Hey people, you brainiacs seem to be my last hope.
Been flashing Saturn III on my SV with TWRP and flashed, as the dev stated to do, the boot.img in fastboot.
After rebooting, it stucked on the HTC-Logo with white background till i removed the battery.
Then I tried flashing back the stock boot.img Link: ht tp://fs1.d-h.st/download/00084/DMf/boot.img
With that one it boots n all works fine but the WLAN.
So yeah.. all devs tell to flash the boot.img to get WLAN to work, but if I do so, the whole phone wont start anymore.
Already tried with Saturn III and "my slim rom" from this site.
Here are my phone specs:
K2_U PVT SHIP S-ON RL
HBOOT-2.21.0000
RADIO-1.18.40a.00.05
OpenDSP-v13.2.0268.0620
OS- (with the stock boot.img it shows the OSrev)
eMMc-boot 1024
What I would need is a 4.1.2 OS, stock or slightly modded
Has somebody got any solution for me?
Alot thanks in advance
Strange, as you are S-On, you must flash the boot.img.
You can try to use the boot.img, you will find in this thread.
Thanks for the fast reply.
Yeah, pretty strange..
Tried that boot.img - same effect.
want me to flash that kernel's .zip too?
forgot to tell you: Ofc I'm HTCDev unlocked.
fwaqo said:
Thanks for the fast reply.
Yeah, pretty strange..
Tried that boot.img - same effect.
want me to flash that kernel's .zip too?
forgot to tell you: Ofc I'm HTCDev unlocked.
Click to expand...
Click to collapse
You fastboot flashed the boot.img?
!#quote my post if you want to get my attention more quickly
russellvone said:
You fastboot flashed the boot.img?
Click to expand...
Click to collapse
yeah i did.
And explain in a little more detail of what the exact issues are, we will be able to assist you better.
Just so I can get a better grasp(visualization) of what's going on.
!#quote my post if you want to get my attention more quickly
You already did the OTA to 422, as i see on your hboot.
Maybe there is the problem.
But if stock kernel boots, but only wifi not working, try to flash this zip from recovery (boot.img for fastboot).
It's stock k2u kernel and the needed libs for Wifi.
russellvone said:
And explain in a little more detail
Click to expand...
Click to collapse
hmmm.. what else could i tell you..
Flashing works all fine, i get success when i'm flashing a ROM and sucess when flashing the boot.img via fastboot.
The only thing is when I'm flashing the boot.img of the ROMs, the device won't boot and only show the HTC-logo on white background and never boot (waited a hour already).
The boot.img that i linked to seems to be the only one thats working.. (maybe someone could have a look on what makes that one so special?)
Result in usint that working boot.img on the ROMS is a non-working WLAN.
Please tell me if there is any other specific thing you need to know, as I dont know anything else to write atm.
You flashed a 4.2 rom? Or a 4.1?
!#quote my post if you want to get my attention more quickly
---------- Post added at 02:54 PM ---------- Previous post was at 02:45 PM ----------
Do me a favor
Go into twrp recovery and wipe
System
Cache
Data
Dalvik cache
Then flash rom again
Then reboot bootloader
Then flash the boot.img from inside the ROM
fastboot flash boot boot.img
and reboot....
!#quote my post if you want to get my attention more quickly
Isn't Saturn III based on 4.1.2??? Wouldnt that cause a conflict with 4.2.2 since the kernel is found in the boot.img? Like trying to crossbreed a dog and a cat?
Sent from my C525c using XDA Premium 4 mobile app
russellvone said:
You flashed a 4.2 rom? Or a 4.1?
Click to expand...
Click to collapse
I'm running old.splatterhand's Saturn III ROM which is 4.1.2 afaik.
Tried the kernel + boot.img you linked me, old.splatterhand. Still stuck on the HTC logo...
I'm at the end of my ideas..
I'm skimming through these right now cuz I'm at work still ha!
Sent from my C525c using XDA Premium 4 mobile app
---------- Post added at 02:54 PM ---------- Previous post was at 02:45 PM ----------
Do me a favor
Go into twrp recovery and wipe
System
Cache
Data
Dalvik cache
Then flash rom again
Then reboot bootloader
Then flash the boot.img from inside the ROM
fastboot flash boot boot.img
and reboot....
!#quote my post if you want to get my attention more quickly
Just do what is wrote in post 7, od use fm to copy modules from the zip.
Modding.MyMind said:
I'm skimming through these right now cuz I'm at work still ha!
Sent from my C525c using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'm at work too! Lol
!#quote my post if you want to get my attention more quickly
russellvone said:
do me favor
Click to expand...
Click to collapse
Did that now.. still hangs at the HTC-Logo.
I already tried the kernel of post #7.
@russellvone @old.splatterhand
Correct me if I am wrong. Just going on a hunch. Saturn III is based on 4.1.2. @fwaqo is currently on 4.2.2. So would he not need to downgrade in a sense as far as the necessary partitions (images) would be needed in order for this Rom to comply without complications? Mainly, thinking on the matter of the kernel which is found in the boot.img which is technically a build for the 4.1.2 and not 4.2.2...... Just throwing something up in the air. Take it or bash it. Either way, I still love you guys HAHA!
Sent from my C525c using XDA Premium 4 mobile app
It may be possible that you received an updated radio with 4.2.2?
The radio may not be compatible?
Why not stay on 4.2.2 rom?
!#quote my post if you want to get my attention more quickly
---------- Post added at 03:14 PM ---------- Previous post was at 03:10 PM ----------
Modding.MyMind said:
@russellvone @old.splatterhand
Correct me if I am wrong. Just going on a hunch. Saturn III is based on 4.1.2. @fwaqo is currently on 4.2.2. So would he not need to downgrade in a sense as far as the necessary partitions (images) would be needed in order for this Rom to comply without complications? Mainly, thinking on the matter of the kernel which is found in the boot.img which is technically a build for the 4.1.2 and not 4.2.2...... Just throwing something up in the air. Take it or bash it. Either way, I still love you guys HAHA!
Sent from my C525c using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I've updated(we all have) with OTA and are still able to flash "downgraded" ROMs with out issue, as long as we flash the correct boot.img.
I think it's possible that maybe he received an updated radio that might interfere with the booting process???
!#quote my post if you want to get my attention more quickly
Well, then the solution to the radio would be to grab his previous one from his previous ota and flashed that radio and redue the process...
Sent from my C525c using XDA Premium 4 mobile app
---------- Post added at 05:18 PM ---------- Previous post was at 05:16 PM ----------
If he doesnt have it them I'm sure somebody has to..... I have mine
Sent from my C525c using XDA Premium 4 mobile app
---------- Post added at 05:20 PM ---------- Previous post was at 05:18 PM ----------
russellvone said:
It may be possible that you received an updated radio with 4.2.2?
The radio may not be compatible?
Why not stay on 4.2.2 rom?
!#quote my post if you want to get my attention more quickly
---------- Post added at 03:14 PM ---------- Previous post was at 03:10 PM ----------
I've updated(we all have) with OTA and are still able to flash "downgraded" ROMs with out issue, as long as we flash the correct boot.img.
I think it's possible that maybe he received an updated radio that might interfere with the booting process???
!#quote my post if you want to get my attention more quickly
Click to expand...
Click to collapse
Now that I think about it.... My previous question was illogical since I have done this myself.... Guess work jumbled me up some lol. Oh well. Can't win them all.
Sent from my C525c using XDA Premium 4 mobile app
I flashed back from 4.2.2 to 4.1.2 cause I like the design of 4.1.2 alot more. But I can try if it works with a 4.2.2 custom rom and it's boot.img. Is there any stable rom already?
Related
So I flashed CM7 on my D2G and after the reboot I tried to boot into my clockworkmod recovery to wipe the data so the bootloop would end, but when i hold power/x I get the little android guy with the exclamation point in a triangle above him but when i press the magnifier/search button nothing happens. I know that all I need to do to make the rom work is wipe my data. so how would I go about doing that without having to reflash with sbf and everything? is there a way to fix my clockwork mod? or another way to erase my data?
First, you cannot enter CWM like that.
Power + X takes you to the stock recovery; on 4.5.x, you need to press the volume buttons together to enter it, not the hardware keyboard's Search button.
bschmidy10 said:
So I flashed CM7 on my D2G and after the reboot I tried to boot into my clockworkmod recovery to wipe the data so the bootloop would end, but when i hold power/x I get the little android guy with the exclamation point in a triangle above him but when i press the magnifier/search button nothing happens. I know that all I need to do to make the rom work is wipe my data. so how would I go about doing that without having to reflash with sbf and everything? is there a way to fix my clockwork mod? or another way to erase my data?
Click to expand...
Click to collapse
somethings changed with gingerbread
read the FAQs or Gasai's droid wiki links in my sig
Gasai Yuno said:
First, you cannot enter CWM like that.
Power + X takes you to the stock recovery; on 4.5.x, you need to press the volume buttons together to enter it, not the hardware keyboard's Search button.
Click to expand...
Click to collapse
thank you so much! I know that was a stupid mistake but trying to find that simple mistake on the internet is impossible. thanks again!
sd_shadow said:
somethings changed with gingerbread
read the FAQs or Gasai's droid wiki links in my sig
Click to expand...
Click to collapse
I know that this is anancient thread, but i decided to take a crack at mt D2G today and successfully rooted it and was able to get to the bootstrap recovery, but after installing the cm7 and gapps, the darn thing is just stuck at the red m screen indefinitely. I let it sit there for about 5 min, and to avoid having my battery die, i pulled it and started reading. I really dont wanna sbf it (if i really dont have to) and i need to get to clockwork recovery. Any suggestions?
you need to sbf, see how to use rsd lite in my list
official cm7 is still froyo, use the versions in my list, they work
sd_shadow's list of links for Droid FAQs, SBF, Rooting, ROMs....
Sent from my XT862 using Tapatalk 2
sd_shadow said:
you need to sbf, see how to use rsd lite in my list
official cm7 is still froyo, use the versions in my list, they work
sd_shadow's list of links for Droid FAQs, SBF, Rooting, ROMs....
Sent from my XT862 using Tapatalk 2
Click to expand...
Click to collapse
that was my fear :/ in my impatience, i SBF'd and got it to boot back up just fine, but now im curious as to what i did wrong in my flash... im no noob, i have 7 android phones and theyre all happily rooted with a bevy of rom nands and zips at my disposal to flash whenever i want. Its not rocket science, but the bootstrap thing is just weird to me... i factory reset, wiped caches (a couple times for good measure) and then flashed the rom zip followed by gapps and there i was... stuck at that go..amned red M... what the h-e-double hockey sticks am i doing wrong here??
which cm7 and gaaps, file names please
Sent from my XT862 using Tapatalk 2
---------- Post added at 09:52 AM ---------- Previous post was at 09:46 AM ----------
also which sbf did you use?
sd_shadow said:
which cm7 and gaaps, file names please
Sent from my XT862 using Tapatalk 2
Click to expand...
Click to collapse
CM7 "update-cm-7.1.0-DROIDWE-signed.zip"
and
Gapps "gapps-gb-20110828-signed.zip"
caps used where caps showed on the file names (not sure if that has any bearing whatsoever)
edit: currently downloading a rom called blackice for s--ts and giggles... )
---------- Post added at 04:00 PM ---------- Previous post was at 03:54 PM ----------
i have an OG Evo, a droid incredible (same phone for all intents and purposes), a rezound (that was a pain in thebutt to get s-off on with that stupid wire trick fiasco), a droid incredible 2 (or S, if you will) a sprint S2, sprint S3 (my daily driver) and this D2G, and ive never encountered a recovery quite as "special needs" as what you need to do for motorola devices... this is just so different
---------- Post added at 04:01 PM ---------- Previous post was at 04:00 PM ----------
sd_shadow said:
which cm7 and gaaps, file names please
Sent from my XT862 using Tapatalk 2
---------- Post added at 09:52 AM ---------- Previous post was at 09:46 AM ----------
also which sbf did you use?
Click to expand...
Click to collapse
oh, missed this question sorry
A956_4.5.608_1FF_01.sbf
followed by
BL=2 BOOT REC CDT.sbf
official cm7 is still flashed on froyo kernel, if your phone is on android 2.3.4 you can not go back to froyo kernel
which sbf did you use?
I suggest just using Pooka-CM4D2G-GB-20120519 it is newest cm7 that works on gingerbread kernel
sd_shadow said:
official cm7 is still flashed on froyo kernel, if your phone is on android 2.3.4 you can not go back to froyo kernel
which sbf did you use?
I suggest just using Pooka-CM4D2G-GB-20120519 it is newest cm7 that works on gingerbread kernel
Click to expand...
Click to collapse
oh, missed this question sorry
A956_4.5.608_1FF_01.sbf
followed by
BL=2 BOOT REC CDT.sbf
android version says 2.3.3
system version is 4.5.608.A956
build # 4.5.1_57_D2G-38
youdoofus said:
oh, missed this question sorry
A956_4.5.608_1FF_01.sbf
followed by
BL=2 BOOT REC CDT.sbf
Click to expand...
Click to collapse
that is old method, just use the 4.5.629 sbf, using BL=2 BOOT REC CDT.sbf was just a work around till we got the 629.sbf
1FF-p3_droid2we_cdma_droid2we-user-2.3.4-4.5.1_57_D2GA-59-120117-test-keys-signed-Verizon-US.sbf
sd_shadow said:
that is old method, just use the 4.5.629 sbf, using BL=2 BOOT REC CDT.sbf was just a work around till we got the 629.sbf
1FF-p3_droid2we_cdma_droid2we-user-2.3.4-4.5.1_57_D2GA-59-120117-test-keys-signed-Verizon-US.sbf
Click to expand...
Click to collapse
summuna ***** LOL!!! ok, so i flash that sbf, re-re-re-reroot it and flash away?
after flashing BL=2 BOOT REC CDT.sbf, you need to install the update, because it is unstable rom
or just flash the 629.sbf
---------- Post added at 10:17 AM ---------- Previous post was at 10:13 AM ----------
youdoofus said:
summuna ***** LOL!!! ok, so i flash that sbf, re-re-re-reroot it and flash away?
Click to expand...
Click to collapse
just not the official cm7, and use framaroot app to root
sd_shadow said:
after flashing BL=2 BOOT REC CDT.sbf, you need to install the update, because it is unstable rom
or just flash the 629.sbf
---------- Post added at 10:17 AM ---------- Previous post was at 10:13 AM ----------
just not the official cm7, and use framaroot app to root
Click to expand...
Click to collapse
sounds good and do you have any insight on how to sim unlock this thing without paying one of those sites? the other posts ive read seems kinda fishy "i got 3 codes from 2 different sites and 2 from verizon, none of which worked" :/ sounds odd to me
phone is charging now, ill try this in a lil bit, call me paranoid LoL
---------- Post added at 04:58 PM ---------- Previous post was at 04:33 PM ----------
sd_shadow said:
after flashing BL=2 BOOT REC CDT.sbf, you need to install the update, because it is unstable rom
or just flash the 629.sbf
---------- Post added at 10:17 AM ---------- Previous post was at 10:13 AM ----------
just not the official cm7, and use framaroot app to root
Click to expand...
Click to collapse
worked like a charm!! (since we're both in south dakota) if your license plate starts with a 1, lemme know when i can buy you a beer!
only thing fishy is how verizon/motorola changed the unlock codes, so that some d2gs can not be unlocked, most still can be unlocked, there is atleast 3 different code generating algorithms, you may need to try all 3, but the 1st one works for most
Sent from my XT862 using Tapatalk 2
sd_shadow said:
only thing fishy is how verizon/motorola changed the unlock codes, so that some d2gs can not be unlocked, most still can be unlocked, there is atleast 3 different code generating algorithms, you may need to try all 3, but the 1st one works for most
Sent from my XT862 using Tapatalk 2
Click to expand...
Click to collapse
got and ideas on how to get thos codes without calling vzw and or paying one of those sites?
youdoofus said:
sounds good and do you have any insight on how to sim unlock this thing without paying one of those sites? the other posts ive read seems kinda fishy "i got 3 codes from 2 different sites and 2 from verizon, none of which worked" :/ sounds odd to me
phone is charging now, ill try this in a lil bit, call me paranoid LoL
---------- Post added at 04:58 PM ---------- Previous post was at 04:33 PM ----------
worked like a charm!! (since we're both in south dakota) if your license plate starts with a 1, lemme know when i can buy you a beer!
Click to expand...
Click to collapse
great, yah don't go in to the big city very often, but I'm just a few miles north of Colman
Sent from my XT862 using Tapatalk 2
---------- Post added at 11:15 AM ---------- Previous post was at 11:08 AM ----------
youdoofus said:
got and ideas on how to get thos codes without calling vzw and or paying one of those sites?
Click to expand...
Click to collapse
no, if you want it unocked, and not using verizon, you need to buy a code
I've unlocked 3 different moto devices, but the D2G took the 3rd code
use a site that accepts paypal, and it will be as safe as it gets
sd_shadow said:
great, yah don't go in to the big city very often, but I'm just a few miles north of Colman
Sent from my XT862 using Tapatalk 2
---------- Post added at 11:15 AM ---------- Previous post was at 11:08 AM ----------
no, if you want it unocked, and not using verizon, you need to buy a code
I've unlocked 3 different moto devices, but the D2G took the 3rd code
use a site that accepts paypal, and it will be as safe as it gets
Click to expand...
Click to collapse
word well, im usually found at luckys downtown shooting pool. if/when you hit the big ol city of soo foo, i owe ya! and any ideas about a free set of sim unlock codes?
youdoofus said:
got and ideas on how to get thos codes without calling vzw and or paying one of those sites?
Click to expand...
Click to collapse
all 3 of these should work, if first code does not work, only retry it 1 more time, then request a different code or a refund.
you have a limited number of tries before you get locked out, so don't waste them on a code that doesn't work
mrcellphoneunlocker.com $15.00 email imei after payment [email protected]
http://sim-unlock.net €4.99 EUR or $6.70 USD
e-bay Motorola Unlock Code ,Droid Global 2 A956 Approximately US $3.90
I was running CM10 and reboot to recovery to flash latest and now I see:
Yellow Triangle with exclamation point.
System software not authorized by Verizon Wireless has been found on your found.
Please turn off your phone and go to nearest Verizon Wireless store for help.
Any suggestions would be GREATLY appreciated!
Anthony
awmobjects said:
I was running CM10 and reboot to recovery to flash latest and now I see:
Yellow Triangle with exclamation point.
System software not authorized by Verizon Wireless has been found on your found.
Please turn off your phone and go to nearest Verizon Wireless store for help.
Any suggestions would be GREATLY appreciated!
Anthony
Click to expand...
Click to collapse
Well I Odin'd stock.vzw_root66...waiting now for it to finish.
awmobjects said:
Well I Odin'd stock.vzw_root66...waiting now for it to finish.
Click to expand...
Click to collapse
It rebooted and stuck for over 5 minutes....I stopped and now repeating the Odin.
Looks like you got it figured out. They call that a soft brick. It happened to me.
its called not unlocking your bootloader before flashing custom firmware on your device. my suggestion is to read the guides stickied around here before your soft brick turns into a hard brick!
Are you saying that the Rom runs ok but when you goto recovery you get the triangle? i was reading something about how the stock recovery can be re flashed by accident in some situation, try odin recovery again?
jmclaren7 said:
Are you saying that the Rom runs ok but when you goto recovery you get the triangle? i was reading something about how the stock recovery can be re flashed by accident in some situation, try odin recovery again?
Click to expand...
Click to collapse
Nope. What he did is exactly what droidstyle said. He didn't unlock his bootloader which is the first step you should take after rooting your phone if you are going to be playing with any ROMs.
Brian Gove said:
Nope. What he did is exactly what droidstyle said. He didn't unlock his bootloader which is the first step you should take after rooting your phone if you are going to be playing with any ROMs.
Click to expand...
Click to collapse
I think he had to have his bootloader unlocked to flash the Rom in the first place. My guess would be that he relocked it at some point.
Sent from my SCH-I535 using xda premium
HHF2 said:
I think he had to have his bootloader unlocked to flash the Rom in the first place. My guess would be that he relocked it at some point.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
its a possibility, but the point is the bootloader was locked when updating.
HHF2 said:
I think he had to have his bootloader unlocked to flash the Rom in the first place. My guess would be that he relocked it at some point.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
If CM10 is anything like Synergy it does a check for the bootloader being unlocked and if it is locked still it skips installing the kernel. The rest of it goes along fine.
Brian Gove said:
If CM10 is anything like Synergy it does a check for the bootloader being unlocked and if it is locked still it skips installing the kernel. The rest of it goes along fine.
Click to expand...
Click to collapse
That is exclusive to Synergy. You can thank Eschelon for that..
Sent from my SCH-I535 using xda premium
---------- Post added at 04:38 PM ---------- Previous post was at 04:35 PM ----------
Be careful. The Ez unlock app on the market is not working properly. It will unlock you but it wont stick. Revert to version 1.2 until 1.3 and 1.4 are fixed. He has posted a link under the app description to 1.2.
Sent from my SCH-I535 using xda premium
drbveb88 said:
That is exclusive to Synergy. You can thank Eschelon for that..
Sent from my SCH-I535 using xda premium
---------- Post added at 04:38 PM ---------- Previous post was at 04:35 PM ----------
Be careful. The Ez unlock app on the market is not working properly. It will unlock you but it wont stick. Revert to version 1.2 until 1.3 and 1.4 are fixed. He has posted a link under the app description to 1.2.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
this is also noted in my guide
how do i get un soft brick it than i stuck in this to.....
MLGxHEMANx said:
how do i get un soft brick it than i stuck in this to.....
Click to expand...
Click to collapse
Section 6 of my guide.
what happens if it does work ???
---------- Post added at 02:28 PM ---------- Previous post was at 01:50 PM ----------
ok so it worked and thank you so much for the help but i want to know how to just root my phone and tweak my opts. u have a step by step let me know i do have the samsung galaxy s3
MLGxHEMANx said:
what happens if it does work ???
---------- Post added at 02:28 PM ---------- Previous post was at 01:50 PM ----------
ok so it worked and thank you so much for the help but i want to know how to just root my phone and tweak my opts. u have a step by step let me know i do have the samsung galaxy s3
Click to expand...
Click to collapse
Section2 of my guide.
droidstyle said:
Section2 of my guide.
Click to expand...
Click to collapse
Man. Don't they teach these kids how to read these days. You can lead them to water but can't get them to drink. :laugh:
softbrick Note 2
fearjego said:
Looks like you got it figured out. They call that a soft brick. It happened to me.
Click to expand...
Click to collapse
Okay I am a NUBE. I ran casual and then odin everything worked good. ThenI started getting errors when i was opening apps. So I was going to go back to stock. I ran oden again, this time using the bootloaderbaseline.tar 1,030K file. Now I am getting system software not authorized by verizon wireless found on your phone.
Now when I hook up to the usb cable it will not recognize to try and reload the bootloader.
any suggestions... Thanks again.
Try the Note 2 forums here: http://forum.xda-developers.com/forumdisplay.php?f=1886, they will probably be a lot more helpful. This is the Verizon Galaxy S3 forum.
Hi there. Recently my shift has been amazingly slow. In areas that I used to be able to download at very fast speeds, I'm getting 6.1 kB/s. That's not reasonable, especially because I use my phone heavily. I researched this problem and saw that it may be a problem with my radio being old. Could anyone refer me to a guide to flashing radios? And will the radios be compatible with my rom? I'm running CM7.2 RC3. Thank you in advance.
Sent from my PG06100 using XDA
sahilprasad said:
Hi there. Recently my shift has been amazingly slow. In areas that I used to be able to download at very fast speeds, I'm getting 6.1 kB/s. That's not reasonable, especially because I use my phone heavily. I researched this problem and saw that it may be a problem with my radio being old. Could anyone refer me to a guide to flashing radios? And will the radios be compatible with my rom? I'm running CM7.2 RC3. Thank you in advance.
Sent from my PG06100 using XDA
Click to expand...
Click to collapse
Run the 2.77.651.3 RUU, then root using Indirect's script and flash your CM7 rom.
RUU's: http://forum.xda-developers.com/showthread.php?t=1335068
Indirects root method: http://forum.xda-developers.com/showthread.php?t=1558532
Don't bother running the 2.77.651.8 RUU because the radio's are the same, they only patched an exploit in that one
Sent from my PG06100 using xda premium
CNexus said:
Run the 2.77.651.3 RUU, then root using Indirect's script and flash your CM7 rom.
RUU's: http://forum.xda-developers.com/showthread.php?t=1335068
Indirects root method: http://forum.xda-developers.com/showthread.php?t=1558532
Don't bother running the 2.77.651.8 RUU because the radio's are the same, they only patched an exploit in that one
Sent from my PG06100 using xda premium
Click to expand...
Click to collapse
That's a ton of work for a radio. The shifts radios aren't tied to your hboot so just extracting the radio and making a PGzip and flashing it in bootloader makes the most since if your s-off.. It's dangerous like anything flashed from bootloader but that should be common sense to any rooted user.
IF YOU DO THIS, DO SO AT YOUR OWN RISK,AND DONT BLAME ME FOR BRICKS.understand what your doing before you do it
Sent from a KangBanged JellyBean
strapped365 said:
That's a ton of work for a radio. The shifts radios aren't tied to your hboot so just extracting the radio and making a PGzip and flashing it in bootloader makes the most since if your s-off.. It's dangerous like anything flashed from bootloader but that should be common sense to any rooted user.
IF YOU DO THIS, DO SO AT YOUR OWN RISK,AND DONT BLAME ME FOR BRICKS.understand what your doing before you do it
Sent from a KangBanged JellyBean
Click to expand...
Click to collapse
Yeah I realized that there is a much easier way to do it...theres a rooted version of the 2.77.651.8 update floating around somewhere, just get that zip, rename to PG06IMG.zip and put it on the root of your sdcard (then reboot to bootloader to install). When it's done installing just reboot, then boot into recovery and flash your CM7 rom again.
EDIT: The rooted stock is HERE
Thank you for the help. But also, what are the things that can go wrong? It's my first time flashing a radio and I do not want to brick my phone at any cost.
Sent from my PG06100 using XDA
Removed
strapped365 said:
Okay to get the radio don't use my posted ota.
Your going to need the RUU.exeand windows and once it's downloaded open it up, but don't touch anything open run from start menu and type %temp% and it will open a window with the temp location of the RUU. Grab ROM.zip and drag it to your desktop and close the window and RUU. Inside ROM.zip is the radio hboot system.img boot.img ect. Thats where i would get the radio. Then make your PGzip and flash from bootloader. The risk of bricking is when you flash a radio not meant for your device or if it's corrupt so be careful and read read and read to be sure of of what your doing
Sent from a KangBanged JellyBean
Click to expand...
Click to collapse
Why is it that he can't get the radio by flashing the rooted stock?
Sent from my speed-y
CNexus said:
Why is it that he can't get the radio by flashing the rooted stock?
Sent from my speed-y
Click to expand...
Click to collapse
Because 1 its not in the ROM and 2 radios are not flashed at recovery level
Sent from a KangBanged JellyBean
strapped365 said:
Because 1 its not in the ROM and 2 radios are not flashed at recovery level
Sent from a KangBanged JellyBean
Click to expand...
Click to collapse
Ah ok, I didn't actually download it and see myself, but I was suggesting that he install it through the bootloader by making a PG06IMG, not through recovery btw.
I don't know what the actual format of the rooted stock you posted is, but I probably should have checked.
Sent from my speed-y
Um aren't the actual radios posted here in the Shift forum? Or are they 404'd? Cuz I got em if somebody really needs em.
---------- Post added at 09:15 AM ---------- Previous post was at 09:13 AM ----------
http://forum.xda-developers.com/showthread.php?t=1479533 here they are
Removed
bilgerryan said:
Um aren't the actual radios posted here in the Shift forum? Or are they 404'd? Cuz I got em if somebody really needs em.
---------- Post added at 09:15 AM ---------- Previous post was at 09:13 AM ----------
http://forum.xda-developers.com/showthread.php?t=1479533 here they are
Click to expand...
Click to collapse
I was considering just flashing the radio as shown by VICODAN on that post of his. Will that be okay? It's annoying dealing with this amazingly slow connection.
sahilprasad said:
I was considering just flashing the radio as shown by VICODAN on that post of his. Will that be okay? It's annoying dealing with this amazingly slow connection.
Click to expand...
Click to collapse
Yep, just follow the instructions
bilgerryan said:
Yep, just follow the instructions
Click to expand...
Click to collapse
Aww man beat me to it, I was waiting for my internet connection to start up.
Sent from my speed-y
Finally! Got it working. Had problems with adb not recognizing my device. Fixed that with driver updates with htc sync. Then pushed PGO6IMG.zip from adb and rebooted bootloader, applied update, and hello 500 kB/s. Thank you to all of you. Question answered.
sahilprasad said:
Finally! Got it working. Had problems with adb not recognizing my device. Fixed that with driver updates with htc sync. Then pushed PGO6IMG.zip from adb and rebooted bootloader, applied update, and hello 500 kB/s. Thank you to all of you. Question answered.
Click to expand...
Click to collapse
No problem, glad you got it working. I know what it's like to have crappy data speeds... I lived somewhere for 3 months where I only got 2G lol
---------- Post added at 08:23 AM ---------- Previous post was at 08:18 AM ----------
And then I left AT&T lol
hi,
I just rooted my HOX, and installed cynagenmod 10.1 , i unlocked the boot loader and install the custom rom through CWM as given on the internet everywhere , but when i try to run titanium backup it says not properly rooted, and when i checked from a root checker it says DEVICE NOT PROPER ROOT ACCESS, i read some where and download the SU bin and arm file and flashed them through CWM in recovery mode , and also flashed the bin first and then the other other file , but when i run TB it gives the same error.
Please help
Thanks in advance
Are you sure that it's CM10.1? Try enabling developer settings by going into about and tapping build number a bunch of times. I've never heard of this before.
Sent from my evita
---------- Post added at 07:00 PM ---------- Previous post was at 07:00 PM ----------
And FYI, questions go in q&a.
Sent from my evita
Try flashing with TWRP instead, I've heard CWM has had problems in the past.
Desertman123 said:
Try flashing with TWRP instead, I've heard CWM has had problems in the past.
Click to expand...
Click to collapse
Fwiw cwm was properly ported not too long ago
Sent from my Nexus 4 using xda app-developers app
RollTribe said:
Are you sure that it's CM10.1? Try enabling developer settings by going into about and tapping build number a bunch of times. I've never heard of this before.
Sent from my evita
---------- Post added at 07:00 PM ---------- Previous post was at 07:00 PM ----------
And FYI, questions go in q&a.
Sent from my evita
Click to expand...
Click to collapse
Yes its cynagenmod mod 10.1.2-endeavoru stable, and i did go into developers setting it says development setting already enabled
should i re-root it how can i do this?
PS- sorry new to blogging dint know dat,
hellzangel said:
Yes its cynagenmod mod 10.1.2-endeavoru stable, and i did go into developers setting it says development setting already enabled
should i re-root it how can i do this?
PS- sorry new to blogging dint know dat,
Click to expand...
Click to collapse
If you have the Endeavor you're in the wrong forum, this is the Evita (One XL) forum.
Sent from my Evita
Desertman123 said:
Try flashing with TWRP instead, I've heard CWM has had problems in the past.
Click to expand...
Click to collapse
how should i do it , should i go into recovery mode and flash a zip , and if flash TWRP what will happen to my backup of htc`s stock rom i have in CWM,
Forget any advice you've been given in this thread. Like I said, you're in the wrong forum and need to go to the correct forum for your device.
Sent from my Evita
Desertman123 said:
Try flashing with TWRP instead, I've heard CWM has had problems in the past.
Click to expand...
Click to collapse
Well its solved now the device is rooted properly, i flashed it with TWRP and it works fine now. thnks
My G2 sometimes takes a long time to send texts. It isn't AT&T related since my nexus 5 has no issue. I don't think it's ROM related since it does it across all ROMs. However, I don't know if it does it on stock ROM. I don't think it does though. It's been a while since I've been on it.
Any ideas? APN? LTE? modem?
Sent from my LG-D800 using XDA Free mobile app
+1
There's a patched modem in the at&t development thread that works wonders. I'm using it now.
countryfolk07 said:
There's a patched modem in the at&t development thread that works wonders. I'm using it now.
Click to expand...
Click to collapse
I tried to flash but it doesnt change baseband
south956 said:
I tried to flash but it doesnt change baseband
Click to expand...
Click to collapse
I didn't have any issues. Mine changed. I used Philz recovery though. I just made sure I verified the md5 with a file explorer.
Ill try with philz and report back
What rom and kernel are you using?
---------- Post added at 03:40 PM ---------- Previous post was at 03:25 PM ----------
No avail
south956 said:
Ill try with philz and report back
What rom and kernel are you using?
---------- Post added at 03:40 PM ---------- Previous post was at 03:25 PM ----------
No avail
Click to expand...
Click to collapse
I'm sorry then. I don't know. I am on stock 20k. Dori kernel right now. But was on stock kernel when I flashed.
Oh.....im on cloudyg3 with dori kernel too
Ive used this same patch that was mentioned earlier in the post...im on stock rooted 20k and it works awesome. Not sure if the new 20y fixes the problem....but guess we'll have to wait and see if someone can make a flashable version.
N12X93R said:
My G2 sometimes takes a long time to send texts. It isn't AT&T related since my nexus 5 has no issue. I don't think it's ROM related since it does it across all ROMs. However, I don't know if it does it on stock ROM. I don't think it does though. It's been a while since I've been on it.
Any ideas? APN? LTE? modem?
Sent from my LG-D800 using XDA Free mobile app
Click to expand...
Click to collapse
Contrary to what you believe, it IS AT&T.
I have had a number of phones that all behaved the same way on AT&T's network.
Some pages come pretty quickly, and others take up to an hour to show up.
Friends on Sprint or Verizon have no such issue, generally.