Hey all, so I've built out a development environment and have followed tutorials on how to build CM10.2 from source. I would consider myself an advanced Linux user and things have been going well with the exception of these compliation errors. Any help troubleshooting these would be greatly appreciated.
Code:
target thumb C++: libc <= bionic/libc/bionic/pthread_debug.cpp
cc1plus: warning: command line option '-std=gnu99' is valid for C/ObjC but not for C++ [enabled by default]
make[3]: *** [linux] Error 2
make[2]: *** [headers_install] Error 2
make[1]: *** [sub-make] Error 2
make[1]: Leaving directory `/home/c0pp3r/android/cm10.2/kernel/htc/msm8960'
make: *** [/home/c0pp3r/android/cm10.2/out/target/product/evita/obj/KERNEL_OBJ/usr] Error 2
make: *** Waiting for unfinished jobs....
bionic/libc/bionic/pthread_debug.cpp:545:13: warning: 'void hashmap_removeEntry(HashTable*, HashEntry*)' defined but not used [-Wunused-function]
[email protected]:/home/c0pp3r/android/cm10.2#
You might get a better response in the Android Software/Hacking Development forum.
Sent from my Evita
Thanks for the tip. I'll do that.
Related
Hello. When i try compile my kernel i got some errors
i'm on ubuntu 10.04, 10.10, 11.04, 11.10.
I'm using theese commands:
Code:
make ARCH=arm iconiaa500_defconfig
with no problems it says 'configuration written to .config' then i cant find that file.
whet i try to compile it with this command
Code:
make ARCH=arm CROSS_COMPILE=/home/myhomedir./A500-kernel/toolchains/arm-2009q3/bin/arm-none-eabi- -j3
then at the end i get something like:
Code:
drivers/usb/host/ehci-hub.c:130: warning: 'ehci_adjust_port_wakeup_flags' defined but not used
drivers/usb/host/ehci-lpm.c:20: warning: 'ehci_lpm_set_da' defined but not used
drivers/usb/host/ehci-lpm.c:40: warning: 'ehci_lpm_check' defined but not used
net/mac80211/tx.c: In function 'ieee80211_subif_start_xmit':
net/mac80211/tx.c:1753: warning: unused variable 'mppath'
arch/arm/boot/compressed/piggy.lzo.S: Assembler messages:
arch/arm/boot/compressed/piggy.lzo.S:4: Error: file not found: arch/arm/boot/compressed/piggy.lzo
make[2]: *** [arch/arm/boot/compressed/piggy.lzo.o] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [arch/arm/boot/compressed/vmlinux] Error 2
make: *** [zImage] Error 2
make: *** Waiting for unfinished jobs....
anyone knows whats problem? thanks for spending some time. Sorry for bad english.
I was try many guides include nethams and sp3dev's
HTML:
http://forum.xda-developers.com/showthread.php?t=1158260&page=24
HTML:
http://forum.xda-developers.com/showthread.php?t=1158260&page=9
I'm using astarasikov-iconia-gnu-kernel source.
Sorry for bad English.
Hi, i'm trying to build P.a.c. man rom on unsupported device, htc desire hd.
foreword, i need to say that its my first time compiling a rom, im a noob, yes, but i want to improve.
when i try to compile from pac script, when it comes to kernel building, i get this error:
cc1: error: unrecognized command line option '-mno-unaligned-access'
/home/marco/android/kernel/htc/htc7x30-3.0/scripts/mod/empty.c:1:0: warning: switch -mcpu=cortex-a8 conflicts with -march=armv5t switch [enabled by default]
/home/marco/android/kernel/htc/htc7x30-3.0/scripts/mod/empty.c:1:0: sorry, unimplemented: Graphite loop optimizations cannot be used (-fgraphite, -fgraphite-identity, -floop-block, -floop-flatten, -floop-interchange, -floop-strip-mine, -floop-parallelize-all, and -ftree-loop-linear)
make[4]: *** [scripts/mod/empty.o] Errore 1
make[3]: *** [scripts/mod] Errore 2
make[2]: *** [scripts] Errore 2
make[1]: *** [sub-make] Errore 2
make[1]: uscita dalla directory "/home/marco/android/kernel/htc/htc7x30-3.0"
make: *** [TARGET_KERNEL_BINARIES] Errore 2
make: *** Attesa per i processi non terminati....
target StaticLib: libc_nomalloc (/home/marco/android/out/target/product/ace/obj/STATIC_LIBRARIES/libc_nomalloc_intermediates/libc_nomalloc.a)
Total time elapsed: 46 minutes (2787.207300735 seconds)
i attach a pastebin log for more information.
hope someone will help..thanks!
Setup my build environment according to this post
http://forum.xda-developers.com/showthread.php?t=2639611
and trying to build this ROM
https://github.com/CarbonDev/android
I got a build error mid way
HTML:
hardware/qcom/display/msm8974/liboverlay/overlayMdp.cpp: In member function 'void overlay::MdpCtrl::setColor(uint32 _t)':
hardware/qcom/display/msm8974/liboverlay/overlayMdp.cpp:105:13: error: 'struct mdp_overlay' has no member named 'bg _color'
make: *** [/root/carbon/out/target/product/hammerhead/obj/SHARED_LIBRARIES/liboverlay_intermediates/overlayMdp.o] E rror 1
make: *** Waiting for unfinished jobs....
target thumb C++: liboverlay <= hardware/qcom/display/msm8974/liboverlay/overlayMdssRot.cpp
make: *** wait: No child processes. Stop.
I google and got this suggesting
Try switching hardware/qcom/display to cyanogenmod 's version
What file do I edit to change this?
Thanks.
Hello everyone,
I´m trying compile form PA4+ repos. I follow the step in this guide (http://forum.xda-developers.com/moto-g/development/4-4-4-nightlies-paranoid-4-4-motorola-t2792041)
But no matter what I do always get the following error:
Code:
host Executable: clang (/home/levis/paranoid/out/host/linux-x86/obj/EXECUTABLES/clang_intermediates/clang)
CC drivers/cpufreq/cpufreq_interactive.o
CC drivers/cpufreq/freq_table.o
../../../../../../kernel/motorola/msm8226/drivers/cpufreq/cpufreq_interactive.c: In function 'show_target_loads':
../../../../../../kernel/motorola/msm8226/drivers/cpufreq/cpufreq_interactive.c:813:6: warning: operation on 'ret' may be undefined [-Wsequence-point]
error, forbidden warning: cpufreq_interactive.c:813
make[4]: *** [drivers/cpufreq/cpufreq_interactive.o] Error 1
make[4]: *** Waiting for unfinished jobs....
make[3]: *** [drivers/cpufreq] Error 2
make[2]: *** [drivers] Error 2
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [sub-make] Error 2
make[1]: Leaving directory `/home/levis/paranoid/kernel/motorola/msm8226'
make: *** [TARGET_KERNEL_BINARIES] Error 2
make: *** Waiting for unfinished jobs....
Total time elapsed: 32 minutes (1937.343507123 seconds)
file does not exist or wrong directory located
Please Could you point me in the right direction.
- Solution 1
Delete the all folder (Yeah .. that's a shame ..) and resync again.
- Solution 2
Check if all the depency software is correctly installed.
- Solution 3
Use a prebuilt kernel
Code:
cd /yourpathtothesources/kernel/motorola/msm8226
make -j4 O=out
cp -R /yourpathtothesources/kernel/motorola/msm8226/out/* /yourpathtothesources/out/target/product/falcon/obj/KERNEL_OBJ
cp /yourpathtothesources/kernel/motorola/msm8226/out/arch/arm/boot/zImage /yourpathtothesources/out/target/product/falcon/kernel
Hope that's help.
Try first solution first !
thank you very much for your quick response. I will prove what you said and will post the results
Thanks +h2o64 , Whith the Solution 1, was perfect. Now I have installed and working my own compiled version.
levis_ap said:
Thanks +h2o64 , Whith the Solution 1, was perfect. Now I have installed and working my own compiled version.
Click to expand...
Click to collapse
Congrats! There is a new Linaro build toolchain! Personally I clean my entire build directory today
Sent from my Moto G using XDA Free mobile app
Hi every body, I am trying to compile kernel for SamSung Galaxy S5 (SM-G906K).
I always get this error message, i don't know how to solve it. Please help me !
Thank you all!
________________________________________________________
/home/vip7009pro/Kernel2/drivers/gpu/gpu_sysfs/Kbuild:29: **** Make sure target file is defined. Check the TARGET and GPU configs in Makefile and Kernel Config. Module won't work without target file. ****
scripts/Makefile.clean:17: /home/vip7009pro/Kernel2/drivers/media/isdbt/fc8150/Makefile: No such file or directory
make[4]: *** No rule to make target `/home/vip7009pro/Kernel2/drivers/media/isdbt/fc8150/Makefile'. Stop.
make[3]: *** [drivers/media/isdbt/fc8150] Error 2
make[2]: *** [drivers/media/isdbt] Error 2
make[1]: *** [drivers/media] Error 2
make: *** [_clean_drivers] Error 2
[email protected]:~/Kernel2$ make mrproper
/home/vip7009pro/Kernel2/drivers/gpu/gpu_sysfs/Kbuild:29: **** Make sure target file is defined. Check the TARGET and GPU configs in Makefile and Kernel Config. Module won't work without target file. ****
scripts/Makefile.clean:17: /home/vip7009pro/Kernel2/drivers/media/isdbt/fc8150/Makefile: No such file or directory
make[4]: *** No rule to make target `/home/vip7009pro/Kernel2/drivers/media/isdbt/fc8150/Makefile'. Stop.
make[3]: *** [drivers/media/isdbt/fc8150] Error 2
make[2]: *** [drivers/media/isdbt] Error 2
make[1]: *** [drivers/media] Error 2
make: *** [_clean_drivers] Error 2
_________________________________________