[GUIDE] [Root] [CWM] Samsung Galaxy Ace 3 { GT-S7270 , GT-S7272 , GT-S7275 , GT-S7270L , GT-S7273T , GT-S7275R }
Exclusive !!!!!!
In this guide i will tell you how to install ClockWorkMod Recovery and Root Samsung Galaxy Ace 3
Disclaimer
You follow this guide and use the software at your own risk I will no be held responsible for anything that happens to you or your device if you choose to follow it or use the software. Everything you do you choose to do yourself and is nothing to do with me!
That being said I will try my best to help you if anything goes wrong
Click to expand...
Click to collapse
Tested on Samsung Galaxy ACE 3 ( GT-S7270 & GT-S7272 ) and 100% Working Perfectly
Click to expand...
Click to collapse
First Downloads :
1- Samsung USB drivers
2- Odin v3.07
3- Non-touch recovery
4- Touch recovery
5-Root Files
Steps :
1- Install Samsung USB drivers
2- Extract Odin And Run"odin3_v3.07.exe" as Admin
3- Select PDA Buttton
4- Choose the TAR file of type of recovery you prefer (Touch or non touch)
5- Active USB Dubugging , then power off the phone
6- Go into download mode using this button combination"Home+ Volume DOWN + Power"
7- Select Volume UP to continue
8- Press Start in odin
- The Phone will reboot now --you have installed CWM--
9- Copy root.zip to your memory card / internal memory then turn off the phone
10- Go to ClockWorkMod By using this button combination "Home + Volume UP + Power"
11- Select Install zip from SDcard , Select choose zip from SDcard , select root.zip
12- Select reboot to system now
- Now your Samsung Galaxy ACE 3 is Rooted with SuperSU Pro Installed--
For Variants of Ace 3 that can't install ClockWorkMod , you can root without using it :
For rooting GT-S7270L , GT-S7275R , GT-S7273T ,,,etc
First Download and install this chinese universal rooting program from Here
Then
1- Turn on USB dubugging in your Galaxy Ace 3
2- Connect your phone to your PC
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Wait
Now you are Supposed to be Done
Check if Superuser app is now installed on your phone
Tell Me your results
If you want to install different superuser app and replace that chinese app:
1- Download SuperUser by ChainsDD from Here (playStore) or Here (Direct link , apk inside Zip)
- OR download SuperSU by ChainFire From Here (PlayStore) or Here (Direct link , apk inside Zip)
2- Install the preferred app ( I recommend SuperSU as it's Faster )
3- If asked , update binary , so your new Super User app become active
4- If Not Asked , Update the Binary Manually :
- In SuperUser go yo [Info] tab then update
- In SuperSU it Should update automatically
5- Download Root Uninstaller From Here
6- Uninstall Chinese Superuser app using root uninstaller
Disclaimer
You follow this guide and use the software at your own risk I will no be held responsible for anything that happens to you or your device if you choose to follow it or use the software. Everything you do you choose to do yourself and is nothing to do with me!
That being said I will try my best to help you if anything goes wrong
Click to expand...
Click to collapse
I Hope my First Tutorial in XDA Developers was useful to you
This Post is Copied from another website ,,becuase i found it usefull ,,,thanks for the main writer Mazen Khaled the original post is at this Link :::: http://theandroidclub.blogspot.com/2013/08/guide-root-cwm-samsung-galaxy-ace-3-gt.html?m=1
Al-Mobarmge said:
[GUIDE] [Root] [CWM] Samsung Galaxy Ace 3 { GT-S7270 , GT-S7272 , GT-S7275 , GT-S7270L , GT-S7273T , GT-S7275R }
Exclusive !!!!!!
In this guide i will tell you how to install ClockWorkMod Recovery and Root Samsung Galaxy Ace 3
Click to expand...
Click to collapse
nice guide, but wrong place of thread I think
you should create it this thread at Galaxy Ace I and Ace II section if unavailable at that section
Thanks very much was waiting for that
shadytarek_97 said:
Thanks very much was waiting for that
Click to expand...
Click to collapse
You are welcome :laugh::laugh::laugh::laugh::good::good::good:
{{{{{{wb3den anta btshkrny leh dah a7na msryn zay b3den 2y 5d3a ya 3m :laugh::laugh::good::good:}}}}
Al-Mobarmge said:
[GUIDE] [Root] [CWM] Samsung Galaxy Ace 3 { GT-S7270 , GT-S7272 , GT-S7275 , GT-S7270L , GT-S7273T , GT-S7275R }
Exclusive !!!!!!
In this guide i will tell you how to install ClockWorkMod Recovery and Root Samsung Galaxy Ace 3
First Downloads :
1- Samsung USB drivers.exe
2- Odin_v3.07.zip
3- Non-touch recovery.tar
4- Touch recovery.tar
5- Root.zip
Steps :
1- Install Samsung USB drivers
2- Extract Odin And Run"odin3_v3.07.exe" as Admin
3- Select PDA Buttton
4- Choose the TAR file of type of recovery you prefer (Touch or non touch)
5- Active USB Dubugging , then power off the phone
6- Go into download mode using this button combination"Home+ Volume DOWN + Power"
7- Select Volume UP to continue
8- Press Start in odin
- The Phone will reboot now --you have installed CWM--
9- Copy root.zip to your memory card / internal memory then turn off the phone
10- Go to ClockWorkMod By using this button combination "Home + Volume UP + Power"
11- Select Install zip from SDcard , Select choose zip from SDcard , select root.zip
12- Select reboot to system now
- Now your Samsung Galaxy ACE 3 is Rooted with SuperSU Pro Installed--
For Variants of Ace 3 that can't install ClockWorkMod , you can root without using it :
For rooting GT-S7270L , GT-S7275R , GT-S7273T ,,,etc
First Download and install this chinese universal rooting program from Here
Then
1- Turn on USB dubugging in your Galaxy Ace 3
2- Connect your phone to your PC
Wait
Now you are Supposed to be Done
Check if Superuser app is now installed on your phone
Tell Me your results
If you want to install different superuser app and replace that chinese app:
1- Download SuperUser by ChainsDD from Here (playStore) or Here (Direct link , apk inside Zip)
- OR download SuperSU by ChainFire From Here (PlayStore) or Here (Direct link , apk inside Zip)
2- Install the preferred app ( I recommend SuperSU as it's Faster )
3- If asked , update binary , so your new Super User app become active
4- If Not Asked , Update the Binary Manually :
- In SuperUser go yo [Info] tab then update
- In SuperSU it Should update automatically
5- Download Root Uninstaller From Here
6- Uninstall Chinese Superuser app using root uninstaller
I Hope my First Tutorial in XDA Developers was useful to you
Click to expand...
Click to collapse
Yo Yo i've rooted with the VROOT software.
Though the recovery method just won't work :/
Worked for GT-S7275T. Didn't need Root Uninstaller to remove Chinese SU.
Thanks!
Still does not work on S7275R LTE. There is no working recovery image available yet. I'm stuck in the "Recovery Booting..." dialog.
wow you're great at copying bro http://theandroidclub.blogspot.com/2013/08/guide-root-cwm-samsung-galaxy-ace-3-gt.html -_-
Hi man, go get your phone flashed back to official ace 3 firmware. That recovery booting page is all you will see because its stuck. . Currently there are no CWM for our phone. We can only root it with the VROOT app
Sent from my GT-S7275R using xda app-developers app
Mazzen.kh said:
wow you're great at copying bro http://theandroidclub.blogspot.com/2013/08/guide-root-cwm-samsung-galaxy-ace-3-gt.html -_-
Click to expand...
Click to collapse
I had Copied your own Post because i found it usefull and it helped me ,,,,,and becouse i didn't find any post like this on Xda-developers so i copied it to help more people to root this device ,,,,,,, And i'm sorry about not taking your permission to re-post your own thread ......I have edited the post and but your Name on it ,,,,,,i hope no hard feelings between us ,,,All what i think about at thus time is to help more people to root this device ,,,,
Tre91 said:
Hi man, go get your phone flashed back to official ace 3 firmware. That recovery booting page is all you will see because its stuck. . Currently there are no CWM for our phone. We can only root it with the VROOT app
Sent from my GT-S7275R using xda app-developers app
Click to expand...
Click to collapse
Are you sure about it?
I have found 2 guides for flashing CWM into s7275R, but I haven't tested anyone yet.
For the first one, search on google, "Install Galaxy Ace 3 LTE S7275R ClockworkMod 6 Recovery – Complete Guide" it should be the first result by TeamAndroid
The second guide, is made by our fellow forumer Mazen Khaled a.k.a. Mazzen.kh and can easily be found by the link he posted previously.
What's going on with them? Have anyone tested any of them?
P.S.
Sorry for the inconvenience but since I am a new member, I am not able to cite links before posting 10 messages.
Al-Mobarmge said:
[GUIDE] [Root] [CWM] Samsung Galaxy Ace 3 { GT-S7270 , GT-S7272 , GT-S7275 , GT-S7270L , GT-S7273T , GT-S7275R }
Exclusive !!!!!!
In this guide i will tell you how to install ClockWorkMod Recovery and Root Samsung Galaxy Ace 3
Click to expand...
Click to collapse
Awesome guide! Thanks! I finally able to root my cousin's phone :good: but I would like to know if there is a way to swap memory in Ace 3 does anyone know how to swap it? or at least to modify the vold.fstab file?
SOADNICK said:
Are you sure about it?
I have found 2 guides for flashing CWM into s7275R, but I haven't tested anyone yet.
For the first one, search on google, "Install Galaxy Ace 3 LTE S7275R ClockworkMod 6 Recovery – Complete Guide" it should be the first result by TeamAndroid
The second guide, is made by our fellow forumer Mazen Khaled a.k.a. Mazzen.kh and can easily be found by the link he posted previously.
What's going on with them? Have anyone tested any of them?
P.S.
Sorry for the inconvenience but since I am a new member, I am not able to cite links before posting 10 messages.
Click to expand...
Click to collapse
Mate, check the header of that guide properly. Models like ours, S7275R does not have a CWM recovery yet.
This i can promise you.
As far as rooting goes, we can do it easily.
Nieon. said:
Awesome guide! Thanks! I finally able to root my cousin's phone :good: but I would like to know if there is a way to swap memory in Ace 3 does anyone know how to swap it? or at least to modify the vold.fstab file?
Click to expand...
Click to collapse
Their is no way to Swap Memory in this device found yet and if you try to modify the ""Vold.fstab"" file it will lead your phone into BootLoop ,,,, Note::: I had tried Modifying it and it leads my device to Bootloop ,,,,,,So i don't recommand it to you
Sent from my GT-S7272 using XDA Premium 4 mobile app
Tre91 said:
Mate, check the header of that guide properly. Models like ours, S7275R does not have a CWM recovery yet.
This i can promise you.
As far as rooting goes, we can do it easily.
Click to expand...
Click to collapse
Their is no CWM for This Device yet but this CWM Version will work fine in Your phone check it out ,,,,, I Have been using it on my device (GT-S7272) which also doesn't have an Official CWM for it untill Now but this CWM version works great on it try using it ......
Sent from my GT-S7272 using XDA Premium 4 mobile app
Their is no way to Swap Memory in this device found yet and if you try to modify the ""Vold.fstab"" file it will lead your phone into BootLoop ,,,, Note::: I had tried Modifying it and it leads my device to Bootloop ,,,,,,So i don't recommand it to you
Click to expand...
Click to collapse
ah too bad.. but can we at least increase the internal memory or such?
---------- Post added at 09:34 AM ---------- Previous post was at 09:31 AM ----------
Their is no way to Swap Memory in this device found yet and if you try to modify the ""Vold.fstab"" file it will lead your phone into BootLoop ,,,, Note::: I had tried Modifying it and it leads my device to Bootloop ,,,,,,So i don't recommand it to you
Click to expand...
Click to collapse
ah too bad.. but can we at least increase the internal memory or such?
Nieon. said:
ah too bad.. but can we at least increase the internal memory or such?
---------- Post added at 09:34 AM ---------- Previous post was at 09:31 AM ----------
ah too bad.. but can we at least increase the internal memory or such?
Click to expand...
Click to collapse
You Could use Third Party apps such like ::: ( Link2SD , Gl2SD ) to move apps to your External SD Card untill someone find away to Swap Memories in this Device ......... I Recommend for you "GL2SD" for Moving big Games to Your exSD Card and "Link2SD" to Move apps to it Too
Note **::::::
1-Link2SD Needs to make Partitions in your exSD Card (to move your apps to this partitions )
2- Both Apps Need a Big exSD Cards such Like 16GB or higher to get more space in the memory to move apps to
Sent from my GT-S7272 using XDA Premium 4 mobile app
Al-Mobarmge said:
You Could use Third Party apps such like ::: ( Link2SD , Gl2SD ) to move apps to your External SD Card untill someone find away to Swap Memories in this Device ......... I Recommend for you "GL2SD" for Moving big Games to Your exSD Card and "Link2SD" to Move apps to it Too
Note **::::::
1-Link2SD Needs to make Partitions in your exSD Card (to move your apps to this partitions )
2- Both Apps Need a Big exSD Cards such Like 16GB or higher to get more space in the memory to move apps to
Sent from my GT-S7272 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Alright will try that while waiting for the modded vold.fstab thanks for the help
Sent from my Samsung Galaxy Ace II (GT-I8160) using Tapatalk
Nieon. said:
Alright will try that while waiting for the modded vold.fstab thanks for the help
Sent from my Samsung Galaxy Ace II (GT-I8160) using Tapatalk
Click to expand...
Click to collapse
You are Welcome :thumbup:
Sent from my GT-S7272 using XDA Premium 4 mobile app
Attention
Guys
I have synced the Cyanogenmod source for CWM and now the most important thing i need is the build.prop.and recovery.img for your Ace 3 device so that i can compile a REAL CWM and a kernel with SWAP supported for Ace 3.Thank you for your cooperation and in order to root,you need the REAL CWM so that you can just flash the Chainfire SuperSU without any rooting tools
With Regards
TripRex
Related
Update- 1/3/2013
This thread is meant for MT6577 based spice mi-530 device...
I will be sharing all development related information here.....
How to root with su and busybox support:
1. Follow the procedure in thishttp://forum.xda-developers.com/showpost.php?p=21982460&postcount=1 thread to install drivers for mi-530 (dont use superoneclick just install the drivers).
2. Follow this http://forum.xda-developers.com/showthread.php?t=1886460 guide by bin4ry to root the device and install su and other dependencies.
3. Make sure you are rooted if you can see superuser app in app drawer,congratulations you are now rooted..
Install CWM for spice mi-530:
*root* required
1. Download the cwm recovery ported to mi-530 from here -
http://db.tt/UDIARWEY
and copy it to root of your sdcard
2.Download and install mobile uncle tools from play store or any other source
3. Open mobile uncle tools from app drawer and grant su permission when asked.
4. Choose "recovery update" option and select recovery.img you just copied to sdcard and confirm.
DONE!
Boot into recovery by pressing vol+ and camera while powering on.
More coming soon!!!
Note-All mods that i share here have been successfully tested by me. But still as per tradition-
DO NOT FLAME ON ME IF SOMETHING GOES WRONG.
Reserved
Reseved
One more!!
CWM for mi-530
agmtpd said:
One more!!
Click to expand...
Click to collapse
I have used it just. It is good. Automatically it rebooted.
We are waiting for Custom Rom please, you can do it young man
Thanks
agmtpd said:
This thread is meant for MT6577 based spice mi-530 device...
I will be sharing all development related information here....
Install CWM for spice mi-530:
*root* required
1. Download the cwm recovery ported to mi-530 from here -
and copy it to root of your sdcard
2.Download and install mobile uncle tools from play store or any other source
3. Open mobile uncle tools from app drawer and grant su permission when asked.
4. Choose "recovery update" option and select recovery.img you just copied to sdcard and confirm.
DONE!
Boot into recovery by pressing vol+ and camera while powering on.
More coming soon!!!
Click to expand...
Click to collapse
Please tell me How to root this set???:crying::crying::crying:
Root MI 530
sexydjb said:
Please tell me How to root this set???:crying::crying::crying:
Click to expand...
Click to collapse
Rooting process is same as mi500 u can see older post for rooting mi500. it will help u.
Thanks a lot
lalitjoshi06 said:
Rooting process is same as mi500 u can see older post for rooting mi500. it will help u.
Click to expand...
Click to collapse
batch file worked fine, but had to install drivers via pdanet, oneclickroot didn't worked for me.
Waiting for a jb update now.....
agmtpd said:
This thread is meant for MT6577 based spice mi-530 device...
I will be sharing all development related information here....
Install CWM for spice mi-530:
*root* required
1. Download the cwm recovery ported to mi-530 from here -
and copy it to root of your sdcard
2.Download and install mobile uncle tools from play store or any other source
3. Open mobile uncle tools from app drawer and grant su permission when asked.
4. Choose "recovery update" option and select recovery.img you just copied to sdcard and confirm.
DONE!
Boot into recovery by pressing vol+ and camera while powering on.
More coming soon!!!
Click to expand...
Click to collapse
I have succesfully rooted the set, but now as i try to install the recovery image, it asks permission to go to recovery mode, then nothing happens, the device just restarts.
On tryin to move to recovery mode by vol+ and camera key during startup, nothing happens, the device just starts normally.
Please help...
I do no know ! Whether I can reply?
Did you try this.
Switch off.
Hold volume up, menu key and power on key simultaneously till you get the screen pop up screen.
Wait few second touch home button.
You will get it.
Or else Try with "4Zert" method for rooting then put the CWM.
Better luck
Sent from my Spice Mi-530 using xda app-developers app
Make sure you have rooted your device....
Can you see superuser app in app drawer if you have followed bin4ry root method??
If yes then make sure busy box is installed....
Recovery issue fixed
sexydjb said:
I have succesfully rooted the set, but now as i try to install the recovery image, it asks permission to go to recovery mode, then nothing happens, the device just restarts.
On tryin to move to recovery mode by vol+ and camera key during startup, nothing happens, the device just starts normally.
Please help...
Click to expand...
Click to collapse
I think u r using old version of mobile uncle tool use latest one powerd by NJava. old versin dosent show recovery update. as u do rightly it will reboot automaticly in recovery mode. keep recovery.img in internal storage of phone. or u r using wrong combination of keys. press hold vol+ key only & powerr on untill u enter in recovery mode dont use camera button.
I think it will heip u.
Dude, this phone is already rooted,
1. just enable root access from developer settings
2. Then install superuser app from Google play
Sent from my Spice Mi-530 using xda app-developers app
Fixd recovery
sexydjb said:
I have succesfully rooted the set, but now as i try to install the recovery image, it asks permission to go to recovery mode, then nothing happens, the device just restarts.
On tryin to move to recovery mode by vol+ and camera key during startup, nothing happens, the device just starts normally.
Please help...
Click to expand...
Click to collapse
Dear u r using older version of mobile uncle tool. get latest version powered by NJAVA. In that there is a option recovery update which is not available in older version. older has recovery only.
u should keeep recovery.img in phone memory not on sd card.
or dont use camera key to enter into recovery mode the combination is Vol+ hold & turn power on untill u enters into recovery.
I think it Will Help u.
pradeepsmehra said:
Dude, this phone is already rooted,
1. just enable root access from developer settings
2. Then install superuser app from Google play
Sent from my Spice Mi-530 using xda app-developers app
Click to expand...
Click to collapse
no its not pre rooted options u r ref are standard. if u install su or superuser from market it will show as install but doesn't mean that u ve rooted for more clarity try any root app like root explorer or rom manager. it will not ask for root permission or may show that phone is not rooted.
for rooting unlockroot 2.3 will also work but u need to install mt6577 drivers.
babamanan said:
no its not pre rooted options u r ref are standard. if u install su or superuser from market it will show as install but doesn't mean that u ve rooted for more clarity try any root app like root explorer or rom manager. it will not ask for root permission or may show that phone is not rooted.
for rooting unlockroot 2.3 will also work but u need to install mt6577 drivers.
Click to expand...
Click to collapse
Can some one tell me the GPU & CPU of this Mobile..
Planning to buy it (need to confirm)...
Addicted2xda said:
Can some one tell me the GPU & CPU of this Mobile..
Planning to buy it (need to confirm)...
Click to expand...
Click to collapse
GPU - power VR sgx 531 single core
RAM - 1 gb DDR
CPU - mediatek MT6577 dual core overclocked @ 1.2 ghz
Dude
Check this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Spice Mi-530 using xda app-developers app
babamanan said:
GPU - power VR sgx 531 single core
RAM - 1 gb DDR
CPU - mediatek MT6577 dual core overclocked @ 1.2 ghz
Click to expand...
Click to collapse
Mediatek? Thanks for the info... better save some more money and invest on a One S / Desire X
Addicted2xda said:
Mediatek? Thanks for the info... better save some more money and invest on a One S / Desire X
Click to expand...
Click to collapse
its not so bad I personally recommend lava a700 for much batter display quality @ 4.5 " IPS as compared with this spice mi 530, both can handle smooth play upto 720p videos but spice mi 530 plays 1080p videos thru inbuild player only at the cost of quality, try to look at lava a700.
hello guys,
i have recently purchased a Galaxy S dous S7562.....
but did not found a good & working method for rooting & unrooting this Phone Model.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
so i tried methods like this --> method1 & method2 ,etc....
But the one which is easiest & secure is using a software called :-> UnlockRoot Pro
It is One Click Tool which can Root / Unroot our device [tested by me] :--> download from here
Requirements :--->
1. UnlockRoot Pro/free
2. Samsung USB Drivers
3. USB cable
4. Ofcourse Galaxy S Dous Phone
note :-> click on above requirements to download them..
Rooting Tutorial :-->
1. Install usb drivers on pc....
2. reboot ur pc
3. download the unlockroot free tool & extract on desktop or anywhere.
4. On ur phone >> goto Settings>Development> tick the option USB Debugging
5. Now Attach ur Phone with PC using Original USB cable.
6. open the "unlockroot.exe" extracted on desktop
7. u will see a dialog box that "do you want to add a battery saver app on ur phone"
8. u can click on yes or no according to ur need.
9. then u will be asked to "rooted successfully & reboot ur device"
10. click on "yes" & ur device will be automatically rebooted & u will see a new app [ supersu in ur AppDrawer ]
11. Ur phone is rooted now...
12. enjoy :good::victory:
UnRooting Tutorial :-->
1. same as above .......just choose on "unroot" option @ 6th step
2. follow onscreen instruction
3. Enjoy..:good::victory:
I think this is the easiest method & secure method of rooting ur device
regards,
abhi922.
No Need to say thanks, just press thanks button ..
How to Update Samsung Galaxy S Duos S7562 model to Official Stock Roms
This tutorial shows you how to Flash stock Firmware using Odin on Galaxy S Dous [S7562]
Requirements :--->
1. ODIN 3.07
2. Samsung USB Drivers
3. Stock Firmware
4. Official USB cable
5. Ofcourse Galaxy S Dous Phone
note :-> click on above requirements to download them..
Flashing Tutorial :-->
1. Install usb drivers on pc....
2. reboot ur pc
3. Download the ODIN 3.07 & save it in your PC and extract its content to Desktop.
4. Download the update firmware.zip && save it in your PC and extract the update file on your Desktop.
5. Now, turn off your Samsung Galaxy S duos device
6. Boot your S Duos device into the Download mode by pressing [ Volume down + Menu + power ] buttons on the same time.
7. now ur phone will boot into download mode ........u will see a "WARNING" like following pic.....
8. now press "VOLUME UP" button to enter into download mode :--> like the following pic -->
9. Now open "ODIN 3.07.exe" on desktop & attach ur phone to ur pc using stock usb cable.
10. When the connection is established with odin , u will be notified with the “added” message that will be displayed on the Odin interface, the ID:COM section should be colored on yellow or blue.
11. click on PDA button && select the S7562XXXXXX_S7562XXXXXX_XXXHOME.tar u extracted on desktop [file name may differ ]
12. now click on "START" button & it will take some time to flash the firmware ....
Note:-> DON'T interrupt the flashing process, it may brick ur device [ soft or hard brick]
13. U will see a "PASS" & "RESET" on ODIN application...
14. Ur phone will reboot automatically & u should be booted successfully ....
15. enjoy :good::victory: [ u have flashed stock firmware successfully on ur device ].
F.A.Q :->
1.) If the ODIN get stuck ?
ANS:->
Close the ODIN.
Disconnect your device from the PC by removing the USB cable.
again connect the device with pc.
again open Odin
Repeat the tutorial.
2.) If your device gets a Boot Loop [ boot animation agian & agian ] ?
ANS:->
Reboot device into the Recovery Mode [ VOLUME UP + DOWN + MENU + POWER ]
Perform a “wipe data factory reset” and after that “wipe cache partition”.
Then choose “reboot system now”
Direct download links for latest firmwares of some countries :---------->
1. Latest INDIAN Firmware :--> http://www.hotfile.com/dl/229449042/0829279/S7562XXBMF2_S7562ODDBMF1_INS.zip.html
2. Latest Pakistan Firmware :-> http://www.hotfile.com/dl/182607517/5c4a6e7/S7562XXALJ4_S7562OJVALJ1_PAK.zip.html
3. Latest Australia Firmware :-> http://www.hotfile.com/dl/182237627/6d44880/S7562XXALIC_S7562XSAALI4_XSA.zip.html
3. Latest Malaysia Firmware :-> http://www.hotfile.com/dl/181722186/1341499/S7562XXALJ4_S7562OLBALH5_XME.zip.html
3. Latest Sri Lanka Firmware :-> http://www.hotfile.com/dl/229450235/834a3ca/S7562XXBMF2_S7562ODDBMF1_SLK.zip.html
regards,
abhi922.
This tutorial shows you how to install cwm recovery using Odin on Galaxy S Dous
This tutorial shows you how to install cwm recovery using Odin on Galaxy S Dous [S7562]
Requirements :--->
1. ODIN 3.07
2. Samsung USB Drivers
3. Custom recovery [cwm] [custom by vikassaini01 ]
4. Official USB cable
5. Rooted rom.
6. Ofcourse Galaxy S Dous Phone
note :-> click on above requirements to download them..
Tutorial :-->
1. install any root file explorer like root explorer,root manager.
2. goto system>etc>
3. delete install-recovery.sh file or change its extension like install-recovery.sh.bak
4. now follow the above Flashing procedure [from post-2] [step from 1 to 3]
5. then download the above recovery.tar
6. follow the above Flashing procedure [post-2] [step from 5 to 10]
7. then choose "recovery.tar" in PDA section
8. follow the above Flashing procedure [post-2] [step from 12 to 15]
reboot & u have cutom recovery [cwm] in ur phone....
How to access cwm recovery :--->
Method 1 :-->
1. switch of ur phone.
2. press combination of keys [ Vol_Up + Vol_Down + Power + Home ]
3. u will be in cwm recovery
4. take backup & restore & flash custom roms , etc....
5. enjoy.
Method 2 :-->
1. install ClockworkMod ROM Manager.apk
2. open it & choose 2nd option---> " reboot into recovery "
3. u will se popup for confirmation & click on "yes"
4. ur phone will boot into recovery automatically.
[ warning : ClockworkMod ROM Manager has bricked so many phones so beware of using it ... ]
Remove Yellow triangle from boot menu ...
This tutorial shows you how to remove yellow triangle
from Galaxy S Dous [S7562] BOOT Menu ..
Requirements :--->
1. Triangle away app
2. stock firmware [ refer 2nd POST ]
note :-> click on above requirements to download them..
Tutorial :-->
1. FIRST of all flash stock firmware using ODIN [tutorial from 2nd post of this thread ]
2. Root ur stock rom without ODIN [ follow tutorial on 1st post ]
3. then install this triangle away app from above link
4. give root permissions & choose option "reset flash counter"
5. now u can UnRoot ur phone to get factory reset phone [ follow 1st post ]
6. enjoy
[ NOTE :-> This method is useful when u need to repair ur phone from official samsung center ]
stock deodexed rom by me comming soon...................
may be in btw a week
last one reserved..
UnlockRoot Pro worked for me
i find update for Superuser from the installed version (0.96)by UnlockRoot Pro to 1.34
is there any need to update , will work fine,
please confirm
ps : i did install busy-box (needed for some rooted apps to work)
gn_hanna said:
UnlockRoot Pro worked for me
i find update for Superuser from the installed version (0.96)by UnlockRoot Pro to 1.34
is there any need to update , will work fine,
please confirm
ps : i did install busy-box (needed for some rooted apps to work)
Click to expand...
Click to collapse
yes , there is no problem if u update it from playstore...
so update it if u want.
also u have to install busy-box to make some apps work like pimp up my rom.........
regards,
abhi922.
can we use I9190 Official Rom??
there is a link to download Samsung Galaxy S4 Mini Duos (GT-I9192) firmware.
it can be downloaded from here: http://www.sammobile.com/firmwares/
can we modify this rom for Galaxy S Duos??
shayanagha85 said:
there is a link to download Samsung Galaxy S4 Mini Duos (GT-I9192) firmware.
it can be downloaded from here: http://www.sammobile.com/firmwares/
can we modify this rom for Galaxy S Duos??
Click to expand...
Click to collapse
MAY BE
i will take a look at this....
help
I think i have bricked my s duos while trying to flash a kernel using odin now it is showing an error updating firmware get into recovery mode using kies. what should i do , flash a stock rom using odin??please help me solve this problem ...:angel:
@abhi922 please please upload stock deodexed rom
im gonna try this :good:
abhi922, mate i wanna ask if any flash file i mean the country it is possible use to Galaxy S duos?
That worked on my S Duos.
I was wondering what is our device name, I mean Galaxy Y is totoro explorer is Pico, what is S duos
Sent from my Surprise Galaxy S 3
Thanks for the guides, very usefull.
The rom I downloaded from sammobile was nearly 552mb and the one given in the kor thread is 882 mb
Why is the difference
Sent from my Rooted Galaxy S3
abhi922 said:
hello guys,
i have recently purchased a Galaxy S dous S7562.....
but did not found a good & working method for rooting & unrooting this Phone Model.
View attachment 2049695
so i tried methods like this --> method1 & method2 ,etc....
But the one which is easiest & secure is using a software called :-> UnlockRoot Pro
It is One Click Tool which can Root / Unroot our device [tested by me] :--> download from here
View attachment 2049626
Requirements :--->
1. UnlockRoot Pro/free
2. Samsung USB Drivers
3. USB cable
4. Ofcourse Galaxy S Dous Phone
note :-> click on above requirements to download them..
Rooting Tutorial :-->
1. Install usb drivers on pc....
2. reboot ur pc
3. download the unlockroot free tool & extract on desktop or anywhere.
4. On ur phone >> goto Settings>Development> tick the option USB Debugging
5. Now Attach ur Phone with PC using Original USB cable.
6. open the "unlockroot.exe" extracted on desktop
View attachment 2049661
7. u will see a dialog box that "do you want to add a battery saver app on ur phone"
8. u can click on yes or no according to ur need.
9. then u will be asked to "rooted successfully & reboot ur device"
10. click on "yes" & ur device will be automatically rebooted & u will see a new app [ supersu in ur AppDrawer ]
11. Ur phone is rooted now...
12. enjoy :good::victory:
UnRooting Tutorial :-->
1. same as above .......just choose on "unroot" option @ 6th step
View attachment 2049670
2. follow onscreen instruction
3. Enjoy..:good::victory:
I think this is the easiest method & secure method of rooting ur device
regards,
abhi922.
No Need to say thanks, just press thanks button ..
Click to expand...
Click to collapse
what if im running a custom rom ?
dont i have to flash the stock firmware after unrooting? :/
funnypharmacist said:
The rom I downloaded from sammobile was nearly 552mb and the one given in the kor thread is 882 mb
Why is the difference
Click to expand...
Click to collapse
My downloaded KOR has only 427.282.699 Bytes.
i have purchesed galaxy s duos. this phone shows network problem, no signal. what will i do? i rooted this phone.
---------- Post added at 04:45 PM ---------- Previous post was at 04:39 PM ----------
Omkar$ said:
@abhi922 please please upload stock deodexed rom
Click to expand...
Click to collapse
link to download any galaxy stock rom::http://samsung-updates.com/
BEST SITE, NO NEED SIGN IN< FIND UR MODEL AND DOWNLOAD.
Please read the guides below before asking questions
========================================================================================================================
This CWM and Root Method is tested from many users and at least by me on this devices GT-I9506 and SHV-E330S!!
========================================================================================================================
USE THIS GUIDE WHEN YOU KNOW WHAT YOU DO AND YOU DONT CARE ABOUT KNOX WARRANTY 0x1b !!!
IF YOU DONT WANT TO VOID YOUR KNOX WARRANTY STOP READING THE TEXT BELOW AND GO OUT OF THIS THREAD..... Thanks !!!
========================================================================================================================
----- SHORT DECLARATION - ODIN3 -----
PDA refers to the build version of the firmware
Phone refers to the baseband/modem version
CSC is the consumer software customisation and is specific to geographical region and carriers. It contains the software packages specific to that region, carrier branding and also APN settings for data connection, MMS etc for your service provider.
CSC has nothing to do with what languages the firmware supports and it will not add keyboard language support either.
.PIT refers to the partition information table you only need it if you screw up your partition table or if the firmware specifically requires it because of a change in the partition table layout. It's very likely you may never have to use this.
If the package only contains one .tar archive then it will have everything, pda+phone+csc, in the one file.
If it has multiple .tar archive then:
• The .tar with modem in the name is the phone/baseband bit of the package
• .tar with csc/multi-csc in the name is the csc bit of the package
• .tar with code/PDA in the name is the PDA part of the firmware package
If this is the case you will need to put these .tar archives in the specific areas of Odin to flash the update
Click to expand...
Click to collapse
Get -->Odin3<-- Just extract Odin folder and keep the odin3.ini file in it.
I use v1.85 in this guide you can use also the latest version... it doesnt matter.
Click to expand...
Click to collapse
----- FLASHING WITH ODIN3 v1.85 -----
Click to expand...
Click to collapse
1. Just download the CWM version you want from the 2nd post. It must be a .tar or .tar.md5 file!!
2. Reboot your phone to download mode.
To get download mode shut down the device. After it shuts off completely simultaneously press the Down volume key + press the power button .
You should see a warning asking you to press volume up if you want to continue or volume down to cancel, press volume up. You are now in download mode!
3. Start Odin
4. Click on the PDA button and browse to the .tar or .tar.md5 file that you downloaded in step 1
5. PLEASE DO NOT PUT .PIT FILE AND DO NOT, I REPEAT, DO NOT TICK REPARTITION!!!
6. Connect the USB cable and wait for the ID:COM section to turn yellow
Should look like this screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7. Click start to flash
8. Do not disconnect the cable or turn off the device, it will reboot when it finishes.
Click to expand...
Click to collapse
========================================================================================================================
-- ROOT METHOD SGS4 I9506 + E330S --
Click to expand...
Click to collapse
The following root file was made for the E330S and works also on I9506.
The only difference to the original file is that i changed the Korean superSU.apk with the International free superSU.apk from great Chainfire´s thread: http://forum.xda-developers.com/showthread.php?t=1538053
Now you are able to read the text and dont need to learn Korean language
Click to expand...
Click to collapse
1. Download ROOT_E330S_I9506_v2.zip and Latest UPDATE-SuperSU-vX.xx.zip package fom Chainfire!!!!!
3. Transfer the file ROOT_E330S_I9506_v2.zip and UPDATE-SuperSU-vX.xx.zip to the extSDCARD(the SDCARD where you afterwards plugged in!!) or the SDCARD(from your device)
4. Turn off your Device
5. After device completely OFF - Enter Recovery
-->Entering Recovery:
- Hold Volume UP + Power Button
- When device turns ON, RELEASE POWER BUTTON when it says RECOVERY BOOTING (ignore the text "SECURE FAIL: Recovery" since you flashed CWM ....)
- Will Enter Recovery
6. Select install Zip
6.1 Select choose zip from external SDCARD(if you transferred it on SDCARD where you afterwards plugged in!!) or choose zip from SDCARD(from your device)
7. Select file ROOT_E330S_I9506_v2.zip
8. Move to YES - Install ROOT_E330S_I9506_v2.zip touch it or Push the Power button
9. Return to CWM main menu
10. Select install Zip
10.1 Select choose zip from external SDCARD(if you transferred it on SDCARD where you afterwards plugged in!!) or choose zip from SDCARD(from your device)
11. Select file UPDATE-SuperSU-vX.xx.zip
12. Move to YES - Install UPDATE-SuperSU-vX.xx.zip touch it or Push the Power button
13. When update procedure finished, REBOOT.
Now your device is rooted!
Click to expand...
Click to collapse
Cheers
If i forgot something or it is wrong just post here in thread Thanks!
Cwm - versions - download
On this Post you can dowload the CWM to flash it with ODIN to your device.
FOLDER: 1_CWM_FILE_I9506_E330S
1. Chenglu_cwm_recovery_6.0.3.7(0905)-fix-exSdcard.tar <-- build from Chenglu @Chenglu aka github: xiaolu
2. Philz_Touch _CWM_6.3.7_V5.15.0_unofficial.tar <-- a unofficial build by unknown from @Phil3759 - Philz Touch CWM -- github: philz_touch_cwm6
Click to expand...
Click to collapse
Many thanks to this persons!!! a big -> ^^
FOLLOWING CWM IS SPECIALLY TESTED AND MODIFIED FOR GT-I9506!! (NOT TESTED ON E330S!!)
FOLDER: 1.1_CWM_FILE_I9506
1. Philz_Touch__CWM_6.3.7_V5.15.0_unofficial_(fixed_preload).tar <-- a unofficial build modified for I9506 by xenix96 from @Phil3759 - Philz Touch CWM -- github: philz_touch_cwm6
2. CWM_6.0.4.6_Non-Touch_GT-I9506.tar <-- a unofficial CWM build from @dridri85 -- github: dridri / android_device_samsung_ks01lte
Click to expand...
Click to collapse
Happy debloating guys
another one ^^^^^^
^^ last one ................
Thanks! xenix96.
This Works great for my I9506.
Thanks xenix96!
If it wasn't for you I would still be with a castrated beast.
I just want to ask if this custom version of Phil's Touch has less features compared to the common one we all know?
Otherwise I will have to install the CWM, but I don't like it.
Sent from my (soon rooted) Samsung Galaxy S4 LTE+ (GT-I9506)
Cr4z33 said:
Thanks xenix96!
If it wasn't for you I would still be with a castrated beast.
I just want to ask if this custom version of Phil's Touch has less features compared to the common one we all know?
Otherwise I will have to install the CWM, but I don't like it.
Sent from my (soon rooted) Samsung Galaxy S4 LTE+ (GT-I9506)
Click to expand...
Click to collapse
I use this unoffcial release of philz cwm cause it has much more features and mostly all features working.
aroma file manager, terminal, script thing i didnt tested and really never used it.
the chenglu cwm got only the basic features of cwm like we all know from source. for all who dont want more its also great
ok kids and wife waiting for to make breakfeast
Cheers
Sent from my GT-I9506 using XDA Premium 4 mobile app
xenix96 said:
I use this unoffcial release of philz cwm cause it has much more features and mostly all features working.
aroma file manager, terminal, script thing i didnt tested and really never used it.
the chenglu cwm got only the basic features of cwm like we all know from source. for all who dont want more its also great
ok kids and wife waiting for to make breakfeast
Cheers
Sent from my GT-I9506 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah I choosed the same.
I only suggest you to add at step #6 of the flashing tut the link to the Samsung USB drivers as it's a common thing people might forget to install and therefore the device wouldn't be detected when connecting by USB.
Now thanks to you I can finally back everything up with Titanium and flash another ROM (the NEE one)!
Remember to setup a Beer button so that we can offer you one.
Cr4z33 said:
Yeah I choosed the same.
I only suggest you to add at step #6 of the flashing tut the link to the Samsung USB drivers as it's a common thing people might forget to install and therefore the device wouldn't be detected when connecting by USB.
Now thanks to you I can finally back everything up with Titanium and flash another ROM (the NEE one)!
Remember to setup a Beer button so that we can offer you one.
Click to expand...
Click to collapse
well if you take a look to my signature and push to the thread with firmwares....then go to rooting section theire i wrote the samsung drivers ....
on this currently thread i thought everyone knows that we need driver to communicate with device....
but your 100% right i have to explain that for those who dont know that.
so i will add this evening
i got a beer button under my avatar but for that you guys dont need do anything.
spare your beers for real developer !!!
i hope we get some devs for this device
I just gathered informations - tested - and share it with you guys. nothing special for me.
cheers
Sent from my GT-I9506 using XDA Premium 4 mobile app
I have chosen Philz Touch CWM and im not able to mount my external SD card. Did you guys have the same problem?
I alwys get the message: Can't mount /external_sd/
But internal SD card is working.
Edit: Ok... was able to get access to external SD card with Chenglu's CWM
boart
No i had no problems with the external sd card.
Rechargelegend said:
boart
No i had no problems with the external sd card.
Click to expand...
Click to collapse
Same.
boart said:
I have chosen Philz Touch CWM and im not able to mount my external SD card. Did you guys have the same problem?
I alwys get the message: Can't mount /external_sd/
But internal SD card is working.
Edit: Ok... was able to get access to external SD card with Chenglu's CWM
Click to expand...
Click to collapse
with philz cwm there is also no problem with extsdcard. i can make backups,restore and install from extsdcard
Sent from my GT-I9506 using XDA Premium 4 mobile app
worked a treat
cheers
this morning I got really happy reading this thread :good::good::good::good: - luckily a way to get my I9506 (probably one of the very first delivered ones in germany) rooted
many thanks for generating a way to root!!!!!!!!!!!!!
BTW: Are there already some other modem versions available or does anyone have some experiences with the dfiferent modem versions?
boart said:
I have chosen Philz Touch CWM and im not able to mount my external SD card. Did you guys have the same problem?
I alwys get the message: Can't mount /external_sd/
But internal SD card is working.
Edit: Ok... was able to get access to external SD card with Chenglu's CWM
Click to expand...
Click to collapse
Same problem here. No ext sd card access here with Phils.
Do you remove the sd before going into CWM? Format is exFAT.
Thanks!
Gesendet von meinem GT-I9506 mit Tapatalk 2
puschel_1 said:
Same problem here. No ext sd card access here with Phils.
Do you remove the sd before going into CWM? Format is exFAT.
Thanks!
Gesendet von meinem GT-I9506 mit Tapatalk 2
Click to expand...
Click to collapse
I just used Chenglus CWM. No problem with getting access to the SD Card with it.
Well finally the root is here cheers the beers are on their way..........
Anywho have not done the root yet. Before I do is there a way of backing up what I have no so if something happens(touch wood) I can revert back to what I have now?
Also in a dummies guide sentence what is the knox warranty googled it and still not sure
Cheers
funkyirishman said:
Well finally the root is here cheers the beers are on their way..........
Anywho have not done the root yet. Before I do is there a way of backing up what I have no so if something happens(touch wood) I can revert back to what I have now?
Also in a dummies guide sentence what is the knox warranty googled it and still not sure
Cheers
Click to expand...
Click to collapse
I actually had my contacts saved on the Google account and you can do the same.
Save the SMS with SMS Backup & Restore.
Everything else can be moved to your computer and back.
I then rooted the phone, installed Titanium Backup and went on with a complete apps, data and settings backup.
Even after flashing the NEE firmware everything (but root and CWM) was there without the need of a restore.
Sent from my Samsung Galaxy S4 LTE+ (GT-I9506)
Cheers
Went to load the tar file using odin but when I connected the phone it installed the software and then opened Odin and loaded file and then connected phone but it did not go yellow see below it went a light blue?
Anyone know what maybe causing this?
Hello All Developers and All XDA Members and specially welcome for Galaxy V (SM-G313HZ) User .
Today i want make a tutorial on how to ROOT your Galaxy V 100% Work ! , Compatible with all firmwares of Galaxy V . Many question i saw on XDA thread on how to root this devices , but now i bring to you a solution.
This method is need to use a Custom Kernel that i mod it and created it myself.So lets begin !
REQUIREMENTS
1: USB DRIVER OR KIES . (GOOGLE AND DOWNLOAD IT)
2.ODIN . DOWNLOAD : samsung-updates.com/Odin307.zip
3.My Custom Kernel :
Mod Edit: Links removed
4. VROOT : cdnpic.mgyun.com/files/products/vRoot/1005/2013/17236736/VRoot_1.7.3.4863_english_cid1005_7337ba1e_89.exe
Download all that requirement files and ready to begin with the root process.
ROOT METHOD
1. INSTALL SAMSUNG USB DRIVER TO YOUR PC AND RUN ODIN .
2. CHECK PDA BOX AND INSERT MY CUSTOM KERNEL ON IT (.tar file) . (DO NOT CHECK ANYTHING EXCEPT PDA)
3.NOW WHEN YOU HAVE DONE , POWER OFF GALAXY V INTO DOWNLOAD MODE BY PRESSING POWER+VOLUME DOWN+HOME
4. PLUG IN YOUR DEVICES WITH USB CABLE AND MAKE SURE ODIN DETECTED YOUR PHONE. AND JUST PRESS START . YOU SHOULD BE DONE WITH A FEW SECONDS AND YOUR DEVICES AUTOMATICALLY REBOOT .
5. AFTER THE PHONE SUCCESFULLY REBOOT. THATS MEAN YOU SUCCESSFULLY INSTALL CUSTOM KERNEL. NOW PLUG AGAIN USB CABLE AND OPEN UP VROOT.
6.WAIT UNTIL VROOT DETECTED YOUR PHONE.
7.ONCE YOUR DEVICES HAS BEEN DETECTED CLICK ROOT (THIS PROCESS MAY TAKE SOME TIME)
8.WHEN THE PROCESS IS RUNNING, YOUR DEVICES MUST BE AUTO RESTART AND YOU MUST HAVE SUPERUSER INSTALL ON YOUR DEVICES , THAT MEANS YOU SUCCESSFULLY ROOTED !!
9.INSTALL SUPERUSER APP FROM CHAINFIRE ON PLAY STORE TO UPDATE THE SU BINARY.
AND NOW THERE YOU HAVE IT , YOU SUCCESFULLY ROOT YOUR GALAXY V ! , ENJOY
**WARNING**
DO NOT COPY THIS THREAD! , PLEASE RESPECT ME OF TIRED MAKE IT FOR GALAXY V USER .
IF YOU WANT TO SHARED IT , JUST COPY THIS THREAD LINK AND GIVE THE FULL CREDIT FOR ME .
DO WITH YOUR OWN RISK!
HAPPY ROOTING AND PLEASE PRESS THANKS IF I HELPED !
*NOTE*
AFTER A SUCCESFULLY ROOT MY GALAXY V , IM ON A NEW PROJECT TO CREATE CWM RECOVERY FOR GALAXY V (SM-G313HZ)
COMING SOON !
Sent from my SM-G313HZ using XDA Premium 4 mobile app
@Mohd Haikal : r u sure that the kernel modified by your self ? i think the original modder is from here. And then you COPY it. LOL
Closed for investigation.
Hello..
As the title says this thread is a guide about how to install TWRP on your galaxy core prime VE (G361H).
**I didn't create/build this recovery**
##DISCLAIMER: I'M NOT RESPONSIBLE FOR ANY DAMAGE THAT HAPPENS TO YOU OR TO YOUR PHONE##
#BEFORE you start, go and enable "allow OEM unlock" from development settings..
There is 2 methods to install TWRP, the first one is for rooted users, the second one is for unrooted users (users who want to root their phone using TWRP)
so lets start:
☆METHOD 1 (without ODIN){for rooted users}
1- download the recovery from the link at the end of the thread.
2-download "rashr" from play store, https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2- open rashr and select "recovery from storage".
3- choose the recovery file that you downloaded.
4- confirm to flash the recovery.
5- after flash is successful press "no" and don't press "reboot to recovery" (for saftey use the three button combo).
6- power off your phone, then reboot to recovery by pressing {home button+volume up+power}, once the screen turns on release the power button, and when you see the SeAndroid error at the top release all the buttons.
7- now you have TWRP recovery on your Core Prime VE G361H, so enjoy.
☆METHOD 2 (using ODIN){for non rooted}
*note: this method doesn't need root*
1- download the ODIN flashable recovery.
2- open ODIN as administrator.
3- select AP and choose the recovery file that you downloaded.
4- uncheck "auto reboot".
5- enter download mode using the three buttons combo (home + vol down+ power).
6- connect your phone to your PC.
7- press "start".
8- when you get "pass", unplug from PC and remove the battery.
9- insert the battery and boot into recovery using the three button combo (home+vol up+power).
5- now you have TWRP recovery on your Core Prime VE G361H, so enjoy.
☆Changing the language to English.
in case the recovery opened in russian launguage follow these steps to make it english:
1- the recovery will boot up in Russian language, you'll find a slider at the bottom of the page, slide it.
2- the TWRP recovery interface will show up but in Russian language, so to change it to English select the right option on the third row.
3- TWRP settings will show up, go and choose the last icon on the right side (which shows an earth icon).
4- swipe up and choose english and press the only button on screen to apply the language.
5- now you have TWRP recovery in english on your Core Prime VE G361H, so enjoy.
##Important note: this recovery only works on G361H, and it will cause brick if it's been flashed on other core prime variants like the G361F
##Download links:
☆Method 1 downloads:
1- https://mega.nz/#!vVAVmZJK!PLi5aDTx1NHebkMoMgq5abHpuum3lDdE9Ak4BVgj9lw
2- https://drive.google.com/file/d/0B-agjODzYpwPY2VQWGRnTXU0YjQ/view?usp=docslist_api
☆Method 2 downloads:
1- TWRP recovery v3.0.2.0 latest available TWRP 3.0.1.0 Google drive link
More links will be added soon, just wait till the internet traffic goes down so i can upload it faster..
Special thanks to:
[email protected] 4PDA.ru forums for making this recovery, and thanks for @BoxaS & @rockalber for helping at finding this recovery.
I've got this recovery from here: http://4pda.ru/forum/index.php?showtopic=706142&st=260#entry46723231
THANKS
Sent from my SM-G361H using Tapatalk
Now someone try xposed and let us know.
Gamersab said:
Now someone try xposed and let us know.
Click to expand...
Click to collapse
I tried it, it works, the wanam version...
This one http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
Sent from my GALAXY Core Prime VE (G361H)..
Gamersab said:
Now someone try xposed and let us know.
Click to expand...
Click to collapse
Use the sdk22 one...don't use the 64bit version
Sent from my GALAXY Core Prime VE (G361H)..
Mr said:
I tried it, it works, the wanam version...
This one http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
Sent from my GALAXY Core Prime VE (G361H)..
Click to expand...
Click to collapse
Now you can install the module that directly saves obb to SD card
Gamersab said:
Now you can install the module that directly saves obb to SD card
Click to expand...
Click to collapse
Yes, and i suggest you to try xinternalsd i didn't try it on core prime but it worked perfectly for moving apps data and obbs and media to extsdcard on other phone..
Sent from my GALAXY Core Prime VE (G361H)..
Mr said:
Yes, and i suggest you to try xinternalsd i didn't try it on core prime but it worked perfectly for moving apps data and obbs and media to extsdcard on other phone..
Sent from my GALAXY Core Prime VE (G361H)..
Click to expand...
Click to collapse
I've not faced any memory issue yet since I don't play games except Coc ?
---------- Post added at 09:02 PM ---------- Previous post was at 09:02 PM ----------
Did you try flashing something ?
Gamersab said:
I've not faced any memory issue yet since I don't play games except Coc ?
---------- Post added at 09:02 PM ---------- Previous post was at 09:02 PM ----------
Did you try flashing something ?
Click to expand...
Click to collapse
So do i, don't need those memory modules on my SGCPVE...
Xposes was enough as a flash experiment...so i see it's working perfectly till now
Sent from my GALAXY Core Prime VE (G361H)..
Mr said:
So do i, don't need those memory modules on my SGCPVE...
Xposes was enough as a flash experiment...so i see it's working perfectly till now
Sent from my GALAXY Core Prime VE (G361H)..
Click to expand...
Click to collapse
Thanks man XinternalSD usable for me thanks
Sent from my SM-G361H using Tapatalk
Thanks man!
G361H Twrp3.0.0-0 recovery and root Succeed Flash by Odin
Good News
i repack TWRP 3.0.0-0 Recovery for G361H android 5.1.1 and Flash it by Odin without ROOT and recovery is work good and Succeed
note:
1-after flash this recovery image and go to TWRP 3.0.0-0 recovery, your default Language is RU . you can change your language by tap on Setting and change language to English or other language that i attach learning picture hare.
2-you can install Super user when you will quit from TWRP recovery that ask from you to root your phone.
3- i flash this recovery and test it and working well on my G361H phone by android 5.1.1 chipset sc8830 board sc7730se(All Test Is OK )
4-if you can not Root Phone succeed by TWRP Quit menu or have SU binary error , please copy attached "SuperSU_Flash_Zip_v2.67_Beta" zip file to SD card then Flash it by TWRP recovery (install it from twrp menu ) then your phone is root by latest SuperSU(i test it and root succeed)
info and download link:
http://forum.xda-developers.com/showpost.php?p=65321969&postcount=202
Why did apps become incredibly slow after flashing TWRP, and what do I do about it? Wiping dalvik did not help. Seems often when I root or flash recoveries it slows down my device, was the same thing on S3.
evilperro said:
Why did apps become incredibly slow after flashing TWRP, and what do I do about it? Wiping dalvik did not help. Seems often when I root or flash recoveries it slows down my device, was the same thing on S3.
Click to expand...
Click to collapse
Recovery isn't related to the system as it's installed on a separate partition, i (since 2010) haven't faced any kind of slowness after flashing a recovery till today, so there must be another reason for this slowness but not the recovery.
Sent from my GALAXY Core Prime VE (G361H)..
Mr said:
Recovery isn't related to the system as it's installed on a separate partition, i (since 2010) haven't faced any kind of slowness after flashing a recovery till today, so there must be another reason for this slowness but not the recovery.
Sent from my GALAXY Core Prime VE (G361H)..
Click to expand...
Click to collapse
Yes I've heard that before, but still in my experience, almost without fail, the slowness begins after one of these two operations. The whole OS is laggy now.
edit: My mistake, I also flashed MoAB. After uninstalling it everything is fast.
hiiii please make a tutorial and post on youtube pleeeessseee bro .. i neeeddd TWR
:good:
Mr said:
I tried it, it works, the wanam version...
This one http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
Sent from my GALAXY Core Prime VE (G361H)..[/QUOTEhiiii
please make a tutorial and post on youtube pleeeessseee bro .. i neeeddd TWRP i try to flah with Rashr . when i switch off my sm-g361h its says (FTTP unlocke ) like that what should i do please maile me my email id is [email protected]
---------- Post added at 08:43 PM ---------- Previous post was at 08:15 PM ----------
please make a toturial and post it on youtubr
Click to expand...
Click to collapse
Mr said:
Recovery isn't related to the system as it's installed on a separate partition, i (since 2010) haven't faced any kind of slowness after flashing a recovery till today, so there must be another reason for this slowness but not the recovery.
Sent from my GALAXY Core Prime VE (G361H)..
Click to expand...
Click to collapse
Mr bluwe please help me i need your help i want to know some thing please contect me on whatsapp my whatsapp number is +919939139461 please help me....please
sm6361hu
is this working on sm g361hu
Mr said:
Hello..
As the title says this thread is a guide about how to install TWRP on your galaxy core prime VE (G361H).
**I didn't create/build this recovery**
##DISCLAIMER: I'M NOT RESPONSIBLE FOR ANY DAMAGE THAT HAPPENS TO YOU OR TO YOUR PHONE##
#BEFORE you start, go and enable "allow OEM unlock" from development settings..
so lets start:
☆METHOD 1 (without ODIN)
1- download tge recovery from the link at the end of the thread.
2-download "rashr" from play store, https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools.
2- open rashr and select "recovery from storage".
3- choose the recovery file that you downloaded.
4- confirm to flash the recovery.
5- after flash is successful press "no" and don't press "reboot to recovery" (for saftey use the three button combo).
6- power off your phone, then reboot to recovery by pressing {home button+volume up+power}, once the screen turns on release the power button, and when you see the SeAndroid error at the top release all the buttons.
7- the recovery will boot up in Russian language, you'll find a slider at the bottom of the page, slide it.
8- the TWRP recovery interface will show up but in Russian language, so to change it to English select the right option on the third row.
9- TWRP settings will show up, go and choose the last icon on the right side (which shows an earth icon).
10- swipe up and choose english and press the only button on screen to apply the language.
11- now you have TWRP recovery on your Core Prime VE G361H, so enjoy.
☆METHOD 2 (using ODIN)
*note: this method doesn't need root*
1- download the ODIN flashable recovery.
2- open ODIN as administrator.
3- select AP and choose the recovery file that you downloaded.
4- uncheck "auto reboot".
5- enter download mode using the three buttons combo (home + vol down+ power).
6- connect your phone to your PC.
7- press "start".
8- when you get "pass", unplug from PC and remove the battery.
9- insert the battery and boot into recovery using the three button combo (home+vol up+power).
##Important note: this recovery only works on G361H, and it will cause brick if it's been flashed on other core prime variants like the G361F
##Download links:
☆Method 1 downloads:
1- https://mega.nz/#!vVAVmZJK!PLi5aDTx1NHebkMoMgq5abHpuum3lDdE9Ak4BVgj9lw
2- https://drive.google.com/file/d/0B-agjODzYpwPY2VQWGRnTXU0YjQ/view?usp=docslist_api
☆Method 2 downloads:
1- https://drive.google.com/file/d/0B-agjODzYpwP****bWI3dVd4U2c/view?usp=docslist_api
More links will be added soon, just wait till the internet traffic goes down so i can upload it faster..
*Sorry for not adding images, but I've had some problem in uploading them on XDA...
Special thanks to:
[email protected] 4PDA.ru forums for making this recovery, and thanks for @BoxaS & @rockalber for finding this recovery.
I've got this recovery from here: http://4pda.ru/forum/index.php?showtopic=706142&st=260#entry46723231
Click to expand...
Click to collapse
Thank you!!! Thank you!!! Thank you!!!Thank you!!! i have been waiting such a long time for this.... and you were the only savior ... and you did what you said...thanks a lot!!! this is working flawlessly.... this is the last and easiest method to root this phone and in my opinion don't go for thr pre rooted roms and brick your phone.this method is guaranteed for me..
update 3.0.2.0 twrp plz!