Hello all.
I'd like to know if there's any custom roms for Karbonn A2+. I'm already guessing the answer is a "No" so I'd like to know if/how I can port any rom with JB firmware and any CWM to my device (Please tell me what rom should I take to port
The device runs on 4.0.4 ICS, with 1ghz 256mb ram, and a 4" WVGA capacitive touch screen. I've rooted it via Framaroot and am using an additional 1gb of swapped ram.
Thanks in advance.
Bump, is there anyone who can point me to the correct guide to follow?
Your phone?
What is your phone?
I mean what phone are you using?
the model and the brand?
I'm facing the same problem.
hardware config.of a2+are- mt6575 with kernel 3.0.13
brand- alps , model- A2+
hey guys.. i got karbonn A2+ replaced via company..
they have gave me mt6577 board with 1.3 Ghz and jellyfish 4.2.2
shantz said:
hey guys.. i got karbonn A2+ replaced via company..
they have gave me mt6577 board with 1.3 Ghz and jellyfish 4.2.2
Click to expand...
Click to collapse
Interesting, could you please dump the rom?
"Jellyfish"?
Root & cwm for karbonn a2+
It is a simple procedure, but it took long time for me to make it work.
Points to consider
a. After flashing my phone didn’t boot. I just flashed only the recovery, I think that would caused the problem, later I re-flashed the stock rom boot img separately).worked !
b. Instead of backup copy I tried with the stock rom imgs, It worked for me. If you don’t want to lose any data please use your phone backup copy img files.
c. I am not a developer & don’t know how the stuffs work inside the mobile, with the help of XDA contributors & developers forum messages, I was able to do something.
d. Please do read the rooting & flashing guides thoroughly.
e. Please don’t panic if something goes wrong. Stock rom is available, flash it & you get your mobile back.
ROOTING & BACK UP
1.Frama root will give you the root rights ! - http://forum.xda-developers.com/showthread.php?t=2130276
Download & Install - open it choose install super user, then click "boromir" success message will appear, click ok and reboot your phone. You can see a message "android is updating" after you reboot your phone.
2. Dowload MTKdroid lastest version (older version also fine)-sorry I couldn’t find any working links
Backup your stock rom using MTK droid tool, before making any changes to the stock OS. MTK droid tool may ask you to root again. Please read rooting and flashing instructions thoroughly before doing any changes.
a. Install MTKdroid tool in your pc & open it, If the tool asks you to root, click root, in couple sec or mins yellow signal will turn green.
b. Click on the “Root,backup,recovery & then click backup – Please wait till the process completes
If the message says “end with error” – The backup copy will not help us to re-flash the OS
(I tried many times, but I am not able to flash the backup copy with SP flash tool, gives me some error.
(for making CWM the above copy is fine, because I hope there won’t be any error when the software creates a backup for boot.img & recovery.img)
c. Ok assuming that there is no error, the next step is Click on the button “To prepare blocks for Flash tool” – wait till it completes. This process will gives us the entire copy of the rom to flash it with SP flash tool – Can find the backups in MTKdroid tools /backups/ Karbonn-A2+_number _date_backup_ folder/file to flash tool. (MTKdroid tool is required to create CWM, so don’t close the MTKdroid tool)
d. No stock roms were available when I was testing that time, so I ended up with the service center. Thanks to XDA member “Forever Alone”. Now working stock rom is available.
3.CWM CREATING & PORTING
a. Select “To choose the boot.img file & click recovery & boot. Software will ask you to select the boot.img. Select the boot.img from the backup copy in MTKdroid tools /backups/Karbonn-A2+_ _backup_ /file to flash tool.
b. Click Yes - To make CWM automaticllay
C. Click yes - If phone isn't loaded, it is ness to flash this file...to phone? Software may show a write error, just leave it for now.
e. Click NO - Install created recovery to phone ?
Copy of the recovery & boot img will be in MTKdroid tools /recovery
Now CWM has been created & that needs to flashed via SP flash tool
4. Flashing CWM recovery
Download SP flashtool - http://forum.xda-developers.com/showthread.php?t=1982576
Copy the scatter file from Mtkdroid backup folder to mtkdroid recovery folder to avoid confusion in selecting the image files.
Open SP flashtool – Select the scatter file from mtkdroid recovery folder & flash it. You are done. Now you can see the auto made CWM instead of stock recovery
attachment has screen shots-please refere that to this section
5.Download the stock rom from - http://forum.xda-developers.com/showthread.php?t=2520719
Extract the files & store it in separate folder.
Any custom rom for karbonn a2+
how can i install custom roms on karbonn a2+ i rooted my mobile and i have cmw recovery on my mobile.. any os available for karbonn a2+. karbonn a1+ support custom xperia rom but y any one make custom for karbonn a2+. plzz kindly help me..
hi.. im using karbonn a2+ mtk 6575 device .i downlaod lewa os for karbonn a11 as same specification of karbonn a2+. but installed that succefully. but stuck in boot logo..but im not ported this rom.i just change boot image only.. what is the problem??
hi bro im mtk developer. we can port rom for a2+
Sent from my Karbonn A2+ using XDA Free mobile app
hi
Sent from my Karbonn A2+ using XDA Free mobile app
i ported two roms
ViKtory36 said:
Bump, is there anyone who can point me to the correct guide to follow?
Click to expand...
Click to collapse
hii
Custom ROM
Guys I found an awesome website for Getting custom ROMs for almost all karbonn and celkon devices try it..................
h t t p://androcustomroms.com/
Can you tell me step by step how to gain root access to karbonn A2?
Sent from my HTC Desire 616 dual sim using XDA Free mobile app
[email protected] said:
how can i install custom roms on karbonn a2+ i rooted my mobile and i have cmw recovery on my mobile.. any os available for karbonn a2+. karbonn a1+ support custom xperia rom but y any one make custom for karbonn a2+. plzz kindly help me..
Click to expand...
Click to collapse
can you please post here the cwm recovery image for karbonn a2+ here..
My karbonn a2+ show this while installing
E:signature verification failed
Installation aborted.
what to do now?
It doesn't work with any ROM.
Hi all ,
I want to install the latest CWM recovery so that i can try out CM11. Presently I have a rooted P500 with LG Gingerbread 2.3.3 V20d India. After searching i found that lgdmp tool method in this thread http://forum.xda-developers.com/showthread.php?t=1318750 but the clockworkrecovery file links are all dead . I understood that the recovery and partition file both are needed but after searching for many hours also i can only find the recovery image files in other recovery zips. Using ROM manager is also being discouraged . I tried it also but it shows only LG P500 (old BB option).Please request to help me and guide me in flashing a custom recovery .Any help will be highly appreciated.
Thanks and Regards
Here is a tutorial http://forum.xda-developers.com/showthread.php?t=1146566
Hello experts !
Before some days , I tried installing CWM RECOVERY on my rk2928 device . Then i boot into recovery , and I got nothing . Before installing CWM RECOVERY i can simply get boot into my Android Stock Recovery .
I have my Stock ROM (.img) but how did I install it ? Now I don't have Stock or Custom Recovery ..,,
I tried pressing different buttons to get recovery also through adb ( adb reboot recovery )
Also Using this XDA Method I also build a Custom ROM but I am Helpless to try on my device !
Device info :
Rooted , SuperSu installed :good:
HCL ME Sync 1.0 (rockchip 2928)
4.1.1 JB Stock rom
How can i get recovery
OR
How can i install stock or custom rom ?
Please don't neglect me because of I am a junior member in XDA
Replays are highly appreciated
Hi there,
I'm sorry but I can't find anything related to your question/device:
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Can i flash sp flashable zip files from directly my custom recovery ? My device is Micromax A120 KitKat variant with 8GB internal memory and it is rooted.
Hello,
Welcome to XDA.
No you can't flash SP Flashtool ROMs in recovery but you can try the instructions in the link below, post your questions in that thread if you need help.
http://forum.xda-developers.com/showthread.php?t=2276056
The experts there may be able to help. Good luck.
pls developers i need detailed tutorial on how to create custom recovery for mtk and spd phones from android 6.0 up,most tutorial i see online are outdated using mtkdroid tool and for for 5.1 and below... i need mainly how to create philz or ctrl or cmw recovery...i will be glad for the help...