-and-builds
MMB29K android-6.0.1_r1 Marshmallow Nexus 5, Nexus 5X, Nexus 6, Nexus 7 (flo/deb), Nexus 9 (volantis/volantisg)
===>] Bring down a specific AOSP source branch [<===
4. Make a directory for the source code.
Code:
mkdir /home/droidvoider/Desktop/AOSP_Android_6.01_r1
5.
Code:
cd /home/droidvoider/Desktop/AOSP_Android_6.01_r1
6. Bring down the sources, this one is approximately 13 gigabytes
Code:
repo init --depth=1 -u https://android.googlesource.com/platform/manifest -b android-6.0.1_r1
repo sync
===>] I'm not sure the rest of this is needed [<===For compiling toolbox the remainder wasn't needed.. But I have a large list of things to do so I can't test each item. If you can't compile a specific module continue reading.
===>] Merge Vendor sources & AOSP sources [<===
7. Download the available sources for your device. In this example I downloaded PE6 Marshmallow sources for AT&T Note 5:
http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=SM-N920A
8. Read the readme file from the sources platform zip to understand how to merge them into the AOSP sources. For the 2 Samsungs I've worked with the idea is to replace any directory that already exists. But if there is just one file such as core.mk only replace the one file. Then edit the .mk files as described in your readme. (and/or take info from cyanogen/lineagos) -- <I can help more, ask>
note: you probably don't need to take the configs from LineageOS and put them into your .mk files. However, if you do need to get more configs then you should get a big fat message when you type make 'modulename'. At first only edit .mk files as described by vendor device source readme file.
===>] Merge in Hardware drivers and etc [<===possibly unnecessary depends what you're doing
9. Obtain a copy of the firmware for your device that matches the version of the source code you are able to download from your vendor.
for me that was Build Number: MMB29K.N920AUCU2BPE6 but your mileage will almost certainly vary!
10. Download https://github.com/anestisb/android-simg2img
11. Unzip it right in your download folder, open the folder and then 'open in terminal'
12. Make it and then move it a directory in your path. Warning: My command puts in in the Ubuntu default /bin folder.
Code:
make
sudo mv append2simg img2simg simg2img simg2simg simg_dump.py /bin
13. Uncompress the AP file from the matching firmware and extract the system.img into it's own directory
then select that folder, right click, open in terminal
Code:
simg2img system.img sys.raw
mkdir sys
sudo mount -t ext4 -o loop sys.raw sys/
14. A drive mounted, look on your task bar it should've wiggled too. Copy the etc and vendor folders into the main folder of the sources we are merging
Click to expand...
Click to collapse
And where is exactly the main folder? Sorry, Im just confused
DigitalDoraemon said:
And where is exactly the main folder? Sorry, Im just confused
Click to expand...
Click to collapse
it's no problem this stuff isn't easy to just figure out on your own. remember to substitute droidvoider for your ubuntu user name
In this example my sources are on my desktop in a folder named Android_6.01_r1
Sources for toolbox for example:
/home/droidvoider/Desktop/Android_6.01_r1/system/core/toolbox/<sources will be here including Android.mk>
Script for modules, including toolbox
/home/droidvoider/Desktop/Android_6.01_r1/Makefile <--- this is our modules script, if you will
<open a terminal in the above folder then use that Makefile like so>
make toolbox <---- this will compile only what is needed to compile the module 'toolbox' (this takes a minute)
Out export folder we decided in ./home/droidvoider/bashrc
/home/droidvoider/Android_Build_Out/Android_6.01_r1/target/product/generic/system/bin
Anybody, please compile grep utility for arm and x86... Minimum Platform Version Android 4.0.3, API Level - 15
Thanks
Great & useful .
Hey guys!
I tried building LineageOS 15.1 from source. No issues here, works great!
But here is the problem: I now want to include an app I developed into the system build.
Earlier, I did this by adding the files to the BUILD_DIR/packages/apps/<App name> directory. But to include it in the system, I had to rebuild the ROM from scratch.
The app uses an Android.mk file and not Gradle.
Also, if I modify an existing source file (say Activity.java), then how would I proceed, short of rebuilding the ROM?
I wanted to know if there is a more efficient way to build a part of the system. Any help would be appreciated.
Thank You
EDIT:
Found the answer. For anyone who needs it:
Note: This applies only if you have already built the system once and haven't deleted the output files.
Open the Android.mk file in the source tree that you want to build.
Find a line LOCAL_MODULE := <module_name>
Go to the project root folder.
Enter the following lines in the terminal:
Code:
$ source build/envsetup.sh
$ breakfast <device_name>
$ mka <module_name>
Then, to build the flashable zip:
Code:
$ brunch <device_name>