2 TF700 issues 1.freezes and reboots 2. Power button turns off tablet - Asus Transformer TF700

Hi guys I recently install Cyanogenmod onto my Asus TF700 and now every time I go to the main screen which is the home screen I get to use the tablet for a tiny bit and then it freezes and then reboots! Also everytime I press the sleep button/power button the tablet shuts down without a question. I previously had CROMI and nothing like this occurred. Does anybody know of a fix or has the same issue?
I have TWRP latest version and yes my Asus is unlocked. Please help me out here

Mkami said:
Hi guys I recently install Cyanogenmod onto my Asus TF700 and now every time I go to the main screen which is the home screen I get to use the tablet for a tiny bit and then it freezes and then reboots! Also everytime I press the sleep button/power button the tablet shuts down without a question. I previously had CROMI and nothing like this occurred. Does anybody know of a fix or has the same issue?
I have TWRP latest version and yes my Asus is unlocked. Please help me out here
Click to expand...
Click to collapse
Looks like you are using an old bootloader, it must be 10.6.1.14.x.

_that said:
Looks like you are using an old bootloader, it must be 10.6.1.14.x.
Click to expand...
Click to collapse
Hey buddy thanks for the reply. I updated the bootloader and everything is working well

Related

Problem after rooting

Hey there!
Got asus transformer today,
updated to 3.2 and then tried rooting with this guid:
http://forum.xda-developers.com/showpost.php?p=14813252&postcount=52
After rooting i restarted the asus and it lookes like this:
http://dl.dropbox.com/u/7511203/IMAG0733.jpg
any suggestions how to fix this?
thanks
What is the serial number of your TF. Look at the bottom, should be a sticker starting with a BxO... (x= a number).
If you have a newer tablet chances are you have a new SBK which is unrootable.
If older rootable version I would say use NVFlash method.
hi!
i got
SN:B60KAS222955
i tried nvflash and installed "prime-rom".
Now the device boots normaly,
but the touchscreen does not work.
I can not click any button on the screen...
solution for this?!
Thanks for help!
breytex said:
hi!
i got
SN:B60KAS222955
i tried nvflash and installed "prime-rom".
Now the device boots normaly,
but the touchscreen does not work.
I can not click any button on the screen...
solution for this?!
Thanks for help!
Click to expand...
Click to collapse
are you able to get into CWM recovery?
-press and hold the volume button down plus the power button
-when you see some words scrolling at the top left side push volume up
within 5 sec.
If you're able to get into CWM than do a full wipe and flash Prime 1.8 or 1.9
Another alternative I've heard of is to let the battery drain itself out, plug the charger in and it should work.
yea, i will try that with battery-drain...
read that in an other thread...
thanks for help, i will report my results
Thanks!

[Q] Tf300t stuck at bootscreen and can't get into recovery options.

Hey,
My Asus Tf300t has been working perfectly until I wanted to get into recovery mode (RCK) yesterday. It got stuck there and
I tried it another time and it didn't work. After that I let it go and just booted normally, but then it stayed at the "ASUS Inspiring inno.... etc." screen.
Now I can shut my device down by holding the power button, but I cant get it to cold boot or get into recovery options again, it just boots endlessly.
My device has been unlocked and working fine for months.
What can I do?
regards,
Pmobilee
make sure that you are hold the "volume down" button, and hope it puts you back to where you can boot into recovery. Does that tablet boot at all, or just a "bootloop"
Did you have a working recovery before this? Like have you booted your recovery before and know that it was working?
Sent from my Nexus 7 using xda app-developers app
tazzz013 said:
make sure that you are hold the "volume down" button, and hope it puts you back to where you can boot into recovery. Does that tablet boot at all, or just a "bootloop"
Click to expand...
Click to collapse
Yes, I have been into the recovery and know the procedure. And im afraid the boot goes as far as the asus logo.
markymark567 said:
Did you have a working recovery before this? Like have you booted your recovery before and know that it was working?
Yes, recovery booted before. But this all started when I tried to boot recovery again, and it got stuck. Then this infitite boot occurred.
Click to expand...
Click to collapse
and when you tried to boot recovery again what method did you use? did you use the "reboot recovery" option in your recovery or ROM power menu?or did you do it manually?(hold vol- and power then press vol+)?
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Hi all. I'm in the exact same situation. Didn't want to make a new thread though.
I rooted my TF300T a few months ago (Oct 2013), and it has been running fine on CyanogenMod 10.2. So I ran the CyanogenMod Update app (Settings > About Tablet > CyanogenMod Updates), then downloaded the LATEST nightly (dated yesterday: Dec 14, so 10.2...141213). I don't know if this is a factor, but I usually pull down the notification bar and tap the "Reboot and Install" option, but I accidentally cleared my notifications, so I went back into CyanogenMod Updates, tapped the installed button for the latest nightly, and tablet started rebooting.
However I cannot get past the boot screen. So recovery is not loading. I used TWRP last time I did this. I Can't turn the tablet off either, at least not until I plugged the USB from my PC to the tablet then tried long pressing the Power button and holding Volume Down. Before plugging USB in it would simply restart and sit on the boot screen again.
I have to leave the house for now, but will attempt to get into Recovery later tonight with same methods as above. Fingers crossed!
EDIT: I remembered, it was 10.2, not 10.1 I was running. So I shouldn't have had any issues going from 10.2 to a newer 10.2.
I'm back home now. I've tried again to get into Recovery, but cannot. I've got the tablet plugged into the PC with the USB, I'm holding Power and Volume Down, but nothing. Instead it seemly turns off, but comes back on and stays on the same boot screen (Asus. Inspiring Innovation, etc...).
And I can't figure out how I was able to turn the damn thing off before either. So I have to leave it on until the power drains. So that sucks!
Is it bricked?
Let's do this together. I recently tried to upgrade to 4.4 from 4.3 and I accidently erased my tablet by manually booting into twrp 2.5 and selecting the 3rd option which is wipe data...so we are in the same boat.
Has your battery drained yet?
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Ideas4ya said:
Let's do this together. I recently tried to upgrade to 4.4 from 4.3 and I accidently erased my tablet by manually booting into twrp 2.5 and selecting the 3rd option which is wipe data...so we are in the same boat.
Has your battery drained yet?
Click to expand...
Click to collapse
Damn, that sucks! Yes, battery has now drained, and yes, let's work this out together. What ROM were you using? Android 4.4 is not out on CyanogenMod for the TF300T, and I will probably stick to CM. But if I have to use something else to get this fixed, I'll do it.
Was any fix found for this? I am now experiencing the same problem after trying to reboot into recovery to upgrade Cyanogen. Any help would be appreciated.
fdbryant3 said:
Was any fix found for this? I am now experiencing the same problem after trying to reboot into recovery to upgrade Cyanogen. Any help would be appreciated.
Click to expand...
Click to collapse
Nope, and after a lot of support and help from the good guys on the Transformer Forums, I've declared this unfixable. If you had a NVIDIA backup, you'd be fine, but without that you're pretty much screwed, sorry to say.
Can you get into bootloader? If so you can do this:
http://forum.xda-developers.com/showthread.php?t=2425581
And it should resolve ANY bad flash/wrong flash issues.

[Q] Only asus bootscreen, no recovery or boot - Is it Bricked?

Good evening all?
Ive unlocked my TF300T a year back and had been running Cyogenmod 10.1 on it for months, all worked fine.
As a recovery i had CWM installed and it worked like a charm as well.
A week ago i saw Cyogenmod 10.2 was out there and i wanted to switch the recovery to TWRP (i installed ver 2.6.x.x) and tried the new Cyogenmod.
It sisnt work so i wanted to switch back to 10.1 and CWM.
I dont exactly know what i did but in the end even the vol down and power button menu doesnt work anymore.
The tab turn on now and shows the Asus start screen but doesnt boot up.
Also when i press vol down and the power button it doesnt load the boot menu where i can install a new recovery and install the old Cyogenmod.
When its powered on i cant even turn of the tab, it keeps turning on for a few minutes in the Asus logo screen and than turn off and on again... till the battery is empty.
Did i brick my tablet ?
Are there any ways i can try to get the original software back?
Any help would be greatly appreciated.
Cheers !
Marty
Same situation with me....i think u have Hard Bricked your Tablet. The only option is Change the motherboard. So u need to send it to Asus..
Sent from my iris504Q using XDA Premium 4 mobile app
Did you update your bootloader to the JB one?
It IS Lupus said:
Did you update your bootloader to the JB one?
Click to expand...
Click to collapse
I think i didn't...
At first i just unlocked the device, installed recovery CWM and after a version (januari 2013) of Cyogenmod 10.1 wich was Android 4.2.2 and kept the Cyogenmod 10.1 up to date every few weeks... Thats all i did till i wanted to install Cyogenmod 10.2 (Android 4.3)
I can't recall updating the bootloader myself, could have been with an Asus update or something but i think i din't do it myself.
CM changed to the updated PITs when Asus updated first.
best solution would be to flash latest stock, boot into it once, flash twrp2 (2.6.0.0 works for me atm) then flash cm10.2
here is my summary
http://forum.xda-developers.com/showpost.php?p=44244313&postcount=12
hope it helps
and no, i don't think you need to send it in for repair - it sounds more like broken PIT's so mount and boot points are not being recognized anymore.
gl
-Buster
Buster99 said:
CM changed to the updated PITs when Asus updated first.
best solution would be to flash latest stock, boot into it once, flash twrp2 (2.6.0.0 works for me atm) then flash cm10.2
here is my summary
http://forum.xda-developers.com/showpost.php?p=44244313&postcount=12
hope it helps
and no, i don't think you need to send it in for repair - it sounds more like broken PIT's so mount and boot points are not being recognized anymore.
gl
-Buster
Click to expand...
Click to collapse
Thanks for your reply, how do i get to give fastboot commands when starting with volume down + power doesn't work anymore.
The only thing i have left is volume up + power to boor into APX mode and i cant seem to get the right usb driver for the TF300T
Cheers !
Tablet gets stuck on boot animation
I have a rooted asus tf300t and it will turn on but not get past the boot animation. I have tried to reset it using the bootloader but it will still not work. if anyone has any suggestions, i would like to hear them. i am a complete noob so please try to keep it simple. thanks
Tablet gets stuck on boot animation
I have a rooted asus tf300t and it will turn on but not get past the boot animation. I have tried to reset it using the bootloader but it will still not work. if anyone has any suggestions, i would like to hear them. i am a complete noob so please try to keep it simple. thanks
geronphillips said:
I have a rooted asus tf300t and it will turn on but not get past the boot animation. I have tried to reset it using the bootloader but it will still not work. if anyone has any suggestions, i would like to hear them. i am a complete noob so please try to keep it simple. thanks
Click to expand...
Click to collapse
More details will be needed before someone can help. What had you done right before it acted up? What rom do you have in there ATM? Can you post a picture or tell what's on the initial screen (the one before the boot animation)? Did you try volume down + power? If you did, what did the screen show?
graphdarnell said:
More details will be needed before someone can help. What had you done right before it acted up? What rom do you have in there ATM? Can you post a picture or tell what's on the initial screen (the one before the boot animation)? Did you try volume down + power? If you did, what did the screen show?
Click to expand...
Click to collapse
I rooted my device using the method shown on this page
http://forum.xda-developers.com/showthread.php?t=2228613I
, the ROM is stock and the screen before the animation is normal (white Asus text). I have tried volume down and power and from that screen, I reset my tablet. This didn't solve the issue, before this started, I changed the boot animation and changed fonts. I think it was while restarting after the font change that it stopped booting properly.
geronphillips said:
I rooted my device using the method shown on this page
http://forum.xda-developers.com/showthread.php?t=2228613I
, the ROM is stock and the screen before the animation is normal (white Asus text). I have tried volume down and power and from that screen, I reset my tablet. This didn't solve the issue, before this started, I changed the boot animation and changed fonts. I think it was while restarting after the font change that it stopped booting properly.
Click to expand...
Click to collapse
I gather by "reset my tablet", you meant you cold booted it by selecting the android icon. This being the case, you can always reflash the stock ROM with fastboot. Depending on whether you had 4.1 or 4.2 bootloader - 4.1 has 4 icons including a USB icon which if clicked, will make the tab enter fastboot/download mode; 4.2 will enter that mode automatically as you press volume down+power - you need to choose the right ROM you want to install. The initial screen should tell you which bootloader on the top left corner. 4.1 matches stock Roms commencing with 10.4.x.xx; 4.2 is Roms with 10.6.x.xx
I've flashed a 4.1 ROM (104220) on a tab with 4.2 bootloader by means of an external SD card without problems. However, to be safe, you should flash whatever version you'd had before the incident. If you already have data on the tab that you care to keep, you shouldn't touch the wipe date icon. If you need a link as to what to do, read this one. Good luck.

[Q] TF300T shutdown for no reason

When I leave the tablet for 30 minutes, when I come back the tablet is off. Apart this problem it running very good.
I'm on the last nightly, no custom kernel, only CM11 with Google stock package from http://forum.xda-developers.com/showthread.php?t=2397942.
Thank
TechnoBear26 said:
When I leave the tablet for 30 minutes, when I come back the tablet is off. Apart this problem it running very good.
I'm on the last nightly, no custom kernel, only CM11 with Google stock package from http://forum.xda-developers.com/showthread.php?t=2397942.
Thank
Click to expand...
Click to collapse
Are you sure it has shut down, or just failed to startup from sleep with the screen displaying black?
cmendonc2 said:
Are you sure it has shut down, or just failed to startup from sleep with the screen displaying black?
Click to expand...
Click to collapse
Yea maybe.
I'll try to get a logcat when it happen.
I can't get a logcat since the tablet is not recognized with adb when I try to start the tablet from sleep.
Do you have a idea what I can do to get some information that can help to find the problem ?
TechnoBear26 said:
I can't get a logcat since the tablet is not recognized with adb when I try to start the tablet from sleep.
Do you have a idea what I can do to get some information that can help to find the problem ?
Click to expand...
Click to collapse
Run the logcat before you put the tablet to sleep and have it write to a file.
I have had exacly same issue when I initially flashed CM10.2.
This problem disappeared after I performing a factory reset.

[Q] Tf300T hard brick, screen won't go on

Hi people,
So, during flashing the stock rom on my Tf300T (which I've used before) the installation stayed on the same spot for over an hour. I thought it was a good idea to turn off the power and do it all over again. Unfortunately the device doesn't turn on anymore. Or at least, the screen doesn't. It gets recognised by windows but not by fastboot. Is there anyone who can tell me what to do?
Thanks in advance!
Ownsta

Categories

Resources