ANSWER:
The Moto G has Miracast support from the hardware, but it is disabled by default on 4.3. If you want to enable it you need to modify this build.prop: persist.debug.wfd.enable=1
With the 4.4.2 update it is enabled by default.
Original question:
Hello,
Do you guys see any hardware related reasoning behind the wireless display option missing from the Moto G?
Wifi direct is working perfectly and I don't see why is that piece of software is missing.
/M
Hm.. good one.
Most probably because of the low price. "Want this? Try Moto X"
...if you're living in the EU.
Blablabla Tapatalk 4 blablabla Desire C
It's possible under the KitKat update, the option is restored according to a screengrab on another thread.
techguyone said:
It's possible under the KitKat update, the option is restored according to a screengrab on another thread.
Click to expand...
Click to collapse
since then I found, that it is possible to enable the option through modifying the build props even on 4.3. Do you know if you have seen it on stock 4.4.2?
Sent from my XT1032 using xda app-developers app
Infusion ROM from till as has miracast enabled and it works, according to till as its a software thing and not hardware. So it may help to check there or use the ROM.
Sent from my Nexus 7 using xda app-developers app
Already been verified the standard kitkat release has it enabled
Sent from my Moto G using XDA premium 4 mobile app
Build.prop needs to be modified to enable screen mirroring. It is a small change in one line from 0 to 1
persist.debug.wfd.enable=1
Reboot and there should be an option for screen share in settings.
newuser25 said:
Build.prop needs to be modified to enable screen mirroring. It is a small change in one line from 0 to 1
persist.debug.wfd.enable=1
Reboot and there should be an option for screen share in settings.
Click to expand...
Click to collapse
next time please read the thread before posting an answer that is already been stated multiple times.
Sent from my phone
Miracast
Has anyone managed to get Miracast working using a PTV3000 (push2tv) Netgear device with the Moto G after this amendment?
Would really appreciate any feedback on this.
eilz said:
Has anyone managed to get Miracast working using a PTV3000 (push2tv) Netgear device with the Moto G after this amendment?
Would really appreciate any feedback on this.
Click to expand...
Click to collapse
Even on kitkat, when it's already enabled by default, miracast is not working.
Sent from my phone
miklosbard said:
Even on kitkat, when it's already enabled by default, miracast is not working.
Sent from my phone
Click to expand...
Click to collapse
Does anyone know around this situation??
So i have 4.4.2 Kitkat on my retail (phones4u) Moto G , bu there is no wireless display option ?
I notice it was before the update that people were saying its included in KK , but i have not seen anyone since confirm this.
Should this option be available now , and if so any ideas why i dont have it ?
Thanks
solowkey said:
So i have 4.4.2 Kitkat on my retail (phones4u) Moto G , bu there is no wireless display option ?
I notice it was before the update that people were saying its included in KK , but i have not seen anyone since confirm this.
Should this option be available now , and if so any ideas why i dont have it ?
Thanks
Click to expand...
Click to collapse
it is there, but missing the part where you can enable it. settings/display/cast screen
there should be a menu button (which is missing) where you could switch it on
Sent from my phone
miklosbard said:
it is there, but missing the part where you can enable it. settings/display/cast screen
there should be a menu button (which is missing) where you could switch it on
Sent from my phone
Click to expand...
Click to collapse
Yeah i got that , but from what i read the 4.4.2 update enabled to the button, not on mine : (
Thanks
I have this Miracast dongle: http://www.ebay.com/itm/WIFI-Displa...-AirPlay-Wireless-TV-Share-NEW-/380780733199?
My phone does make a connection to the dongle with Wifi direct (see pic). Also under Wifi settings --> Wifi direct it lists the connection as active. According to the manual of the dongle, when it says 'Ready to display', it should start the screen casting. Unfortunately it doesn't. It also doesn't show anything under display --> cast screen.
Everything seems to be in place with the connection. I'm wondering whether our devices miss the supporting hardware, or that it's just a disabled setting by Motorola to not cannibalize on the Moto X.
Up for this
I was looking for Miracast dongle for my TV to link it with the G, because of the cast option after kk update...
But now i m not sure at all that the G can do it :silly:
can you please share your experiences with Moto g cast?
OTA_ said:
Up for this
I was looking for Miracast dongle for my TV to link it with the G, because of the cast option after kk update...
But now i m not sure at all that the G can do it :silly:
can you please share your experiences with Moto g cast?
Click to expand...
Click to collapse
On latest kitkat, with root I was able to change the for mentioned build property, then I was able to enable wireless display and LG 660s TV showed up and I was able to duplicate my scree with around half a second lag perfectly. Afterwards however I was not able to reconnect, somehow it tries to connect multiple times and kills the previous connection. I read somewhere that it's the TV's fault, but I cannot be sure until I try out with an other one
Sent from my phone
miklosbard said:
On latest kitkat, with root I was able to change the for mentioned build property, then I was able to enable wireless display and LG 660s TV showed up and I was able to duplicate my scree with around half a second lag perfectly. Afterwards however I was not able to reconnect, somehow it tries to connect multiple times and kills the previous connection. I read somewhere that it's the TV's fault, but I cannot be sure until I try out with an other one
Sent from my phone
Click to expand...
Click to collapse
Could you mention what you changed exactly? I'm willing to try too
Sent from my XT1032 using XDA premium app
Don't forget to hit thanks if I helped!
persist.debug.wfd.enable 0 -> 1
Related
Hi All,
Has anyone got cast screen working? (CM11S 4th July update)
It doesn't pick up anything in the list even thought my LG TV has miracast enabled??
Even tried WiFi Direct but no options on phone just one Android_a2e4 device which is not mine or neighbours and options are disabled at the bottom.
So has anyone got it working?
Al.
*SOLVED: did cache clear& reboot started working. Must of been left over crap from update.
Sent from my One using XDA Free mobile app
Hey guys. I'm "new" here on xda. I've been using this website from the shadows for years, but today I just can't solve this problem by myself.
The thing is, I owned a Moto G 2013 (16Gb) 2 years ago. Stock 4.4.4 KK, no problem at all. And I decided to OTA update it to LP 5.1.1, and after that, apply the NX ROM. Everything works just fine, not a single problem.... until my brother got a Moto G 4G LTE (1st gen) this Christmas.
He was 4.4.4 stock. The phone was from GB (not our country), Tesco version and it said it had no update to Lollipop, so I updated it with TWRP with original OTA firmware. Everything, again, okey (strangely, there is no 5.1.1 update available, anyone correct me if I'm wrong).
THE PROBLEM starts when we both use our phones at home, over the same WiFi network. If I have WiFi ON, and he doesn't, my phone internet is working. But if we both have the WiFi ON, randomly, one of the two will have working internet and the other will not.
I thought it's our ROMs the problem. I reverted to stock, recoveries, firmwares, radios, EVERYTHING. I got crazy finding a solution (I searched for solutions on Google in 3 languages). And right now, I just have the two phones, one next to the other, doing a web searching comparison, and as said:
- imagine my Moto G is "A" and his Moto G is "B"
- "A" and "B" with WiFi on
- Searching for Youtube with Google Chrome app
- "A" works, "B doesn't"
- I turn off "A" WiFi, and instantly, "B" internet is working again
This drives me crazy, because we live in the same house, single router. We have a 50Mb real WiFi connection, set at Auto channel, channel width and 11bgn mixed mode. I tried using fixed channel, 20Mhz width channel, only 11n... nothing works.
We have other devices, a Samsung, a Sony and 4 PCs, and everybody has good internet, except our Moto G's when used at the same time. We have no neighbourgs (the only network in 50 meters is ours) so no channel fload from other WiFi signals.
I'm sorry for the wall text, but it just pisses me off that I have tried it everything, for almost a week, and no solution.
Thanks in advance!
Could this be a MAC address collision? Can you see both phones on the router?
_that said:
Could this be a MAC address collision? Can you see both phones on the router?
Click to expand...
Click to collapse
Sorry for the delay answer. I think I need to configure the xda notifications thing...
And mate, you are bloody right. The problem was so visible and simple, that I couldn't even think about it. Indeed, both phones have the same MAC adress. How is that even possible? Both phones are from different countries, and I never messed up with the WiFi settings... Strange.
Now that I know where resides the problem... how do I change the MAC adress? I know it has something to do with the "persist" folder, but don't know how to properly change it. I use ES File Manager PRO, and root explorer is set to r/w so it's all ready.
Thanks for the fast reply mate, I already have half the problem solved :fingers-crossed:
Cheers!
wolfender said:
Indeed, both phones have the same MAC adress. How is that even possible?
Click to expand...
Click to collapse
Did you ever mess with the "persist" partition?
wolfender said:
Now that I know where resides the problem... how do I change the MAC adress? I know it has something to do with the "persist" folder, but don't know how to properly change it.
Click to expand...
Click to collapse
I found this:
http://forum.xda-developers.com/showpost.php?p=62352414&postcount=11
_that said:
Did you ever mess with the "persist" partition?
Only in my Moto G, but that was way before he got his phone. And the only thing I did was delete the folder and put the one from Lollipop (had the 4.4.4 one, and wifi wasn't working after ROM install).
I found this:
http://forum.xda-developers.com/showpost.php?p=62352414&postcount=11
Click to expand...
Click to collapse
That pretty much solved my problem! I used Notpad ++ and modified the file on the PC, as apps from PlayStore with hex editing couldn't detect the "persist" folder for some weird unknown reason.
But if anyone gets to read this post, you only have to change by 1 ONLY the last number. If your MAC adress ends in "e6", change it to "e7" and so on (4 times as in the file). The rest let it unchecked.
Thanks again mate. WiFi working properly, as it should. Made a quick test and no WiFi drop. You rock! :good:
Does u guys have problem connecting with smart view, i cant mirror my s7e to my sony bravia all my other android phones can screen mirroring only s7e faild to connect
Thnx and sorry for my english
p1xarro said:
Does u guys have problem connecting with smart view, i cant mirror my s7e to my sony bravia all my other android phones can screen mirroring only s7e faild to connect
Thnx and sorry for my english
Click to expand...
Click to collapse
I'm not sure, could be a software bug of some sort.. You'll just have to wait and see if an update fixes it. Or your Bravia may be too old to connect to such a new phone, who knows..
I was playing with this yesterday on my Samsung Smart TV. If I selected screen mirroring on the TV nothing would happen. The s7 showed that I was connected to the TV and on the TV I could select media in source options to look at pics and home video. I found that with smart view app on s7 when I selected a movie to watch it automatically was displayed on the TV. Haven't tried mirroring games yet or just the home screen but that might need a different app than smart view. Hope this helps a bit
Sent from my SM-G930W8 using XDA-Developers mobile app
TheSproker said:
I'm not sure, could be a software bug of some sort.. You'll just have to wait and see if an update fixes it. Or your Bravia may be too old to connect to such a new phone, who knows..
Click to expand...
Click to collapse
:/ my bravia is k85c 4k i think the problem is software i have traying to flash costum rom but still the same
Thnks guys
Sent from my SM-G935F using Tapatalk
Same here.SM-G930F.Iam in stock rom rooted.The thruth i havent test it before the root(i did the manualy rooting sequense so i had to do formata data) so my phone dosent have the first update.Now when i select the quick launche smart view icon , the phone searchs and find the tv i tap to connect the tv is going black(its going to connect) and then my phone kick me out and a pop up appears sayin '' Failed to enable smart view.Error occurred''.
But when i use the smart view app i can see all the photos and videos.The mirroring thouth isnt working.I tried to safe mode still nothing.Any ideas?
Same happens to me but if iI go in the TV settings and enable the wifi, the wifi direct and then I connect from the s7.. It works!
~Alex~ said:
Same here.SM-G930F.Iam in stock rom rooted.The thruth i havent test it before the root(i did the manualy rooting sequense so i had to do formata data) so my phone dosent have the first update.Now when i select the quick launche smart view icon , the phone searchs and find the tv i tap to connect the tv is going black(its going to connect) and then my phone kick me out and a pop up appears sayin '' Failed to enable smart view.Error occurred''.
But when i use the smart view app i can see all the photos and videos.The mirroring thouth isnt working.I tried to safe mode still nothing.Any ideas?
Click to expand...
Click to collapse
same thing happens to me. screen mirroring used to work. but i cant remember if it was before rooting or after. can it be the problem? still stock rom though
i think that it is a bug
i solved it. since i got my first android phone s2 and then s3 i experienced the same problem because i always rooted my phones. i also rooted my 27 and lost the screen mirroring and other features. then today i flashed the stock original firmware and everything is normal now. this bug, losing screen mirroring feature after rooting, is a big time problem that nobody can solve. if you need help you can check out this link as i did. you have to unroot it if you want to use those feature.
http://galaxys7root.com/galaxy-s7-s7-edge-root/how-to-unroot-galaxy-s7-or-s7-edge-with-stock-firmware/
There is another way to solve this issue with Root:
https://www.youtube.com/watch?v=A0JqRf6sygM
(dont be irritated by the error message in this video ... it is working withe the "Failed to enable smart view. Error occured." message)
I tested it an a rooted 930F with custom recovery (didn't affect this but just wanted to mention) and the "Failed to enable smart view. Error occured." message . You can make smart view working again by adding the following line to the build.prop file:
Code:
wlan.wfd.hdcp=disable
After adding this quick connect and smart view (basicly the same) are working like charm.
I hope I could help other people with this solution ... despite this thread is a little old.
SpiGAndromeda said:
There is another way to solve this issue with Root:
https://www.youtube.com/watch?v=A0JqRf6sygM
(dont be irritated by the error message in this video ... it is working withe the "Failed to enable smart view. Error occured." message)
I tested it an a rooted 930F with custom recovery (didn't affect this but just wanted to mention) and the "Failed to enable smart view. Error occured." message . You can make smart view working again by adding the following line to the build.prop file:
Code:
wlan.wfd.hdcp=disable
After adding this quick connect and smart view (basicly the same) are working like charm.
I hope I could help other people with this solution ... despite this thread is a little old.
Click to expand...
Click to collapse
Thank You,it worked!
Work with my s7 exynos rooted and my TV LG. Ty
Thank you! ES wouldnt let me save the edit so I used Root Browser insted. Probably don't have it on the proper settings though.
Sent from my SM-T810 using Tapatalk
Thank you
SpiGAndromeda said:
There is another way to solve this issue with Root:
I tested it an a rooted 930F with custom recovery (didn't affect this but just wanted to mention) and the "Failed to enable smart view. Error occured." message . You can make smart view working again by adding the following line to the build.prop file:
Code:
wlan.wfd.hdcp=disable
After adding this quick connect and smart view (basicly the same) are working like charm.
I hope I could help other people with this solution ... despite this thread is a little old.
Click to expand...
Click to collapse
Thanks a million! It worked like a charm
(Using Samsung Galaxy S6 edge - SM-G925F with stock rooted firmware)
This technology is a joke. It has so many bugs. Samsung is falling apart. Their latest phones and televisions are overpriced garbage. Although, it's difficult to find a tech-company that isn't full of **** these days. What happened, Samsung?? Why doesn't any of your stuff work anymore? Bait & switch?
---------- Post added at 12:42 AM ---------- Previous post was at 12:35 AM ----------
Why does smart view only seem to work sporadically at best? I've got a brand new Samsung 8 series TV and a brand new Samsung S7. I can't say I'd recommend either device. Both were overpriced. Neither does what they said they'd do. Samsung doesn't seem to care. No help available.
I didn't root my S7 but I can't mirror the screen, just happen just one day and didn't work any more. Any idea? I have the rom stock from britain version with Android 7.0
Thanks for this fixing...
What about TV to Phone issue?
Is there anybody tried?
Problems with Smart View
Hi everyone, I have a problem with my Note 5, recently update to Nougat and smart view and It stopped working.
I tried to
"Code:
wlan.wfd.hdcp=disable"
But nothing
I Hope someone can help me
Model SM-N920P
Android Nougat 7.0
ROM Moar 1.2
Note: I´m sorry my english
kpatty2001 said:
Hi everyone, I have a problem with my Note 5, recently update to Nougat and smart view and It stopped working.
I tried to
"Code:
wlan.wfd.hdcp=disable"
But nothing
I Hope someone can help me
Model SM-N920P
Android Nougat 7.0
ROM Moar 1.2
Note: I´m sorry my english
Click to expand...
Click to collapse
I know this is a few months old but make sure you reboot after editing the build.prop file. Did it yesterday and it worked fine.
Hi,
I'm bumping this old thread again as I haven't found a definite answer. I still have my S7 SM-G930F on stock MM/TW because I refuse to lose smartview functionality which works perfectly with my Samsung UN55H6350 on WiDi, (no Wifi needed). From what I have researched, Nougat update broke Smartview. Because It's reportedly never functioned the same since then, I have the below questions:
Does Smartview WiDi work on stock rooted MM/TW? WiDi functionality is essential to me. I stream phone content to my TV without WiFi most of the time. This is a deal breaker for me.
Does Smartview WiDi work on stock rooted Nougat/TW?
Are there any MM or Nougat Custom Roms where Smartview works over WiDi?
Thanks for reading, LMK if anything is unclear.
I received my 360 cam yesterday and updated/installed the software for it but I still can't get it to work. The app opens fine and will connect to the camera but will either say it is unavailable or will display the image from the camera before closing and going to the home screen and saying it's unavailable. It also won't recognise the micro as card I put in that works perfectly with every other device I have used it in.
eremeya said:
I received my 360 cam yesterday and updated/installed the software for it but I still can't get it to work. The app opens fine and will connect to the camera but will either say it is unavailable or will display the image from the camera before closing and going to the home screen and saying it's unavailable. It also won't recognise the micro as card I put in that works perfectly with every other device I have used it in.
Click to expand...
Click to collapse
Had these same problems with mine. Oddly enough fixed it completely when I uninstalled my VPN adblocking app... disabled the adblocking didn't work, but uninstalling did. Very strange.
This camera still sucks though as far as I can tell. Apparently it's not compatible with Google Cardboard... like.. seriously? I haven't found any way to view 360 degree videos in a side-by-side manner to support Cardboard. Your options are apparently just moving the phone around in a non-VR fashion, or buy LG's own headset....?
Octoxan said:
Had these same problems with mine. Oddly enough fixed it completely when I uninstalled my VPN adblocking app... disabled the adblocking didn't work, but uninstalling did. Very strange.
This camera still sucks though as far as I can tell. Apparently it's not compatible with Google Cardboard... like.. seriously? I haven't found any way to view 360 degree videos in a side-by-side manner to support Cardboard. Your options are apparently just moving the phone around in a non-VR fashion, or buy LG's own headset....?
Click to expand...
Click to collapse
Phone connects to device (Bluetooth for initial connection, then WiFi direct). Makes sense that VPNs would cause issues
Anyways, the workflow is kinda weird... if you mount the camera/SD card and download the raw video, the Raw video consists of two circles with no optical corrections(black borders around the two circles)
See photo under #1 for an example: http://mediashift.org/2016/05/6-things-i-learned-about-shooting-360-videos/
If you download the video through the app/WiFi correction(very slowly, 1MB/s), you get a optically corrected/merged video (no black bars)
First screenshot in link below
https://havecamerawilltravel.com/photographer/360-video-ricoh-theta-facebook
Video #2 plays properly with the lg app(and other cardboard apps). Video #1 doesn't...
So this means I need to download videos from device very slowly (to get the optically corrected video) instead of dumping the raw video via microsd/cable, to watch it on my phone, or postprocess on my computer
Thanks for the replys. I am using ad blocking so I play around with it in the morning.
The more I understand about LGs "friends" implementation the more I feel like they have set themselves up for a failure.
It seems like using Bluetooth or even a direct usb connection would have been a much better way to go instead of Wi-Fi for the 360 cam. Not being a programmer though I'm not sure if it would even be feasible to use a connection other than Wi-Fi.
eremeya said:
Thanks for the replys. I am using ad blocking so I play around with it in the morning.
The more I understand about LGs "friends" implementation the more I feel like they have set themselves up for a failure.
It seems like using Bluetooth or even a direct usb connection would have been a much better way to go instead of Wi-Fi for the 360 cam. Not being a programmer though I'm not sure if it would even be feasible to use a connection other than Wi-Fi.
Click to expand...
Click to collapse
Yeah mine disconnects constantly over Wi-Fi. Seems to be no range on it, so you're force to be in every scene. Not being a very good friend.
is the LG 360 cam compatible with the Galaxy Note 3? I have heard of incompatibility issues with other phones making me hesitant to get one
valtervincere said:
is the LG 360 cam compatible with the Galaxy Note 3? I have heard of incompatibility issues with other phones making me hesitant to get one
Click to expand...
Click to collapse
It should we compatible with any Android Phone running Lollipop or higher (5.0), but I haven't tested it specifically with the Note 3.
LG 360 Camera Connection Problem Fixed
I had the same problem, not being able to connect to my 360 camera.
Here's the solution.
Turn the camera on, do not open the camera manager.
go to wifi on your phone.
look for LG camera wifi.....
if it is already familiar with it, press forget network.
press on the network name again and try to connect, it will prompt you for a password.
the password should be 00 followed by the last 6 digits of the serial no of the CAM
it should connect
open the camera manager again and everything should be fine
I was about to give up before seeine this advice. Going to try it shortly. Hope it solves the problem.
Thank you.
I wonder whether you know about this problem.
LG 360 Cam suddenly shut down after I switched on the power button every time.. sigh... Kindly help as it is only about 6 months old...
My LG 360 wi-fi does not even become visible. I can see its bluetooth but it won't pair. The LG 360 Cam Manager app cannot connect to the camera either.
I'm running the latest firmware and have the latest version of LG Bridge. I've also reset the 360 cam a number of times but not luck. It's basically a paperweight at the moment. Any ideas?
Try to check the w-lan visibility of your 360 cam with your router or an other smartphone.
Maybe the problem happens only to your phone.
non-toxic said:
Try to check the w-lan visibility of your 360 cam with your router or an other smartphone.
Maybe the problem happens only to your phone.
Click to expand...
Click to collapse
Thanks. For whatever reason I can see the LG's wifi signal on my phone today. My phone can connect to the wifi but when I open up the app it is unable to connect to the 360 and eventually disconnects from the wifi signal.
Progress from yesterday but still a mystery why it no longer connects.
Is it me having user error or stupidity of lg... When connected to the camera via WiFi direct I have no data connection. ( You can't use wifi and mobile data at the same time) so how in the hell do I check for updated software?????????
byt3b0mb said:
Is it me having user error or stupidity of lg... When connected to the camera via WiFi direct I have no data connection. ( You can't use wifi and mobile data at the same time) so how in the hell do I check for updated software?????????
Click to expand...
Click to collapse
It is because of LG. I understand why they did it that way and I'm not sure if there is another way they could have done it without a tethered connection. You use the "LG Friends" manager app to do the updates.
Thanks! The other thing that would have made this thing awesome is a physical switch or button to change between 180 & 360
byt3b0mb said:
Thanks! The other thing that would have made this thing awesome is a physical switch or button to change between 180 & 360
Click to expand...
Click to collapse
Look at the manual, I believe the button on the side switches between 180 & 360.
eremeya said:
Look at the manual, I believe the button on the side switches between 180 & 360.
Click to expand...
Click to collapse
http://360camerasforums.com/index.php?/topic/387-switch-from-360°-to-180°-on-camera/
byt3b0mb said:
http://360camerasforums.com/index.php?/topic/387-switch-from-360°-to-180°-on-camera/
Click to expand...
Click to collapse
Like I said look at the the LG user manual.
You short press the button on the side to change modes.
http://www.lg.com/uk/support/guides/mobile/g5/360-cam
I only took about 15 seconds to search Google and find this.
No need to be rude... I've read the manual and mine does not work that way..
sent via op5 and xda-app
I edited my build.prop successfully to allow it to connect to miracast displays. However trying to connect to my TV or Roku it fails. I had this feature work in my previous phone work just fine so I'm pretty sure its the phone. All I did with it so far is root the phone and make the edit.
Does this work for anyone else? Can this be troubleshooted?
Also wondering if a solution has been found to this. I've read about the build.prop solution and am wondering if it's successful or not?
PsiPhiDan said:
Also wondering if a solution has been found to this. I've read about the build.prop solution and am wondering if it's successful or not?
Click to expand...
Click to collapse
This is a known issue and will take a DEV a little work to get the fix. I would suspect a framework mod... Last I knew @Mentalmuso was aware and hoping he includes this feature on his MOD work for the pixel.
+1 for Miracast support! I've done the build.prop edit, and it indeed does enable the checkbox "Enable Wireless Display". It sees and attempts to pair to my Belkin Miracast device. The Belkin device begins the connections and then disconnects, and nothing more happens.
If someone will message me and tell me what to gather, I can provide any logs you require. Just send me instructions to obtain. I really really really want this to work!
b00ster23 said:
This is a known issue and will take a DEV a little work to get the fix. I would suspect a framework mod... Last I knew @Mentalmuso was aware and hoping he includes this feature on his MOD work for the pixel.
Click to expand...
Click to collapse
Man I hope he can! My smart tv has Miracast built in so I could easily throw my screen on there with my LG V20. Now I would need to buy a Chromecast to mirror? Not cool, Google. I wish my TV had Chromecast built in...