ive been using wifi tethering and taht works fine but i would rather use usb to save a bit of power. the thing is everytime i click usb tether windows sees the device and in network connections says identifying but windows its self locks up. it never moves from identifying and windows stays unusable with no actual data connection made no matter what i do. then the instant i click on the phone to turn of usb tethering windows snaps back to life.
otherwise the computer can normally see the phone fine for moving files on and off it so i dont think its a driver problem. i just dont know whats wrong, can any one help?
Related
I have a strange problem with a HTC Touch PRO. Here is my problem:
- I insert the USB cable and the phone asks if I want to use mass storage or activesync
-the phone shows a connection on the screen
-The PC is not sensing anything, the activesync is not connected.
I think this problem appeared after I used a wrong usb cable...
Anyone knows anything what to try? or this is a hardware problem?
Did you select ACTIVESYNC?
There are 2 modes this phone can do..
1) Standard ActiveSYNC or
2) AS a MASS STORAGE DEVICE -like a flash drive...
You have to select ActiveSYNC to actually SYNC software/calendar, else it will show up as just another drive to drag/drop files..
Yes i did it in every way and the computer is not sensing the connection with the phone.
Anyone know what kinf of hardware is responsible for the connection with the pc?
laseru said:
Yes i did it in every way and the computer is not sensing the connection with the phone.
Anyone know what kinf of hardware is responsible for the connection with the pc?
Click to expand...
Click to collapse
The problem is likely with your operating system on your pc.
You can try things like, un-installing the HTC usb driver in device manager.
Check your firewall.
- allow activesync for trusted
- I know for ZoneAlarm you have to go to the adapters section and set the ipaddress (a new one is created when your phone is hooked up via USB) to be trusted.
If that doesn't fix issue perhaps its a corrupt install of ActiveSync. Try uninstalling and reinstalling.
laseru said:
Yes i did it in every way and the computer is not sensing the connection with the phone.
Anyone know what kinf of hardware is responsible for the connection with the pc?
Click to expand...
Click to collapse
I've had this happen to me. I've got so many USB to mini-USB cables and they are not all alike.
Sometimes, it would work and sometimes activesync would not recognize it.
CHANGE YOUR CABLE to another. Hopefully, you've labeled the original cable that came with the phone..
(also, look at the mini cable where it plugs into your phone. Make sure there are no loose pins and/or verify that the 'plug' is level.
Try a different USB port
Try unchecking "use advanced network configuration" in Async settings on the phone. Some computers (for various reasons) have a hard time communicating with the phone when it's configured as a network device - unchecking this will often allow Async to find and connect to the phone, at the expense of some other functionality.
coincendentally i am having the same exact issue, it started last night.
i have tried 3 different cords, on all 3 usb ports on my computer. same thing the phone asks what kind of connection i want whether i select disk drive ofr active sync noting happens. whats weird is that the phone is charging when its connected however the computer is not seeing it at all.
i have tried all the recommendations in this thread but nothing is working. anymore help would be greatly apprciated!
Me too I have tryed everything but none is working.
I think that this a hardware problem, and the problem started to happen after i used a non HTC cable, bad quality. I think some kind of controller is dead. So i started to live with that
When I connteced to the PC via USB, my TP also asked me how to connect (AS or as disc). But suddenly it doesn't ask anymore. I had to deactivate "advanced network configuration" to conntect to AS.
The checkbox "ask each time USB connects" is activated.
What can I do that the phone asks again when I connect it?
Thx.
I have the same thing going on... suddenly a few days ago my fuze only charges when I plug it in the desktop with a usb cable... I re-flashed and it worked about halfway through a sync and then started again... I've tried different cables... uninstalled all of the usb drivers, and reinstalled then updated them... Disconnected the power supply... tried every setting on my phone, and in windows.... I've even uninstalled the last batch of windows updates that came out last week... nothing seems to work...
really simple solution.
decheck advanced network config. plug in cable wait till you see usb connected. a small box. after that choose for example activesync
internet share
This happened to me last night and I figured out that after you toggle your internet sharing you can sync up again. Idk why it works out like that but it worked for me.
This sound reasonable, because the last thing I did before was selecting the "internet sharing" option in the menu when you connect to USB.
But what do you mean with "toggle your internet sharing"? Can you please describe it.
Thx.
try this
okay - first see if you're getting an active connection with your pc , not from the network connections window, but by running mymobiler. I was getting a connection through mymobiler, but active sync wasn't recognizing the device. If mymobiler works, Call your phone. it will drop your connection with mymobiler when you answer the call. then hang up the phone call. (all the while leaving your cable plugged into your phone. When the call has been disconnected your activesync will recognize the connection and sync up again. I don't know why this works, but I've been able to duplicate the results several times.
Same htc ****+ wm. Bought an iphone 3g. Everything must be tuned in windows mobile! It doesn't work how it should!
None of this seems to be working... I've even flashed new roms and it stops working halfway through the sync... it doesn't even appear as though windows recognizes the device... it makes no noise or pop-up when I connect it...
Still charges though... Don't know what is going on...
Reinstall Mobile Device Manager!
modulusman said:
None of this seems to be working... I've even flashed new roms and it stops working halfway through the sync... it doesn't even appear as though windows recognizes the device... it makes no noise or pop-up when I connect it...
Still charges though... Don't know what is going on...
Click to expand...
Click to collapse
I've experienced this issue multiple times, as I use my TP to sync with many stations. The solution is way more simple than you think and it has nothing to do with cables!.
You probably use Win Vista so all you need is to uninstall "Windows Mobile Device Center", restart the PC and install a fresh copy from MS site.
http://www.microsoft.com/downloads/details.aspx?FamilyID=83D513EA-9DF9-4920-AF33-3A0E2E4E7BEB&displaylang=en
If you're on XP, do the same with the Active sync solution for XP.
Good luck!
yeah this happens to me every now and then. the advanced network configuration option really helps, but sometimes i just need to plugin/unplug the usb cable from teh phone/cable or cable/computer a couple more timesbefore it picks it up...
goodluck!
Hi there...
A quick question about the USB...
Is is at all possible to have a USB-port that can still charge the phone, but at the same time is "dead" when you try to connect the phone to the computer ??
I have also asked about it here:
http://forum.xda-developers.com/showthread.php?t=1179171
The story is that the Phone (SonyEricsson X10i) can be charged fine, but when i connect it to the computer, my computer say that the hardware is not recognized, nomatter if it is in flash-mode, mounted from recovery or in the normal way.
And the phone don´t even show anything about USB connection in the status bar eigther.
I have tried 5 different computers now, and 2 different usb cables.
I have also a X10 mini and a Desire HD that works fine on all the computers and both cables.
I have tried to remove software, remove drivers, clean computers, reboot, check the memory-card in the phone, install software and drivers and all other things i can think off...
It is two windows 7 and three windows XP computers btw.
So is it at all possible that the phone can still be charged, but data-connection fail ?
As i see it, there must be some kind of data-exchange or else the computers would not even say "hardware not recognized"...?!?
I'm not quite sure I understood your question correctly, but let's see if this helps:
I used to have phone that didn't have drivers for Windows I used at the time (I think it was Windows 7). That meant that Windows wouldn't recognize it (when plugged via USB cable) and will not therefore provide power to that USB port (hence the phone will not charge).
I was able to get around the problem by going to the device manager, locating the relevant "unknown device" and force installing some random drivers for it -- I don't even remember what it was that I picked -- something that Windows would allow me to do. Of course the port wouldn't work as a data connection like this, but since Windows now 'knew' the device, it powered the USB port and I was able to charge my phone from it.
My problem is that I actually can charge the phone ok...
But I am not able to make a data connection between the computer and the phone at all...
My question is then, if the usb connector in my phone can somehow be broken even though I am still able to charge the phone...?
Sent from my Desire HD using XDA Premium App
I'm fairly sure that yes, the contacts or the controller can be broken so that you can still charge but be unable to establish data connection.
I'll try and make this short. Phone charges fine on comp. or charger. Phone works some what fine. Bluetooth seems to be getting quieter and quieter, but thats not the main issue. WMDC isnt working. I uninstalled it and restarted, I downloaded a newer version, I even tried about 5 cables and still the computer isnt even seeing any device what so ever. I was going to task 29 and reflash but now I'm affraid if the phones not even being recognized. Is there some setting or something that happened to of gotten changed that block my phone other than the obvious -virus protection.
Using windows 7. Any help would be appreciated. Thank you.
Try a different usb port. I have had issues where the port I normally use for charging/syncing refuses to recognize my phone. I just use a different port and everything works fine. Even the first port starts working again. Windows 7 does seem to reinstall drivers again when I use switch ports, so patience is required.
Tried many different ports. Can't do a hard reset because : 1- I have some info and text that needs to be sync'd and : 2 my end button doesn't work anymore. Actually it was sticking so I kinda disconnected it. I would try to do a reflash from a SD card but like I said, I have stuff that I need sync'd and I'm not really sure if the phone just isnt going bad or software. I guess either way it wouldn't matter. Would like to learn how to sync with wifi.
I believe there is a wifi-sync method/program, but am not aware of the specifics. You could save your information to your sd card and simply use a usb reader to transfer the information that way. Or you can use the blutooth explorer on the phone to transfer to another blutooth device. Or I believe Google has a sync service so you can sync you information to your computers anytime and anywhere.
You can remap the "end" function to another key.
Your phone's usb port could have a cracked connection as mine disconnects while synced if I move the phone too much.
WMDC does not recognize the Mobile Device "MSW Vista and Later OS"
Try this procedure(s);
Settings, All Settings, Connections, USB Connections, clear the "Fast File Transfer" check mark under the Active Sync option. Restart the device and before connecting to the PC Double check to see if the the fast file transfer is still clear. then go ahead and try to see if your PC sees your device. Good Luck.
"ALEXANDER OF PERSIA"
What I neeed is is an iphone or an android device to acts a wifi adapter/dongle so I can view a list of available access points on my computer and connect to them.
Does this make sense?
I'm sure this is possible.
Does anyone have any idea?
Ay help help? Thanks!!
houseonfire said:
What I neeed is is an iphone or an android device to acts a wifi adapter/dongle so I can view a list of available access points on my computer and connect to them.
Does this make sense?
I'm sure this is possible.
Does anyone have any idea?
Ay help help? Thanks!!
Click to expand...
Click to collapse
What exactly are you trying to do?
Are you trying to tether your computer through your phone (i.e. connect the computer to the phone via USB cable, and then use the phone's WiFi / 3G connection on your computer)?
Or just use the phone as a wifi finder (which seems odd because if your computer has WiFi then it should be able to see the access points on its own..)?
I'll assume you're going for the first one because the second one doesn't make any sense. You should search the forum for "USB tether" .. although since you're asking for iPhone or android, it seems like you don't have a device yet...
mdizzlew said:
What exactly are you trying to do?
Are you trying to tether your computer through your phone (i.e. connect the computer to the phone via USB cable, and then use the phone's WiFi / 3G connection on your computer)?
Or just use the phone as a wifi finder (which seems odd because if your computer has WiFi then it should be able to see the access points on its own..)?
I'll assume you're going for the first one because the second one doesn't make any sense. You should search the forum for "USB tether" .. although since you're asking for iPhone or android, it seems like you don't have a device yet...
Click to expand...
Click to collapse
I have no WiFi adapter. I want to use an android/iPod as a wifi adapter so I can see possible connections listed on the PC (providided by the ipod or android device)..
I build a WiFi antenna that i want to put the device in, i hook the phone/ipod to the computer, then on the computer i find the best wifi point to connect to and connect to it.
I dont want to see the listings for the access points on the device, i want to see and connect to the listings on my computer.
Shameless bump.
I basically want my old android phone or old iPod touch to act as a wifi adapter. That's it.
You mean a hotspot?
Hey all, Im having some issues while trying to tether on win8.1. First i plug in the phone, then i goto settings and enable usb tethering. the phone says its working, but nothing happens on the computer. about 4 mins later my computer finally connects and i have internet, but its real glitchy, it kinda works but it drops in and out alot., my computer freezes and windows kinda "stops responding" at times. even other programs stop responding or go blank.
Im on slimkat stable 9, Everything ells works, wifi tether, MTP connection, everything but usb tether, its just really weird. I have the google usb driver installed, and windows is up to date.
Anybody have any ideas?
Nothing?